From 55249cf750e4d9be19c7f8afd502c9ca42de8858 Mon Sep 17 00:00:00 2001 From: Jonathan McDowell Date: Tue, 13 Feb 2007 22:09:02 +0100 Subject: i2c-parport: Add support for One For All remote JP1 interface This simple patch adds support to i2c-parport for the One For All remote JP1 parallel port interfaces which can be found detailed at: http://www.hifi-remote.com/jp1/hardware.shtml These allow access to the internal configuration EEPROM on various remote controls and there are a variety of Windows tools that make use of this hardware. I have tested this patch with the "simple" parallel port device and a One For All URC-7562 and confirmed that the data read using the eeprom i2c driver matches that returned by the Windows "IR" JP1 tool. Signed-off-by: Jonathan McDowell Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-parport.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/i2c/busses/i2c-parport.h') diff --git a/drivers/i2c/busses/i2c-parport.h b/drivers/i2c/busses/i2c-parport.h index 9ddd816d5d0..ed69d846cb9 100644 --- a/drivers/i2c/busses/i2c-parport.h +++ b/drivers/i2c/busses/i2c-parport.h @@ -88,6 +88,13 @@ static struct adapter_parm adapter_parm[] = { .getscl = { 0x40, STAT, 0 }, .init = { 0xfc, DATA, 0 }, }, + /* type 7: One For All JP1 parallel port adapter */ + { + .setsda = { 0x01, DATA, 0 }, + .setscl = { 0x02, DATA, 0 }, + .getsda = { 0x80, STAT, 1 }, + .init = { 0x04, DATA, 1 }, + }, }; static int type = -1; @@ -101,4 +108,5 @@ MODULE_PARM_DESC(type, " 4 = ADM1032 evaluation board\n" " 5 = ADM1025, ADM1030 and ADM1031 evaluation boards\n" " 6 = Barco LPT->DVI (K5800236) adapter\n" + " 7 = One For All JP1 parallel port adapter\n" ); -- cgit v1.2.3-70-g09d2