From b007a3ef958413736a9e2ba698ad6675a9d519ab Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 7 Aug 2012 12:27:24 +0100 Subject: i2c: nomadik: Add default configuration into the Nomadik I2C driver At this moment in time there is only one known configuration for the Nomadik I2C driver. By not holding that configuration in the driver adds some unnecessary overhead in platform code. The configuration has already been removed from platform code, this patch checks for any over-riding configurations. If there aren't any, the default is used. [LinusW says: "Right now this is causing boot regressions so we need it badly..."] Acked-by: srinidhi kasagar Acked-by: Linus Walleij Signed-off-by: Lee Jones Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-nomadik.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index 5e6f1eed4f8..61b00edacb0 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -350,10 +350,6 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev) i2c_clk = clk_get_rate(dev->clk); - /* fallback to std. mode if machine has not provided it */ - if (dev->cfg.clk_freq == 0) - dev->cfg.clk_freq = 100000; - /* * The spec says, in case of std. mode the divider is * 2 whereas it is 3 for fast and fastplus mode of @@ -911,20 +907,32 @@ static const struct i2c_algorithm nmk_i2c_algo = { .functionality = nmk_i2c_functionality }; +static struct nmk_i2c_controller u8500_i2c = { + /* + * Slave data setup time; 250ns, 100ns, and 10ns, which + * is 14, 6 and 2 respectively for a 48Mhz i2c clock. + */ + .slsu = 0xe, + .tft = 1, /* Tx FIFO threshold */ + .rft = 8, /* Rx FIFO threshold */ + .clk_freq = 400000, /* fast mode operation */ + .timeout = 200, /* Slave response timeout(ms) */ + .sm = I2C_FREQ_MODE_FAST, +}; + static atomic_t adapter_id = ATOMIC_INIT(0); static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id) { int ret = 0; - struct nmk_i2c_controller *pdata = - adev->dev.platform_data; + struct nmk_i2c_controller *pdata = adev->dev.platform_data; struct nmk_i2c_dev *dev; struct i2c_adapter *adap; - if (!pdata) { - dev_warn(&adev->dev, "no platform data\n"); - return -ENODEV; - } + if (!pdata) + /* No i2c configuration found, using the default. */ + pdata = &u8500_i2c; + dev = kzalloc(sizeof(struct nmk_i2c_dev), GFP_KERNEL); if (!dev) { dev_err(&adev->dev, "cannot allocate memory\n"); -- cgit v1.2.3-70-g09d2 From 33ec5e818b7b0d0d02864a9586050c6f9a6a8b98 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 26 Jun 2012 18:45:32 -0700 Subject: I2C: OMAP: xfer: fix runtime PM get/put balance on error In omap_i2c_xfer(), ensure pm_runtime_put() is called, even on failure. Without this, after a failed xfer, the runtime PM usecount will have been incremented, but not decremented causing the usecount to never reach zero after a failure. This keeps the device always runtime PM enabled which keeps the enclosing power domain active, and prevents full-chip retention/off from happening during idle. Signed-off-by: Kevin Hilman Reviewed-by: Shubhrajyoti D Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-omap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 6849635b268..5d19a49803c 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -584,7 +584,7 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) r = pm_runtime_get_sync(dev->dev); if (IS_ERR_VALUE(r)) - return r; + goto out; r = omap_i2c_wait_for_bb(dev); if (r < 0) -- cgit v1.2.3-70-g09d2 From ab5625c30a0a3c8a8491b641c939575c84bc0dbb Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 9 Aug 2012 08:47:20 -0700 Subject: i2c: diolan-u2c: Fix master_xfer return code The master_xfer function returns 0 on success. It should return the number of successful transactions. Signed-off-by: Guenter Roeck Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-diolan-u2c.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-diolan-u2c.c b/drivers/i2c/busses/i2c-diolan-u2c.c index aedb94f34bf..dae3ddfe761 100644 --- a/drivers/i2c/busses/i2c-diolan-u2c.c +++ b/drivers/i2c/busses/i2c-diolan-u2c.c @@ -405,6 +405,7 @@ static int diolan_usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, } } } + ret = num; abort: sret = diolan_i2c_stop(dev); if (sret < 0 && ret >= 0) -- cgit v1.2.3-70-g09d2 From 371e67c9e1a82b5fd8110b9a25e36bbc3a99e8c7 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Sat, 18 Aug 2012 17:49:58 +0530 Subject: i2c: tegra: protect suspend/resume callbacks with CONFIG_PM_SLEEP The CONFIG_PM doesn't actually enable any of the PM callbacks, it only allows to enable CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME. This means if CONFIG_PM is used to protect system sleep callbacks then it may end up unreferenced if only runtime PM is enabled. Hence protecting sleep callbacks with CONFIG_PM_SLEEP. Signed-off-by: Laxman Dewangan Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-tegra.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 66eb53fac20..9a08c57bc93 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -712,7 +712,7 @@ static int __devexit tegra_i2c_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int tegra_i2c_suspend(struct device *dev) { struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev); -- cgit v1.2.3-70-g09d2