From 11938c929022bb92b1a42f5e1289524a1e465dc0 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 24 Mar 2009 23:22:44 +0100 Subject: ide: move device settings code to ide-devsets.c Remove stale comment from ide.c while at it. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/ide/Makefile') diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index 1c326d94aa6..83a970ee4bf 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -5,7 +5,8 @@ EXTRA_CFLAGS += -Idrivers/ide ide-core-y += ide.o ide-ioctls.o ide-io.o ide-iops.o ide-lib.o ide-probe.o \ - ide-taskfile.o ide-pm.o ide-park.o ide-pio-blacklist.o ide-sysfs.o + ide-taskfile.o ide-pm.o ide-park.o ide-pio-blacklist.o \ + ide-sysfs.o ide-devsets.o # core IDE code ide-core-$(CONFIG_IDE_TIMINGS) += ide-timings.o -- cgit v1.2.3-70-g09d2 From 7eeaaaa52285d5e6cb79f515e99c591dcb9d04fe Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 24 Mar 2009 23:22:46 +0100 Subject: ide: move xfer mode tuning code to ide-xfer-mode.c * Move xfer mode tuning code to ide-xfer-mode.c. * Add CONFIG_IDE_XFER_MODE config option to be selected by host drivers that support xfer mode tuning. * Add CONFIG_IDE_XFER_MODE=n static inline versions of ide_set_pio() and ide_set_xfer_rate(). * Make IDE_TIMINGS and BLK_DEV_IDEDMA config options select IDE_XFER_MODE, also add explicit selects for few host drivers that need it. * Build/link ide-xfer-mode.o and ide-pio-blacklist.o (it is needed only by ide-xfer-mode.o) only if CONFIG_IDE_XFER_MODE=y. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 8 ++ drivers/ide/Makefile | 4 +- drivers/ide/ide-lib.c | 240 ------------------------------------------ drivers/ide/ide-xfer-mode.c | 246 ++++++++++++++++++++++++++++++++++++++++++++ include/linux/ide.h | 12 ++- 5 files changed, 263 insertions(+), 247 deletions(-) create mode 100644 drivers/ide/ide-xfer-mode.c (limited to 'drivers/ide/Makefile') diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 5ea3bfad172..640c9920724 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -56,8 +56,12 @@ if IDE comment "Please see Documentation/ide/ide.txt for help/info on IDE drives" +config IDE_XFER_MODE + bool + config IDE_TIMINGS bool + select IDE_XFER_MODE config IDE_ATAPI bool @@ -698,6 +702,7 @@ config BLK_DEV_IDE_PMAC_ATA100FIRST config BLK_DEV_IDE_AU1XXX bool "IDE for AMD Alchemy Au1200" depends on SOC_AU1200 + select IDE_XFER_MODE choice prompt "IDE Mode for AMD Alchemy Au1200" default CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA @@ -871,6 +876,7 @@ config BLK_DEV_ALI14XX config BLK_DEV_DTC2278 tristate "DTC-2278 support" + select IDE_XFER_MODE select IDE_LEGACY help This driver is enabled at runtime using the "dtc2278.probe" kernel @@ -902,6 +908,7 @@ config BLK_DEV_QD65XX config BLK_DEV_UMC8672 tristate "UMC-8672 support" + select IDE_XFER_MODE select IDE_LEGACY help This driver is enabled at runtime using the "umc8672.probe" kernel @@ -915,5 +922,6 @@ endif config BLK_DEV_IDEDMA def_bool BLK_DEV_IDEDMA_SFF || \ BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA + select IDE_XFER_MODE endif # IDE diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index 83a970ee4bf..d0976e6ee09 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -5,10 +5,10 @@ EXTRA_CFLAGS += -Idrivers/ide ide-core-y += ide.o ide-ioctls.o ide-io.o ide-iops.o ide-lib.o ide-probe.o \ - ide-taskfile.o ide-pm.o ide-park.o ide-pio-blacklist.o \ - ide-sysfs.o ide-devsets.o + ide-taskfile.o ide-pm.o ide-park.o ide-sysfs.o ide-devsets.o # core IDE code +ide-core-$(CONFIG_IDE_XFER_MODE) += ide-pio-blacklist.o ide-xfer-mode.o ide-core-$(CONFIG_IDE_TIMINGS) += ide-timings.o ide-core-$(CONFIG_IDE_ATAPI) += ide-atapi.o ide-core-$(CONFIG_BLK_DEV_IDEPCI) += setup-pci.o diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 09526a0de73..f6c683dd298 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -5,163 +5,6 @@ #include #include -static const char *udma_str[] = - { "UDMA/16", "UDMA/25", "UDMA/33", "UDMA/44", - "UDMA/66", "UDMA/100", "UDMA/133", "UDMA7" }; -static const char *mwdma_str[] = - { "MWDMA0", "MWDMA1", "MWDMA2" }; -static const char *swdma_str[] = - { "SWDMA0", "SWDMA1", "SWDMA2" }; -static const char *pio_str[] = - { "PIO0", "PIO1", "PIO2", "PIO3", "PIO4", "PIO5" }; - -/** - * ide_xfer_verbose - return IDE mode names - * @mode: transfer mode - * - * Returns a constant string giving the name of the mode - * requested. - */ - -const char *ide_xfer_verbose(u8 mode) -{ - const char *s; - u8 i = mode & 0xf; - - if (mode >= XFER_UDMA_0 && mode <= XFER_UDMA_7) - s = udma_str[i]; - else if (mode >= XFER_MW_DMA_0 && mode <= XFER_MW_DMA_2) - s = mwdma_str[i]; - else if (mode >= XFER_SW_DMA_0 && mode <= XFER_SW_DMA_2) - s = swdma_str[i]; - else if (mode >= XFER_PIO_0 && mode <= XFER_PIO_5) - s = pio_str[i & 0x7]; - else if (mode == XFER_PIO_SLOW) - s = "PIO SLOW"; - else - s = "XFER ERROR"; - - return s; -} -EXPORT_SYMBOL(ide_xfer_verbose); - -/** - * ide_rate_filter - filter transfer mode - * @drive: IDE device - * @speed: desired speed - * - * Given the available transfer modes this function returns - * the best available speed at or below the speed requested. - * - * TODO: check device PIO capabilities - */ - -static u8 ide_rate_filter(ide_drive_t *drive, u8 speed) -{ - ide_hwif_t *hwif = drive->hwif; - u8 mode = ide_find_dma_mode(drive, speed); - - if (mode == 0) { - if (hwif->pio_mask) - mode = fls(hwif->pio_mask) - 1 + XFER_PIO_0; - else - mode = XFER_PIO_4; - } - -/* printk("%s: mode 0x%02x, speed 0x%02x\n", __func__, mode, speed); */ - - return min(speed, mode); -} - -/** - * ide_get_best_pio_mode - get PIO mode from drive - * @drive: drive to consider - * @mode_wanted: preferred mode - * @max_mode: highest allowed mode - * - * This routine returns the recommended PIO settings for a given drive, - * based on the drive->id information and the ide_pio_blacklist[]. - * - * Drive PIO mode is auto-selected if 255 is passed as mode_wanted. - * This is used by most chipset support modules when "auto-tuning". - */ - -u8 ide_get_best_pio_mode(ide_drive_t *drive, u8 mode_wanted, u8 max_mode) -{ - u16 *id = drive->id; - int pio_mode = -1, overridden = 0; - - if (mode_wanted != 255) - return min_t(u8, mode_wanted, max_mode); - - if ((drive->hwif->host_flags & IDE_HFLAG_PIO_NO_BLACKLIST) == 0) - pio_mode = ide_scan_pio_blacklist((char *)&id[ATA_ID_PROD]); - - if (pio_mode != -1) { - printk(KERN_INFO "%s: is on PIO blacklist\n", drive->name); - } else { - pio_mode = id[ATA_ID_OLD_PIO_MODES] >> 8; - if (pio_mode > 2) { /* 2 is maximum allowed tPIO value */ - pio_mode = 2; - overridden = 1; - } - - if (id[ATA_ID_FIELD_VALID] & 2) { /* ATA2? */ - if (ata_id_has_iordy(id)) { - if (id[ATA_ID_PIO_MODES] & 7) { - overridden = 0; - if (id[ATA_ID_PIO_MODES] & 4) - pio_mode = 5; - else if (id[ATA_ID_PIO_MODES] & 2) - pio_mode = 4; - else - pio_mode = 3; - } - } - } - - if (overridden) - printk(KERN_INFO "%s: tPIO > 2, assuming tPIO = 2\n", - drive->name); - } - - if (pio_mode > max_mode) - pio_mode = max_mode; - - return pio_mode; -} -EXPORT_SYMBOL_GPL(ide_get_best_pio_mode); - -/* req_pio == "255" for auto-tune */ -void ide_set_pio(ide_drive_t *drive, u8 req_pio) -{ - ide_hwif_t *hwif = drive->hwif; - const struct ide_port_ops *port_ops = hwif->port_ops; - u8 host_pio, pio; - - if (port_ops == NULL || port_ops->set_pio_mode == NULL || - (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)) - return; - - BUG_ON(hwif->pio_mask == 0x00); - - host_pio = fls(hwif->pio_mask) - 1; - - pio = ide_get_best_pio_mode(drive, req_pio, host_pio); - - /* - * TODO: - * - report device max PIO mode - * - check req_pio != 255 against device max PIO mode - */ - printk(KERN_DEBUG "%s: host max PIO%d wanted PIO%d%s selected PIO%d\n", - drive->name, host_pio, req_pio, - req_pio == 255 ? "(auto-tune)" : "", pio); - - (void)ide_set_pio_mode(drive, XFER_PIO_0 + pio); -} -EXPORT_SYMBOL_GPL(ide_set_pio); - /** * ide_toggle_bounce - handle bounce buffering * @drive: drive to update @@ -188,89 +31,6 @@ void ide_toggle_bounce(ide_drive_t *drive, int on) blk_queue_bounce_limit(drive->queue, addr); } -int ide_set_pio_mode(ide_drive_t *drive, const u8 mode) -{ - ide_hwif_t *hwif = drive->hwif; - const struct ide_port_ops *port_ops = hwif->port_ops; - - if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE) - return 0; - - if (port_ops == NULL || port_ops->set_pio_mode == NULL) - return -1; - - /* - * TODO: temporary hack for some legacy host drivers that didn't - * set transfer mode on the device in ->set_pio_mode method... - */ - if (port_ops->set_dma_mode == NULL) { - port_ops->set_pio_mode(drive, mode - XFER_PIO_0); - return 0; - } - - if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) { - if (ide_config_drive_speed(drive, mode)) - return -1; - port_ops->set_pio_mode(drive, mode - XFER_PIO_0); - return 0; - } else { - port_ops->set_pio_mode(drive, mode - XFER_PIO_0); - return ide_config_drive_speed(drive, mode); - } -} - -int ide_set_dma_mode(ide_drive_t *drive, const u8 mode) -{ - ide_hwif_t *hwif = drive->hwif; - const struct ide_port_ops *port_ops = hwif->port_ops; - - if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE) - return 0; - - if (port_ops == NULL || port_ops->set_dma_mode == NULL) - return -1; - - if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) { - if (ide_config_drive_speed(drive, mode)) - return -1; - port_ops->set_dma_mode(drive, mode); - return 0; - } else { - port_ops->set_dma_mode(drive, mode); - return ide_config_drive_speed(drive, mode); - } -} -EXPORT_SYMBOL_GPL(ide_set_dma_mode); - -/** - * ide_set_xfer_rate - set transfer rate - * @drive: drive to set - * @rate: speed to attempt to set - * - * General helper for setting the speed of an IDE device. This - * function knows about user enforced limits from the configuration - * which ->set_pio_mode/->set_dma_mode does not. - */ - -int ide_set_xfer_rate(ide_drive_t *drive, u8 rate) -{ - ide_hwif_t *hwif = drive->hwif; - const struct ide_port_ops *port_ops = hwif->port_ops; - - if (port_ops == NULL || port_ops->set_dma_mode == NULL || - (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)) - return -1; - - rate = ide_rate_filter(drive, rate); - - BUG_ON(rate < XFER_PIO_0); - - if (rate >= XFER_PIO_0 && rate <= XFER_PIO_5) - return ide_set_pio_mode(drive, rate); - - return ide_set_dma_mode(drive, rate); -} - static void ide_dump_opcode(ide_drive_t *drive) { struct request *rq = drive->hwif->rq; diff --git a/drivers/ide/ide-xfer-mode.c b/drivers/ide/ide-xfer-mode.c new file mode 100644 index 00000000000..6910f6a257e --- /dev/null +++ b/drivers/ide/ide-xfer-mode.c @@ -0,0 +1,246 @@ +#include +#include +#include +#include +#include +#include + +static const char *udma_str[] = + { "UDMA/16", "UDMA/25", "UDMA/33", "UDMA/44", + "UDMA/66", "UDMA/100", "UDMA/133", "UDMA7" }; +static const char *mwdma_str[] = + { "MWDMA0", "MWDMA1", "MWDMA2" }; +static const char *swdma_str[] = + { "SWDMA0", "SWDMA1", "SWDMA2" }; +static const char *pio_str[] = + { "PIO0", "PIO1", "PIO2", "PIO3", "PIO4", "PIO5" }; + +/** + * ide_xfer_verbose - return IDE mode names + * @mode: transfer mode + * + * Returns a constant string giving the name of the mode + * requested. + */ + +const char *ide_xfer_verbose(u8 mode) +{ + const char *s; + u8 i = mode & 0xf; + + if (mode >= XFER_UDMA_0 && mode <= XFER_UDMA_7) + s = udma_str[i]; + else if (mode >= XFER_MW_DMA_0 && mode <= XFER_MW_DMA_2) + s = mwdma_str[i]; + else if (mode >= XFER_SW_DMA_0 && mode <= XFER_SW_DMA_2) + s = swdma_str[i]; + else if (mode >= XFER_PIO_0 && mode <= XFER_PIO_5) + s = pio_str[i & 0x7]; + else if (mode == XFER_PIO_SLOW) + s = "PIO SLOW"; + else + s = "XFER ERROR"; + + return s; +} +EXPORT_SYMBOL(ide_xfer_verbose); + +/** + * ide_get_best_pio_mode - get PIO mode from drive + * @drive: drive to consider + * @mode_wanted: preferred mode + * @max_mode: highest allowed mode + * + * This routine returns the recommended PIO settings for a given drive, + * based on the drive->id information and the ide_pio_blacklist[]. + * + * Drive PIO mode is auto-selected if 255 is passed as mode_wanted. + * This is used by most chipset support modules when "auto-tuning". + */ + +u8 ide_get_best_pio_mode(ide_drive_t *drive, u8 mode_wanted, u8 max_mode) +{ + u16 *id = drive->id; + int pio_mode = -1, overridden = 0; + + if (mode_wanted != 255) + return min_t(u8, mode_wanted, max_mode); + + if ((drive->hwif->host_flags & IDE_HFLAG_PIO_NO_BLACKLIST) == 0) + pio_mode = ide_scan_pio_blacklist((char *)&id[ATA_ID_PROD]); + + if (pio_mode != -1) { + printk(KERN_INFO "%s: is on PIO blacklist\n", drive->name); + } else { + pio_mode = id[ATA_ID_OLD_PIO_MODES] >> 8; + if (pio_mode > 2) { /* 2 is maximum allowed tPIO value */ + pio_mode = 2; + overridden = 1; + } + + if (id[ATA_ID_FIELD_VALID] & 2) { /* ATA2? */ + if (ata_id_has_iordy(id)) { + if (id[ATA_ID_PIO_MODES] & 7) { + overridden = 0; + if (id[ATA_ID_PIO_MODES] & 4) + pio_mode = 5; + else if (id[ATA_ID_PIO_MODES] & 2) + pio_mode = 4; + else + pio_mode = 3; + } + } + } + + if (overridden) + printk(KERN_INFO "%s: tPIO > 2, assuming tPIO = 2\n", + drive->name); + } + + if (pio_mode > max_mode) + pio_mode = max_mode; + + return pio_mode; +} +EXPORT_SYMBOL_GPL(ide_get_best_pio_mode); + +int ide_set_pio_mode(ide_drive_t *drive, const u8 mode) +{ + ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; + + if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE) + return 0; + + if (port_ops == NULL || port_ops->set_pio_mode == NULL) + return -1; + + /* + * TODO: temporary hack for some legacy host drivers that didn't + * set transfer mode on the device in ->set_pio_mode method... + */ + if (port_ops->set_dma_mode == NULL) { + port_ops->set_pio_mode(drive, mode - XFER_PIO_0); + return 0; + } + + if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) { + if (ide_config_drive_speed(drive, mode)) + return -1; + port_ops->set_pio_mode(drive, mode - XFER_PIO_0); + return 0; + } else { + port_ops->set_pio_mode(drive, mode - XFER_PIO_0); + return ide_config_drive_speed(drive, mode); + } +} + +int ide_set_dma_mode(ide_drive_t *drive, const u8 mode) +{ + ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; + + if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE) + return 0; + + if (port_ops == NULL || port_ops->set_dma_mode == NULL) + return -1; + + if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) { + if (ide_config_drive_speed(drive, mode)) + return -1; + port_ops->set_dma_mode(drive, mode); + return 0; + } else { + port_ops->set_dma_mode(drive, mode); + return ide_config_drive_speed(drive, mode); + } +} +EXPORT_SYMBOL_GPL(ide_set_dma_mode); + +/* req_pio == "255" for auto-tune */ +void ide_set_pio(ide_drive_t *drive, u8 req_pio) +{ + ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; + u8 host_pio, pio; + + if (port_ops == NULL || port_ops->set_pio_mode == NULL || + (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)) + return; + + BUG_ON(hwif->pio_mask == 0x00); + + host_pio = fls(hwif->pio_mask) - 1; + + pio = ide_get_best_pio_mode(drive, req_pio, host_pio); + + /* + * TODO: + * - report device max PIO mode + * - check req_pio != 255 against device max PIO mode + */ + printk(KERN_DEBUG "%s: host max PIO%d wanted PIO%d%s selected PIO%d\n", + drive->name, host_pio, req_pio, + req_pio == 255 ? "(auto-tune)" : "", pio); + + (void)ide_set_pio_mode(drive, XFER_PIO_0 + pio); +} +EXPORT_SYMBOL_GPL(ide_set_pio); + +/** + * ide_rate_filter - filter transfer mode + * @drive: IDE device + * @speed: desired speed + * + * Given the available transfer modes this function returns + * the best available speed at or below the speed requested. + * + * TODO: check device PIO capabilities + */ + +static u8 ide_rate_filter(ide_drive_t *drive, u8 speed) +{ + ide_hwif_t *hwif = drive->hwif; + u8 mode = ide_find_dma_mode(drive, speed); + + if (mode == 0) { + if (hwif->pio_mask) + mode = fls(hwif->pio_mask) - 1 + XFER_PIO_0; + else + mode = XFER_PIO_4; + } + +/* printk("%s: mode 0x%02x, speed 0x%02x\n", __func__, mode, speed); */ + + return min(speed, mode); +} + +/** + * ide_set_xfer_rate - set transfer rate + * @drive: drive to set + * @rate: speed to attempt to set + * + * General helper for setting the speed of an IDE device. This + * function knows about user enforced limits from the configuration + * which ->set_pio_mode/->set_dma_mode does not. + */ + +int ide_set_xfer_rate(ide_drive_t *drive, u8 rate) +{ + ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; + + if (port_ops == NULL || port_ops->set_dma_mode == NULL || + (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)) + return -1; + + rate = ide_rate_filter(drive, rate); + + BUG_ON(rate < XFER_PIO_0); + + if (rate >= XFER_PIO_0 && rate <= XFER_PIO_5) + return ide_set_pio_mode(drive, rate); + + return ide_set_dma_mode(drive, rate); +} diff --git a/include/linux/ide.h b/include/linux/ide.h index eca5082c343..323c3710fbf 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1531,9 +1531,7 @@ static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data) hwif->hwif_data = data; } -const char *ide_xfer_verbose(u8 mode); extern void ide_toggle_bounce(ide_drive_t *drive, int on); -extern int ide_set_xfer_rate(ide_drive_t *drive, u8 rate); u64 ide_get_lba_addr(struct ide_taskfile *, int); u8 ide_dump_status(ide_drive_t *, const char *, u8); @@ -1572,14 +1570,18 @@ void ide_timing_merge(struct ide_timing *, struct ide_timing *, struct ide_timing *, unsigned int); int ide_timing_compute(ide_drive_t *, u8, struct ide_timing *, int, int); +#ifdef CONFIG_IDE_XFER_MODE int ide_scan_pio_blacklist(char *); - +const char *ide_xfer_verbose(u8); u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8); - int ide_set_pio_mode(ide_drive_t *, u8); int ide_set_dma_mode(ide_drive_t *, u8); - void ide_set_pio(ide_drive_t *, u8); +int ide_set_xfer_rate(ide_drive_t *, u8); +#else +static inline void ide_set_pio(ide_drive_t *drive, u8 pio) { ; } +static inline int ide_set_xfer_rate(ide_drive_t *drive, u8 rate) { return -1; } +#endif static inline void ide_set_max_pio(ide_drive_t *drive) { -- cgit v1.2.3-70-g09d2 From 1574cf6cb4800525be769ee6023c567113fa2d18 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 24 Mar 2009 23:22:46 +0100 Subject: ide: move standard I/O code to ide-io-std.c Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Makefile | 3 +- drivers/ide/ide-io-std.c | 316 +++++++++++++++++++++++++++++++++++++++++++++++ drivers/ide/ide-iops.c | 313 ---------------------------------------------- 3 files changed, 318 insertions(+), 314 deletions(-) create mode 100644 drivers/ide/ide-io-std.c (limited to 'drivers/ide/Makefile') diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index d0976e6ee09..cbb1aea2aea 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -5,7 +5,8 @@ EXTRA_CFLAGS += -Idrivers/ide ide-core-y += ide.o ide-ioctls.o ide-io.o ide-iops.o ide-lib.o ide-probe.o \ - ide-taskfile.o ide-pm.o ide-park.o ide-sysfs.o ide-devsets.o + ide-taskfile.o ide-pm.o ide-park.o ide-sysfs.o ide-devsets.o \ + ide-io-std.o # core IDE code ide-core-$(CONFIG_IDE_XFER_MODE) += ide-pio-blacklist.o ide-xfer-mode.o diff --git a/drivers/ide/ide-io-std.c b/drivers/ide/ide-io-std.c new file mode 100644 index 00000000000..45b43dd49cd --- /dev/null +++ b/drivers/ide/ide-io-std.c @@ -0,0 +1,316 @@ + +#include +#include + +/* + * Conventional PIO operations for ATA devices + */ + +static u8 ide_inb(unsigned long port) +{ + return (u8) inb(port); +} + +static void ide_outb(u8 val, unsigned long port) +{ + outb(val, port); +} + +/* + * MMIO operations, typically used for SATA controllers + */ + +static u8 ide_mm_inb(unsigned long port) +{ + return (u8) readb((void __iomem *) port); +} + +static void ide_mm_outb(u8 value, unsigned long port) +{ + writeb(value, (void __iomem *) port); +} + +void ide_exec_command(ide_hwif_t *hwif, u8 cmd) +{ + if (hwif->host_flags & IDE_HFLAG_MMIO) + writeb(cmd, (void __iomem *)hwif->io_ports.command_addr); + else + outb(cmd, hwif->io_ports.command_addr); +} +EXPORT_SYMBOL_GPL(ide_exec_command); + +u8 ide_read_status(ide_hwif_t *hwif) +{ + if (hwif->host_flags & IDE_HFLAG_MMIO) + return readb((void __iomem *)hwif->io_ports.status_addr); + else + return inb(hwif->io_ports.status_addr); +} +EXPORT_SYMBOL_GPL(ide_read_status); + +u8 ide_read_altstatus(ide_hwif_t *hwif) +{ + if (hwif->host_flags & IDE_HFLAG_MMIO) + return readb((void __iomem *)hwif->io_ports.ctl_addr); + else + return inb(hwif->io_ports.ctl_addr); +} +EXPORT_SYMBOL_GPL(ide_read_altstatus); + +void ide_set_irq(ide_hwif_t *hwif, int on) +{ + u8 ctl = ATA_DEVCTL_OBS; + + if (on == 4) { /* hack for SRST */ + ctl |= 4; + on &= ~4; + } + + ctl |= on ? 0 : 2; + + if (hwif->host_flags & IDE_HFLAG_MMIO) + writeb(ctl, (void __iomem *)hwif->io_ports.ctl_addr); + else + outb(ctl, hwif->io_ports.ctl_addr); +} +EXPORT_SYMBOL_GPL(ide_set_irq); + +void ide_tf_load(ide_drive_t *drive, ide_task_t *task) +{ + ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; + struct ide_taskfile *tf = &task->tf; + void (*tf_outb)(u8 addr, unsigned long port); + u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; + u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; + + if (mmio) + tf_outb = ide_mm_outb; + else + tf_outb = ide_outb; + + if (task->tf_flags & IDE_TFLAG_FLAGGED) + HIHI = 0xFF; + + if (task->tf_flags & IDE_TFLAG_OUT_DATA) { + u16 data = (tf->hob_data << 8) | tf->data; + + if (mmio) + writew(data, (void __iomem *)io_ports->data_addr); + else + outw(data, io_ports->data_addr); + } + + if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) + tf_outb(tf->hob_feature, io_ports->feature_addr); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) + tf_outb(tf->hob_nsect, io_ports->nsect_addr); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) + tf_outb(tf->hob_lbal, io_ports->lbal_addr); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) + tf_outb(tf->hob_lbam, io_ports->lbam_addr); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) + tf_outb(tf->hob_lbah, io_ports->lbah_addr); + + if (task->tf_flags & IDE_TFLAG_OUT_FEATURE) + tf_outb(tf->feature, io_ports->feature_addr); + if (task->tf_flags & IDE_TFLAG_OUT_NSECT) + tf_outb(tf->nsect, io_ports->nsect_addr); + if (task->tf_flags & IDE_TFLAG_OUT_LBAL) + tf_outb(tf->lbal, io_ports->lbal_addr); + if (task->tf_flags & IDE_TFLAG_OUT_LBAM) + tf_outb(tf->lbam, io_ports->lbam_addr); + if (task->tf_flags & IDE_TFLAG_OUT_LBAH) + tf_outb(tf->lbah, io_ports->lbah_addr); + + if (task->tf_flags & IDE_TFLAG_OUT_DEVICE) + tf_outb((tf->device & HIHI) | drive->select, + io_ports->device_addr); +} +EXPORT_SYMBOL_GPL(ide_tf_load); + +void ide_tf_read(ide_drive_t *drive, ide_task_t *task) +{ + ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; + struct ide_taskfile *tf = &task->tf; + void (*tf_outb)(u8 addr, unsigned long port); + u8 (*tf_inb)(unsigned long port); + u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; + + if (mmio) { + tf_outb = ide_mm_outb; + tf_inb = ide_mm_inb; + } else { + tf_outb = ide_outb; + tf_inb = ide_inb; + } + + if (task->tf_flags & IDE_TFLAG_IN_DATA) { + u16 data; + + if (mmio) + data = readw((void __iomem *)io_ports->data_addr); + else + data = inw(io_ports->data_addr); + + tf->data = data & 0xff; + tf->hob_data = (data >> 8) & 0xff; + } + + /* be sure we're looking at the low order bits */ + tf_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr); + + if (task->tf_flags & IDE_TFLAG_IN_FEATURE) + tf->feature = tf_inb(io_ports->feature_addr); + if (task->tf_flags & IDE_TFLAG_IN_NSECT) + tf->nsect = tf_inb(io_ports->nsect_addr); + if (task->tf_flags & IDE_TFLAG_IN_LBAL) + tf->lbal = tf_inb(io_ports->lbal_addr); + if (task->tf_flags & IDE_TFLAG_IN_LBAM) + tf->lbam = tf_inb(io_ports->lbam_addr); + if (task->tf_flags & IDE_TFLAG_IN_LBAH) + tf->lbah = tf_inb(io_ports->lbah_addr); + if (task->tf_flags & IDE_TFLAG_IN_DEVICE) + tf->device = tf_inb(io_ports->device_addr); + + if (task->tf_flags & IDE_TFLAG_LBA48) { + tf_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr); + + if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) + tf->hob_feature = tf_inb(io_ports->feature_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT) + tf->hob_nsect = tf_inb(io_ports->nsect_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL) + tf->hob_lbal = tf_inb(io_ports->lbal_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM) + tf->hob_lbam = tf_inb(io_ports->lbam_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH) + tf->hob_lbah = tf_inb(io_ports->lbah_addr); + } +} +EXPORT_SYMBOL_GPL(ide_tf_read); + +/* + * Some localbus EIDE interfaces require a special access sequence + * when using 32-bit I/O instructions to transfer data. We call this + * the "vlb_sync" sequence, which consists of three successive reads + * of the sector count register location, with interrupts disabled + * to ensure that the reads all happen together. + */ +static void ata_vlb_sync(unsigned long port) +{ + (void)inb(port); + (void)inb(port); + (void)inb(port); +} + +/* + * This is used for most PIO data transfers *from* the IDE interface + * + * These routines will round up any request for an odd number of bytes, + * so if an odd len is specified, be sure that there's at least one + * extra byte allocated for the buffer. + */ +void ide_input_data(ide_drive_t *drive, struct request *rq, void *buf, + unsigned int len) +{ + ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; + unsigned long data_addr = io_ports->data_addr; + u8 io_32bit = drive->io_32bit; + u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; + + len++; + + if (io_32bit) { + unsigned long uninitialized_var(flags); + + if ((io_32bit & 2) && !mmio) { + local_irq_save(flags); + ata_vlb_sync(io_ports->nsect_addr); + } + + if (mmio) + __ide_mm_insl((void __iomem *)data_addr, buf, len / 4); + else + insl(data_addr, buf, len / 4); + + if ((io_32bit & 2) && !mmio) + local_irq_restore(flags); + + if ((len & 3) >= 2) { + if (mmio) + __ide_mm_insw((void __iomem *)data_addr, + (u8 *)buf + (len & ~3), 1); + else + insw(data_addr, (u8 *)buf + (len & ~3), 1); + } + } else { + if (mmio) + __ide_mm_insw((void __iomem *)data_addr, buf, len / 2); + else + insw(data_addr, buf, len / 2); + } +} +EXPORT_SYMBOL_GPL(ide_input_data); + +/* + * This is used for most PIO data transfers *to* the IDE interface + */ +void ide_output_data(ide_drive_t *drive, struct request *rq, void *buf, + unsigned int len) +{ + ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; + unsigned long data_addr = io_ports->data_addr; + u8 io_32bit = drive->io_32bit; + u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; + + len++; + + if (io_32bit) { + unsigned long uninitialized_var(flags); + + if ((io_32bit & 2) && !mmio) { + local_irq_save(flags); + ata_vlb_sync(io_ports->nsect_addr); + } + + if (mmio) + __ide_mm_outsl((void __iomem *)data_addr, buf, len / 4); + else + outsl(data_addr, buf, len / 4); + + if ((io_32bit & 2) && !mmio) + local_irq_restore(flags); + + if ((len & 3) >= 2) { + if (mmio) + __ide_mm_outsw((void __iomem *)data_addr, + (u8 *)buf + (len & ~3), 1); + else + outsw(data_addr, (u8 *)buf + (len & ~3), 1); + } + } else { + if (mmio) + __ide_mm_outsw((void __iomem *)data_addr, buf, len / 2); + else + outsw(data_addr, buf, len / 2); + } +} +EXPORT_SYMBOL_GPL(ide_output_data); + +const struct ide_tp_ops default_tp_ops = { + .exec_command = ide_exec_command, + .read_status = ide_read_status, + .read_altstatus = ide_read_altstatus, + + .set_irq = ide_set_irq, + + .tf_load = ide_tf_load, + .tf_read = ide_tf_read, + + .input_data = ide_input_data, + .output_data = ide_output_data, +}; diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index d24add69212..91a49b543bd 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -27,34 +27,6 @@ #include #include -/* - * Conventional PIO operations for ATA devices - */ - -static u8 ide_inb (unsigned long port) -{ - return (u8) inb(port); -} - -static void ide_outb (u8 val, unsigned long port) -{ - outb(val, port); -} - -/* - * MMIO operations, typically used for SATA controllers - */ - -static u8 ide_mm_inb (unsigned long port) -{ - return (u8) readb((void __iomem *) port); -} - -static void ide_mm_outb (u8 value, unsigned long port) -{ - writeb(value, (void __iomem *) port); -} - void SELECT_DRIVE (ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; @@ -78,277 +50,6 @@ void SELECT_MASK(ide_drive_t *drive, int mask) port_ops->maskproc(drive, mask); } -void ide_exec_command(ide_hwif_t *hwif, u8 cmd) -{ - if (hwif->host_flags & IDE_HFLAG_MMIO) - writeb(cmd, (void __iomem *)hwif->io_ports.command_addr); - else - outb(cmd, hwif->io_ports.command_addr); -} -EXPORT_SYMBOL_GPL(ide_exec_command); - -u8 ide_read_status(ide_hwif_t *hwif) -{ - if (hwif->host_flags & IDE_HFLAG_MMIO) - return readb((void __iomem *)hwif->io_ports.status_addr); - else - return inb(hwif->io_ports.status_addr); -} -EXPORT_SYMBOL_GPL(ide_read_status); - -u8 ide_read_altstatus(ide_hwif_t *hwif) -{ - if (hwif->host_flags & IDE_HFLAG_MMIO) - return readb((void __iomem *)hwif->io_ports.ctl_addr); - else - return inb(hwif->io_ports.ctl_addr); -} -EXPORT_SYMBOL_GPL(ide_read_altstatus); - -void ide_set_irq(ide_hwif_t *hwif, int on) -{ - u8 ctl = ATA_DEVCTL_OBS; - - if (on == 4) { /* hack for SRST */ - ctl |= 4; - on &= ~4; - } - - ctl |= on ? 0 : 2; - - if (hwif->host_flags & IDE_HFLAG_MMIO) - writeb(ctl, (void __iomem *)hwif->io_ports.ctl_addr); - else - outb(ctl, hwif->io_ports.ctl_addr); -} -EXPORT_SYMBOL_GPL(ide_set_irq); - -void ide_tf_load(ide_drive_t *drive, ide_task_t *task) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - struct ide_taskfile *tf = &task->tf; - void (*tf_outb)(u8 addr, unsigned long port); - u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; - u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; - - if (mmio) - tf_outb = ide_mm_outb; - else - tf_outb = ide_outb; - - if (task->tf_flags & IDE_TFLAG_FLAGGED) - HIHI = 0xFF; - - if (task->tf_flags & IDE_TFLAG_OUT_DATA) { - u16 data = (tf->hob_data << 8) | tf->data; - - if (mmio) - writew(data, (void __iomem *)io_ports->data_addr); - else - outw(data, io_ports->data_addr); - } - - if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) - tf_outb(tf->hob_feature, io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) - tf_outb(tf->hob_nsect, io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) - tf_outb(tf->hob_lbal, io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) - tf_outb(tf->hob_lbam, io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) - tf_outb(tf->hob_lbah, io_ports->lbah_addr); - - if (task->tf_flags & IDE_TFLAG_OUT_FEATURE) - tf_outb(tf->feature, io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_OUT_NSECT) - tf_outb(tf->nsect, io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_OUT_LBAL) - tf_outb(tf->lbal, io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_OUT_LBAM) - tf_outb(tf->lbam, io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_OUT_LBAH) - tf_outb(tf->lbah, io_ports->lbah_addr); - - if (task->tf_flags & IDE_TFLAG_OUT_DEVICE) - tf_outb((tf->device & HIHI) | drive->select, - io_ports->device_addr); -} -EXPORT_SYMBOL_GPL(ide_tf_load); - -void ide_tf_read(ide_drive_t *drive, ide_task_t *task) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - struct ide_taskfile *tf = &task->tf; - void (*tf_outb)(u8 addr, unsigned long port); - u8 (*tf_inb)(unsigned long port); - u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; - - if (mmio) { - tf_outb = ide_mm_outb; - tf_inb = ide_mm_inb; - } else { - tf_outb = ide_outb; - tf_inb = ide_inb; - } - - if (task->tf_flags & IDE_TFLAG_IN_DATA) { - u16 data; - - if (mmio) - data = readw((void __iomem *)io_ports->data_addr); - else - data = inw(io_ports->data_addr); - - tf->data = data & 0xff; - tf->hob_data = (data >> 8) & 0xff; - } - - /* be sure we're looking at the low order bits */ - tf_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr); - - if (task->tf_flags & IDE_TFLAG_IN_FEATURE) - tf->feature = tf_inb(io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_IN_NSECT) - tf->nsect = tf_inb(io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAL) - tf->lbal = tf_inb(io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAM) - tf->lbam = tf_inb(io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAH) - tf->lbah = tf_inb(io_ports->lbah_addr); - if (task->tf_flags & IDE_TFLAG_IN_DEVICE) - tf->device = tf_inb(io_ports->device_addr); - - if (task->tf_flags & IDE_TFLAG_LBA48) { - tf_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr); - - if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) - tf->hob_feature = tf_inb(io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT) - tf->hob_nsect = tf_inb(io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL) - tf->hob_lbal = tf_inb(io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM) - tf->hob_lbam = tf_inb(io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH) - tf->hob_lbah = tf_inb(io_ports->lbah_addr); - } -} -EXPORT_SYMBOL_GPL(ide_tf_read); - -/* - * Some localbus EIDE interfaces require a special access sequence - * when using 32-bit I/O instructions to transfer data. We call this - * the "vlb_sync" sequence, which consists of three successive reads - * of the sector count register location, with interrupts disabled - * to ensure that the reads all happen together. - */ -static void ata_vlb_sync(unsigned long port) -{ - (void)inb(port); - (void)inb(port); - (void)inb(port); -} - -/* - * This is used for most PIO data transfers *from* the IDE interface - * - * These routines will round up any request for an odd number of bytes, - * so if an odd len is specified, be sure that there's at least one - * extra byte allocated for the buffer. - */ -void ide_input_data(ide_drive_t *drive, struct request *rq, void *buf, - unsigned int len) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - unsigned long data_addr = io_ports->data_addr; - u8 io_32bit = drive->io_32bit; - u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; - - len++; - - if (io_32bit) { - unsigned long uninitialized_var(flags); - - if ((io_32bit & 2) && !mmio) { - local_irq_save(flags); - ata_vlb_sync(io_ports->nsect_addr); - } - - if (mmio) - __ide_mm_insl((void __iomem *)data_addr, buf, len / 4); - else - insl(data_addr, buf, len / 4); - - if ((io_32bit & 2) && !mmio) - local_irq_restore(flags); - - if ((len & 3) >= 2) { - if (mmio) - __ide_mm_insw((void __iomem *)data_addr, - (u8 *)buf + (len & ~3), 1); - else - insw(data_addr, (u8 *)buf + (len & ~3), 1); - } - } else { - if (mmio) - __ide_mm_insw((void __iomem *)data_addr, buf, len / 2); - else - insw(data_addr, buf, len / 2); - } -} -EXPORT_SYMBOL_GPL(ide_input_data); - -/* - * This is used for most PIO data transfers *to* the IDE interface - */ -void ide_output_data(ide_drive_t *drive, struct request *rq, void *buf, - unsigned int len) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - unsigned long data_addr = io_ports->data_addr; - u8 io_32bit = drive->io_32bit; - u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; - - len++; - - if (io_32bit) { - unsigned long uninitialized_var(flags); - - if ((io_32bit & 2) && !mmio) { - local_irq_save(flags); - ata_vlb_sync(io_ports->nsect_addr); - } - - if (mmio) - __ide_mm_outsl((void __iomem *)data_addr, buf, len / 4); - else - outsl(data_addr, buf, len / 4); - - if ((io_32bit & 2) && !mmio) - local_irq_restore(flags); - - if ((len & 3) >= 2) { - if (mmio) - __ide_mm_outsw((void __iomem *)data_addr, - (u8 *)buf + (len & ~3), 1); - else - outsw(data_addr, (u8 *)buf + (len & ~3), 1); - } - } else { - if (mmio) - __ide_mm_outsw((void __iomem *)data_addr, buf, len / 2); - else - outsw(data_addr, buf, len / 2); - } -} -EXPORT_SYMBOL_GPL(ide_output_data); - u8 ide_read_error(ide_drive_t *drive) { ide_task_t task; @@ -362,20 +63,6 @@ u8 ide_read_error(ide_drive_t *drive) } EXPORT_SYMBOL_GPL(ide_read_error); -const struct ide_tp_ops default_tp_ops = { - .exec_command = ide_exec_command, - .read_status = ide_read_status, - .read_altstatus = ide_read_altstatus, - - .set_irq = ide_set_irq, - - .tf_load = ide_tf_load, - .tf_read = ide_tf_read, - - .input_data = ide_input_data, - .output_data = ide_output_data, -}; - void ide_fix_driveid(u16 *id) { #ifndef __LITTLE_ENDIAN -- cgit v1.2.3-70-g09d2 From 327fa1c29466b8fe471a91fc11e9c6171163c81a Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 24 Mar 2009 23:22:47 +0100 Subject: ide: move error handling code to ide-eh.c (v2) Do some CodingStyle fixups in while at it. v2: Add missing include (reported by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Makefile | 2 +- drivers/ide/ide-eh.c | 428 +++++++++++++++++++++++++++++++++++++++++++++++++ drivers/ide/ide-io.c | 129 +-------------- drivers/ide/ide-iops.c | 299 +--------------------------------- include/linux/ide.h | 13 +- 5 files changed, 440 insertions(+), 431 deletions(-) create mode 100644 drivers/ide/ide-eh.c (limited to 'drivers/ide/Makefile') diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index cbb1aea2aea..9b4bbe1cdc1 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -6,7 +6,7 @@ EXTRA_CFLAGS += -Idrivers/ide ide-core-y += ide.o ide-ioctls.o ide-io.o ide-iops.o ide-lib.o ide-probe.o \ ide-taskfile.o ide-pm.o ide-park.o ide-sysfs.o ide-devsets.o \ - ide-io-std.o + ide-io-std.o ide-eh.o # core IDE code ide-core-$(CONFIG_IDE_XFER_MODE) += ide-pio-blacklist.o ide-xfer-mode.o diff --git a/drivers/ide/ide-eh.c b/drivers/ide/ide-eh.c new file mode 100644 index 00000000000..1231b5e486f --- /dev/null +++ b/drivers/ide/ide-eh.c @@ -0,0 +1,428 @@ + +#include +#include +#include + +static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, + u8 stat, u8 err) +{ + ide_hwif_t *hwif = drive->hwif; + + if ((stat & ATA_BUSY) || + ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) { + /* other bits are useless when BUSY */ + rq->errors |= ERROR_RESET; + } else if (stat & ATA_ERR) { + /* err has different meaning on cdrom and tape */ + if (err == ATA_ABORTED) { + if ((drive->dev_flags & IDE_DFLAG_LBA) && + /* some newer drives don't support ATA_CMD_INIT_DEV_PARAMS */ + hwif->tp_ops->read_status(hwif) == ATA_CMD_INIT_DEV_PARAMS) + return ide_stopped; + } else if ((err & BAD_CRC) == BAD_CRC) { + /* UDMA crc error, just retry the operation */ + drive->crc_count++; + } else if (err & (ATA_BBK | ATA_UNC)) { + /* retries won't help these */ + rq->errors = ERROR_MAX; + } else if (err & ATA_TRK0NF) { + /* help it find track zero */ + rq->errors |= ERROR_RECAL; + } + } + + if ((stat & ATA_DRQ) && rq_data_dir(rq) == READ && + (hwif->host_flags & IDE_HFLAG_ERROR_STOPS_FIFO) == 0) { + int nsect = drive->mult_count ? drive->mult_count : 1; + + ide_pad_transfer(drive, READ, nsect * SECTOR_SIZE); + } + + if (rq->errors >= ERROR_MAX || blk_noretry_request(rq)) { + ide_kill_rq(drive, rq); + return ide_stopped; + } + + if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ)) + rq->errors |= ERROR_RESET; + + if ((rq->errors & ERROR_RESET) == ERROR_RESET) { + ++rq->errors; + return ide_do_reset(drive); + } + + if ((rq->errors & ERROR_RECAL) == ERROR_RECAL) + drive->special.b.recalibrate = 1; + + ++rq->errors; + + return ide_stopped; +} + +static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq, + u8 stat, u8 err) +{ + ide_hwif_t *hwif = drive->hwif; + + if ((stat & ATA_BUSY) || + ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) { + /* other bits are useless when BUSY */ + rq->errors |= ERROR_RESET; + } else { + /* add decoding error stuff */ + } + + if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ)) + /* force an abort */ + hwif->tp_ops->exec_command(hwif, ATA_CMD_IDLEIMMEDIATE); + + if (rq->errors >= ERROR_MAX) { + ide_kill_rq(drive, rq); + } else { + if ((rq->errors & ERROR_RESET) == ERROR_RESET) { + ++rq->errors; + return ide_do_reset(drive); + } + ++rq->errors; + } + + return ide_stopped; +} + +static ide_startstop_t __ide_error(ide_drive_t *drive, struct request *rq, + u8 stat, u8 err) +{ + if (drive->media == ide_disk) + return ide_ata_error(drive, rq, stat, err); + return ide_atapi_error(drive, rq, stat, err); +} + +/** + * ide_error - handle an error on the IDE + * @drive: drive the error occurred on + * @msg: message to report + * @stat: status bits + * + * ide_error() takes action based on the error returned by the drive. + * For normal I/O that may well include retries. We deal with + * both new-style (taskfile) and old style command handling here. + * In the case of taskfile command handling there is work left to + * do + */ + +ide_startstop_t ide_error(ide_drive_t *drive, const char *msg, u8 stat) +{ + struct request *rq; + u8 err; + + err = ide_dump_status(drive, msg, stat); + + rq = drive->hwif->rq; + if (rq == NULL) + return ide_stopped; + + /* retry only "normal" I/O: */ + if (!blk_fs_request(rq)) { + rq->errors = 1; + ide_end_drive_cmd(drive, stat, err); + return ide_stopped; + } + + return __ide_error(drive, rq, stat, err); +} +EXPORT_SYMBOL_GPL(ide_error); + +static inline void ide_complete_drive_reset(ide_drive_t *drive, int err) +{ + struct request *rq = drive->hwif->rq; + + if (rq && blk_special_request(rq) && rq->cmd[0] == REQ_DRIVE_RESET) + ide_end_request(drive, err ? err : 1, 0); +} + +/* needed below */ +static ide_startstop_t do_reset1(ide_drive_t *, int); + +/* + * atapi_reset_pollfunc() gets invoked to poll the interface for completion + * every 50ms during an atapi drive reset operation. If the drive has not yet + * responded, and we have not yet hit our maximum waiting time, then the timer + * is restarted for another 50ms. + */ +static ide_startstop_t atapi_reset_pollfunc(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + u8 stat; + + SELECT_DRIVE(drive); + udelay(10); + stat = hwif->tp_ops->read_status(hwif); + + if (OK_STAT(stat, 0, ATA_BUSY)) + printk(KERN_INFO "%s: ATAPI reset complete\n", drive->name); + else { + if (time_before(jiffies, hwif->poll_timeout)) { + ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20, + NULL); + /* continue polling */ + return ide_started; + } + /* end of polling */ + hwif->polling = 0; + printk(KERN_ERR "%s: ATAPI reset timed-out, status=0x%02x\n", + drive->name, stat); + /* do it the old fashioned way */ + return do_reset1(drive, 1); + } + /* done polling */ + hwif->polling = 0; + ide_complete_drive_reset(drive, 0); + return ide_stopped; +} + +static void ide_reset_report_error(ide_hwif_t *hwif, u8 err) +{ + static const char *err_master_vals[] = + { NULL, "passed", "formatter device error", + "sector buffer error", "ECC circuitry error", + "controlling MPU error" }; + + u8 err_master = err & 0x7f; + + printk(KERN_ERR "%s: reset: master: ", hwif->name); + if (err_master && err_master < 6) + printk(KERN_CONT "%s", err_master_vals[err_master]); + else + printk(KERN_CONT "error (0x%02x?)", err); + if (err & 0x80) + printk(KERN_CONT "; slave: failed"); + printk(KERN_CONT "\n"); +} + +/* + * reset_pollfunc() gets invoked to poll the interface for completion every 50ms + * during an ide reset operation. If the drives have not yet responded, + * and we have not yet hit our maximum waiting time, then the timer is restarted + * for another 50ms. + */ +static ide_startstop_t reset_pollfunc(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; + u8 tmp; + int err = 0; + + if (port_ops && port_ops->reset_poll) { + err = port_ops->reset_poll(drive); + if (err) { + printk(KERN_ERR "%s: host reset_poll failure for %s.\n", + hwif->name, drive->name); + goto out; + } + } + + tmp = hwif->tp_ops->read_status(hwif); + + if (!OK_STAT(tmp, 0, ATA_BUSY)) { + if (time_before(jiffies, hwif->poll_timeout)) { + ide_set_handler(drive, &reset_pollfunc, HZ/20, NULL); + /* continue polling */ + return ide_started; + } + printk(KERN_ERR "%s: reset timed-out, status=0x%02x\n", + hwif->name, tmp); + drive->failures++; + err = -EIO; + } else { + tmp = ide_read_error(drive); + + if (tmp == 1) { + printk(KERN_INFO "%s: reset: success\n", hwif->name); + drive->failures = 0; + } else { + ide_reset_report_error(hwif, tmp); + drive->failures++; + err = -EIO; + } + } +out: + hwif->polling = 0; /* done polling */ + ide_complete_drive_reset(drive, err); + return ide_stopped; +} + +static void ide_disk_pre_reset(ide_drive_t *drive) +{ + int legacy = (drive->id[ATA_ID_CFS_ENABLE_2] & 0x0400) ? 0 : 1; + + drive->special.all = 0; + drive->special.b.set_geometry = legacy; + drive->special.b.recalibrate = legacy; + + drive->mult_count = 0; + drive->dev_flags &= ~IDE_DFLAG_PARKED; + + if ((drive->dev_flags & IDE_DFLAG_KEEP_SETTINGS) == 0 && + (drive->dev_flags & IDE_DFLAG_USING_DMA) == 0) + drive->mult_req = 0; + + if (drive->mult_req != drive->mult_count) + drive->special.b.set_multmode = 1; +} + +static void pre_reset(ide_drive_t *drive) +{ + const struct ide_port_ops *port_ops = drive->hwif->port_ops; + + if (drive->media == ide_disk) + ide_disk_pre_reset(drive); + else + drive->dev_flags |= IDE_DFLAG_POST_RESET; + + if (drive->dev_flags & IDE_DFLAG_USING_DMA) { + if (drive->crc_count) + ide_check_dma_crc(drive); + else + ide_dma_off(drive); + } + + if ((drive->dev_flags & IDE_DFLAG_KEEP_SETTINGS) == 0) { + if ((drive->dev_flags & IDE_DFLAG_USING_DMA) == 0) { + drive->dev_flags &= ~IDE_DFLAG_UNMASK; + drive->io_32bit = 0; + } + return; + } + + if (port_ops && port_ops->pre_reset) + port_ops->pre_reset(drive); + + if (drive->current_speed != 0xff) + drive->desired_speed = drive->current_speed; + drive->current_speed = 0xff; +} + +/* + * do_reset1() attempts to recover a confused drive by resetting it. + * Unfortunately, resetting a disk drive actually resets all devices on + * the same interface, so it can really be thought of as resetting the + * interface rather than resetting the drive. + * + * ATAPI devices have their own reset mechanism which allows them to be + * individually reset without clobbering other devices on the same interface. + * + * Unfortunately, the IDE interface does not generate an interrupt to let + * us know when the reset operation has finished, so we must poll for this. + * Equally poor, though, is the fact that this may a very long time to complete, + * (up to 30 seconds worstcase). So, instead of busy-waiting here for it, + * we set a timer to poll at 50ms intervals. + */ +static ide_startstop_t do_reset1(ide_drive_t *drive, int do_not_try_atapi) +{ + ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; + const struct ide_tp_ops *tp_ops = hwif->tp_ops; + const struct ide_port_ops *port_ops; + ide_drive_t *tdrive; + unsigned long flags, timeout; + int i; + DEFINE_WAIT(wait); + + spin_lock_irqsave(&hwif->lock, flags); + + /* We must not reset with running handlers */ + BUG_ON(hwif->handler != NULL); + + /* For an ATAPI device, first try an ATAPI SRST. */ + if (drive->media != ide_disk && !do_not_try_atapi) { + pre_reset(drive); + SELECT_DRIVE(drive); + udelay(20); + tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET); + ndelay(400); + hwif->poll_timeout = jiffies + WAIT_WORSTCASE; + hwif->polling = 1; + __ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20, NULL); + spin_unlock_irqrestore(&hwif->lock, flags); + return ide_started; + } + + /* We must not disturb devices in the IDE_DFLAG_PARKED state. */ + do { + unsigned long now; + + prepare_to_wait(&ide_park_wq, &wait, TASK_UNINTERRUPTIBLE); + timeout = jiffies; + ide_port_for_each_present_dev(i, tdrive, hwif) { + if ((tdrive->dev_flags & IDE_DFLAG_PARKED) && + time_after(tdrive->sleep, timeout)) + timeout = tdrive->sleep; + } + + now = jiffies; + if (time_before_eq(timeout, now)) + break; + + spin_unlock_irqrestore(&hwif->lock, flags); + timeout = schedule_timeout_uninterruptible(timeout - now); + spin_lock_irqsave(&hwif->lock, flags); + } while (timeout); + finish_wait(&ide_park_wq, &wait); + + /* + * First, reset any device state data we were maintaining + * for any of the drives on this interface. + */ + ide_port_for_each_dev(i, tdrive, hwif) + pre_reset(tdrive); + + if (io_ports->ctl_addr == 0) { + spin_unlock_irqrestore(&hwif->lock, flags); + ide_complete_drive_reset(drive, -ENXIO); + return ide_stopped; + } + + /* + * Note that we also set nIEN while resetting the device, + * to mask unwanted interrupts from the interface during the reset. + * However, due to the design of PC hardware, this will cause an + * immediate interrupt due to the edge transition it produces. + * This single interrupt gives us a "fast poll" for drives that + * recover from reset very quickly, saving us the first 50ms wait time. + * + * TODO: add ->softreset method and stop abusing ->set_irq + */ + /* set SRST and nIEN */ + tp_ops->set_irq(hwif, 4); + /* more than enough time */ + udelay(10); + /* clear SRST, leave nIEN (unless device is on the quirk list) */ + tp_ops->set_irq(hwif, drive->quirk_list == 2); + /* more than enough time */ + udelay(10); + hwif->poll_timeout = jiffies + WAIT_WORSTCASE; + hwif->polling = 1; + __ide_set_handler(drive, &reset_pollfunc, HZ/20, NULL); + + /* + * Some weird controller like resetting themselves to a strange + * state when the disks are reset this way. At least, the Winbond + * 553 documentation says that + */ + port_ops = hwif->port_ops; + if (port_ops && port_ops->resetproc) + port_ops->resetproc(drive); + + spin_unlock_irqrestore(&hwif->lock, flags); + return ide_started; +} + +/* + * ide_do_reset() is the entry point to the drive/interface reset code. + */ + +ide_startstop_t ide_do_reset(ide_drive_t *drive) +{ + return do_reset1(drive, 0); +} +EXPORT_SYMBOL(ide_do_reset); diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 74d1a3e6825..2e92497b58a 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -196,7 +196,7 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err) } EXPORT_SYMBOL(ide_end_drive_cmd); -static void ide_kill_rq(ide_drive_t *drive, struct request *rq) +void ide_kill_rq(ide_drive_t *drive, struct request *rq) { if (rq->rq_disk) { struct ide_driver *drv; @@ -207,133 +207,6 @@ static void ide_kill_rq(ide_drive_t *drive, struct request *rq) ide_end_request(drive, 0, 0); } -static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err) -{ - ide_hwif_t *hwif = drive->hwif; - - if ((stat & ATA_BUSY) || - ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) { - /* other bits are useless when BUSY */ - rq->errors |= ERROR_RESET; - } else if (stat & ATA_ERR) { - /* err has different meaning on cdrom and tape */ - if (err == ATA_ABORTED) { - if ((drive->dev_flags & IDE_DFLAG_LBA) && - /* some newer drives don't support ATA_CMD_INIT_DEV_PARAMS */ - hwif->tp_ops->read_status(hwif) == ATA_CMD_INIT_DEV_PARAMS) - return ide_stopped; - } else if ((err & BAD_CRC) == BAD_CRC) { - /* UDMA crc error, just retry the operation */ - drive->crc_count++; - } else if (err & (ATA_BBK | ATA_UNC)) { - /* retries won't help these */ - rq->errors = ERROR_MAX; - } else if (err & ATA_TRK0NF) { - /* help it find track zero */ - rq->errors |= ERROR_RECAL; - } - } - - if ((stat & ATA_DRQ) && rq_data_dir(rq) == READ && - (hwif->host_flags & IDE_HFLAG_ERROR_STOPS_FIFO) == 0) { - int nsect = drive->mult_count ? drive->mult_count : 1; - - ide_pad_transfer(drive, READ, nsect * SECTOR_SIZE); - } - - if (rq->errors >= ERROR_MAX || blk_noretry_request(rq)) { - ide_kill_rq(drive, rq); - return ide_stopped; - } - - if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ)) - rq->errors |= ERROR_RESET; - - if ((rq->errors & ERROR_RESET) == ERROR_RESET) { - ++rq->errors; - return ide_do_reset(drive); - } - - if ((rq->errors & ERROR_RECAL) == ERROR_RECAL) - drive->special.b.recalibrate = 1; - - ++rq->errors; - - return ide_stopped; -} - -static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err) -{ - ide_hwif_t *hwif = drive->hwif; - - if ((stat & ATA_BUSY) || - ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) { - /* other bits are useless when BUSY */ - rq->errors |= ERROR_RESET; - } else { - /* add decoding error stuff */ - } - - if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ)) - /* force an abort */ - hwif->tp_ops->exec_command(hwif, ATA_CMD_IDLEIMMEDIATE); - - if (rq->errors >= ERROR_MAX) { - ide_kill_rq(drive, rq); - } else { - if ((rq->errors & ERROR_RESET) == ERROR_RESET) { - ++rq->errors; - return ide_do_reset(drive); - } - ++rq->errors; - } - - return ide_stopped; -} - -static ide_startstop_t -__ide_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err) -{ - if (drive->media == ide_disk) - return ide_ata_error(drive, rq, stat, err); - return ide_atapi_error(drive, rq, stat, err); -} - -/** - * ide_error - handle an error on the IDE - * @drive: drive the error occurred on - * @msg: message to report - * @stat: status bits - * - * ide_error() takes action based on the error returned by the drive. - * For normal I/O that may well include retries. We deal with - * both new-style (taskfile) and old style command handling here. - * In the case of taskfile command handling there is work left to - * do - */ - -ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, u8 stat) -{ - struct request *rq; - u8 err; - - err = ide_dump_status(drive, msg, stat); - - rq = drive->hwif->rq; - if (rq == NULL) - return ide_stopped; - - /* retry only "normal" I/O: */ - if (!blk_fs_request(rq)) { - rq->errors = 1; - ide_end_drive_cmd(drive, stat, err); - return ide_stopped; - } - - return __ide_error(drive, rq, stat, err); -} -EXPORT_SYMBOL_GPL(ide_error); - static void ide_tf_set_specify_cmd(ide_drive_t *drive, struct ide_taskfile *tf) { tf->nsect = drive->sect; diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index cf6c3036ae7..e0cfa2d2acc 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -446,8 +446,8 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) * * See also ide_execute_command */ -static void __ide_set_handler (ide_drive_t *drive, ide_handler_t *handler, - unsigned int timeout, ide_expiry_t *expiry) +void __ide_set_handler(ide_drive_t *drive, ide_handler_t *handler, + unsigned int timeout, ide_expiry_t *expiry) { ide_hwif_t *hwif = drive->hwif; @@ -517,301 +517,6 @@ void ide_execute_pkt_cmd(ide_drive_t *drive) } EXPORT_SYMBOL_GPL(ide_execute_pkt_cmd); -static inline void ide_complete_drive_reset(ide_drive_t *drive, int err) -{ - struct request *rq = drive->hwif->rq; - - if (rq && blk_special_request(rq) && rq->cmd[0] == REQ_DRIVE_RESET) - ide_end_request(drive, err ? err : 1, 0); -} - -/* needed below */ -static ide_startstop_t do_reset1(ide_drive_t *, int); - -/* - * atapi_reset_pollfunc() gets invoked to poll the interface for completion - * every 50ms during an atapi drive reset operation. If the drive has not yet - * responded, and we have not yet hit our maximum waiting time, then the timer - * is restarted for another 50ms. - */ -static ide_startstop_t atapi_reset_pollfunc(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - u8 stat; - - SELECT_DRIVE(drive); - udelay(10); - stat = hwif->tp_ops->read_status(hwif); - - if (OK_STAT(stat, 0, ATA_BUSY)) - printk(KERN_INFO "%s: ATAPI reset complete\n", drive->name); - else { - if (time_before(jiffies, hwif->poll_timeout)) { - ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20, - NULL); - /* continue polling */ - return ide_started; - } - /* end of polling */ - hwif->polling = 0; - printk(KERN_ERR "%s: ATAPI reset timed-out, status=0x%02x\n", - drive->name, stat); - /* do it the old fashioned way */ - return do_reset1(drive, 1); - } - /* done polling */ - hwif->polling = 0; - ide_complete_drive_reset(drive, 0); - return ide_stopped; -} - -static void ide_reset_report_error(ide_hwif_t *hwif, u8 err) -{ - static const char *err_master_vals[] = - { NULL, "passed", "formatter device error", - "sector buffer error", "ECC circuitry error", - "controlling MPU error" }; - - u8 err_master = err & 0x7f; - - printk(KERN_ERR "%s: reset: master: ", hwif->name); - if (err_master && err_master < 6) - printk(KERN_CONT "%s", err_master_vals[err_master]); - else - printk(KERN_CONT "error (0x%02x?)", err); - if (err & 0x80) - printk(KERN_CONT "; slave: failed"); - printk(KERN_CONT "\n"); -} - -/* - * reset_pollfunc() gets invoked to poll the interface for completion every 50ms - * during an ide reset operation. If the drives have not yet responded, - * and we have not yet hit our maximum waiting time, then the timer is restarted - * for another 50ms. - */ -static ide_startstop_t reset_pollfunc(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - const struct ide_port_ops *port_ops = hwif->port_ops; - u8 tmp; - int err = 0; - - if (port_ops && port_ops->reset_poll) { - err = port_ops->reset_poll(drive); - if (err) { - printk(KERN_ERR "%s: host reset_poll failure for %s.\n", - hwif->name, drive->name); - goto out; - } - } - - tmp = hwif->tp_ops->read_status(hwif); - - if (!OK_STAT(tmp, 0, ATA_BUSY)) { - if (time_before(jiffies, hwif->poll_timeout)) { - ide_set_handler(drive, &reset_pollfunc, HZ/20, NULL); - /* continue polling */ - return ide_started; - } - printk(KERN_ERR "%s: reset timed-out, status=0x%02x\n", - hwif->name, tmp); - drive->failures++; - err = -EIO; - } else { - tmp = ide_read_error(drive); - - if (tmp == 1) { - printk(KERN_INFO "%s: reset: success\n", hwif->name); - drive->failures = 0; - } else { - ide_reset_report_error(hwif, tmp); - drive->failures++; - err = -EIO; - } - } -out: - hwif->polling = 0; /* done polling */ - ide_complete_drive_reset(drive, err); - return ide_stopped; -} - -static void ide_disk_pre_reset(ide_drive_t *drive) -{ - int legacy = (drive->id[ATA_ID_CFS_ENABLE_2] & 0x0400) ? 0 : 1; - - drive->special.all = 0; - drive->special.b.set_geometry = legacy; - drive->special.b.recalibrate = legacy; - - drive->mult_count = 0; - drive->dev_flags &= ~IDE_DFLAG_PARKED; - - if ((drive->dev_flags & IDE_DFLAG_KEEP_SETTINGS) == 0 && - (drive->dev_flags & IDE_DFLAG_USING_DMA) == 0) - drive->mult_req = 0; - - if (drive->mult_req != drive->mult_count) - drive->special.b.set_multmode = 1; -} - -static void pre_reset(ide_drive_t *drive) -{ - const struct ide_port_ops *port_ops = drive->hwif->port_ops; - - if (drive->media == ide_disk) - ide_disk_pre_reset(drive); - else - drive->dev_flags |= IDE_DFLAG_POST_RESET; - - if (drive->dev_flags & IDE_DFLAG_USING_DMA) { - if (drive->crc_count) - ide_check_dma_crc(drive); - else - ide_dma_off(drive); - } - - if ((drive->dev_flags & IDE_DFLAG_KEEP_SETTINGS) == 0) { - if ((drive->dev_flags & IDE_DFLAG_USING_DMA) == 0) { - drive->dev_flags &= ~IDE_DFLAG_UNMASK; - drive->io_32bit = 0; - } - return; - } - - if (port_ops && port_ops->pre_reset) - port_ops->pre_reset(drive); - - if (drive->current_speed != 0xff) - drive->desired_speed = drive->current_speed; - drive->current_speed = 0xff; -} - -/* - * do_reset1() attempts to recover a confused drive by resetting it. - * Unfortunately, resetting a disk drive actually resets all devices on - * the same interface, so it can really be thought of as resetting the - * interface rather than resetting the drive. - * - * ATAPI devices have their own reset mechanism which allows them to be - * individually reset without clobbering other devices on the same interface. - * - * Unfortunately, the IDE interface does not generate an interrupt to let - * us know when the reset operation has finished, so we must poll for this. - * Equally poor, though, is the fact that this may a very long time to complete, - * (up to 30 seconds worstcase). So, instead of busy-waiting here for it, - * we set a timer to poll at 50ms intervals. - */ -static ide_startstop_t do_reset1(ide_drive_t *drive, int do_not_try_atapi) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - const struct ide_tp_ops *tp_ops = hwif->tp_ops; - const struct ide_port_ops *port_ops; - ide_drive_t *tdrive; - unsigned long flags, timeout; - int i; - DEFINE_WAIT(wait); - - spin_lock_irqsave(&hwif->lock, flags); - - /* We must not reset with running handlers */ - BUG_ON(hwif->handler != NULL); - - /* For an ATAPI device, first try an ATAPI SRST. */ - if (drive->media != ide_disk && !do_not_try_atapi) { - pre_reset(drive); - SELECT_DRIVE(drive); - udelay(20); - tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET); - ndelay(400); - hwif->poll_timeout = jiffies + WAIT_WORSTCASE; - hwif->polling = 1; - __ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20, NULL); - spin_unlock_irqrestore(&hwif->lock, flags); - return ide_started; - } - - /* We must not disturb devices in the IDE_DFLAG_PARKED state. */ - do { - unsigned long now; - - prepare_to_wait(&ide_park_wq, &wait, TASK_UNINTERRUPTIBLE); - timeout = jiffies; - ide_port_for_each_present_dev(i, tdrive, hwif) { - if ((tdrive->dev_flags & IDE_DFLAG_PARKED) && - time_after(tdrive->sleep, timeout)) - timeout = tdrive->sleep; - } - - now = jiffies; - if (time_before_eq(timeout, now)) - break; - - spin_unlock_irqrestore(&hwif->lock, flags); - timeout = schedule_timeout_uninterruptible(timeout - now); - spin_lock_irqsave(&hwif->lock, flags); - } while (timeout); - finish_wait(&ide_park_wq, &wait); - - /* - * First, reset any device state data we were maintaining - * for any of the drives on this interface. - */ - ide_port_for_each_dev(i, tdrive, hwif) - pre_reset(tdrive); - - if (io_ports->ctl_addr == 0) { - spin_unlock_irqrestore(&hwif->lock, flags); - ide_complete_drive_reset(drive, -ENXIO); - return ide_stopped; - } - - /* - * Note that we also set nIEN while resetting the device, - * to mask unwanted interrupts from the interface during the reset. - * However, due to the design of PC hardware, this will cause an - * immediate interrupt due to the edge transition it produces. - * This single interrupt gives us a "fast poll" for drives that - * recover from reset very quickly, saving us the first 50ms wait time. - * - * TODO: add ->softreset method and stop abusing ->set_irq - */ - /* set SRST and nIEN */ - tp_ops->set_irq(hwif, 4); - /* more than enough time */ - udelay(10); - /* clear SRST, leave nIEN (unless device is on the quirk list) */ - tp_ops->set_irq(hwif, drive->quirk_list == 2); - /* more than enough time */ - udelay(10); - hwif->poll_timeout = jiffies + WAIT_WORSTCASE; - hwif->polling = 1; - __ide_set_handler(drive, &reset_pollfunc, HZ/20, NULL); - - /* - * Some weird controller like resetting themselves to a strange - * state when the disks are reset this way. At least, the Winbond - * 553 documentation says that - */ - port_ops = hwif->port_ops; - if (port_ops && port_ops->resetproc) - port_ops->resetproc(drive); - - spin_unlock_irqrestore(&hwif->lock, flags); - return ide_started; -} - -/* - * ide_do_reset() is the entry point to the drive/interface reset code. - */ - -ide_startstop_t ide_do_reset(ide_drive_t *drive) -{ - return do_reset1(drive, 0); -} -EXPORT_SYMBOL(ide_do_reset); - /* * ide_wait_not_busy() waits for the currently selected device on the hwif * to report a non-busy status, see comments in ide_probe_port(). diff --git a/include/linux/ide.h b/include/linux/ide.h index 323c3710fbf..0c87ed52a87 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1146,11 +1146,14 @@ int generic_ide_ioctl(ide_drive_t *, struct block_device *, unsigned, unsigned l extern int ide_vlb_clk; extern int ide_pci_clk; -extern int ide_end_request (ide_drive_t *drive, int uptodate, int nrsecs); -int ide_end_dequeued_request(ide_drive_t *drive, struct request *rq, - int uptodate, int nr_sectors); - -extern void ide_set_handler (ide_drive_t *drive, ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry); +int ide_end_request(ide_drive_t *, int, int); +int ide_end_dequeued_request(ide_drive_t *, struct request *, int, int); +void ide_kill_rq(ide_drive_t *, struct request *); + +void __ide_set_handler(ide_drive_t *, ide_handler_t *, unsigned int, + ide_expiry_t *); +void ide_set_handler(ide_drive_t *, ide_handler_t *, unsigned int, + ide_expiry_t *); void ide_execute_command(ide_drive_t *, u8, ide_handler_t *, unsigned int, ide_expiry_t *); -- cgit v1.2.3-70-g09d2