From abbca103a02ff0e87569c38be518f9cb2d6baabc Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Mon, 14 Aug 2006 18:51:00 +0200 Subject: ieee1394: sbp2: better handling of transport errors If the target signals a transport failure via status block, complete the request with DID_BUSY to indicate to the SCSI subsystem that the command may succeed when retried. Also log diagnostic information if the status block shows a transport related problem. It may point to hardware faults. Signed-off-by: Stefan Richter --- drivers/ieee1394/sbp2.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) (limited to 'drivers/ieee1394/sbp2.c') diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index 5440cd05026..6b3350f71a8 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -2213,28 +2213,34 @@ static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags); if (SCpnt) { - if (STATUS_TEST_RS(sb->ORB_offset_hi_misc)) + u32 h = sb->ORB_offset_hi_misc; + u32 r = STATUS_GET_RESP(h); + + if (r != RESP_STATUS_REQUEST_COMPLETE) { + SBP2_WARN("resp 0x%x, sbp_status 0x%x", + r, STATUS_GET_SBP_STATUS(h)); scsi_status = + r == RESP_STATUS_TRANSPORT_FAILURE ? + SBP2_SCSI_STATUS_BUSY : SBP2_SCSI_STATUS_COMMAND_TERMINATED; + } /* * See if the target stored any scsi status information. */ - if (STATUS_GET_LEN(sb->ORB_offset_hi_misc) > 1) { + if (STATUS_GET_LEN(h) > 1) { SBP2_DEBUG("CHECK CONDITION"); scsi_status = sbp2_status_to_sense_data( (unchar *)sb, SCpnt->sense_buffer); } - /* * Check to see if the dead bit is set. If so, we'll * have to initiate a fetch agent reset. */ - if (STATUS_TEST_D(sb->ORB_offset_hi_misc)) { + if (STATUS_TEST_DEAD(h)) { SBP2_DEBUG("Dead bit set - " "initiating fetch agent reset"); sbp2_agent_reset(scsi_id, 0); } - SBP2_ORB_DEBUG("completing command orb %p", &command->command_orb); } -- cgit v1.2.3-70-g09d2