From ea01f2c18a22a2a8385909d64662afc92da6b13f Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 10 Sep 2013 13:49:00 +0100 Subject: iio: pressure-core: st: Allow for number of channels to vary At the moment the number of channels specified is dictated by the first sensor supported by the driver. As we add support for more sensors this is likely to vary. Instead of using the ARRAY_SIZE() of the LPS331AP's channel specifier we'll use a new adaptable 'struct st_sensors' element instead. Signed-off-by: Lee Jones Acked-by: Denis Ciocca Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/st_pressure_core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/iio/pressure') diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c index 506b02d27b0..93bff9ba05d 100644 --- a/drivers/iio/pressure/st_pressure_core.c +++ b/drivers/iio/pressure/st_pressure_core.c @@ -107,6 +107,7 @@ static const struct st_sensors st_press_sensors[] = { [0] = LPS331AP_PRESS_DEV_NAME, }, .ch = (struct iio_chan_spec *)st_press_lps331ap_channels, + .num_ch = ARRAY_SIZE(st_press_lps331ap_channels), .odr = { .addr = ST_PRESS_LPS331AP_ODR_ADDR, .mask = ST_PRESS_LPS331AP_ODR_MASK, @@ -245,7 +246,7 @@ int st_press_common_probe(struct iio_dev *indio_dev, pdata->num_data_channels = ST_PRESS_NUMBER_DATA_CHANNELS; pdata->multiread_bit = pdata->sensor->multi_read_bit; indio_dev->channels = pdata->sensor->ch; - indio_dev->num_channels = ARRAY_SIZE(st_press_lps331ap_channels); + indio_dev->num_channels = pdata->sensor->num_ch; if (pdata->sensor->fs.addr != 0) pdata->current_fullscale = (struct st_sensor_fullscale_avl *) -- cgit v1.2.3-70-g09d2