From 3017d90e8931fbd5dbde06b4e793aebb141e4977 Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Wed, 5 Feb 2014 16:58:00 +0000 Subject: iio: Add Freescale MPL115A2 pressure / temperature sensor driver I2C-controlled sensor with 10-bit pressure and temperature measurement datasheet: http://cache.freescale.com/files/sensors/doc/data_sheet/MPL3115A2.pdf v2: * use devm_iio_device_register() Signed-off-by: Peter Meerwald Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/Kconfig | 10 ++ drivers/iio/pressure/Makefile | 1 + drivers/iio/pressure/mpl115.c | 211 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 222 insertions(+) create mode 100644 drivers/iio/pressure/mpl115.c (limited to 'drivers/iio') diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig index d88ff17fedb..ffac8ac1efc 100644 --- a/drivers/iio/pressure/Kconfig +++ b/drivers/iio/pressure/Kconfig @@ -19,6 +19,16 @@ config HID_SENSOR_PRESS To compile this driver as a module, choose M here: the module will be called hid-sensor-press. +config MPL115 + tristate "Freescale MPL115A2 pressure sensor driver" + depends on I2C + help + Say yes here to build support for the Freescale MPL115A2 + pressure sensor connected via I2C. + + To compile this driver as a module, choose M here: the module + will be called mpl115. + config MPL3115 tristate "Freescale MPL3115A2 pressure sensor driver" depends on I2C diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile index 4a57bf65b04..c53d2500737 100644 --- a/drivers/iio/pressure/Makefile +++ b/drivers/iio/pressure/Makefile @@ -4,6 +4,7 @@ # When adding new entries keep the list in alphabetical order obj-$(CONFIG_HID_SENSOR_PRESS) += hid-sensor-press.o +obj-$(CONFIG_MPL115) += mpl115.o obj-$(CONFIG_MPL3115) += mpl3115.o obj-$(CONFIG_IIO_ST_PRESS) += st_pressure.o st_pressure-y := st_pressure_core.o diff --git a/drivers/iio/pressure/mpl115.c b/drivers/iio/pressure/mpl115.c new file mode 100644 index 00000000000..f5ecd6e19f5 --- /dev/null +++ b/drivers/iio/pressure/mpl115.c @@ -0,0 +1,211 @@ +/* + * mpl115.c - Support for Freescale MPL115A2 pressure/temperature sensor + * + * Copyright (c) 2014 Peter Meerwald + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * (7-bit I2C slave address 0x60) + * + * TODO: shutdown pin + * + */ + +#include +#include +#include +#include + +#define MPL115_PADC 0x00 /* pressure ADC output value, MSB first, 10 bit */ +#define MPL115_TADC 0x02 /* temperature ADC output value, MSB first, 10 bit */ +#define MPL115_A0 0x04 /* 12 bit integer, 3 bit fraction */ +#define MPL115_B1 0x06 /* 2 bit integer, 13 bit fraction */ +#define MPL115_B2 0x08 /* 1 bit integer, 14 bit fraction */ +#define MPL115_C12 0x0a /* 0 bit integer, 13 bit fraction */ +#define MPL115_CONVERT 0x12 /* convert temperature and pressure */ + +struct mpl115_data { + struct i2c_client *client; + struct mutex lock; + s16 a0; + s16 b1, b2; + s16 c12; +}; + +static int mpl115_request(struct mpl115_data *data) +{ + int ret = i2c_smbus_write_byte_data(data->client, MPL115_CONVERT, 0); + if (ret < 0) + return ret; + + usleep_range(3000, 4000); + + return 0; +} + +static int mpl115_comp_pressure(struct mpl115_data *data, int *val, int *val2) +{ + int ret; + u16 padc, tadc; + int a1, y1, pcomp; + unsigned kpa; + + mutex_lock(&data->lock); + ret = mpl115_request(data); + if (ret < 0) + goto done; + + ret = i2c_smbus_read_word_swapped(data->client, MPL115_PADC); + if (ret < 0) + goto done; + padc = ret >> 6; + + ret = i2c_smbus_read_word_swapped(data->client, MPL115_TADC); + if (ret < 0) + goto done; + tadc = ret >> 6; + + /* see Freescale AN3785 */ + a1 = data->b1 + ((data->c12 * tadc) >> 11); + y1 = (data->a0 << 10) + a1 * padc; + + /* compensated pressure with 4 fractional bits */ + pcomp = (y1 + ((data->b2 * (int) tadc) >> 1)) >> 9; + + kpa = pcomp * (115 - 50) / 1023 + (50 << 4); + *val = kpa >> 4; + *val2 = (kpa & 15) * (1000000 >> 4); +done: + mutex_unlock(&data->lock); + return ret; +} + +static int mpl115_read_temp(struct mpl115_data *data) +{ + int ret; + + mutex_lock(&data->lock); + ret = mpl115_request(data); + if (ret < 0) + goto done; + ret = i2c_smbus_read_word_swapped(data->client, MPL115_TADC); +done: + mutex_unlock(&data->lock); + return ret; +} + +static int mpl115_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct mpl115_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + ret = mpl115_comp_pressure(data, val, val2); + if (ret < 0) + return ret; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_RAW: + /* temperature -5.35 C / LSB, 472 LSB is 25 C */ + ret = mpl115_read_temp(data); + if (ret < 0) + return ret; + *val = ret >> 6; + return IIO_VAL_INT; + case IIO_CHAN_INFO_OFFSET: + *val = 605; + *val2 = 750000; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_SCALE: + *val = -186; + *val2 = 915888; + return IIO_VAL_INT_PLUS_MICRO; + } + return -EINVAL; +} + +static const struct iio_chan_spec mpl115_channels[] = { + { + .type = IIO_PRESSURE, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + }, + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE), + }, +}; + +static const struct iio_info mpl115_info = { + .read_raw = &mpl115_read_raw, + .driver_module = THIS_MODULE, +}; + +static int mpl115_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct mpl115_data *data; + struct iio_dev *indio_dev; + int ret; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) + return -ENODEV; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + data->client = client; + mutex_init(&data->lock); + + i2c_set_clientdata(client, indio_dev); + indio_dev->info = &mpl115_info; + indio_dev->name = id->name; + indio_dev->dev.parent = &client->dev; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = mpl115_channels; + indio_dev->num_channels = ARRAY_SIZE(mpl115_channels); + + ret = i2c_smbus_read_word_swapped(data->client, MPL115_A0); + if (ret < 0) + return ret; + data->a0 = ret; + ret = i2c_smbus_read_word_swapped(data->client, MPL115_B1); + if (ret < 0) + return ret; + data->b1 = ret; + ret = i2c_smbus_read_word_swapped(data->client, MPL115_B2); + if (ret < 0) + return ret; + data->b2 = ret; + ret = i2c_smbus_read_word_swapped(data->client, MPL115_C12); + if (ret < 0) + return ret; + data->c12 = ret; + + return devm_iio_device_register(&client->dev, indio_dev); +} + +static const struct i2c_device_id mpl115_id[] = { + { "mpl115", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mpl115_id); + +static struct i2c_driver mpl115_driver = { + .driver = { + .name = "mpl115", + }, + .probe = mpl115_probe, + .id_table = mpl115_id, +}; +module_i2c_driver(mpl115_driver); + +MODULE_AUTHOR("Peter Meerwald "); +MODULE_DESCRIPTION("Freescale MPL115 pressure/temperature driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3-70-g09d2