From e748783c55f074046134d2ef15a6e04dd467ecfc Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Fri, 29 Mar 2013 14:54:00 +0000 Subject: iio: at91_adc: add sleep mode support The sleep mode will allow to put the adc in sleep between conversion. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Ludovic Desroches Acked-by: Maxime Ripard Signed-off-by: Jonathan Cameron --- drivers/iio/adc/at91_adc.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) (limited to 'drivers/iio') diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index 3fb3fe48a98..7295bc5280b 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -52,6 +52,7 @@ struct at91_adc_state { void __iomem *reg_base; struct at91_adc_reg_desc *registers; u8 startup_time; + bool sleep_mode; struct iio_trigger **trig; struct at91_adc_trigger *trigger_list; u32 trigger_number; @@ -455,6 +456,8 @@ static int at91_adc_probe_dt(struct at91_adc_state *st, } st->num_channels = prop; + st->sleep_mode = of_property_read_bool(node, "atmel,adc-sleep-mode"); + if (of_property_read_u32(node, "atmel,adc-startup-time", &prop)) { dev_err(&idev->dev, "Missing adc-startup-time property in the DT.\n"); ret = -EINVAL; @@ -580,6 +583,7 @@ static int at91_adc_probe(struct platform_device *pdev) struct iio_dev *idev; struct at91_adc_state *st; struct resource *res; + u32 reg; idev = iio_device_alloc(sizeof(struct at91_adc_state)); if (idev == NULL) { @@ -687,16 +691,13 @@ static int at91_adc_probe(struct platform_device *pdev) */ ticks = round_up((st->startup_time * adc_clk / 1000000) - 1, 8) / 8; - + reg = AT91_ADC_PRESCAL_(prsc) & AT91_ADC_PRESCAL; + reg |= AT91_ADC_STARTUP_(ticks) & AT91_ADC_STARTUP; if (st->low_res) - at91_adc_writel(st, AT91_ADC_MR, - AT91_ADC_LOWRES | - (AT91_ADC_PRESCAL_(prsc) & AT91_ADC_PRESCAL) | - (AT91_ADC_STARTUP_(ticks) & AT91_ADC_STARTUP)); - else - at91_adc_writel(st, AT91_ADC_MR, - (AT91_ADC_PRESCAL_(prsc) & AT91_ADC_PRESCAL) | - (AT91_ADC_STARTUP_(ticks) & AT91_ADC_STARTUP)); + reg |= AT91_ADC_LOWRES; + if (st->sleep_mode) + reg |= AT91_ADC_SLEEP; + at91_adc_writel(st, AT91_ADC_MR, reg); /* Setup the ADC channels available on the board */ ret = at91_adc_channel_init(idev); -- cgit v1.2.3-70-g09d2