From 51f65ebccf55121832c265838f93949f898b12ff Mon Sep 17 00:00:00 2001 From: Bryan O'Sullivan Date: Wed, 8 Nov 2006 17:44:58 -0800 Subject: [PATCH] IB/ipath - program intconfig register using new HT irq hook Eric's changes to the htirq infrastructure require corresponding modifications to the ipath HT driver code so that interrupts are still delivered properly. Signed-off-by: Bryan O'Sullivan Cc: Eric W. Biederman Cc: Roland Dreier Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/infiniband/hw/ipath/ipath_driver.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) (limited to 'drivers/infiniband/hw/ipath/ipath_driver.c') diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c index b4ffaa7bcbb..09a13c1fc46 100644 --- a/drivers/infiniband/hw/ipath/ipath_driver.c +++ b/drivers/infiniband/hw/ipath/ipath_driver.c @@ -304,7 +304,7 @@ static int __devinit ipath_init_one(struct pci_dev *pdev, } addr = pci_resource_start(pdev, 0); len = pci_resource_len(pdev, 0); - ipath_cdbg(VERBOSE, "regbase (0) %llx len %d irq %x, vend %x/%x " + ipath_cdbg(VERBOSE, "regbase (0) %llx len %d pdev->irq %d, vend %x/%x " "driver_data %lx\n", addr, len, pdev->irq, ent->vendor, ent->device, ent->driver_data); @@ -467,15 +467,15 @@ static int __devinit ipath_init_one(struct pci_dev *pdev, * check 0 irq after we return from chip-specific bus setup, since * that can affect this due to setup */ - if (!pdev->irq) + if (!dd->ipath_irq) ipath_dev_err(dd, "irq is 0, BIOS error? Interrupts won't " "work\n"); else { - ret = request_irq(pdev->irq, ipath_intr, IRQF_SHARED, + ret = request_irq(dd->ipath_irq, ipath_intr, IRQF_SHARED, IPATH_DRV_NAME, dd); if (ret) { ipath_dev_err(dd, "Couldn't setup irq handler, " - "irq=%u: %d\n", pdev->irq, ret); + "irq=%d: %d\n", dd->ipath_irq, ret); goto bail_iounmap; } } @@ -637,11 +637,10 @@ static void __devexit ipath_remove_one(struct pci_dev *pdev) * free up port 0 (kernel) rcvhdr, egr bufs, and eventually tid bufs * for all versions of the driver, if they were allocated */ - if (pdev->irq) { - ipath_cdbg(VERBOSE, - "unit %u free_irq of irq %x\n", - dd->ipath_unit, pdev->irq); - free_irq(pdev->irq, dd); + if (dd->ipath_irq) { + ipath_cdbg(VERBOSE, "unit %u free irq %d\n", + dd->ipath_unit, dd->ipath_irq); + dd->ipath_f_free_irq(dd); } else ipath_dbg("irq is 0, not doing free_irq " "for unit %u\n", dd->ipath_unit); -- cgit v1.2.3-70-g09d2 From e757bef270e21453bf507df200e2fb477c076da6 Mon Sep 17 00:00:00 2001 From: Bryan O'Sullivan Date: Thu, 16 Nov 2006 01:19:19 -0800 Subject: [PATCH] IB/ipath - fix driver build for platforms with PCI, but not HT The PCI Express and Hypertransport chip-specific source files should only be built when the kernel has the capability of actually compiling them. This fixes the driver build on, for example, ia64. Signed-off-by: Bryan O'Sullivan Cc: "Eric W. Biederman" Cc: Roland Dreier Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/infiniband/hw/ipath/Kconfig | 2 +- drivers/infiniband/hw/ipath/Makefile | 5 +++-- drivers/infiniband/hw/ipath/ipath_driver.c | 4 ++++ 3 files changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers/infiniband/hw/ipath/ipath_driver.c') diff --git a/drivers/infiniband/hw/ipath/Kconfig b/drivers/infiniband/hw/ipath/Kconfig index 574a678e7fd..5ca471ac654 100644 --- a/drivers/infiniband/hw/ipath/Kconfig +++ b/drivers/infiniband/hw/ipath/Kconfig @@ -1,6 +1,6 @@ config INFINIBAND_IPATH tristate "QLogic InfiniPath Driver" - depends on PCI_MSI && 64BIT && INFINIBAND + depends on (PCI_MSI || HT_IRQ) && 64BIT && INFINIBAND ---help--- This is a driver for QLogic InfiniPath host channel adapters, including InfiniBand verbs support. This driver allows these diff --git a/drivers/infiniband/hw/ipath/Makefile b/drivers/infiniband/hw/ipath/Makefile index 5e29cb0095e..7dc10551cf1 100644 --- a/drivers/infiniband/hw/ipath/Makefile +++ b/drivers/infiniband/hw/ipath/Makefile @@ -10,8 +10,6 @@ ib_ipath-y := \ ipath_eeprom.o \ ipath_file_ops.o \ ipath_fs.o \ - ipath_iba6110.o \ - ipath_iba6120.o \ ipath_init_chip.o \ ipath_intr.o \ ipath_keys.o \ @@ -31,5 +29,8 @@ ib_ipath-y := \ ipath_verbs_mcast.o \ ipath_verbs.o +ib_ipath-$(CONFIG_HT_IRQ) += ipath_iba6110.o +ib_ipath-$(CONFIG_PCI_MSI) += ipath_iba6120.o + ib_ipath-$(CONFIG_X86_64) += ipath_wc_x86_64.o ib_ipath-$(CONFIG_PPC64) += ipath_wc_ppc64.o diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c index 09a13c1fc46..1aeddb48e35 100644 --- a/drivers/infiniband/hw/ipath/ipath_driver.c +++ b/drivers/infiniband/hw/ipath/ipath_driver.c @@ -390,12 +390,16 @@ static int __devinit ipath_init_one(struct pci_dev *pdev, /* setup the chip-specific functions, as early as possible. */ switch (ent->device) { +#ifdef CONFIG_HT_IRQ case PCI_DEVICE_ID_INFINIPATH_HT: ipath_init_iba6110_funcs(dd); break; +#endif +#ifdef CONFIG_PCI_MSI case PCI_DEVICE_ID_INFINIPATH_PE800: ipath_init_iba6120_funcs(dd); break; +#endif default: ipath_dev_err(dd, "Found unknown QLogic deviceid 0x%x, " "failing\n", ent->device); -- cgit v1.2.3-70-g09d2