From 1d08382a0e8a272fed9517a1b39ae6be634a77d5 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Wed, 8 Jun 2011 11:03:23 +0200 Subject: input: pmic8xxx-keypad: Do not use mfd_get_data() mfd_get_data() has been removed from the MFD API. Cc: Anirudh Ghayal Signed-off-by: Samuel Ortiz --- drivers/input/keyboard/pmic8xxx-keypad.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/input/keyboard') diff --git a/drivers/input/keyboard/pmic8xxx-keypad.c b/drivers/input/keyboard/pmic8xxx-keypad.c index 40b02ae96f8..6229c3e8e78 100644 --- a/drivers/input/keyboard/pmic8xxx-keypad.c +++ b/drivers/input/keyboard/pmic8xxx-keypad.c @@ -520,7 +520,8 @@ static void pmic8xxx_kp_close(struct input_dev *dev) */ static int __devinit pmic8xxx_kp_probe(struct platform_device *pdev) { - const struct pm8xxx_keypad_platform_data *pdata = mfd_get_data(pdev); + const struct pm8xxx_keypad_platform_data *pdata = + dev_get_platdata(&pdev->dev); const struct matrix_keymap_data *keymap_data; struct pmic8xxx_kp *kp; int rc; -- cgit v1.2.3-70-g09d2 From ec4665c46b11f6e444911ba73dddae6044dec909 Mon Sep 17 00:00:00 2001 From: Yong Zhang Date: Wed, 7 Sep 2011 14:04:16 -0700 Subject: Input: remove IRQF_DISABLED from drivers This flag is a NOOP and can be removed now. Signed-off-by: Yong Zhang Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/adp5588-keys.c | 2 +- drivers/input/keyboard/davinci_keyscan.c | 2 +- drivers/input/keyboard/ep93xx_keypad.c | 2 +- drivers/input/keyboard/imx_keypad.c | 2 +- drivers/input/keyboard/jornada720_kbd.c | 2 +- drivers/input/keyboard/matrix_keypad.c | 1 - drivers/input/keyboard/pxa27x_keypad.c | 2 +- drivers/input/keyboard/pxa930_rotary.c | 2 +- drivers/input/keyboard/w90p910_keypad.c | 2 +- drivers/input/misc/ixp4xx-beeper.c | 2 +- drivers/input/mouse/pxa930_trkball.c | 2 +- drivers/input/mouse/synaptics_i2c.c | 2 +- drivers/input/touchscreen/atmel_tsadcc.c | 2 +- drivers/input/touchscreen/h3600_ts_input.c | 4 ++-- drivers/input/touchscreen/hp680_ts_input.c | 2 +- drivers/input/touchscreen/jornada720_ts.c | 2 +- drivers/input/touchscreen/lpc32xx_ts.c | 2 +- drivers/input/touchscreen/s3c2410_ts.c | 2 +- drivers/input/touchscreen/w90p910_ts.c | 2 +- 19 files changed, 19 insertions(+), 20 deletions(-) (limited to 'drivers/input/keyboard') diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c index 7b404e5443e..b570ed30e8a 100644 --- a/drivers/input/keyboard/adp5588-keys.c +++ b/drivers/input/keyboard/adp5588-keys.c @@ -550,7 +550,7 @@ static int __devinit adp5588_probe(struct i2c_client *client, } error = request_irq(client->irq, adp5588_irq, - IRQF_TRIGGER_FALLING | IRQF_DISABLED, + IRQF_TRIGGER_FALLING, client->dev.driver->name, kpad); if (error) { dev_err(&client->dev, "irq %d busy?\n", client->irq); diff --git a/drivers/input/keyboard/davinci_keyscan.c b/drivers/input/keyboard/davinci_keyscan.c index cd89d17162a..9d82b3aeff5 100644 --- a/drivers/input/keyboard/davinci_keyscan.c +++ b/drivers/input/keyboard/davinci_keyscan.c @@ -271,7 +271,7 @@ static int __init davinci_ks_probe(struct platform_device *pdev) } error = request_irq(davinci_ks->irq, davinci_ks_interrupt, - IRQF_DISABLED, pdev->name, davinci_ks); + 0, pdev->name, davinci_ks); if (error < 0) { dev_err(dev, "unable to register davinci key scan interrupt\n"); goto fail5; diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c index aa17e024d80..4662c5da801 100644 --- a/drivers/input/keyboard/ep93xx_keypad.c +++ b/drivers/input/keyboard/ep93xx_keypad.c @@ -323,7 +323,7 @@ static int __devinit ep93xx_keypad_probe(struct platform_device *pdev) platform_set_drvdata(pdev, keypad); err = request_irq(keypad->irq, ep93xx_keypad_irq_handler, - IRQF_DISABLED, pdev->name, keypad); + 0, pdev->name, keypad); if (err) goto failed_free_dev; diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c index d92c15c39e6..4b093faf578 100644 --- a/drivers/input/keyboard/imx_keypad.c +++ b/drivers/input/keyboard/imx_keypad.c @@ -510,7 +510,7 @@ static int __devinit imx_keypad_probe(struct platform_device *pdev) /* Ensure that the keypad will stay dormant until opened */ imx_keypad_inhibit(keypad); - error = request_irq(irq, imx_keypad_irq_handler, IRQF_DISABLED, + error = request_irq(irq, imx_keypad_irq_handler, 0, pdev->name, keypad); if (error) { dev_err(&pdev->dev, "failed to request IRQ\n"); diff --git a/drivers/input/keyboard/jornada720_kbd.c b/drivers/input/keyboard/jornada720_kbd.c index 2cd3e1d56ea..0aa6740e60d 100644 --- a/drivers/input/keyboard/jornada720_kbd.c +++ b/drivers/input/keyboard/jornada720_kbd.c @@ -129,7 +129,7 @@ static int __devinit jornada720_kbd_probe(struct platform_device *pdev) err = request_irq(IRQ_GPIO0, jornada720_kbd_interrupt, - IRQF_DISABLED | IRQF_TRIGGER_FALLING, + IRQF_TRIGGER_FALLING, "jornadakbd", pdev); if (err) { printk(KERN_INFO "jornadakbd720_kbd: Unable to grab IRQ\n"); diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c index b02e4268e18..e2ae657717e 100644 --- a/drivers/input/keyboard/matrix_keypad.c +++ b/drivers/input/keyboard/matrix_keypad.c @@ -343,7 +343,6 @@ static int __devinit init_matrix_gpio(struct platform_device *pdev, for (i = 0; i < pdata->num_row_gpios; i++) { err = request_irq(gpio_to_irq(pdata->row_gpios[i]), matrix_keypad_interrupt, - IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "matrix-keypad", keypad); diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c index 4b0ec35259a..eca6ae63de1 100644 --- a/drivers/input/keyboard/pxa27x_keypad.c +++ b/drivers/input/keyboard/pxa27x_keypad.c @@ -535,7 +535,7 @@ static int __devinit pxa27x_keypad_probe(struct platform_device *pdev) input_dev->evbit[0] |= BIT_MASK(EV_REL); } - error = request_irq(irq, pxa27x_keypad_irq_handler, IRQF_DISABLED, + error = request_irq(irq, pxa27x_keypad_irq_handler, 0, pdev->name, keypad); if (error) { dev_err(&pdev->dev, "failed to request IRQ\n"); diff --git a/drivers/input/keyboard/pxa930_rotary.c b/drivers/input/keyboard/pxa930_rotary.c index b7123a44b6e..35451bf780c 100644 --- a/drivers/input/keyboard/pxa930_rotary.c +++ b/drivers/input/keyboard/pxa930_rotary.c @@ -148,7 +148,7 @@ static int __devinit pxa930_rotary_probe(struct platform_device *pdev) r->input_dev = input_dev; input_set_drvdata(input_dev, r); - err = request_irq(irq, rotary_irq, IRQF_DISABLED, + err = request_irq(irq, rotary_irq, 0, "enhanced rotary", r); if (err) { dev_err(&pdev->dev, "failed to request IRQ\n"); diff --git a/drivers/input/keyboard/w90p910_keypad.c b/drivers/input/keyboard/w90p910_keypad.c index ee2bf6bcf29..318586dadac 100644 --- a/drivers/input/keyboard/w90p910_keypad.c +++ b/drivers/input/keyboard/w90p910_keypad.c @@ -203,7 +203,7 @@ static int __devinit w90p910_keypad_probe(struct platform_device *pdev) input_dev->keycode, input_dev->keybit); error = request_irq(keypad->irq, w90p910_keypad_irq_handler, - IRQF_DISABLED, pdev->name, keypad); + 0, pdev->name, keypad); if (error) { dev_err(&pdev->dev, "failed to request IRQ\n"); goto failed_put_clk; diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c index 1f38302a595..302ab46ce75 100644 --- a/drivers/input/misc/ixp4xx-beeper.c +++ b/drivers/input/misc/ixp4xx-beeper.c @@ -111,7 +111,7 @@ static int __devinit ixp4xx_spkr_probe(struct platform_device *dev) input_dev->event = ixp4xx_spkr_event; err = request_irq(IRQ_IXP4XX_TIMER2, &ixp4xx_spkr_interrupt, - IRQF_DISABLED | IRQF_NO_SUSPEND, "ixp4xx-beeper", + IRQF_NO_SUSPEND, "ixp4xx-beeper", (void *) dev->id); if (err) goto err_free_device; diff --git a/drivers/input/mouse/pxa930_trkball.c b/drivers/input/mouse/pxa930_trkball.c index 6c5d84fcdea..ee3b0ca9d59 100644 --- a/drivers/input/mouse/pxa930_trkball.c +++ b/drivers/input/mouse/pxa930_trkball.c @@ -183,7 +183,7 @@ static int __devinit pxa930_trkball_probe(struct platform_device *pdev) /* held the module in reset, will be enabled in open() */ pxa930_trkball_disable(trkball); - error = request_irq(irq, pxa930_trkball_interrupt, IRQF_DISABLED, + error = request_irq(irq, pxa930_trkball_interrupt, 0, pdev->name, trkball); if (error) { dev_err(&pdev->dev, "failed to request irq: %d\n", error); diff --git a/drivers/input/mouse/synaptics_i2c.c b/drivers/input/mouse/synaptics_i2c.c index cba3c84d2f2..e28e9ce0f7e 100644 --- a/drivers/input/mouse/synaptics_i2c.c +++ b/drivers/input/mouse/synaptics_i2c.c @@ -570,7 +570,7 @@ static int __devinit synaptics_i2c_probe(struct i2c_client *client, "Requesting IRQ: %d\n", touch->client->irq); ret = request_irq(touch->client->irq, synaptics_i2c_irq, - IRQF_DISABLED|IRQ_TYPE_EDGE_FALLING, + IRQ_TYPE_EDGE_FALLING, DRIVER_NAME, touch); if (ret) { dev_warn(&touch->client->dev, diff --git a/drivers/input/touchscreen/atmel_tsadcc.c b/drivers/input/touchscreen/atmel_tsadcc.c index 432c69be6ac..122a8788365 100644 --- a/drivers/input/touchscreen/atmel_tsadcc.c +++ b/drivers/input/touchscreen/atmel_tsadcc.c @@ -229,7 +229,7 @@ static int __devinit atmel_tsadcc_probe(struct platform_device *pdev) goto err_release_mem; } - err = request_irq(ts_dev->irq, atmel_tsadcc_interrupt, IRQF_DISABLED, + err = request_irq(ts_dev->irq, atmel_tsadcc_interrupt, 0, pdev->dev.driver->name, ts_dev); if (err) { dev_err(&pdev->dev, "failed to allocate irq.\n"); diff --git a/drivers/input/touchscreen/h3600_ts_input.c b/drivers/input/touchscreen/h3600_ts_input.c index 211811ae552..6107e563e68 100644 --- a/drivers/input/touchscreen/h3600_ts_input.c +++ b/drivers/input/touchscreen/h3600_ts_input.c @@ -396,14 +396,14 @@ static int h3600ts_connect(struct serio *serio, struct serio_driver *drv) set_GPIO_IRQ_edge(GPIO_BITSY_NPOWER_BUTTON, GPIO_RISING_EDGE); if (request_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, action_button_handler, - IRQF_SHARED | IRQF_DISABLED, "h3600_action", ts->dev)) { + IRQF_SHARED, "h3600_action", ts->dev)) { printk(KERN_ERR "h3600ts.c: Could not allocate Action Button IRQ!\n"); err = -EBUSY; goto fail1; } if (request_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, npower_button_handler, - IRQF_SHARED | IRQF_DISABLED, "h3600_suspend", ts->dev)) { + IRQF_SHARED, "h3600_suspend", ts->dev)) { printk(KERN_ERR "h3600ts.c: Could not allocate Power Button IRQ!\n"); err = -EBUSY; goto fail2; diff --git a/drivers/input/touchscreen/hp680_ts_input.c b/drivers/input/touchscreen/hp680_ts_input.c index dd4e8f020b9..639a6044183 100644 --- a/drivers/input/touchscreen/hp680_ts_input.c +++ b/drivers/input/touchscreen/hp680_ts_input.c @@ -93,7 +93,7 @@ static int __init hp680_ts_init(void) hp680_ts_dev->phys = "hp680_ts/input0"; if (request_irq(HP680_TS_IRQ, hp680_ts_interrupt, - IRQF_DISABLED, MODNAME, 0) < 0) { + 0, MODNAME, 0) < 0) { printk(KERN_ERR "hp680_touchscreen.c: Can't allocate irq %d\n", HP680_TS_IRQ); err = -EBUSY; diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c index 4b0a061811f..50076c2d59e 100644 --- a/drivers/input/touchscreen/jornada720_ts.c +++ b/drivers/input/touchscreen/jornada720_ts.c @@ -127,7 +127,7 @@ static int __devinit jornada720_ts_probe(struct platform_device *pdev) error = request_irq(IRQ_GPIO9, jornada720_ts_interrupt, - IRQF_DISABLED | IRQF_TRIGGER_RISING, + IRQF_TRIGGER_RISING, "HP7XX Touchscreen driver", pdev); if (error) { printk(KERN_INFO "HP7XX TS : Unable to acquire irq!\n"); diff --git a/drivers/input/touchscreen/lpc32xx_ts.c b/drivers/input/touchscreen/lpc32xx_ts.c index dcf803f5a1f..0a484ed5295 100644 --- a/drivers/input/touchscreen/lpc32xx_ts.c +++ b/drivers/input/touchscreen/lpc32xx_ts.c @@ -276,7 +276,7 @@ static int __devinit lpc32xx_ts_probe(struct platform_device *pdev) input_set_drvdata(input, tsc); error = request_irq(tsc->irq, lpc32xx_ts_interrupt, - IRQF_DISABLED, pdev->name, tsc); + 0, pdev->name, tsc); if (error) { dev_err(&pdev->dev, "failed requesting interrupt\n"); goto err_put_clock; diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c index 8feb7f3c8be..64ce697a345 100644 --- a/drivers/input/touchscreen/s3c2410_ts.c +++ b/drivers/input/touchscreen/s3c2410_ts.c @@ -328,7 +328,7 @@ static int __devinit s3c2410ts_probe(struct platform_device *pdev) ts.shift = info->oversampling_shift; ts.features = platform_get_device_id(pdev)->driver_data; - ret = request_irq(ts.irq_tc, stylus_irq, IRQF_DISABLED, + ret = request_irq(ts.irq_tc, stylus_irq, 0, "s3c2410_ts_pen", ts.input); if (ret) { dev_err(dev, "cannot get TC interrupt\n"); diff --git a/drivers/input/touchscreen/w90p910_ts.c b/drivers/input/touchscreen/w90p910_ts.c index 7a45d68c351..217aa51135c 100644 --- a/drivers/input/touchscreen/w90p910_ts.c +++ b/drivers/input/touchscreen/w90p910_ts.c @@ -279,7 +279,7 @@ static int __devinit w90x900ts_probe(struct platform_device *pdev) w90p910_ts->irq_num = platform_get_irq(pdev, 0); if (request_irq(w90p910_ts->irq_num, w90p910_ts_interrupt, - IRQF_DISABLED, "w90p910ts", w90p910_ts)) { + 0, "w90p910ts", w90p910_ts)) { err = -EBUSY; goto fail4; } -- cgit v1.2.3-70-g09d2 From 9299c08d8bfc7256645f4bf3943f80d8943fe844 Mon Sep 17 00:00:00 2001 From: Harvey Yang Date: Thu, 8 Sep 2011 09:46:55 -0700 Subject: Input: tc3589x-keypad - fix section mismatch warning WARNING: drivers/input/keyboard/built-in.o(.text+0xb55b): Section mismatch in reference from the function tc3589x_keypad_open() to the function .devinit.text:tc3589x_keypad_init_key_hardware() The function tc3589x_keypad_open() references the function __devinit tc3589x_keypad_init_key_hardware(). This is often because tc3589x_keypad_open lacks a __devinit annotation or the annotation of tc3589x_keypad_init_key_hardware is wrong. Signed-off-by: Harvey Yang Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/tc3589x-keypad.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/input/keyboard') diff --git a/drivers/input/keyboard/tc3589x-keypad.c b/drivers/input/keyboard/tc3589x-keypad.c index 99122f59e98..f60c9e82f20 100644 --- a/drivers/input/keyboard/tc3589x-keypad.c +++ b/drivers/input/keyboard/tc3589x-keypad.c @@ -90,7 +90,7 @@ struct tc_keypad { bool keypad_stopped; }; -static int __devinit tc3589x_keypad_init_key_hardware(struct tc_keypad *keypad) +static int tc3589x_keypad_init_key_hardware(struct tc_keypad *keypad) { int ret; struct tc3589x *tc3589x = keypad->tc3589x; -- cgit v1.2.3-70-g09d2 From d0d150ec28ab05eb2ec8cf9fcb7c9753ec95e0d4 Mon Sep 17 00:00:00 2001 From: Rakesh Iyer Date: Thu, 8 Sep 2011 15:34:11 -0700 Subject: Input: tegra-kbc - fix wakeup from suspend For wakeup to be reliable, kbc needs to be in interrupt mode before suspend. Created common routine to control the FIFO interrupt. Added synchronization to ensure orderly suspend. Signed-off-by: Rakesh Iyer Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/tegra-kbc.c | 58 ++++++++++++++++++++++++++++---------- 1 file changed, 43 insertions(+), 15 deletions(-) (limited to 'drivers/input/keyboard') diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c index a5a77915c65..8fb474f0394 100644 --- a/drivers/input/keyboard/tegra-kbc.c +++ b/drivers/input/keyboard/tegra-kbc.c @@ -55,6 +55,7 @@ #define KBC_ROW_CFG0_0 0x8 #define KBC_COL_CFG0_0 0x18 +#define KBC_TO_CNT_0 0x24 #define KBC_INIT_DLY_0 0x28 #define KBC_RPT_DLY_0 0x2c #define KBC_KP_ENT0_0 0x30 @@ -70,6 +71,7 @@ struct tegra_kbc { spinlock_t lock; unsigned int repoll_dly; unsigned long cp_dly_jiffies; + unsigned int cp_to_wkup_dly; bool use_fn_map; bool use_ghost_filter; const struct tegra_kbc_platform_data *pdata; @@ -341,6 +343,18 @@ static void tegra_kbc_report_keys(struct tegra_kbc *kbc) kbc->num_pressed_keys = num_down; } +static void tegra_kbc_set_fifo_interrupt(struct tegra_kbc *kbc, bool enable) +{ + u32 val; + + val = readl(kbc->mmio + KBC_CONTROL_0); + if (enable) + val |= KBC_CONTROL_FIFO_CNT_INT_EN; + else + val &= ~KBC_CONTROL_FIFO_CNT_INT_EN; + writel(val, kbc->mmio + KBC_CONTROL_0); +} + static void tegra_kbc_keypress_timer(unsigned long data) { struct tegra_kbc *kbc = (struct tegra_kbc *)data; @@ -370,9 +384,7 @@ static void tegra_kbc_keypress_timer(unsigned long data) /* All keys are released so enable the keypress interrupt */ spin_lock_irqsave(&kbc->lock, flags); - val = readl(kbc->mmio + KBC_CONTROL_0); - val |= KBC_CONTROL_FIFO_CNT_INT_EN; - writel(val, kbc->mmio + KBC_CONTROL_0); + tegra_kbc_set_fifo_interrupt(kbc, true); spin_unlock_irqrestore(&kbc->lock, flags); } } @@ -380,15 +392,13 @@ static void tegra_kbc_keypress_timer(unsigned long data) static irqreturn_t tegra_kbc_isr(int irq, void *args) { struct tegra_kbc *kbc = args; - u32 val, ctl; + u32 val; /* * Until all keys are released, defer further processing to * the polling loop in tegra_kbc_keypress_timer */ - ctl = readl(kbc->mmio + KBC_CONTROL_0); - ctl &= ~KBC_CONTROL_FIFO_CNT_INT_EN; - writel(ctl, kbc->mmio + KBC_CONTROL_0); + tegra_kbc_set_fifo_interrupt(kbc, false); /* * Quickly bail out & reenable interrupts if the fifo threshold @@ -404,8 +414,7 @@ static irqreturn_t tegra_kbc_isr(int irq, void *args) */ mod_timer(&kbc->timer, jiffies + kbc->cp_dly_jiffies); } else { - ctl |= KBC_CONTROL_FIFO_CNT_INT_EN; - writel(ctl, kbc->mmio + KBC_CONTROL_0); + tegra_kbc_set_fifo_interrupt(kbc, true); } return IRQ_HANDLED; @@ -734,18 +743,30 @@ static int tegra_kbc_suspend(struct device *dev) struct platform_device *pdev = to_platform_device(dev); struct tegra_kbc *kbc = platform_get_drvdata(pdev); + mutex_lock(&kbc->idev->mutex); if (device_may_wakeup(&pdev->dev)) { - tegra_kbc_setup_wakekeys(kbc, true); - enable_irq_wake(kbc->irq); + disable_irq(kbc->irq); + del_timer_sync(&kbc->timer); + tegra_kbc_set_fifo_interrupt(kbc, false); + /* Forcefully clear the interrupt status */ writel(0x7, kbc->mmio + KBC_INT_0); + /* + * Store the previous resident time of continuous polling mode. + * Force the keyboard into interrupt mode. + */ + kbc->cp_to_wkup_dly = readl(kbc->mmio + KBC_TO_CNT_0); + writel(0, kbc->mmio + KBC_TO_CNT_0); + + tegra_kbc_setup_wakekeys(kbc, true); msleep(30); + + enable_irq_wake(kbc->irq); } else { - mutex_lock(&kbc->idev->mutex); if (kbc->idev->users) tegra_kbc_stop(kbc); - mutex_unlock(&kbc->idev->mutex); } + mutex_unlock(&kbc->idev->mutex); return 0; } @@ -756,15 +777,22 @@ static int tegra_kbc_resume(struct device *dev) struct tegra_kbc *kbc = platform_get_drvdata(pdev); int err = 0; + mutex_lock(&kbc->idev->mutex); if (device_may_wakeup(&pdev->dev)) { disable_irq_wake(kbc->irq); tegra_kbc_setup_wakekeys(kbc, false); + + /* Restore the resident time of continuous polling mode. */ + writel(kbc->cp_to_wkup_dly, kbc->mmio + KBC_TO_CNT_0); + + tegra_kbc_set_fifo_interrupt(kbc, true); + + enable_irq(kbc->irq); } else { - mutex_lock(&kbc->idev->mutex); if (kbc->idev->users) err = tegra_kbc_start(kbc); - mutex_unlock(&kbc->idev->mutex); } + mutex_unlock(&kbc->idev->mutex); return err; } -- cgit v1.2.3-70-g09d2 From 95439cbad134de58d9ea256e37fd13fbcdc87d08 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 9 Sep 2011 09:24:20 -0700 Subject: Input: tegra-kbc - tighten locking Take spinlock when entering ISR and timer routine to ensure that we do not race while enabling/disabling FIFO interrupts. Also we do not need to take teh spinlock in tegra_kbc_startremove() since interrupt is completely disabled. Tested-by: Rakesh Iyer Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/tegra-kbc.c | 31 ++++++++++++------------------- 1 file changed, 12 insertions(+), 19 deletions(-) (limited to 'drivers/input/keyboard') diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c index 8fb474f0394..cf3228b0ab9 100644 --- a/drivers/input/keyboard/tegra-kbc.c +++ b/drivers/input/keyboard/tegra-kbc.c @@ -260,12 +260,10 @@ static void tegra_kbc_report_keys(struct tegra_kbc *kbc) u32 val = 0; unsigned int i; unsigned int num_down = 0; - unsigned long flags; bool fn_keypress = false; bool key_in_same_row = false; bool key_in_same_col = false; - spin_lock_irqsave(&kbc->lock, flags); for (i = 0; i < KBC_MAX_KPENT; i++) { if ((i % 4) == 0) val = readl(kbc->mmio + KBC_KP_ENT0_0 + i); @@ -294,7 +292,7 @@ static void tegra_kbc_report_keys(struct tegra_kbc *kbc) * any 2 of the 3 keys share a row, and any 2 of them share a column. * If so ignore the key presses for this iteration. */ - if ((kbc->use_ghost_filter) && (num_down >= 3)) { + if (kbc->use_ghost_filter && num_down >= 3) { for (i = 0; i < num_down; i++) { unsigned int j; u8 curr_col = scancodes[i] & 0x07; @@ -327,8 +325,6 @@ static void tegra_kbc_report_keys(struct tegra_kbc *kbc) } } - spin_unlock_irqrestore(&kbc->lock, flags); - /* Ignore the key presses for this iteration? */ if (key_in_same_col && key_in_same_row) return; @@ -362,6 +358,8 @@ static void tegra_kbc_keypress_timer(unsigned long data) u32 val; unsigned int i; + spin_lock_irqsave(&kbc->lock, flags); + val = (readl(kbc->mmio + KBC_INT_0) >> 4) & 0xf; if (val) { unsigned long dly; @@ -383,22 +381,19 @@ static void tegra_kbc_keypress_timer(unsigned long data) kbc->num_pressed_keys = 0; /* All keys are released so enable the keypress interrupt */ - spin_lock_irqsave(&kbc->lock, flags); tegra_kbc_set_fifo_interrupt(kbc, true); - spin_unlock_irqrestore(&kbc->lock, flags); } + + spin_unlock_irqrestore(&kbc->lock, flags); } static irqreturn_t tegra_kbc_isr(int irq, void *args) { struct tegra_kbc *kbc = args; + unsigned long flags; u32 val; - /* - * Until all keys are released, defer further processing to - * the polling loop in tegra_kbc_keypress_timer - */ - tegra_kbc_set_fifo_interrupt(kbc, false); + spin_lock_irqsave(&kbc->lock, flags); /* * Quickly bail out & reenable interrupts if the fifo threshold @@ -409,14 +404,15 @@ static irqreturn_t tegra_kbc_isr(int irq, void *args) if (val & KBC_INT_FIFO_CNT_INT_STATUS) { /* - * Schedule timer to run when hardware is in continuous - * polling mode. + * Until all keys are released, defer further processing to + * the polling loop in tegra_kbc_keypress_timer. */ + tegra_kbc_set_fifo_interrupt(kbc, false); mod_timer(&kbc->timer, jiffies + kbc->cp_dly_jiffies); - } else { - tegra_kbc_set_fifo_interrupt(kbc, true); } + spin_unlock_irqrestore(&kbc->lock, flags); + return IRQ_HANDLED; } @@ -464,7 +460,6 @@ static void tegra_kbc_config_pins(struct tegra_kbc *kbc) static int tegra_kbc_start(struct tegra_kbc *kbc) { const struct tegra_kbc_platform_data *pdata = kbc->pdata; - unsigned long flags; unsigned int debounce_cnt; u32 val = 0; @@ -502,7 +497,6 @@ static int tegra_kbc_start(struct tegra_kbc *kbc) * Atomically clear out any remaining entries in the key FIFO * and enable keyboard interrupts. */ - spin_lock_irqsave(&kbc->lock, flags); while (1) { val = readl(kbc->mmio + KBC_INT_0); val >>= 4; @@ -513,7 +507,6 @@ static int tegra_kbc_start(struct tegra_kbc *kbc) val = readl(kbc->mmio + KBC_KP_ENT1_0); } writel(0x7, kbc->mmio + KBC_INT_0); - spin_unlock_irqrestore(&kbc->lock, flags); enable_irq(kbc->irq); -- cgit v1.2.3-70-g09d2 From cca84699a079a91b0a0cb4f2da8548e56859376a Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Fri, 9 Sep 2011 11:09:50 -0700 Subject: Input: gpio_keys - use of_property_read_u32() Use the of_property_read_u32() helper function to retrieve u32 values from the device tree. Also do not pass the len parameter to of_get_property if it isn't checked afterwards. Signed-off-by: Tobias Klauser Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/gpio_keys.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) (limited to 'drivers/input/keyboard') diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index 67df91af842..ed1ed469d08 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -461,8 +461,7 @@ static int gpio_keys_get_devtree_pdata(struct device *dev, struct device_node *node, *pp; int i; struct gpio_keys_button *buttons; - const u32 *reg; - int len; + u32 reg; node = dev->of_node; if (node == NULL) @@ -470,7 +469,7 @@ static int gpio_keys_get_devtree_pdata(struct device *dev, memset(pdata, 0, sizeof *pdata); - pdata->rep = !!of_get_property(node, "autorepeat", &len); + pdata->rep = !!of_get_property(node, "autorepeat", NULL); /* First count the subnodes */ pdata->nbuttons = 0; @@ -498,22 +497,25 @@ static int gpio_keys_get_devtree_pdata(struct device *dev, buttons[i].gpio = of_get_gpio_flags(pp, 0, &flags); buttons[i].active_low = flags & OF_GPIO_ACTIVE_LOW; - reg = of_get_property(pp, "linux,code", &len); - if (!reg) { + if (of_property_read_u32(pp, "linux,code", ®)) { dev_err(dev, "Button without keycode: 0x%x\n", buttons[i].gpio); goto out_fail; } - buttons[i].code = be32_to_cpup(reg); + buttons[i].code = reg; - buttons[i].desc = of_get_property(pp, "label", &len); + buttons[i].desc = of_get_property(pp, "label", NULL); - reg = of_get_property(pp, "linux,input-type", &len); - buttons[i].type = reg ? be32_to_cpup(reg) : EV_KEY; + if (of_property_read_u32(pp, "linux,input-type", ®) == 0) + buttons[i].type = reg; + else + buttons[i].type = EV_KEY; buttons[i].wakeup = !!of_get_property(pp, "gpio-key,wakeup", NULL); - reg = of_get_property(pp, "debounce-interval", &len); - buttons[i].debounce_interval = reg ? be32_to_cpup(reg) : 5; + if (of_property_read_u32(pp, "debounce-interval", ®) == 0) + buttons[i].debounce_interval = reg; + else + buttons[i].debounce_interval = 5; i++; } -- cgit v1.2.3-70-g09d2 From f80aee7fd095d9014a92a250c688ff5dbc0a6649 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 6 Oct 2011 15:26:52 -0700 Subject: Input: lm8323 - wrap suspend and resume in CONFIG_PM_SLEEP CONFIG_PM is defined when CONFIG_PM_SLEEP or CONFIG_PM_RUNTIME is defined, however suspend and resume methods are only valid in the context of CONFIG_PM_SLEEP. If only CONFIG_PM_RUNTIME is defined we get the following warning (courtesy of Geerts randconfig builds): lm8323.c: warning: 'lm8323_resume' defined but not used Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/lm8323.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/input/keyboard') diff --git a/drivers/input/keyboard/lm8323.c b/drivers/input/keyboard/lm8323.c index 756348a7f93..82d1dc8badd 100644 --- a/drivers/input/keyboard/lm8323.c +++ b/drivers/input/keyboard/lm8323.c @@ -788,7 +788,7 @@ static int __devexit lm8323_remove(struct i2c_client *client) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP /* * We don't need to explicitly suspend the chip, as it already switches off * when there's no activity. -- cgit v1.2.3-70-g09d2 From 81e8f2bc82cd591a749c0cc5694f57676db749ae Mon Sep 17 00:00:00 2001 From: Hui Wang Date: Wed, 12 Oct 2011 21:11:16 -0700 Subject: Input: imx_keypad - add pm suspend and resume support The imx_keypad driver was indicating that it was wakeup capable in imx_keypad_probe(), but it didn't implement suspend or resume methods. According to the i.MX series MCU Reference Manual, the kpp (keypad port) is a major wake up source which can detect any key press even in low power mode and even when there is no clock. Signed-off-by: Hui Wang Reviewed-by: Wanlong Gao Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/imx_keypad.c | 44 +++++++++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) (limited to 'drivers/input/keyboard') diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c index 4b093faf578..ccebd2d0915 100644 --- a/drivers/input/keyboard/imx_keypad.c +++ b/drivers/input/keyboard/imx_keypad.c @@ -567,10 +567,54 @@ static int __devexit imx_keypad_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM_SLEEP +static int imx_kbd_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct imx_keypad *kbd = platform_get_drvdata(pdev); + struct input_dev *input_dev = kbd->input_dev; + + /* imx kbd can wake up system even clock is disabled */ + mutex_lock(&input_dev->mutex); + + if (input_dev->users) + clk_disable(kbd->clk); + + mutex_unlock(&input_dev->mutex); + + if (device_may_wakeup(&pdev->dev)) + enable_irq_wake(kbd->irq); + + return 0; +} + +static int imx_kbd_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct imx_keypad *kbd = platform_get_drvdata(pdev); + struct input_dev *input_dev = kbd->input_dev; + + if (device_may_wakeup(&pdev->dev)) + disable_irq_wake(kbd->irq); + + mutex_lock(&input_dev->mutex); + + if (input_dev->users) + clk_enable(kbd->clk); + + mutex_unlock(&input_dev->mutex); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(imx_kbd_pm_ops, imx_kbd_suspend, imx_kbd_resume); + static struct platform_driver imx_keypad_driver = { .driver = { .name = "imx-keypad", .owner = THIS_MODULE, + .pm = &imx_kbd_pm_ops, }, .probe = imx_keypad_probe, .remove = __devexit_p(imx_keypad_remove), -- cgit v1.2.3-70-g09d2 From 3f48e7354358519e5b93f7f755ec270b3f8eafa0 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 18 Oct 2011 21:12:39 -0700 Subject: Input: adp5589-keys - add support for the ADP5585 derivatives The ADP5585 family keypad decoder and IO expander is similar to the ADP5589, however it features less IO pins, and lacks hardware assisted key-lock functionality. Unfortunately the register addresses are different, as well as the event codes and bit organization within the port related registers. Move ADP5589 Register defines from the header file into the main source file. Add new defines while making sure we don't break existing platform_data. Add register address translation, and turn device specific defines into variables. Introduce some helper functions and disable functions that doesn't exist on the added devices. Signed-off-by: Michael Hennerich Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/Kconfig | 4 +- drivers/input/keyboard/adp5589-keys.c | 609 +++++++++++++++++++++++++++------- include/linux/input/adp5589.h | 157 ++++----- 3 files changed, 550 insertions(+), 220 deletions(-) (limited to 'drivers/input/keyboard') diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index b4dee9d5a05..615c21f2a55 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -33,10 +33,10 @@ config KEYBOARD_ADP5588 module will be called adp5588-keys. config KEYBOARD_ADP5589 - tristate "ADP5589 I2C QWERTY Keypad and IO Expander" + tristate "ADP5585/ADP5589 I2C QWERTY Keypad and IO Expander" depends on I2C help - Say Y here if you want to use a ADP5589 attached to your + Say Y here if you want to use a ADP5585/ADP5589 attached to your system I2C bus. To compile this driver as a module, choose M here: the diff --git a/drivers/input/keyboard/adp5589-keys.c b/drivers/input/keyboard/adp5589-keys.c index c7708263051..02b5d53031b 100644 --- a/drivers/input/keyboard/adp5589-keys.c +++ b/drivers/input/keyboard/adp5589-keys.c @@ -1,5 +1,5 @@ /* - * Description: keypad driver for ADP5589 + * Description: keypad driver for ADP5589, ADP5585 * I2C QWERTY Keypad and IO Expander * Bugs: Enter bugs at http://blackfin.uclinux.org/ * @@ -22,35 +22,165 @@ #include +/* ADP5589/ADP5585 Common Registers */ +#define ADP5589_5_ID 0x00 +#define ADP5589_5_INT_STATUS 0x01 +#define ADP5589_5_STATUS 0x02 +#define ADP5589_5_FIFO_1 0x03 +#define ADP5589_5_FIFO_2 0x04 +#define ADP5589_5_FIFO_3 0x05 +#define ADP5589_5_FIFO_4 0x06 +#define ADP5589_5_FIFO_5 0x07 +#define ADP5589_5_FIFO_6 0x08 +#define ADP5589_5_FIFO_7 0x09 +#define ADP5589_5_FIFO_8 0x0A +#define ADP5589_5_FIFO_9 0x0B +#define ADP5589_5_FIFO_10 0x0C +#define ADP5589_5_FIFO_11 0x0D +#define ADP5589_5_FIFO_12 0x0E +#define ADP5589_5_FIFO_13 0x0F +#define ADP5589_5_FIFO_14 0x10 +#define ADP5589_5_FIFO_15 0x11 +#define ADP5589_5_FIFO_16 0x12 +#define ADP5589_5_GPI_INT_STAT_A 0x13 +#define ADP5589_5_GPI_INT_STAT_B 0x14 + +/* ADP5589 Registers */ +#define ADP5589_GPI_INT_STAT_C 0x15 +#define ADP5589_GPI_STATUS_A 0x16 +#define ADP5589_GPI_STATUS_B 0x17 +#define ADP5589_GPI_STATUS_C 0x18 +#define ADP5589_RPULL_CONFIG_A 0x19 +#define ADP5589_RPULL_CONFIG_B 0x1A +#define ADP5589_RPULL_CONFIG_C 0x1B +#define ADP5589_RPULL_CONFIG_D 0x1C +#define ADP5589_RPULL_CONFIG_E 0x1D +#define ADP5589_GPI_INT_LEVEL_A 0x1E +#define ADP5589_GPI_INT_LEVEL_B 0x1F +#define ADP5589_GPI_INT_LEVEL_C 0x20 +#define ADP5589_GPI_EVENT_EN_A 0x21 +#define ADP5589_GPI_EVENT_EN_B 0x22 +#define ADP5589_GPI_EVENT_EN_C 0x23 +#define ADP5589_GPI_INTERRUPT_EN_A 0x24 +#define ADP5589_GPI_INTERRUPT_EN_B 0x25 +#define ADP5589_GPI_INTERRUPT_EN_C 0x26 +#define ADP5589_DEBOUNCE_DIS_A 0x27 +#define ADP5589_DEBOUNCE_DIS_B 0x28 +#define ADP5589_DEBOUNCE_DIS_C 0x29 +#define ADP5589_GPO_DATA_OUT_A 0x2A +#define ADP5589_GPO_DATA_OUT_B 0x2B +#define ADP5589_GPO_DATA_OUT_C 0x2C +#define ADP5589_GPO_OUT_MODE_A 0x2D +#define ADP5589_GPO_OUT_MODE_B 0x2E +#define ADP5589_GPO_OUT_MODE_C 0x2F +#define ADP5589_GPIO_DIRECTION_A 0x30 +#define ADP5589_GPIO_DIRECTION_B 0x31 +#define ADP5589_GPIO_DIRECTION_C 0x32 +#define ADP5589_UNLOCK1 0x33 +#define ADP5589_UNLOCK2 0x34 +#define ADP5589_EXT_LOCK_EVENT 0x35 +#define ADP5589_UNLOCK_TIMERS 0x36 +#define ADP5589_LOCK_CFG 0x37 +#define ADP5589_RESET1_EVENT_A 0x38 +#define ADP5589_RESET1_EVENT_B 0x39 +#define ADP5589_RESET1_EVENT_C 0x3A +#define ADP5589_RESET2_EVENT_A 0x3B +#define ADP5589_RESET2_EVENT_B 0x3C +#define ADP5589_RESET_CFG 0x3D +#define ADP5589_PWM_OFFT_LOW 0x3E +#define ADP5589_PWM_OFFT_HIGH 0x3F +#define ADP5589_PWM_ONT_LOW 0x40 +#define ADP5589_PWM_ONT_HIGH 0x41 +#define ADP5589_PWM_CFG 0x42 +#define ADP5589_CLOCK_DIV_CFG 0x43 +#define ADP5589_LOGIC_1_CFG 0x44 +#define ADP5589_LOGIC_2_CFG 0x45 +#define ADP5589_LOGIC_FF_CFG 0x46 +#define ADP5589_LOGIC_INT_EVENT_EN 0x47 +#define ADP5589_POLL_PTIME_CFG 0x48 +#define ADP5589_PIN_CONFIG_A 0x49 +#define ADP5589_PIN_CONFIG_B 0x4A +#define ADP5589_PIN_CONFIG_C 0x4B +#define ADP5589_PIN_CONFIG_D 0x4C +#define ADP5589_GENERAL_CFG 0x4D +#define ADP5589_INT_EN 0x4E + +/* ADP5585 Registers */ +#define ADP5585_GPI_STATUS_A 0x15 +#define ADP5585_GPI_STATUS_B 0x16 +#define ADP5585_RPULL_CONFIG_A 0x17 +#define ADP5585_RPULL_CONFIG_B 0x18 +#define ADP5585_RPULL_CONFIG_C 0x19 +#define ADP5585_RPULL_CONFIG_D 0x1A +#define ADP5585_GPI_INT_LEVEL_A 0x1B +#define ADP5585_GPI_INT_LEVEL_B 0x1C +#define ADP5585_GPI_EVENT_EN_A 0x1D +#define ADP5585_GPI_EVENT_EN_B 0x1E +#define ADP5585_GPI_INTERRUPT_EN_A 0x1F +#define ADP5585_GPI_INTERRUPT_EN_B 0x20 +#define ADP5585_DEBOUNCE_DIS_A 0x21 +#define ADP5585_DEBOUNCE_DIS_B 0x22 +#define ADP5585_GPO_DATA_OUT_A 0x23 +#define ADP5585_GPO_DATA_OUT_B 0x24 +#define ADP5585_GPO_OUT_MODE_A 0x25 +#define ADP5585_GPO_OUT_MODE_B 0x26 +#define ADP5585_GPIO_DIRECTION_A 0x27 +#define ADP5585_GPIO_DIRECTION_B 0x28 +#define ADP5585_RESET1_EVENT_A 0x29 +#define ADP5585_RESET1_EVENT_B 0x2A +#define ADP5585_RESET1_EVENT_C 0x2B +#define ADP5585_RESET2_EVENT_A 0x2C +#define ADP5585_RESET2_EVENT_B 0x2D +#define ADP5585_RESET_CFG 0x2E +#define ADP5585_PWM_OFFT_LOW 0x2F +#define ADP5585_PWM_OFFT_HIGH 0x30 +#define ADP5585_PWM_ONT_LOW 0x31 +#define ADP5585_PWM_ONT_HIGH 0x32 +#define ADP5585_PWM_CFG 0x33 +#define ADP5585_LOGIC_CFG 0x34 +#define ADP5585_LOGIC_FF_CFG 0x35 +#define ADP5585_LOGIC_INT_EVENT_EN 0x36 +#define ADP5585_POLL_PTIME_CFG 0x37 +#define ADP5585_PIN_CONFIG_A 0x38 +#define ADP5585_PIN_CONFIG_B 0x39 +#define ADP5585_PIN_CONFIG_D 0x3A +#define ADP5585_GENERAL_CFG 0x3B +#define ADP5585_INT_EN 0x3C + +/* ID Register */ +#define ADP5589_5_DEVICE_ID_MASK 0xF +#define ADP5589_5_MAN_ID_MASK 0xF +#define ADP5589_5_MAN_ID_SHIFT 4 +#define ADP5589_5_MAN_ID 0x02 + /* GENERAL_CFG Register */ #define OSC_EN (1 << 7) #define CORE_CLK(x) (((x) & 0x3) << 5) -#define LCK_TRK_LOGIC (1 << 4) -#define LCK_TRK_GPI (1 << 3) +#define LCK_TRK_LOGIC (1 << 4) /* ADP5589 only */ +#define LCK_TRK_GPI (1 << 3) /* ADP5589 only */ #define INT_CFG (1 << 1) #define RST_CFG (1 << 0) /* INT_EN Register */ -#define LOGIC2_IEN (1 << 5) +#define LOGIC2_IEN (1 << 5) /* ADP5589 only */ #define LOGIC1_IEN (1 << 4) -#define LOCK_IEN (1 << 3) +#define LOCK_IEN (1 << 3) /* ADP5589 only */ #define OVRFLOW_IEN (1 << 2) #define GPI_IEN (1 << 1) #define EVENT_IEN (1 << 0) /* Interrupt Status Register */ -#define LOGIC2_INT (1 << 5) +#define LOGIC2_INT (1 << 5) /* ADP5589 only */ #define LOGIC1_INT (1 << 4) -#define LOCK_INT (1 << 3) +#define LOCK_INT (1 << 3) /* ADP5589 only */ #define OVRFLOW_INT (1 << 2) #define GPI_INT (1 << 1) #define EVENT_INT (1 << 0) /* STATUS Register */ - -#define LOGIC2_STAT (1 << 7) +#define LOGIC2_STAT (1 << 7) /* ADP5589 only */ #define LOGIC1_STAT (1 << 6) -#define LOCK_STAT (1 << 5) +#define LOCK_STAT (1 << 5) /* ADP5589 only */ #define KEC 0xF /* PIN_CONFIG_D Register */ @@ -61,27 +191,54 @@ #define LOCK_EN (1 << 0) #define PTIME_MASK 0x3 -#define LTIME_MASK 0x3 +#define LTIME_MASK 0x3 /* ADP5589 only */ /* Key Event Register xy */ #define KEY_EV_PRESSED (1 << 7) #define KEY_EV_MASK (0x7F) #define KEYP_MAX_EVENT 16 +#define ADP5589_MAXGPIO 19 +#define ADP5585_MAXGPIO 11 /* 10 on the ADP5585-01, 11 on ADP5585-02 */ -#define MAXGPIO 19 -#define ADP_BANK(offs) ((offs) >> 3) -#define ADP_BIT(offs) (1u << ((offs) & 0x7)) +enum { + ADP5589, + ADP5585_01, + ADP5585_02 +}; + +struct adp_constants { + u8 maxgpio; + u8 keymapsize; + u8 gpi_pin_row_base; + u8 gpi_pin_row_end; + u8 gpi_pin_col_base; + u8 gpi_pin_base; + u8 gpi_pin_end; + u8 gpimapsize_max; + u8 max_row_num; + u8 max_col_num; + u8 row_mask; + u8 col_mask; + u8 col_shift; + u8 c4_extend_cfg; + u8 (*bank) (u8 offset); + u8 (*bit) (u8 offset); + u8 (*reg) (u8 reg); +}; struct adp5589_kpad { struct i2c_client *client; struct input_dev *input; + const struct adp_constants *var; unsigned short keycode[ADP5589_KEYMAPSIZE]; const struct adp5589_gpi_map *gpimap; unsigned short gpimapsize; unsigned extend_cfg; + bool is_adp5585; + bool adp5585_support_row5; #ifdef CONFIG_GPIOLIB - unsigned char gpiomap[MAXGPIO]; + unsigned char gpiomap[ADP5589_MAXGPIO]; bool export_gpio; struct gpio_chip gc; struct mutex gpio_lock; /* Protect cached dir, dat_out */ @@ -90,6 +247,129 @@ struct adp5589_kpad { #endif }; +/* + * ADP5589 / ADP5585 derivative / variant handling + */ + + +/* ADP5589 */ + +static unsigned char adp5589_bank(unsigned char offset) +{ + return offset >> 3; +} + +static unsigned char adp5589_bit(unsigned char offset) +{ + return 1u << (offset & 0x7); +} + +static unsigned char adp5589_reg(unsigned char reg) +{ + return reg; +} + +static const struct adp_constants const_adp5589 = { + .maxgpio = ADP5589_MAXGPIO, + .keymapsize = ADP5589_KEYMAPSIZE, + .gpi_pin_row_base = ADP5589_GPI_PIN_ROW_BASE, + .gpi_pin_row_end = ADP5589_GPI_PIN_ROW_END, + .gpi_pin_col_base = ADP5589_GPI_PIN_COL_BASE, + .gpi_pin_base = ADP5589_GPI_PIN_BASE, + .gpi_pin_end = ADP5589_GPI_PIN_END, + .gpimapsize_max = ADP5589_GPIMAPSIZE_MAX, + .c4_extend_cfg = 12, + .max_row_num = ADP5589_MAX_ROW_NUM, + .max_col_num = ADP5589_MAX_COL_NUM, + .row_mask = ADP5589_ROW_MASK, + .col_mask = ADP5589_COL_MASK, + .col_shift = ADP5589_COL_SHIFT, + .bank = adp5589_bank, + .bit = adp5589_bit, + .reg = adp5589_reg, +}; + +/* ADP5585 */ + +static unsigned char adp5585_bank(unsigned char offset) +{ + return offset > ADP5585_MAX_ROW_NUM; +} + +static unsigned char adp5585_bit(unsigned char offset) +{ + return (offset > ADP5585_MAX_ROW_NUM) ? + 1u << (offset - ADP5585_COL_SHIFT) : 1u << offset; +} + +static const unsigned char adp5585_reg_lut[] = { + [ADP5589_GPI_STATUS_A] = ADP5585_GPI_STATUS_A, + [ADP5589_GPI_STATUS_B] = ADP5585_GPI_STATUS_B, + [ADP5589_RPULL_CONFIG_A] = ADP5585_RPULL_CONFIG_A, + [ADP5589_RPULL_CONFIG_B] = ADP5585_RPULL_CONFIG_B, + [ADP5589_RPULL_CONFIG_C] = ADP5585_RPULL_CONFIG_C, + [ADP5589_RPULL_CONFIG_D] = ADP5585_RPULL_CONFIG_D, + [ADP5589_GPI_INT_LEVEL_A] = ADP5585_GPI_INT_LEVEL_A, + [ADP5589_GPI_INT_LEVEL_B] = ADP5585_GPI_INT_LEVEL_B, + [ADP5589_GPI_EVENT_EN_A] = ADP5585_GPI_EVENT_EN_A, + [ADP5589_GPI_EVENT_EN_B] = ADP5585_GPI_EVENT_EN_B, + [ADP5589_GPI_INTERRUPT_EN_A] = ADP5585_GPI_INTERRUPT_EN_A, + [ADP5589_GPI_INTERRUPT_EN_B] = ADP5585_GPI_INTERRUPT_EN_B, + [ADP5589_DEBOUNCE_DIS_A] = ADP5585_DEBOUNCE_DIS_A, + [ADP5589_DEBOUNCE_DIS_B] = ADP5585_DEBOUNCE_DIS_B, + [ADP5589_GPO_DATA_OUT_A] = ADP5585_GPO_DATA_OUT_A, + [ADP5589_GPO_DATA_OUT_B] = ADP5585_GPO_DATA_OUT_B, + [ADP5589_GPO_OUT_MODE_A] = ADP5585_GPO_OUT_MODE_A, + [ADP5589_GPO_OUT_MODE_B] = ADP5585_GPO_OUT_MODE_B, + [ADP5589_GPIO_DIRECTION_A] = ADP5585_GPIO_DIRECTION_A, + [ADP5589_GPIO_DIRECTION_B] = ADP5585_GPIO_DIRECTION_B, + [ADP5589_RESET1_EVENT_A] = ADP5585_RESET1_EVENT_A, + [ADP5589_RESET1_EVENT_B] = ADP5585_RESET1_EVENT_B, + [ADP5589_RESET1_EVENT_C] = ADP5585_RESET1_EVENT_C, + [ADP5589_RESET2_EVENT_A] = ADP5585_RESET2_EVENT_A, + [ADP5589_RESET2_EVENT_B] = ADP5585_RESET2_EVENT_B, + [ADP5589_RESET_CFG] = ADP5585_RESET_CFG, + [ADP5589_PWM_OFFT_LOW] = ADP5585_PWM_OFFT_LOW, + [ADP5589_PWM_OFFT_HIGH] = ADP5585_PWM_OFFT_HIGH, + [ADP5589_PWM_ONT_LOW] = ADP5585_PWM_ONT_LOW, + [ADP5589_PWM_ONT_HIGH] = ADP5585_PWM_ONT_HIGH, + [ADP5589_PWM_CFG] = ADP5585_PWM_CFG, + [ADP5589_LOGIC_1_CFG] = ADP5585_LOGIC_CFG, + [ADP5589_LOGIC_FF_CFG] = ADP5585_LOGIC_FF_CFG, + [ADP5589_LOGIC_INT_EVENT_EN] = ADP5585_LOGIC_INT_EVENT_EN, + [ADP5589_POLL_PTIME_CFG] = ADP5585_POLL_PTIME_CFG, + [ADP5589_PIN_CONFIG_A] = ADP5585_PIN_CONFIG_A, + [ADP5589_PIN_CONFIG_B] = ADP5585_PIN_CONFIG_B, + [ADP5589_PIN_CONFIG_D] = ADP5585_PIN_CONFIG_D, + [ADP5589_GENERAL_CFG] = ADP5585_GENERAL_CFG, + [ADP5589_INT_EN] = ADP5585_INT_EN, +}; + +static unsigned char adp5585_reg(unsigned char reg) +{ + return adp5585_reg_lut[reg]; +} + +static const struct adp_constants const_adp5585 = { + .maxgpio = ADP5585_MAXGPIO, + .keymapsize = ADP5585_KEYMAPSIZE, + .gpi_pin_row_base = ADP5585_GPI_PIN_ROW_BASE, + .gpi_pin_row_end = ADP5585_GPI_PIN_ROW_END, + .gpi_pin_col_base = ADP5585_GPI_PIN_COL_BASE, + .gpi_pin_base = ADP5585_GPI_PIN_BASE, + .gpi_pin_end = ADP5585_GPI_PIN_END, + .gpimapsize_max = ADP5585_GPIMAPSIZE_MAX, + .c4_extend_cfg = 10, + .max_row_num = ADP5585_MAX_ROW_NUM, + .max_col_num = ADP5585_MAX_COL_NUM, + .row_mask = ADP5585_ROW_MASK, + .col_mask = ADP5585_COL_MASK, + .col_shift = ADP5585_COL_SHIFT, + .bank = adp5585_bank, + .bit = adp5585_bit, + .reg = adp5585_reg, +}; + static int adp5589_read(struct i2c_client *client, u8 reg) { int ret = i2c_smbus_read_byte_data(client, reg); @@ -109,19 +389,20 @@ static int adp5589_write(struct i2c_client *client, u8 reg, u8 val) static int adp5589_gpio_get_value(struct gpio_chip *chip, unsigned off) { struct adp5589_kpad *kpad = container_of(chip, struct adp5589_kpad, gc); - unsigned int bank = ADP_BANK(kpad->gpiomap[off]); - unsigned int bit = ADP_BIT(kpad->gpiomap[off]); + unsigned int bank = kpad->var->bank(kpad->gpiomap[off]); + unsigned int bit = kpad->var->bit(kpad->gpiomap[off]); - return !!(adp5589_read(kpad->client, ADP5589_GPI_STATUS_A + bank) & - bit); + return !!(adp5589_read(kpad->client, + kpad->var->reg(ADP5589_GPI_STATUS_A) + bank) & + bit); } static void adp5589_gpio_set_value(struct gpio_chip *chip, unsigned off, int val) { struct adp5589_kpad *kpad = container_of(chip, struct adp5589_kpad, gc); - unsigned int bank = ADP_BANK(kpad->gpiomap[off]); - unsigned int bit = ADP_BIT(kpad->gpiomap[off]); + unsigned int bank = kpad->var->bank(kpad->gpiomap[off]); + unsigned int bit = kpad->var->bit(kpad->gpiomap[off]); mutex_lock(&kpad->gpio_lock); @@ -130,8 +411,8 @@ static void adp5589_gpio_set_value(struct gpio_chip *chip, else kpad->dat_out[bank] &= ~bit; - adp5589_write(kpad->client, ADP5589_GPO_DATA_OUT_A + bank, - kpad->dat_out[bank]); + adp5589_write(kpad->client, kpad->var->reg(ADP5589_GPO_DATA_OUT_A) + + bank, kpad->dat_out[bank]); mutex_unlock(&kpad->gpio_lock); } @@ -139,14 +420,15 @@ static void adp5589_gpio_set_value(struct gpio_chip *chip, static int adp5589_gpio_direction_input(struct gpio_chip *chip, unsigned off) { struct adp5589_kpad *kpad = container_of(chip, struct adp5589_kpad, gc); - unsigned int bank = ADP_BANK(kpad->gpiomap[off]); - unsigned int bit = ADP_BIT(kpad->gpiomap[off]); + unsigned int bank = kpad->var->bank(kpad->gpiomap[off]); + unsigned int bit = kpad->var->bit(kpad->gpiomap[off]); int ret; mutex_lock(&kpad->gpio_lock); kpad->dir[bank] &= ~bit; - ret = adp5589_write(kpad->client, ADP5589_GPIO_DIRECTION_A + bank, + ret = adp5589_write(kpad->client, + kpad->var->reg(ADP5589_GPIO_DIRECTION_A) + bank, kpad->dir[bank]); mutex_unlock(&kpad->gpio_lock); @@ -158,8 +440,8 @@ static int adp5589_gpio_direction_output(struct gpio_chip *chip, unsigned off, int val) { struct adp5589_kpad *kpad = container_of(chip, struct adp5589_kpad, gc); - unsigned int bank = ADP_BANK(kpad->gpiomap[off]); - unsigned int bit = ADP_BIT(kpad->gpiomap[off]); + unsigned int bank = kpad->var->bank(kpad->gpiomap[off]); + unsigned int bit = kpad->var->bit(kpad->gpiomap[off]); int ret; mutex_lock(&kpad->gpio_lock); @@ -171,9 +453,10 @@ static int adp5589_gpio_direction_output(struct gpio_chip *chip, else kpad->dat_out[bank] &= ~bit; - ret = adp5589_write(kpad->client, ADP5589_GPO_DATA_OUT_A + bank, - kpad->dat_out[bank]); - ret |= adp5589_write(kpad->client, ADP5589_GPIO_DIRECTION_A + bank, + ret = adp5589_write(kpad->client, kpad->var->reg(ADP5589_GPO_DATA_OUT_A) + + bank, kpad->dat_out[bank]); + ret |= adp5589_write(kpad->client, + kpad->var->reg(ADP5589_GPIO_DIRECTION_A) + bank, kpad->dir[bank]); mutex_unlock(&kpad->gpio_lock); @@ -184,26 +467,29 @@ static int adp5589_gpio_direction_output(struct gpio_chip *chip, static int __devinit adp5589_build_gpiomap(struct adp5589_kpad *kpad, const struct adp5589_kpad_platform_data *pdata) { - bool pin_used[MAXGPIO]; + bool pin_used[ADP5589_MAXGPIO]; int n_unused = 0; int i; memset(pin_used, false, sizeof(pin_used)); - for (i = 0; i < MAXGPIO; i++) + for (i = 0; i < kpad->var->maxgpio; i++) if (pdata->keypad_en_mask & (1 << i)) pin_used[i] = true; for (i = 0; i < kpad->gpimapsize; i++) - pin_used[kpad->gpimap[i].pin - ADP5589_GPI_PIN_BASE] = true; + pin_used[kpad->gpimap[i].pin - kpad->var->gpi_pin_base] = true; if (kpad->extend_cfg & R4_EXTEND_CFG) pin_used[4] = true; if (kpad->extend_cfg & C4_EXTEND_CFG) - pin_used[12] = true; + pin_used[kpad->var->c4_extend_cfg] = true; + + if (!kpad->adp5585_support_row5) + pin_used[5] = true; - for (i = 0; i < MAXGPIO; i++) + for (i = 0; i < kpad->var->maxgpio; i++) if (!pin_used[i]) kpad->gpiomap[n_unused++] = i; @@ -246,11 +532,11 @@ static int __devinit adp5589_gpio_add(struct adp5589_kpad *kpad) return error; } - for (i = 0; i <= ADP_BANK(MAXGPIO); i++) { - kpad->dat_out[i] = adp5589_read(kpad->client, - ADP5589_GPO_DATA_OUT_A + i); - kpad->dir[i] = adp5589_read(kpad->client, - ADP5589_GPIO_DIRECTION_A + i); + for (i = 0; i <= kpad->var->bank(kpad->var->maxgpio); i++) { + kpad->dat_out[i] = adp5589_read(kpad->client, kpad->var->reg( + ADP5589_GPO_DATA_OUT_A) + i); + kpad->dir[i] = adp5589_read(kpad->client, kpad->var->reg( + ADP5589_GPIO_DIRECTION_A) + i); } if (gpio_data->setup) { @@ -317,11 +603,11 @@ static void adp5589_report_events(struct adp5589_kpad *kpad, int ev_cnt) int i; for (i = 0; i < ev_cnt; i++) { - int key = adp5589_read(kpad->client, ADP5589_FIFO_1 + i); + int key = adp5589_read(kpad->client, ADP5589_5_FIFO_1 + i); int key_val = key & KEY_EV_MASK; - if (key_val >= ADP5589_GPI_PIN_BASE && - key_val <= ADP5589_GPI_PIN_END) { + if (key_val >= kpad->var->gpi_pin_base && + key_val <= kpad->var->gpi_pin_end) { adp5589_report_switches(kpad, key, key_val); } else { input_report_key(kpad->input, @@ -337,29 +623,30 @@ static irqreturn_t adp5589_irq(int irq, void *handle) struct i2c_client *client = kpad->client; int status, ev_cnt; - status = adp5589_read(client, ADP5589_INT_STATUS); + status = adp5589_read(client, ADP5589_5_INT_STATUS); if (status & OVRFLOW_INT) /* Unlikely and should never happen */ dev_err(&client->dev, "Event Overflow Error\n"); if (status & EVENT_INT) { - ev_cnt = adp5589_read(client, ADP5589_STATUS) & KEC; + ev_cnt = adp5589_read(client, ADP5589_5_STATUS) & KEC; if (ev_cnt) { adp5589_report_events(kpad, ev_cnt); input_sync(kpad->input); } } - adp5589_write(client, ADP5589_INT_STATUS, status); /* Status is W1C */ + adp5589_write(client, ADP5589_5_INT_STATUS, status); /* Status is W1C */ return IRQ_HANDLED; } -static int __devinit adp5589_get_evcode(struct adp5589_kpad *kpad, unsigned short key) +static int __devinit adp5589_get_evcode(struct adp5589_kpad *kpad, + unsigned short key) { int i; - for (i = 0; i < ADP5589_KEYMAPSIZE; i++) + for (i = 0; i < kpad->var->keymapsize; i++) if (key == kpad->keycode[i]) return (i + 1) | KEY_EV_PRESSED; @@ -372,19 +659,23 @@ static int __devinit adp5589_setup(struct adp5589_kpad *kpad) { struct i2c_client *client = kpad->client; const struct adp5589_kpad_platform_data *pdata = - client->dev.platform_data; - int i, ret; + client->dev.platform_data; + u8 (*reg) (u8) = kpad->var->reg; unsigned char evt_mode1 = 0, evt_mode2 = 0, evt_mode3 = 0; unsigned char pull_mask = 0; + int i, ret; + + ret = adp5589_write(client, reg(ADP5589_PIN_CONFIG_A), + pdata->keypad_en_mask & kpad->var->row_mask); + ret |= adp5589_write(client, reg(ADP5589_PIN_CONFIG_B), + (pdata->keypad_en_mask >> kpad->var->col_shift) & + kpad->var->col_mask); - ret = adp5589_write(client, ADP5589_PIN_CONFIG_A, - pdata->keypad_en_mask & 0xFF); - ret |= adp5589_write(client, ADP5589_PIN_CONFIG_B, - (pdata->keypad_en_mask >> 8) & 0xFF); - ret |= adp5589_write(client, ADP5589_PIN_CONFIG_C, - (pdata->keypad_en_mask >> 16) & 0xFF); + if (!kpad->is_adp5585) + ret |= adp5589_write(client, ADP5589_PIN_CONFIG_C, + (pdata->keypad_en_mask >> 16) & 0xFF); - if (pdata->en_keylock) { + if (!kpad->is_adp5585 && pdata->en_keylock) { ret |= adp5589_write(client, ADP5589_UNLOCK1, pdata->unlock_key1); ret |= adp5589_write(client, ADP5589_UNLOCK2, @@ -395,96 +686,130 @@ static int __devinit adp5589_setup(struct adp5589_kpad *kpad) } for (i = 0; i < KEYP_MAX_EVENT; i++) - ret |= adp5589_read(client, ADP5589_FIFO_1 + i); + ret |= adp5589_read(client, ADP5589_5_FIFO_1 + i); for (i = 0; i < pdata->gpimapsize; i++) { unsigned short pin = pdata->gpimap[i].pin; - if (pin <= ADP5589_GPI_PIN_ROW_END) { - evt_mode1 |= (1 << (pin - ADP5589_GPI_PIN_ROW_BASE)); + if (pin <= kpad->var->gpi_pin_row_end) { + evt_mode1 |= (1 << (pin - kpad->var->gpi_pin_row_base)); } else { evt_mode2 |= - ((1 << (pin - ADP5589_GPI_PIN_COL_BASE)) & 0xFF); - evt_mode3 |= - ((1 << (pin - ADP5589_GPI_PIN_COL_BASE)) >> 8); + ((1 << (pin - kpad->var->gpi_pin_col_base)) & 0xFF); + if (!kpad->is_adp5585) + evt_mode3 |= ((1 << (pin - + kpad->var->gpi_pin_col_base)) >> 8); } } if (pdata->gpimapsize) { - ret |= adp5589_write(client, ADP5589_GPI_EVENT_EN_A, evt_mode1); - ret |= adp5589_write(client, ADP5589_GPI_EVENT_EN_B, evt_mode2); - ret |= adp5589_write(client, ADP5589_GPI_EVENT_EN_C, evt_mode3); + ret |= adp5589_write(client, reg(ADP5589_GPI_EVENT_EN_A), + evt_mode1); + ret |= adp5589_write(client, reg(ADP5589_GPI_EVENT_EN_B), + evt_mode2); + if (!kpad->is_adp5585) + ret |= adp5589_write(client, + reg(ADP5589_GPI_EVENT_EN_C), + evt_mode3); } if (pdata->pull_dis_mask & pdata->pullup_en_100k & - pdata->pullup_en_300k & pdata->pulldown_en_300k) + pdata->pullup_en_300k & pdata->pulldown_en_300k) dev_warn(&client->dev, "Conflicting pull resistor config\n"); - for (i = 0; i < MAXGPIO; i++) { - unsigned val = 0; + for (i = 0; i <= kpad->var->max_row_num; i++) { + unsigned val = 0, bit = (1 << i); + if (pdata->pullup_en_300k & bit) + val = 0; + else if (pdata->pulldown_en_300k & bit) + val = 1; + else if (pdata->pullup_en_100k & bit) + val = 2; + else if (pdata->pull_dis_mask & bit) + val = 3; + + pull_mask |= val << (2 * (i & 0x3)); + + if (i == 3 || i == kpad->var->max_row_num) { + ret |= adp5589_write(client, reg(ADP5585_RPULL_CONFIG_A) + + (i >> 2), pull_mask); + pull_mask = 0; + } + } - if (pdata->pullup_en_300k & (1 << i)) + for (i = 0; i <= kpad->var->max_col_num; i++) { + unsigned val = 0, bit = 1 << (i + kpad->var->col_shift); + if (pdata->pullup_en_300k & bit) val = 0; - else if (pdata->pulldown_en_300k & (1 << i)) + else if (pdata->pulldown_en_300k & bit) val = 1; - else if (pdata->pullup_en_100k & (1 << i)) + else if (pdata->pullup_en_100k & bit) val = 2; - else if (pdata->pull_dis_mask & (1 << i)) + else if (pdata->pull_dis_mask & bit) val = 3; pull_mask |= val << (2 * (i & 0x3)); - if ((i & 0x3) == 0x3 || i == MAXGPIO - 1) { + if (i == 3 || i == kpad->var->max_col_num) { ret |= adp5589_write(client, - ADP5589_RPULL_CONFIG_A + (i >> 2), - pull_mask); + reg(ADP5585_RPULL_CONFIG_C) + + (i >> 2), pull_mask); pull_mask = 0; } } if (pdata->reset1_key_1 && pdata->reset1_key_2 && pdata->reset1_key_3) { - ret |= adp5589_write(client, ADP5589_RESET1_EVENT_A, + ret |= adp5589_write(client, reg(ADP5589_RESET1_EVENT_A), adp5589_get_evcode(kpad, pdata->reset1_key_1)); - ret |= adp5589_write(client, ADP5589_RESET1_EVENT_B, + ret |= adp5589_write(client, reg(ADP5589_RESET1_EVENT_B), adp5589_get_evcode(kpad, pdata->reset1_key_2)); - ret |= adp5589_write(client, ADP5589_RESET1_EVENT_C, + ret |= adp5589_write(client, reg(ADP5589_RESET1_EVENT_C), adp5589_get_evcode(kpad, pdata->reset1_key_3)); kpad->extend_cfg |= R4_EXTEND_CFG; } if (pdata->reset2_key_1 && pdata->reset2_key_2) { - ret |= adp5589_write(client, ADP5589_RESET2_EVENT_A, + ret |= adp5589_write(client, reg(ADP5589_RESET2_EVENT_A), adp5589_get_evcode(kpad, pdata->reset2_key_1)); - ret |= adp5589_write(client, ADP5589_RESET2_EVENT_B, + ret |= adp5589_write(client, reg(ADP5589_RESET2_EVENT_B), adp5589_get_evcode(kpad, pdata->reset2_key_2)); kpad->extend_cfg |= C4_EXTEND_CFG; } if (kpad->extend_cfg) { - ret |= adp5589_write(client, ADP5589_RESET_CFG, + ret |= adp5589_write(client, reg(ADP5589_RESET_CFG), pdata->reset_cfg); - ret |= adp5589_write(client, ADP5589_PIN_CONFIG_D, + ret |= adp5589_write(client, reg(ADP5589_PIN_CONFIG_D), kpad->extend_cfg); } - for (i = 0; i <= ADP_BANK(MAXGPIO); i++) - ret |= adp5589_write(client, ADP5589_DEBOUNCE_DIS_A + i, - pdata->debounce_dis_mask >> (i * 8)); + ret |= adp5589_write(client, reg(ADP5589_DEBOUNCE_DIS_A), + pdata->debounce_dis_mask & kpad->var->row_mask); - ret |= adp5589_write(client, ADP5589_POLL_PTIME_CFG, + ret |= adp5589_write(client, reg(ADP5589_DEBOUNCE_DIS_B), + (pdata->debounce_dis_mask >> kpad->var->col_shift) + & kpad->var->col_mask); + + if (!kpad->is_adp5585) + ret |= adp5589_write(client, reg(ADP5589_DEBOUNCE_DIS_C), + (pdata->debounce_dis_mask >> 16) & 0xFF); + + ret |= adp5589_write(client, reg(ADP5589_POLL_PTIME_CFG), pdata->scan_cycle_time & PTIME_MASK); - ret |= adp5589_write(client, ADP5589_INT_STATUS, LOGIC2_INT | - LOGIC1_INT | OVRFLOW_INT | LOCK_INT | + ret |= adp5589_write(client, ADP5589_5_INT_STATUS, + (kpad->is_adp5585 ? 0 : LOGIC2_INT) | + LOGIC1_INT | OVRFLOW_INT | + (kpad->is_adp5585 ? 0 : LOCK_INT) | GPI_INT | EVENT_INT); /* Status is W1C */ - ret |= adp5589_write(client, ADP5589_GENERAL_CFG, + ret |= adp5589_write(client, reg(ADP5589_GENERAL_CFG), INT_CFG | OSC_EN | CORE_CLK(3)); - ret |= adp5589_write(client, ADP5589_INT_EN, + ret |= adp5589_write(client, reg(ADP5589_INT_EN), OVRFLOW_IEN | GPI_IEN | EVENT_IEN); if (ret < 0) { @@ -497,30 +822,33 @@ static int __devinit adp5589_setup(struct adp5589_kpad *kpad) static void __devinit adp5589_report_switch_state(struct adp5589_kpad *kpad) { - int gpi_stat1 = adp5589_read(kpad->client, ADP5589_GPI_STATUS_A); - int gpi_stat2 = adp5589_read(kpad->client, ADP5589_GPI_STATUS_B); - int gpi_stat3 = adp5589_read(kpad->client, ADP5589_GPI_STATUS_C); int gpi_stat_tmp, pin_loc; int i; + int gpi_stat1 = adp5589_read(kpad->client, + kpad->var->reg(ADP5589_GPI_STATUS_A)); + int gpi_stat2 = adp5589_read(kpad->client, + kpad->var->reg(ADP5589_GPI_STATUS_B)); + int gpi_stat3 = !kpad->is_adp5585 ? + adp5589_read(kpad->client, ADP5589_GPI_STATUS_C) : 0; for (i = 0; i < kpad->gpimapsize; i++) { unsigned short pin = kpad->gpimap[i].pin; - if (pin <= ADP5589_GPI_PIN_ROW_END) { + if (pin <= kpad->var->gpi_pin_row_end) { gpi_stat_tmp = gpi_stat1; - pin_loc = pin - ADP5589_GPI_PIN_ROW_BASE; - } else if ((pin - ADP5589_GPI_PIN_COL_BASE) < 8) { + pin_loc = pin - kpad->var->gpi_pin_row_base; + } else if ((pin - kpad->var->gpi_pin_col_base) < 8) { gpi_stat_tmp = gpi_stat2; - pin_loc = pin - ADP5589_GPI_PIN_COL_BASE; + pin_loc = pin - kpad->var->gpi_pin_col_base; } else { gpi_stat_tmp = gpi_stat3; - pin_loc = pin - ADP5589_GPI_PIN_COL_BASE - 8; + pin_loc = pin - kpad->var->gpi_pin_col_base - 8; } if (gpi_stat_tmp < 0) { dev_err(&kpad->client->dev, - "Can't read GPIO_DAT_STAT switch" - " %d default to OFF\n", pin); + "Can't read GPIO_DAT_STAT switch %d, default to OFF\n", + pin); gpi_stat_tmp = 0; } @@ -536,7 +864,8 @@ static int __devinit adp5589_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct adp5589_kpad *kpad; - const struct adp5589_kpad_platform_data *pdata; + const struct adp5589_kpad_platform_data *pdata = + client->dev.platform_data; struct input_dev *input; unsigned int revid; int ret, i; @@ -548,56 +877,79 @@ static int __devinit adp5589_probe(struct i2c_client *client, return -EIO; } - pdata = client->dev.platform_data; if (!pdata) { dev_err(&client->dev, "no platform data?\n"); return -EINVAL; } - if (!((pdata->keypad_en_mask & 0xFF) && - (pdata->keypad_en_mask >> 8)) || !pdata->keymap) { + kpad = kzalloc(sizeof(*kpad), GFP_KERNEL); + if (!kpad) + return -ENOMEM; + + switch (id->driver_data) { + case ADP5585_02: + kpad->adp5585_support_row5 = true; + case ADP5585_01: + kpad->is_adp5585 = true; + kpad->var = &const_adp5585; + break; + case ADP5589: + kpad->var = &const_adp5589; + break; + } + + if (!((pdata->keypad_en_mask & kpad->var->row_mask) && + (pdata->keypad_en_mask >> kpad->var->col_shift)) || + !pdata->keymap) { dev_err(&client->dev, "no rows, cols or keymap from pdata\n"); - return -EINVAL; + error = -EINVAL; + goto err_free_mem; } - if (pdata->keymapsize != ADP5589_KEYMAPSIZE) { + if (pdata->keymapsize != kpad->var->keymapsize) { dev_err(&client->dev, "invalid keymapsize\n"); - return -EINVAL; + error = -EINVAL; + goto err_free_mem; } if (!pdata->gpimap && pdata->gpimapsize) { dev_err(&client->dev, "invalid gpimap from pdata\n"); - return -EINVAL; + error = -EINVAL; + goto err_free_mem; } - if (pdata->gpimapsize > ADP5589_GPIMAPSIZE_MAX) { + if (pdata->gpimapsize > kpad->var->gpimapsize_max) { dev_err(&client->dev, "invalid gpimapsize\n"); - return -EINVAL; + error = -EINVAL; + goto err_free_mem; } for (i = 0; i < pdata->gpimapsize; i++) { unsigned short pin = pdata->gpimap[i].pin; - if (pin < ADP5589_GPI_PIN_BASE || pin > ADP5589_GPI_PIN_END) { + if (pin < kpad->var->gpi_pin_base || + pin > kpad->var->gpi_pin_end) { dev_err(&client->dev, "invalid gpi pin data\n"); - return -EINVAL; + error = -EINVAL; + goto err_free_mem; } - if ((1 << (pin - ADP5589_GPI_PIN_ROW_BASE)) & + if ((1 << (pin - kpad->var->gpi_pin_row_base)) & pdata->keypad_en_mask) { dev_err(&client->dev, "invalid gpi row/col data\n"); - return -EINVAL; + error = -EINVAL; + goto err_free_mem; } } if (!client->irq) { dev_err(&client->dev, "no IRQ?\n"); - return -EINVAL; + error = -EINVAL; + goto err_free_mem; } - kpad = kzalloc(sizeof(*kpad), GFP_KERNEL); input = input_allocate_device(); - if (!kpad || !input) { + if (!input) { error = -ENOMEM; goto err_free_mem; } @@ -605,13 +957,13 @@ static int __devinit adp5589_probe(struct i2c_client *client, kpad->client = client; kpad->input = input; - ret = adp5589_read(client, ADP5589_ID); + ret = adp5589_read(client, ADP5589_5_ID); if (ret < 0) { error = ret; - goto err_free_mem; + goto err_free_input; } - revid = (u8) ret & ADP5589_DEVICE_ID_MASK; + revid = (u8) ret & ADP5589_5_DEVICE_ID_MASK; input->name = client->name; input->phys = "adp5589-keys/input0"; @@ -652,7 +1004,7 @@ static int __devinit adp5589_probe(struct i2c_client *client, error = input_register_device(input); if (error) { dev_err(&client->dev, "unable to register input device\n"); - goto err_free_mem; + goto err_free_input; } error = request_threaded_irq(client->irq, NULL, adp5589_irq, @@ -685,8 +1037,9 @@ err_free_irq: err_unreg_dev: input_unregister_device(input); input = NULL; -err_free_mem: +err_free_input: input_free_device(input); +err_free_mem: kfree(kpad); return error; @@ -696,7 +1049,7 @@ static int __devexit adp5589_remove(struct i2c_client *client) { struct adp5589_kpad *kpad = i2c_get_clientdata(client); - adp5589_write(client, ADP5589_GENERAL_CFG, 0); + adp5589_write(client, kpad->var->reg(ADP5589_GENERAL_CFG), 0); free_irq(client->irq, kpad); input_unregister_device(kpad->input); adp5589_gpio_remove(kpad); @@ -736,7 +1089,9 @@ static int adp5589_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(adp5589_dev_pm_ops, adp5589_suspend, adp5589_resume); static const struct i2c_device_id adp5589_id[] = { - {"adp5589-keys", 0}, + {"adp5589-keys", ADP5589}, + {"adp5585-keys", ADP5585_01}, + {"adp5585-02-keys", ADP5585_02}, /* Adds ROW5 to ADP5585 */ {} }; @@ -767,4 +1122,4 @@ module_exit(adp5589_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Michael Hennerich "); -MODULE_DESCRIPTION("ADP5589 Keypad driver"); +MODULE_DESCRIPTION("ADP5589/ADP5585 Keypad driver"); diff --git a/include/linux/input/adp5589.h b/include/linux/input/adp5589.h index ef792ecfaab..1a05eee15e6 100644 --- a/include/linux/input/adp5589.h +++ b/include/linux/input/adp5589.h @@ -1,5 +1,5 @@ /* - * Analog Devices ADP5589 I/O Expander and QWERTY Keypad Controller + * Analog Devices ADP5589/ADP5585 I/O Expander and QWERTY Keypad Controller * * Copyright 2010-2011 Analog Devices Inc. * @@ -9,89 +9,9 @@ #ifndef _ADP5589_H #define _ADP5589_H -#define ADP5589_ID 0x00 -#define ADP5589_INT_STATUS 0x01 -#define ADP5589_STATUS 0x02 -#define ADP5589_FIFO_1 0x03 -#define ADP5589_FIFO_2 0x04 -#define ADP5589_FIFO_3 0x05 -#define ADP5589_FIFO_4 0x06 -#define ADP5589_FIFO_5 0x07 -#define ADP5589_FIFO_6 0x08 -#define ADP5589_FIFO_7 0x09 -#define ADP5589_FIFO_8 0x0A -#define ADP5589_FIFO_9 0x0B -#define ADP5589_FIFO_10 0x0C -#define ADP5589_FIFO_11 0x0D -#define ADP5589_FIFO_12 0x0E -#define ADP5589_FIFO_13 0x0F -#define ADP5589_FIFO_14 0x10 -#define ADP5589_FIFO_15 0x11 -#define ADP5589_FIFO_16 0x12 -#define ADP5589_GPI_INT_STAT_A 0x13 -#define ADP5589_GPI_INT_STAT_B 0x14 -#define ADP5589_GPI_INT_STAT_C 0x15 -#define ADP5589_GPI_STATUS_A 0x16 -#define ADP5589_GPI_STATUS_B 0x17 -#define ADP5589_GPI_STATUS_C 0x18 -#define ADP5589_RPULL_CONFIG_A 0x19 -#define ADP5589_RPULL_CONFIG_B 0x1A -#define ADP5589_RPULL_CONFIG_C 0x1B -#define ADP5589_RPULL_CONFIG_D 0x1C -#define ADP5589_RPULL_CONFIG_E 0x1D -#define ADP5589_GPI_INT_LEVEL_A 0x1E -#define ADP5589_GPI_INT_LEVEL_B 0x1F -#define ADP5589_GPI_INT_LEVEL_C 0x20 -#define ADP5589_GPI_EVENT_EN_A 0x21 -#define ADP5589_GPI_EVENT_EN_B 0x22 -#define ADP5589_GPI_EVENT_EN_C 0x23 -#define ADP5589_GPI_INTERRUPT_EN_A 0x24 -#define ADP5589_GPI_INTERRUPT_EN_B 0x25 -#define ADP5589_GPI_INTERRUPT_EN_C 0x26 -#define ADP5589_DEBOUNCE_DIS_A 0x27 -#define ADP5589_DEBOUNCE_DIS_B 0x28 -#define ADP5589_DEBOUNCE_DIS_C 0x29 -#define ADP5589_GPO_DATA_OUT_A 0x2A -#define ADP5589_GPO_DATA_OUT_B 0x2B -#define ADP5589_GPO_DATA_OUT_C 0x2C -#define ADP5589_GPO_OUT_MODE_A 0x2D -#define ADP5589_GPO_OUT_MODE_B 0x2E -#define ADP5589_GPO_OUT_MODE_C 0x2F -#define ADP5589_GPIO_DIRECTION_A 0x30 -#define ADP5589_GPIO_DIRECTION_B 0x31 -#define ADP5589_GPIO_DIRECTION_C 0x32 -#define ADP5589_UNLOCK1 0x33 -#define ADP5589_UNLOCK2 0x34 -#define ADP5589_EXT_LOCK_EVENT 0x35 -#define ADP5589_UNLOCK_TIMERS 0x36 -#define ADP5589_LOCK_CFG 0x37 -#define ADP5589_RESET1_EVENT_A 0x38 -#define ADP5589_RESET1_EVENT_B 0x39 -#define ADP5589_RESET1_EVENT_C 0x3A -#define ADP5589_RESET2_EVENT_A 0x3B -#define ADP5589_RESET2_EVENT_B 0x3C -#define ADP5589_RESET_CFG 0x3D -#define ADP5589_PWM_OFFT_LOW 0x3E -#define ADP5589_PWM_OFFT_HIGH 0x3F -#define ADP5589_PWM_ONT_LOW 0x40 -#define ADP5589_PWM_ONT_HIGH 0x41 -#define ADP5589_PWM_CFG 0x42 -#define ADP5589_CLOCK_DIV_CFG 0x43 -#define ADP5589_LOGIC_1_CFG 0x44 -#define ADP5589_LOGIC_2_CFG 0x45 -#define ADP5589_LOGIC_FF_CFG 0x46 -#define ADP5589_LOGIC_INT_EVENT_EN 0x47 -#define ADP5589_POLL_PTIME_CFG 0x48 -#define ADP5589_PIN_CONFIG_A 0x49 -#define ADP5589_PIN_CONFIG_B 0x4A -#define ADP5589_PIN_CONFIG_C 0x4B -#define ADP5589_PIN_CONFIG_D 0x4C -#define ADP5589_GENERAL_CFG 0x4D -#define ADP5589_INT_EN 0x4E - -#define ADP5589_DEVICE_ID_MASK 0xF - -/* Put one of these structures in i2c_board_info platform_data */ +/* + * ADP5589 specific GPI and Keymap defines + */ #define ADP5589_KEYMAPSIZE 88 @@ -127,6 +47,35 @@ #define ADP5589_GPIMAPSIZE_MAX (ADP5589_GPI_PIN_END - ADP5589_GPI_PIN_BASE + 1) +/* + * ADP5585 specific GPI and Keymap defines + */ + +#define ADP5585_KEYMAPSIZE 30 + +#define ADP5585_GPI_PIN_ROW0 37 +#define ADP5585_GPI_PIN_ROW1 38 +#define ADP5585_GPI_PIN_ROW2 39 +#define ADP5585_GPI_PIN_ROW3 40 +#define ADP5585_GPI_PIN_ROW4 41 +#define ADP5585_GPI_PIN_ROW5 42 +#define ADP5585_GPI_PIN_COL0 43 +#define ADP5585_GPI_PIN_COL1 44 +#define ADP5585_GPI_PIN_COL2 45 +#define ADP5585_GPI_PIN_COL3 46 +#define ADP5585_GPI_PIN_COL4 47 +#define GPI_LOGIC 48 + +#define ADP5585_GPI_PIN_ROW_BASE ADP5585_GPI_PIN_ROW0 +#define ADP5585_GPI_PIN_ROW_END ADP5585_GPI_PIN_ROW5 +#define ADP5585_GPI_PIN_COL_BASE ADP5585_GPI_PIN_COL0 +#define ADP5585_GPI_PIN_COL_END ADP5585_GPI_PIN_COL4 + +#define ADP5585_GPI_PIN_BASE ADP5585_GPI_PIN_ROW_BASE +#define ADP5585_GPI_PIN_END ADP5585_GPI_PIN_COL_END + +#define ADP5585_GPIMAPSIZE_MAX (ADP5585_GPI_PIN_END - ADP5585_GPI_PIN_BASE + 1) + struct adp5589_gpi_map { unsigned short pin; unsigned short sw_evt; @@ -159,7 +108,7 @@ struct adp5589_gpi_map { #define RESET2_POL_HIGH (1 << 7) #define RESET2_POL_LOW (0 << 7) -/* Mask Bits: +/* ADP5589 Mask Bits: * C C C C C C C C C C C | R R R R R R R R * 1 9 8 7 6 5 4 3 2 1 0 | 7 6 5 4 3 2 1 0 * 0 @@ -168,18 +117,44 @@ struct adp5589_gpi_map { * 8 7 6 5 4 3 2 1 0 9 8 | 7 6 5 4 3 2 1 0 */ -#define ADP_ROW(x) (1 << (x)) -#define ADP_COL(x) (1 << (x + 8)) +#define ADP_ROW(x) (1 << (x)) +#define ADP_COL(x) (1 << (x + 8)) +#define ADP5589_ROW_MASK 0xFF +#define ADP5589_COL_MASK 0xFF +#define ADP5589_COL_SHIFT 8 +#define ADP5589_MAX_ROW_NUM 7 +#define ADP5589_MAX_COL_NUM 10 + +/* ADP5585 Mask Bits: + * C C C C C | R R R R R R + * 4 3 2 1 0 | 5 4 3 2 1 0 + * + * ---- BIT -- ----------- + * 1 0 0 0 0 | 0 0 0 0 0 0 + * 0 9 8 7 6 | 5 4 3 2 1 0 + */ + +#define ADP5585_ROW_MASK 0x3F +#define ADP5585_COL_MASK 0x1F +#define ADP5585_ROW_SHIFT 0 +#define ADP5585_COL_SHIFT 6 +#define ADP5585_MAX_ROW_NUM 5 +#define ADP5585_MAX_COL_NUM 4 + +#define ADP5585_ROW(x) (1 << ((x) & ADP5585_ROW_MASK)) +#define ADP5585_COL(x) (1 << (((x) & ADP5585_COL_MASK) + ADP5585_COL_SHIFT)) + +/* Put one of these structures in i2c_board_info platform_data */ struct adp5589_kpad_platform_data { unsigned keypad_en_mask; /* Keypad (Rows/Columns) enable mask */ const unsigned short *keymap; /* Pointer to keymap */ unsigned short keymapsize; /* Keymap size */ bool repeat; /* Enable key repeat */ - bool en_keylock; /* Enable key lock feature */ - unsigned char unlock_key1; /* Unlock Key 1 */ - unsigned char unlock_key2; /* Unlock Key 2 */ - unsigned char unlock_timer; /* Time in seconds [0..7] between the two unlock keys 0=disable */ + bool en_keylock; /* Enable key lock feature (ADP5589 only)*/ + unsigned char unlock_key1; /* Unlock Key 1 (ADP5589 only) */ + unsigned char unlock_key2; /* Unlock Key 2 (ADP5589 only) */ + unsigned char unlock_timer; /* Time in seconds [0..7] between the two unlock keys 0=disable (ADP5589 only) */ unsigned char scan_cycle_time; /* Time between consecutive scan cycles */ unsigned char reset_cfg; /* Reset config */ unsigned short reset1_key_1; /* Reset Key 1 */ -- cgit v1.2.3-70-g09d2