From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/isdn/hisax/elsa_ser.c | 657 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 657 insertions(+) create mode 100644 drivers/isdn/hisax/elsa_ser.c (limited to 'drivers/isdn/hisax/elsa_ser.c') diff --git a/drivers/isdn/hisax/elsa_ser.c b/drivers/isdn/hisax/elsa_ser.c new file mode 100644 index 00000000000..689c8339569 --- /dev/null +++ b/drivers/isdn/hisax/elsa_ser.c @@ -0,0 +1,657 @@ +/* $Id: elsa_ser.c,v 2.14.2.3 2004/02/11 13:21:33 keil Exp $ + * + * stuff for the serial modem on ELSA cards + * + * This software may be used and distributed according to the terms + * of the GNU General Public License, incorporated herein by reference. + * + */ + +#include +#include +#include + +#define MAX_MODEM_BUF 256 +#define WAKEUP_CHARS (MAX_MODEM_BUF/2) +#define RS_ISR_PASS_LIMIT 256 +#define BASE_BAUD ( 1843200 / 16 ) + +//#define SERIAL_DEBUG_OPEN 1 +//#define SERIAL_DEBUG_INTR 1 +//#define SERIAL_DEBUG_FLOW 1 +#undef SERIAL_DEBUG_OPEN +#undef SERIAL_DEBUG_INTR +#undef SERIAL_DEBUG_FLOW +#undef SERIAL_DEBUG_REG +//#define SERIAL_DEBUG_REG 1 + +#ifdef SERIAL_DEBUG_REG +static u_char deb[32]; +const char *ModemIn[] = {"RBR","IER","IIR","LCR","MCR","LSR","MSR","SCR"}; +const char *ModemOut[] = {"THR","IER","FCR","LCR","MCR","LSR","MSR","SCR"}; +#endif + +static char *MInit_1 = "AT&F&C1E0&D2\r\0"; +static char *MInit_2 = "ATL2M1S64=13\r\0"; +static char *MInit_3 = "AT+FCLASS=0\r\0"; +static char *MInit_4 = "ATV1S2=128X1\r\0"; +static char *MInit_5 = "AT\\V8\\N3\r\0"; +static char *MInit_6 = "ATL0M0&G0%E1\r\0"; +static char *MInit_7 = "AT%L1%M0%C3\r\0"; + +static char *MInit_speed28800 = "AT%G0%B28800\r\0"; + +static char *MInit_dialout = "ATs7=60 x1 d\r\0"; +static char *MInit_dialin = "ATs7=60 x1 a\r\0"; + + +static inline unsigned int serial_in(struct IsdnCardState *cs, int offset) +{ +#ifdef SERIAL_DEBUG_REG + u_int val = inb(cs->hw.elsa.base + 8 + offset); + debugl1(cs,"in %s %02x",ModemIn[offset], val); + return(val); +#else + return inb(cs->hw.elsa.base + 8 + offset); +#endif +} + +static inline unsigned int serial_inp(struct IsdnCardState *cs, int offset) +{ +#ifdef SERIAL_DEBUG_REG +#ifdef CONFIG_SERIAL_NOPAUSE_IO + u_int val = inb(cs->hw.elsa.base + 8 + offset); + debugl1(cs,"inp %s %02x",ModemIn[offset], val); +#else + u_int val = inb_p(cs->hw.elsa.base + 8 + offset); + debugl1(cs,"inP %s %02x",ModemIn[offset], val); +#endif + return(val); +#else +#ifdef CONFIG_SERIAL_NOPAUSE_IO + return inb(cs->hw.elsa.base + 8 + offset); +#else + return inb_p(cs->hw.elsa.base + 8 + offset); +#endif +#endif +} + +static inline void serial_out(struct IsdnCardState *cs, int offset, int value) +{ +#ifdef SERIAL_DEBUG_REG + debugl1(cs,"out %s %02x",ModemOut[offset], value); +#endif + outb(value, cs->hw.elsa.base + 8 + offset); +} + +static inline void serial_outp(struct IsdnCardState *cs, int offset, + int value) +{ +#ifdef SERIAL_DEBUG_REG +#ifdef CONFIG_SERIAL_NOPAUSE_IO + debugl1(cs,"outp %s %02x",ModemOut[offset], value); +#else + debugl1(cs,"outP %s %02x",ModemOut[offset], value); +#endif +#endif +#ifdef CONFIG_SERIAL_NOPAUSE_IO + outb(value, cs->hw.elsa.base + 8 + offset); +#else + outb_p(value, cs->hw.elsa.base + 8 + offset); +#endif +} + +/* + * This routine is called to set the UART divisor registers to match + * the specified baud rate for a serial port. + */ +static void change_speed(struct IsdnCardState *cs, int baud) +{ + int quot = 0, baud_base; + unsigned cval, fcr = 0; + int bits; + + + /* byte size and parity */ + cval = 0x03; bits = 10; + /* Determine divisor based on baud rate */ + baud_base = BASE_BAUD; + quot = baud_base / baud; + /* If the quotient is ever zero, default to 9600 bps */ + if (!quot) + quot = baud_base / 9600; + + /* Set up FIFO's */ + if ((baud_base / quot) < 2400) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1; + else + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_8; + serial_outp(cs, UART_FCR, fcr); + /* CTS flow control flag and modem status interrupts */ + cs->hw.elsa.IER &= ~UART_IER_MSI; + cs->hw.elsa.IER |= UART_IER_MSI; + serial_outp(cs, UART_IER, cs->hw.elsa.IER); + + debugl1(cs,"modem quot=0x%x", quot); + serial_outp(cs, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */ + serial_outp(cs, UART_DLL, quot & 0xff); /* LS of divisor */ + serial_outp(cs, UART_DLM, quot >> 8); /* MS of divisor */ + serial_outp(cs, UART_LCR, cval); /* reset DLAB */ + serial_inp(cs, UART_RX); +} + +static int mstartup(struct IsdnCardState *cs) +{ + int retval=0; + + /* + * Clear the FIFO buffers and disable them + * (they will be reenabled in change_speed()) + */ + serial_outp(cs, UART_FCR, (UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT)); + + /* + * At this point there's no way the LSR could still be 0xFF; + * if it is, then bail out, because there's likely no UART + * here. + */ + if (serial_inp(cs, UART_LSR) == 0xff) { + retval = -ENODEV; + goto errout; + } + + /* + * Clear the interrupt registers. + */ + (void) serial_inp(cs, UART_RX); + (void) serial_inp(cs, UART_IIR); + (void) serial_inp(cs, UART_MSR); + + /* + * Now, initialize the UART + */ + serial_outp(cs, UART_LCR, UART_LCR_WLEN8); /* reset DLAB */ + + cs->hw.elsa.MCR = 0; + cs->hw.elsa.MCR = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2; + serial_outp(cs, UART_MCR, cs->hw.elsa.MCR); + + /* + * Finally, enable interrupts + */ + cs->hw.elsa.IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; + serial_outp(cs, UART_IER, cs->hw.elsa.IER); /* enable interrupts */ + + /* + * And clear the interrupt registers again for luck. + */ + (void)serial_inp(cs, UART_LSR); + (void)serial_inp(cs, UART_RX); + (void)serial_inp(cs, UART_IIR); + (void)serial_inp(cs, UART_MSR); + + cs->hw.elsa.transcnt = cs->hw.elsa.transp = 0; + cs->hw.elsa.rcvcnt = cs->hw.elsa.rcvp =0; + + /* + * and set the speed of the serial port + */ + change_speed(cs, BASE_BAUD); + cs->hw.elsa.MFlag = 1; +errout: + return retval; +} + +/* + * This routine will shutdown a serial port; interrupts are disabled, and + * DTR is dropped if the hangup on close termio flag is on. + */ +static void mshutdown(struct IsdnCardState *cs) +{ + +#ifdef SERIAL_DEBUG_OPEN + printk(KERN_DEBUG"Shutting down serial ...."); +#endif + + /* + * clear delta_msr_wait queue to avoid mem leaks: we may free the irq + * here so the queue might never be waken up + */ + + cs->hw.elsa.IER = 0; + serial_outp(cs, UART_IER, 0x00); /* disable all intrs */ + cs->hw.elsa.MCR &= ~UART_MCR_OUT2; + + /* disable break condition */ + serial_outp(cs, UART_LCR, serial_inp(cs, UART_LCR) & ~UART_LCR_SBC); + + cs->hw.elsa.MCR &= ~(UART_MCR_DTR|UART_MCR_RTS); + serial_outp(cs, UART_MCR, cs->hw.elsa.MCR); + + /* disable FIFO's */ + serial_outp(cs, UART_FCR, (UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT)); + serial_inp(cs, UART_RX); /* read data port to reset things */ + +#ifdef SERIAL_DEBUG_OPEN + printk(" done\n"); +#endif +} + +inline int +write_modem(struct BCState *bcs) { + int ret=0; + struct IsdnCardState *cs = bcs->cs; + int count, len, fp; + + if (!bcs->tx_skb) + return 0; + if (bcs->tx_skb->len <= 0) + return 0; + len = bcs->tx_skb->len; + if (len > MAX_MODEM_BUF - cs->hw.elsa.transcnt) + len = MAX_MODEM_BUF - cs->hw.elsa.transcnt; + fp = cs->hw.elsa.transcnt + cs->hw.elsa.transp; + fp &= (MAX_MODEM_BUF -1); + count = len; + if (count > MAX_MODEM_BUF - fp) { + count = MAX_MODEM_BUF - fp; + memcpy(cs->hw.elsa.transbuf + fp, bcs->tx_skb->data, count); + skb_pull(bcs->tx_skb, count); + cs->hw.elsa.transcnt += count; + ret = count; + count = len - count; + fp = 0; + } + memcpy((cs->hw.elsa.transbuf + fp), bcs->tx_skb->data, count); + skb_pull(bcs->tx_skb, count); + cs->hw.elsa.transcnt += count; + ret += count; + + if (cs->hw.elsa.transcnt && + !(cs->hw.elsa.IER & UART_IER_THRI)) { + cs->hw.elsa.IER |= UART_IER_THRI; + serial_outp(cs, UART_IER, cs->hw.elsa.IER); + } + return(ret); +} + +inline void +modem_fill(struct BCState *bcs) { + + if (bcs->tx_skb) { + if (bcs->tx_skb->len) { + write_modem(bcs); + return; + } else { + if (test_bit(FLG_LLI_L1WAKEUP,&bcs->st->lli.flag) && + (PACKET_NOACK != bcs->tx_skb->pkt_type)) { + u_long flags; + spin_lock_irqsave(&bcs->aclock, flags); + bcs->ackcnt += bcs->hw.hscx.count; + spin_unlock_irqrestore(&bcs->aclock, flags); + schedule_event(bcs, B_ACKPENDING); + } + dev_kfree_skb_any(bcs->tx_skb); + bcs->tx_skb = NULL; + } + } + if ((bcs->tx_skb = skb_dequeue(&bcs->squeue))) { + bcs->hw.hscx.count = 0; + test_and_set_bit(BC_FLG_BUSY, &bcs->Flag); + write_modem(bcs); + } else { + test_and_clear_bit(BC_FLG_BUSY, &bcs->Flag); + schedule_event(bcs, B_XMTBUFREADY); + } +} + +static inline void receive_chars(struct IsdnCardState *cs, + int *status) +{ + unsigned char ch; + struct sk_buff *skb; + + do { + ch = serial_in(cs, UART_RX); + if (cs->hw.elsa.rcvcnt >= MAX_MODEM_BUF) + break; + cs->hw.elsa.rcvbuf[cs->hw.elsa.rcvcnt++] = ch; +#ifdef SERIAL_DEBUG_INTR + printk("DR%02x:%02x...", ch, *status); +#endif + if (*status & (UART_LSR_BI | UART_LSR_PE | + UART_LSR_FE | UART_LSR_OE)) { + +#ifdef SERIAL_DEBUG_INTR + printk("handling exept...."); +#endif + } + *status = serial_inp(cs, UART_LSR); + } while (*status & UART_LSR_DR); + if (cs->hw.elsa.MFlag == 2) { + if (!(skb = dev_alloc_skb(cs->hw.elsa.rcvcnt))) + printk(KERN_WARNING "ElsaSER: receive out of memory\n"); + else { + memcpy(skb_put(skb, cs->hw.elsa.rcvcnt), cs->hw.elsa.rcvbuf, + cs->hw.elsa.rcvcnt); + skb_queue_tail(& cs->hw.elsa.bcs->rqueue, skb); + } + schedule_event(cs->hw.elsa.bcs, B_RCVBUFREADY); + } else { + char tmp[128]; + char *t = tmp; + + t += sprintf(t, "modem read cnt %d", cs->hw.elsa.rcvcnt); + QuickHex(t, cs->hw.elsa.rcvbuf, cs->hw.elsa.rcvcnt); + debugl1(cs, tmp); + } + cs->hw.elsa.rcvcnt = 0; +} + +static inline void transmit_chars(struct IsdnCardState *cs, int *intr_done) +{ + int count; + + debugl1(cs, "transmit_chars: p(%x) cnt(%x)", cs->hw.elsa.transp, + cs->hw.elsa.transcnt); + + if (cs->hw.elsa.transcnt <= 0) { + cs->hw.elsa.IER &= ~UART_IER_THRI; + serial_out(cs, UART_IER, cs->hw.elsa.IER); + return; + } + count = 16; + do { + serial_outp(cs, UART_TX, cs->hw.elsa.transbuf[cs->hw.elsa.transp++]); + if (cs->hw.elsa.transp >= MAX_MODEM_BUF) + cs->hw.elsa.transp=0; + if (--cs->hw.elsa.transcnt <= 0) + break; + } while (--count > 0); + if ((cs->hw.elsa.transcnt < WAKEUP_CHARS) && (cs->hw.elsa.MFlag==2)) + modem_fill(cs->hw.elsa.bcs); + +#ifdef SERIAL_DEBUG_INTR + printk("THRE..."); +#endif + if (intr_done) + *intr_done = 0; + if (cs->hw.elsa.transcnt <= 0) { + cs->hw.elsa.IER &= ~UART_IER_THRI; + serial_outp(cs, UART_IER, cs->hw.elsa.IER); + } +} + + +static void rs_interrupt_elsa(int irq, struct IsdnCardState *cs) +{ + int status, iir, msr; + int pass_counter = 0; + +#ifdef SERIAL_DEBUG_INTR + printk("rs_interrupt_single(%d)...", irq); +#endif + + do { + status = serial_inp(cs, UART_LSR); + debugl1(cs,"rs LSR %02x", status); +#ifdef SERIAL_DEBUG_INTR + printk("status = %x...", status); +#endif + if (status & UART_LSR_DR) + receive_chars(cs, &status); + if (status & UART_LSR_THRE) + transmit_chars(cs, NULL); + if (pass_counter++ > RS_ISR_PASS_LIMIT) { + printk("rs_single loop break.\n"); + break; + } + iir = serial_inp(cs, UART_IIR); + debugl1(cs,"rs IIR %02x", iir); + if ((iir & 0xf) == 0) { + msr = serial_inp(cs, UART_MSR); + debugl1(cs,"rs MSR %02x", msr); + } + } while (!(iir & UART_IIR_NO_INT)); +#ifdef SERIAL_DEBUG_INTR + printk("end.\n"); +#endif +} + +extern int open_hscxstate(struct IsdnCardState *cs, struct BCState *bcs); +extern void modehscx(struct BCState *bcs, int mode, int bc); +extern void hscx_l2l1(struct PStack *st, int pr, void *arg); + +void +close_elsastate(struct BCState *bcs) +{ + modehscx(bcs, 0, bcs->channel); + if (test_and_clear_bit(BC_FLG_INIT, &bcs->Flag)) { + if (bcs->hw.hscx.rcvbuf) { + if (bcs->mode != L1_MODE_MODEM) + kfree(bcs->hw.hscx.rcvbuf); + bcs->hw.hscx.rcvbuf = NULL; + } + skb_queue_purge(&bcs->rqueue); + skb_queue_purge(&bcs->squeue); + if (bcs->tx_skb) { + dev_kfree_skb_any(bcs->tx_skb); + bcs->tx_skb = NULL; + test_and_clear_bit(BC_FLG_BUSY, &bcs->Flag); + } + } +} + +void +modem_write_cmd(struct IsdnCardState *cs, u_char *buf, int len) { + int count, fp; + u_char *msg = buf; + + if (!len) + return; + if (len > (MAX_MODEM_BUF - cs->hw.elsa.transcnt)) { + return; + } + fp = cs->hw.elsa.transcnt + cs->hw.elsa.transp; + fp &= (MAX_MODEM_BUF -1); + count = len; + if (count > MAX_MODEM_BUF - fp) { + count = MAX_MODEM_BUF - fp; + memcpy(cs->hw.elsa.transbuf + fp, msg, count); + cs->hw.elsa.transcnt += count; + msg += count; + count = len - count; + fp = 0; + } + memcpy(cs->hw.elsa.transbuf + fp, msg, count); + cs->hw.elsa.transcnt += count; + if (cs->hw.elsa.transcnt && + !(cs->hw.elsa.IER & UART_IER_THRI)) { + cs->hw.elsa.IER |= UART_IER_THRI; + serial_outp(cs, UART_IER, cs->hw.elsa.IER); + } +} + +void +modem_set_init(struct IsdnCardState *cs) { + int timeout; + +#define RCV_DELAY 20000 + modem_write_cmd(cs, MInit_1, strlen(MInit_1)); + timeout = 1000; + while(timeout-- && cs->hw.elsa.transcnt) + udelay(1000); + debugl1(cs, "msi tout=%d", timeout); + udelay(RCV_DELAY); + modem_write_cmd(cs, MInit_2, strlen(MInit_2)); + timeout = 1000; + while(timeout-- && cs->hw.elsa.transcnt) + udelay(1000); + debugl1(cs, "msi tout=%d", timeout); + udelay(RCV_DELAY); + modem_write_cmd(cs, MInit_3, strlen(MInit_3)); + timeout = 1000; + while(timeout-- && cs->hw.elsa.transcnt) + udelay(1000); + debugl1(cs, "msi tout=%d", timeout); + udelay(RCV_DELAY); + modem_write_cmd(cs, MInit_4, strlen(MInit_4)); + timeout = 1000; + while(timeout-- && cs->hw.elsa.transcnt) + udelay(1000); + debugl1(cs, "msi tout=%d", timeout); + udelay(RCV_DELAY ); + modem_write_cmd(cs, MInit_5, strlen(MInit_5)); + timeout = 1000; + while(timeout-- && cs->hw.elsa.transcnt) + udelay(1000); + debugl1(cs, "msi tout=%d", timeout); + udelay(RCV_DELAY); + modem_write_cmd(cs, MInit_6, strlen(MInit_6)); + timeout = 1000; + while(timeout-- && cs->hw.elsa.transcnt) + udelay(1000); + debugl1(cs, "msi tout=%d", timeout); + udelay(RCV_DELAY); + modem_write_cmd(cs, MInit_7, strlen(MInit_7)); + timeout = 1000; + while(timeout-- && cs->hw.elsa.transcnt) + udelay(1000); + debugl1(cs, "msi tout=%d", timeout); + udelay(RCV_DELAY); +} + +void +modem_set_dial(struct IsdnCardState *cs, int outgoing) { + int timeout; +#define RCV_DELAY 20000 + + modem_write_cmd(cs, MInit_speed28800, strlen(MInit_speed28800)); + timeout = 1000; + while(timeout-- && cs->hw.elsa.transcnt) + udelay(1000); + debugl1(cs, "msi tout=%d", timeout); + udelay(RCV_DELAY); + if (outgoing) + modem_write_cmd(cs, MInit_dialout, strlen(MInit_dialout)); + else + modem_write_cmd(cs, MInit_dialin, strlen(MInit_dialin)); + timeout = 1000; + while(timeout-- && cs->hw.elsa.transcnt) + udelay(1000); + debugl1(cs, "msi tout=%d", timeout); + udelay(RCV_DELAY); +} + +void +modem_l2l1(struct PStack *st, int pr, void *arg) +{ + struct BCState *bcs = st->l1.bcs; + struct sk_buff *skb = arg; + u_long flags; + + if (pr == (PH_DATA | REQUEST)) { + spin_lock_irqsave(&bcs->cs->lock, flags); + if (bcs->tx_skb) { + skb_queue_tail(&bcs->squeue, skb); + } else { + bcs->tx_skb = skb; + test_and_set_bit(BC_FLG_BUSY, &bcs->Flag); + bcs->hw.hscx.count = 0; + write_modem(bcs); + } + spin_unlock_irqrestore(&bcs->cs->lock, flags); + } else if (pr == (PH_ACTIVATE | REQUEST)) { + test_and_set_bit(BC_FLG_ACTIV, &bcs->Flag); + st->l1.l1l2(st, PH_ACTIVATE | CONFIRM, NULL); + set_arcofi(bcs->cs, st->l1.bc); + mstartup(bcs->cs); + modem_set_dial(bcs->cs, test_bit(FLG_ORIG, &st->l2.flag)); + bcs->cs->hw.elsa.MFlag=2; + } else if (pr == (PH_DEACTIVATE | REQUEST)) { + test_and_clear_bit(BC_FLG_ACTIV, &bcs->Flag); + bcs->cs->dc.isac.arcofi_bc = st->l1.bc; + arcofi_fsm(bcs->cs, ARCOFI_START, &ARCOFI_XOP_0); + interruptible_sleep_on(&bcs->cs->dc.isac.arcofi_wait); + bcs->cs->hw.elsa.MFlag=1; + } else { + printk(KERN_WARNING"ElsaSer: unknown pr %x\n", pr); + } +} + +int +setstack_elsa(struct PStack *st, struct BCState *bcs) +{ + + bcs->channel = st->l1.bc; + switch (st->l1.mode) { + case L1_MODE_HDLC: + case L1_MODE_TRANS: + if (open_hscxstate(st->l1.hardware, bcs)) + return (-1); + st->l2.l2l1 = hscx_l2l1; + break; + case L1_MODE_MODEM: + bcs->mode = L1_MODE_MODEM; + if (!test_and_set_bit(BC_FLG_INIT, &bcs->Flag)) { + bcs->hw.hscx.rcvbuf = bcs->cs->hw.elsa.rcvbuf; + skb_queue_head_init(&bcs->rqueue); + skb_queue_head_init(&bcs->squeue); + } + bcs->tx_skb = NULL; + test_and_clear_bit(BC_FLG_BUSY, &bcs->Flag); + bcs->event = 0; + bcs->hw.hscx.rcvidx = 0; + bcs->tx_cnt = 0; + bcs->cs->hw.elsa.bcs = bcs; + st->l2.l2l1 = modem_l2l1; + break; + } + st->l1.bcs = bcs; + setstack_manager(st); + bcs->st = st; + setstack_l1_B(st); + return (0); +} + +void +init_modem(struct IsdnCardState *cs) { + + cs->bcs[0].BC_SetStack = setstack_elsa; + cs->bcs[1].BC_SetStack = setstack_elsa; + cs->bcs[0].BC_Close = close_elsastate; + cs->bcs[1].BC_Close = close_elsastate; + if (!(cs->hw.elsa.rcvbuf = kmalloc(MAX_MODEM_BUF, + GFP_ATOMIC))) { + printk(KERN_WARNING + "Elsa: No modem mem hw.elsa.rcvbuf\n"); + return; + } + if (!(cs->hw.elsa.transbuf = kmalloc(MAX_MODEM_BUF, + GFP_ATOMIC))) { + printk(KERN_WARNING + "Elsa: No modem mem hw.elsa.transbuf\n"); + kfree(cs->hw.elsa.rcvbuf); + cs->hw.elsa.rcvbuf = NULL; + return; + } + if (mstartup(cs)) { + printk(KERN_WARNING "Elsa: problem startup modem\n"); + } + modem_set_init(cs); +} + +void +release_modem(struct IsdnCardState *cs) { + + cs->hw.elsa.MFlag = 0; + if (cs->hw.elsa.transbuf) { + if (cs->hw.elsa.rcvbuf) { + mshutdown(cs); + kfree(cs->hw.elsa.rcvbuf); + cs->hw.elsa.rcvbuf = NULL; + } + kfree(cs->hw.elsa.transbuf); + cs->hw.elsa.transbuf = NULL; + } +} -- cgit v1.2.3-70-g09d2