From 5843492ccce3568ff6eb6efc52fb793923207d0b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 31 Aug 2008 20:26:48 -0700 Subject: leds: Add driver for Sunfire UltraSPARC server LEDs. Signed-off-by: David S. Miller --- drivers/leds/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/leds/Makefile') diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index ff7982b4456..83ee4991b87 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o obj-$(CONFIG_LEDS_H1940) += leds-h1940.o obj-$(CONFIG_LEDS_COBALT_QUBE) += leds-cobalt-qube.o obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o +obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o obj-$(CONFIG_LEDS_CM_X270) += leds-cm-x270.o -- cgit v1.2.3-70-g09d2 From 60cf711d47d995c3d61e222502fde3c11cedc434 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Fri, 5 Sep 2008 18:36:21 +0800 Subject: [ARM] pxa/corgi: use leds-gpio for led driving and drop leds-corgi Now as the scoop pins are covered by the generic gpio API, we can use leds-gpio driver instead of special leds-corgi Drop leds-corgi.c and remove the declaration of now un-referenced corgiscoop_device. Signed-off-by: Dmitry Baryshkov Cc: Richard Purdie Signed-off-by: Eric Miao Signed-off-by: Russell King --- arch/arm/mach-pxa/corgi.c | 24 ++++++++- drivers/leds/Kconfig | 7 --- drivers/leds/Makefile | 1 - drivers/leds/leds-corgi.c | 124 ---------------------------------------------- 4 files changed, 22 insertions(+), 134 deletions(-) delete mode 100644 drivers/leds/leds-corgi.c (limited to 'drivers/leds/Makefile') diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index da1e6019070..f8fd1d87215 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -271,13 +271,33 @@ static struct platform_device corgikbd_device = { .id = -1, }; - /* * Corgi LEDs */ +static struct gpio_led corgi_gpio_leds[] = { + { + .name = "corgi:amber:charge", + .default_trigger = "sharpsl-charge", + .gpio = CORGI_GPIO_LED_ORANGE, + }, + { + .name = "corgi:green:mail", + .default_trigger = "nand-disk", + .gpio = CORGI_GPIO_LED_GREEN, + }, +}; + +static struct gpio_led_platform_data corgi_gpio_leds_info = { + .leds = corgi_gpio_leds, + .num_leds = ARRAY_SIZE(corgi_gpio_leds), +}; + static struct platform_device corgiled_device = { - .name = "corgi-led", + .name = "leds-gpio", .id = -1, + .dev = { + .platform_data = &corgi_gpio_leds_info, + }, }; /* diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 9556262dda5..27c60daa73f 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -24,13 +24,6 @@ config LEDS_ATMEL_PWM This option enables support for LEDs driven using outputs of the dedicated PWM controller found on newer Atmel SOCs. -config LEDS_CORGI - tristate "LED Support for the Sharp SL-C7x0 series" - depends on LEDS_CLASS && PXA_SHARP_C7xx - help - This option enables support for the LEDs on Sharp Zaurus - SL-C7x0 series (C700, C750, C760, C860). - config LEDS_LOCOMO tristate "LED Support for Locomo device" depends on LEDS_CLASS && SHARP_LOCOMO diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index ff7982b4456..556f8d2e7bb 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -6,7 +6,6 @@ obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o # LED Platform Drivers obj-$(CONFIG_LEDS_ATMEL_PWM) += leds-atmel-pwm.o -obj-$(CONFIG_LEDS_CORGI) += leds-corgi.o obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o obj-$(CONFIG_LEDS_S3C24XX) += leds-s3c24xx.o diff --git a/drivers/leds/leds-corgi.c b/drivers/leds/leds-corgi.c deleted file mode 100644 index bc2dcd89f63..00000000000 --- a/drivers/leds/leds-corgi.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - * LED Triggers Core - * - * Copyright 2005-2006 Openedhand Ltd. - * - * Author: Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -static void corgiled_amber_set(struct led_classdev *led_cdev, - enum led_brightness value) -{ - if (value) - GPSR0 = GPIO_bit(CORGI_GPIO_LED_ORANGE); - else - GPCR0 = GPIO_bit(CORGI_GPIO_LED_ORANGE); -} - -static void corgiled_green_set(struct led_classdev *led_cdev, - enum led_brightness value) -{ - if (value) - set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN); - else - reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN); -} - -static struct led_classdev corgi_amber_led = { - .name = "corgi:amber:charge", - .default_trigger = "sharpsl-charge", - .brightness_set = corgiled_amber_set, -}; - -static struct led_classdev corgi_green_led = { - .name = "corgi:green:mail", - .default_trigger = "nand-disk", - .brightness_set = corgiled_green_set, -}; - -#ifdef CONFIG_PM -static int corgiled_suspend(struct platform_device *dev, pm_message_t state) -{ -#ifdef CONFIG_LEDS_TRIGGERS - if (corgi_amber_led.trigger && - strcmp(corgi_amber_led.trigger->name, "sharpsl-charge")) -#endif - led_classdev_suspend(&corgi_amber_led); - led_classdev_suspend(&corgi_green_led); - return 0; -} - -static int corgiled_resume(struct platform_device *dev) -{ - led_classdev_resume(&corgi_amber_led); - led_classdev_resume(&corgi_green_led); - return 0; -} -#endif - -static int corgiled_probe(struct platform_device *pdev) -{ - int ret; - - ret = led_classdev_register(&pdev->dev, &corgi_amber_led); - if (ret < 0) - return ret; - - ret = led_classdev_register(&pdev->dev, &corgi_green_led); - if (ret < 0) - led_classdev_unregister(&corgi_amber_led); - - return ret; -} - -static int corgiled_remove(struct platform_device *pdev) -{ - led_classdev_unregister(&corgi_amber_led); - led_classdev_unregister(&corgi_green_led); - return 0; -} - -static struct platform_driver corgiled_driver = { - .probe = corgiled_probe, - .remove = corgiled_remove, -#ifdef CONFIG_PM - .suspend = corgiled_suspend, - .resume = corgiled_resume, -#endif - .driver = { - .name = "corgi-led", - .owner = THIS_MODULE, - }, -}; - -static int __init corgiled_init(void) -{ - return platform_driver_register(&corgiled_driver); -} - -static void __exit corgiled_exit(void) -{ - platform_driver_unregister(&corgiled_driver); -} - -module_init(corgiled_init); -module_exit(corgiled_exit); - -MODULE_AUTHOR("Richard Purdie "); -MODULE_DESCRIPTION("Corgi LED driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:corgi-led"); -- cgit v1.2.3-70-g09d2 From 4fe3224fffc56b13fe54e0fa479b64db83d8b125 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Fri, 5 Sep 2008 22:38:23 +0800 Subject: [ARM] pxa/spitz: use leds-gpio for led driving and drop leds-spitz Now as the scoop pins are covered by the generic gpio API, we can use leds-gpio driver instead of special leds-spitz Drop leds-spitz.c and the declarations of now un-referenced spitzscoop_device, spitzscoop2_device. Signed-off-by: Dmitry Baryshkov Cc: Richard Purdie Signed-off-by: Eric Miao Signed-off-by: Russell King --- arch/arm/mach-pxa/include/mach/spitz.h | 8 +- arch/arm/mach-pxa/spitz.c | 24 +++++- drivers/leds/Kconfig | 7 -- drivers/leds/Makefile | 1 - drivers/leds/leds-spitz.c | 131 --------------------------------- 5 files changed, 27 insertions(+), 144 deletions(-) delete mode 100644 drivers/leds/leds-spitz.c (limited to 'drivers/leds/Makefile') diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h index e9b3d33daed..3e28394333e 100644 --- a/arch/arm/mach-pxa/include/mach/spitz.h +++ b/arch/arm/mach-pxa/include/mach/spitz.h @@ -101,8 +101,8 @@ #define SPITZ_SCP_JK_A SCOOP_GPCR_PA18 /* Low */ #define SPITZ_SCP_ADC_TEMP_ON SCOOP_GPCR_PA19 /* Low */ -#define SPITZ_SCP_IO_DIR (SPITZ_SCP_LED_GREEN | SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \ - SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_LED_ORANGE | \ +#define SPITZ_SCP_IO_DIR (SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \ + SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | \ SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON) #define SPITZ_SCP_IO_OUT (SPITZ_SCP_CHRG_ON | SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R) #define SPITZ_SCP_SUS_CLR (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON) @@ -131,11 +131,11 @@ #define SPITZ_SCP2_BACKLIGHT_ON SCOOP_GPCR_PA18 /* Low */ #define SPITZ_SCP2_MIC_BIAS SCOOP_GPCR_PA19 /* Low */ -#define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \ +#define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \ SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \ SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS) -#define SPITZ_SCP2_IO_OUT (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1) +#define SPITZ_SCP2_IO_OUT (SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1) #define SPITZ_SCP2_SUS_CLR (SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \ SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS) #define SPITZ_SCP2_SUS_SET (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1) diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 290008296e1..993a132ff97 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -255,9 +256,30 @@ static struct platform_device spitzkbd_device = { /* * Spitz LEDs */ +static struct gpio_led spitz_gpio_leds[] = { + { + .name = "spitz:amber:charge", + .default_trigger = "sharpsl-charge", + .gpio = SPITZ_GPIO_LED_ORANGE, + }, + { + .name = "spitz:green:hddactivity", + .default_trigger = "ide-disk", + .gpio = SPITZ_GPIO_LED_GREEN, + }, +}; + +static struct gpio_led_platform_data spitz_gpio_leds_info = { + .leds = spitz_gpio_leds, + .num_leds = ARRAY_SIZE(spitz_gpio_leds), +}; + static struct platform_device spitzled_device = { - .name = "spitz-led", + .name = "leds-gpio", .id = -1, + .dev = { + .platform_data = &spitz_gpio_leds_info, + }, }; #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 27c60daa73f..5b14262af01 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -31,13 +31,6 @@ config LEDS_LOCOMO This option enables support for the LEDs on Sharp Locomo. Zaurus models SL-5500 and SL-5600. -config LEDS_SPITZ - tristate "LED Support for the Sharp SL-Cxx00 series" - depends on LEDS_CLASS && PXA_SHARP_Cxx00 - help - This option enables support for the LEDs on Sharp Zaurus - SL-Cxx00 series (C1000, C3000, C3100). - config LEDS_S3C24XX tristate "LED Support for Samsung S3C24XX GPIO LEDs" depends on LEDS_CLASS && ARCH_S3C2410 diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 556f8d2e7bb..3a8e6a04363 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -7,7 +7,6 @@ obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o # LED Platform Drivers obj-$(CONFIG_LEDS_ATMEL_PWM) += leds-atmel-pwm.o obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o -obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o obj-$(CONFIG_LEDS_S3C24XX) += leds-s3c24xx.o obj-$(CONFIG_LEDS_AMS_DELTA) += leds-ams-delta.o obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o diff --git a/drivers/leds/leds-spitz.c b/drivers/leds/leds-spitz.c deleted file mode 100644 index 178831c64bf..00000000000 --- a/drivers/leds/leds-spitz.c +++ /dev/null @@ -1,131 +0,0 @@ -/* - * LED Triggers Core - * - * Copyright 2005-2006 Openedhand Ltd. - * - * Author: Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static void spitzled_amber_set(struct led_classdev *led_cdev, - enum led_brightness value) -{ - if (value) - set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_ORANGE); - else - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_ORANGE); -} - -static void spitzled_green_set(struct led_classdev *led_cdev, - enum led_brightness value) -{ - if (value) - set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN); - else - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN); -} - -static struct led_classdev spitz_amber_led = { - .name = "spitz:amber:charge", - .default_trigger = "sharpsl-charge", - .brightness_set = spitzled_amber_set, -}; - -static struct led_classdev spitz_green_led = { - .name = "spitz:green:hddactivity", - .default_trigger = "ide-disk", - .brightness_set = spitzled_green_set, -}; - -#ifdef CONFIG_PM -static int spitzled_suspend(struct platform_device *dev, pm_message_t state) -{ -#ifdef CONFIG_LEDS_TRIGGERS - if (spitz_amber_led.trigger && - strcmp(spitz_amber_led.trigger->name, "sharpsl-charge")) -#endif - led_classdev_suspend(&spitz_amber_led); - led_classdev_suspend(&spitz_green_led); - return 0; -} - -static int spitzled_resume(struct platform_device *dev) -{ - led_classdev_resume(&spitz_amber_led); - led_classdev_resume(&spitz_green_led); - return 0; -} -#endif - -static int spitzled_probe(struct platform_device *pdev) -{ - int ret; - - if (machine_is_akita()) { - spitz_green_led.name = "spitz:green:mail"; - spitz_green_led.default_trigger = "nand-disk"; - } - - ret = led_classdev_register(&pdev->dev, &spitz_amber_led); - if (ret < 0) - return ret; - - ret = led_classdev_register(&pdev->dev, &spitz_green_led); - if (ret < 0) - led_classdev_unregister(&spitz_amber_led); - - return ret; -} - -static int spitzled_remove(struct platform_device *pdev) -{ - led_classdev_unregister(&spitz_amber_led); - led_classdev_unregister(&spitz_green_led); - - return 0; -} - -static struct platform_driver spitzled_driver = { - .probe = spitzled_probe, - .remove = spitzled_remove, -#ifdef CONFIG_PM - .suspend = spitzled_suspend, - .resume = spitzled_resume, -#endif - .driver = { - .name = "spitz-led", - .owner = THIS_MODULE, - }, -}; - -static int __init spitzled_init(void) -{ - return platform_driver_register(&spitzled_driver); -} - -static void __exit spitzled_exit(void) -{ - platform_driver_unregister(&spitzled_driver); -} - -module_init(spitzled_init); -module_exit(spitzled_exit); - -MODULE_AUTHOR("Richard Purdie "); -MODULE_DESCRIPTION("Spitz LED driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:spitz-led"); -- cgit v1.2.3-70-g09d2