From 6e99e4582861578fb00d84d085f8f283569f51dd Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 10 Jul 2006 04:44:42 -0700 Subject: [PATCH] powerpc: fix trigger handling in the new irq code This patch slightly reworks the new irq code to fix a small design error. I removed the passing of the trigger to the map() calls entirely, it was not a good idea to have one call do two different things. It also fixes a couple of corner cases. Mapping a linux virtual irq to a physical irq now does only that. Setting the trigger is a different action which has a different call. The main changes are: - I no longer call host->ops->map() for an already mapped irq, I just return the virtual number that was already mapped. It was called before to give an opportunity to change the trigger, but that was causing issues as that could happen while the interrupt was in use by a device, and because of the trigger change, map would potentially muck around with things in a racy way. That was causing much burden on a given's controller implementation of map() to get it right. This is much simpler now. map() is only called on the initial mapping of an irq, meaning that you know that this irq is _not_ being used. You can initialize the hardware if you want (though you don't have to). - Controllers that can handle different type of triggers (level/edge/etc...) now implement the standard irq_chip->set_type() call as defined by the generic code. That means that you can use the standard set_irq_type() to configure an irq line manually if you wish or (though I don't like that interface), pass explicit trigger flags to request_irq() as defined by the generic kernel interfaces. Also, using those interfaces guarantees that your controller set_type callback is called with the descriptor lock held, thus providing locking against activity on the same interrupt (including mask/unmask/etc...) automatically. A result is that, for example, MPIC's own map() implementation calls irq_set_type(NONE) to configure the hardware to the default triggers. - To allow the above, the irq_map array entry for the new mapped interrupt is now set before map() callback is called for the controller. - The irq_create_of_mapping() (also used by irq_of_parse_and_map()) function for mapping interrupts from the device-tree now also call the separate set_irq_type(), and only does so if there is a change in the trigger type. - While I was at it, I changed pci_read_irq_line() (which is the helper I would expect most archs to use in their pcibios_fixup() to get the PCI interrupt routing from the device tree) to also handle a fallback when the DT mapping fails consisting of reading the PCI_INTERRUPT_PIN to know wether the device has an interrupt at all, and the the PCI_INTERRUPT_LINE to get an interrupt number from the device. That number is then mapped using the default controller, and the trigger is set to level low. That default behaviour works for several platforms that don't have a proper interrupt tree like Pegasos. If it doesn't work for your platform, then either provide a proper interrupt tree from the firmware so that fallback isn't needed, or don't call pci_read_irq_line() - Add back a bit that got dropped by my main rework patch for properly clearing pending IPIs on pSeries when using a kexec Signed-off-by: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/macintosh/macio_asic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/macintosh') diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c index 80c0c665b5f..82657bc86d1 100644 --- a/drivers/macintosh/macio_asic.c +++ b/drivers/macintosh/macio_asic.c @@ -330,7 +330,7 @@ static void macio_create_fixup_irq(struct macio_dev *dev, int index, { unsigned int irq; - irq = irq_create_mapping(NULL, line, 0); + irq = irq_create_mapping(NULL, line); if (irq != NO_IRQ) { dev->interrupt[index].start = irq; dev->interrupt[index].flags = IORESOURCE_IRQ; -- cgit v1.2.3-70-g09d2 From f620753b9584558cd3bcc1712fca16663aacdce4 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 10 Jul 2006 04:44:44 -0700 Subject: [PATCH] powerpc: fix SMU driver interrupt mapping The SMU driver tries to map an interrupt from the device-tree before the interrupt controllers in the machine have been enumerated. This doesn't work properly and cause machines like the Quad g5 to fail booting later on when some drivers waits endlessly for an SMU request to complete. This is the second problem preventing boot on the Quad g5. This fixes it and also makes the SMU driver a bit more resilient to not having an interrupt. Signed-off-by: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/macintosh/smu.c | 53 +++++++++++++++++++++++++++++++++++-------------- 1 file changed, 38 insertions(+), 15 deletions(-) (limited to 'drivers/macintosh') diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c index f139a74696f..00ef4689814 100644 --- a/drivers/macintosh/smu.c +++ b/drivers/macintosh/smu.c @@ -75,9 +75,11 @@ struct smu_device { struct of_device *of_dev; int doorbell; /* doorbell gpio */ u32 __iomem *db_buf; /* doorbell buffer */ - int db_irq; + struct device_node *db_node; + unsigned int db_irq; int msg; - int msg_irq; + struct device_node *msg_node; + unsigned int msg_irq; struct smu_cmd_buf *cmd_buf; /* command buffer virtual */ u32 cmd_buf_abs; /* command buffer absolute */ struct list_head cmd_list; @@ -93,6 +95,7 @@ struct smu_device { */ static struct smu_device *smu; static DEFINE_MUTEX(smu_part_access); +static int smu_irq_inited; static void smu_i2c_retry(unsigned long data); @@ -257,6 +260,10 @@ int smu_queue_cmd(struct smu_cmd *cmd) smu_start_cmd(); spin_unlock_irqrestore(&smu->lock, flags); + /* Workaround for early calls when irq isn't available */ + if (!smu_irq_inited || smu->db_irq == NO_IRQ) + smu_spinwait_cmd(cmd); + return 0; } EXPORT_SYMBOL(smu_queue_cmd); @@ -478,14 +485,15 @@ int __init smu_init (void) smu->cmd_buf_abs = (u32)smu_cmdbuf_abs; smu->cmd_buf = (struct smu_cmd_buf *)abs_to_virt(smu_cmdbuf_abs); - np = of_find_node_by_name(NULL, "smu-doorbell"); - if (np == NULL) { + smu->db_node = of_find_node_by_name(NULL, "smu-doorbell"); + if (smu->db_node == NULL) { printk(KERN_ERR "SMU: Can't find doorbell GPIO !\n"); goto fail; } - data = (u32 *)get_property(np, "reg", NULL); + data = (u32 *)get_property(smu->db_node, "reg", NULL); if (data == NULL) { - of_node_put(np); + of_node_put(smu->db_node); + smu->db_node = NULL; printk(KERN_ERR "SMU: Can't find doorbell GPIO address !\n"); goto fail; } @@ -497,25 +505,21 @@ int __init smu_init (void) smu->doorbell = *data; if (smu->doorbell < 0x50) smu->doorbell += 0x50; - smu->db_irq = irq_of_parse_and_map(np, 0); - - of_node_put(np); /* Now look for the smu-interrupt GPIO */ do { - np = of_find_node_by_name(NULL, "smu-interrupt"); - if (np == NULL) + smu->msg_node = of_find_node_by_name(NULL, "smu-interrupt"); + if (smu->msg_node == NULL) break; - data = (u32 *)get_property(np, "reg", NULL); + data = (u32 *)get_property(smu->msg_node, "reg", NULL); if (data == NULL) { - of_node_put(np); + of_node_put(smu->msg_node); + smu->msg_node = NULL; break; } smu->msg = *data; if (smu->msg < 0x50) smu->msg += 0x50; - smu->msg_irq = irq_of_parse_and_map(np, 0); - of_node_put(np); } while(0); /* Doorbell buffer is currently hard-coded, I didn't find a proper @@ -547,6 +551,19 @@ static int smu_late_init(void) smu->i2c_timer.function = smu_i2c_retry; smu->i2c_timer.data = (unsigned long)smu; + if (smu->db_node) { + smu->db_irq = irq_of_parse_and_map(smu->db_node, 0); + if (smu->db_irq == NO_IRQ) + printk(KERN_ERR "smu: failed to map irq for node %s\n", + smu->db_node->full_name); + } + if (smu->msg_node) { + smu->msg_irq = irq_of_parse_and_map(smu->msg_node, 0); + if (smu->msg_irq == NO_IRQ) + printk(KERN_ERR "smu: failed to map irq for node %s\n", + smu->msg_node->full_name); + } + /* * Try to request the interrupts */ @@ -571,6 +588,7 @@ static int smu_late_init(void) } } + smu_irq_inited = 1; return 0; } /* This has to be before arch_initcall as the low i2c stuff relies on the @@ -742,6 +760,11 @@ static void smu_i2c_low_completion(struct smu_cmd *scmd, void *misc) if (fail && --cmd->retries > 0) { DPRINTK("SMU: i2c failure, starting timer...\n"); BUG_ON(cmd != smu->cmd_i2c_cur); + if (!smu_irq_inited) { + mdelay(5); + smu_i2c_retry(0); + return; + } mod_timer(&smu->i2c_timer, jiffies + msecs_to_jiffies(5)); return; } -- cgit v1.2.3-70-g09d2 From e01af0384f54023b4548b7742952da2ffcafd4cd Mon Sep 17 00:00:00 2001 From: Michael Hanselmann Date: Mon, 10 Jul 2006 04:44:45 -0700 Subject: [PATCH] powermac: Combined fixes for backlight code This patch fixes several problems: - pmac_backlight_key() is called under interrupt context, and therefore can't use mutexes or semaphores, so defer the backlight level for later, as it's not critical (original code by Aristeu S. Rozanski F. ). - Add exports for functions that might be called from modules - Fix Kconfig depdencies on PMAC_BACKLIGHT. - Fix locking issues on calls from inside the driver (reported by Aristeu S. Rozanski F., too) - Fix wrong calculation of backlight values in some of the drivers - Replace pmac_backlight_key_up/down by inline functions [akpm@osdl.org: fix function prototypes] Signed-off-by: Michael Hanselmann Acked-by: Aristeu S. Rozanski F. Acked-by: Rene Nussbaumer Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/platforms/powermac/backlight.c | 31 ++++++++++---- drivers/macintosh/Kconfig | 5 ++- drivers/video/aty/aty128fb.c | 66 +++++++++++++++-------------- drivers/video/aty/atyfb_base.c | 53 +++++++++++++---------- drivers/video/chipsfb.c | 3 +- drivers/video/nvidia/nv_backlight.c | 32 ++++++++++++-- drivers/video/nvidia/nv_proto.h | 2 + drivers/video/nvidia/nvidia.c | 11 +---- drivers/video/riva/fbdev.c | 44 +++++++++++++------ include/asm-powerpc/backlight.h | 12 ++++-- 10 files changed, 162 insertions(+), 97 deletions(-) (limited to 'drivers/macintosh') diff --git a/arch/powerpc/platforms/powermac/backlight.c b/arch/powerpc/platforms/powermac/backlight.c index 69f65e215a5..74eed6b74cd 100644 --- a/arch/powerpc/platforms/powermac/backlight.c +++ b/arch/powerpc/platforms/powermac/backlight.c @@ -15,6 +15,15 @@ #define OLD_BACKLIGHT_MAX 15 +static void pmac_backlight_key_worker(void *data); +static DECLARE_WORK(pmac_backlight_key_work, pmac_backlight_key_worker, NULL); + +/* Although this variable is used in interrupt context, it makes no sense to + * protect it. No user is able to produce enough key events per second and + * notice the errors that might happen. + */ +static int pmac_backlight_key_queued; + /* Protect the pmac_backlight variable */ DEFINE_MUTEX(pmac_backlight_mutex); @@ -71,7 +80,7 @@ int pmac_backlight_curve_lookup(struct fb_info *info, int value) return level; } -static void pmac_backlight_key(int direction) +static void pmac_backlight_key_worker(void *data) { mutex_lock(&pmac_backlight_mutex); if (pmac_backlight) { @@ -82,7 +91,8 @@ static void pmac_backlight_key(int direction) props = pmac_backlight->props; brightness = props->brightness + - ((direction?-1:1) * (props->max_brightness / 15)); + ((pmac_backlight_key_queued?-1:1) * + (props->max_brightness / 15)); if (brightness < 0) brightness = 0; @@ -97,14 +107,13 @@ static void pmac_backlight_key(int direction) mutex_unlock(&pmac_backlight_mutex); } -void pmac_backlight_key_up() +void pmac_backlight_key(int direction) { - pmac_backlight_key(0); -} - -void pmac_backlight_key_down() -{ - pmac_backlight_key(1); + /* we can receive multiple interrupts here, but the scheduled work + * will run only once, with the last value + */ + pmac_backlight_key_queued = direction; + schedule_work(&pmac_backlight_key_work); } int pmac_backlight_set_legacy_brightness(int brightness) @@ -157,3 +166,7 @@ int pmac_backlight_get_legacy_brightness() return result; } + +EXPORT_SYMBOL_GPL(pmac_backlight); +EXPORT_SYMBOL_GPL(pmac_backlight_mutex); +EXPORT_SYMBOL_GPL(pmac_has_backlight_type); diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index 54f3f6b94ef..f5fe7fb4b3a 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -113,7 +113,10 @@ config PMAC_MEDIABAY config PMAC_BACKLIGHT bool "Backlight control for LCD screens" - depends on ADB_PMU && (BROKEN || !PPC64) + depends on ADB_PMU && FB = y && (BROKEN || !PPC64) + select FB_BACKLIGHT + select BACKLIGHT_CLASS_DEVICE + select BACKLIGHT_LCD_SUPPORT help Say Y here to enable Macintosh specific extensions of the generic backlight code. With this enabled, the brightness keys on older diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c index 1006f125fcc..c64a717e2d4 100644 --- a/drivers/video/aty/aty128fb.c +++ b/drivers/video/aty/aty128fb.c @@ -455,6 +455,7 @@ static void do_wait_for_fifo(u16 entries, struct aty128fb_par *par); static void wait_for_fifo(u16 entries, struct aty128fb_par *par); static void wait_for_idle(struct aty128fb_par *par); static u32 depth_to_dst(u32 depth); +static void aty128_bl_set_power(struct fb_info *info, int power); #define BIOS_IN8(v) (readb(bios + (v))) #define BIOS_IN16(v) (readb(bios + (v)) | \ @@ -1257,25 +1258,11 @@ static void aty128_set_lcd_enable(struct aty128fb_par *par, int on) reg &= ~LVDS_DISPLAY_DIS; aty_st_le32(LVDS_GEN_CNTL, reg); #ifdef CONFIG_FB_ATY128_BACKLIGHT - mutex_lock(&info->bl_mutex); - if (info->bl_dev) { - down(&info->bl_dev->sem); - info->bl_dev->props->update_status(info->bl_dev); - up(&info->bl_dev->sem); - } - mutex_unlock(&info->bl_mutex); + aty128_bl_set_power(info, FB_BLANK_UNBLANK); #endif } else { #ifdef CONFIG_FB_ATY128_BACKLIGHT - mutex_lock(&info->bl_mutex); - if (info->bl_dev) { - down(&info->bl_dev->sem); - info->bl_dev->props->brightness = 0; - info->bl_dev->props->power = FB_BLANK_POWERDOWN; - info->bl_dev->props->update_status(info->bl_dev); - up(&info->bl_dev->sem); - } - mutex_unlock(&info->bl_mutex); + aty128_bl_set_power(info, FB_BLANK_POWERDOWN); #endif reg = aty_ld_le32(LVDS_GEN_CNTL); reg |= LVDS_DISPLAY_DIS; @@ -1702,6 +1689,7 @@ static int __devinit aty128fb_setup(char *options) static struct backlight_properties aty128_bl_data; +/* Call with fb_info->bl_mutex held */ static int aty128_bl_get_level_brightness(struct aty128fb_par *par, int level) { @@ -1709,10 +1697,8 @@ static int aty128_bl_get_level_brightness(struct aty128fb_par *par, int atylevel; /* Get and convert the value */ - mutex_lock(&info->bl_mutex); atylevel = MAX_LEVEL - (info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL); - mutex_unlock(&info->bl_mutex); if (atylevel < 0) atylevel = 0; @@ -1730,7 +1716,8 @@ static int aty128_bl_get_level_brightness(struct aty128fb_par *par, /* That one prevents proper CRT output with LCD off */ #undef BACKLIGHT_DAC_OFF -static int aty128_bl_update_status(struct backlight_device *bd) +/* Call with fb_info->bl_mutex held */ +static int __aty128_bl_update_status(struct backlight_device *bd) { struct aty128fb_par *par = class_get_devdata(&bd->class_dev); unsigned int reg = aty_ld_le32(LVDS_GEN_CNTL); @@ -1783,6 +1770,19 @@ static int aty128_bl_update_status(struct backlight_device *bd) return 0; } +static int aty128_bl_update_status(struct backlight_device *bd) +{ + struct aty128fb_par *par = class_get_devdata(&bd->class_dev); + struct fb_info *info = pci_get_drvdata(par->pdev); + int ret; + + mutex_lock(&info->bl_mutex); + ret = __aty128_bl_update_status(bd); + mutex_unlock(&info->bl_mutex); + + return ret; +} + static int aty128_bl_get_brightness(struct backlight_device *bd) { return bd->props->brightness; @@ -1795,6 +1795,16 @@ static struct backlight_properties aty128_bl_data = { .max_brightness = (FB_BACKLIGHT_LEVELS - 1), }; +static void aty128_bl_set_power(struct fb_info *info, int power) +{ + mutex_lock(&info->bl_mutex); + up(&info->bl_dev->sem); + info->bl_dev->props->power = power; + __aty128_bl_update_status(info->bl_dev); + down(&info->bl_dev->sem); + mutex_unlock(&info->bl_mutex); +} + static void aty128_bl_init(struct aty128fb_par *par) { struct fb_info *info = pci_get_drvdata(par->pdev); @@ -2197,12 +2207,8 @@ static int aty128fb_blank(int blank, struct fb_info *fb) return 0; #ifdef CONFIG_FB_ATY128_BACKLIGHT - if (machine_is(powermac) && blank) { - down(&fb->bl_dev->sem); - fb->bl_dev->props->power = FB_BLANK_POWERDOWN; - fb->bl_dev->props->update_status(fb->bl_dev); - up(&fb->bl_dev->sem); - } + if (machine_is(powermac) && blank) + aty128_bl_set_power(fb, FB_BLANK_POWERDOWN); #endif if (blank & FB_BLANK_VSYNC_SUSPEND) @@ -2218,14 +2224,12 @@ static int aty128fb_blank(int blank, struct fb_info *fb) aty128_set_crt_enable(par, par->crt_on && !blank); aty128_set_lcd_enable(par, par->lcd_on && !blank); } + #ifdef CONFIG_FB_ATY128_BACKLIGHT - if (machine_is(powermac) && !blank) { - down(&fb->bl_dev->sem); - fb->bl_dev->props->power = FB_BLANK_UNBLANK; - fb->bl_dev->props->update_status(fb->bl_dev); - up(&fb->bl_dev->sem); - } + if (machine_is(powermac) && !blank) + aty128_bl_set_power(fb, FB_BLANK_UNBLANK); #endif + return 0; } diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c index 0c9706746d7..1507d19f481 100644 --- a/drivers/video/aty/atyfb_base.c +++ b/drivers/video/aty/atyfb_base.c @@ -2129,15 +2129,14 @@ static int atyfb_pci_resume(struct pci_dev *pdev) static struct backlight_properties aty_bl_data; +/* Call with fb_info->bl_mutex held */ static int aty_bl_get_level_brightness(struct atyfb_par *par, int level) { struct fb_info *info = pci_get_drvdata(par->pdev); int atylevel; /* Get and convert the value */ - mutex_lock(&info->bl_mutex); atylevel = info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL; - mutex_unlock(&info->bl_mutex); if (atylevel < 0) atylevel = 0; @@ -2147,7 +2146,8 @@ static int aty_bl_get_level_brightness(struct atyfb_par *par, int level) return atylevel; } -static int aty_bl_update_status(struct backlight_device *bd) +/* Call with fb_info->bl_mutex held */ +static int __aty_bl_update_status(struct backlight_device *bd) { struct atyfb_par *par = class_get_devdata(&bd->class_dev); unsigned int reg = aty_ld_lcd(LCD_MISC_CNTL, par); @@ -2172,6 +2172,19 @@ static int aty_bl_update_status(struct backlight_device *bd) return 0; } +static int aty_bl_update_status(struct backlight_device *bd) +{ + struct atyfb_par *par = class_get_devdata(&bd->class_dev); + struct fb_info *info = pci_get_drvdata(par->pdev); + int ret; + + mutex_lock(&info->bl_mutex); + ret = __aty_bl_update_status(bd); + mutex_unlock(&info->bl_mutex); + + return ret; +} + static int aty_bl_get_brightness(struct backlight_device *bd) { return bd->props->brightness; @@ -2184,6 +2197,16 @@ static struct backlight_properties aty_bl_data = { .max_brightness = (FB_BACKLIGHT_LEVELS - 1), }; +static void aty_bl_set_power(struct fb_info *info, int power) +{ + mutex_lock(&info->bl_mutex); + up(&info->bl_dev->sem); + info->bl_dev->props->power = power; + __aty_bl_update_status(info->bl_dev); + down(&info->bl_dev->sem); + mutex_unlock(&info->bl_mutex); +} + static void aty_bl_init(struct atyfb_par *par) { struct fb_info *info = pci_get_drvdata(par->pdev); @@ -2790,16 +2813,8 @@ static int atyfb_blank(int blank, struct fb_info *info) return 0; #ifdef CONFIG_PMAC_BACKLIGHT - if (machine_is(powermac) && blank > FB_BLANK_NORMAL) { - mutex_lock(&info->bl_mutex); - if (info->bl_dev) { - down(&info->bl_dev->sem); - info->bl_dev->props->power = FB_BLANK_POWERDOWN; - info->bl_dev->props->update_status(info->bl_dev); - up(&info->bl_dev->sem); - } - mutex_unlock(&info->bl_mutex); - } + if (machine_is(powermac) && blank > FB_BLANK_NORMAL) + aty_bl_set_power(info, FB_BLANK_POWERDOWN); #elif defined(CONFIG_FB_ATY_GENERIC_LCD) if (par->lcd_table && blank > FB_BLANK_NORMAL && (aty_ld_lcd(LCD_GEN_CNTL, par) & LCD_ON)) { @@ -2830,16 +2845,8 @@ static int atyfb_blank(int blank, struct fb_info *info) aty_st_le32(CRTC_GEN_CNTL, gen_cntl, par); #ifdef CONFIG_PMAC_BACKLIGHT - if (machine_is(powermac) && blank <= FB_BLANK_NORMAL) { - mutex_lock(&info->bl_mutex); - if (info->bl_dev) { - down(&info->bl_dev->sem); - info->bl_dev->props->power = FB_BLANK_UNBLANK; - info->bl_dev->props->update_status(info->bl_dev); - up(&info->bl_dev->sem); - } - mutex_unlock(&info->bl_mutex); - } + if (machine_is(powermac) && blank <= FB_BLANK_NORMAL) + aty_bl_set_power(info, FB_BLANK_UNBLANK); #elif defined(CONFIG_FB_ATY_GENERIC_LCD) if (par->lcd_table && blank <= FB_BLANK_NORMAL && (aty_ld_lcd(LCD_GEN_CNTL, par) & LCD_ON)) { diff --git a/drivers/video/chipsfb.c b/drivers/video/chipsfb.c index eba9d93ae36..73cb426bf2d 100644 --- a/drivers/video/chipsfb.c +++ b/drivers/video/chipsfb.c @@ -149,12 +149,11 @@ static int chipsfb_blank(int blank, struct fb_info *info) mutex_lock(&pmac_backlight_mutex); if (pmac_backlight) { - down(&pmac_backlight->sem); - /* used to disable backlight only for blank > 1, but it seems * useful at blank = 1 too (saves battery, extends backlight * life) */ + down(&pmac_backlight->sem); if (blank) pmac_backlight->props->power = FB_BLANK_POWERDOWN; else diff --git a/drivers/video/nvidia/nv_backlight.c b/drivers/video/nvidia/nv_backlight.c index 1c1c10c699c..b45f577094a 100644 --- a/drivers/video/nvidia/nv_backlight.c +++ b/drivers/video/nvidia/nv_backlight.c @@ -26,9 +26,11 @@ */ #define MIN_LEVEL 0x158 #define MAX_LEVEL 0x534 +#define LEVEL_STEP ((MAX_LEVEL - MIN_LEVEL) / FB_BACKLIGHT_MAX) static struct backlight_properties nvidia_bl_data; +/* Call with fb_info->bl_mutex held */ static int nvidia_bl_get_level_brightness(struct nvidia_par *par, int level) { @@ -36,9 +38,7 @@ static int nvidia_bl_get_level_brightness(struct nvidia_par *par, int nlevel; /* Get and convert the value */ - mutex_lock(&info->bl_mutex); - nlevel = info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL; - mutex_unlock(&info->bl_mutex); + nlevel = MIN_LEVEL + info->bl_curve[level] * LEVEL_STEP; if (nlevel < 0) nlevel = 0; @@ -50,7 +50,8 @@ static int nvidia_bl_get_level_brightness(struct nvidia_par *par, return nlevel; } -static int nvidia_bl_update_status(struct backlight_device *bd) +/* Call with fb_info->bl_mutex held */ +static int __nvidia_bl_update_status(struct backlight_device *bd) { struct nvidia_par *par = class_get_devdata(&bd->class_dev); u32 tmp_pcrt, tmp_pmc, fpcontrol; @@ -84,6 +85,19 @@ static int nvidia_bl_update_status(struct backlight_device *bd) return 0; } +static int nvidia_bl_update_status(struct backlight_device *bd) +{ + struct nvidia_par *par = class_get_devdata(&bd->class_dev); + struct fb_info *info = pci_get_drvdata(par->pci_dev); + int ret; + + mutex_lock(&info->bl_mutex); + ret = __nvidia_bl_update_status(bd); + mutex_unlock(&info->bl_mutex); + + return ret; +} + static int nvidia_bl_get_brightness(struct backlight_device *bd) { return bd->props->brightness; @@ -96,6 +110,16 @@ static struct backlight_properties nvidia_bl_data = { .max_brightness = (FB_BACKLIGHT_LEVELS - 1), }; +void nvidia_bl_set_power(struct fb_info *info, int power) +{ + mutex_lock(&info->bl_mutex); + up(&info->bl_dev->sem); + info->bl_dev->props->power = power; + __nvidia_bl_update_status(info->bl_dev); + down(&info->bl_dev->sem); + mutex_unlock(&info->bl_mutex); +} + void nvidia_bl_init(struct nvidia_par *par) { struct fb_info *info = pci_get_drvdata(par->pci_dev); diff --git a/drivers/video/nvidia/nv_proto.h b/drivers/video/nvidia/nv_proto.h index 6fba656cd56..86127101765 100644 --- a/drivers/video/nvidia/nv_proto.h +++ b/drivers/video/nvidia/nv_proto.h @@ -68,9 +68,11 @@ extern u8 byte_rev[256]; #ifdef CONFIG_FB_NVIDIA_BACKLIGHT extern void nvidia_bl_init(struct nvidia_par *par); extern void nvidia_bl_exit(struct nvidia_par *par); +extern void nvidia_bl_set_power(struct fb_info *info, int power); #else static inline void nvidia_bl_init(struct nvidia_par *par) {} static inline void nvidia_bl_exit(struct nvidia_par *par) {} +static inline void nvidia_bl_set_power(struct fb_info *info, int power) {} #endif #endif /* __NV_PROTO_H__ */ diff --git a/drivers/video/nvidia/nvidia.c b/drivers/video/nvidia/nvidia.c index ef58c382550..9f2066f0745 100644 --- a/drivers/video/nvidia/nvidia.c +++ b/drivers/video/nvidia/nvidia.c @@ -932,16 +932,7 @@ static int nvidiafb_blank(int blank, struct fb_info *info) NVWriteSeq(par, 0x01, tmp); NVWriteCrtc(par, 0x1a, vesa); -#ifdef CONFIG_FB_NVIDIA_BACKLIGHT - mutex_lock(&info->bl_mutex); - if (info->bl_dev) { - down(&info->bl_dev->sem); - info->bl_dev->props->power = blank; - info->bl_dev->props->update_status(info->bl_dev); - up(&info->bl_dev->sem); - } - mutex_unlock(&info->bl_mutex); -#endif + nvidia_bl_set_power(info, blank); NVTRACE_LEAVE(); diff --git a/drivers/video/riva/fbdev.c b/drivers/video/riva/fbdev.c index baf494cecc1..33dddbae542 100644 --- a/drivers/video/riva/fbdev.c +++ b/drivers/video/riva/fbdev.c @@ -277,9 +277,11 @@ static const struct riva_regs reg_template = { */ #define MIN_LEVEL 0x158 #define MAX_LEVEL 0x534 +#define LEVEL_STEP ((MAX_LEVEL - MIN_LEVEL) / FB_BACKLIGHT_MAX) static struct backlight_properties riva_bl_data; +/* Call with fb_info->bl_mutex held */ static int riva_bl_get_level_brightness(struct riva_par *par, int level) { @@ -287,9 +289,7 @@ static int riva_bl_get_level_brightness(struct riva_par *par, int nlevel; /* Get and convert the value */ - mutex_lock(&info->bl_mutex); - nlevel = info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL; - mutex_unlock(&info->bl_mutex); + nlevel = MIN_LEVEL + info->bl_curve[level] * LEVEL_STEP; if (nlevel < 0) nlevel = 0; @@ -301,7 +301,8 @@ static int riva_bl_get_level_brightness(struct riva_par *par, return nlevel; } -static int riva_bl_update_status(struct backlight_device *bd) +/* Call with fb_info->bl_mutex held */ +static int __riva_bl_update_status(struct backlight_device *bd) { struct riva_par *par = class_get_devdata(&bd->class_dev); U032 tmp_pcrt, tmp_pmc; @@ -326,6 +327,19 @@ static int riva_bl_update_status(struct backlight_device *bd) return 0; } +static int riva_bl_update_status(struct backlight_device *bd) +{ + struct riva_par *par = class_get_devdata(&bd->class_dev); + struct fb_info *info = pci_get_drvdata(par->pdev); + int ret; + + mutex_lock(&info->bl_mutex); + ret = __riva_bl_update_status(bd); + mutex_unlock(&info->bl_mutex); + + return ret; +} + static int riva_bl_get_brightness(struct backlight_device *bd) { return bd->props->brightness; @@ -338,6 +352,16 @@ static struct backlight_properties riva_bl_data = { .max_brightness = (FB_BACKLIGHT_LEVELS - 1), }; +static void riva_bl_set_power(struct fb_info *info, int power) +{ + mutex_lock(&info->bl_mutex); + up(&info->bl_dev->sem); + info->bl_dev->props->power = power; + __riva_bl_update_status(info->bl_dev); + down(&info->bl_dev->sem); + mutex_unlock(&info->bl_mutex); +} + static void riva_bl_init(struct riva_par *par) { struct fb_info *info = pci_get_drvdata(par->pdev); @@ -418,6 +442,7 @@ static void riva_bl_exit(struct riva_par *par) #else static inline void riva_bl_init(struct riva_par *par) {} static inline void riva_bl_exit(struct riva_par *par) {} +static inline void riva_bl_set_power(struct fb_info *info, int power) {} #endif /* CONFIG_FB_RIVA_BACKLIGHT */ /* ------------------------------------------------------------------------- * @@ -1336,16 +1361,7 @@ static int rivafb_blank(int blank, struct fb_info *info) SEQout(par, 0x01, tmp); CRTCout(par, 0x1a, vesa); -#ifdef CONFIG_FB_RIVA_BACKLIGHT - mutex_lock(&info->bl_mutex); - if (info->bl_dev) { - down(&info->bl_dev->sem); - info->bl_dev->props->power = blank; - info->bl_dev->props->update_status(info->bl_dev); - up(&info->bl_dev->sem); - } - mutex_unlock(&info->bl_mutex); -#endif + riva_bl_set_power(info, blank); NVTRACE_LEAVE(); diff --git a/include/asm-powerpc/backlight.h b/include/asm-powerpc/backlight.h index a5e9e656e33..58d4b6f8d82 100644 --- a/include/asm-powerpc/backlight.h +++ b/include/asm-powerpc/backlight.h @@ -16,13 +16,19 @@ extern struct backlight_device *pmac_backlight; extern struct mutex pmac_backlight_mutex; -extern void pmac_backlight_calc_curve(struct fb_info*); extern int pmac_backlight_curve_lookup(struct fb_info *info, int value); extern int pmac_has_backlight_type(const char *type); -extern void pmac_backlight_key_up(void); -extern void pmac_backlight_key_down(void); +extern void pmac_backlight_key(int direction); +static inline void pmac_backlight_key_up(void) +{ + pmac_backlight_key(0); +} +static inline void pmac_backlight_key_down(void) +{ + pmac_backlight_key(1); +} extern int pmac_backlight_set_legacy_brightness(int brightness); extern int pmac_backlight_get_legacy_brightness(void); -- cgit v1.2.3-70-g09d2 From d1a8df9136ff55e554e11ce65854c282965be8f5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 3 Jul 2006 14:28:14 +0200 Subject: [POWERPC] fix up front-LED Kconfig This patch fixes the front-LED Kconfig issues I introduced while creating it. Apparently having a dependency isn't enough to have the select not evaluated or something like that. The patch also changes the default configuration for pmac32 select the default for the LED to be the IDE trigger. While I was at it, I completely updated the defconfig and also added snd-aoa to it. Signed-off-by: Johannes Berg Signed-off-by: Paul Mackerras --- arch/powerpc/configs/pmac32_defconfig | 112 +++++++++++++++++++++++++++++----- drivers/ide/Kconfig | 14 ----- drivers/macintosh/Kconfig | 9 +++ drivers/macintosh/via-pmu-led.c | 2 +- 4 files changed, 106 insertions(+), 31 deletions(-) (limited to 'drivers/macintosh') diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig index addc79381c3..3545af9896a 100644 --- a/arch/powerpc/configs/pmac32_defconfig +++ b/arch/powerpc/configs/pmac32_defconfig @@ -1,16 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17-rc5 -# Mon May 29 14:47:49 2006 +# Linux kernel version: 2.6.17 +# Mon Jul 3 14:20:49 2006 # # CONFIG_PPC64 is not set CONFIG_PPC32=y CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y @@ -29,6 +31,7 @@ CONFIG_CLASSIC32=y # CONFIG_PPC_82xx is not set # CONFIG_PPC_83xx is not set # CONFIG_PPC_85xx is not set +# CONFIG_PPC_86xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_8xx is not set @@ -39,6 +42,7 @@ CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -72,10 +76,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -119,6 +125,9 @@ CONFIG_PPC_MULTIPLATFORM=y # CONFIG_APUS is not set # CONFIG_PPC_CHRP is not set CONFIG_PPC_PMAC=y +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_MPIC=y # CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set @@ -154,6 +163,7 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # CONFIG_KEXEC is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y @@ -164,6 +174,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set CONFIG_PM=y @@ -182,6 +193,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set # CONFIG_PCI_DEBUG is not set # @@ -256,6 +268,8 @@ CONFIG_INET_ESP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -268,6 +282,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -292,9 +307,11 @@ CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATE=m +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m @@ -313,6 +330,7 @@ CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m CONFIG_IP_NF_PPTP=m CONFIG_IP_NF_H323=m +# CONFIG_IP_NF_SIP is not set # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m @@ -457,6 +475,7 @@ CONFIG_IRTTY_SIR=m # CONFIG_ALI_FIR is not set # CONFIG_VLSI_FIR is not set # CONFIG_VIA_FIR is not set +# CONFIG_MCS_FIR is not set CONFIG_BT=m CONFIG_BT_L2CAP=m CONFIG_BT_SCO=m @@ -500,6 +519,7 @@ CONFIG_WIRELESS_EXT=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker @@ -600,7 +620,6 @@ CONFIG_BLK_DEV_PDC202XX_NEW=y CONFIG_BLK_DEV_IDE_PMAC=y CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y CONFIG_BLK_DEV_IDEDMA_PMAC=y -CONFIG_BLK_DEV_IDE_PMAC_BLINK=y # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set @@ -661,6 +680,7 @@ CONFIG_SCSI_AIC7XXX_OLD=m # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -705,9 +725,7 @@ CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID10=m -CONFIG_MD_RAID5=m -CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_RAID6=m +# CONFIG_MD_RAID456 is not set CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=m @@ -750,7 +768,6 @@ CONFIG_IEEE1394_OHCI1394=m # CONFIG_IEEE1394_VIDEO1394=m CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set # CONFIG_IEEE1394_ETH1394 is not set CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_RAWIO=m @@ -766,9 +783,12 @@ CONFIG_IEEE1394_RAWIO=m CONFIG_ADB=y CONFIG_ADB_CUDA=y CONFIG_ADB_PMU=y +CONFIG_ADB_PMU_LED=y +CONFIG_ADB_PMU_LED_IDE=y CONFIG_PMAC_APM_EMU=m CONFIG_PMAC_MEDIABAY=y CONFIG_PMAC_BACKLIGHT=y +CONFIG_PMAC_BACKLIGHT_LEGACY=y CONFIG_INPUT_ADBHID=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_THERM_WINDTUNNEL=m @@ -858,6 +878,7 @@ CONFIG_PCNET32=y # CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set # # Token Ring devices @@ -908,6 +929,7 @@ CONFIG_APPLE_AIRPORT=m # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support # CONFIG_PRISM54=m +# CONFIG_USB_ZD1201 is not set # CONFIG_HOSTAP is not set CONFIG_NET_WIRELESS=y @@ -998,6 +1020,7 @@ CONFIG_SERIO=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -1029,6 +1052,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -1040,6 +1064,7 @@ CONFIG_GEN_RTC=y # Ftape, the floppy tape device driver # CONFIG_AGP=m +# CONFIG_AGP_SIS is not set # CONFIG_AGP_VIA is not set CONFIG_AGP_UNINORTH=m CONFIG_DRM=m @@ -1092,6 +1117,7 @@ CONFIG_I2C_ALGOBIT=y CONFIG_I2C_POWERMAC=y # CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set @@ -1156,12 +1182,13 @@ CONFIG_VIDEO_V4L2=y # # Graphics support # +# CONFIG_FIRMWARE_EDID is not set CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_MACMODES=y -CONFIG_FB_FIRMWARE_EDID=y +CONFIG_FB_BACKLIGHT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set @@ -1178,6 +1205,7 @@ CONFIG_FB_IMSTT=y # CONFIG_FB_S1D13XXX is not set CONFIG_FB_NVIDIA=y CONFIG_FB_NVIDIA_I2C=y +CONFIG_FB_NVIDIA_BACKLIGHT=y # CONFIG_FB_RIVA is not set CONFIG_FB_MATROX=y CONFIG_FB_MATROX_MILLENIUM=y @@ -1187,12 +1215,15 @@ CONFIG_FB_MATROX_MYSTIQUE=y # CONFIG_FB_MATROX_MULTIHEAD is not set CONFIG_FB_RADEON=y CONFIG_FB_RADEON_I2C=y +CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_RADEON_DEBUG is not set CONFIG_FB_ATY128=y +CONFIG_FB_ATY128_BACKLIGHT=y CONFIG_FB_ATY=y CONFIG_FB_ATY_CT=y # CONFIG_FB_ATY_GENERIC_LCD is not set CONFIG_FB_ATY_GX=y +CONFIG_FB_ATY_BACKLIGHT=y # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set @@ -1221,7 +1252,11 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=m +CONFIG_LCD_DEVICE=y # # Sound @@ -1278,6 +1313,18 @@ CONFIG_SND_DUMMY=m # CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1314,6 +1361,17 @@ CONFIG_SND_DUMMY=m CONFIG_SND_POWERMAC=m CONFIG_SND_POWERMAC_AUTO_DRC=y +# +# Apple Onboard Audio driver +# +CONFIG_SND_AOA=m +CONFIG_SND_AOA_FABRIC_LAYOUT=m +CONFIG_SND_AOA_ONYX=m +CONFIG_SND_AOA_TAS=m +CONFIG_SND_AOA_TOONIE=m +CONFIG_SND_AOA_SOUNDBUS=m +CONFIG_SND_AOA_SOUNDBUS_I2S=m + # # USB devices # @@ -1355,6 +1413,7 @@ CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN is not set @@ -1431,7 +1490,6 @@ CONFIG_USB_NET_NET1080=m # CONFIG_USB_NET_RNDIS_HOST is not set # CONFIG_USB_NET_CDC_SUBSET is not set CONFIG_USB_NET_ZAURUS=m -# CONFIG_USB_ZD1201 is not set CONFIG_USB_MON=y # @@ -1499,10 +1557,12 @@ CONFIG_USB_EZUSB=y # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set +# CONFIG_USB_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +CONFIG_USB_APPLEDISPLAY=m # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set @@ -1524,7 +1584,8 @@ CONFIG_USB_EZUSB=y # # LED devices # -# CONFIG_NEW_LEDS is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y # # LED drivers @@ -1533,6 +1594,10 @@ CONFIG_USB_EZUSB=y # # LED Triggers # +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +CONFIG_LEDS_TRIGGER_IDE_DISK=y +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set # # InfiniBand support @@ -1548,6 +1613,19 @@ CONFIG_USB_EZUSB=y # # CONFIG_RTC_CLASS is not set +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + # # File systems # @@ -1569,6 +1647,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -1649,6 +1728,7 @@ CONFIG_RPCSEC_GSS_KRB5=y CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_CIFS is not set +# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1732,6 +1812,7 @@ CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m +CONFIG_PLIST=y # # Instrumentation Support @@ -1744,12 +1825,15 @@ CONFIG_OPROFILE=y # # CONFIG_PRINTK_TIME is not set # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1763,11 +1847,7 @@ CONFIG_XMON=y CONFIG_XMON_DEFAULT=y # CONFIG_BDI_SWITCH is not set CONFIG_BOOTX_TEXT=y -# CONFIG_PPC_EARLY_DEBUG_LPAR is not set -# CONFIG_PPC_EARLY_DEBUG_G5 is not set -# CONFIG_PPC_EARLY_DEBUG_RTAS is not set -# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set -# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set +# CONFIG_PPC_EARLY_DEBUG is not set # # Security options diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index d1266fe2d1a..53bba41f29b 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -773,20 +773,6 @@ config BLK_DEV_IDEDMA_PMAC to transfer data to and from memory. Saying Y is safe and improves performance. -config BLK_DEV_IDE_PMAC_BLINK - bool "Blink laptop LED on drive activity (DEPRECATED)" - depends on BLK_DEV_IDE_PMAC && ADB_PMU - select ADB_PMU_LED - select LEDS_TRIGGERS - select LEDS_TRIGGER_IDE_DISK - help - This option enables the use of the sleep LED as a hard drive - activity LED. - This option is deprecated, it only selects ADB_PMU_LED and - LEDS_TRIGGER_IDE_DISK and changes the code in the new led class - device to default to the ide-disk trigger (which should be set - from userspace via sysfs). - config BLK_DEV_IDE_SWARM tristate "IDE for Sibyte evaluation boards" depends on SIBYTE_SB1xxx_SOC diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index f5fe7fb4b3a..f18c956fd59 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -90,6 +90,15 @@ config ADB_PMU_LED and the ide-disk LED trigger and configure appropriately through sysfs. +config ADB_PMU_LED_IDE + bool "Use front LED as IDE LED by default" + depends on ADB_PMU_LED + select LEDS_TRIGGERS + select LEDS_TRIGGER_IDE_DISK + help + This option makes the front LED default to the IDE trigger + so that it blinks on IDE activity. + config PMAC_SMU bool "Support for SMU based PowerMacs" depends on PPC_PMAC64 diff --git a/drivers/macintosh/via-pmu-led.c b/drivers/macintosh/via-pmu-led.c index af8375ed0f5..5189d5454b1 100644 --- a/drivers/macintosh/via-pmu-led.c +++ b/drivers/macintosh/via-pmu-led.c @@ -74,7 +74,7 @@ static void pmu_led_set(struct led_classdev *led_cdev, static struct led_classdev pmu_led = { .name = "pmu-front-led", -#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK +#ifdef CONFIG_ADB_PMU_LED_IDE .default_trigger = "ide-disk", #endif .brightness_set = pmu_led_set, -- cgit v1.2.3-70-g09d2 From 8279d2e6062673f31c59ad9e2104024123154267 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 6 Jul 2006 18:03:06 +1000 Subject: [POWERPC] Xserve G5 thermal control fixes The thermal control for the Xserve G5s had a few issues. For one, the way to program the RPM fans speeds into the FCU is different between it and the desktop models, which I didn't figure out until recently, and it was missing a control loop for the slots fan, running it too fast. Both of those problems were causing the machine to be much more noisy than necessary. This patch also changes the fixed value of the slots fan for desktop G5s to 40% instead of 50%. It seems to still have a pretty good airflow that way and is much less noisy. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- drivers/macintosh/therm_pm72.c | 218 ++++++++++++++++++++++++++++++++++++++--- drivers/macintosh/therm_pm72.h | 33 ++++++- 2 files changed, 234 insertions(+), 17 deletions(-) (limited to 'drivers/macintosh') diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c index c1fe0b368f7..20bf67244e2 100644 --- a/drivers/macintosh/therm_pm72.c +++ b/drivers/macintosh/therm_pm72.c @@ -95,6 +95,17 @@ * - Use min/max macros here or there * - Latest darwin updated U3H min fan speed to 20% PWM * + * July. 06, 2006 : 1.3 + * - Fix setting of RPM fans on Xserve G5 (they were going too fast) + * - Add missing slots fan control loop for Xserve G5 + * - Lower fixed slots fan speed from 50% to 40% on desktop G5s. We + * still can't properly implement the control loop for these, so let's + * reduce the noise a little bit, it appears that 40% still gives us + * a pretty good air flow + * - Add code to "tickle" the FCU regulary so it doesn't think that + * we are gone while in fact, the machine just didn't need any fan + * speed change lately + * */ #include @@ -121,7 +132,7 @@ #include "therm_pm72.h" -#define VERSION "1.2b2" +#define VERSION "1.3" #undef DEBUG @@ -146,6 +157,7 @@ static struct basckside_pid_params backside_params; static struct backside_pid_state backside_state; static struct drives_pid_state drives_state; static struct dimm_pid_state dimms_state; +static struct slots_pid_state slots_state; static int state; static int cpu_count; static int cpu_pid_type; @@ -154,7 +166,8 @@ static struct completion ctrl_complete; static int critical_state; static int rackmac; static s32 dimm_output_clamp; - +static int fcu_rpm_shift; +static int fcu_tickle_ticks; static DECLARE_MUTEX(driver_lock); /* @@ -495,13 +508,20 @@ static int start_fcu(void) rc = fan_write_reg(0x2e, &buf, 1); if (rc < 0) return -EIO; + rc = fan_read_reg(0, &buf, 1); + if (rc < 0) + return -EIO; + fcu_rpm_shift = (buf == 1) ? 2 : 3; + printk(KERN_DEBUG "FCU Initialized, RPM fan shift is %d\n", + fcu_rpm_shift); + return 0; } static int set_rpm_fan(int fan_index, int rpm) { unsigned char buf[2]; - int rc, id; + int rc, id, min, max; if (fcu_fans[fan_index].type != FCU_FAN_RPM) return -EINVAL; @@ -509,12 +529,15 @@ static int set_rpm_fan(int fan_index, int rpm) if (id == FCU_FAN_ABSENT_ID) return -EINVAL; - if (rpm < 300) - rpm = 300; - else if (rpm > 8191) - rpm = 8191; - buf[0] = rpm >> 5; - buf[1] = rpm << 3; + min = 2400 >> fcu_rpm_shift; + max = 56000 >> fcu_rpm_shift; + + if (rpm < min) + rpm = min; + else if (rpm > max) + rpm = max; + buf[0] = rpm >> (8 - fcu_rpm_shift); + buf[1] = rpm << fcu_rpm_shift; rc = fan_write_reg(0x10 + (id * 2), buf, 2); if (rc < 0) return -EIO; @@ -551,7 +574,7 @@ static int get_rpm_fan(int fan_index, int programmed) if (rc != 2) return -EIO; - return (buf[0] << 5) | buf[1] >> 3; + return (buf[0] << (8 - fcu_rpm_shift)) | buf[1] >> fcu_rpm_shift; } static int set_pwm_fan(int fan_index, int pwm) @@ -609,6 +632,26 @@ static int get_pwm_fan(int fan_index) return (buf[0] * 1000) / 2559; } +static void tickle_fcu(void) +{ + int pwm; + + pwm = get_pwm_fan(SLOTS_FAN_PWM_INDEX); + + DBG("FCU Tickle, slots fan is: %d\n", pwm); + if (pwm < 0) + pwm = 100; + + if (!rackmac) { + pwm = SLOTS_FAN_DEFAULT_PWM; + } else if (pwm < SLOTS_PID_OUTPUT_MIN) + pwm = SLOTS_PID_OUTPUT_MIN; + + /* That is hopefully enough to make the FCU happy */ + set_pwm_fan(SLOTS_FAN_PWM_INDEX, pwm); +} + + /* * Utility routine to read the CPU calibration EEPROM data * from the device-tree @@ -715,6 +758,9 @@ BUILD_SHOW_FUNC_INT(backside_fan_pwm, backside_state.pwm) BUILD_SHOW_FUNC_FIX(drives_temperature, drives_state.last_temp) BUILD_SHOW_FUNC_INT(drives_fan_rpm, drives_state.rpm) +BUILD_SHOW_FUNC_FIX(slots_temperature, slots_state.last_temp) +BUILD_SHOW_FUNC_INT(slots_fan_pwm, slots_state.pwm) + BUILD_SHOW_FUNC_FIX(dimms_temperature, dimms_state.last_temp) static DEVICE_ATTR(cpu0_temperature,S_IRUGO,show_cpu0_temperature,NULL); @@ -735,6 +781,9 @@ static DEVICE_ATTR(backside_fan_pwm,S_IRUGO,show_backside_fan_pwm,NULL); static DEVICE_ATTR(drives_temperature,S_IRUGO,show_drives_temperature,NULL); static DEVICE_ATTR(drives_fan_rpm,S_IRUGO,show_drives_fan_rpm,NULL); +static DEVICE_ATTR(slots_temperature,S_IRUGO,show_slots_temperature,NULL); +static DEVICE_ATTR(slots_fan_pwm,S_IRUGO,show_slots_fan_pwm,NULL); + static DEVICE_ATTR(dimms_temperature,S_IRUGO,show_dimms_temperature,NULL); /* @@ -1076,6 +1125,9 @@ static void do_monitor_cpu_rack(struct cpu_pid_state *state) fan_min = dimm_output_clamp; fan_min = max(fan_min, (int)state->mpu.rminn_intake_fan); + DBG(" CPU min mpu = %d, min dimm = %d\n", + state->mpu.rminn_intake_fan, dimm_output_clamp); + state->rpm = max(state->rpm, (int)fan_min); state->rpm = min(state->rpm, (int)state->mpu.rmaxn_intake_fan); state->intake_rpm = state->rpm; @@ -1374,7 +1426,8 @@ static void do_monitor_drives(struct drives_pid_state *state) DBG(" current rpm: %d\n", state->rpm); /* Get some sensor readings */ - temp = le16_to_cpu(i2c_smbus_read_word_data(state->monitor, DS1775_TEMP)) << 8; + temp = le16_to_cpu(i2c_smbus_read_word_data(state->monitor, + DS1775_TEMP)) << 8; state->last_temp = temp; DBG(" temp: %d.%03d, target: %d.%03d\n", FIX32TOPRINT(temp), FIX32TOPRINT(DRIVES_PID_INPUT_TARGET)); @@ -1575,7 +1628,7 @@ static int init_dimms_state(struct dimm_pid_state *state) } /* - * Dispose of the state data for the drives control loop + * Dispose of the state data for the DIMM control loop */ static void dispose_dimms_state(struct dimm_pid_state *state) { @@ -1588,6 +1641,127 @@ static void dispose_dimms_state(struct dimm_pid_state *state) state->monitor = NULL; } +/* + * Slots fan control loop + */ +static void do_monitor_slots(struct slots_pid_state *state) +{ + s32 temp, integral, derivative; + s64 integ_p, deriv_p, prop_p, sum; + int i, rc; + + if (--state->ticks != 0) + return; + state->ticks = SLOTS_PID_INTERVAL; + + DBG("slots:\n"); + + /* Check fan status */ + rc = get_pwm_fan(SLOTS_FAN_PWM_INDEX); + if (rc < 0) { + printk(KERN_WARNING "Error %d reading slots fan !\n", rc); + /* XXX What do we do now ? */ + } else + state->pwm = rc; + DBG(" current pwm: %d\n", state->pwm); + + /* Get some sensor readings */ + temp = le16_to_cpu(i2c_smbus_read_word_data(state->monitor, + DS1775_TEMP)) << 8; + state->last_temp = temp; + DBG(" temp: %d.%03d, target: %d.%03d\n", FIX32TOPRINT(temp), + FIX32TOPRINT(SLOTS_PID_INPUT_TARGET)); + + /* Store temperature and error in history array */ + state->cur_sample = (state->cur_sample + 1) % SLOTS_PID_HISTORY_SIZE; + state->sample_history[state->cur_sample] = temp; + state->error_history[state->cur_sample] = temp - SLOTS_PID_INPUT_TARGET; + + /* If first loop, fill the history table */ + if (state->first) { + for (i = 0; i < (SLOTS_PID_HISTORY_SIZE - 1); i++) { + state->cur_sample = (state->cur_sample + 1) % + SLOTS_PID_HISTORY_SIZE; + state->sample_history[state->cur_sample] = temp; + state->error_history[state->cur_sample] = + temp - SLOTS_PID_INPUT_TARGET; + } + state->first = 0; + } + + /* Calculate the integral term */ + sum = 0; + integral = 0; + for (i = 0; i < SLOTS_PID_HISTORY_SIZE; i++) + integral += state->error_history[i]; + integral *= SLOTS_PID_INTERVAL; + DBG(" integral: %08x\n", integral); + integ_p = ((s64)SLOTS_PID_G_r) * (s64)integral; + DBG(" integ_p: %d\n", (int)(integ_p >> 36)); + sum += integ_p; + + /* Calculate the derivative term */ + derivative = state->error_history[state->cur_sample] - + state->error_history[(state->cur_sample + SLOTS_PID_HISTORY_SIZE - 1) + % SLOTS_PID_HISTORY_SIZE]; + derivative /= SLOTS_PID_INTERVAL; + deriv_p = ((s64)SLOTS_PID_G_d) * (s64)derivative; + DBG(" deriv_p: %d\n", (int)(deriv_p >> 36)); + sum += deriv_p; + + /* Calculate the proportional term */ + prop_p = ((s64)SLOTS_PID_G_p) * (s64)(state->error_history[state->cur_sample]); + DBG(" prop_p: %d\n", (int)(prop_p >> 36)); + sum += prop_p; + + /* Scale sum */ + sum >>= 36; + + DBG(" sum: %d\n", (int)sum); + state->pwm = (s32)sum; + + state->pwm = max(state->pwm, SLOTS_PID_OUTPUT_MIN); + state->pwm = min(state->pwm, SLOTS_PID_OUTPUT_MAX); + + DBG("** DRIVES PWM: %d\n", (int)state->pwm); + set_pwm_fan(SLOTS_FAN_PWM_INDEX, state->pwm); +} + +/* + * Initialize the state structure for the slots bay fan control loop + */ +static int init_slots_state(struct slots_pid_state *state) +{ + state->ticks = 1; + state->first = 1; + state->pwm = 50; + + state->monitor = attach_i2c_chip(XSERVE_SLOTS_LM75, "slots_temp"); + if (state->monitor == NULL) + return -ENODEV; + + device_create_file(&of_dev->dev, &dev_attr_slots_temperature); + device_create_file(&of_dev->dev, &dev_attr_slots_fan_pwm); + + return 0; +} + +/* + * Dispose of the state data for the slots control loop + */ +static void dispose_slots_state(struct slots_pid_state *state) +{ + if (state->monitor == NULL) + return; + + device_remove_file(&of_dev->dev, &dev_attr_slots_temperature); + device_remove_file(&of_dev->dev, &dev_attr_slots_fan_pwm); + + detach_i2c_chip(state->monitor); + state->monitor = NULL; +} + + static int call_critical_overtemp(void) { char *argv[] = { critical_overtemp_path, NULL }; @@ -1617,14 +1791,17 @@ static int main_control_loop(void *x) goto out; } - /* Set the PCI fan once for now */ - set_pwm_fan(SLOTS_FAN_PWM_INDEX, SLOTS_FAN_DEFAULT_PWM); + /* Set the PCI fan once for now on non-RackMac */ + if (!rackmac) + set_pwm_fan(SLOTS_FAN_PWM_INDEX, SLOTS_FAN_DEFAULT_PWM); /* Initialize ADCs */ initialize_adc(&cpu_state[0]); if (cpu_state[1].monitor != NULL) initialize_adc(&cpu_state[1]); + fcu_tickle_ticks = FCU_TICKLE_TICKS; + up(&driver_lock); while (state == state_attached) { @@ -1634,6 +1811,12 @@ static int main_control_loop(void *x) down(&driver_lock); + /* Tickle the FCU just in case */ + if (--fcu_tickle_ticks < 0) { + fcu_tickle_ticks = FCU_TICKLE_TICKS; + tickle_fcu(); + } + /* First, we always calculate the new DIMMs state on an Xserve */ if (rackmac) do_monitor_dimms(&dimms_state); @@ -1654,7 +1837,9 @@ static int main_control_loop(void *x) } /* Then, the rest */ do_monitor_backside(&backside_state); - if (!rackmac) + if (rackmac) + do_monitor_slots(&slots_state); + else do_monitor_drives(&drives_state); up(&driver_lock); @@ -1696,6 +1881,7 @@ static void dispose_control_loops(void) dispose_cpu_state(&cpu_state[1]); dispose_backside_state(&backside_state); dispose_drives_state(&drives_state); + dispose_slots_state(&slots_state); dispose_dimms_state(&dimms_state); } @@ -1745,6 +1931,8 @@ static int create_control_loops(void) goto fail; if (rackmac && init_dimms_state(&dimms_state)) goto fail; + if (rackmac && init_slots_state(&slots_state)) + goto fail; if (!rackmac && init_drives_state(&drives_state)) goto fail; diff --git a/drivers/macintosh/therm_pm72.h b/drivers/macintosh/therm_pm72.h index fc7e9b7ecaf..393cc9df94e 100644 --- a/drivers/macintosh/therm_pm72.h +++ b/drivers/macintosh/therm_pm72.h @@ -105,6 +105,7 @@ static char * critical_overtemp_path = "/sbin/critical_overtemp"; #define DRIVES_DALLAS_ID 0x94 #define BACKSIDE_MAX_ID 0x98 #define XSERVE_DIMMS_LM87 0x25a +#define XSERVE_SLOTS_LM75 0x290 /* * Some MAX6690, DS1775, LM87 register definitions @@ -198,7 +199,7 @@ struct drives_pid_state #define SLOTS_FAN_PWM_DEFAULT_ID 2 #define SLOTS_FAN_PWM_INDEX 2 -#define SLOTS_FAN_DEFAULT_PWM 50 /* Do better here ! */ +#define SLOTS_FAN_DEFAULT_PWM 40 /* Do better here ! */ /* @@ -206,7 +207,7 @@ struct drives_pid_state */ #define DIMM_PID_G_d 0 #define DIMM_PID_G_p 0 -#define DIMM_PID_G_r 0x6553600 +#define DIMM_PID_G_r 0x06553600 #define DIMM_PID_INPUT_TARGET 3276800 #define DIMM_PID_INTERVAL 1 #define DIMM_PID_OUTPUT_MAX 14000 @@ -226,6 +227,31 @@ struct dimm_pid_state }; +/* + * PID factors for the Xserve Slots control loop + */ +#define SLOTS_PID_G_d 0 +#define SLOTS_PID_G_p 0 +#define SLOTS_PID_G_r 0x00100000 +#define SLOTS_PID_INPUT_TARGET 3200000 +#define SLOTS_PID_INTERVAL 1 +#define SLOTS_PID_OUTPUT_MAX 100 +#define SLOTS_PID_OUTPUT_MIN 20 +#define SLOTS_PID_HISTORY_SIZE 20 + +struct slots_pid_state +{ + int ticks; + struct i2c_client * monitor; + s32 sample_history[SLOTS_PID_HISTORY_SIZE]; + s32 error_history[SLOTS_PID_HISTORY_SIZE]; + int cur_sample; + s32 last_temp; + int first; + int pwm; +}; + + /* Desktops */ @@ -283,6 +309,9 @@ struct cpu_pid_state s32 pump_max; }; +/* Tickle FCU every 10 seconds */ +#define FCU_TICKLE_TICKS 10 + /* * Driver state */ -- cgit v1.2.3-70-g09d2 From 4c962b5a42e5fc24e2d5d73896732cf3578da260 Mon Sep 17 00:00:00 2001 From: Danny van Dyk Date: Tue, 11 Jul 2006 22:25:28 +0100 Subject: [POWERPC] PMAC_APM_EMU should depend on ADB_PMU This patch fixes undefined refereneces to pmu_ symbols on 2.6.17. Signed-Off-By: Danny van Dyk Signed-off-by: Daniel Drake Signed-off-by: Paul Mackerras --- drivers/macintosh/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/macintosh') diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index f18c956fd59..44708b5e582 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -109,7 +109,7 @@ config PMAC_SMU config PMAC_APM_EMU tristate "APM emulation" - depends on PPC_PMAC && PPC32 && PM + depends on PPC_PMAC && PPC32 && PM && ADB_PMU config PMAC_MEDIABAY bool "Support PowerBook hotswap media bay" -- cgit v1.2.3-70-g09d2 From 4b755999d6e0c1d988fb448289abb6c226cd8c36 Mon Sep 17 00:00:00 2001 From: Michael Hanselmann Date: Sun, 30 Jul 2006 03:04:19 -0700 Subject: [PATCH] powermac: More powermac backlight fixes This patch fixes several problems: - The legacy backlight value might be set at interrupt time. Introduced a worker to prevent it from directly calling the backlight code. - via-pmu allows the backlight to be grabbed, in which case we need to prevent other kernel code from changing the brightness. - Don't send PMU requests in via-pmu-backlight when the machine is about to sleep or waking up. - More Kconfig fixes. Signed-off-by: Michael Hanselmann Cc: Benjamin Herrenschmidt Cc: "Antonino A. Daplas" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/platforms/powermac/backlight.c | 58 ++++++++++++++++++++++-- drivers/macintosh/Kconfig | 2 - drivers/macintosh/adbhid.c | 14 ++---- drivers/macintosh/via-pmu-backlight.c | 68 +++++++++++++++++++++++------ drivers/macintosh/via-pmu.c | 39 ++++++----------- drivers/video/Kconfig | 28 +++++------- drivers/video/aty/aty128fb.c | 3 ++ drivers/video/aty/atyfb_base.c | 4 +- include/asm-powerpc/backlight.h | 4 ++ include/linux/pmu.h | 3 +- 10 files changed, 147 insertions(+), 76 deletions(-) (limited to 'drivers/macintosh') diff --git a/arch/powerpc/platforms/powermac/backlight.c b/arch/powerpc/platforms/powermac/backlight.c index 74eed6b74cd..d6641549105 100644 --- a/arch/powerpc/platforms/powermac/backlight.c +++ b/arch/powerpc/platforms/powermac/backlight.c @@ -10,19 +10,32 @@ #include #include #include +#include +#include +#include #include #include #define OLD_BACKLIGHT_MAX 15 static void pmac_backlight_key_worker(void *data); +static void pmac_backlight_set_legacy_worker(void *data); + static DECLARE_WORK(pmac_backlight_key_work, pmac_backlight_key_worker, NULL); +static DECLARE_WORK(pmac_backlight_set_legacy_work, pmac_backlight_set_legacy_worker, NULL); -/* Although this variable is used in interrupt context, it makes no sense to - * protect it. No user is able to produce enough key events per second and +/* Although these variables are used in interrupt context, it makes no sense to + * protect them. No user is able to produce enough key events per second and * notice the errors that might happen. */ static int pmac_backlight_key_queued; +static int pmac_backlight_set_legacy_queued; + +/* The via-pmu code allows the backlight to be grabbed, in which case the + * in-kernel control of the brightness needs to be disabled. This should + * only be used by really old PowerBooks. + */ +static atomic_t kernel_backlight_disabled = ATOMIC_INIT(0); /* Protect the pmac_backlight variable */ DEFINE_MUTEX(pmac_backlight_mutex); @@ -82,6 +95,9 @@ int pmac_backlight_curve_lookup(struct fb_info *info, int value) static void pmac_backlight_key_worker(void *data) { + if (atomic_read(&kernel_backlight_disabled)) + return; + mutex_lock(&pmac_backlight_mutex); if (pmac_backlight) { struct backlight_properties *props; @@ -107,8 +123,12 @@ static void pmac_backlight_key_worker(void *data) mutex_unlock(&pmac_backlight_mutex); } +/* This function is called in interrupt context */ void pmac_backlight_key(int direction) { + if (atomic_read(&kernel_backlight_disabled)) + return; + /* we can receive multiple interrupts here, but the scheduled work * will run only once, with the last value */ @@ -116,7 +136,7 @@ void pmac_backlight_key(int direction) schedule_work(&pmac_backlight_key_work); } -int pmac_backlight_set_legacy_brightness(int brightness) +static int __pmac_backlight_set_legacy_brightness(int brightness) { int error = -ENXIO; @@ -145,6 +165,28 @@ int pmac_backlight_set_legacy_brightness(int brightness) return error; } +static void pmac_backlight_set_legacy_worker(void *data) +{ + if (atomic_read(&kernel_backlight_disabled)) + return; + + __pmac_backlight_set_legacy_brightness(pmac_backlight_set_legacy_queued); +} + +/* This function is called in interrupt context */ +void pmac_backlight_set_legacy_brightness_pmu(int brightness) { + if (atomic_read(&kernel_backlight_disabled)) + return; + + pmac_backlight_set_legacy_queued = brightness; + schedule_work(&pmac_backlight_set_legacy_work); +} + +int pmac_backlight_set_legacy_brightness(int brightness) +{ + return __pmac_backlight_set_legacy_brightness(brightness); +} + int pmac_backlight_get_legacy_brightness() { int result = -ENXIO; @@ -167,6 +209,16 @@ int pmac_backlight_get_legacy_brightness() return result; } +void pmac_backlight_disable() +{ + atomic_inc(&kernel_backlight_disabled); +} + +void pmac_backlight_enable() +{ + atomic_dec(&kernel_backlight_disabled); +} + EXPORT_SYMBOL_GPL(pmac_backlight); EXPORT_SYMBOL_GPL(pmac_backlight_mutex); EXPORT_SYMBOL_GPL(pmac_has_backlight_type); diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index f5fe7fb4b3a..d162307e309 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -115,8 +115,6 @@ config PMAC_BACKLIGHT bool "Backlight control for LCD screens" depends on ADB_PMU && FB = y && (BROKEN || !PPC64) select FB_BACKLIGHT - select BACKLIGHT_CLASS_DEVICE - select BACKLIGHT_LCD_SUPPORT help Say Y here to enable Macintosh specific extensions of the generic backlight code. With this enabled, the brightness keys on older diff --git a/drivers/macintosh/adbhid.c b/drivers/macintosh/adbhid.c index 545be1ed692..c69d23bb255 100644 --- a/drivers/macintosh/adbhid.c +++ b/drivers/macintosh/adbhid.c @@ -45,14 +45,11 @@ #include #include +#include #ifdef CONFIG_PPC_PMAC #include #endif -#ifdef CONFIG_PMAC_BACKLIGHT -#include -#endif - MODULE_AUTHOR("Franz Sirl "); #define KEYB_KEYREG 0 /* register # for key up/down data */ @@ -237,11 +234,6 @@ static struct adb_ids keyboard_ids; static struct adb_ids mouse_ids; static struct adb_ids buttons_ids; -#ifdef CONFIG_PMAC_BACKLIGHT -/* Exported to via-pmu.c */ -int disable_kernel_backlight = 0; -#endif /* CONFIG_PMAC_BACKLIGHT */ - /* Kind of keyboard, see Apple technote 1152 */ #define ADB_KEYBOARD_UNKNOWN 0 #define ADB_KEYBOARD_ANSI 0x0100 @@ -527,7 +519,7 @@ adbhid_buttons_input(unsigned char *data, int nb, struct pt_regs *regs, int auto case 0xa: /* brightness decrease */ #ifdef CONFIG_PMAC_BACKLIGHT - if (!disable_kernel_backlight && down) + if (down) pmac_backlight_key_down(); #endif input_report_key(adbhid[id]->input, KEY_BRIGHTNESSDOWN, down); @@ -535,7 +527,7 @@ adbhid_buttons_input(unsigned char *data, int nb, struct pt_regs *regs, int auto case 0x9: /* brightness increase */ #ifdef CONFIG_PMAC_BACKLIGHT - if (!disable_kernel_backlight && down) + if (down) pmac_backlight_key_up(); #endif input_report_key(adbhid[id]->input, KEY_BRIGHTNESSUP, down); diff --git a/drivers/macintosh/via-pmu-backlight.c b/drivers/macintosh/via-pmu-backlight.c index b42d05f2aaf..d3f8d75bcbb 100644 --- a/drivers/macintosh/via-pmu-backlight.c +++ b/drivers/macintosh/via-pmu-backlight.c @@ -15,8 +15,9 @@ #define MAX_PMU_LEVEL 0xFF -static struct device_node *vias; static struct backlight_properties pmu_backlight_data; +static spinlock_t pmu_backlight_lock; +static int sleeping; static int pmu_backlight_get_level_brightness(struct fb_info *info, int level) @@ -40,23 +41,36 @@ static int pmu_backlight_update_status(struct backlight_device *bd) { struct fb_info *info = class_get_devdata(&bd->class_dev); struct adb_request req; - int pmulevel, level = bd->props->brightness; + unsigned long flags; + int level = bd->props->brightness; - if (vias == NULL) - return -ENODEV; + spin_lock_irqsave(&pmu_backlight_lock, flags); + + /* Don't update brightness when sleeping */ + if (sleeping) + goto out; if (bd->props->power != FB_BLANK_UNBLANK || bd->props->fb_blank != FB_BLANK_UNBLANK) level = 0; - pmulevel = pmu_backlight_get_level_brightness(info, level); + if (level > 0) { + int pmulevel = pmu_backlight_get_level_brightness(info, level); - pmu_request(&req, NULL, 2, PMU_BACKLIGHT_BRIGHT, pmulevel); - pmu_wait_complete(&req); + pmu_request(&req, NULL, 2, PMU_BACKLIGHT_BRIGHT, pmulevel); + pmu_wait_complete(&req); - pmu_request(&req, NULL, 2, PMU_POWER_CTRL, - PMU_POW_BACKLIGHT | (level > 0 ? PMU_POW_ON : PMU_POW_OFF)); - pmu_wait_complete(&req); + pmu_request(&req, NULL, 2, PMU_POWER_CTRL, + PMU_POW_BACKLIGHT | PMU_POW_ON); + pmu_wait_complete(&req); + } else { + pmu_request(&req, NULL, 2, PMU_POWER_CTRL, + PMU_POW_BACKLIGHT | PMU_POW_OFF); + pmu_wait_complete(&req); + } + +out: + spin_unlock_irqrestore(&pmu_backlight_lock, flags); return 0; } @@ -73,15 +87,39 @@ static struct backlight_properties pmu_backlight_data = { .max_brightness = (FB_BACKLIGHT_LEVELS - 1), }; -void __init pmu_backlight_init(struct device_node *in_vias) +#ifdef CONFIG_PM +static int pmu_backlight_sleep_call(struct pmu_sleep_notifier *self, int when) +{ + unsigned long flags; + + spin_lock_irqsave(&pmu_backlight_lock, flags); + + switch (when) { + case PBOOK_SLEEP_REQUEST: + sleeping = 1; + break; + case PBOOK_WAKE: + sleeping = 0; + break; + } + + spin_unlock_irqrestore(&pmu_backlight_lock, flags); + + return PBOOK_SLEEP_OK; +} + +static struct pmu_sleep_notifier pmu_backlight_sleep_notif = { + .notifier_call = pmu_backlight_sleep_call, +}; +#endif + +void __init pmu_backlight_init() { struct backlight_device *bd; struct fb_info *info; char name[10]; int level, autosave; - vias = in_vias; - /* Special case for the old PowerBook since I can't test on it */ autosave = machine_is_compatible("AAPL,3400/2400") || @@ -141,6 +179,10 @@ void __init pmu_backlight_init(struct device_node *in_vias) pmac_backlight = bd; mutex_unlock(&pmac_backlight_mutex); +#ifdef CONFIG_PM + pmu_register_sleep_notifier(&pmu_backlight_sleep_notif); +#endif + printk("pmubl: Backlight initialized (%s)\n", name); return; diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index 06ca80bfd6b..ea386801e21 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -16,7 +16,6 @@ * a sleep or a freq. switch * - Move sleep code out of here to pmac_pm, merge into new * common PM infrastructure - * - Move backlight code out as well * - Save/Restore PCI space properly * */ @@ -60,9 +59,7 @@ #include #include #include -#ifdef CONFIG_PMAC_BACKLIGHT #include -#endif #include "via-pmu-event.h" @@ -177,10 +174,6 @@ static int query_batt_timer = BATTERY_POLLING_COUNT; static struct adb_request batt_req; static struct proc_dir_entry *proc_pmu_batt[PMU_MAX_BATTERIES]; -#if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) -extern int disable_kernel_backlight; -#endif /* defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) */ - int __fake_sleep; int asleep; BLOCKING_NOTIFIER_HEAD(sleep_notifier_list); @@ -466,7 +459,7 @@ static int __init via_pmu_dev_init(void) #ifdef CONFIG_PMAC_BACKLIGHT /* Initialize backlight */ - pmu_backlight_init(vias); + pmu_backlight_init(); #endif #ifdef CONFIG_PPC32 @@ -1403,11 +1396,8 @@ next: else if ((1 << pirq) & PMU_INT_SNDBRT) { #ifdef CONFIG_PMAC_BACKLIGHT if (len == 3) -#ifdef CONFIG_INPUT_ADBHID - if (!disable_kernel_backlight) -#endif /* CONFIG_INPUT_ADBHID */ - pmac_backlight_set_legacy_brightness(data[1] >> 4); -#endif /* CONFIG_PMAC_BACKLIGHT */ + pmac_backlight_set_legacy_brightness_pmu(data[1] >> 4); +#endif } /* Tick interrupt */ else if ((1 << pirq) & PMU_INT_TICK) { @@ -2414,7 +2404,7 @@ struct pmu_private { spinlock_t lock; #if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) int backlight_locker; -#endif /* defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) */ +#endif }; static LIST_HEAD(all_pmu_pvt); @@ -2464,7 +2454,7 @@ pmu_open(struct inode *inode, struct file *file) spin_lock_irqsave(&all_pvt_lock, flags); #if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) pp->backlight_locker = 0; -#endif /* defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) */ +#endif list_add(&pp->list, &all_pmu_pvt); spin_unlock_irqrestore(&all_pvt_lock, flags); file->private_data = pp; @@ -2559,13 +2549,12 @@ pmu_release(struct inode *inode, struct file *file) spin_lock_irqsave(&all_pvt_lock, flags); list_del(&pp->list); spin_unlock_irqrestore(&all_pvt_lock, flags); + #if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) - if (pp->backlight_locker) { - spin_lock_irqsave(&pmu_lock, flags); - disable_kernel_backlight--; - spin_unlock_irqrestore(&pmu_lock, flags); - } -#endif /* defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) */ + if (pp->backlight_locker) + pmac_backlight_enable(); +#endif + kfree(pp); } unlock_kernel(); @@ -2642,18 +2631,18 @@ pmu_ioctl(struct inode * inode, struct file *filp, #ifdef CONFIG_INPUT_ADBHID case PMU_IOC_GRAB_BACKLIGHT: { struct pmu_private *pp = filp->private_data; - unsigned long flags; if (pp->backlight_locker) return 0; + pp->backlight_locker = 1; - spin_lock_irqsave(&pmu_lock, flags); - disable_kernel_backlight++; - spin_unlock_irqrestore(&pmu_lock, flags); + pmac_backlight_disable(); + return 0; } #endif /* CONFIG_INPUT_ADBHID */ #endif /* CONFIG_PMAC_BACKLIGHT_LEGACY */ + case PMU_IOC_GET_MODEL: return put_user(pmu_kind, argp); case PMU_IOC_HAS_ADB: diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 728cb567772..c40b9b8b1e7 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -86,9 +86,11 @@ config FB_MACMODES default n config FB_BACKLIGHT - bool - depends on FB - default n + bool + depends on FB + select BACKLIGHT_LCD_SUPPORT + select BACKLIGHT_CLASS_DEVICE + default n config FB_MODE_HELPERS bool "Enable Video Mode Handling Helpers" @@ -721,10 +723,8 @@ config FB_NVIDIA_I2C config FB_NVIDIA_BACKLIGHT bool "Support for backlight control" - depends on FB_NVIDIA && PPC_PMAC + depends on FB_NVIDIA && PMAC_BACKLIGHT select FB_BACKLIGHT - select BACKLIGHT_LCD_SUPPORT - select BACKLIGHT_CLASS_DEVICE default y help Say Y here if you want to control the backlight of your display. @@ -769,10 +769,8 @@ config FB_RIVA_DEBUG config FB_RIVA_BACKLIGHT bool "Support for backlight control" - depends on FB_RIVA && PPC_PMAC + depends on FB_RIVA && PMAC_BACKLIGHT select FB_BACKLIGHT - select BACKLIGHT_LCD_SUPPORT - select BACKLIGHT_CLASS_DEVICE default y help Say Y here if you want to control the backlight of your display. @@ -1025,10 +1023,8 @@ config FB_RADEON_I2C config FB_RADEON_BACKLIGHT bool "Support for backlight control" - depends on FB_RADEON && PPC_PMAC + depends on FB_RADEON && PMAC_BACKLIGHT select FB_BACKLIGHT - select BACKLIGHT_LCD_SUPPORT - select BACKLIGHT_CLASS_DEVICE default y help Say Y here if you want to control the backlight of your display. @@ -1059,10 +1055,8 @@ config FB_ATY128 config FB_ATY128_BACKLIGHT bool "Support for backlight control" - depends on FB_ATY128 && PPC_PMAC + depends on FB_ATY128 && PMAC_BACKLIGHT select FB_BACKLIGHT - select BACKLIGHT_LCD_SUPPORT - select BACKLIGHT_CLASS_DEVICE default y help Say Y here if you want to control the backlight of your display. @@ -1111,10 +1105,8 @@ config FB_ATY_GX config FB_ATY_BACKLIGHT bool "Support for backlight control" - depends on FB_ATY && PPC_PMAC + depends on FB_ATY && PMAC_BACKLIGHT select FB_BACKLIGHT - select BACKLIGHT_LCD_SUPPORT - select BACKLIGHT_CLASS_DEVICE default y help Say Y here if you want to control the backlight of your display. diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c index c64a717e2d4..8b08121b390 100644 --- a/drivers/video/aty/aty128fb.c +++ b/drivers/video/aty/aty128fb.c @@ -455,7 +455,10 @@ static void do_wait_for_fifo(u16 entries, struct aty128fb_par *par); static void wait_for_fifo(u16 entries, struct aty128fb_par *par); static void wait_for_idle(struct aty128fb_par *par); static u32 depth_to_dst(u32 depth); + +#ifdef CONFIG_FB_ATY128_BACKLIGHT static void aty128_bl_set_power(struct fb_info *info, int power); +#endif #define BIOS_IN8(v) (readb(bios + (v))) #define BIOS_IN16(v) (readb(bios + (v)) | \ diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c index 1507d19f481..053ff63365b 100644 --- a/drivers/video/aty/atyfb_base.c +++ b/drivers/video/aty/atyfb_base.c @@ -2812,7 +2812,7 @@ static int atyfb_blank(int blank, struct fb_info *info) if (par->lock_blank || par->asleep) return 0; -#ifdef CONFIG_PMAC_BACKLIGHT +#ifdef CONFIG_FB_ATY_BACKLIGHT if (machine_is(powermac) && blank > FB_BLANK_NORMAL) aty_bl_set_power(info, FB_BLANK_POWERDOWN); #elif defined(CONFIG_FB_ATY_GENERIC_LCD) @@ -2844,7 +2844,7 @@ static int atyfb_blank(int blank, struct fb_info *info) } aty_st_le32(CRTC_GEN_CNTL, gen_cntl, par); -#ifdef CONFIG_PMAC_BACKLIGHT +#ifdef CONFIG_FB_ATY_BACKLIGHT if (machine_is(powermac) && blank <= FB_BLANK_NORMAL) aty_bl_set_power(info, FB_BLANK_UNBLANK); #elif defined(CONFIG_FB_ATY_GENERIC_LCD) diff --git a/include/asm-powerpc/backlight.h b/include/asm-powerpc/backlight.h index 58d4b6f8d82..8cf5c37c381 100644 --- a/include/asm-powerpc/backlight.h +++ b/include/asm-powerpc/backlight.h @@ -30,8 +30,12 @@ static inline void pmac_backlight_key_down(void) pmac_backlight_key(1); } +extern void pmac_backlight_set_legacy_brightness_pmu(int brightness); extern int pmac_backlight_set_legacy_brightness(int brightness); extern int pmac_backlight_get_legacy_brightness(void); +extern void pmac_backlight_enable(void); +extern void pmac_backlight_disable(void); + #endif /* __KERNEL__ */ #endif diff --git a/include/linux/pmu.h b/include/linux/pmu.h index 2ed807ddc08..783177387ac 100644 --- a/include/linux/pmu.h +++ b/include/linux/pmu.h @@ -231,7 +231,6 @@ extern struct pmu_battery_info pmu_batteries[PMU_MAX_BATTERIES]; extern unsigned int pmu_power_flags; /* Backlight */ -extern int disable_kernel_backlight; -extern void pmu_backlight_init(struct device_node*); +extern void pmu_backlight_init(void); #endif /* __KERNEL__ */ -- cgit v1.2.3-70-g09d2