From af195ac82e38ba802fd86b5a014ed05ef6dd88bb Mon Sep 17 00:00:00 2001 From: Jonathan Brassow Date: Fri, 8 Feb 2008 02:11:39 +0000 Subject: dm raid1: report fault status This patch adds extra information to the mirror status output, so that it can be determined which device(s) have failed. For each mirror device, a character is printed indicating the most severe error encountered. The characters are: * A => Alive - No failures * D => Dead - A write failure occurred leaving mirror out-of-sync * S => Sync - A sychronization failure occurred, mirror out-of-sync * R => Read - A read failure occurred, mirror data unaffected This allows userspace to properly reconfigure the mirror set. Signed-off-by: Jonathan Brassow Signed-off-by: Alasdair G Kergon --- drivers/md/dm-raid1.c | 44 ++++++++++++++++++++++++++++++++++++-------- 1 file changed, 36 insertions(+), 8 deletions(-) (limited to 'drivers/md/dm-raid1.c') diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index 38efa7071dd..edc057f5cdc 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -1781,29 +1781,57 @@ static void mirror_resume(struct dm_target *ti) rh_start_recovery(&ms->rh); } +/* + * device_status_char + * @m: mirror device/leg we want the status of + * + * We return one character representing the most severe error + * we have encountered. + * A => Alive - No failures + * D => Dead - A write failure occurred leaving mirror out-of-sync + * S => Sync - A sychronization failure occurred, mirror out-of-sync + * R => Read - A read failure occurred, mirror data unaffected + * + * Returns: + */ +static char device_status_char(struct mirror *m) +{ + if (!atomic_read(&(m->error_count))) + return 'A'; + + return (test_bit(DM_RAID1_WRITE_ERROR, &(m->error_type))) ? 'D' : + (test_bit(DM_RAID1_SYNC_ERROR, &(m->error_type))) ? 'S' : + (test_bit(DM_RAID1_READ_ERROR, &(m->error_type))) ? 'R' : 'U'; +} + + static int mirror_status(struct dm_target *ti, status_type_t type, char *result, unsigned int maxlen) { unsigned int m, sz = 0; struct mirror_set *ms = (struct mirror_set *) ti->private; + struct dirty_log *log = ms->rh.log; + char buffer[ms->nr_mirrors + 1]; switch (type) { case STATUSTYPE_INFO: DMEMIT("%d ", ms->nr_mirrors); - for (m = 0; m < ms->nr_mirrors; m++) + for (m = 0; m < ms->nr_mirrors; m++) { DMEMIT("%s ", ms->mirror[m].dev->name); + buffer[m] = device_status_char(&(ms->mirror[m])); + } + buffer[m] = '\0'; - DMEMIT("%llu/%llu 0 ", - (unsigned long long)ms->rh.log->type-> - get_sync_count(ms->rh.log), - (unsigned long long)ms->nr_regions); + DMEMIT("%llu/%llu 1 %s ", + (unsigned long long)log->type->get_sync_count(ms->rh.log), + (unsigned long long)ms->nr_regions, buffer); - sz += ms->rh.log->type->status(ms->rh.log, type, result+sz, maxlen-sz); + sz += log->type->status(ms->rh.log, type, result+sz, maxlen-sz); break; case STATUSTYPE_TABLE: - sz = ms->rh.log->type->status(ms->rh.log, type, result, maxlen); + sz = log->type->status(ms->rh.log, type, result, maxlen); DMEMIT("%d", ms->nr_mirrors); for (m = 0; m < ms->nr_mirrors; m++) @@ -1819,7 +1847,7 @@ static int mirror_status(struct dm_target *ti, status_type_t type, static struct target_type mirror_target = { .name = "mirror", - .version = {1, 0, 3}, + .version = {1, 0, 20}, .module = THIS_MODULE, .ctr = mirror_ctr, .dtr = mirror_dtr, -- cgit v1.2.3-70-g09d2