From f6a1ed10864b7540fa758bbccf3433fe17070329 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Fri, 4 Sep 2009 20:40:22 +0100 Subject: dm table: fix queue_limit checking device iterator The logic to check for valid device areas is inverted relative to proper use with iterate_devices. The iterate_devices method calls its callback for every underlying device in the target. If any callback returns non-zero, iterate_devices exits immediately. But the callback device_area_is_valid() returns 0 on error and 1 on success. The overall effect without is that an error is issued only if every device is invalid. This patch renames device_area_is_valid to device_area_is_invalid and inverts the logic so that one invalid device is sufficient to raise an error. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/dm-table.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'drivers/md/dm-table.c') diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index d952b344191..aa60526075d 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -343,10 +343,10 @@ static void close_dev(struct dm_dev_internal *d, struct mapped_device *md) } /* - * If possible, this checks an area of a destination device is valid. + * If possible, this checks an area of a destination device is invalid. */ -static int device_area_is_valid(struct dm_target *ti, struct dm_dev *dev, - sector_t start, sector_t len, void *data) +static int device_area_is_invalid(struct dm_target *ti, struct dm_dev *dev, + sector_t start, sector_t len, void *data) { struct queue_limits *limits = data; struct block_device *bdev = dev->bdev; @@ -357,16 +357,16 @@ static int device_area_is_valid(struct dm_target *ti, struct dm_dev *dev, char b[BDEVNAME_SIZE]; if (!dev_size) - return 1; + return 0; if ((start >= dev_size) || (start + len > dev_size)) { DMWARN("%s: %s too small for target", dm_device_name(ti->table->md), bdevname(bdev, b)); - return 0; + return 1; } if (logical_block_size_sectors <= 1) - return 1; + return 0; if (start & (logical_block_size_sectors - 1)) { DMWARN("%s: start=%llu not aligned to h/w " @@ -374,7 +374,7 @@ static int device_area_is_valid(struct dm_target *ti, struct dm_dev *dev, dm_device_name(ti->table->md), (unsigned long long)start, limits->logical_block_size, bdevname(bdev, b)); - return 0; + return 1; } if (len & (logical_block_size_sectors - 1)) { @@ -383,10 +383,10 @@ static int device_area_is_valid(struct dm_target *ti, struct dm_dev *dev, dm_device_name(ti->table->md), (unsigned long long)len, limits->logical_block_size, bdevname(bdev, b)); - return 0; + return 1; } - return 1; + return 0; } /* @@ -1000,8 +1000,8 @@ int dm_calculate_queue_limits(struct dm_table *table, * Check each device area is consistent with the target's * overall queue limits. */ - if (!ti->type->iterate_devices(ti, device_area_is_valid, - &ti_limits)) + if (ti->type->iterate_devices(ti, device_area_is_invalid, + &ti_limits)) return -EINVAL; combine_limits: -- cgit v1.2.3-70-g09d2 From a963a956225eb0f8c4d3537f428153c30adf54b8 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Fri, 4 Sep 2009 20:40:24 +0100 Subject: dm table: add more context to terse warning messages A couple of recent warning messages make it difficult for the reader to determine exactly what is wrong. This patch adds more information to those messages. The messages were added by these commits: 5dea271b6d87bd1d79a59c1d5baac2596a841c37 ("dm table: pass correct dev area size to device_area_is_valid") ea9df47cc92573b159ef3b4fda516c32cba9c4fd ("dm table: fix blk_stack_limits arg to use bytes not sectors") The patch also corrects references to logical_block_size in printk format strings from %hu to %u. Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/dm-table.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) (limited to 'drivers/md/dm-table.c') diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index aa60526075d..c90e662d280 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -360,8 +360,12 @@ static int device_area_is_invalid(struct dm_target *ti, struct dm_dev *dev, return 0; if ((start >= dev_size) || (start + len > dev_size)) { - DMWARN("%s: %s too small for target", - dm_device_name(ti->table->md), bdevname(bdev, b)); + DMWARN("%s: %s too small for target: " + "start=%llu, len=%llu, dev_size=%llu", + dm_device_name(ti->table->md), bdevname(bdev, b), + (unsigned long long)start, + (unsigned long long)len, + (unsigned long long)dev_size); return 1; } @@ -370,7 +374,7 @@ static int device_area_is_invalid(struct dm_target *ti, struct dm_dev *dev, if (start & (logical_block_size_sectors - 1)) { DMWARN("%s: start=%llu not aligned to h/w " - "logical block size %hu of %s", + "logical block size %u of %s", dm_device_name(ti->table->md), (unsigned long long)start, limits->logical_block_size, bdevname(bdev, b)); @@ -379,7 +383,7 @@ static int device_area_is_invalid(struct dm_target *ti, struct dm_dev *dev, if (len & (logical_block_size_sectors - 1)) { DMWARN("%s: len=%llu not aligned to h/w " - "logical block size %hu of %s", + "logical block size %u of %s", dm_device_name(ti->table->md), (unsigned long long)len, limits->logical_block_size, bdevname(bdev, b)); @@ -496,8 +500,15 @@ int dm_set_device_limits(struct dm_target *ti, struct dm_dev *dev, } if (blk_stack_limits(limits, &q->limits, start << 9) < 0) - DMWARN("%s: target device %s is misaligned", - dm_device_name(ti->table->md), bdevname(bdev, b)); + DMWARN("%s: target device %s is misaligned: " + "physical_block_size=%u, logical_block_size=%u, " + "alignment_offset=%u, start=%llu", + dm_device_name(ti->table->md), bdevname(bdev, b), + q->limits.physical_block_size, + q->limits.logical_block_size, + q->limits.alignment_offset, + (unsigned long long) start << 9); + /* * Check if merge fn is supported. @@ -698,7 +709,7 @@ static int validate_hardware_logical_block_alignment(struct dm_table *table, if (remaining) { DMWARN("%s: table line %u (start sect %llu len %llu) " - "not aligned to h/w logical block size %hu", + "not aligned to h/w logical block size %u", dm_device_name(table->md), i, (unsigned long long) ti->begin, (unsigned long long) ti->len, -- cgit v1.2.3-70-g09d2 From 40bea431274c247425e7f5970d796ff7b37a2b22 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Fri, 4 Sep 2009 20:40:25 +0100 Subject: dm stripe: expose correct io hints Set sensible I/O hints for striped DM devices in the topology infrastructure added for 2.6.31 for userspace tools to obtain via sysfs. Add .io_hints to 'struct target_type' to allow the I/O hints portion (io_min and io_opt) of the 'struct queue_limits' to be set by each target and implement this for dm-stripe. Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/dm-stripe.c | 13 ++++++++++++- drivers/md/dm-table.c | 4 ++++ include/linux/device-mapper.h | 4 ++++ 3 files changed, 20 insertions(+), 1 deletion(-) (limited to 'drivers/md/dm-table.c') diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c index 4e0e5937e42..3e563d25173 100644 --- a/drivers/md/dm-stripe.c +++ b/drivers/md/dm-stripe.c @@ -329,9 +329,19 @@ static int stripe_iterate_devices(struct dm_target *ti, return ret; } +static void stripe_io_hints(struct dm_target *ti, + struct queue_limits *limits) +{ + struct stripe_c *sc = ti->private; + unsigned chunk_size = (sc->chunk_mask + 1) << 9; + + blk_limits_io_min(limits, chunk_size); + limits->io_opt = chunk_size * sc->stripes; +} + static struct target_type stripe_target = { .name = "striped", - .version = {1, 2, 0}, + .version = {1, 3, 0}, .module = THIS_MODULE, .ctr = stripe_ctr, .dtr = stripe_dtr, @@ -339,6 +349,7 @@ static struct target_type stripe_target = { .end_io = stripe_end_io, .status = stripe_status, .iterate_devices = stripe_iterate_devices, + .io_hints = stripe_io_hints, }; int __init dm_stripe_init(void) diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index c90e662d280..1a6cb3c7822 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -1007,6 +1007,10 @@ int dm_calculate_queue_limits(struct dm_table *table, ti->type->iterate_devices(ti, dm_set_device_limits, &ti_limits); + /* Set I/O hints portion of queue limits */ + if (ti->type->io_hints) + ti->type->io_hints(ti, &ti_limits); + /* * Check each device area is consistent with the target's * overall queue limits. diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h index 655e7721580..df7607e6dce 100644 --- a/include/linux/device-mapper.h +++ b/include/linux/device-mapper.h @@ -91,6 +91,9 @@ typedef int (*dm_iterate_devices_fn) (struct dm_target *ti, iterate_devices_callout_fn fn, void *data); +typedef void (*dm_io_hints_fn) (struct dm_target *ti, + struct queue_limits *limits); + /* * Returns: * 0: The target can handle the next I/O immediately. @@ -151,6 +154,7 @@ struct target_type { dm_merge_fn merge; dm_busy_fn busy; dm_iterate_devices_fn iterate_devices; + dm_io_hints_fn io_hints; /* For internal device-mapper use. */ struct list_head list; -- cgit v1.2.3-70-g09d2