From 117a55b69d36a19028d1c59a737ad1246a0a75ad Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 18 Jul 2012 05:46:46 -0300 Subject: [media] ad9389b: driver for the Analog Devices AD9389B video encoder Initial version of this driver. The full datasheets are available from the Analog Devices website: http://ez.analog.com/docs/DOC-1741 Not all features of the receiver are supported by this driver for various reasons. Most notably: - No CEC support (the CEC API needs a lot more discussion) - No HDCP repeater support (we don't use that either) I'm sure that there are more things missing, but this driver does work well for our hardware. Note that I am using the register addresses instead of register names: the datasheet containing the register descriptions is organized by register address. Using names would make the datasheet lookup very hard. An attempt was made to try and document what is being done when registers are used instead. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/media/i2c/Makefile') diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile index 4954d403fb6..4a270f7983d 100644 --- a/drivers/media/i2c/Makefile +++ b/drivers/media/i2c/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_VIDEO_ADV7183) += adv7183.o obj-$(CONFIG_VIDEO_ADV7343) += adv7343.o obj-$(CONFIG_VIDEO_ADV7393) += adv7393.o obj-$(CONFIG_VIDEO_ADV7604) += adv7604.o +obj-$(CONFIG_VIDEO_AD9389B) += ad9389b.o obj-$(CONFIG_VIDEO_VPX3220) += vpx3220.o obj-$(CONFIG_VIDEO_VS6624) += vs6624.o obj-$(CONFIG_VIDEO_BT819) += bt819.o -- cgit v1.2.3-70-g09d2