From 0c0d06cac63ee327ceaab4b5ffe2206574ab86bd Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 14 Aug 2012 00:13:22 -0300 Subject: [media] rename most media/video usb drivers to media/usb Rename all USB drivers with their own directory under drivers/media/video into drivers/media/usb and update the building system. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/em28xx/em28xx-input.c | 645 ++++++++++++++++++++++++++++++++ 1 file changed, 645 insertions(+) create mode 100644 drivers/media/usb/em28xx/em28xx-input.c (limited to 'drivers/media/usb/em28xx/em28xx-input.c') diff --git a/drivers/media/usb/em28xx/em28xx-input.c b/drivers/media/usb/em28xx/em28xx-input.c new file mode 100644 index 00000000000..97d36b4f19d --- /dev/null +++ b/drivers/media/usb/em28xx/em28xx-input.c @@ -0,0 +1,645 @@ +/* + handle em28xx IR remotes via linux kernel input layer. + + Copyright (C) 2005 Ludovico Cavedon + Markus Rechberger + Mauro Carvalho Chehab + Sascha Sommer + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include "em28xx.h" + +#define EM28XX_SNAPSHOT_KEY KEY_CAMERA +#define EM28XX_SBUTTON_QUERY_INTERVAL 500 +#define EM28XX_R0C_USBSUSP_SNAPSHOT 0x20 + +static unsigned int ir_debug; +module_param(ir_debug, int, 0644); +MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]"); + +#define MODULE_NAME "em28xx" + +#define i2cdprintk(fmt, arg...) \ + if (ir_debug) { \ + printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \ + } + +#define dprintk(fmt, arg...) \ + if (ir_debug) { \ + printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \ + } + +/********************************************************** + Polling structure used by em28xx IR's + **********************************************************/ + +struct em28xx_ir_poll_result { + unsigned int toggle_bit:1; + unsigned int read_count:7; + u8 rc_address; + u8 rc_data[4]; /* 1 byte on em2860/2880, 4 on em2874 */ +}; + +struct em28xx_IR { + struct em28xx *dev; + struct rc_dev *rc; + char name[32]; + char phys[32]; + + /* poll external decoder */ + int polling; + struct delayed_work work; + unsigned int full_code:1; + unsigned int last_readcount; + + int (*get_key)(struct em28xx_IR *, struct em28xx_ir_poll_result *); +}; + +/********************************************************** + I2C IR based get keycodes - should be used with ir-kbd-i2c + **********************************************************/ + +static int em28xx_get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) +{ + unsigned char b; + + /* poll IR chip */ + if (1 != i2c_master_recv(ir->c, &b, 1)) { + i2cdprintk("read error\n"); + return -EIO; + } + + /* it seems that 0xFE indicates that a button is still hold + down, while 0xff indicates that no button is hold + down. 0xfe sequences are sometimes interrupted by 0xFF */ + + i2cdprintk("key %02x\n", b); + + if (b == 0xff) + return 0; + + if (b == 0xfe) + /* keep old data */ + return 1; + + *ir_key = b; + *ir_raw = b; + return 1; +} + +static int em28xx_get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) +{ + unsigned char buf[2]; + u16 code; + int size; + + /* poll IR chip */ + size = i2c_master_recv(ir->c, buf, sizeof(buf)); + + if (size != 2) + return -EIO; + + /* Does eliminate repeated parity code */ + if (buf[1] == 0xff) + return 0; + + ir->old = buf[1]; + + /* + * Rearranges bits to the right order. + * The bit order were determined experimentally by using + * The original Hauppauge Grey IR and another RC5 that uses addr=0x08 + * The RC5 code has 14 bits, but we've experimentally determined + * the meaning for only 11 bits. + * So, the code translation is not complete. Yet, it is enough to + * work with the provided RC5 IR. + */ + code = + ((buf[0] & 0x01) ? 0x0020 : 0) | /* 0010 0000 */ + ((buf[0] & 0x02) ? 0x0010 : 0) | /* 0001 0000 */ + ((buf[0] & 0x04) ? 0x0008 : 0) | /* 0000 1000 */ + ((buf[0] & 0x08) ? 0x0004 : 0) | /* 0000 0100 */ + ((buf[0] & 0x10) ? 0x0002 : 0) | /* 0000 0010 */ + ((buf[0] & 0x20) ? 0x0001 : 0) | /* 0000 0001 */ + ((buf[1] & 0x08) ? 0x1000 : 0) | /* 0001 0000 */ + ((buf[1] & 0x10) ? 0x0800 : 0) | /* 0000 1000 */ + ((buf[1] & 0x20) ? 0x0400 : 0) | /* 0000 0100 */ + ((buf[1] & 0x40) ? 0x0200 : 0) | /* 0000 0010 */ + ((buf[1] & 0x80) ? 0x0100 : 0); /* 0000 0001 */ + + i2cdprintk("ir hauppauge (em2840): code=0x%02x (rcv=0x%02x%02x)\n", + code, buf[1], buf[0]); + + /* return key */ + *ir_key = code; + *ir_raw = code; + return 1; +} + +static int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key, + u32 *ir_raw) +{ + unsigned char buf[3]; + + /* poll IR chip */ + + if (3 != i2c_master_recv(ir->c, buf, 3)) { + i2cdprintk("read error\n"); + return -EIO; + } + + i2cdprintk("key %02x\n", buf[2]&0x3f); + if (buf[0] != 0x00) + return 0; + + *ir_key = buf[2]&0x3f; + *ir_raw = buf[2]&0x3f; + + return 1; +} + +static int em28xx_get_key_winfast_usbii_deluxe(struct IR_i2c *ir, u32 *ir_key, + u32 *ir_raw) +{ + unsigned char subaddr, keydetect, key; + + struct i2c_msg msg[] = { { .addr = ir->c->addr, .flags = 0, .buf = &subaddr, .len = 1}, + + { .addr = ir->c->addr, .flags = I2C_M_RD, .buf = &keydetect, .len = 1} }; + + subaddr = 0x10; + if (2 != i2c_transfer(ir->c->adapter, msg, 2)) { + i2cdprintk("read error\n"); + return -EIO; + } + if (keydetect == 0x00) + return 0; + + subaddr = 0x00; + msg[1].buf = &key; + if (2 != i2c_transfer(ir->c->adapter, msg, 2)) { + i2cdprintk("read error\n"); + return -EIO; + } + if (key == 0x00) + return 0; + + *ir_key = key; + *ir_raw = key; + return 1; +} + +/********************************************************** + Poll based get keycode functions + **********************************************************/ + +/* This is for the em2860/em2880 */ +static int default_polling_getkey(struct em28xx_IR *ir, + struct em28xx_ir_poll_result *poll_result) +{ + struct em28xx *dev = ir->dev; + int rc; + u8 msg[3] = { 0, 0, 0 }; + + /* Read key toggle, brand, and key code + on registers 0x45, 0x46 and 0x47 + */ + rc = dev->em28xx_read_reg_req_len(dev, 0, EM28XX_R45_IR, + msg, sizeof(msg)); + if (rc < 0) + return rc; + + /* Infrared toggle (Reg 0x45[7]) */ + poll_result->toggle_bit = (msg[0] >> 7); + + /* Infrared read count (Reg 0x45[6:0] */ + poll_result->read_count = (msg[0] & 0x7f); + + /* Remote Control Address (Reg 0x46) */ + poll_result->rc_address = msg[1]; + + /* Remote Control Data (Reg 0x47) */ + poll_result->rc_data[0] = msg[2]; + + return 0; +} + +static int em2874_polling_getkey(struct em28xx_IR *ir, + struct em28xx_ir_poll_result *poll_result) +{ + struct em28xx *dev = ir->dev; + int rc; + u8 msg[5] = { 0, 0, 0, 0, 0 }; + + /* Read key toggle, brand, and key code + on registers 0x51-55 + */ + rc = dev->em28xx_read_reg_req_len(dev, 0, EM2874_R51_IR, + msg, sizeof(msg)); + if (rc < 0) + return rc; + + /* Infrared toggle (Reg 0x51[7]) */ + poll_result->toggle_bit = (msg[0] >> 7); + + /* Infrared read count (Reg 0x51[6:0] */ + poll_result->read_count = (msg[0] & 0x7f); + + /* Remote Control Address (Reg 0x52) */ + poll_result->rc_address = msg[1]; + + /* Remote Control Data (Reg 0x53-55) */ + poll_result->rc_data[0] = msg[2]; + poll_result->rc_data[1] = msg[3]; + poll_result->rc_data[2] = msg[4]; + + return 0; +} + +/********************************************************** + Polling code for em28xx + **********************************************************/ + +static void em28xx_ir_handle_key(struct em28xx_IR *ir) +{ + int result; + struct em28xx_ir_poll_result poll_result; + + /* read the registers containing the IR status */ + result = ir->get_key(ir, &poll_result); + if (unlikely(result < 0)) { + dprintk("ir->get_key() failed %d\n", result); + return; + } + + if (unlikely(poll_result.read_count != ir->last_readcount)) { + dprintk("%s: toggle: %d, count: %d, key 0x%02x%02x\n", __func__, + poll_result.toggle_bit, poll_result.read_count, + poll_result.rc_address, poll_result.rc_data[0]); + if (ir->full_code) + rc_keydown(ir->rc, + poll_result.rc_address << 8 | + poll_result.rc_data[0], + poll_result.toggle_bit); + else + rc_keydown(ir->rc, + poll_result.rc_data[0], + poll_result.toggle_bit); + + if (ir->dev->chip_id == CHIP_ID_EM2874 || + ir->dev->chip_id == CHIP_ID_EM2884) + /* The em2874 clears the readcount field every time the + register is read. The em2860/2880 datasheet says that it + is supposed to clear the readcount, but it doesn't. So with + the em2874, we are looking for a non-zero read count as + opposed to a readcount that is incrementing */ + ir->last_readcount = 0; + else + ir->last_readcount = poll_result.read_count; + } +} + +static void em28xx_ir_work(struct work_struct *work) +{ + struct em28xx_IR *ir = container_of(work, struct em28xx_IR, work.work); + + em28xx_ir_handle_key(ir); + schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling)); +} + +static int em28xx_ir_start(struct rc_dev *rc) +{ + struct em28xx_IR *ir = rc->priv; + + INIT_DELAYED_WORK(&ir->work, em28xx_ir_work); + schedule_delayed_work(&ir->work, 0); + + return 0; +} + +static void em28xx_ir_stop(struct rc_dev *rc) +{ + struct em28xx_IR *ir = rc->priv; + + cancel_delayed_work_sync(&ir->work); +} + +static int em28xx_ir_change_protocol(struct rc_dev *rc_dev, u64 rc_type) +{ + int rc = 0; + struct em28xx_IR *ir = rc_dev->priv; + struct em28xx *dev = ir->dev; + u8 ir_config = EM2874_IR_RC5; + + /* Adjust xclk based o IR table for RC5/NEC tables */ + + if (rc_type == RC_TYPE_RC5) { + dev->board.xclk |= EM28XX_XCLK_IR_RC5_MODE; + ir->full_code = 1; + } else if (rc_type == RC_TYPE_NEC) { + dev->board.xclk &= ~EM28XX_XCLK_IR_RC5_MODE; + ir_config = EM2874_IR_NEC; + ir->full_code = 1; + } else if (rc_type != RC_TYPE_UNKNOWN) + rc = -EINVAL; + + em28xx_write_reg_bits(dev, EM28XX_R0F_XCLK, dev->board.xclk, + EM28XX_XCLK_IR_RC5_MODE); + + /* Setup the proper handler based on the chip */ + switch (dev->chip_id) { + case CHIP_ID_EM2860: + case CHIP_ID_EM2883: + ir->get_key = default_polling_getkey; + break; + case CHIP_ID_EM2884: + case CHIP_ID_EM2874: + case CHIP_ID_EM28174: + ir->get_key = em2874_polling_getkey; + em28xx_write_regs(dev, EM2874_R50_IR_CONFIG, &ir_config, 1); + break; + default: + printk("Unrecognized em28xx chip id 0x%02x: IR not supported\n", + dev->chip_id); + rc = -EINVAL; + } + + return rc; +} + +static void em28xx_register_i2c_ir(struct em28xx *dev) +{ + /* Leadtek winfast tv USBII deluxe can find a non working IR-device */ + /* at address 0x18, so if that address is needed for another board in */ + /* the future, please put it after 0x1f. */ + struct i2c_board_info info; + const unsigned short addr_list[] = { + 0x1f, 0x30, 0x47, I2C_CLIENT_END + }; + + memset(&info, 0, sizeof(struct i2c_board_info)); + memset(&dev->init_data, 0, sizeof(dev->init_data)); + strlcpy(info.type, "ir_video", I2C_NAME_SIZE); + + /* detect & configure */ + switch (dev->model) { + case EM2800_BOARD_TERRATEC_CINERGY_200: + case EM2820_BOARD_TERRATEC_CINERGY_250: + dev->init_data.ir_codes = RC_MAP_EM_TERRATEC; + dev->init_data.get_key = em28xx_get_key_terratec; + dev->init_data.name = "i2c IR (EM28XX Terratec)"; + break; + case EM2820_BOARD_PINNACLE_USB_2: + dev->init_data.ir_codes = RC_MAP_PINNACLE_GREY; + dev->init_data.get_key = em28xx_get_key_pinnacle_usb_grey; + dev->init_data.name = "i2c IR (EM28XX Pinnacle PCTV)"; + break; + case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2: + dev->init_data.ir_codes = RC_MAP_HAUPPAUGE; + dev->init_data.get_key = em28xx_get_key_em_haup; + dev->init_data.name = "i2c IR (EM2840 Hauppauge)"; + break; + case EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE: + dev->init_data.ir_codes = RC_MAP_WINFAST_USBII_DELUXE; + dev->init_data.get_key = em28xx_get_key_winfast_usbii_deluxe; + dev->init_data.name = "i2c IR (EM2820 Winfast TV USBII Deluxe)"; + break; + } + + if (dev->init_data.name) + info.platform_data = &dev->init_data; + i2c_new_probed_device(&dev->i2c_adap, &info, addr_list, NULL); +} + +/********************************************************** + Handle Webcam snapshot button + **********************************************************/ + +static void em28xx_query_sbutton(struct work_struct *work) +{ + /* Poll the register and see if the button is depressed */ + struct em28xx *dev = + container_of(work, struct em28xx, sbutton_query_work.work); + int ret; + + ret = em28xx_read_reg(dev, EM28XX_R0C_USBSUSP); + + if (ret & EM28XX_R0C_USBSUSP_SNAPSHOT) { + u8 cleared; + /* Button is depressed, clear the register */ + cleared = ((u8) ret) & ~EM28XX_R0C_USBSUSP_SNAPSHOT; + em28xx_write_regs(dev, EM28XX_R0C_USBSUSP, &cleared, 1); + + /* Not emulate the keypress */ + input_report_key(dev->sbutton_input_dev, EM28XX_SNAPSHOT_KEY, + 1); + /* Now unpress the key */ + input_report_key(dev->sbutton_input_dev, EM28XX_SNAPSHOT_KEY, + 0); + } + + /* Schedule next poll */ + schedule_delayed_work(&dev->sbutton_query_work, + msecs_to_jiffies(EM28XX_SBUTTON_QUERY_INTERVAL)); +} + +static void em28xx_register_snapshot_button(struct em28xx *dev) +{ + struct input_dev *input_dev; + int err; + + em28xx_info("Registering snapshot button...\n"); + input_dev = input_allocate_device(); + if (!input_dev) { + em28xx_errdev("input_allocate_device failed\n"); + return; + } + + usb_make_path(dev->udev, dev->snapshot_button_path, + sizeof(dev->snapshot_button_path)); + strlcat(dev->snapshot_button_path, "/sbutton", + sizeof(dev->snapshot_button_path)); + INIT_DELAYED_WORK(&dev->sbutton_query_work, em28xx_query_sbutton); + + input_dev->name = "em28xx snapshot button"; + input_dev->phys = dev->snapshot_button_path; + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + set_bit(EM28XX_SNAPSHOT_KEY, input_dev->keybit); + input_dev->keycodesize = 0; + input_dev->keycodemax = 0; + input_dev->id.bustype = BUS_USB; + input_dev->id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor); + input_dev->id.product = le16_to_cpu(dev->udev->descriptor.idProduct); + input_dev->id.version = 1; + input_dev->dev.parent = &dev->udev->dev; + + err = input_register_device(input_dev); + if (err) { + em28xx_errdev("input_register_device failed\n"); + input_free_device(input_dev); + return; + } + + dev->sbutton_input_dev = input_dev; + schedule_delayed_work(&dev->sbutton_query_work, + msecs_to_jiffies(EM28XX_SBUTTON_QUERY_INTERVAL)); + return; + +} + +static void em28xx_deregister_snapshot_button(struct em28xx *dev) +{ + if (dev->sbutton_input_dev != NULL) { + em28xx_info("Deregistering snapshot button\n"); + cancel_delayed_work_sync(&dev->sbutton_query_work); + input_unregister_device(dev->sbutton_input_dev); + dev->sbutton_input_dev = NULL; + } + return; +} + +static int em28xx_ir_init(struct em28xx *dev) +{ + struct em28xx_IR *ir; + struct rc_dev *rc; + int err = -ENOMEM; + + if (dev->board.ir_codes == NULL) { + /* No remote control support */ + em28xx_warn("Remote control support is not available for " + "this card.\n"); + return 0; + } + + ir = kzalloc(sizeof(*ir), GFP_KERNEL); + rc = rc_allocate_device(); + if (!ir || !rc) + goto err_out_free; + + /* record handles to ourself */ + ir->dev = dev; + dev->ir = ir; + ir->rc = rc; + + /* + * em2874 supports more protocols. For now, let's just announce + * the two protocols that were already tested + */ + rc->allowed_protos = RC_TYPE_RC5 | RC_TYPE_NEC; + rc->priv = ir; + rc->change_protocol = em28xx_ir_change_protocol; + rc->open = em28xx_ir_start; + rc->close = em28xx_ir_stop; + + /* By default, keep protocol field untouched */ + err = em28xx_ir_change_protocol(rc, RC_TYPE_UNKNOWN); + if (err) + goto err_out_free; + + /* This is how often we ask the chip for IR information */ + ir->polling = 100; /* ms */ + + /* init input device */ + snprintf(ir->name, sizeof(ir->name), "em28xx IR (%s)", + dev->name); + + usb_make_path(dev->udev, ir->phys, sizeof(ir->phys)); + strlcat(ir->phys, "/input0", sizeof(ir->phys)); + + rc->input_name = ir->name; + rc->input_phys = ir->phys; + rc->input_id.bustype = BUS_USB; + rc->input_id.version = 1; + rc->input_id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor); + rc->input_id.product = le16_to_cpu(dev->udev->descriptor.idProduct); + rc->dev.parent = &dev->udev->dev; + rc->map_name = dev->board.ir_codes; + rc->driver_name = MODULE_NAME; + + /* all done */ + err = rc_register_device(rc); + if (err) + goto err_out_stop; + + em28xx_register_i2c_ir(dev); + +#if defined(CONFIG_MODULES) && defined(MODULE) + if (dev->board.has_ir_i2c) + request_module("ir-kbd-i2c"); +#endif + if (dev->board.has_snapshot_button) + em28xx_register_snapshot_button(dev); + + return 0; + + err_out_stop: + dev->ir = NULL; + err_out_free: + rc_free_device(rc); + kfree(ir); + return err; +} + +static int em28xx_ir_fini(struct em28xx *dev) +{ + struct em28xx_IR *ir = dev->ir; + + em28xx_deregister_snapshot_button(dev); + + /* skip detach on non attached boards */ + if (!ir) + return 0; + + if (ir->rc) + rc_unregister_device(ir->rc); + + /* done */ + kfree(ir); + dev->ir = NULL; + return 0; +} + +static struct em28xx_ops rc_ops = { + .id = EM28XX_RC, + .name = "Em28xx Input Extension", + .init = em28xx_ir_init, + .fini = em28xx_ir_fini, +}; + +static int __init em28xx_rc_register(void) +{ + return em28xx_register_extension(&rc_ops); +} + +static void __exit em28xx_rc_unregister(void) +{ + em28xx_unregister_extension(&rc_ops); +} + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab "); +MODULE_DESCRIPTION("Em28xx Input driver"); + +module_init(em28xx_rc_register); +module_exit(em28xx_rc_unregister); -- cgit v1.2.3-70-g09d2