From 7c1dfdb059505fee12eaf089070145febd9e5ecf Mon Sep 17 00:00:00 2001
From: Jakob Haufe <sur5r@sur5r.net>
Date: Sat, 13 Apr 2013 11:03:37 -0300
Subject: [media] em28xx: Add support for 1b80:e1cc Delock 61959

Hardware is the same as MaxMedia UB425-TC but ships with a different
remote.

Signed-off-by: Jakob Haufe <sur5r@sur5r.net>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/em28xx/em28xx-cards.c | 16 ++++++++++++++++
 drivers/media/usb/em28xx/em28xx-dvb.c   |  5 +++--
 drivers/media/usb/em28xx/em28xx.h       |  1 +
 3 files changed, 20 insertions(+), 2 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index 83bfbe4c980..927956b4dca 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -374,6 +374,7 @@ static struct em28xx_reg_seq hauppauge_930c_digital[] = {
 #endif
 
 /* 1b80:e425 MaxMedia UB425-TC
+ * 1b80:e1cc Delock 61959
  * GPIO_6 - demod reset, 0=active
  * GPIO_7 - LED, 0=active
  */
@@ -2017,6 +2018,19 @@ struct em28xx_board em28xx_boards[] = {
 		.i2c_speed    = EM28XX_I2C_CLK_WAIT_ENABLE |
 				EM28XX_I2C_FREQ_400_KHZ,
 	},
+	/* 1b80:e1cc Delock 61959
+	 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2
+         * mostly the same as MaxMedia UB-425-TC but different remote */
+	[EM2874_BOARD_DELOCK_61959] = {
+		.name          = "Delock 61959",
+		.tuner_type    = TUNER_ABSENT,
+		.tuner_gpio    = maxmedia_ub425_tc,
+		.has_dvb       = 1,
+		.ir_codes      = RC_MAP_DELOCK_61959,
+		.def_i2c_bus   = 1,
+		.i2c_speed     = EM28XX_I2C_CLK_WAIT_ENABLE |
+				EM28XX_I2C_FREQ_400_KHZ,
+	},
 };
 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
 
@@ -2178,6 +2192,8 @@ struct usb_device_id em28xx_id_table[] = {
 			.driver_info = EM2884_BOARD_PCTV_510E },
 	{ USB_DEVICE(0x2013, 0x0251),
 			.driver_info = EM2884_BOARD_PCTV_520E },
+	{ USB_DEVICE(0x1b80, 0xe1cc),
+			.driver_info = EM2874_BOARD_DELOCK_61959 },
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
diff --git a/drivers/media/usb/em28xx/em28xx-dvb.c b/drivers/media/usb/em28xx/em28xx-dvb.c
index b22f8fed812..42ede686ab6 100644
--- a/drivers/media/usb/em28xx/em28xx-dvb.c
+++ b/drivers/media/usb/em28xx/em28xx-dvb.c
@@ -1216,6 +1216,7 @@ static int em28xx_dvb_init(struct em28xx *dev)
 			dvb_attach(a8293_attach, dvb->fe[0], &dev->i2c_adap[dev->def_i2c_bus],
 				&em28xx_a8293_config);
 		break;
+	case EM2874_BOARD_DELOCK_61959:
 	case EM2874_BOARD_MAXMEDIA_UB425_TC:
 		/* attach demodulator */
 		dvb->fe[0] = dvb_attach(drxk_attach, &maxmedia_ub425_tc_drxk,
@@ -1235,8 +1236,8 @@ static int em28xx_dvb_init(struct em28xx *dev)
 		}
 
 		/* TODO: we need drx-3913k firmware in order to support DVB-T */
-		em28xx_info("MaxMedia UB425-TC: only DVB-C supported by that " \
-				"driver version\n");
+		em28xx_info("MaxMedia UB425-TC/Delock 61959: only DVB-C " \
+				"supported by that driver version\n");
 
 		break;
 	case EM2884_BOARD_PCTV_510E:
diff --git a/drivers/media/usb/em28xx/em28xx.h b/drivers/media/usb/em28xx/em28xx.h
index a9323b63d8e..59a95802aa6 100644
--- a/drivers/media/usb/em28xx/em28xx.h
+++ b/drivers/media/usb/em28xx/em28xx.h
@@ -130,6 +130,7 @@
 #define EM2884_BOARD_PCTV_520E			  86
 #define EM2884_BOARD_TERRATEC_HTC_USB_XS	  87
 #define EM2884_BOARD_C3TECH_DIGITAL_DUO		  88
+#define EM2874_BOARD_DELOCK_61959		  89
 
 /* Limits minimum and default number of buffers */
 #define EM28XX_MIN_BUF 4
-- 
cgit v1.2.3-70-g09d2


From ccc40ed7555d053f60328e9742e559fb75e85002 Mon Sep 17 00:00:00 2001
From: Leonid Kegulskiy <leo@lumanate.com>
Date: Thu, 25 Apr 2013 05:59:54 -0300
Subject: [media] hdpvr: Removed unnecessary get_video_info() call from
 hdpvr_device_init()

Signed-off-by: Leonid Kegulskiy <leo@lumanate.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/hdpvr/hdpvr-core.c | 8 --------
 1 file changed, 8 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/hdpvr/hdpvr-core.c b/drivers/media/usb/hdpvr/hdpvr-core.c
index 8247c19d626..cb694055ba7 100644
--- a/drivers/media/usb/hdpvr/hdpvr-core.c
+++ b/drivers/media/usb/hdpvr/hdpvr-core.c
@@ -220,7 +220,6 @@ static int hdpvr_device_init(struct hdpvr_device *dev)
 {
 	int ret;
 	u8 *buf;
-	struct hdpvr_video_info *vidinf;
 
 	if (device_authorization(dev))
 		return -EACCES;
@@ -242,13 +241,6 @@ static int hdpvr_device_init(struct hdpvr_device *dev)
 		 "control request returned %d\n", ret);
 	mutex_unlock(&dev->usbc_mutex);
 
-	vidinf = get_video_info(dev);
-	if (!vidinf)
-		v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev,
-			"no valid video signal or device init failed\n");
-	else
-		kfree(vidinf);
-
 	/* enable fan and bling leds */
 	mutex_lock(&dev->usbc_mutex);
 	buf[0] = 0x1;
-- 
cgit v1.2.3-70-g09d2


From f74368769048a803e7a7a3dac6434833f563d3bd Mon Sep 17 00:00:00 2001
From: Leonid Kegulskiy <leo@lumanate.com>
Date: Thu, 25 Apr 2013 05:59:56 -0300
Subject: [media] hdpvr: Added some error handling in hdpvr_start_streaming()

Signed-off-by: Leonid Kegulskiy <leo@lumanate.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/hdpvr/hdpvr-video.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/hdpvr/hdpvr-video.c b/drivers/media/usb/hdpvr/hdpvr-video.c
index 774ba0e820b..cd90ba81a5b 100644
--- a/drivers/media/usb/hdpvr/hdpvr-video.c
+++ b/drivers/media/usb/hdpvr/hdpvr-video.c
@@ -298,8 +298,12 @@ static int hdpvr_start_streaming(struct hdpvr_device *dev)
 				      0xb8, 0x38, 0x1, 0, NULL, 0, 8000);
 		v4l2_dbg(MSG_BUFFER, hdpvr_debug, &dev->v4l2_dev,
 			 "encoder start control request returned %d\n", ret);
+		if (ret < 0)
+			return ret;
 
-		hdpvr_config_call(dev, CTRL_START_STREAMING_VALUE, 0x00);
+		ret = hdpvr_config_call(dev, CTRL_START_STREAMING_VALUE, 0x00);
+		if (ret)
+			return ret;
 
 		dev->status = STATUS_STREAMING;
 
-- 
cgit v1.2.3-70-g09d2


From a0f9354b1a319cb29c331bfd2e5a15d7f9b87fa4 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <rdunlap@infradead.org>
Date: Wed, 8 May 2013 17:28:13 -0300
Subject: [media] media/usb: fix kconfig dependencies

(a.k.a. Kconfig bool depending on a tristate considered harmful)
Fix various build errors when CONFIG_USB=m and media USB drivers
are builtin.  In this case, CONFIG_USB_ZR364XX=y,
CONFIG_VIDEO_PVRUSB2=y, and CONFIG_VIDEO_STK1160=y.
This is caused by (from drivers/media/usb/Kconfig):
menuconfig MEDIA_USB_SUPPORT
	bool "Media USB Adapters"
	depends on USB && MEDIA_SUPPORT
	           =m     =y
so MEDIA_USB_SUPPORT=y and all following Kconfig 'source' lines
are included.  By adding an "if USB" guard around most of this file,
the needed dependencies are enforced.
drivers/built-in.o: In function `zr364xx_start_readpipe':
zr364xx.c:(.text+0xc726a): undefined reference to `usb_alloc_urb'
zr364xx.c:(.text+0xc72bb): undefined reference to `usb_submit_urb'
drivers/built-in.o: In function `zr364xx_stop_readpipe':
zr364xx.c:(.text+0xc72fd): undefined reference to `usb_kill_urb'
zr364xx.c:(.text+0xc7309): undefined reference to `usb_free_urb'
drivers/built-in.o: In function `read_pipe_completion':
zr364xx.c:(.text+0xc7acc): undefined reference to `usb_submit_urb'
drivers/built-in.o: In function `send_control_msg.constprop.12':
zr364xx.c:(.text+0xc7d2f): undefined reference to `usb_control_msg'
drivers/built-in.o: In function `pvr2_ctl_timeout':
pvrusb2-hdw.c:(.text+0xcadb6): undefined reference to `usb_unlink_urb'
pvrusb2-hdw.c:(.text+0xcadcb): undefined reference to `usb_unlink_urb'
drivers/built-in.o: In function `pvr2_hdw_create':
(.text+0xcc42c): undefined reference to `usb_alloc_urb'
drivers/built-in.o: In function `pvr2_hdw_create':
(.text+0xcc448): undefined reference to `usb_alloc_urb'
drivers/built-in.o: In function `pvr2_hdw_create':
(.text+0xcc5f9): undefined reference to `usb_set_interface'
drivers/built-in.o: In function `pvr2_hdw_create':
(.text+0xcc65a): undefined reference to `usb_free_urb'
drivers/built-in.o: In function `pvr2_hdw_create':
(.text+0xcc666): undefined reference to `usb_free_urb'
drivers/built-in.o: In function `pvr2_send_request_ex.part.22':
pvrusb2-hdw.c:(.text+0xccbe3): undefined reference to `usb_submit_urb'
pvrusb2-hdw.c:(.text+0xccc83): undefined reference to `usb_submit_urb'
drivers/built-in.o: In function `pvr2_hdw_remove_usb_stuff.part.25':
pvrusb2-hdw.c:(.text+0xcd3f9): undefined reference to `usb_kill_urb'
pvrusb2-hdw.c:(.text+0xcd405): undefined reference to `usb_free_urb'
pvrusb2-hdw.c:(.text+0xcd421): undefined reference to `usb_kill_urb'
pvrusb2-hdw.c:(.text+0xcd42d): undefined reference to `usb_free_urb'
drivers/built-in.o: In function `pvr2_hdw_device_reset':
(.text+0xcd658): undefined reference to `usb_lock_device_for_reset'
drivers/built-in.o: In function `pvr2_hdw_device_reset':
(.text+0xcd664): undefined reference to `usb_reset_device'
drivers/built-in.o: In function `pvr2_hdw_cpureset_assert':
(.text+0xcd6f9): undefined reference to `usb_control_msg'
drivers/built-in.o: In function `pvr2_hdw_cpufw_set_enabled':
(.text+0xcd84e): undefined reference to `usb_control_msg'
drivers/built-in.o: In function `pvr2_upload_firmware1':
pvrusb2-hdw.c:(.text+0xcda47): undefined reference to `usb_clear_halt'
pvrusb2-hdw.c:(.text+0xcdb04): undefined reference to `usb_control_msg'
drivers/built-in.o: In function `pvr2_upload_firmware2':
(.text+0xce7dc): undefined reference to `usb_bulk_msg'
drivers/built-in.o: In function `pvr2_stream_buffer_count':
pvrusb2-io.c:(.text+0xd2e05): undefined reference to `usb_alloc_urb'
pvrusb2-io.c:(.text+0xd2e5b): undefined reference to `usb_kill_urb'
pvrusb2-io.c:(.text+0xd2e9f): undefined reference to `usb_free_urb'
drivers/built-in.o: In function `pvr2_stream_internal_flush':
pvrusb2-io.c:(.text+0xd2f9b): undefined reference to `usb_kill_urb'
drivers/built-in.o: In function `pvr2_buffer_queue':
(.text+0xd3328): undefined reference to `usb_kill_urb'
drivers/built-in.o: In function `pvr2_buffer_queue':
(.text+0xd33ea): undefined reference to `usb_submit_urb'
drivers/built-in.o: In function `stk1160_read_reg':
(.text+0xd3efa): undefined reference to `usb_control_msg'
drivers/built-in.o: In function `stk1160_write_reg':
(.text+0xd3f4f): undefined reference to `usb_control_msg'
drivers/built-in.o: In function `stop_streaming':
stk1160-v4l.c:(.text+0xd4997): undefined reference to `usb_set_interface'
drivers/built-in.o: In function `start_streaming':
stk1160-v4l.c:(.text+0xd4a9f): undefined reference to `usb_set_interface'
stk1160-v4l.c:(.text+0xd4afa): undefined reference to `usb_submit_urb'
stk1160-v4l.c:(.text+0xd4ba3): undefined reference to `usb_set_interface'
drivers/built-in.o: In function `stk1160_isoc_irq':
stk1160-video.c:(.text+0xd509b): undefined reference to `usb_submit_urb'
drivers/built-in.o: In function `stk1160_cancel_isoc':
(.text+0xd50ef): undefined reference to `usb_kill_urb'
drivers/built-in.o: In function `stk1160_free_isoc':
(.text+0xd5155): undefined reference to `usb_free_coherent'
drivers/built-in.o: In function `stk1160_free_isoc':
(.text+0xd515d): undefined reference to `usb_free_urb'
drivers/built-in.o: In function `stk1160_alloc_isoc':
(.text+0xd5278): undefined reference to `usb_alloc_urb'
drivers/built-in.o: In function `stk1160_alloc_isoc':
(.text+0xd52c2): undefined reference to `usb_alloc_coherent'
drivers/built-in.o: In function `stk1160_alloc_isoc':
(.text+0xd53c4): undefined reference to `usb_free_urb'
drivers/built-in.o: In function `zr364xx_driver_init':
zr364xx.c:(.init.text+0x463e): undefined reference to `usb_register_driver'
drivers/built-in.o: In function `pvr_init':
pvrusb2-main.c:(.init.text+0x4662): undefined reference to `usb_register_driver'
drivers/built-in.o: In function `stk1160_usb_driver_init':
stk1160-core.c:(.init.text+0x467d): undefined reference to `usb_register_driver'
drivers/built-in.o: In function `zr364xx_driver_exit':
zr364xx.c:(.exit.text+0x1377): undefined reference to `usb_deregister'
drivers/built-in.o: In function `pvr_exit':
pvrusb2-main.c:(.exit.text+0x1389): undefined reference to `usb_deregister'
drivers/built-in.o: In function `stk1160_usb_driver_exit':
stk1160-core.c:(.exit.text+0x13a0): undefined reference to `usb_deregister'

Suggested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/Kconfig | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/Kconfig b/drivers/media/usb/Kconfig
index 0a7d520636a..0d8fe005d1f 100644
--- a/drivers/media/usb/Kconfig
+++ b/drivers/media/usb/Kconfig
@@ -1,6 +1,8 @@
+if USB
+
 menuconfig MEDIA_USB_SUPPORT
 	bool "Media USB Adapters"
-	depends on USB && MEDIA_SUPPORT
+	depends on MEDIA_SUPPORT
 	help
 	  Enable media drivers for USB bus.
 	  If you have such devices, say Y.
@@ -52,3 +54,4 @@ source "drivers/media/usb/em28xx/Kconfig"
 endif
 
 endif #MEDIA_USB_SUPPORT
+endif #USB
-- 
cgit v1.2.3-70-g09d2


From 0735647c29bca5f33f38fcf457b3b0e9e5912f51 Mon Sep 17 00:00:00 2001
From: Reinhard Nissl <rnissl@gmx.de>
Date: Wed, 8 May 2013 17:54:57 -0300
Subject: [media] stb0899: remove commented value from IQ_SWAP_ON/OFF usages
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

As the enum values have changed recently, the comments are void.

Signed-off-by: Reinhard Nißl <rnissl@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/pci/mantis/mantis_vp1041.c | 2 +-
 drivers/media/pci/ttpci/budget-av.c      | 2 +-
 drivers/media/pci/ttpci/budget-ci.c      | 2 +-
 drivers/media/usb/dvb-usb/az6027.c       | 2 +-
 drivers/media/usb/dvb-usb/pctv452e.c     | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/pci/mantis/mantis_vp1041.c b/drivers/media/pci/mantis/mantis_vp1041.c
index 07aa887a4b4..07a20748b70 100644
--- a/drivers/media/pci/mantis/mantis_vp1041.c
+++ b/drivers/media/pci/mantis/mantis_vp1041.c
@@ -273,7 +273,7 @@ struct stb0899_config vp1041_stb0899_config = {
 	.demod_address 		= 0x68, /*  0xd0 >> 1 */
 
 	.xtal_freq		= 27000000,
-	.inversion		= IQ_SWAP_ON, /* 1 */
+	.inversion		= IQ_SWAP_ON,
 
 	.lo_clk			= 76500000,
 	.hi_clk			= 99000000,
diff --git a/drivers/media/pci/ttpci/budget-av.c b/drivers/media/pci/ttpci/budget-av.c
index 1f8b1bb0bf9..0ba3875af22 100644
--- a/drivers/media/pci/ttpci/budget-av.c
+++ b/drivers/media/pci/ttpci/budget-av.c
@@ -1128,7 +1128,7 @@ static struct stb0899_config knc1_dvbs2_config = {
 //	.ts_pfbit_toggle	= STB0899_MPEG_NORMAL,	/* DirecTV, MPEG toggling seq	*/
 
 	.xtal_freq		= 27000000,
-	.inversion		= IQ_SWAP_OFF, /* 1 */
+	.inversion		= IQ_SWAP_OFF,
 
 	.lo_clk			= 76500000,
 	.hi_clk			= 90000000,
diff --git a/drivers/media/pci/ttpci/budget-ci.c b/drivers/media/pci/ttpci/budget-ci.c
index 98e52417876..0acf9202103 100644
--- a/drivers/media/pci/ttpci/budget-ci.c
+++ b/drivers/media/pci/ttpci/budget-ci.c
@@ -1280,7 +1280,7 @@ static struct stb0899_config tt3200_config = {
 	.demod_address 		= 0x68,
 
 	.xtal_freq		= 27000000,
-	.inversion		= IQ_SWAP_ON, /* 1 */
+	.inversion		= IQ_SWAP_ON,
 
 	.lo_clk			= 76500000,
 	.hi_clk			= 99000000,
diff --git a/drivers/media/usb/dvb-usb/az6027.c b/drivers/media/usb/dvb-usb/az6027.c
index 91e0119e8a8..ea2d5ee8657 100644
--- a/drivers/media/usb/dvb-usb/az6027.c
+++ b/drivers/media/usb/dvb-usb/az6027.c
@@ -264,7 +264,7 @@ struct stb0899_config az6027_stb0899_config = {
 	.demod_address 		= 0xd0, /* 0x68, 0xd0 >> 1 */
 
 	.xtal_freq		= 27000000,
-	.inversion		= IQ_SWAP_ON, /* 1 */
+	.inversion		= IQ_SWAP_ON,
 
 	.lo_clk			= 76500000,
 	.hi_clk			= 99000000,
diff --git a/drivers/media/usb/dvb-usb/pctv452e.c b/drivers/media/usb/dvb-usb/pctv452e.c
index d1ddfa13de8..449a99605a8 100644
--- a/drivers/media/usb/dvb-usb/pctv452e.c
+++ b/drivers/media/usb/dvb-usb/pctv452e.c
@@ -828,7 +828,7 @@ static struct stb0899_config stb0899_config = {
 	.block_sync_mode = STB0899_SYNC_FORCED, /* ? */
 
 	.xtal_freq       = 27000000,	 /* Assume Hz ? */
-	.inversion       = IQ_SWAP_ON,       /* ? */
+	.inversion       = IQ_SWAP_ON,
 
 	.lo_clk	  = 76500000,
 	.hi_clk	  = 99000000,
-- 
cgit v1.2.3-70-g09d2


From 99119595d9ff06f74d97d3623fd8a63138f9b287 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <rdunlap@infradead.org>
Date: Mon, 20 May 2013 12:32:39 -0300
Subject: [media] media: fix hdpvr kconfig/build errors

Fix hdpvr build errors when CONFIG_I2C=m and VIDEO_V4L2=m and
VIDEO_HDPVR=y.
drivers/built-in.o: In function `hdpvr_disconnect':
hdpvr-core.c:(.text+0xef542): undefined reference to `v4l2_device_disconnect'
hdpvr-core.c:(.text+0xef57e): undefined reference to `i2c_del_adapter'
hdpvr-core.c:(.text+0xef58a): undefined reference to `video_unregister_device'
drivers/built-in.o: In function `hdpvr_delete':
(.text+0xef5b9): undefined reference to `video_device_release'
drivers/built-in.o: In function `hdpvr_probe':
hdpvr-core.c:(.text+0xef63a): undefined reference to `v4l2_device_register'
hdpvr-core.c:(.text+0xefd97): undefined reference to `i2c_del_adapter'
drivers/built-in.o: In function `hdpvr_s_ctrl':
hdpvr-video.c:(.text+0xf03c0): undefined reference to `v4l2_ctrl_activate'
drivers/built-in.o: In function `hdpvr_device_release':
hdpvr-video.c:(.text+0xf0470): undefined reference to `v4l2_device_unregister'
hdpvr-video.c:(.text+0xf0479): undefined reference to `v4l2_ctrl_handler_free'
hdpvr-video.c:(.text+0xf048f): undefined reference to `i2c_del_adapter'
drivers/built-in.o: In function `hdpvr_open':
hdpvr-video.c:(.text+0xf0570): undefined reference to `video_devdata'
hdpvr-video.c:(.text+0xf057b): undefined reference to `v4l2_fh_init'
hdpvr-video.c:(.text+0xf0583): undefined reference to `v4l2_fh_add'
drivers/built-in.o: In function `video_drvdata':
hdpvr-video.c:(.text+0xf08a0): undefined reference to `video_devdata'
drivers/built-in.o: In function `vidioc_s_dv_timings':
hdpvr-video.c:(.text+0xf0d34): undefined reference to `v4l_match_dv_timings'
drivers/built-in.o: In function `hdpvr_poll':
hdpvr-video.c:(.text+0xf1455): undefined reference to `v4l2_ctrl_poll'
drivers/built-in.o: In function `hdpvr_release':
hdpvr-video.c:(.text+0xf18f6): undefined reference to `v4l2_fh_release'
drivers/built-in.o: In function `hdpvr_register_videodev':
(.text+0xf1be3): undefined reference to `v4l2_ctrl_handler_init_class'
drivers/built-in.o: In function `hdpvr_register_videodev':
(.text+0xf1c19): undefined reference to `v4l2_ctrl_new_std'
drivers/built-in.o: In function `hdpvr_register_videodev':
(.text+0xf1c42): undefined reference to `v4l2_ctrl_new_std'
drivers/built-in.o: In function `hdpvr_register_videodev':
(.text+0xf1c6b): undefined reference to `v4l2_ctrl_new_std'
drivers/built-in.o: In function `hdpvr_register_videodev':
(.text+0xf1cac): undefined reference to `v4l2_ctrl_new_std'
drivers/built-in.o: In function `hdpvr_register_videodev':
(.text+0xf1cd5): undefined reference to `v4l2_ctrl_new_std'
drivers/built-in.o:(.text+0xf1cfe): more undefined references to `v4l2_ctrl_new_std' follow
drivers/built-in.o: In function `hdpvr_register_videodev':
(.text+0xf1d75): undefined reference to `v4l2_ctrl_new_std_menu'
drivers/built-in.o: In function `hdpvr_register_videodev':
(.text+0xf1d9e): undefined reference to `v4l2_ctrl_new_std_menu'
drivers/built-in.o: In function `hdpvr_register_videodev':
(.text+0xf1dc3): undefined reference to `v4l2_ctrl_new_std_menu'
drivers/built-in.o: In function `hdpvr_register_videodev':
(.text+0xf1de5): undefined reference to `v4l2_ctrl_new_std_menu'
drivers/built-in.o: In function `hdpvr_register_videodev':
(.text+0xf1e18): undefined reference to `v4l2_ctrl_new_std'
drivers/built-in.o: In function `hdpvr_register_videodev':
(.text+0xf1e4b): undefined reference to `v4l2_ctrl_new_std'
drivers/built-in.o: In function `hdpvr_register_videodev':
(.text+0xf1e90): undefined reference to `v4l2_ctrl_cluster'
drivers/built-in.o: In function `hdpvr_register_videodev':
(.text+0xf1e98): undefined reference to `v4l2_ctrl_handler_setup'
drivers/built-in.o: In function `hdpvr_register_videodev':
(.text+0xf1ec1): undefined reference to `video_device_alloc'
drivers/built-in.o: In function `hdpvr_register_videodev':
(.text+0xf1f85): undefined reference to `__video_register_device'
drivers/built-in.o: In function `hdpvr_register_videodev':
(.text+0xf1fac): undefined reference to `v4l2_ctrl_handler_free'
drivers/built-in.o: In function `hdpvr_register_ir_tx_i2c':
(.text+0xf238f): undefined reference to `i2c_new_device'
drivers/built-in.o: In function `hdpvr_register_ir_rx_i2c':
(.text+0xf2434): undefined reference to `i2c_new_device'
drivers/built-in.o: In function `hdpvr_register_i2c_adapter':
(.text+0xf2514): undefined reference to `i2c_add_adapter'
drivers/built-in.o:(.rodata+0x1b368): undefined reference to `video_ioctl2'
drivers/built-in.o:(.rodata+0x1b690): undefined reference to `v4l2_ctrl_log_status'
drivers/built-in.o:(.rodata+0x1b6f8): undefined reference to `v4l2_ctrl_subscribe_event'
drivers/built-in.o:(.rodata+0x1b700): undefined reference to `v4l2_event_unsubscribe'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/hdpvr/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/hdpvr/Kconfig b/drivers/media/usb/hdpvr/Kconfig
index de247f3c7d0..d73d9a1952b 100644
--- a/drivers/media/usb/hdpvr/Kconfig
+++ b/drivers/media/usb/hdpvr/Kconfig
@@ -1,7 +1,7 @@
 
 config VIDEO_HDPVR
 	tristate "Hauppauge HD PVR support"
-	depends on VIDEO_DEV
+	depends on VIDEO_DEV && VIDEO_V4L2
 	---help---
 	  This is a video4linux driver for Hauppauge's HD PVR USB device.
 
-- 
cgit v1.2.3-70-g09d2


From 4d601c4ca272959ba837b8279f4873b55caaf619 Mon Sep 17 00:00:00 2001
From: Leonid Kegulskiy <leo@lumanate.com>
Date: Mon, 13 May 2013 07:10:42 -0300
Subject: [media] hdpvr: Removed unnecessary use of kzalloc() in
 get_video_info()

[mchehab@redhat.com: CodingStyle fixes]
Signed-off-by: Leonid Kegulskiy <leo@lumanate.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/hdpvr/hdpvr-control.c | 25 ++++++---------
 drivers/media/usb/hdpvr/hdpvr-video.c   | 54 ++++++++++++++++-----------------
 drivers/media/usb/hdpvr/hdpvr.h         |  2 +-
 3 files changed, 37 insertions(+), 44 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/hdpvr/hdpvr-control.c b/drivers/media/usb/hdpvr/hdpvr-control.c
index ae8f229d114..df6bcb524d8 100644
--- a/drivers/media/usb/hdpvr/hdpvr-control.c
+++ b/drivers/media/usb/hdpvr/hdpvr-control.c
@@ -45,20 +45,10 @@ int hdpvr_config_call(struct hdpvr_device *dev, uint value, u8 valbuf)
 	return ret < 0 ? ret : 0;
 }
 
-struct hdpvr_video_info *get_video_info(struct hdpvr_device *dev)
+int get_video_info(struct hdpvr_device *dev, struct hdpvr_video_info *vidinf)
 {
-	struct hdpvr_video_info *vidinf = NULL;
-#ifdef HDPVR_DEBUG
-	char print_buf[15];
-#endif
 	int ret;
 
-	vidinf = kzalloc(sizeof(struct hdpvr_video_info), GFP_KERNEL);
-	if (!vidinf) {
-		v4l2_err(&dev->v4l2_dev, "out of memory\n");
-		goto err;
-	}
-
 	mutex_lock(&dev->usbc_mutex);
 	ret = usb_control_msg(dev->udev,
 			      usb_rcvctrlpipe(dev->udev, 0),
@@ -74,6 +64,7 @@ struct hdpvr_video_info *get_video_info(struct hdpvr_device *dev)
 
 #ifdef HDPVR_DEBUG
 	if (hdpvr_debug & MSG_INFO) {
+		char print_buf[15];
 		hex_dump_to_buffer(dev->usbc_buf, 5, 16, 1, print_buf,
 				   sizeof(print_buf), 0);
 		v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev,
@@ -82,12 +73,14 @@ struct hdpvr_video_info *get_video_info(struct hdpvr_device *dev)
 #endif
 	mutex_unlock(&dev->usbc_mutex);
 
-	if (!vidinf->width || !vidinf->height || !vidinf->fps) {
-		kfree(vidinf);
-		vidinf = NULL;
+	if ((ret > 0 && ret != 5) ||/* fail if unexpected byte count returned */
+	    !vidinf->width ||	/* preserve original behavior -  */
+	    !vidinf->height ||	/* fail if no signal is detected */
+	    !vidinf->fps) {
+		ret = -EFAULT;
 	}
-err:
-	return vidinf;
+
+	return ret < 0 ? ret : 0;
 }
 
 int get_input_lines_info(struct hdpvr_device *dev)
diff --git a/drivers/media/usb/hdpvr/hdpvr-video.c b/drivers/media/usb/hdpvr/hdpvr-video.c
index cd90ba81a5b..2d02b490756 100644
--- a/drivers/media/usb/hdpvr/hdpvr-video.c
+++ b/drivers/media/usb/hdpvr/hdpvr-video.c
@@ -277,20 +277,19 @@ error:
 static int hdpvr_start_streaming(struct hdpvr_device *dev)
 {
 	int ret;
-	struct hdpvr_video_info *vidinf;
+	struct hdpvr_video_info vidinf;
 
 	if (dev->status == STATUS_STREAMING)
 		return 0;
 	else if (dev->status != STATUS_IDLE)
 		return -EAGAIN;
 
-	vidinf = get_video_info(dev);
+	ret = get_video_info(dev, &vidinf);
 
-	if (vidinf) {
+	if (!ret) {
 		v4l2_dbg(MSG_BUFFER, hdpvr_debug, &dev->v4l2_dev,
-			 "video signal: %dx%d@%dhz\n", vidinf->width,
-			 vidinf->height, vidinf->fps);
-		kfree(vidinf);
+			 "video signal: %dx%d@%dhz\n", vidinf.width,
+			 vidinf.height, vidinf.fps);
 
 		/* start streaming 2 request */
 		ret = usb_control_msg(dev->udev,
@@ -610,21 +609,22 @@ static int vidioc_g_std(struct file *file, void *_fh,
 static int vidioc_querystd(struct file *file, void *_fh, v4l2_std_id *a)
 {
 	struct hdpvr_device *dev = video_drvdata(file);
-	struct hdpvr_video_info *vid_info;
+	struct hdpvr_video_info vid_info;
 	struct hdpvr_fh *fh = _fh;
+	int ret;
 
 	*a = V4L2_STD_ALL;
 	if (dev->options.video_input == HDPVR_COMPONENT)
 		return fh->legacy_mode ? 0 : -ENODATA;
-	vid_info = get_video_info(dev);
-	if (vid_info == NULL)
+	ret = get_video_info(dev, &vid_info);
+	if (ret)
 		return 0;
-	if (vid_info->width == 720 &&
-	    (vid_info->height == 480 || vid_info->height == 576)) {
-		*a = (vid_info->height == 480) ?
+	if (vid_info.width == 720 &&
+	    (vid_info.height == 480 || vid_info.height == 576)) {
+		*a = (vid_info.height == 480) ?
 			V4L2_STD_525_60 : V4L2_STD_625_50;
 	}
-	kfree(vid_info);
+
 	return 0;
 }
 
@@ -669,7 +669,7 @@ static int vidioc_query_dv_timings(struct file *file, void *_fh,
 {
 	struct hdpvr_device *dev = video_drvdata(file);
 	struct hdpvr_fh *fh = _fh;
-	struct hdpvr_video_info *vid_info;
+	struct hdpvr_video_info vid_info;
 	bool interlaced;
 	int ret = 0;
 	int i;
@@ -677,10 +677,10 @@ static int vidioc_query_dv_timings(struct file *file, void *_fh,
 	fh->legacy_mode = false;
 	if (dev->options.video_input)
 		return -ENODATA;
-	vid_info = get_video_info(dev);
-	if (vid_info == NULL)
+	ret = get_video_info(dev, &vid_info);
+	if (ret)
 		return -ENOLCK;
-	interlaced = vid_info->fps <= 30;
+	interlaced = vid_info.fps <= 30;
 	for (i = 0; i < ARRAY_SIZE(hdpvr_dv_timings); i++) {
 		const struct v4l2_bt_timings *bt = &hdpvr_dv_timings[i].bt;
 		unsigned hsize;
@@ -692,17 +692,17 @@ static int vidioc_query_dv_timings(struct file *file, void *_fh,
 			bt->il_vfrontporch + bt->il_vsync + bt->il_vbackporch +
 			bt->height;
 		fps = (unsigned)bt->pixelclock / (hsize * vsize);
-		if (bt->width != vid_info->width ||
-		    bt->height != vid_info->height ||
+		if (bt->width != vid_info.width ||
+		    bt->height != vid_info.height ||
 		    bt->interlaced != interlaced ||
-		    (fps != vid_info->fps && fps + 1 != vid_info->fps))
+		    (fps != vid_info.fps && fps + 1 != vid_info.fps))
 			continue;
 		*timings = hdpvr_dv_timings[i];
 		break;
 	}
 	if (i == ARRAY_SIZE(hdpvr_dv_timings))
 		ret = -ERANGE;
-	kfree(vid_info);
+
 	return ret;
 }
 
@@ -992,6 +992,7 @@ static int vidioc_g_fmt_vid_cap(struct file *file, void *_fh,
 {
 	struct hdpvr_device *dev = video_drvdata(file);
 	struct hdpvr_fh *fh = _fh;
+	int ret;
 
 	/*
 	 * The original driver would always returns the current detected
@@ -1004,14 +1005,13 @@ static int vidioc_g_fmt_vid_cap(struct file *file, void *_fh,
 	 * last set format.
 	 */
 	if (fh->legacy_mode) {
-		struct hdpvr_video_info *vid_info;
+		struct hdpvr_video_info vid_info;
 
-		vid_info = get_video_info(dev);
-		if (!vid_info)
+		ret = get_video_info(dev, &vid_info);
+		if (ret)
 			return -EFAULT;
-		f->fmt.pix.width = vid_info->width;
-		f->fmt.pix.height = vid_info->height;
-		kfree(vid_info);
+		f->fmt.pix.width = vid_info.width;
+		f->fmt.pix.height = vid_info.height;
 	} else {
 		f->fmt.pix.width = dev->width;
 		f->fmt.pix.height = dev->height;
diff --git a/drivers/media/usb/hdpvr/hdpvr.h b/drivers/media/usb/hdpvr/hdpvr.h
index 1478f3d5763..808ea7a0efe 100644
--- a/drivers/media/usb/hdpvr/hdpvr.h
+++ b/drivers/media/usb/hdpvr/hdpvr.h
@@ -303,7 +303,7 @@ int hdpvr_set_audio(struct hdpvr_device *dev, u8 input,
 int hdpvr_config_call(struct hdpvr_device *dev, uint value,
 		      unsigned char valbuf);
 
-struct hdpvr_video_info *get_video_info(struct hdpvr_device *dev);
+int get_video_info(struct hdpvr_device *dev, struct hdpvr_video_info *vid_info);
 
 /* :0 s b8 81 1800 0003 0003 3 < */
 /* :0 0 3 = 0301ff */
-- 
cgit v1.2.3-70-g09d2


From 625b35229bc491e837b385b7ce1e2a8eece3db0f Mon Sep 17 00:00:00 2001
From: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
Date: Tue, 14 May 2013 01:45:16 -0300
Subject: [media] media: usb: remove duplicate checks for EPERM in
 vidioc_g/s_register

This patch removes check for EPERM in vidioc_g/s_register
as this check is already performed by core.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/pvrusb2/pvrusb2-hdw.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
index e11267f35d8..01d1c2d47cb 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
@@ -5173,8 +5173,6 @@ int pvr2_hdw_register_access(struct pvr2_hdw *hdw,
 	int stat = 0;
 	int okFl = 0;
 
-	if (!capable(CAP_SYS_ADMIN)) return -EPERM;
-
 	req.match = *match;
 	req.reg = reg_id;
 	if (setFl) req.val = *val_ptr;
-- 
cgit v1.2.3-70-g09d2


From afcf44c786765b4eee44eea39ac0fddbbb830926 Mon Sep 17 00:00:00 2001
From: Kamal Mostafa <kamal@canonical.com>
Date: Mon, 15 Apr 2013 16:01:51 -0300
Subject: [media] uvcvideo: quirk PROBE_DEF for Dell Studio / OmniVision webcam

BugLink: https://bugs.launchpad.net/bugs/1168430
OminiVision webcam 0x05a9:0x264a (in Dell Studio Hybrid 140g) needs the
same UVC_QUIRK_PROBE_DEF as other OmniVision model to be recognized
consistently.

Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/uvc/uvc_driver.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
index 5dbefa68b1d..17bd48d16e5 100644
--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
@@ -2163,6 +2163,15 @@ static struct usb_device_id uvc_ids[] = {
 	  .bInterfaceSubClass	= 1,
 	  .bInterfaceProtocol	= 0,
 	  .driver_info 		= UVC_QUIRK_PROBE_DEF },
+	/* Dell Studio Hybrid 140g (OmniVision webcam) */
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
+				| USB_DEVICE_ID_MATCH_INT_INFO,
+	  .idVendor		= 0x05a9,
+	  .idProduct		= 0x264a,
+	  .bInterfaceClass	= USB_CLASS_VIDEO,
+	  .bInterfaceSubClass	= 1,
+	  .bInterfaceProtocol	= 0,
+	  .driver_info		= UVC_QUIRK_PROBE_DEF },
 	/* Apple Built-In iSight */
 	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_INT_INFO,
-- 
cgit v1.2.3-70-g09d2


From c2a273b24f2c82184cc0f04ba3a61da51c84724b Mon Sep 17 00:00:00 2001
From: Joseph Salisbury <joseph.salisbury@canonical.com>
Date: Wed, 15 May 2013 17:38:48 -0300
Subject: [media] uvcvideo: quirk PROBE_DEF for Alienware X51 OmniVision webcam

BugLink: http://bugs.launchpad.net/bugs/1180409
OminiVision webcam 0x05a9:0x2643 needs the same UVC_QUIRK_PROBE_DEF
as other OmniVision models to work properly.

Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/uvc/uvc_driver.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
index 17bd48d16e5..a7e64af5f82 100644
--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
@@ -2163,6 +2163,15 @@ static struct usb_device_id uvc_ids[] = {
 	  .bInterfaceSubClass	= 1,
 	  .bInterfaceProtocol	= 0,
 	  .driver_info 		= UVC_QUIRK_PROBE_DEF },
+	/* Dell Alienware X51 */
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
+				| USB_DEVICE_ID_MATCH_INT_INFO,
+	  .idVendor		= 0x05a9,
+	  .idProduct		= 0x2643,
+	  .bInterfaceClass	= USB_CLASS_VIDEO,
+	  .bInterfaceSubClass	= 1,
+	  .bInterfaceProtocol	= 0,
+	  .driver_info	= UVC_QUIRK_PROBE_DEF },
 	/* Dell Studio Hybrid 140g (OmniVision webcam) */
 	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_INT_INFO,
-- 
cgit v1.2.3-70-g09d2


From 17706f5653a90ff277b5b36c2eb60ff872df5e7a Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Thu, 25 Apr 2013 22:28:51 -0300
Subject: [media] uvcvideo: Fix open/close race condition

Maintaining the users count using an atomic variable makes sure that
access to the counter won't be racy, but doesn't serialize access to the
operations protected by the counter. This creates a race condition that
could result in the status URB being submitted multiple times.
Use a mutex to protect the users count and serialize access to the
status start and stop operations.

Reported-by: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/uvc/uvc_driver.c | 23 +++++++++++++++++------
 drivers/media/usb/uvc/uvc_status.c | 21 ++-------------------
 drivers/media/usb/uvc/uvc_v4l2.c   | 14 ++++++++++----
 drivers/media/usb/uvc/uvcvideo.h   |  7 +++----
 4 files changed, 32 insertions(+), 33 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
index a7e64af5f82..81695d48c13 100644
--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
@@ -1836,8 +1836,8 @@ static int uvc_probe(struct usb_interface *intf,
 	INIT_LIST_HEAD(&dev->chains);
 	INIT_LIST_HEAD(&dev->streams);
 	atomic_set(&dev->nstreams, 0);
-	atomic_set(&dev->users, 0);
 	atomic_set(&dev->nmappings, 0);
+	mutex_init(&dev->lock);
 
 	dev->udev = usb_get_dev(udev);
 	dev->intf = usb_get_intf(intf);
@@ -1950,8 +1950,13 @@ static int uvc_suspend(struct usb_interface *intf, pm_message_t message)
 
 	/* Controls are cached on the fly so they don't need to be saved. */
 	if (intf->cur_altsetting->desc.bInterfaceSubClass ==
-	    UVC_SC_VIDEOCONTROL)
-		return uvc_status_suspend(dev);
+	    UVC_SC_VIDEOCONTROL) {
+		mutex_lock(&dev->lock);
+		if (dev->users)
+			uvc_status_stop(dev);
+		mutex_unlock(&dev->lock);
+		return 0;
+	}
 
 	list_for_each_entry(stream, &dev->streams, list) {
 		if (stream->intf == intf)
@@ -1973,14 +1978,20 @@ static int __uvc_resume(struct usb_interface *intf, int reset)
 
 	if (intf->cur_altsetting->desc.bInterfaceSubClass ==
 	    UVC_SC_VIDEOCONTROL) {
-		if (reset) {
-			int ret = uvc_ctrl_resume_device(dev);
+		int ret = 0;
 
+		if (reset) {
+			ret = uvc_ctrl_resume_device(dev);
 			if (ret < 0)
 				return ret;
 		}
 
-		return uvc_status_resume(dev);
+		mutex_lock(&dev->lock);
+		if (dev->users)
+			ret = uvc_status_start(dev, GFP_NOIO);
+		mutex_unlock(&dev->lock);
+
+		return ret;
 	}
 
 	list_for_each_entry(stream, &dev->streams, list) {
diff --git a/drivers/media/usb/uvc/uvc_status.c b/drivers/media/usb/uvc/uvc_status.c
index b7492775e6a..f552ab99795 100644
--- a/drivers/media/usb/uvc/uvc_status.c
+++ b/drivers/media/usb/uvc/uvc_status.c
@@ -206,32 +206,15 @@ void uvc_status_cleanup(struct uvc_device *dev)
 	uvc_input_cleanup(dev);
 }
 
-int uvc_status_start(struct uvc_device *dev)
+int uvc_status_start(struct uvc_device *dev, gfp_t flags)
 {
 	if (dev->int_urb == NULL)
 		return 0;
 
-	return usb_submit_urb(dev->int_urb, GFP_KERNEL);
+	return usb_submit_urb(dev->int_urb, flags);
 }
 
 void uvc_status_stop(struct uvc_device *dev)
 {
 	usb_kill_urb(dev->int_urb);
 }
-
-int uvc_status_suspend(struct uvc_device *dev)
-{
-	if (atomic_read(&dev->users))
-		usb_kill_urb(dev->int_urb);
-
-	return 0;
-}
-
-int uvc_status_resume(struct uvc_device *dev)
-{
-	if (dev->int_urb == NULL || atomic_read(&dev->users) == 0)
-		return 0;
-
-	return usb_submit_urb(dev->int_urb, GFP_NOIO);
-}
-
diff --git a/drivers/media/usb/uvc/uvc_v4l2.c b/drivers/media/usb/uvc/uvc_v4l2.c
index b2dc32623a7..3afff92804d 100644
--- a/drivers/media/usb/uvc/uvc_v4l2.c
+++ b/drivers/media/usb/uvc/uvc_v4l2.c
@@ -498,16 +498,20 @@ static int uvc_v4l2_open(struct file *file)
 		return -ENOMEM;
 	}
 
-	if (atomic_inc_return(&stream->dev->users) == 1) {
-		ret = uvc_status_start(stream->dev);
+	mutex_lock(&stream->dev->lock);
+	if (stream->dev->users == 0) {
+		ret = uvc_status_start(stream->dev, GFP_KERNEL);
 		if (ret < 0) {
-			atomic_dec(&stream->dev->users);
+			mutex_unlock(&stream->dev->lock);
 			usb_autopm_put_interface(stream->dev->intf);
 			kfree(handle);
 			return ret;
 		}
 	}
 
+	stream->dev->users++;
+	mutex_unlock(&stream->dev->lock);
+
 	v4l2_fh_init(&handle->vfh, stream->vdev);
 	v4l2_fh_add(&handle->vfh);
 	handle->chain = stream->chain;
@@ -538,8 +542,10 @@ static int uvc_v4l2_release(struct file *file)
 	kfree(handle);
 	file->private_data = NULL;
 
-	if (atomic_dec_return(&stream->dev->users) == 0)
+	mutex_lock(&stream->dev->lock);
+	if (--stream->dev->users == 0)
 		uvc_status_stop(stream->dev);
+	mutex_unlock(&stream->dev->lock);
 
 	usb_autopm_put_interface(stream->dev->intf);
 	return 0;
diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
index af505fdd9b3..9e35982d099 100644
--- a/drivers/media/usb/uvc/uvcvideo.h
+++ b/drivers/media/usb/uvc/uvcvideo.h
@@ -514,7 +514,8 @@ struct uvc_device {
 	char name[32];
 
 	enum uvc_device_state state;
-	atomic_t users;
+	struct mutex lock;		/* Protects users */
+	unsigned int users;
 	atomic_t nmappings;
 
 	/* Video control interface */
@@ -660,10 +661,8 @@ void uvc_video_clock_update(struct uvc_streaming *stream,
 /* Status */
 extern int uvc_status_init(struct uvc_device *dev);
 extern void uvc_status_cleanup(struct uvc_device *dev);
-extern int uvc_status_start(struct uvc_device *dev);
+extern int uvc_status_start(struct uvc_device *dev, gfp_t flags);
 extern void uvc_status_stop(struct uvc_device *dev);
-extern int uvc_status_suspend(struct uvc_device *dev);
-extern int uvc_status_resume(struct uvc_device *dev);
 
 /* Controls */
 extern const struct v4l2_subscribed_event_ops uvc_ctrl_sub_ev_ops;
-- 
cgit v1.2.3-70-g09d2


From a7fab8511169bd28ba0a00501afd12fc8a1a2c61 Mon Sep 17 00:00:00 2001
From: Alessandro Miceli <angelofsky1980@gmail.com>
Date: Fri, 3 May 2013 15:58:21 -0300
Subject: [media] Add support for 'Digital Dual TV Receiver CTVDIGDUAL v2

Tested on a MIPSel box with 3.3.6 kernel
The kernel output when the device will be detected follows:
usbcore: registered new interface driver dvb_usb_it913x
it913x: Chip Version=01 Chip Type=9135
it913x: Remote propriety (raw) mode
it913x: Dual mode=3 Tuner Type=38
it913x: Chip Version=01 Chip Type=9135
usb 2-1: dvb_usb_v2: found a 'Digital Dual TV Receiver CTVDIGDUAL_V2' in cold state
usb 2-1: dvb_usb_v2: downloading firmware from file 'dvb-usb-it9137-01.fw'
it913x: FRM Starting Firmware Download
it913x: FRM Firmware Download Completed - Resetting Device
it913x: Chip Version=01 Chip Type=9135
it913x: Firmware Version 204147968
usb 2-1: dvb_usb_v2: found a 'Digital Dual TV Receiver CTVDIGDUAL_V2' in warm state
usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (Digital Dual TV Receiver CTVDIGDUAL_V2)
it913x-fe: ADF table value      :00
it913x-fe: Crystal Frequency :12000000 Adc Frequency :20250000 ADC X2: 00
it913x-fe: Tuner LNA type :38
usb 2-1: DVB: registering adapter 1 frontend 0 (Digital Dual TV Receiver CTVDIGDUAL_V2_1)...
usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (Digital Dual TV Receiver CTVDIGDUAL_V2)
it913x-fe: ADF table value      :00
it913x-fe: Crystal Frequency :12000000 Adc Frequency :20250000 ADC X2: 00
it913x-fe: Tuner LNA type :38
usb 2-1: DVB: registering adapter 2 frontend 0 (Digital Dual TV Receiver CTVDIGDUAL_V2_2)...
usb 2-1: dvb_usb_v2: 'Digital Dual TV Receiver CTVDIGDUAL_V2' successfully initialized and connected
RC part not tested

Signed-off-by: Alessandro Miceli <angelofsky1980@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb-core/dvb-usb-ids.h  | 1 +
 drivers/media/usb/dvb-usb-v2/it913x.c | 5 ++++-
 2 files changed, 5 insertions(+), 1 deletion(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/dvb-core/dvb-usb-ids.h b/drivers/media/dvb-core/dvb-usb-ids.h
index 335a8f4695b..2e0709a66f8 100644
--- a/drivers/media/dvb-core/dvb-usb-ids.h
+++ b/drivers/media/dvb-core/dvb-usb-ids.h
@@ -367,4 +367,5 @@
 #define USB_PID_TECHNISAT_USB2_HDCI_V2			0x0002
 #define USB_PID_TECHNISAT_AIRSTAR_TELESTICK_2		0x0004
 #define USB_PID_TECHNISAT_USB2_DVB_S2			0x0500
+#define USB_PID_CTVDIGDUAL_V2				0xe410
 #endif
diff --git a/drivers/media/usb/dvb-usb-v2/it913x.c b/drivers/media/usb/dvb-usb-v2/it913x.c
index e48cdeb9df4..1cb6899cf79 100644
--- a/drivers/media/usb/dvb-usb-v2/it913x.c
+++ b/drivers/media/usb/dvb-usb-v2/it913x.c
@@ -45,7 +45,7 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able)).");
 
 static int dvb_usb_it913x_firmware;
 module_param_named(firmware, dvb_usb_it913x_firmware, int, 0644);
-MODULE_PARM_DESC(firmware, "set firmware 0=auto"\
+MODULE_PARM_DESC(firmware, "set firmware 0=auto "\
 	"1=IT9137 2=IT9135 V1 3=IT9135 V2");
 #define FW_IT9137 "dvb-usb-it9137-01.fw"
 #define FW_IT9135_V1 "dvb-usb-it9135-01.fw"
@@ -796,6 +796,9 @@ static const struct usb_device_id it913x_id_table[] = {
 	{ DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A835B_4835,
 		&it913x_properties, "Avermedia A835B(4835)",
 			RC_MAP_IT913X_V2) },
+	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_CTVDIGDUAL_V2,
+		&it913x_properties, "Digital Dual TV Receiver CTVDIGDUAL_V2",
+			RC_MAP_IT913X_V1) },
 	{}		/* Terminating entry */
 };
 
-- 
cgit v1.2.3-70-g09d2


From 3b98c347838d0a62476ea4c55daf5c315f56cbbb Mon Sep 17 00:00:00 2001
From: Antti Palosaari <crope@iki.fi>
Date: Mon, 11 Mar 2013 19:05:39 -0300
Subject: [media] af9035: implement I2C adapter read operation

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/dvb-usb-v2/af9035.c | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c
index b638fc1cd57..cfcf79b5978 100644
--- a/drivers/media/usb/dvb-usb-v2/af9035.c
+++ b/drivers/media/usb/dvb-usb-v2/af9035.c
@@ -268,11 +268,29 @@ static int af9035_i2c_master_xfer(struct i2c_adapter *adap,
 			memcpy(&buf[5], msg[0].buf, msg[0].len);
 			ret = af9035_ctrl_msg(d, &req);
 		}
+	} else if (num == 1 && (msg[0].flags & I2C_M_RD)) {
+		if (msg[0].len > 40) {
+			/* TODO: correct limits > 40 */
+			ret = -EOPNOTSUPP;
+		} else {
+			/* I2C */
+			u8 buf[5];
+			struct usb_req req = { CMD_I2C_RD, 0, sizeof(buf),
+					buf, msg[0].len, msg[0].buf };
+			req.mbox |= ((msg[0].addr & 0x80)  >>  3);
+			buf[0] = msg[0].len;
+			buf[1] = msg[0].addr << 1;
+			buf[2] = 0x00; /* reg addr len */
+			buf[3] = 0x00; /* reg addr MSB */
+			buf[4] = 0x00; /* reg addr LSB */
+			ret = af9035_ctrl_msg(d, &req);
+		}
 	} else {
 		/*
-		 * We support only two kind of I2C transactions:
-		 * 1) 1 x read + 1 x write
+		 * We support only three kind of I2C transactions:
+		 * 1) 1 x read + 1 x write (repeated start)
 		 * 2) 1 x write
+		 * 3) 1 x read
 		 */
 		ret = -EOPNOTSUPP;
 	}
-- 
cgit v1.2.3-70-g09d2


From cb9114e9633c2afd029ac88ed73eb2a0b8f14edf Mon Sep 17 00:00:00 2001
From: Antti Palosaari <crope@iki.fi>
Date: Mon, 3 Jun 2013 18:42:14 -0300
Subject: [media] af9035: make checkpatch.pl happy!

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/dvb-usb-v2/af9035.c | 24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c
index cfcf79b5978..7d3b3c210e5 100644
--- a/drivers/media/usb/dvb-usb-v2/af9035.c
+++ b/drivers/media/usb/dvb-usb-v2/af9035.c
@@ -91,9 +91,10 @@ static int af9035_ctrl_msg(struct dvb_usb_device *d, struct usb_req *req)
 	checksum = af9035_checksum(state->buf, rlen - 2);
 	tmp_checksum = (state->buf[rlen - 2] << 8) | state->buf[rlen - 1];
 	if (tmp_checksum != checksum) {
-		dev_err(&d->udev->dev, "%s: command=%02x checksum mismatch " \
-				"(%04x != %04x)\n", KBUILD_MODNAME, req->cmd,
-				tmp_checksum, checksum);
+		dev_err(&d->udev->dev,
+				"%s: command=%02x checksum mismatch (%04x != %04x)\n",
+				KBUILD_MODNAME, req->cmd, tmp_checksum,
+				checksum);
 		ret = -EIO;
 		goto exit;
 	}
@@ -400,9 +401,10 @@ static int af9035_download_firmware_old(struct dvb_usb_device *d,
 		hdr_checksum = fw->data[fw->size - i + 5] << 8;
 		hdr_checksum |= fw->data[fw->size - i + 6] << 0;
 
-		dev_dbg(&d->udev->dev, "%s: core=%d addr=%04x data_len=%d " \
-				"checksum=%04x\n", __func__, hdr_core, hdr_addr,
-				hdr_data_len, hdr_checksum);
+		dev_dbg(&d->udev->dev,
+				"%s: core=%d addr=%04x data_len=%d checksum=%04x\n",
+				__func__, hdr_core, hdr_addr, hdr_data_len,
+				hdr_checksum);
 
 		if (((hdr_core != 1) && (hdr_core != 2)) ||
 				(hdr_data_len > i)) {
@@ -507,7 +509,7 @@ static int af9035_download_firmware(struct dvb_usb_device *d,
 	u8 rbuf[4];
 	u8 tmp;
 	struct usb_req req = { 0, 0, 0, NULL, 0, NULL };
-	struct usb_req req_fw_ver = { CMD_FW_QUERYINFO, 0, 1, wbuf, 4, rbuf } ;
+	struct usb_req req_fw_ver = { CMD_FW_QUERYINFO, 0, 1, wbuf, 4, rbuf };
 	dev_dbg(&d->udev->dev, "%s:\n", __func__);
 
 	/*
@@ -1218,9 +1220,9 @@ static int af9035_init(struct dvb_usb_device *d)
 		{ 0x80f9a4, 0x00, 0x01 },
 	};
 
-	dev_dbg(&d->udev->dev, "%s: USB speed=%d frame_size=%04x " \
-			"packet_size=%02x\n", __func__,
-			d->udev->speed, frame_size, packet_size);
+	dev_dbg(&d->udev->dev,
+			"%s: USB speed=%d frame_size=%04x packet_size=%02x\n",
+			__func__, d->udev->speed, frame_size, packet_size);
 
 	/* init endpoints */
 	for (i = 0; i < ARRAY_SIZE(tab); i++) {
@@ -1495,7 +1497,7 @@ static const struct usb_device_id af9035_id_table[] = {
 		&af9035_props, "AVerMedia Twinstar (A825)", NULL) },
 	{ DVB_USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3100MINI_PLUS,
 		&af9035_props, "Asus U3100Mini Plus", NULL) },
-        { DVB_USB_DEVICE(USB_VID_TERRATEC, 0x00aa,
+	{ DVB_USB_DEVICE(USB_VID_TERRATEC, 0x00aa,
 		&af9035_props, "TerraTec Cinergy T Stick (rev. 2)", NULL) },
 	/* IT9135 devices */
 #if 0
-- 
cgit v1.2.3-70-g09d2


From e8292e28e3543fec62406551a026fcc0f2ca3cff Mon Sep 17 00:00:00 2001
From: Antti Palosaari <crope@iki.fi>
Date: Mon, 3 Jun 2013 18:50:43 -0300
Subject: [media] af9035: minor log writing changes

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/dvb-usb-v2/af9035.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c
index 7d3b3c210e5..e855ee6c86b 100644
--- a/drivers/media/usb/dvb-usb-v2/af9035.c
+++ b/drivers/media/usb/dvb-usb-v2/af9035.c
@@ -55,7 +55,7 @@ static int af9035_ctrl_msg(struct dvb_usb_device *d, struct usb_req *req)
 	if (req->wlen > (BUF_LEN - REQ_HDR_LEN - CHECKSUM_LEN) ||
 			req->rlen > (BUF_LEN - ACK_HDR_LEN - CHECKSUM_LEN)) {
 		dev_err(&d->udev->dev, "%s: too much data wlen=%d rlen=%d\n",
-				__func__, req->wlen, req->rlen);
+				KBUILD_MODNAME, req->wlen, req->rlen);
 		ret = -EINVAL;
 		goto exit;
 	}
@@ -336,8 +336,8 @@ static int af9035_identify_state(struct dvb_usb_device *d, const char **name)
 
 	dev_info(&d->udev->dev,
 			"%s: prechip_version=%02x chip_version=%02x chip_type=%04x\n",
-			__func__, state->prechip_version, state->chip_version,
-			state->chip_type);
+			KBUILD_MODNAME, state->prechip_version,
+			state->chip_version, state->chip_type);
 
 	if (state->chip_type == 0x9135) {
 		if (state->chip_version == 0x02)
-- 
cgit v1.2.3-70-g09d2


From d716ef46fbb9de22de09516ecff990fe4e7799e3 Mon Sep 17 00:00:00 2001
From: Antti Palosaari <crope@iki.fi>
Date: Mon, 3 Jun 2013 19:39:51 -0300
Subject: [media] af9035: correct TS mode handling

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/dvb-usb-v2/af9035.c | 14 ++++++++------
 drivers/media/usb/dvb-usb-v2/af9035.h | 11 ++++++++---
 2 files changed, 16 insertions(+), 9 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c
index e855ee6c86b..1ea17dc2a76 100644
--- a/drivers/media/usb/dvb-usb-v2/af9035.c
+++ b/drivers/media/usb/dvb-usb-v2/af9035.c
@@ -518,11 +518,11 @@ static int af9035_download_firmware(struct dvb_usb_device *d,
 	 * which is done by master demod.
 	 * Master feeds also clock and controls power via GPIO.
 	 */
-	ret = af9035_rd_reg(d, state->eeprom_addr + EEPROM_DUAL_MODE, &tmp);
+	ret = af9035_rd_reg(d, state->eeprom_addr + EEPROM_TS_MODE, &tmp);
 	if (ret < 0)
 		goto err;
 
-	if (tmp) {
+	if (tmp == 1 || tmp == 3) {
 		/* configure gpioh1, reset & power slave demod */
 		ret = af9035_wr_reg_mask(d, 0x00d8b0, 0x01, 0x01);
 		if (ret < 0)
@@ -640,13 +640,15 @@ static int af9035_read_config(struct dvb_usb_device *d)
 	}
 
 	/* check if there is dual tuners */
-	ret = af9035_rd_reg(d, state->eeprom_addr + EEPROM_DUAL_MODE, &tmp);
+	ret = af9035_rd_reg(d, state->eeprom_addr + EEPROM_TS_MODE, &tmp);
 	if (ret < 0)
 		goto err;
 
-	state->dual_mode = tmp;
-	dev_dbg(&d->udev->dev, "%s: dual mode=%d\n", __func__,
-			state->dual_mode);
+	if (tmp == 1 || tmp == 3)
+		state->dual_mode = true;
+
+	dev_dbg(&d->udev->dev, "%s: ts mode=%d dual mode=%d\n", __func__,
+			tmp, state->dual_mode);
 
 	if (state->dual_mode) {
 		/* read 2nd demodulator I2C address */
diff --git a/drivers/media/usb/dvb-usb-v2/af9035.h b/drivers/media/usb/dvb-usb-v2/af9035.h
index b5827ca3a01..a1c68d829b8 100644
--- a/drivers/media/usb/dvb-usb-v2/af9035.h
+++ b/drivers/media/usb/dvb-usb-v2/af9035.h
@@ -100,8 +100,13 @@ static const u32 clock_lut_it9135[] = {
  * eeprom is memory mapped as read only. Writing that memory mapped address
  * will not corrupt eeprom.
  *
- * eeprom has value 0x00 single mode and 0x03 for dual mode as far as I have
- * seen to this day.
+ * TS mode:
+ * 0  TS
+ * 1  DCA + PIP
+ * 3  PIP
+ * n  DCA
+ *
+ * Values 0 and 3 are seen to this day. 0 for single TS and 3 for dual TS.
  */
 
 #define EEPROM_BASE_AF9035        0x42fd
@@ -109,7 +114,7 @@ static const u32 clock_lut_it9135[] = {
 #define EEPROM_SHIFT                0x10
 
 #define EEPROM_IR_MODE              0x10
-#define EEPROM_DUAL_MODE            0x29
+#define EEPROM_TS_MODE              0x29
 #define EEPROM_2ND_DEMOD_ADDR       0x2a
 #define EEPROM_IR_TYPE              0x2c
 #define EEPROM_1_IF_L               0x30
-- 
cgit v1.2.3-70-g09d2


From 1e41413f9869c4a688b2f937ff50584bd62eeb31 Mon Sep 17 00:00:00 2001
From: Rodrigo Tartajo <rtarty@gmail.com>
Date: Sat, 20 Apr 2013 20:02:12 -0300
Subject: [media] rtl2832u: restore ir remote control support

Hi,
This patch uses the driver from openpli[1] as a template to restore the remote control support.
I had to divert from the original to use the in kernel rc protocol decoder. The key repetition does,
not seem to work but I cant find the problem in the driver. As a raw rc provider, no key table is
hardcoded.
Rodrigo.
[1]: https://aur.archlinux.org/packages/dvb-usb-rtl2832u-openpli/?comments=all

Signed-off-by: Rodrigo Tartajo <rtarty@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/dvb-usb-v2/dvb_usb.h  |  2 +-
 drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 83 ++++++++++++++++++++++++++++-----
 drivers/media/usb/dvb-usb-v2/rtl28xxu.h | 11 +++++
 3 files changed, 83 insertions(+), 13 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/dvb-usb-v2/dvb_usb.h b/drivers/media/usb/dvb-usb-v2/dvb_usb.h
index 658c6d47fdf..399916bd588 100644
--- a/drivers/media/usb/dvb-usb-v2/dvb_usb.h
+++ b/drivers/media/usb/dvb-usb-v2/dvb_usb.h
@@ -140,7 +140,7 @@ struct dvb_usb_rc {
 	int (*change_protocol)(struct rc_dev *dev, u64 *rc_type);
 	int (*query) (struct dvb_usb_device *d);
 	unsigned int interval;
-	const enum rc_driver_type driver_type;
+	enum rc_driver_type driver_type;
 	bool bulk_mode;
 };
 
diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
index 22015fe1a0f..e592662ccc0 100644
--- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
+++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
@@ -1249,11 +1249,21 @@ static int rtl2831u_get_rc_config(struct dvb_usb_device *d,
 #if IS_ENABLED(CONFIG_RC_CORE)
 static int rtl2832u_rc_query(struct dvb_usb_device *d)
 {
+#define TICSAT38KHZTONS(x) ((x) * (1000000000/38000))
 	int ret, i;
 	struct rtl28xxu_priv *priv = d->priv;
 	u8 buf[128];
 	int len;
-	struct rtl28xxu_reg_val rc_nec_tab[] = {
+	struct ir_raw_event ev; //encode single ir event (pulse or space)
+	struct rtl28xxu_xreg_val rc_sys_init_tab[] = {
+		{ SYS_DEMOD_CTL1,   OP_AND, 0xfb },
+		{ SYS_DEMOD_CTL1,   OP_AND, 0xf7 },
+		{ USB_CTRL,         OP_OR , 0x20 },
+		{ SYS_SYS1,         OP_AND, 0xf7 },
+		{ SYS_GPIO_OUT_EN,  OP_OR , 0x08 },
+		{ SYS_GPIO_OUT_VAL, OP_OR , 0x08 },
+	}; // system hard init
+	struct rtl28xxu_reg_val rc_init_tab[] = {
 		{ IR_RX_CTRL,             0x20 },
 		{ IR_RX_BUF_CTRL,         0x80 },
 		{ IR_RX_IF,               0xff },
@@ -1268,13 +1278,40 @@ static int rtl2832u_rc_query(struct dvb_usb_device *d)
 		{ IR_MAX_H_TOL_LEN,       0x1e },
 		{ IR_MAX_L_TOL_LEN,       0x1e },
 		{ IR_RX_CTRL,             0x80 },
-	};
+	}; // hard init
+	struct rtl28xxu_reg_val rc_reinit_tab[] = {
+		{ IR_RX_CTRL,     0x20 },
+		{ IR_RX_BUF_CTRL, 0x80 },
+		{ IR_RX_IF,       0xff },
+		{ IR_RX_IE,       0xff },
+		{ IR_RX_CTRL,     0x80 },
+	}; // reinit IR
+	struct rtl28xxu_reg_val rc_clear_tab[] = {
+		{ IR_RX_IF,       0x03 },
+		{ IR_RX_BUF_CTRL, 0x80 },
+		{ IR_RX_CTRL,     0x80 },
+	}; // clear reception
 
 	/* init remote controller */
 	if (!priv->rc_active) {
-		for (i = 0; i < ARRAY_SIZE(rc_nec_tab); i++) {
-			ret = rtl28xx_wr_reg(d, rc_nec_tab[i].reg,
-					rc_nec_tab[i].val);
+		for (i = 0; i < ARRAY_SIZE(rc_sys_init_tab); i++) {
+			ret = rtl28xx_rd_reg(d, rc_sys_init_tab[i].reg, &buf[0]);
+			if (ret)
+				goto err;
+			if (rc_sys_init_tab[i].op == OP_AND) {
+				buf[0] &= rc_sys_init_tab[i].mask;
+			}
+			else {//OP_OR
+				buf[0] |= rc_sys_init_tab[i].mask;
+			}
+			ret = rtl28xx_wr_reg(d, rc_sys_init_tab[i].reg,
+					buf[0]);
+			if (ret)
+				goto err;
+		}
+		for (i = 0; i < ARRAY_SIZE(rc_init_tab); i++) {
+			ret = rtl28xx_wr_reg(d, rc_init_tab[i].reg,
+					rc_init_tab[i].val);
 			if (ret)
 				goto err;
 		}
@@ -1286,7 +1323,7 @@ static int rtl2832u_rc_query(struct dvb_usb_device *d)
 		goto err;
 
 	if (buf[0] != 0x83)
-		goto exit;
+		goto err;
 
 	ret = rtl28xx_rd_reg(d, IR_RX_BC, &buf[0]);
 	if (ret)
@@ -1295,26 +1332,48 @@ static int rtl2832u_rc_query(struct dvb_usb_device *d)
 	len = buf[0];
 	ret = rtl2831_rd_regs(d, IR_RX_BUF, buf, len);
 
-	/* TODO: pass raw IR to Kernel IR decoder */
+	/* pass raw IR to Kernel IR decoder */
+	init_ir_raw_event(&ev);
+	ir_raw_event_reset(d->rc_dev);
+	ev.pulse=1;
+	for(i=0; true; ++i) { // conver count to time
+		if (i >= len || !(buf[i] & 0x80) != !(ev.pulse)) {//end or transition pulse/space: flush
+			ir_raw_event_store(d->rc_dev, &ev);
+			ev.duration = 0;
+		}
+		if (i >= len)
+			break;
+		ev.pulse = buf[i] >> 7;
+		ev.duration += TICSAT38KHZTONS(((u32)(buf[i] & 0x7F)) << 1);
+	}
+	ir_raw_event_handle(d->rc_dev);
 
-	ret = rtl28xx_wr_reg(d, IR_RX_IF, 0x03);
-	ret = rtl28xx_wr_reg(d, IR_RX_BUF_CTRL, 0x80);
-	ret = rtl28xx_wr_reg(d, IR_RX_CTRL, 0x80);
+	for (i = 0; i < ARRAY_SIZE(rc_clear_tab); i++) {
+		ret = rtl28xx_wr_reg(d, rc_clear_tab[i].reg,
+				rc_clear_tab[i].val);
+		if (ret)
+			goto err;
+	}
 
-exit:
 	return ret;
 err:
+	for (i = 0; i < ARRAY_SIZE(rc_reinit_tab); i++) {
+		ret = rtl28xx_wr_reg(d, rc_reinit_tab[i].reg,
+				rc_reinit_tab[i].val);
+	}
 	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
 	return ret;
+#undef TICSAT38KHZTONS
 }
 
 static int rtl2832u_get_rc_config(struct dvb_usb_device *d,
 		struct dvb_usb_rc *rc)
 {
 	rc->map_name = RC_MAP_EMPTY;
-	rc->allowed_protos = RC_BIT_NEC;
+	rc->allowed_protos = RC_BIT_ALL;
 	rc->query = rtl2832u_rc_query;
 	rc->interval = 400;
+	rc->driver_type = RC_DRIVER_IR_RAW;
 
 	return 0;
 }
diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.h b/drivers/media/usb/dvb-usb-v2/rtl28xxu.h
index 533a3312728..0177b3871ba 100644
--- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.h
+++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.h
@@ -97,6 +97,17 @@ struct rtl28xxu_reg_val {
 	u8 val;
 };
 
+enum OP{
+	OP_AND	=0,
+	OP_OR
+};
+
+struct rtl28xxu_xreg_val {
+	u16 reg;
+	u8 op;
+	u8 mask;
+};
+
 /*
  * memory map
  *
-- 
cgit v1.2.3-70-g09d2


From f39fac3e409322d23261e89374a7d9daecfd6acb Mon Sep 17 00:00:00 2001
From: Antti Palosaari <crope@iki.fi>
Date: Tue, 4 Jun 2013 09:17:03 -0300
Subject: [media] rtl28xxu: reimplement rtl2832u remote controller

Thanks to Rodrigo for original implementation!

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 152 ++++++++++++--------------------
 drivers/media/usb/dvb-usb-v2/rtl28xxu.h |   9 +-
 2 files changed, 58 insertions(+), 103 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
index e592662ccc0..41670116743 100644
--- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
+++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
@@ -1114,17 +1114,6 @@ static int rtl2832u_power_ctrl(struct dvb_usb_device *d, int onoff)
 		if (ret)
 			goto err;
 	} else {
-		/* demod_ctl_1 */
-		ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL1, &val);
-		if (ret)
-			goto err;
-
-		val |= 0x0c;
-
-		ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL1, val);
-		if (ret)
-			goto err;
-
 		/* set output values */
 		ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &val);
 		if (ret)
@@ -1249,72 +1238,44 @@ static int rtl2831u_get_rc_config(struct dvb_usb_device *d,
 #if IS_ENABLED(CONFIG_RC_CORE)
 static int rtl2832u_rc_query(struct dvb_usb_device *d)
 {
-#define TICSAT38KHZTONS(x) ((x) * (1000000000/38000))
-	int ret, i;
+	int ret, i, len;
 	struct rtl28xxu_priv *priv = d->priv;
+	struct ir_raw_event ev;
 	u8 buf[128];
-	int len;
-	struct ir_raw_event ev; //encode single ir event (pulse or space)
-	struct rtl28xxu_xreg_val rc_sys_init_tab[] = {
-		{ SYS_DEMOD_CTL1,   OP_AND, 0xfb },
-		{ SYS_DEMOD_CTL1,   OP_AND, 0xf7 },
-		{ USB_CTRL,         OP_OR , 0x20 },
-		{ SYS_SYS1,         OP_AND, 0xf7 },
-		{ SYS_GPIO_OUT_EN,  OP_OR , 0x08 },
-		{ SYS_GPIO_OUT_VAL, OP_OR , 0x08 },
-	}; // system hard init
-	struct rtl28xxu_reg_val rc_init_tab[] = {
-		{ IR_RX_CTRL,             0x20 },
-		{ IR_RX_BUF_CTRL,         0x80 },
-		{ IR_RX_IF,               0xff },
-		{ IR_RX_IE,               0xff },
-		{ IR_MAX_DURATION0,       0xd0 },
-		{ IR_MAX_DURATION1,       0x07 },
-		{ IR_IDLE_LEN0,           0xc0 },
-		{ IR_IDLE_LEN1,           0x00 },
-		{ IR_GLITCH_LEN,          0x03 },
-		{ IR_RX_CLK,              0x09 },
-		{ IR_RX_CFG,              0x1c },
-		{ IR_MAX_H_TOL_LEN,       0x1e },
-		{ IR_MAX_L_TOL_LEN,       0x1e },
-		{ IR_RX_CTRL,             0x80 },
-	}; // hard init
-	struct rtl28xxu_reg_val rc_reinit_tab[] = {
-		{ IR_RX_CTRL,     0x20 },
-		{ IR_RX_BUF_CTRL, 0x80 },
-		{ IR_RX_IF,       0xff },
-		{ IR_RX_IE,       0xff },
-		{ IR_RX_CTRL,     0x80 },
-	}; // reinit IR
-	struct rtl28xxu_reg_val rc_clear_tab[] = {
-		{ IR_RX_IF,       0x03 },
-		{ IR_RX_BUF_CTRL, 0x80 },
-		{ IR_RX_CTRL,     0x80 },
-	}; // clear reception
+	static const struct rtl28xxu_reg_val_mask refresh_tab[] = {
+		{IR_RX_IF,               0x03, 0xff},
+		{IR_RX_BUF_CTRL,         0x80, 0xff},
+		{IR_RX_CTRL,             0x80, 0xff},
+	};
 
 	/* init remote controller */
 	if (!priv->rc_active) {
-		for (i = 0; i < ARRAY_SIZE(rc_sys_init_tab); i++) {
-			ret = rtl28xx_rd_reg(d, rc_sys_init_tab[i].reg, &buf[0]);
-			if (ret)
-				goto err;
-			if (rc_sys_init_tab[i].op == OP_AND) {
-				buf[0] &= rc_sys_init_tab[i].mask;
-			}
-			else {//OP_OR
-				buf[0] |= rc_sys_init_tab[i].mask;
-			}
-			ret = rtl28xx_wr_reg(d, rc_sys_init_tab[i].reg,
-					buf[0]);
-			if (ret)
-				goto err;
-		}
-		for (i = 0; i < ARRAY_SIZE(rc_init_tab); i++) {
-			ret = rtl28xx_wr_reg(d, rc_init_tab[i].reg,
-					rc_init_tab[i].val);
+		static const struct rtl28xxu_reg_val_mask init_tab[] = {
+			{SYS_DEMOD_CTL1,         0x00, 0x04},
+			{SYS_DEMOD_CTL1,         0x00, 0x08},
+			{USB_CTRL,               0x20, 0x20},
+			{SYS_GPIO_DIR,           0x00, 0x08},
+			{SYS_GPIO_OUT_EN,        0x08, 0x08},
+			{SYS_GPIO_OUT_VAL,       0x08, 0x08},
+			{IR_MAX_DURATION0,       0xd0, 0xff},
+			{IR_MAX_DURATION1,       0x07, 0xff},
+			{IR_IDLE_LEN0,           0xc0, 0xff},
+			{IR_IDLE_LEN1,           0x00, 0xff},
+			{IR_GLITCH_LEN,          0x03, 0xff},
+			{IR_RX_CLK,              0x09, 0xff},
+			{IR_RX_CFG,              0x1c, 0xff},
+			{IR_MAX_H_TOL_LEN,       0x1e, 0xff},
+			{IR_MAX_L_TOL_LEN,       0x1e, 0xff},
+			{IR_RX_CTRL,             0x80, 0xff},
+		};
+
+		for (i = 0; i < ARRAY_SIZE(init_tab); i++) {
+			ret = rtl28xx_wr_reg_mask(d, init_tab[i].reg,
+					init_tab[i].val, init_tab[i].mask);
 			if (ret)
 				goto err;
 		}
+
 		priv->rc_active = true;
 	}
 
@@ -1323,57 +1284,56 @@ static int rtl2832u_rc_query(struct dvb_usb_device *d)
 		goto err;
 
 	if (buf[0] != 0x83)
-		goto err;
+		goto exit;
 
 	ret = rtl28xx_rd_reg(d, IR_RX_BC, &buf[0]);
 	if (ret)
 		goto err;
 
 	len = buf[0];
-	ret = rtl2831_rd_regs(d, IR_RX_BUF, buf, len);
 
-	/* pass raw IR to Kernel IR decoder */
-	init_ir_raw_event(&ev);
-	ir_raw_event_reset(d->rc_dev);
-	ev.pulse=1;
-	for(i=0; true; ++i) { // conver count to time
-		if (i >= len || !(buf[i] & 0x80) != !(ev.pulse)) {//end or transition pulse/space: flush
-			ir_raw_event_store(d->rc_dev, &ev);
-			ev.duration = 0;
-		}
-		if (i >= len)
-			break;
-		ev.pulse = buf[i] >> 7;
-		ev.duration += TICSAT38KHZTONS(((u32)(buf[i] & 0x7F)) << 1);
-	}
-	ir_raw_event_handle(d->rc_dev);
+	/* read raw code from hw */
+	ret = rtl2831_rd_regs(d, IR_RX_BUF, buf, len);
+	if (ret)
+		goto err;
 
-	for (i = 0; i < ARRAY_SIZE(rc_clear_tab); i++) {
-		ret = rtl28xx_wr_reg(d, rc_clear_tab[i].reg,
-				rc_clear_tab[i].val);
+	/* let hw receive new code */
+	for (i = 0; i < ARRAY_SIZE(refresh_tab); i++) {
+		ret = rtl28xx_wr_reg_mask(d, refresh_tab[i].reg,
+				refresh_tab[i].val, refresh_tab[i].mask);
 		if (ret)
 			goto err;
 	}
 
+	/* pass data to Kernel IR decoder */
+	init_ir_raw_event(&ev);
+
+	for (i = 0; i < len; i++) {
+		ev.pulse = buf[i] >> 7;
+		ev.duration = 50800 * (buf[i] & 0x7f);
+		ir_raw_event_store_with_filter(d->rc_dev, &ev);
+	}
+
+	/* 'flush' ir_raw_event_store_with_filter() */
+	ir_raw_event_set_idle(d->rc_dev, true);
+	ir_raw_event_handle(d->rc_dev);
+exit:
 	return ret;
 err:
-	for (i = 0; i < ARRAY_SIZE(rc_reinit_tab); i++) {
-		ret = rtl28xx_wr_reg(d, rc_reinit_tab[i].reg,
-				rc_reinit_tab[i].val);
-	}
 	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
 	return ret;
-#undef TICSAT38KHZTONS
 }
 
 static int rtl2832u_get_rc_config(struct dvb_usb_device *d,
 		struct dvb_usb_rc *rc)
 {
-	rc->map_name = RC_MAP_EMPTY;
+	/* load empty to enable rc */
+	if (!rc->map_name)
+		rc->map_name = RC_MAP_EMPTY;
 	rc->allowed_protos = RC_BIT_ALL;
+	rc->driver_type = RC_DRIVER_IR_RAW;
 	rc->query = rtl2832u_rc_query;
 	rc->interval = 400;
-	rc->driver_type = RC_DRIVER_IR_RAW;
 
 	return 0;
 }
diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.h b/drivers/media/usb/dvb-usb-v2/rtl28xxu.h
index 0177b3871ba..729b3540c2f 100644
--- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.h
+++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.h
@@ -97,14 +97,9 @@ struct rtl28xxu_reg_val {
 	u8 val;
 };
 
-enum OP{
-	OP_AND	=0,
-	OP_OR
-};
-
-struct rtl28xxu_xreg_val {
+struct rtl28xxu_reg_val_mask {
 	u16 reg;
-	u8 op;
+	u8 val;
 	u8 mask;
 };
 
-- 
cgit v1.2.3-70-g09d2


From 5a18664e49549762d09e771ad02111d2c2721dc8 Mon Sep 17 00:00:00 2001
From: Antti Palosaari <crope@iki.fi>
Date: Tue, 4 Jun 2013 16:50:54 -0300
Subject: [media] rtl28xxu: remove redundant IS_ENABLED macro

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
index 41670116743..8bbc6abc9d3 100644
--- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
+++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
@@ -1231,11 +1231,7 @@ static int rtl2831u_get_rc_config(struct dvb_usb_device *d,
 
 	return 0;
 }
-#else
-	#define rtl2831u_get_rc_config NULL
-#endif
 
-#if IS_ENABLED(CONFIG_RC_CORE)
 static int rtl2832u_rc_query(struct dvb_usb_device *d)
 {
 	int ret, i, len;
@@ -1338,7 +1334,8 @@ static int rtl2832u_get_rc_config(struct dvb_usb_device *d,
 	return 0;
 }
 #else
-	#define rtl2832u_get_rc_config NULL
+#define rtl2831u_get_rc_config NULL
+#define rtl2832u_get_rc_config NULL
 #endif
 
 static const struct dvb_usb_device_properties rtl2831u_props = {
-- 
cgit v1.2.3-70-g09d2


From 6c5a4065ebb785bd60fdab4eebbf6582177d563a Mon Sep 17 00:00:00 2001
From: Miroslav Šustek <sustmidown@centrum.cz>
Date: Tue, 14 May 2013 19:42:11 -0300
Subject: [media] rtl28xxu: Add USB ID for Leadtek WinFast DTV Dongle mini
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

USB ID 0413:6a03 is Leadtek WinFast DTV Dongle mini.
Decoder Realtek RTL2832U and tuner Infineon TUA9001.

Signed-off-by: Miroslav Šustek <sustmidown@centrum.cz>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
index 8bbc6abc9d3..0045b198a53 100644
--- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
+++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
@@ -1424,6 +1424,8 @@ static const struct usb_device_id rtl28xxu_id_table[] = {
 		&rtl2832u_props, "Compro VideoMate U620F", NULL) },
 	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, 0xd394,
 		&rtl2832u_props, "MaxMedia HU394-T", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6a03,
+		&rtl2832u_props, "WinFast DTV Dongle mini", NULL) },
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, rtl28xxu_id_table);
-- 
cgit v1.2.3-70-g09d2


From 7dc0a0163498f922aa00051d0d8d438926d4d249 Mon Sep 17 00:00:00 2001
From: Antti Palosaari <crope@iki.fi>
Date: Tue, 4 Jun 2013 17:01:25 -0300
Subject: [media] rtl28xxu: correct some device names

... just because I want to be perfect ;)

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
index 0045b198a53..93313f70621 100644
--- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
+++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
@@ -1419,13 +1419,13 @@ static const struct usb_device_id rtl28xxu_id_table[] = {
 	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, 0xd393,
 		&rtl2832u_props, "GIGABYTE U7300", NULL) },
 	{ DVB_USB_DEVICE(USB_VID_DEXATEK, 0x1104,
-		&rtl2832u_props, "Digivox Micro Hd", NULL) },
+		&rtl2832u_props, "MSI DIGIVOX Micro HD", NULL) },
 	{ DVB_USB_DEVICE(USB_VID_COMPRO, 0x0620,
 		&rtl2832u_props, "Compro VideoMate U620F", NULL) },
 	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, 0xd394,
 		&rtl2832u_props, "MaxMedia HU394-T", NULL) },
 	{ DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6a03,
-		&rtl2832u_props, "WinFast DTV Dongle mini", NULL) },
+		&rtl2832u_props, "Leadtek WinFast DTV Dongle mini", NULL) },
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, rtl28xxu_id_table);
-- 
cgit v1.2.3-70-g09d2


From bc6fc53de8935031078c50b8a06324aeaf1b4034 Mon Sep 17 00:00:00 2001
From: Antti Palosaari <crope@iki.fi>
Date: Tue, 4 Jun 2013 17:24:06 -0300
Subject: [media] rtl28xxu: map remote for TerraTec Cinergy T Stick Black

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
index 93313f70621..04da6be4de2 100644
--- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
+++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
@@ -1395,7 +1395,7 @@ static const struct usb_device_id rtl28xxu_id_table[] = {
 	{ DVB_USB_DEVICE(USB_VID_REALTEK, 0x2838,
 		&rtl2832u_props, "Realtek RTL2832U reference design", NULL) },
 	{ DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_BLACK_REV1,
-		&rtl2832u_props, "TerraTec Cinergy T Stick Black", NULL) },
+		&rtl2832u_props, "TerraTec Cinergy T Stick Black", RC_MAP_TERRATEC_SLIM) },
 	{ DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_DELOCK_USB2_DVBT,
 		&rtl2832u_props, "G-Tek Electronics Group Lifeview LV5TDLX DVB-T", NULL) },
 	{ DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK,
-- 
cgit v1.2.3-70-g09d2


From 526ca8dc6ad844550e037841bd5f7090db9e1d4f Mon Sep 17 00:00:00 2001
From: Antti Palosaari <crope@iki.fi>
Date: Tue, 4 Jun 2013 18:26:54 -0300
Subject: [media] rtl28xxu: use masked reg write where possible

Use masked register write inside rtl2832u_power_ctrl().

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 72 ++++++++-------------------------
 1 file changed, 16 insertions(+), 56 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
index 04da6be4de2..6f5a3d0c818 100644
--- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
+++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
@@ -1041,67 +1041,34 @@ err:
 static int rtl2832u_power_ctrl(struct dvb_usb_device *d, int onoff)
 {
 	int ret;
-	u8 val;
 
 	dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);
 
 	if (onoff) {
-		/* set output values */
-		ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &val);
-		if (ret)
-			goto err;
-
-		val |= 0x08;
-		val &= 0xef;
-
-		ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, val);
-		if (ret)
-			goto err;
-
-		/* demod_ctl_1 */
-		ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL1, &val);
-		if (ret)
-			goto err;
-
-		val &= 0xef;
-
-		ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL1, val);
-		if (ret)
-			goto err;
-
-		/* demod control */
-		/* PLL enable */
-		ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL, &val);
+		/* GPIO3=1, GPIO4=0 */
+		ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x08, 0x18);
 		if (ret)
 			goto err;
 
-		/* bit 7 to 1 */
-		val |= 0x80;
-
-		ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val);
+		/* suspend? */
+		ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL1, 0x00, 0x10);
 		if (ret)
 			goto err;
 
-		ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL, &val);
+		/* enable PLL */
+		ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL, 0x80, 0x80);
 		if (ret)
 			goto err;
 
-		val |= 0x20;
-
-		ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val);
+		/* disable reset */
+		ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL, 0x20, 0x20);
 		if (ret)
 			goto err;
 
 		mdelay(5);
 
-		/*enable ADC_Q and ADC_I */
-		ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL, &val);
-		if (ret)
-			goto err;
-
-		val |= 0x48;
-
-		ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val);
+		/* enable ADC */
+		ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL, 0x48, 0x48);
 		if (ret)
 			goto err;
 
@@ -1114,25 +1081,18 @@ static int rtl2832u_power_ctrl(struct dvb_usb_device *d, int onoff)
 		if (ret)
 			goto err;
 	} else {
-		/* set output values */
-		ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &val);
-		if (ret)
-				goto err;
-
-		val |= 0x10;
-
-		ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, val);
+		/* GPIO4=1 */
+		ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x10, 0x10);
 		if (ret)
 			goto err;
 
-		/* demod control */
-		ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL, &val);
+		/* disable ADC */
+		ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL, 0x00, 0x48);
 		if (ret)
 			goto err;
 
-		val &= 0x37;
-
-		ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val);
+		/* disable PLL */
+		ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL, 0x00, 0x80);
 		if (ret)
 			goto err;
 
-- 
cgit v1.2.3-70-g09d2


From c6be75264b15cdabf067f8b78e954d26f6bab2a4 Mon Sep 17 00:00:00 2001
From: Alessandro Miceli <angelofsky1980@gmail.com>
Date: Tue, 4 Jun 2013 16:10:34 -0300
Subject: [media] Add support for Crypto Redi PC50A device (rtl2832u + FC0012
 tuner)

The device has been tested on a MIPSel box with kernel 3.1.1 and backported media_tree drivers
The kernel detects the device with the following output:
usbcore: registered new interface driver dvb_usb_rtl28xxu
usb 1-2: dvb_usb_v2: found a 'Crypto Redi PC50A' in warm state
usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (Crypto Redi PC50A)
usb 1-2: DVB: registering adapter 1 frontend 0 (Realtek RTL2832 (DVB-T))...
i2c i2c-4: fc0012: Fitipower FC0012 successfully identified
usb 1-2: dvb_usb_v2: 'Crypto Redi PC50A' successfully initialized and connected

[crope@iki.fi: fix trivial merge conflict]
Signed-off-by: Alessandro Miceli <angelofsky1980@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb-core/dvb-usb-ids.h    | 1 +
 drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 2 ++
 2 files changed, 3 insertions(+)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/dvb-core/dvb-usb-ids.h b/drivers/media/dvb-core/dvb-usb-ids.h
index 2e0709a66f8..886da16e14f 100644
--- a/drivers/media/dvb-core/dvb-usb-ids.h
+++ b/drivers/media/dvb-core/dvb-usb-ids.h
@@ -367,5 +367,6 @@
 #define USB_PID_TECHNISAT_USB2_HDCI_V2			0x0002
 #define USB_PID_TECHNISAT_AIRSTAR_TELESTICK_2		0x0004
 #define USB_PID_TECHNISAT_USB2_DVB_S2			0x0500
+#define USB_PID_CPYTO_REDI_PC50A			0xa803
 #define USB_PID_CTVDIGDUAL_V2				0xe410
 #endif
diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
index 6f5a3d0c818..a49abe4fa75 100644
--- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
+++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
@@ -1386,6 +1386,8 @@ static const struct usb_device_id rtl28xxu_id_table[] = {
 		&rtl2832u_props, "MaxMedia HU394-T", NULL) },
 	{ DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6a03,
 		&rtl2832u_props, "Leadtek WinFast DTV Dongle mini", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_CPYTO_REDI_PC50A,
+		&rtl2832u_props, "Crypto Redi PC50A", NULL) },
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, rtl28xxu_id_table);
-- 
cgit v1.2.3-70-g09d2


From 7df272563aa3ffc201ddfe2431de9bb7456e3ea6 Mon Sep 17 00:00:00 2001
From: Antti Palosaari <crope@iki.fi>
Date: Tue, 4 Jun 2013 19:43:30 -0300
Subject: [media] rtl28xxu: correct latest device name

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
index a49abe4fa75..9a3c044fda3 100644
--- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
+++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
@@ -1387,7 +1387,7 @@ static const struct usb_device_id rtl28xxu_id_table[] = {
 	{ DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6a03,
 		&rtl2832u_props, "Leadtek WinFast DTV Dongle mini", NULL) },
 	{ DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_CPYTO_REDI_PC50A,
-		&rtl2832u_props, "Crypto Redi PC50A", NULL) },
+		&rtl2832u_props, "Crypto ReDi PC 50 A", NULL) },
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, rtl28xxu_id_table);
-- 
cgit v1.2.3-70-g09d2


From ab6e134a48a58b111f28dfb5c8440a56d6be10c5 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hans.verkuil@cisco.com>
Date: Wed, 29 May 2013 03:55:13 -0300
Subject: [media] hdpvr: fix querystd 'unknown format' return

If no format has been detected, then querystd should return V4L2_STD_UNKNOWN,
not V4L2_STD_ALL.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/hdpvr/hdpvr-video.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/hdpvr/hdpvr-video.c b/drivers/media/usb/hdpvr/hdpvr-video.c
index 2d02b490756..81018c478f4 100644
--- a/drivers/media/usb/hdpvr/hdpvr-video.c
+++ b/drivers/media/usb/hdpvr/hdpvr-video.c
@@ -613,7 +613,7 @@ static int vidioc_querystd(struct file *file, void *_fh, v4l2_std_id *a)
 	struct hdpvr_fh *fh = _fh;
 	int ret;
 
-	*a = V4L2_STD_ALL;
+	*a = V4L2_STD_UNKNOWN;
 	if (dev->options.video_input == HDPVR_COMPONENT)
 		return fh->legacy_mode ? 0 : -ENODATA;
 	ret = get_video_info(dev, &vid_info);
-- 
cgit v1.2.3-70-g09d2


From 79f10b625e5eff93c8fad54ba345e5f35feb8461 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hans.verkuil@cisco.com>
Date: Wed, 29 May 2013 03:55:14 -0300
Subject: [media] hdpvr: code cleanup

Remove an unnecessary 'else' and invert a condition which makes the code
more readable.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/hdpvr/hdpvr-video.c | 54 +++++++++++++++++------------------
 1 file changed, 27 insertions(+), 27 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/hdpvr/hdpvr-video.c b/drivers/media/usb/hdpvr/hdpvr-video.c
index 81018c478f4..e9471059056 100644
--- a/drivers/media/usb/hdpvr/hdpvr-video.c
+++ b/drivers/media/usb/hdpvr/hdpvr-video.c
@@ -281,43 +281,43 @@ static int hdpvr_start_streaming(struct hdpvr_device *dev)
 
 	if (dev->status == STATUS_STREAMING)
 		return 0;
-	else if (dev->status != STATUS_IDLE)
+	if (dev->status != STATUS_IDLE)
 		return -EAGAIN;
 
 	ret = get_video_info(dev, &vidinf);
+	if (ret) {
+		msleep(250);
+		v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev,
+				"no video signal at input %d\n", dev->options.video_input);
+		return -EAGAIN;
+	}
 
-	if (!ret) {
-		v4l2_dbg(MSG_BUFFER, hdpvr_debug, &dev->v4l2_dev,
-			 "video signal: %dx%d@%dhz\n", vidinf.width,
-			 vidinf.height, vidinf.fps);
+	v4l2_dbg(MSG_BUFFER, hdpvr_debug, &dev->v4l2_dev,
+			"video signal: %dx%d@%dhz\n", vidinf.width,
+			vidinf.height, vidinf.fps);
 
-		/* start streaming 2 request */
-		ret = usb_control_msg(dev->udev,
-				      usb_sndctrlpipe(dev->udev, 0),
-				      0xb8, 0x38, 0x1, 0, NULL, 0, 8000);
-		v4l2_dbg(MSG_BUFFER, hdpvr_debug, &dev->v4l2_dev,
-			 "encoder start control request returned %d\n", ret);
-		if (ret < 0)
-			return ret;
+	/* start streaming 2 request */
+	ret = usb_control_msg(dev->udev,
+			usb_sndctrlpipe(dev->udev, 0),
+			0xb8, 0x38, 0x1, 0, NULL, 0, 8000);
+	v4l2_dbg(MSG_BUFFER, hdpvr_debug, &dev->v4l2_dev,
+			"encoder start control request returned %d\n", ret);
+	if (ret < 0)
+		return ret;
 
-		ret = hdpvr_config_call(dev, CTRL_START_STREAMING_VALUE, 0x00);
-		if (ret)
-			return ret;
+	ret = hdpvr_config_call(dev, CTRL_START_STREAMING_VALUE, 0x00);
+	if (ret)
+		return ret;
 
-		dev->status = STATUS_STREAMING;
+	dev->status = STATUS_STREAMING;
 
-		INIT_WORK(&dev->worker, hdpvr_transmit_buffers);
-		queue_work(dev->workqueue, &dev->worker);
+	INIT_WORK(&dev->worker, hdpvr_transmit_buffers);
+	queue_work(dev->workqueue, &dev->worker);
 
-		v4l2_dbg(MSG_BUFFER, hdpvr_debug, &dev->v4l2_dev,
-			 "streaming started\n");
+	v4l2_dbg(MSG_BUFFER, hdpvr_debug, &dev->v4l2_dev,
+			"streaming started\n");
 
-		return 0;
-	}
-	msleep(250);
-	v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev,
-		 "no video signal at input %d\n", dev->options.video_input);
-	return -EAGAIN;
+	return 0;
 }
 
 
-- 
cgit v1.2.3-70-g09d2


From 5f454d82e5958e59c16580b9b4531f4bbc7231f7 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hans.verkuil@cisco.com>
Date: Wed, 29 May 2013 03:55:15 -0300
Subject: [media] hdpvr: improve error handling

get_video_info() should never return EFAULT, instead it should return
the low-level usb_control_msg() error. Add a valid field to the hdpvr_video_info
struct so the driver can easily check if a valid format was detected.
Whenever get_video_info is called and it returns an error (e.g. usb_control_msg
failed), then return that error to userspace as well.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/hdpvr/hdpvr-control.c | 21 +++++++++------------
 drivers/media/usb/hdpvr/hdpvr-video.c   | 18 +++++++++++-------
 drivers/media/usb/hdpvr/hdpvr.h         |  1 +
 3 files changed, 21 insertions(+), 19 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/hdpvr/hdpvr-control.c b/drivers/media/usb/hdpvr/hdpvr-control.c
index df6bcb524d8..6053661dc04 100644
--- a/drivers/media/usb/hdpvr/hdpvr-control.c
+++ b/drivers/media/usb/hdpvr/hdpvr-control.c
@@ -49,6 +49,7 @@ int get_video_info(struct hdpvr_device *dev, struct hdpvr_video_info *vidinf)
 {
 	int ret;
 
+	vidinf->valid = false;
 	mutex_lock(&dev->usbc_mutex);
 	ret = usb_control_msg(dev->udev,
 			      usb_rcvctrlpipe(dev->udev, 0),
@@ -56,11 +57,6 @@ int get_video_info(struct hdpvr_device *dev, struct hdpvr_video_info *vidinf)
 			      0x1400, 0x0003,
 			      dev->usbc_buf, 5,
 			      1000);
-	if (ret == 5) {
-		vidinf->width	= dev->usbc_buf[1] << 8 | dev->usbc_buf[0];
-		vidinf->height	= dev->usbc_buf[3] << 8 | dev->usbc_buf[2];
-		vidinf->fps	= dev->usbc_buf[4];
-	}
 
 #ifdef HDPVR_DEBUG
 	if (hdpvr_debug & MSG_INFO) {
@@ -73,14 +69,15 @@ int get_video_info(struct hdpvr_device *dev, struct hdpvr_video_info *vidinf)
 #endif
 	mutex_unlock(&dev->usbc_mutex);
 
-	if ((ret > 0 && ret != 5) ||/* fail if unexpected byte count returned */
-	    !vidinf->width ||	/* preserve original behavior -  */
-	    !vidinf->height ||	/* fail if no signal is detected */
-	    !vidinf->fps) {
-		ret = -EFAULT;
-	}
+	if (ret < 0)
+		return ret;
 
-	return ret < 0 ? ret : 0;
+	vidinf->width	= dev->usbc_buf[1] << 8 | dev->usbc_buf[0];
+	vidinf->height	= dev->usbc_buf[3] << 8 | dev->usbc_buf[2];
+	vidinf->fps	= dev->usbc_buf[4];
+	vidinf->valid   = vidinf->width && vidinf->height && vidinf->fps;
+
+	return 0;
 }
 
 int get_input_lines_info(struct hdpvr_device *dev)
diff --git a/drivers/media/usb/hdpvr/hdpvr-video.c b/drivers/media/usb/hdpvr/hdpvr-video.c
index e9471059056..4f8567aa99d 100644
--- a/drivers/media/usb/hdpvr/hdpvr-video.c
+++ b/drivers/media/usb/hdpvr/hdpvr-video.c
@@ -285,7 +285,10 @@ static int hdpvr_start_streaming(struct hdpvr_device *dev)
 		return -EAGAIN;
 
 	ret = get_video_info(dev, &vidinf);
-	if (ret) {
+	if (ret < 0)
+		return ret;
+
+	if (!vidinf.valid) {
 		msleep(250);
 		v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev,
 				"no video signal at input %d\n", dev->options.video_input);
@@ -617,15 +620,12 @@ static int vidioc_querystd(struct file *file, void *_fh, v4l2_std_id *a)
 	if (dev->options.video_input == HDPVR_COMPONENT)
 		return fh->legacy_mode ? 0 : -ENODATA;
 	ret = get_video_info(dev, &vid_info);
-	if (ret)
-		return 0;
-	if (vid_info.width == 720 &&
+	if (vid_info.valid && vid_info.width == 720 &&
 	    (vid_info.height == 480 || vid_info.height == 576)) {
 		*a = (vid_info.height == 480) ?
 			V4L2_STD_525_60 : V4L2_STD_625_50;
 	}
-
-	return 0;
+	return ret;
 }
 
 static int vidioc_s_dv_timings(struct file *file, void *_fh,
@@ -679,6 +679,8 @@ static int vidioc_query_dv_timings(struct file *file, void *_fh,
 		return -ENODATA;
 	ret = get_video_info(dev, &vid_info);
 	if (ret)
+		return ret;
+	if (!vid_info.valid)
 		return -ENOLCK;
 	interlaced = vid_info.fps <= 30;
 	for (i = 0; i < ARRAY_SIZE(hdpvr_dv_timings); i++) {
@@ -1008,7 +1010,9 @@ static int vidioc_g_fmt_vid_cap(struct file *file, void *_fh,
 		struct hdpvr_video_info vid_info;
 
 		ret = get_video_info(dev, &vid_info);
-		if (ret)
+		if (ret < 0)
+			return ret;
+		if (!vid_info.valid)
 			return -EFAULT;
 		f->fmt.pix.width = vid_info.width;
 		f->fmt.pix.height = vid_info.height;
diff --git a/drivers/media/usb/hdpvr/hdpvr.h b/drivers/media/usb/hdpvr/hdpvr.h
index 808ea7a0efe..dc685d44cb3 100644
--- a/drivers/media/usb/hdpvr/hdpvr.h
+++ b/drivers/media/usb/hdpvr/hdpvr.h
@@ -154,6 +154,7 @@ struct hdpvr_video_info {
 	u16	width;
 	u16	height;
 	u8	fps;
+	bool	valid;
 };
 
 enum {
-- 
cgit v1.2.3-70-g09d2


From abca2056dc3dd0d813ba2f8b013e98cf009ba168 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hans.verkuil@cisco.com>
Date: Wed, 29 May 2013 06:59:35 -0300
Subject: [media] v4l2: remove g_chip_ident from bridge drivers where it is
 easy to do so

VIDIOC_DBG_G_CHIP_IDENT has been replaced by VIDIOC_DBG_G_CHIP_INFO. Remove
g_chip_ident support from bridge drivers since it is no longer needed.
This patch takes care of all the trivial cases.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/common/saa7146/saa7146_video.c   | 23 ---------
 drivers/media/pci/bt8xx/bttv-driver.c          | 38 ---------------
 drivers/media/pci/saa7134/saa7134-empress.c    | 17 -------
 drivers/media/pci/saa7134/saa7134-video.c      |  4 --
 drivers/media/pci/saa7146/mxb.c                | 15 ++----
 drivers/media/pci/saa7164/saa7164-encoder.c    | 37 ---------------
 drivers/media/pci/saa7164/saa7164-vbi.c        |  9 ----
 drivers/media/pci/saa7164/saa7164.h            |  1 -
 drivers/media/platform/blackfin/bfin_capture.c | 41 ----------------
 drivers/media/platform/davinci/vpif_capture.c  | 66 --------------------------
 drivers/media/platform/davinci/vpif_display.c  | 66 --------------------------
 drivers/media/platform/sh_vou.c                | 31 ------------
 drivers/media/platform/soc_camera/soc_camera.c | 34 -------------
 drivers/media/platform/via-camera.c            | 16 -------
 drivers/media/radio/radio-si476x.c             | 11 -----
 drivers/media/usb/au0828/au0828-video.c        | 39 ---------------
 drivers/media/usb/em28xx/em28xx-video.c        | 66 +++-----------------------
 drivers/media/usb/stk1160/stk1160-v4l.c        | 41 ----------------
 18 files changed, 10 insertions(+), 545 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/common/saa7146/saa7146_video.c b/drivers/media/common/saa7146/saa7146_video.c
index fe907f2e8f5..30779498c17 100644
--- a/drivers/media/common/saa7146/saa7146_video.c
+++ b/drivers/media/common/saa7146/saa7146_video.c
@@ -1,7 +1,6 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <media/saa7146_vv.h>
-#include <media/v4l2-chip-ident.h>
 #include <media/v4l2-event.h>
 #include <media/v4l2-ctrls.h>
 #include <linux/module.h>
@@ -988,26 +987,6 @@ static int vidioc_streamoff(struct file *file, void *__fh, enum v4l2_buf_type ty
 	return err;
 }
 
-static int vidioc_g_chip_ident(struct file *file, void *__fh,
-		struct v4l2_dbg_chip_ident *chip)
-{
-	struct saa7146_fh *fh = __fh;
-	struct saa7146_dev *dev = fh->dev;
-
-	chip->ident = V4L2_IDENT_NONE;
-	chip->revision = 0;
-	if (chip->match.type == V4L2_CHIP_MATCH_HOST) {
-		if (v4l2_chip_match_host(&chip->match))
-			chip->ident = V4L2_IDENT_SAA7146;
-		return 0;
-	}
-	if (chip->match.type != V4L2_CHIP_MATCH_I2C_DRIVER &&
-	    chip->match.type != V4L2_CHIP_MATCH_I2C_ADDR)
-		return -EINVAL;
-	return v4l2_device_call_until_err(&dev->v4l2_dev, 0,
-			core, g_chip_ident, chip);
-}
-
 const struct v4l2_ioctl_ops saa7146_video_ioctl_ops = {
 	.vidioc_querycap             = vidioc_querycap,
 	.vidioc_enum_fmt_vid_cap     = vidioc_enum_fmt_vid_cap,
@@ -1018,7 +997,6 @@ const struct v4l2_ioctl_ops saa7146_video_ioctl_ops = {
 	.vidioc_g_fmt_vid_overlay    = vidioc_g_fmt_vid_overlay,
 	.vidioc_try_fmt_vid_overlay  = vidioc_try_fmt_vid_overlay,
 	.vidioc_s_fmt_vid_overlay    = vidioc_s_fmt_vid_overlay,
-	.vidioc_g_chip_ident         = vidioc_g_chip_ident,
 
 	.vidioc_overlay 	     = vidioc_overlay,
 	.vidioc_g_fbuf  	     = vidioc_g_fbuf,
@@ -1039,7 +1017,6 @@ const struct v4l2_ioctl_ops saa7146_video_ioctl_ops = {
 const struct v4l2_ioctl_ops saa7146_vbi_ioctl_ops = {
 	.vidioc_querycap             = vidioc_querycap,
 	.vidioc_g_fmt_vbi_cap        = vidioc_g_fmt_vbi_cap,
-	.vidioc_g_chip_ident         = vidioc_g_chip_ident,
 
 	.vidioc_reqbufs              = vidioc_reqbufs,
 	.vidioc_querybuf             = vidioc_querybuf,
diff --git a/drivers/media/pci/bt8xx/bttv-driver.c b/drivers/media/pci/bt8xx/bttv-driver.c
index a334c94a303..bfcfa3e8543 100644
--- a/drivers/media/pci/bt8xx/bttv-driver.c
+++ b/drivers/media/pci/bt8xx/bttv-driver.c
@@ -50,7 +50,6 @@
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-event.h>
-#include <media/v4l2-chip-ident.h>
 #include <media/tvaudio.h>
 #include <media/msp3400.h>
 
@@ -1907,28 +1906,6 @@ static int bttv_log_status(struct file *file, void *f)
 	return 0;
 }
 
-static int bttv_g_chip_ident(struct file *file, void *f, struct v4l2_dbg_chip_ident *chip)
-{
-	struct bttv_fh *fh  = f;
-	struct bttv *btv = fh->btv;
-
-	chip->ident = V4L2_IDENT_NONE;
-	chip->revision = 0;
-	if (chip->match.type == V4L2_CHIP_MATCH_HOST) {
-		if (v4l2_chip_match_host(&chip->match)) {
-			chip->ident = btv->id;
-			if (chip->ident == PCI_DEVICE_ID_FUSION879)
-				chip->ident = V4L2_IDENT_BT879;
-		}
-		return 0;
-	}
-	if (chip->match.type != V4L2_CHIP_MATCH_I2C_DRIVER &&
-	    chip->match.type != V4L2_CHIP_MATCH_I2C_ADDR)
-		return -EINVAL;
-	/* TODO: is this correct? */
-	return bttv_call_all_err(btv, core, g_chip_ident, chip);
-}
-
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 static int bttv_g_register(struct file *file, void *f,
 					struct v4l2_dbg_register *reg)
@@ -1936,13 +1913,6 @@ static int bttv_g_register(struct file *file, void *f,
 	struct bttv_fh *fh = f;
 	struct bttv *btv = fh->btv;
 
-	if (!v4l2_chip_match_host(&reg->match)) {
-		/* TODO: subdev errors should not be ignored, this should become a
-		   subdev helper function. */
-		bttv_call_all(btv, core, g_register, reg);
-		return 0;
-	}
-
 	/* bt848 has a 12-bit register space */
 	reg->reg &= 0xfff;
 	reg->val = btread(reg->reg);
@@ -1957,13 +1927,6 @@ static int bttv_s_register(struct file *file, void *f,
 	struct bttv_fh *fh = f;
 	struct bttv *btv = fh->btv;
 
-	if (!v4l2_chip_match_host(&reg->match)) {
-		/* TODO: subdev errors should not be ignored, this should become a
-		   subdev helper function. */
-		bttv_call_all(btv, core, s_register, reg);
-		return 0;
-	}
-
 	/* bt848 has a 12-bit register space */
 	btwrite(reg->val, reg->reg & 0xfff);
 
@@ -3203,7 +3166,6 @@ static const struct v4l2_ioctl_ops bttv_ioctl_ops = {
 	.vidioc_querystd		= bttv_querystd,
 	.vidioc_subscribe_event		= v4l2_ctrl_subscribe_event,
 	.vidioc_unsubscribe_event	= v4l2_event_unsubscribe,
-	.vidioc_g_chip_ident		= bttv_g_chip_ident,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.vidioc_g_register		= bttv_g_register,
 	.vidioc_s_register		= bttv_s_register,
diff --git a/drivers/media/pci/saa7134/saa7134-empress.c b/drivers/media/pci/saa7134/saa7134-empress.c
index 66a70814004..05ab2cb7ef3 100644
--- a/drivers/media/pci/saa7134/saa7134-empress.c
+++ b/drivers/media/pci/saa7134/saa7134-empress.c
@@ -28,7 +28,6 @@
 
 #include <media/saa6752hs.h>
 #include <media/v4l2-common.h>
-#include <media/v4l2-chip-ident.h>
 
 /* ------------------------------------------------------------------ */
 
@@ -413,21 +412,6 @@ static int empress_querymenu(struct file *file, void *priv,
 	return saa_call_empress(dev, core, querymenu, c);
 }
 
-static int empress_g_chip_ident(struct file *file, void *fh,
-	       struct v4l2_dbg_chip_ident *chip)
-{
-	struct saa7134_dev *dev = file->private_data;
-
-	chip->ident = V4L2_IDENT_NONE;
-	chip->revision = 0;
-	if (chip->match.type == V4L2_CHIP_MATCH_I2C_DRIVER &&
-	    !strcmp(chip->match.name, "saa6752hs"))
-		return saa_call_empress(dev, core, g_chip_ident, chip);
-	if (chip->match.type == V4L2_CHIP_MATCH_I2C_ADDR)
-		return saa_call_empress(dev, core, g_chip_ident, chip);
-	return -EINVAL;
-}
-
 static int empress_s_std(struct file *file, void *priv, v4l2_std_id id)
 {
 	struct saa7134_dev *dev = file->private_data;
@@ -475,7 +459,6 @@ static const struct v4l2_ioctl_ops ts_ioctl_ops = {
 	.vidioc_querymenu		= empress_querymenu,
 	.vidioc_g_ctrl			= empress_g_ctrl,
 	.vidioc_s_ctrl			= empress_s_ctrl,
-	.vidioc_g_chip_ident 		= empress_g_chip_ident,
 	.vidioc_s_std			= empress_s_std,
 	.vidioc_g_std			= empress_g_std,
 };
diff --git a/drivers/media/pci/saa7134/saa7134-video.c b/drivers/media/pci/saa7134/saa7134-video.c
index cc409380ee1..737e643be27 100644
--- a/drivers/media/pci/saa7134/saa7134-video.c
+++ b/drivers/media/pci/saa7134/saa7134-video.c
@@ -2258,8 +2258,6 @@ static int vidioc_g_register (struct file *file, void *priv,
 	struct saa7134_fh *fh = priv;
 	struct saa7134_dev *dev = fh->dev;
 
-	if (!v4l2_chip_match_host(&reg->match))
-		return -EINVAL;
 	reg->val = saa_readb(reg->reg);
 	reg->size = 1;
 	return 0;
@@ -2271,8 +2269,6 @@ static int vidioc_s_register (struct file *file, void *priv,
 	struct saa7134_fh *fh = priv;
 	struct saa7134_dev *dev = fh->dev;
 
-	if (!v4l2_chip_match_host(&reg->match))
-		return -EINVAL;
 	saa_writeb(reg->reg&0xffffff, reg->val);
 	return 0;
 }
diff --git a/drivers/media/pci/saa7146/mxb.c b/drivers/media/pci/saa7146/mxb.c
index 52cbe7a027c..8d177691cd7 100644
--- a/drivers/media/pci/saa7146/mxb.c
+++ b/drivers/media/pci/saa7146/mxb.c
@@ -669,12 +669,8 @@ static int vidioc_g_register(struct file *file, void *fh, struct v4l2_dbg_regist
 {
 	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
 
-	if (v4l2_chip_match_host(&reg->match)) {
-		reg->val = saa7146_read(dev, reg->reg);
-		reg->size = 4;
-		return 0;
-	}
-	call_all(dev, core, g_register, reg);
+	reg->val = saa7146_read(dev, reg->reg);
+	reg->size = 4;
 	return 0;
 }
 
@@ -682,11 +678,8 @@ static int vidioc_s_register(struct file *file, void *fh, const struct v4l2_dbg_
 {
 	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
 
-	if (v4l2_chip_match_host(&reg->match)) {
-		saa7146_write(dev, reg->reg, reg->val);
-		return 0;
-	}
-	return call_all(dev, core, s_register, reg);
+	saa7146_write(dev, reg->reg, reg->val);
+	return 0;
 }
 #endif
 
diff --git a/drivers/media/pci/saa7164/saa7164-encoder.c b/drivers/media/pci/saa7164/saa7164-encoder.c
index 63a72fb71f3..e4f53a55eab 100644
--- a/drivers/media/pci/saa7164/saa7164-encoder.c
+++ b/drivers/media/pci/saa7164/saa7164-encoder.c
@@ -1288,38 +1288,6 @@ static const struct v4l2_file_operations mpeg_fops = {
 	.unlocked_ioctl	= video_ioctl2,
 };
 
-static int saa7164_g_chip_ident(struct file *file, void *fh,
-				struct v4l2_dbg_chip_ident *chip)
-{
-	struct saa7164_port *port = ((struct saa7164_encoder_fh *)fh)->port;
-	struct saa7164_dev *dev = port->dev;
-	dprintk(DBGLVL_ENC, "%s()\n", __func__);
-
-	return 0;
-}
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int saa7164_g_register(struct file *file, void *fh,
-			      struct v4l2_dbg_register *reg)
-{
-	struct saa7164_port *port = ((struct saa7164_encoder_fh *)fh)->port;
-	struct saa7164_dev *dev = port->dev;
-	dprintk(DBGLVL_ENC, "%s()\n", __func__);
-
-	return 0;
-}
-
-static int saa7164_s_register(struct file *file, void *fh,
-			      const struct v4l2_dbg_register *reg)
-{
-	struct saa7164_port *port = ((struct saa7164_encoder_fh *)fh)->port;
-	struct saa7164_dev *dev = port->dev;
-	dprintk(DBGLVL_ENC, "%s()\n", __func__);
-
-	return 0;
-}
-#endif
-
 static const struct v4l2_ioctl_ops mpeg_ioctl_ops = {
 	.vidioc_s_std		 = vidioc_s_std,
 	.vidioc_enum_input	 = vidioc_enum_input,
@@ -1340,11 +1308,6 @@ static const struct v4l2_ioctl_ops mpeg_ioctl_ops = {
 	.vidioc_s_ext_ctrls	 = vidioc_s_ext_ctrls,
 	.vidioc_try_ext_ctrls	 = vidioc_try_ext_ctrls,
 	.vidioc_queryctrl	 = vidioc_queryctrl,
-	.vidioc_g_chip_ident	 = saa7164_g_chip_ident,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.vidioc_g_register	 = saa7164_g_register,
-	.vidioc_s_register	 = saa7164_s_register,
-#endif
 };
 
 static struct video_device saa7164_mpeg_template = {
diff --git a/drivers/media/pci/saa7164/saa7164-vbi.c b/drivers/media/pci/saa7164/saa7164-vbi.c
index da224eb39b9..5a1a69b3dd1 100644
--- a/drivers/media/pci/saa7164/saa7164-vbi.c
+++ b/drivers/media/pci/saa7164/saa7164-vbi.c
@@ -1254,15 +1254,6 @@ static const struct v4l2_ioctl_ops vbi_ioctl_ops = {
 	.vidioc_s_ext_ctrls	 = vidioc_s_ext_ctrls,
 	.vidioc_try_ext_ctrls	 = vidioc_try_ext_ctrls,
 	.vidioc_queryctrl	 = vidioc_queryctrl,
-#if 0
-	.vidioc_g_chip_ident	 = saa7164_g_chip_ident,
-#endif
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-#if 0
-	.vidioc_g_register	 = saa7164_g_register,
-	.vidioc_s_register	 = saa7164_s_register,
-#endif
-#endif
 	.vidioc_g_fmt_vbi_cap	 = saa7164_vbi_fmt,
 	.vidioc_try_fmt_vbi_cap	 = saa7164_vbi_fmt,
 	.vidioc_s_fmt_vbi_cap	 = saa7164_vbi_fmt,
diff --git a/drivers/media/pci/saa7164/saa7164.h b/drivers/media/pci/saa7164/saa7164.h
index 437284e747c..8d9c7e69224 100644
--- a/drivers/media/pci/saa7164/saa7164.h
+++ b/drivers/media/pci/saa7164/saa7164.h
@@ -63,7 +63,6 @@
 #include <dmxdev.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
-#include <media/v4l2-chip-ident.h>
 
 #include "saa7164-reg.h"
 #include "saa7164-types.h"
diff --git a/drivers/media/platform/blackfin/bfin_capture.c b/drivers/media/platform/blackfin/bfin_capture.c
index ca8d56aecfb..6652e71ea79 100644
--- a/drivers/media/platform/blackfin/bfin_capture.c
+++ b/drivers/media/platform/blackfin/bfin_capture.c
@@ -32,7 +32,6 @@
 #include <linux/time.h>
 #include <linux/types.h>
 
-#include <media/v4l2-chip-ident.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-device.h>
@@ -876,41 +875,6 @@ static int bcap_s_parm(struct file *file, void *fh,
 	return v4l2_subdev_call(bcap_dev->sd, video, s_parm, a);
 }
 
-static int bcap_g_chip_ident(struct file *file, void *priv,
-		struct v4l2_dbg_chip_ident *chip)
-{
-	struct bcap_device *bcap_dev = video_drvdata(file);
-
-	chip->ident = V4L2_IDENT_NONE;
-	chip->revision = 0;
-	if (chip->match.type != V4L2_CHIP_MATCH_I2C_DRIVER &&
-			chip->match.type != V4L2_CHIP_MATCH_I2C_ADDR)
-		return -EINVAL;
-
-	return v4l2_subdev_call(bcap_dev->sd, core,
-			g_chip_ident, chip);
-}
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int bcap_dbg_g_register(struct file *file, void *priv,
-		struct v4l2_dbg_register *reg)
-{
-	struct bcap_device *bcap_dev = video_drvdata(file);
-
-	return v4l2_subdev_call(bcap_dev->sd, core,
-			g_register, reg);
-}
-
-static int bcap_dbg_s_register(struct file *file, void *priv,
-		const struct v4l2_dbg_register *reg)
-{
-	struct bcap_device *bcap_dev = video_drvdata(file);
-
-	return v4l2_subdev_call(bcap_dev->sd, core,
-			s_register, reg);
-}
-#endif
-
 static int bcap_log_status(struct file *file, void *priv)
 {
 	struct bcap_device *bcap_dev = video_drvdata(file);
@@ -943,11 +907,6 @@ static const struct v4l2_ioctl_ops bcap_ioctl_ops = {
 	.vidioc_streamoff        = bcap_streamoff,
 	.vidioc_g_parm           = bcap_g_parm,
 	.vidioc_s_parm           = bcap_s_parm,
-	.vidioc_g_chip_ident     = bcap_g_chip_ident,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.vidioc_g_register       = bcap_dbg_g_register,
-	.vidioc_s_register       = bcap_dbg_s_register,
-#endif
 	.vidioc_log_status       = bcap_log_status,
 };
 
diff --git a/drivers/media/platform/davinci/vpif_capture.c b/drivers/media/platform/davinci/vpif_capture.c
index caaf4fedade..d004531e740 100644
--- a/drivers/media/platform/davinci/vpif_capture.c
+++ b/drivers/media/platform/davinci/vpif_capture.c
@@ -24,7 +24,6 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
-#include <media/v4l2-chip-ident.h>
 #include <media/v4l2-ioctl.h>
 
 #include "vpif.h"
@@ -1862,66 +1861,6 @@ static int vpif_g_dv_timings(struct file *file, void *priv,
 	return 0;
 }
 
-/*
- * vpif_g_chip_ident() - Identify the chip
- * @file: file ptr
- * @priv: file handle
- * @chip: chip identity
- *
- * Returns zero or -EINVAL if read operations fails.
- */
-static int vpif_g_chip_ident(struct file *file, void *priv,
-		struct v4l2_dbg_chip_ident *chip)
-{
-	chip->ident = V4L2_IDENT_NONE;
-	chip->revision = 0;
-	if (chip->match.type != V4L2_CHIP_MATCH_I2C_DRIVER &&
-			chip->match.type != V4L2_CHIP_MATCH_I2C_ADDR) {
-		vpif_dbg(2, debug, "match_type is invalid.\n");
-		return -EINVAL;
-	}
-
-	return v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 0, core,
-			g_chip_ident, chip);
-}
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-/*
- * vpif_dbg_g_register() - Read register
- * @file: file ptr
- * @priv: file handle
- * @reg: register to be read
- *
- * Debugging only
- * Returns zero or -EINVAL if read operations fails.
- */
-static int vpif_dbg_g_register(struct file *file, void *priv,
-		struct v4l2_dbg_register *reg){
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-
-	return v4l2_subdev_call(ch->sd, core, g_register, reg);
-}
-
-/*
- * vpif_dbg_s_register() - Write to register
- * @file: file ptr
- * @priv: file handle
- * @reg: register to be modified
- *
- * Debugging only
- * Returns zero or -EINVAL if write operations fails.
- */
-static int vpif_dbg_s_register(struct file *file, void *priv,
-		const struct v4l2_dbg_register *reg)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-
-	return v4l2_subdev_call(ch->sd, core, s_register, reg);
-}
-#endif
-
 /*
  * vpif_log_status() - Status information
  * @file: file ptr
@@ -1963,11 +1902,6 @@ static const struct v4l2_ioctl_ops vpif_ioctl_ops = {
 	.vidioc_query_dv_timings        = vpif_query_dv_timings,
 	.vidioc_s_dv_timings            = vpif_s_dv_timings,
 	.vidioc_g_dv_timings            = vpif_g_dv_timings,
-	.vidioc_g_chip_ident		= vpif_g_chip_ident,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.vidioc_g_register		= vpif_dbg_g_register,
-	.vidioc_s_register		= vpif_dbg_s_register,
-#endif
 	.vidioc_log_status		= vpif_log_status,
 };
 
diff --git a/drivers/media/platform/davinci/vpif_display.c b/drivers/media/platform/davinci/vpif_display.c
index 5b6f9065b88..6c521f23e40 100644
--- a/drivers/media/platform/davinci/vpif_display.c
+++ b/drivers/media/platform/davinci/vpif_display.c
@@ -19,7 +19,6 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
-#include <media/v4l2-chip-ident.h>
 #include <media/v4l2-ioctl.h>
 
 #include "vpif.h"
@@ -1500,66 +1499,6 @@ static int vpif_g_dv_timings(struct file *file, void *priv,
 	return 0;
 }
 
-/*
- * vpif_g_chip_ident() - Identify the chip
- * @file: file ptr
- * @priv: file handle
- * @chip: chip identity
- *
- * Returns zero or -EINVAL if read operations fails.
- */
-static int vpif_g_chip_ident(struct file *file, void *priv,
-		struct v4l2_dbg_chip_ident *chip)
-{
-	chip->ident = V4L2_IDENT_NONE;
-	chip->revision = 0;
-	if (chip->match.type != V4L2_CHIP_MATCH_I2C_DRIVER &&
-			chip->match.type != V4L2_CHIP_MATCH_I2C_ADDR) {
-		vpif_dbg(2, debug, "match_type is invalid.\n");
-		return -EINVAL;
-	}
-
-	return v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 0, core,
-			g_chip_ident, chip);
-}
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-/*
- * vpif_dbg_g_register() - Read register
- * @file: file ptr
- * @priv: file handle
- * @reg: register to be read
- *
- * Debugging only
- * Returns zero or -EINVAL if read operations fails.
- */
-static int vpif_dbg_g_register(struct file *file, void *priv,
-		struct v4l2_dbg_register *reg){
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-
-	return v4l2_subdev_call(ch->sd, core, g_register, reg);
-}
-
-/*
- * vpif_dbg_s_register() - Write to register
- * @file: file ptr
- * @priv: file handle
- * @reg: register to be modified
- *
- * Debugging only
- * Returns zero or -EINVAL if write operations fails.
- */
-static int vpif_dbg_s_register(struct file *file, void *priv,
-		const struct v4l2_dbg_register *reg)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-
-	return v4l2_subdev_call(ch->sd, core, s_register, reg);
-}
-#endif
-
 /*
  * vpif_log_status() - Status information
  * @file: file ptr
@@ -1599,11 +1538,6 @@ static const struct v4l2_ioctl_ops vpif_ioctl_ops = {
 	.vidioc_enum_dv_timings         = vpif_enum_dv_timings,
 	.vidioc_s_dv_timings            = vpif_s_dv_timings,
 	.vidioc_g_dv_timings            = vpif_g_dv_timings,
-	.vidioc_g_chip_ident		= vpif_g_chip_ident,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.vidioc_g_register		= vpif_dbg_g_register,
-	.vidioc_s_register		= vpif_dbg_s_register,
-#endif
 	.vidioc_log_status		= vpif_log_status,
 };
 
diff --git a/drivers/media/platform/sh_vou.c b/drivers/media/platform/sh_vou.c
index 7d0235069c8..fa8ae724152 100644
--- a/drivers/media/platform/sh_vou.c
+++ b/drivers/media/platform/sh_vou.c
@@ -1248,32 +1248,6 @@ static unsigned int sh_vou_poll(struct file *file, poll_table *wait)
 	return res;
 }
 
-static int sh_vou_g_chip_ident(struct file *file, void *fh,
-				   struct v4l2_dbg_chip_ident *id)
-{
-	struct sh_vou_device *vou_dev = video_drvdata(file);
-
-	return v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0, core, g_chip_ident, id);
-}
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int sh_vou_g_register(struct file *file, void *fh,
-				 struct v4l2_dbg_register *reg)
-{
-	struct sh_vou_device *vou_dev = video_drvdata(file);
-
-	return v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0, core, g_register, reg);
-}
-
-static int sh_vou_s_register(struct file *file, void *fh,
-				 const struct v4l2_dbg_register *reg)
-{
-	struct sh_vou_device *vou_dev = video_drvdata(file);
-
-	return v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0, core, s_register, reg);
-}
-#endif
-
 /* sh_vou display ioctl operations */
 static const struct v4l2_ioctl_ops sh_vou_ioctl_ops = {
 	.vidioc_querycap        	= sh_vou_querycap,
@@ -1292,11 +1266,6 @@ static const struct v4l2_ioctl_ops sh_vou_ioctl_ops = {
 	.vidioc_cropcap			= sh_vou_cropcap,
 	.vidioc_g_crop			= sh_vou_g_crop,
 	.vidioc_s_crop			= sh_vou_s_crop,
-	.vidioc_g_chip_ident		= sh_vou_g_chip_ident,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.vidioc_g_register		= sh_vou_g_register,
-	.vidioc_s_register		= sh_vou_s_register,
-#endif
 };
 
 static const struct v4l2_file_operations sh_vou_fops = {
diff --git a/drivers/media/platform/soc_camera/soc_camera.c b/drivers/media/platform/soc_camera/soc_camera.c
index eea832c5fd0..68efade15a7 100644
--- a/drivers/media/platform/soc_camera/soc_camera.c
+++ b/drivers/media/platform/soc_camera/soc_camera.c
@@ -1036,35 +1036,6 @@ static int soc_camera_s_parm(struct file *file, void *fh,
 	return -ENOIOCTLCMD;
 }
 
-static int soc_camera_g_chip_ident(struct file *file, void *fh,
-				   struct v4l2_dbg_chip_ident *id)
-{
-	struct soc_camera_device *icd = file->private_data;
-	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-
-	return v4l2_subdev_call(sd, core, g_chip_ident, id);
-}
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int soc_camera_g_register(struct file *file, void *fh,
-				 struct v4l2_dbg_register *reg)
-{
-	struct soc_camera_device *icd = file->private_data;
-	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-
-	return v4l2_subdev_call(sd, core, g_register, reg);
-}
-
-static int soc_camera_s_register(struct file *file, void *fh,
-				 const struct v4l2_dbg_register *reg)
-{
-	struct soc_camera_device *icd = file->private_data;
-	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-
-	return v4l2_subdev_call(sd, core, s_register, reg);
-}
-#endif
-
 static int soc_camera_probe(struct soc_camera_device *icd);
 
 /* So far this function cannot fail */
@@ -1495,11 +1466,6 @@ static const struct v4l2_ioctl_ops soc_camera_ioctl_ops = {
 	.vidioc_s_selection	 = soc_camera_s_selection,
 	.vidioc_g_parm		 = soc_camera_g_parm,
 	.vidioc_s_parm		 = soc_camera_s_parm,
-	.vidioc_g_chip_ident     = soc_camera_g_chip_ident,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.vidioc_g_register	 = soc_camera_g_register,
-	.vidioc_s_register	 = soc_camera_s_register,
-#endif
 };
 
 static int video_dev_create(struct soc_camera_device *icd)
diff --git a/drivers/media/platform/via-camera.c b/drivers/media/platform/via-camera.c
index a794cd6c444..e3438277b80 100644
--- a/drivers/media/platform/via-camera.c
+++ b/drivers/media/platform/via-camera.c
@@ -17,7 +17,6 @@
 #include <linux/videodev2.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
-#include <media/v4l2-chip-ident.h>
 #include <media/v4l2-ctrls.h>
 #include <media/ov7670.h>
 #include <media/videobuf-dma-sg.h>
@@ -805,20 +804,6 @@ static const struct v4l2_file_operations viacam_fops = {
  * The long list of v4l2 ioctl ops
  */
 
-static int viacam_g_chip_ident(struct file *file, void *priv,
-		struct v4l2_dbg_chip_ident *ident)
-{
-	struct via_camera *cam = priv;
-
-	ident->ident = V4L2_IDENT_NONE;
-	ident->revision = 0;
-	if (v4l2_chip_match_host(&ident->match)) {
-		ident->ident = V4L2_IDENT_VIA_VX855;
-		return 0;
-	}
-	return sensor_call(cam, core, g_chip_ident, ident);
-}
-
 /*
  * Only one input.
  */
@@ -1174,7 +1159,6 @@ static int viacam_enum_frameintervals(struct file *filp, void *priv,
 
 
 static const struct v4l2_ioctl_ops viacam_ioctl_ops = {
-	.vidioc_g_chip_ident	= viacam_g_chip_ident,
 	.vidioc_enum_input	= viacam_enum_input,
 	.vidioc_g_input		= viacam_g_input,
 	.vidioc_s_input		= viacam_s_input,
diff --git a/drivers/media/radio/radio-si476x.c b/drivers/media/radio/radio-si476x.c
index 9430c6a2993..e039d033283 100644
--- a/drivers/media/radio/radio-si476x.c
+++ b/drivers/media/radio/radio-si476x.c
@@ -1018,16 +1018,6 @@ static int si476x_radio_s_ctrl(struct v4l2_ctrl *ctrl)
 	return retval;
 }
 
-static int si476x_radio_g_chip_ident(struct file *file, void *fh,
-				     struct v4l2_dbg_chip_ident *chip)
-{
-	if (chip->match.type == V4L2_CHIP_MATCH_HOST &&
-	    v4l2_chip_match_host(&chip->match))
-		return 0;
-	return -EINVAL;
-}
-
-
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 static int si476x_radio_g_register(struct file *file, void *fh,
 				   struct v4l2_dbg_register *reg)
@@ -1203,7 +1193,6 @@ static const struct v4l2_ioctl_ops si4761_ioctl_ops = {
 	.vidioc_subscribe_event		= v4l2_ctrl_subscribe_event,
 	.vidioc_unsubscribe_event	= v4l2_event_unsubscribe,
 
-	.vidioc_g_chip_ident		= si476x_radio_g_chip_ident,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.vidioc_g_register		= si476x_radio_g_register,
 	.vidioc_s_register		= si476x_radio_s_register,
diff --git a/drivers/media/usb/au0828/au0828-video.c b/drivers/media/usb/au0828/au0828-video.c
index 75ac9947cda..4944a365570 100644
--- a/drivers/media/usb/au0828/au0828-video.c
+++ b/drivers/media/usb/au0828/au0828-video.c
@@ -36,7 +36,6 @@
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-event.h>
-#include <media/v4l2-chip-ident.h>
 #include <media/tuner.h>
 #include "au0828.h"
 #include "au0828-reg.h"
@@ -1638,26 +1637,6 @@ static int vidioc_g_fmt_vbi_cap(struct file *file, void *priv,
 	return 0;
 }
 
-static int vidioc_g_chip_ident(struct file *file, void *priv,
-	       struct v4l2_dbg_chip_ident *chip)
-{
-	struct au0828_fh *fh = priv;
-	struct au0828_dev *dev = fh->dev;
-	chip->ident = V4L2_IDENT_NONE;
-	chip->revision = 0;
-
-	if (v4l2_chip_match_host(&chip->match)) {
-		chip->ident = V4L2_IDENT_AU0828;
-		return 0;
-	}
-
-	v4l2_device_call_all(&dev->v4l2_dev, 0, core, g_chip_ident, chip);
-	if (chip->ident == V4L2_IDENT_NONE)
-		return -EINVAL;
-
-	return 0;
-}
-
 static int vidioc_cropcap(struct file *file, void *priv,
 			  struct v4l2_cropcap *cc)
 {
@@ -1779,15 +1758,6 @@ static int vidioc_g_register(struct file *file, void *priv,
 	struct au0828_fh *fh = priv;
 	struct au0828_dev *dev = fh->dev;
 
-	switch (reg->match.type) {
-	case V4L2_CHIP_MATCH_I2C_DRIVER:
-		v4l2_device_call_all(&dev->v4l2_dev, 0, core, g_register, reg);
-		return 0;
-	default:
-		if (!v4l2_chip_match_host(&reg->match))
-			return -EINVAL;
-	}
-
 	reg->val = au0828_read(dev, reg->reg);
 	return 0;
 }
@@ -1798,14 +1768,6 @@ static int vidioc_s_register(struct file *file, void *priv,
 	struct au0828_fh *fh = priv;
 	struct au0828_dev *dev = fh->dev;
 
-	switch (reg->match.type) {
-	case V4L2_CHIP_MATCH_I2C_DRIVER:
-		v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_register, reg);
-		return 0;
-	default:
-		if (!v4l2_chip_match_host(&reg->match))
-			return -EINVAL;
-	}
 	return au0828_writereg(dev, reg->reg, reg->val);
 }
 #endif
@@ -1943,7 +1905,6 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
 	.vidioc_g_register          = vidioc_g_register,
 	.vidioc_s_register          = vidioc_s_register,
 #endif
-	.vidioc_g_chip_ident        = vidioc_g_chip_ident,
 	.vidioc_log_status	    = vidioc_log_status,
 	.vidioc_subscribe_event     = v4l2_ctrl_subscribe_event,
 	.vidioc_unsubscribe_event   = v4l2_event_unsubscribe,
diff --git a/drivers/media/usb/em28xx/em28xx-video.c b/drivers/media/usb/em28xx/em28xx-video.c
index 32d60e5546b..1a577ed8ea0 100644
--- a/drivers/media/usb/em28xx/em28xx-video.c
+++ b/drivers/media/usb/em28xx/em28xx-video.c
@@ -41,7 +41,6 @@
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-event.h>
-#include <media/v4l2-chip-ident.h>
 #include <media/msp3400.h>
 #include <media/tuner.h>
 
@@ -1309,28 +1308,6 @@ static int vidioc_s_frequency(struct file *file, void *priv,
 	return 0;
 }
 
-static int vidioc_g_chip_ident(struct file *file, void *priv,
-	       struct v4l2_dbg_chip_ident *chip)
-{
-	struct em28xx_fh      *fh  = priv;
-	struct em28xx         *dev = fh->dev;
-
-	chip->ident = V4L2_IDENT_NONE;
-	chip->revision = 0;
-	if (chip->match.type == V4L2_CHIP_MATCH_BRIDGE) {
-		if (chip->match.addr > 1)
-			return -EINVAL;
-		return 0;
-	}
-	if (chip->match.type != V4L2_CHIP_MATCH_I2C_DRIVER &&
-	    chip->match.type != V4L2_CHIP_MATCH_I2C_ADDR)
-		return -EINVAL;
-
-	v4l2_device_call_all(&dev->v4l2_dev, 0, core, g_chip_ident, chip);
-
-	return 0;
-}
-
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 static int vidioc_g_chip_info(struct file *file, void *priv,
 	       struct v4l2_dbg_chip_info *chip)
@@ -1366,14 +1343,9 @@ static int vidioc_g_register(struct file *file, void *priv,
 	struct em28xx         *dev = fh->dev;
 	int ret;
 
-	switch (reg->match.type) {
-	case V4L2_CHIP_MATCH_BRIDGE:
-		if (reg->match.addr > 1)
-			return -EINVAL;
-		if (!reg->match.addr)
-			break;
-		/* fall-through */
-	case V4L2_CHIP_MATCH_AC97:
+	if (reg->match.addr > 1)
+		return -EINVAL;
+	if (reg->match.addr) {
 		ret = em28xx_read_ac97(dev, reg->reg);
 		if (ret < 0)
 			return ret;
@@ -1381,15 +1353,6 @@ static int vidioc_g_register(struct file *file, void *priv,
 		reg->val = ret;
 		reg->size = 1;
 		return 0;
-	case V4L2_CHIP_MATCH_I2C_DRIVER:
-		v4l2_device_call_all(&dev->v4l2_dev, 0, core, g_register, reg);
-		return 0;
-	case V4L2_CHIP_MATCH_I2C_ADDR:
-		/* TODO: is this correct? */
-		v4l2_device_call_all(&dev->v4l2_dev, 0, core, g_register, reg);
-		return 0;
-	default:
-		return -EINVAL;
 	}
 
 	/* Match host */
@@ -1421,25 +1384,10 @@ static int vidioc_s_register(struct file *file, void *priv,
 	struct em28xx         *dev = fh->dev;
 	__le16 buf;
 
-	switch (reg->match.type) {
-	case V4L2_CHIP_MATCH_BRIDGE:
-		if (reg->match.addr > 1)
-			return -EINVAL;
-		if (!reg->match.addr)
-			break;
-		/* fall-through */
-	case V4L2_CHIP_MATCH_AC97:
-		return em28xx_write_ac97(dev, reg->reg, reg->val);
-	case V4L2_CHIP_MATCH_I2C_DRIVER:
-		v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_register, reg);
-		return 0;
-	case V4L2_CHIP_MATCH_I2C_ADDR:
-		/* TODO: is this correct? */
-		v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_register, reg);
-		return 0;
-	default:
+	if (reg->match.addr > 1)
 		return -EINVAL;
-	}
+	if (reg->match.addr)
+		return em28xx_write_ac97(dev, reg->reg, reg->val);
 
 	/* Match host */
 	buf = cpu_to_le16(reg->val);
@@ -1795,7 +1743,6 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
 	.vidioc_s_frequency         = vidioc_s_frequency,
 	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
 	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
-	.vidioc_g_chip_ident        = vidioc_g_chip_ident,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.vidioc_g_chip_info         = vidioc_g_chip_info,
 	.vidioc_g_register          = vidioc_g_register,
@@ -1826,7 +1773,6 @@ static const struct v4l2_ioctl_ops radio_ioctl_ops = {
 	.vidioc_s_frequency   = vidioc_s_frequency,
 	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
 	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
-	.vidioc_g_chip_ident  = vidioc_g_chip_ident,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.vidioc_g_chip_info   = vidioc_g_chip_info,
 	.vidioc_g_register    = vidioc_g_register,
diff --git a/drivers/media/usb/stk1160/stk1160-v4l.c b/drivers/media/usb/stk1160/stk1160-v4l.c
index a59153d2f8b..876fc26565e 100644
--- a/drivers/media/usb/stk1160/stk1160-v4l.c
+++ b/drivers/media/usb/stk1160/stk1160-v4l.c
@@ -31,7 +31,6 @@
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-fh.h>
 #include <media/v4l2-event.h>
-#include <media/v4l2-chip-ident.h>
 #include <media/videobuf2-vmalloc.h>
 
 #include <media/saa7115.h>
@@ -454,19 +453,6 @@ static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
 	return 0;
 }
 
-static int vidioc_g_chip_ident(struct file *file, void *priv,
-	       struct v4l2_dbg_chip_ident *chip)
-{
-	switch (chip->match.type) {
-	case V4L2_CHIP_MATCH_BRIDGE:
-		chip->ident = V4L2_IDENT_NONE;
-		chip->revision = 0;
-		return 0;
-	default:
-		return -EINVAL;
-	}
-}
-
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 static int vidioc_g_register(struct file *file, void *priv,
 			     struct v4l2_dbg_register *reg)
@@ -475,19 +461,6 @@ static int vidioc_g_register(struct file *file, void *priv,
 	int rc;
 	u8 val;
 
-	switch (reg->match.type) {
-	case V4L2_CHIP_MATCH_I2C_DRIVER:
-		v4l2_device_call_all(&dev->v4l2_dev, 0, core, g_register, reg);
-		return 0;
-	case V4L2_CHIP_MATCH_I2C_ADDR:
-		/* TODO: is this correct? */
-		v4l2_device_call_all(&dev->v4l2_dev, 0, core, g_register, reg);
-		return 0;
-	default:
-		if (!v4l2_chip_match_host(&reg->match))
-			return -EINVAL;
-	}
-
 	/* Match host */
 	rc = stk1160_read_reg(dev, reg->reg, &val);
 	reg->val = val;
@@ -501,19 +474,6 @@ static int vidioc_s_register(struct file *file, void *priv,
 {
 	struct stk1160 *dev = video_drvdata(file);
 
-	switch (reg->match.type) {
-	case V4L2_CHIP_MATCH_I2C_DRIVER:
-		v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_register, reg);
-		return 0;
-	case V4L2_CHIP_MATCH_I2C_ADDR:
-		/* TODO: is this correct? */
-		v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_register, reg);
-		return 0;
-	default:
-		if (!v4l2_chip_match_host(&reg->match))
-			return -EINVAL;
-	}
-
 	/* Match host */
 	return stk1160_write_reg(dev, reg->reg, cpu_to_le16(reg->val));
 }
@@ -543,7 +503,6 @@ static const struct v4l2_ioctl_ops stk1160_ioctl_ops = {
 	.vidioc_log_status  = v4l2_ctrl_log_status,
 	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
 	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
-	.vidioc_g_chip_ident = vidioc_g_chip_ident,
 
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.vidioc_g_register = vidioc_g_register,
-- 
cgit v1.2.3-70-g09d2


From b1c85cc049a681aee805311faa56fd21b44fb904 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hans.verkuil@cisco.com>
Date: Wed, 29 May 2013 06:59:42 -0300
Subject: [media] gspca: remove g_chip_ident

Remove g_chip_ident and replace it with g_chip_info.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/gspca/gspca.c   | 32 +++++++++----------
 drivers/media/usb/gspca/gspca.h   |  6 ++--
 drivers/media/usb/gspca/pac7302.c | 19 +----------
 drivers/media/usb/gspca/sn9c20x.c | 67 +++++++++------------------------------
 4 files changed, 34 insertions(+), 90 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/gspca/gspca.c b/drivers/media/usb/gspca/gspca.c
index 5995ec4de6b..b7ae8721b84 100644
--- a/drivers/media/usb/gspca/gspca.c
+++ b/drivers/media/usb/gspca/gspca.c
@@ -1029,33 +1029,35 @@ static int gspca_get_mode(struct gspca_dev *gspca_dev,
 }
 
 #ifdef CONFIG_VIDEO_ADV_DEBUG
-static int vidioc_g_register(struct file *file, void *priv,
-			struct v4l2_dbg_register *reg)
+static int vidioc_g_chip_info(struct file *file, void *priv,
+				struct v4l2_dbg_chip_info *chip)
 {
 	struct gspca_dev *gspca_dev = video_drvdata(file);
 
 	gspca_dev->usb_err = 0;
-	return gspca_dev->sd_desc->get_register(gspca_dev, reg);
+	if (gspca_dev->sd_desc->get_chip_info)
+		return gspca_dev->sd_desc->get_chip_info(gspca_dev, chip);
+	return chip->match.addr ? -EINVAL : 0;
 }
 
-static int vidioc_s_register(struct file *file, void *priv,
-			const struct v4l2_dbg_register *reg)
+static int vidioc_g_register(struct file *file, void *priv,
+		struct v4l2_dbg_register *reg)
 {
 	struct gspca_dev *gspca_dev = video_drvdata(file);
 
 	gspca_dev->usb_err = 0;
-	return gspca_dev->sd_desc->set_register(gspca_dev, reg);
+	return gspca_dev->sd_desc->get_register(gspca_dev, reg);
 }
-#endif
 
-static int vidioc_g_chip_ident(struct file *file, void *priv,
-			struct v4l2_dbg_chip_ident *chip)
+static int vidioc_s_register(struct file *file, void *priv,
+		const struct v4l2_dbg_register *reg)
 {
 	struct gspca_dev *gspca_dev = video_drvdata(file);
 
 	gspca_dev->usb_err = 0;
-	return gspca_dev->sd_desc->get_chip_ident(gspca_dev, chip);
+	return gspca_dev->sd_desc->set_register(gspca_dev, reg);
 }
+#endif
 
 static int vidioc_enum_fmt_vid_cap(struct file *file, void  *priv,
 				struct v4l2_fmtdesc *fmtdesc)
@@ -1974,10 +1976,10 @@ static const struct v4l2_ioctl_ops dev_ioctl_ops = {
 	.vidioc_enum_framesizes = vidioc_enum_framesizes,
 	.vidioc_enum_frameintervals = vidioc_enum_frameintervals,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
+	.vidioc_g_chip_info	= vidioc_g_chip_info,
 	.vidioc_g_register	= vidioc_g_register,
 	.vidioc_s_register	= vidioc_s_register,
 #endif
-	.vidioc_g_chip_ident	= vidioc_g_chip_ident,
 	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
 	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
 };
@@ -2086,14 +2088,10 @@ int gspca_dev_probe2(struct usb_interface *intf,
 	v4l2_disable_ioctl_locking(&gspca_dev->vdev, VIDIOC_DQBUF);
 	v4l2_disable_ioctl_locking(&gspca_dev->vdev, VIDIOC_QBUF);
 	v4l2_disable_ioctl_locking(&gspca_dev->vdev, VIDIOC_QUERYBUF);
-	if (!gspca_dev->sd_desc->get_chip_ident)
-		v4l2_disable_ioctl(&gspca_dev->vdev, VIDIOC_DBG_G_CHIP_IDENT);
 #ifdef CONFIG_VIDEO_ADV_DEBUG
-	if (!gspca_dev->sd_desc->get_chip_ident ||
-	    !gspca_dev->sd_desc->get_register)
+	if (!gspca_dev->sd_desc->get_register)
 		v4l2_disable_ioctl(&gspca_dev->vdev, VIDIOC_DBG_G_REGISTER);
-	if (!gspca_dev->sd_desc->get_chip_ident ||
-	    !gspca_dev->sd_desc->set_register)
+	if (!gspca_dev->sd_desc->set_register)
 		v4l2_disable_ioctl(&gspca_dev->vdev, VIDIOC_DBG_S_REGISTER);
 #endif
 	if (!gspca_dev->sd_desc->get_jcomp)
diff --git a/drivers/media/usb/gspca/gspca.h b/drivers/media/usb/gspca/gspca.h
index ef8efeb8007..ac0b11f46f5 100644
--- a/drivers/media/usb/gspca/gspca.h
+++ b/drivers/media/usb/gspca/gspca.h
@@ -78,8 +78,8 @@ typedef int (*cam_get_reg_op) (struct gspca_dev *,
 				struct v4l2_dbg_register *);
 typedef int (*cam_set_reg_op) (struct gspca_dev *,
 				const struct v4l2_dbg_register *);
-typedef int (*cam_ident_op) (struct gspca_dev *,
-				struct v4l2_dbg_chip_ident *);
+typedef int (*cam_chip_info_op) (struct gspca_dev *,
+				struct v4l2_dbg_chip_info *);
 typedef void (*cam_streamparm_op) (struct gspca_dev *,
 				  struct v4l2_streamparm *);
 typedef void (*cam_pkt_op) (struct gspca_dev *gspca_dev,
@@ -112,8 +112,8 @@ struct sd_desc {
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	cam_set_reg_op set_register;
 	cam_get_reg_op get_register;
+	cam_chip_info_op get_chip_info;
 #endif
-	cam_ident_op get_chip_ident;
 #if IS_ENABLED(CONFIG_INPUT)
 	cam_int_pkt_op int_pkt_scan;
 	/* other_input makes the gspca core create gspca_dev->input even when
diff --git a/drivers/media/usb/gspca/pac7302.c b/drivers/media/usb/gspca/pac7302.c
index 6008c8d546a..a9150964356 100644
--- a/drivers/media/usb/gspca/pac7302.c
+++ b/drivers/media/usb/gspca/pac7302.c
@@ -93,7 +93,6 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/input.h>
-#include <media/v4l2-chip-ident.h>
 #include "gspca.h"
 /* Include pac common sof detection functions */
 #include "pac_common.h"
@@ -849,8 +848,7 @@ static int sd_dbg_s_register(struct gspca_dev *gspca_dev,
 	 * reg->reg: bit0..15: reserved for register index (wIndex is 16bit
 	 *		       long on the USB bus)
 	 */
-	if (reg->match.type == V4L2_CHIP_MATCH_HOST &&
-	    reg->match.addr == 0 &&
+	if (reg->match.addr == 0 &&
 	    (reg->reg < 0x000000ff) &&
 	    (reg->val <= 0x000000ff)
 	) {
@@ -871,20 +869,6 @@ static int sd_dbg_s_register(struct gspca_dev *gspca_dev,
 	}
 	return gspca_dev->usb_err;
 }
-
-static int sd_chip_ident(struct gspca_dev *gspca_dev,
-			struct v4l2_dbg_chip_ident *chip)
-{
-	int ret = -EINVAL;
-
-	if (chip->match.type == V4L2_CHIP_MATCH_HOST &&
-	    chip->match.addr == 0) {
-		chip->revision = 0;
-		chip->ident = V4L2_IDENT_UNKNOWN;
-		ret = 0;
-	}
-	return ret;
-}
 #endif
 
 #if IS_ENABLED(CONFIG_INPUT)
@@ -931,7 +915,6 @@ static const struct sd_desc sd_desc = {
 	.dq_callback = do_autogain,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.set_register = sd_dbg_s_register,
-	.get_chip_ident = sd_chip_ident,
 #endif
 #if IS_ENABLED(CONFIG_INPUT)
 	.int_pkt_scan = sd_int_pkt_scan,
diff --git a/drivers/media/usb/gspca/sn9c20x.c b/drivers/media/usb/gspca/sn9c20x.c
index ead9a1f5851..23b71f9f594 100644
--- a/drivers/media/usb/gspca/sn9c20x.c
+++ b/drivers/media/usb/gspca/sn9c20x.c
@@ -27,7 +27,6 @@
 #include "gspca.h"
 #include "jpeg.h"
 
-#include <media/v4l2-chip-ident.h>
 #include <linux/dmi.h>
 
 MODULE_AUTHOR("Brian Johnson <brijohn@gmail.com>, "
@@ -582,22 +581,6 @@ static const s16 hsv_blue_y[] = {
 	4,   2,   0,  -1,  -3,  -5,  -7,  -9, -11
 };
 
-static const u16 i2c_ident[] = {
-	V4L2_IDENT_OV9650,
-	V4L2_IDENT_OV9655,
-	V4L2_IDENT_SOI968,
-	V4L2_IDENT_OV7660,
-	V4L2_IDENT_OV7670,
-	V4L2_IDENT_MT9V011,
-	V4L2_IDENT_MT9V111,
-	V4L2_IDENT_MT9V112,
-	V4L2_IDENT_MT9M001C12ST,
-	V4L2_IDENT_MT9M111,
-	V4L2_IDENT_MT9M112,
-	V4L2_IDENT_HV7131R,
-[SENSOR_MT9VPRB] = V4L2_IDENT_UNKNOWN,
-};
-
 static const u16 bridge_init[][2] = {
 	{0x1000, 0x78}, {0x1001, 0x40}, {0x1002, 0x1c},
 	{0x1020, 0x80}, {0x1061, 0x01}, {0x1067, 0x40},
@@ -1574,18 +1557,14 @@ static int sd_dbg_g_register(struct gspca_dev *gspca_dev,
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	switch (reg->match.type) {
-	case V4L2_CHIP_MATCH_HOST:
-		if (reg->match.addr != 0)
-			return -EINVAL;
+	switch (reg->match.addr) {
+	case 0:
 		if (reg->reg < 0x1000 || reg->reg > 0x11ff)
 			return -EINVAL;
 		reg_r(gspca_dev, reg->reg, 1);
 		reg->val = gspca_dev->usb_buf[0];
 		return gspca_dev->usb_err;
-	case V4L2_CHIP_MATCH_I2C_ADDR:
-		if (reg->match.addr != sd->i2c_addr)
-			return -EINVAL;
+	case 1:
 		if (sd->sensor >= SENSOR_MT9V011 &&
 		    sd->sensor <= SENSOR_MT9M112) {
 			i2c_r2(gspca_dev, reg->reg, (u16 *) &reg->val);
@@ -1602,17 +1581,13 @@ static int sd_dbg_s_register(struct gspca_dev *gspca_dev,
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	switch (reg->match.type) {
-	case V4L2_CHIP_MATCH_HOST:
-		if (reg->match.addr != 0)
-			return -EINVAL;
+	switch (reg->match.addr) {
+	case 0:
 		if (reg->reg < 0x1000 || reg->reg > 0x11ff)
 			return -EINVAL;
 		reg_w1(gspca_dev, reg->reg, reg->val);
 		return gspca_dev->usb_err;
-	case V4L2_CHIP_MATCH_I2C_ADDR:
-		if (reg->match.addr != sd->i2c_addr)
-			return -EINVAL;
+	case 1:
 		if (sd->sensor >= SENSOR_MT9V011 &&
 		    sd->sensor <= SENSOR_MT9M112) {
 			i2c_w2(gspca_dev, reg->reg, reg->val);
@@ -1623,29 +1598,17 @@ static int sd_dbg_s_register(struct gspca_dev *gspca_dev,
 	}
 	return -EINVAL;
 }
-#endif
 
-static int sd_chip_ident(struct gspca_dev *gspca_dev,
-			struct v4l2_dbg_chip_ident *chip)
+static int sd_chip_info(struct gspca_dev *gspca_dev,
+			struct v4l2_dbg_chip_info *chip)
 {
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	switch (chip->match.type) {
-	case V4L2_CHIP_MATCH_HOST:
-		if (chip->match.addr != 0)
-			return -EINVAL;
-		chip->revision = 0;
-		chip->ident = V4L2_IDENT_SN9C20X;
-		return 0;
-	case V4L2_CHIP_MATCH_I2C_ADDR:
-		if (chip->match.addr != sd->i2c_addr)
-			return -EINVAL;
-		chip->revision = 0;
-		chip->ident = i2c_ident[sd->sensor];
-		return 0;
-	}
-	return -EINVAL;
+	if (chip->match.addr > 1)
+		return -EINVAL;
+	if (chip->match.addr == 1)
+		strlcpy(chip->name, "sensor", sizeof(chip->name));
+	return 0;
 }
+#endif
 
 static int sd_config(struct gspca_dev *gspca_dev,
 			const struct usb_device_id *id)
@@ -2356,8 +2319,8 @@ static const struct sd_desc sd_desc = {
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.set_register = sd_dbg_s_register,
 	.get_register = sd_dbg_g_register,
+	.get_chip_info = sd_chip_info,
 #endif
-	.get_chip_ident = sd_chip_ident,
 };
 
 #define SN9C20X(sensor, i2c_addr, flags) \
-- 
cgit v1.2.3-70-g09d2


From 08fe9f7ddf31b8c42dd1a689b0a2c1501f10b58c Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hans.verkuil@cisco.com>
Date: Wed, 29 May 2013 06:59:43 -0300
Subject: [media] cx231xx: remove g_chip_ident

Remove g_chip_ident and replace it with g_chip_info.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/cx231xx/cx231xx-417.c    |   1 -
 drivers/media/usb/cx231xx/cx231xx-avcore.c |   1 -
 drivers/media/usb/cx231xx/cx231xx-cards.c  |   1 -
 drivers/media/usb/cx231xx/cx231xx-vbi.c    |   1 -
 drivers/media/usb/cx231xx/cx231xx-video.c  | 417 +++++++----------------------
 drivers/media/usb/cx231xx/cx231xx.h        |   2 +-
 6 files changed, 103 insertions(+), 320 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/cx231xx/cx231xx-417.c b/drivers/media/usb/cx231xx/cx231xx-417.c
index f548db8043d..2f63029e7a3 100644
--- a/drivers/media/usb/cx231xx/cx231xx-417.c
+++ b/drivers/media/usb/cx231xx/cx231xx-417.c
@@ -1840,7 +1840,6 @@ static const struct v4l2_ioctl_ops mpeg_ioctl_ops = {
 	.vidioc_streamon	 = vidioc_streamon,
 	.vidioc_streamoff	 = vidioc_streamoff,
 	.vidioc_log_status	 = vidioc_log_status,
-	.vidioc_g_chip_ident	 = cx231xx_g_chip_ident,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.vidioc_g_register	 = cx231xx_g_register,
 	.vidioc_s_register	 = cx231xx_s_register,
diff --git a/drivers/media/usb/cx231xx/cx231xx-avcore.c b/drivers/media/usb/cx231xx/cx231xx-avcore.c
index 235ba657d52..89de00bf4f8 100644
--- a/drivers/media/usb/cx231xx/cx231xx-avcore.c
+++ b/drivers/media/usb/cx231xx/cx231xx-avcore.c
@@ -35,7 +35,6 @@
 
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
-#include <media/v4l2-chip-ident.h>
 
 #include "cx231xx.h"
 #include "cx231xx-dif.h"
diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c
index 13249e5a789..27948e1798e 100644
--- a/drivers/media/usb/cx231xx/cx231xx-cards.c
+++ b/drivers/media/usb/cx231xx/cx231xx-cards.c
@@ -29,7 +29,6 @@
 #include <media/tuner.h>
 #include <media/tveeprom.h>
 #include <media/v4l2-common.h>
-#include <media/v4l2-chip-ident.h>
 
 #include <media/cx25840.h>
 #include "dvb-usb-ids.h"
diff --git a/drivers/media/usb/cx231xx/cx231xx-vbi.c b/drivers/media/usb/cx231xx/cx231xx-vbi.c
index 1340ff26881..c02794274f5 100644
--- a/drivers/media/usb/cx231xx/cx231xx-vbi.c
+++ b/drivers/media/usb/cx231xx/cx231xx-vbi.c
@@ -32,7 +32,6 @@
 
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
-#include <media/v4l2-chip-ident.h>
 #include <media/msp3400.h>
 #include <media/tuner.h>
 
diff --git a/drivers/media/usb/cx231xx/cx231xx-video.c b/drivers/media/usb/cx231xx/cx231xx-video.c
index cd221474e1b..54cdd4dc455 100644
--- a/drivers/media/usb/cx231xx/cx231xx-video.c
+++ b/drivers/media/usb/cx231xx/cx231xx-video.c
@@ -36,7 +36,6 @@
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-event.h>
-#include <media/v4l2-chip-ident.h>
 #include <media/msp3400.h>
 #include <media/tuner.h>
 
@@ -1228,179 +1227,86 @@ int cx231xx_s_frequency(struct file *file, void *priv,
 	return rc;
 }
 
-int cx231xx_g_chip_ident(struct file *file, void *fh,
-			struct v4l2_dbg_chip_ident *chip)
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+
+int cx231xx_g_chip_info(struct file *file, void *fh,
+			struct v4l2_dbg_chip_info *chip)
 {
-	chip->ident = V4L2_IDENT_NONE;
-	chip->revision = 0;
-	if (chip->match.type == V4L2_CHIP_MATCH_HOST) {
-		if (v4l2_chip_match_host(&chip->match))
-			chip->ident = V4L2_IDENT_CX23100;
+	switch (chip->match.addr) {
+	case 0:	/* Cx231xx - internal registers */
+		return 0;
+	case 1:	/* AFE - read byte */
+		strlcpy(chip->name, "AFE (byte)", sizeof(chip->name));
+		return 0;
+	case 2:	/* Video Block - read byte */
+		strlcpy(chip->name, "Video (byte)", sizeof(chip->name));
+		return 0;
+	case 3:	/* I2S block - read byte */
+		strlcpy(chip->name, "I2S (byte)", sizeof(chip->name));
+		return 0;
+	case 4: /* AFE - read dword */
+		strlcpy(chip->name, "AFE (dword)", sizeof(chip->name));
+		return 0;
+	case 5: /* Video Block - read dword */
+		strlcpy(chip->name, "Video (dword)", sizeof(chip->name));
+		return 0;
+	case 6: /* I2S Block - read dword */
+		strlcpy(chip->name, "I2S (dword)", sizeof(chip->name));
 		return 0;
 	}
 	return -EINVAL;
 }
 
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-
-/*
-  -R, --list-registers=type=<host/i2cdrv/i2caddr>,
-				chip=<chip>[,min=<addr>,max=<addr>]
-		     dump registers from <min> to <max> [VIDIOC_DBG_G_REGISTER]
-  -r, --set-register=type=<host/i2cdrv/i2caddr>,
-				chip=<chip>,reg=<addr>,val=<val>
-		     set the register [VIDIOC_DBG_S_REGISTER]
-
-  if type == host, then <chip> is the hosts chip ID (default 0)
-  if type == i2cdrv (default), then <chip> is the I2C driver name or ID
-  if type == i2caddr, then <chip> is the 7-bit I2C address
-*/
-
 int cx231xx_g_register(struct file *file, void *priv,
 			     struct v4l2_dbg_register *reg)
 {
 	struct cx231xx_fh *fh = priv;
 	struct cx231xx *dev = fh->dev;
-	int ret = 0;
+	int ret;
 	u8 value[4] = { 0, 0, 0, 0 };
 	u32 data = 0;
 
-	switch (reg->match.type) {
-	case V4L2_CHIP_MATCH_HOST:
-		switch (reg->match.addr) {
-		case 0:	/* Cx231xx - internal registers */
-			ret = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER,
-						  (u16)reg->reg, value, 4);
-			reg->val = value[0] | value[1] << 8 |
-				   value[2] << 16 | value[3] << 24;
-			break;
-		case 1:	/* AFE - read byte */
-			ret = cx231xx_read_i2c_data(dev, AFE_DEVICE_ADDRESS,
-						  (u16)reg->reg, 2, &data, 1);
-			reg->val = le32_to_cpu(data & 0xff);
-			break;
-		case 14: /* AFE - read dword */
-			ret = cx231xx_read_i2c_data(dev, AFE_DEVICE_ADDRESS,
-						  (u16)reg->reg, 2, &data, 4);
-			reg->val = le32_to_cpu(data);
-			break;
-		case 2:	/* Video Block - read byte */
-			ret = cx231xx_read_i2c_data(dev, VID_BLK_I2C_ADDRESS,
-						  (u16)reg->reg, 2, &data, 1);
-			reg->val = le32_to_cpu(data & 0xff);
-			break;
-		case 24: /* Video Block - read dword */
-			ret = cx231xx_read_i2c_data(dev, VID_BLK_I2C_ADDRESS,
-						  (u16)reg->reg, 2, &data, 4);
-			reg->val = le32_to_cpu(data);
-			break;
-		case 3:	/* I2S block - read byte */
-			ret = cx231xx_read_i2c_data(dev,
-						    I2S_BLK_DEVICE_ADDRESS,
-						    (u16)reg->reg, 1,
-						    &data, 1);
-			reg->val = le32_to_cpu(data & 0xff);
-			break;
-		case 34: /* I2S Block - read dword */
-			ret =
-			    cx231xx_read_i2c_data(dev, I2S_BLK_DEVICE_ADDRESS,
-						  (u16)reg->reg, 1, &data, 4);
-			reg->val = le32_to_cpu(data);
-			break;
-		}
-		return ret < 0 ? ret : 0;
-
-	case V4L2_CHIP_MATCH_I2C_DRIVER:
-		call_all(dev, core, g_register, reg);
-		return 0;
-	case V4L2_CHIP_MATCH_I2C_ADDR:/*for register debug*/
-		switch (reg->match.addr) {
-		case 0:	/* Cx231xx - internal registers */
-			ret = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER,
-						  (u16)reg->reg, value, 4);
-			reg->val = value[0] | value[1] << 8 |
-				   value[2] << 16 | value[3] << 24;
-
-			break;
-		case 0x600:/* AFE - read byte */
-			ret = cx231xx_read_i2c_master(dev, AFE_DEVICE_ADDRESS,
-						 (u16)reg->reg, 2,
-						 &data, 1 , 0);
-			reg->val = le32_to_cpu(data & 0xff);
-			break;
-
-		case 0x880:/* Video Block - read byte */
-			if (reg->reg < 0x0b) {
-				ret = cx231xx_read_i2c_master(dev,
-						VID_BLK_I2C_ADDRESS,
-						 (u16)reg->reg, 2,
-						 &data, 1 , 0);
-				reg->val = le32_to_cpu(data & 0xff);
-			} else {
-				ret = cx231xx_read_i2c_master(dev,
-						VID_BLK_I2C_ADDRESS,
-						 (u16)reg->reg, 2,
-						 &data, 4 , 0);
-				reg->val = le32_to_cpu(data);
-			}
-			break;
-		case 0x980:
-			ret = cx231xx_read_i2c_master(dev,
-						I2S_BLK_DEVICE_ADDRESS,
-						(u16)reg->reg, 1,
-						&data, 1 , 0);
-			reg->val = le32_to_cpu(data & 0xff);
-			break;
-		case 0x400:
-			ret =
-			    cx231xx_read_i2c_master(dev, 0x40,
-						  (u16)reg->reg, 1,
-						 &data, 1 , 0);
-			reg->val = le32_to_cpu(data & 0xff);
-			break;
-		case 0xc01:
-			ret =
-				cx231xx_read_i2c_master(dev, 0xc0,
-						(u16)reg->reg, 2,
-						 &data, 38, 1);
-			reg->val = le32_to_cpu(data);
-			break;
-		case 0x022:
-			ret =
-				cx231xx_read_i2c_master(dev, 0x02,
-						(u16)reg->reg, 1,
-						 &data, 1, 2);
-			reg->val = le32_to_cpu(data & 0xff);
-			break;
-		case 0x322:
-			ret = cx231xx_read_i2c_master(dev,
-						0x32,
-						 (u16)reg->reg, 1,
-						 &data, 4 , 2);
-				reg->val = le32_to_cpu(data);
-			break;
-		case 0x342:
-			ret = cx231xx_read_i2c_master(dev,
-						0x34,
-						 (u16)reg->reg, 1,
-						 &data, 4 , 2);
-				reg->val = le32_to_cpu(data);
-			break;
-
-		default:
-			cx231xx_info("no match device address!!\n");
-			break;
-			}
-		return ret < 0 ? ret : 0;
-		/*return -EINVAL;*/
+	switch (reg->match.addr) {
+	case 0:	/* Cx231xx - internal registers */
+		ret = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER,
+				(u16)reg->reg, value, 4);
+		reg->val = value[0] | value[1] << 8 |
+			value[2] << 16 | value[3] << 24;
+		break;
+	case 1:	/* AFE - read byte */
+		ret = cx231xx_read_i2c_data(dev, AFE_DEVICE_ADDRESS,
+				(u16)reg->reg, 2, &data, 1);
+		reg->val = data;
+		break;
+	case 2:	/* Video Block - read byte */
+		ret = cx231xx_read_i2c_data(dev, VID_BLK_I2C_ADDRESS,
+				(u16)reg->reg, 2, &data, 1);
+		reg->val = data;
+		break;
+	case 3:	/* I2S block - read byte */
+		ret = cx231xx_read_i2c_data(dev, I2S_BLK_DEVICE_ADDRESS,
+				(u16)reg->reg, 1, &data, 1);
+		reg->val = data;
+		break;
+	case 4: /* AFE - read dword */
+		ret = cx231xx_read_i2c_data(dev, AFE_DEVICE_ADDRESS,
+				(u16)reg->reg, 2, &data, 4);
+		reg->val = data;
+		break;
+	case 5: /* Video Block - read dword */
+		ret = cx231xx_read_i2c_data(dev, VID_BLK_I2C_ADDRESS,
+				(u16)reg->reg, 2, &data, 4);
+		reg->val = data;
+		break;
+	case 6: /* I2S Block - read dword */
+		ret = cx231xx_read_i2c_data(dev, I2S_BLK_DEVICE_ADDRESS,
+				(u16)reg->reg, 1, &data, 4);
+		reg->val = data;
+		break;
 	default:
-		if (!v4l2_chip_match_host(&reg->match))
-			return -EINVAL;
+		return -EINVAL;
 	}
-
-	call_all(dev, core, g_register, reg);
-
-	return ret;
+	return ret < 0 ? ret : 0;
 }
 
 int cx231xx_s_register(struct file *file, void *priv,
@@ -1408,165 +1314,46 @@ int cx231xx_s_register(struct file *file, void *priv,
 {
 	struct cx231xx_fh *fh = priv;
 	struct cx231xx *dev = fh->dev;
-	int ret = 0;
-	__le64 buf;
-	u32 value;
+	int ret;
 	u8 data[4] = { 0, 0, 0, 0 };
 
-	buf = cpu_to_le64(reg->val);
-
-	switch (reg->match.type) {
-	case V4L2_CHIP_MATCH_HOST:
-		{
-			value = (u32) buf & 0xffffffff;
-
-			switch (reg->match.addr) {
-			case 0:	/* cx231xx internal registers */
-				data[0] = (u8) value;
-				data[1] = (u8) (value >> 8);
-				data[2] = (u8) (value >> 16);
-				data[3] = (u8) (value >> 24);
-				ret = cx231xx_write_ctrl_reg(dev,
-							   VRT_SET_REGISTER,
-							   (u16)reg->reg, data,
-							   4);
-				break;
-			case 1:	/* AFE - read byte */
-				ret = cx231xx_write_i2c_data(dev,
-							AFE_DEVICE_ADDRESS,
-							(u16)reg->reg, 2,
-							value, 1);
-				break;
-			case 14: /* AFE - read dword */
-				ret = cx231xx_write_i2c_data(dev,
-							AFE_DEVICE_ADDRESS,
-							(u16)reg->reg, 2,
-							value, 4);
-				break;
-			case 2:	/* Video Block - read byte */
-				ret =
-				    cx231xx_write_i2c_data(dev,
-							VID_BLK_I2C_ADDRESS,
-							(u16)reg->reg, 2,
-							value, 1);
-				break;
-			case 24: /* Video Block - read dword */
-				ret =
-				    cx231xx_write_i2c_data(dev,
-							VID_BLK_I2C_ADDRESS,
-							(u16)reg->reg, 2,
-							value, 4);
-				break;
-			case 3:	/* I2S block - read byte */
-				ret =
-				    cx231xx_write_i2c_data(dev,
-							I2S_BLK_DEVICE_ADDRESS,
-							(u16)reg->reg, 1,
-							value, 1);
-				break;
-			case 34: /* I2S block - read dword */
-				ret =
-				    cx231xx_write_i2c_data(dev,
-							I2S_BLK_DEVICE_ADDRESS,
-							(u16)reg->reg, 1,
-							value, 4);
-				break;
-			}
-		}
-		return ret < 0 ? ret : 0;
-	case V4L2_CHIP_MATCH_I2C_ADDR:
-		{
-			value = (u32) buf & 0xffffffff;
-
-			switch (reg->match.addr) {
-			case 0:/*cx231xx internal registers*/
-					data[0] = (u8) value;
-					data[1] = (u8) (value >> 8);
-					data[2] = (u8) (value >> 16);
-					data[3] = (u8) (value >> 24);
-					ret = cx231xx_write_ctrl_reg(dev,
-							   VRT_SET_REGISTER,
-							   (u16)reg->reg, data,
-							   4);
-					break;
-			case 0x600:/* AFE - read byte */
-					ret = cx231xx_write_i2c_master(dev,
-							AFE_DEVICE_ADDRESS,
-							(u16)reg->reg, 2,
-							value, 1 , 0);
-					break;
-
-			case 0x880:/* Video Block - read byte */
-					if (reg->reg < 0x0b)
-						cx231xx_write_i2c_master(dev,
-							VID_BLK_I2C_ADDRESS,
-							(u16)reg->reg, 2,
-							value, 1, 0);
-					else
-						cx231xx_write_i2c_master(dev,
-							VID_BLK_I2C_ADDRESS,
-							(u16)reg->reg, 2,
-							value, 4, 0);
-					break;
-			case 0x980:
-					ret =
-						cx231xx_write_i2c_master(dev,
-							I2S_BLK_DEVICE_ADDRESS,
-							(u16)reg->reg, 1,
-							value, 1, 0);
-					break;
-			case 0x400:
-					ret =
-						cx231xx_write_i2c_master(dev,
-							0x40,
-							(u16)reg->reg, 1,
-							value, 1, 0);
-					break;
-			case 0xc01:
-					ret =
-						cx231xx_write_i2c_master(dev,
-							 0xc0,
-							 (u16)reg->reg, 1,
-							 value, 1, 1);
-					break;
-
-			case 0x022:
-					ret =
-						cx231xx_write_i2c_master(dev,
-							0x02,
-							(u16)reg->reg, 1,
-							value, 1, 2);
-					break;
-			case 0x322:
-					ret =
-						cx231xx_write_i2c_master(dev,
-							0x32,
-							(u16)reg->reg, 1,
-							value, 4, 2);
-					break;
-
-			case 0x342:
-					ret =
-						cx231xx_write_i2c_master(dev,
-							0x34,
-							(u16)reg->reg, 1,
-							value, 4, 2);
-					break;
-			default:
-				cx231xx_info("no match device address, "
-					"the value is %x\n", reg->match.addr);
-					break;
-
-					}
-
-		}
-	default:
+	switch (reg->match.addr) {
+	case 0:	/* cx231xx internal registers */
+		data[0] = (u8) reg->val;
+		data[1] = (u8) (reg->val >> 8);
+		data[2] = (u8) (reg->val >> 16);
+		data[3] = (u8) (reg->val >> 24);
+		ret = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
+				(u16)reg->reg, data, 4);
+		break;
+	case 1:	/* AFE - write byte */
+		ret = cx231xx_write_i2c_data(dev, AFE_DEVICE_ADDRESS,
+				(u16)reg->reg, 2, reg->val, 1);
+		break;
+	case 2:	/* Video Block - write byte */
+		ret = cx231xx_write_i2c_data(dev, VID_BLK_I2C_ADDRESS,
+				(u16)reg->reg, 2, reg->val, 1);
+		break;
+	case 3:	/* I2S block - write byte */
+		ret = cx231xx_write_i2c_data(dev, I2S_BLK_DEVICE_ADDRESS,
+				(u16)reg->reg, 1, reg->val, 1);
+		break;
+	case 4: /* AFE - write dword */
+		ret = cx231xx_write_i2c_data(dev, AFE_DEVICE_ADDRESS,
+				(u16)reg->reg, 2, reg->val, 4);
+		break;
+	case 5: /* Video Block - write dword */
+		ret = cx231xx_write_i2c_data(dev, VID_BLK_I2C_ADDRESS,
+				(u16)reg->reg, 2, reg->val, 4);
 		break;
+	case 6: /* I2S block - write dword */
+		ret = cx231xx_write_i2c_data(dev, I2S_BLK_DEVICE_ADDRESS,
+				(u16)reg->reg, 1, reg->val, 4);
+		break;
+	default:
+		return -EINVAL;
 	}
-
-	call_all(dev, core, s_register, reg);
-
-	return ret;
+	return ret < 0 ? ret : 0;
 }
 #endif
 
@@ -2208,8 +1995,8 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
 	.vidioc_s_tuner                = cx231xx_s_tuner,
 	.vidioc_g_frequency            = cx231xx_g_frequency,
 	.vidioc_s_frequency            = cx231xx_s_frequency,
-	.vidioc_g_chip_ident           = cx231xx_g_chip_ident,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
+	.vidioc_g_chip_info            = cx231xx_g_chip_info,
 	.vidioc_g_register             = cx231xx_g_register,
 	.vidioc_s_register             = cx231xx_s_register,
 #endif
@@ -2240,8 +2027,8 @@ static const struct v4l2_ioctl_ops radio_ioctl_ops = {
 	.vidioc_s_tuner     = radio_s_tuner,
 	.vidioc_g_frequency = cx231xx_g_frequency,
 	.vidioc_s_frequency = cx231xx_s_frequency,
-	.vidioc_g_chip_ident = cx231xx_g_chip_ident,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
+	.vidioc_g_chip_info = cx231xx_g_chip_info,
 	.vidioc_g_register  = cx231xx_g_register,
 	.vidioc_s_register  = cx231xx_s_register,
 #endif
diff --git a/drivers/media/usb/cx231xx/cx231xx.h b/drivers/media/usb/cx231xx/cx231xx.h
index 5ad9fd61d3c..e812119ea7a 100644
--- a/drivers/media/usb/cx231xx/cx231xx.h
+++ b/drivers/media/usb/cx231xx/cx231xx.h
@@ -945,7 +945,7 @@ int cx231xx_enum_input(struct file *file, void *priv,
 			     struct v4l2_input *i);
 int cx231xx_g_input(struct file *file, void *priv, unsigned int *i);
 int cx231xx_s_input(struct file *file, void *priv, unsigned int i);
-int cx231xx_g_chip_ident(struct file *file, void *fh, struct v4l2_dbg_chip_ident *chip);
+int cx231xx_g_chip_info(struct file *file, void *fh, struct v4l2_dbg_chip_info *chip);
 int cx231xx_g_register(struct file *file, void *priv,
 			     struct v4l2_dbg_register *reg);
 int cx231xx_s_register(struct file *file, void *priv,
-- 
cgit v1.2.3-70-g09d2


From 33001010013749886eca5b5645efd80006dd2e51 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hans.verkuil@cisco.com>
Date: Wed, 29 May 2013 06:59:45 -0300
Subject: [media] tveeprom: remove v4l2-chip-ident.h include

Replace the V4L2_IDENT_* usage with tveeprom-specific defines. This header
is deprecated, so those defines shouldn't be used anymore.
The em28xx driver is the only one that uses the tveeprom audio_processor
field, so that has been updated to use the new tveeprom AUDPROC define.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/common/tveeprom.c         | 142 +++++++++++++++-----------------
 drivers/media/usb/em28xx/em28xx-cards.c |   3 +-
 include/media/tveeprom.h                |  11 +++
 3 files changed, 78 insertions(+), 78 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/common/tveeprom.c b/drivers/media/common/tveeprom.c
index cc1e172dfec..c7dace671a9 100644
--- a/drivers/media/common/tveeprom.c
+++ b/drivers/media/common/tveeprom.c
@@ -40,7 +40,6 @@
 #include <media/tuner.h>
 #include <media/tveeprom.h>
 #include <media/v4l2-common.h>
-#include <media/v4l2-chip-ident.h>
 
 MODULE_DESCRIPTION("i2c Hauppauge eeprom decoder driver");
 MODULE_AUTHOR("John Klar");
@@ -67,13 +66,10 @@ MODULE_PARM_DESC(debug, "Debug level (0-1)");
  * The Hauppauge eeprom uses an 8bit field to determine which
  * tuner formats the tuner supports.
  */
-static struct HAUPPAUGE_TUNER_FMT
-{
+static const struct {
 	int	id;
-	char *name;
-}
-hauppauge_tuner_fmt[] =
-{
+	const char * const name;
+} hauppauge_tuner_fmt[] = {
 	{ V4L2_STD_UNKNOWN,                   " UNKNOWN" },
 	{ V4L2_STD_UNKNOWN,                   " FM" },
 	{ V4L2_STD_B|V4L2_STD_GH,             " PAL(B/G)" },
@@ -88,13 +84,10 @@ hauppauge_tuner_fmt[] =
    supplying this information. Note that many tuners where only used for
    testing and never made it to the outside world. So you will only see
    a subset in actual produced cards. */
-static struct HAUPPAUGE_TUNER
-{
+static const struct {
 	int  id;
-	char *name;
-}
-hauppauge_tuner[] =
-{
+	const char * const name;
+} hauppauge_tuner[] = {
 	/* 0-9 */
 	{ TUNER_ABSENT,			"None" },
 	{ TUNER_ABSENT,			"External" },
@@ -298,69 +291,66 @@ hauppauge_tuner[] =
 	{ TUNER_ABSENT,                 "NXP 18272S"},
 };
 
-/* Use V4L2_IDENT_AMBIGUOUS for those audio 'chips' that are
+/* Use TVEEPROM_AUDPROC_INTERNAL for those audio 'chips' that are
  * internal to a video chip, i.e. not a separate audio chip. */
-static struct HAUPPAUGE_AUDIOIC
-{
+static const struct {
 	u32   id;
-	char *name;
-}
-audioIC[] =
-{
+	const char * const name;
+} audio_ic[] = {
 	/* 0-4 */
-	{ V4L2_IDENT_NONE,      "None"      },
-	{ V4L2_IDENT_UNKNOWN,   "TEA6300"   },
-	{ V4L2_IDENT_UNKNOWN,   "TEA6320"   },
-	{ V4L2_IDENT_UNKNOWN,   "TDA9850"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP3400C"  },
+	{ TVEEPROM_AUDPROC_NONE,  "None"      },
+	{ TVEEPROM_AUDPROC_OTHER, "TEA6300"   },
+	{ TVEEPROM_AUDPROC_OTHER, "TEA6320"   },
+	{ TVEEPROM_AUDPROC_OTHER, "TDA9850"   },
+	{ TVEEPROM_AUDPROC_MSP,   "MSP3400C"  },
 	/* 5-9 */
-	{ V4L2_IDENT_MSPX4XX,   "MSP3410D"  },
-	{ V4L2_IDENT_MSPX4XX,   "MSP3415"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP3430"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP3438"   },
-	{ V4L2_IDENT_UNKNOWN,   "CS5331"    },
+	{ TVEEPROM_AUDPROC_MSP,   "MSP3410D"  },
+	{ TVEEPROM_AUDPROC_MSP,   "MSP3415"   },
+	{ TVEEPROM_AUDPROC_MSP,   "MSP3430"   },
+	{ TVEEPROM_AUDPROC_MSP,   "MSP3438"   },
+	{ TVEEPROM_AUDPROC_OTHER, "CS5331"    },
 	/* 10-14 */
-	{ V4L2_IDENT_MSPX4XX,   "MSP3435"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP3440"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP3445"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP3411"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP3416"   },
+	{ TVEEPROM_AUDPROC_MSP,   "MSP3435"   },
+	{ TVEEPROM_AUDPROC_MSP,   "MSP3440"   },
+	{ TVEEPROM_AUDPROC_MSP,   "MSP3445"   },
+	{ TVEEPROM_AUDPROC_MSP,   "MSP3411"   },
+	{ TVEEPROM_AUDPROC_MSP,   "MSP3416"   },
 	/* 15-19 */
-	{ V4L2_IDENT_MSPX4XX,   "MSP3425"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP3451"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP3418"   },
-	{ V4L2_IDENT_UNKNOWN,   "Type 0x12" },
-	{ V4L2_IDENT_UNKNOWN,   "OKI7716"   },
+	{ TVEEPROM_AUDPROC_MSP,   "MSP3425"   },
+	{ TVEEPROM_AUDPROC_MSP,   "MSP3451"   },
+	{ TVEEPROM_AUDPROC_MSP,   "MSP3418"   },
+	{ TVEEPROM_AUDPROC_OTHER, "Type 0x12" },
+	{ TVEEPROM_AUDPROC_OTHER, "OKI7716"   },
 	/* 20-24 */
-	{ V4L2_IDENT_MSPX4XX,   "MSP4410"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP4420"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP4440"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP4450"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP4408"   },
+	{ TVEEPROM_AUDPROC_MSP,   "MSP4410"   },
+	{ TVEEPROM_AUDPROC_MSP,   "MSP4420"   },
+	{ TVEEPROM_AUDPROC_MSP,   "MSP4440"   },
+	{ TVEEPROM_AUDPROC_MSP,   "MSP4450"   },
+	{ TVEEPROM_AUDPROC_MSP,   "MSP4408"   },
 	/* 25-29 */
-	{ V4L2_IDENT_MSPX4XX,   "MSP4418"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP4428"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP4448"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP4458"   },
-	{ V4L2_IDENT_MSPX4XX,   "Type 0x1d" },
+	{ TVEEPROM_AUDPROC_MSP,   "MSP4418"   },
+	{ TVEEPROM_AUDPROC_MSP,   "MSP4428"   },
+	{ TVEEPROM_AUDPROC_MSP,   "MSP4448"   },
+	{ TVEEPROM_AUDPROC_MSP,   "MSP4458"   },
+	{ TVEEPROM_AUDPROC_MSP,   "Type 0x1d" },
 	/* 30-34 */
-	{ V4L2_IDENT_AMBIGUOUS, "CX880"     },
-	{ V4L2_IDENT_AMBIGUOUS, "CX881"     },
-	{ V4L2_IDENT_AMBIGUOUS, "CX883"     },
-	{ V4L2_IDENT_AMBIGUOUS, "CX882"     },
-	{ V4L2_IDENT_AMBIGUOUS, "CX25840"   },
+	{ TVEEPROM_AUDPROC_INTERNAL, "CX880"     },
+	{ TVEEPROM_AUDPROC_INTERNAL, "CX881"     },
+	{ TVEEPROM_AUDPROC_INTERNAL, "CX883"     },
+	{ TVEEPROM_AUDPROC_INTERNAL, "CX882"     },
+	{ TVEEPROM_AUDPROC_INTERNAL, "CX25840"   },
 	/* 35-39 */
-	{ V4L2_IDENT_AMBIGUOUS, "CX25841"   },
-	{ V4L2_IDENT_AMBIGUOUS, "CX25842"   },
-	{ V4L2_IDENT_AMBIGUOUS, "CX25843"   },
-	{ V4L2_IDENT_AMBIGUOUS, "CX23418"   },
-	{ V4L2_IDENT_AMBIGUOUS, "CX23885"   },
+	{ TVEEPROM_AUDPROC_INTERNAL, "CX25841"   },
+	{ TVEEPROM_AUDPROC_INTERNAL, "CX25842"   },
+	{ TVEEPROM_AUDPROC_INTERNAL, "CX25843"   },
+	{ TVEEPROM_AUDPROC_INTERNAL, "CX23418"   },
+	{ TVEEPROM_AUDPROC_INTERNAL, "CX23885"   },
 	/* 40-44 */
-	{ V4L2_IDENT_AMBIGUOUS, "CX23888"   },
-	{ V4L2_IDENT_AMBIGUOUS, "SAA7131"   },
-	{ V4L2_IDENT_AMBIGUOUS, "CX23887"   },
-	{ V4L2_IDENT_AMBIGUOUS, "SAA7164"   },
-	{ V4L2_IDENT_AMBIGUOUS, "AU8522"    },
+	{ TVEEPROM_AUDPROC_INTERNAL, "CX23888"   },
+	{ TVEEPROM_AUDPROC_INTERNAL, "SAA7131"   },
+	{ TVEEPROM_AUDPROC_INTERNAL, "CX23887"   },
+	{ TVEEPROM_AUDPROC_INTERNAL, "SAA7164"   },
+	{ TVEEPROM_AUDPROC_INTERNAL, "AU8522"    },
 };
 
 /* This list is supplied by Hauppauge. Thanks! */
@@ -453,11 +443,11 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee,
 	int i, j, len, done, beenhere, tag, start;
 
 	int tuner1 = 0, t_format1 = 0, audioic = -1;
-	char *t_name1 = NULL;
+	const char *t_name1 = NULL;
 	const char *t_fmt_name1[8] = { " none", "", "", "", "", "", "", "" };
 
 	int tuner2 = 0, t_format2 = 0;
-	char *t_name2 = NULL;
+	const char *t_name2 = NULL;
 	const char *t_fmt_name2[8] = { " none", "", "", "", "", "", "", "" };
 
 	memset(tvee, 0, sizeof(*tvee));
@@ -545,10 +535,10 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee,
 			to indicate 4052 mux was removed in favor of using MSP
 			inputs directly. */
 			audioic = eeprom_data[i+2] & 0x7f;
-			if (audioic < ARRAY_SIZE(audioIC))
-				tvee->audio_processor = audioIC[audioic].id;
+			if (audioic < ARRAY_SIZE(audio_ic))
+				tvee->audio_processor = audio_ic[audioic].id;
 			else
-				tvee->audio_processor = V4L2_IDENT_UNKNOWN;
+				tvee->audio_processor = TVEEPROM_AUDPROC_OTHER;
 			break;
 
 		/* case 0x03: tag 'EEInfo' */
@@ -578,10 +568,10 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee,
 			to indicate 4052 mux was removed in favor of using MSP
 			inputs directly. */
 			audioic = eeprom_data[i+1] & 0x7f;
-			if (audioic < ARRAY_SIZE(audioIC))
-				tvee->audio_processor = audioIC[audioic].id;
+			if (audioic < ARRAY_SIZE(audio_ic))
+				tvee->audio_processor = audio_ic[audioic].id;
 			else
-				tvee->audio_processor = V4L2_IDENT_UNKNOWN;
+				tvee->audio_processor = TVEEPROM_AUDPROC_OTHER;
 
 			break;
 
@@ -726,11 +716,11 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee,
 			t_fmt_name2[6], t_fmt_name2[7], t_format2);
 	if (audioic < 0) {
 		tveeprom_info("audio processor is unknown (no idx)\n");
-		tvee->audio_processor = V4L2_IDENT_UNKNOWN;
+		tvee->audio_processor = TVEEPROM_AUDPROC_OTHER;
 	} else {
-		if (audioic < ARRAY_SIZE(audioIC))
+		if (audioic < ARRAY_SIZE(audio_ic))
 			tveeprom_info("audio processor is %s (idx %d)\n",
-					audioIC[audioic].name, audioic);
+					audio_ic[audioic].name, audioic);
 		else
 			tveeprom_info("audio processor is unknown (idx %d)\n",
 								audioic);
diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index 927956b4dca..e4b0669d49d 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -37,7 +37,6 @@
 #include <media/i2c-addr.h>
 #include <media/tveeprom.h>
 #include <media/v4l2-common.h>
-#include <media/v4l2-chip-ident.h>
 
 #include "em28xx.h"
 
@@ -2669,7 +2668,7 @@ static void em28xx_card_setup(struct em28xx *dev)
 
 		dev->tuner_type = tv.tuner_type;
 
-		if (tv.audio_processor == V4L2_IDENT_MSPX4XX) {
+		if (tv.audio_processor == TVEEPROM_AUDPROC_MSP) {
 			dev->i2s_speed = 2048000;
 			dev->board.has_msp34xx = 1;
 		}
diff --git a/include/media/tveeprom.h b/include/media/tveeprom.h
index a8ad75a9152..4a1191abd93 100644
--- a/include/media/tveeprom.h
+++ b/include/media/tveeprom.h
@@ -1,6 +1,17 @@
 /*
  */
 
+enum tveeprom_audio_processor {
+	/* No audio processor present */
+	TVEEPROM_AUDPROC_NONE,
+	/* The audio processor is internal to the video processor */
+	TVEEPROM_AUDPROC_INTERNAL,
+	/* The audio processor is a MSPXXXX device */
+	TVEEPROM_AUDPROC_MSP,
+	/* The audio processor is another device */
+	TVEEPROM_AUDPROC_OTHER,
+};
+
 struct tveeprom {
 	u32 has_radio;
 	/* If has_ir == 0, then it is unknown what the IR capabilities are,
-- 
cgit v1.2.3-70-g09d2


From ead5bc4e0bd94e4540bea60b782e2acdb345b803 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hans.verkuil@cisco.com>
Date: Wed, 29 May 2013 07:00:03 -0300
Subject: [media] au0828: set reg->size

The size field wasn't filled in.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/au0828/au0828-video.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/au0828/au0828-video.c b/drivers/media/usb/au0828/au0828-video.c
index 4944a365570..f6154546b5c 100644
--- a/drivers/media/usb/au0828/au0828-video.c
+++ b/drivers/media/usb/au0828/au0828-video.c
@@ -1759,6 +1759,7 @@ static int vidioc_g_register(struct file *file, void *priv,
 	struct au0828_dev *dev = fh->dev;
 
 	reg->val = au0828_read(dev, reg->reg);
+	reg->size = 1;
 	return 0;
 }
 
-- 
cgit v1.2.3-70-g09d2


From 04ae4cf2cb0c5963b0ea6554f573705c37172313 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hans.verkuil@cisco.com>
Date: Wed, 29 May 2013 07:00:04 -0300
Subject: [media] cx231xx: the reg->size field wasn't filled in

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/cx231xx/cx231xx-video.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/cx231xx/cx231xx-video.c b/drivers/media/usb/cx231xx/cx231xx-video.c
index 54cdd4dc455..99062610171 100644
--- a/drivers/media/usb/cx231xx/cx231xx-video.c
+++ b/drivers/media/usb/cx231xx/cx231xx-video.c
@@ -1272,36 +1272,43 @@ int cx231xx_g_register(struct file *file, void *priv,
 				(u16)reg->reg, value, 4);
 		reg->val = value[0] | value[1] << 8 |
 			value[2] << 16 | value[3] << 24;
+		reg->size = 4;
 		break;
 	case 1:	/* AFE - read byte */
 		ret = cx231xx_read_i2c_data(dev, AFE_DEVICE_ADDRESS,
 				(u16)reg->reg, 2, &data, 1);
 		reg->val = data;
+		reg->size = 1;
 		break;
 	case 2:	/* Video Block - read byte */
 		ret = cx231xx_read_i2c_data(dev, VID_BLK_I2C_ADDRESS,
 				(u16)reg->reg, 2, &data, 1);
 		reg->val = data;
+		reg->size = 1;
 		break;
 	case 3:	/* I2S block - read byte */
 		ret = cx231xx_read_i2c_data(dev, I2S_BLK_DEVICE_ADDRESS,
 				(u16)reg->reg, 1, &data, 1);
 		reg->val = data;
+		reg->size = 1;
 		break;
 	case 4: /* AFE - read dword */
 		ret = cx231xx_read_i2c_data(dev, AFE_DEVICE_ADDRESS,
 				(u16)reg->reg, 2, &data, 4);
 		reg->val = data;
+		reg->size = 4;
 		break;
 	case 5: /* Video Block - read dword */
 		ret = cx231xx_read_i2c_data(dev, VID_BLK_I2C_ADDRESS,
 				(u16)reg->reg, 2, &data, 4);
 		reg->val = data;
+		reg->size = 4;
 		break;
 	case 6: /* I2S Block - read dword */
 		ret = cx231xx_read_i2c_data(dev, I2S_BLK_DEVICE_ADDRESS,
 				(u16)reg->reg, 1, &data, 4);
 		reg->val = data;
+		reg->size = 4;
 		break;
 	default:
 		return -EINVAL;
-- 
cgit v1.2.3-70-g09d2


From f82fadcfecb5d4aff0711d63fd321f7fabb0f2fa Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hans.verkuil@cisco.com>
Date: Wed, 29 May 2013 07:00:05 -0300
Subject: [media] sn9c20x: the reg->size field wasn't filled in

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/gspca/sn9c20x.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/gspca/sn9c20x.c b/drivers/media/usb/gspca/sn9c20x.c
index 23b71f9f594..f4453d52801 100644
--- a/drivers/media/usb/gspca/sn9c20x.c
+++ b/drivers/media/usb/gspca/sn9c20x.c
@@ -1557,6 +1557,7 @@ static int sd_dbg_g_register(struct gspca_dev *gspca_dev,
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
+	reg->size = 1;
 	switch (reg->match.addr) {
 	case 0:
 		if (reg->reg < 0x1000 || reg->reg > 0x11ff)
@@ -1568,6 +1569,7 @@ static int sd_dbg_g_register(struct gspca_dev *gspca_dev,
 		if (sd->sensor >= SENSOR_MT9V011 &&
 		    sd->sensor <= SENSOR_MT9M112) {
 			i2c_r2(gspca_dev, reg->reg, (u16 *) &reg->val);
+			reg->size = 2;
 		} else {
 			i2c_r1(gspca_dev, reg->reg, (u8 *) &reg->val);
 		}
-- 
cgit v1.2.3-70-g09d2


From 43aea90116c4fd80fd3d77b268b4a52ad8bf7bfb Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hans.verkuil@cisco.com>
Date: Wed, 29 May 2013 07:00:06 -0300
Subject: [media] pvrusb2: drop g/s_register ioctls

Register access to subdevices no longer needs bridge support for those
ioctls. The v4l2 core handles that these days.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Mike Isely <isely@isely.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/pvrusb2/pvrusb2-hdw.c  | 36 --------------------------------
 drivers/media/usb/pvrusb2/pvrusb2-hdw.h  |  9 --------
 drivers/media/usb/pvrusb2/pvrusb2-v4l2.c | 34 ------------------------------
 3 files changed, 79 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
index 01d1c2d47cb..d3292092966 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
@@ -5162,39 +5162,3 @@ static int pvr2_hdw_get_eeprom_addr(struct pvr2_hdw *hdw)
 	} while(0); LOCK_GIVE(hdw->ctl_lock);
 	return result;
 }
-
-
-int pvr2_hdw_register_access(struct pvr2_hdw *hdw,
-			     const struct v4l2_dbg_match *match, u64 reg_id,
-			     int setFl, u64 *val_ptr)
-{
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	struct v4l2_dbg_register req;
-	int stat = 0;
-	int okFl = 0;
-
-	req.match = *match;
-	req.reg = reg_id;
-	if (setFl) req.val = *val_ptr;
-	/* It would be nice to know if a sub-device answered the request */
-	v4l2_device_call_all(&hdw->v4l2_dev, 0, core, g_register, &req);
-	if (!setFl) *val_ptr = req.val;
-	if (okFl) {
-		return stat;
-	}
-	return -EINVAL;
-#else
-	return -ENOSYS;
-#endif
-}
-
-
-/*
-  Stuff for Emacs to see, in order to encourage consistent editing style:
-  *** Local Variables: ***
-  *** mode: c ***
-  *** fill-column: 75 ***
-  *** tab-width: 8 ***
-  *** c-basic-offset: 8 ***
-  *** End: ***
-  */
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-hdw.h b/drivers/media/usb/pvrusb2/pvrusb2-hdw.h
index 91bae930cd7..1a135cf6ae4 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-hdw.h
+++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.h
@@ -234,15 +234,6 @@ int pvr2_hdw_v4l_get_minor_number(struct pvr2_hdw *,enum pvr2_v4l_type index);
 void pvr2_hdw_v4l_store_minor_number(struct pvr2_hdw *,
 				     enum pvr2_v4l_type index,int);
 
-/* Direct read/write access to chip's registers:
-   match - specify criteria to identify target chip (this is a v4l dbg struct)
-   reg_id  - register number to access
-   setFl   - true to set the register, false to read it
-   val_ptr - storage location for source / result. */
-int pvr2_hdw_register_access(struct pvr2_hdw *,
-			     const struct v4l2_dbg_match *match, u64 reg_id,
-			     int setFl, u64 *val_ptr);
-
 /* The following entry points are all lower level things you normally don't
    want to worry about. */
 
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c b/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
index a8a65fa5793..82f619ba5cc 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
@@ -800,36 +800,6 @@ static int pvr2_log_status(struct file *file, void *priv)
 	return 0;
 }
 
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int pvr2_g_register(struct file *file, void *priv, struct v4l2_dbg_register *req)
-{
-	struct pvr2_v4l2_fh *fh = file->private_data;
-	struct pvr2_hdw *hdw = fh->channel.mc_head->hdw;
-	u64 val;
-	int ret;
-
-	ret = pvr2_hdw_register_access(
-			hdw, &req->match, req->reg,
-			0, &val);
-	req->val = val;
-	return ret;
-}
-
-static int pvr2_s_register(struct file *file, void *priv, const struct v4l2_dbg_register *req)
-{
-	struct pvr2_v4l2_fh *fh = file->private_data;
-	struct pvr2_hdw *hdw = fh->channel.mc_head->hdw;
-	u64 val;
-	int ret;
-
-	val = req->val;
-	ret = pvr2_hdw_register_access(
-			hdw, &req->match, req->reg,
-			1, &val);
-	return ret;
-}
-#endif
-
 static const struct v4l2_ioctl_ops pvr2_ioctl_ops = {
 	.vidioc_querycap		    = pvr2_querycap,
 	.vidioc_g_priority		    = pvr2_g_priority,
@@ -864,10 +834,6 @@ static const struct v4l2_ioctl_ops pvr2_ioctl_ops = {
 	.vidioc_g_ext_ctrls		    = pvr2_g_ext_ctrls,
 	.vidioc_s_ext_ctrls		    = pvr2_s_ext_ctrls,
 	.vidioc_try_ext_ctrls		    = pvr2_try_ext_ctrls,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.vidioc_g_register		    = pvr2_g_register,
-	.vidioc_s_register		    = pvr2_s_register,
-#endif
 };
 
 static void pvr2_v4l2_dev_destroy(struct pvr2_v4l2_dev *dip)
-- 
cgit v1.2.3-70-g09d2


From 804be2d4933a44ce76bce3d12b09c5db980523a4 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hans.verkuil@cisco.com>
Date: Mon, 3 Jun 2013 05:36:44 -0300
Subject: [media] tm6000: remove deprecated current_norm

Replace current_norm by g_std. Also initialize the standard to the more
common NTSC-M format (which is also what current_norm used).

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/tm6000/tm6000-cards.c |  2 +-
 drivers/media/usb/tm6000/tm6000-video.c | 13 +++++++++++--
 2 files changed, 12 insertions(+), 3 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/tm6000/tm6000-cards.c b/drivers/media/usb/tm6000/tm6000-cards.c
index 307d8c5fb7c..1ccaaddaa30 100644
--- a/drivers/media/usb/tm6000/tm6000-cards.c
+++ b/drivers/media/usb/tm6000/tm6000-cards.c
@@ -1114,7 +1114,7 @@ static int tm6000_init_dev(struct tm6000_core *dev)
 	/* Default values for STD and resolutions */
 	dev->width = 720;
 	dev->height = 480;
-	dev->norm = V4L2_STD_PAL_M;
+	dev->norm = V4L2_STD_NTSC_M;
 
 	/* Configure tuner */
 	tm6000_config_tuner(dev);
diff --git a/drivers/media/usb/tm6000/tm6000-video.c b/drivers/media/usb/tm6000/tm6000-video.c
index a78de1d1bc9..cc1aa14996f 100644
--- a/drivers/media/usb/tm6000/tm6000-video.c
+++ b/drivers/media/usb/tm6000/tm6000-video.c
@@ -1076,6 +1076,15 @@ static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id norm)
 	return 0;
 }
 
+static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *norm)
+{
+	struct tm6000_fh *fh = priv;
+	struct tm6000_core *dev = fh->dev;
+
+	*norm = dev->norm;
+	return 0;
+}
+
 static const char *iname[] = {
 	[TM6000_INPUT_TV] = "Television",
 	[TM6000_INPUT_COMPOSITE1] = "Composite 1",
@@ -1134,7 +1143,7 @@ static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
 
 	dev->input = i;
 
-	rc = vidioc_s_std(file, priv, dev->vfd->current_norm);
+	rc = vidioc_s_std(file, priv, dev->norm);
 
 	return rc;
 }
@@ -1547,6 +1556,7 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
 	.vidioc_try_fmt_vid_cap   = vidioc_try_fmt_vid_cap,
 	.vidioc_s_fmt_vid_cap     = vidioc_s_fmt_vid_cap,
 	.vidioc_s_std             = vidioc_s_std,
+	.vidioc_g_std             = vidioc_g_std,
 	.vidioc_enum_input        = vidioc_enum_input,
 	.vidioc_g_input           = vidioc_g_input,
 	.vidioc_s_input           = vidioc_s_input,
@@ -1570,7 +1580,6 @@ static struct video_device tm6000_template = {
 	.ioctl_ops      = &video_ioctl_ops,
 	.release	= video_device_release,
 	.tvnorms        = TM6000_STD,
-	.current_norm   = V4L2_STD_NTSC_M,
 };
 
 static const struct v4l2_file_operations radio_fops = {
-- 
cgit v1.2.3-70-g09d2


From 3b8436d9db43a810dd44393733b34fda6e0f0b9d Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hans.verkuil@cisco.com>
Date: Mon, 3 Jun 2013 05:36:47 -0300
Subject: [media] usbvision: replace current_norm by g_std

current_norm use is deprecated because it is per-devicenode and if you
have more device nodes all dependent on the same video source, then this
no longer works. Just implement g_std instead.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/usbvision/usbvision-video.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/usbvision/usbvision-video.c b/drivers/media/usb/usbvision/usbvision-video.c
index d34c2afe2c2..7ad872a3e31 100644
--- a/drivers/media/usb/usbvision/usbvision-video.c
+++ b/drivers/media/usb/usbvision/usbvision-video.c
@@ -608,6 +608,14 @@ static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id id)
 	return 0;
 }
 
+static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *id)
+{
+	struct usb_usbvision *usbvision = video_drvdata(file);
+
+	*id = usbvision->tvnorm_id;
+	return 0;
+}
+
 static int vidioc_g_tuner(struct file *file, void *priv,
 				struct v4l2_tuner *vt)
 {
@@ -1248,6 +1256,7 @@ static const struct v4l2_ioctl_ops usbvision_ioctl_ops = {
 	.vidioc_qbuf          = vidioc_qbuf,
 	.vidioc_dqbuf         = vidioc_dqbuf,
 	.vidioc_s_std         = vidioc_s_std,
+	.vidioc_g_std         = vidioc_g_std,
 	.vidioc_enum_input    = vidioc_enum_input,
 	.vidioc_g_input       = vidioc_g_input,
 	.vidioc_s_input       = vidioc_s_input,
@@ -1274,7 +1283,6 @@ static struct video_device usbvision_video_template = {
 	.name           = "usbvision-video",
 	.release	= video_device_release,
 	.tvnorms        = USBVISION_NORMS,
-	.current_norm   = V4L2_STD_PAL
 };
 
 
@@ -1307,9 +1315,6 @@ static struct video_device usbvision_radio_template = {
 	.name		= "usbvision-radio",
 	.release	= video_device_release,
 	.ioctl_ops	= &usbvision_radio_ioctl_ops,
-
-	.tvnorms              = USBVISION_NORMS,
-	.current_norm         = V4L2_STD_PAL
 };
 
 
-- 
cgit v1.2.3-70-g09d2


From 5077ac3b8108007f4a2b4589f2d373cf55453206 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Wed, 22 May 2013 11:25:52 -0300
Subject: Properly handle tristate dependencies on USB/PCI menus

As USB/PCI/MEDIA_SUPPORT dependencies can be tristate, we can't
simply make the bool menu to be dependent on it. Everything below
the menu should also depend on it, otherwise, we risk to allow
building them with 'y', while only 'm' would be supported.

So, add an IF just before everything below, in order to avoid
such risks.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/pci/Kconfig | 4 +++-
 drivers/media/usb/Kconfig | 3 +--
 2 files changed, 4 insertions(+), 3 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/pci/Kconfig b/drivers/media/pci/Kconfig
index d4e2ed3f27e..53196f1366f 100644
--- a/drivers/media/pci/Kconfig
+++ b/drivers/media/pci/Kconfig
@@ -1,6 +1,7 @@
+if PCI && MEDIA_SUPPORT
+
 menuconfig MEDIA_PCI_SUPPORT
 	bool "Media PCI Adapters"
-	depends on PCI && MEDIA_SUPPORT
 	help
 	  Enable media drivers for PCI/PCIe bus.
 	  If you have such devices, say Y.
@@ -45,3 +46,4 @@ source "drivers/media/pci/ddbridge/Kconfig"
 endif
 
 endif #MEDIA_PCI_SUPPORT
+endif #PCI
diff --git a/drivers/media/usb/Kconfig b/drivers/media/usb/Kconfig
index 0d8fe005d1f..7cac453e34c 100644
--- a/drivers/media/usb/Kconfig
+++ b/drivers/media/usb/Kconfig
@@ -1,8 +1,7 @@
-if USB
+if USB && MEDIA_SUPPORT
 
 menuconfig MEDIA_USB_SUPPORT
 	bool "Media USB Adapters"
-	depends on MEDIA_SUPPORT
 	help
 	  Enable media drivers for USB bus.
 	  If you have such devices, say Y.
-- 
cgit v1.2.3-70-g09d2


From 07342664d3725de4b21478da222593da491afcd8 Mon Sep 17 00:00:00 2001
From: Thomas Meyer <thomas@m3y3r.de>
Date: Sat, 1 Jun 2013 05:38:30 -0300
Subject: [media] pvrusb2: Cocci spatch "memdup.spatch"

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/pvrusb2/pvrusb2-io.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/pvrusb2/pvrusb2-io.c b/drivers/media/usb/pvrusb2/pvrusb2-io.c
index 20b6ae0bb40..1e354747de3 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-io.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-io.c
@@ -354,9 +354,9 @@ static int pvr2_stream_buffer_count(struct pvr2_stream *sp,unsigned int cnt)
 		if (scnt < sp->buffer_slot_count) {
 			struct pvr2_buffer **nb = NULL;
 			if (scnt) {
-				nb = kmalloc(scnt * sizeof(*nb),GFP_KERNEL);
+				nb = kmemdup(sp->buffers, scnt * sizeof(*nb),
+					     GFP_KERNEL);
 				if (!nb) return -ENOMEM;
-				memcpy(nb,sp->buffers,scnt * sizeof(*nb));
 			}
 			kfree(sp->buffers);
 			sp->buffers = nb;
-- 
cgit v1.2.3-70-g09d2


From c778edb5bdb7a96712848493273762427a51e200 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hans.verkuil@cisco.com>
Date: Mon, 17 Jun 2013 20:56:40 -0300
Subject: [media] mxl111sf: don't redefine pr_err/info/debug

Remove the silly redefines of pr_err/info/debug.
This improves readability and it also gets rid of a bunch of warnings when
compiling this driver for older kernels using the compatibility media_build
system.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.c |  8 +--
 drivers/media/usb/dvb-usb-v2/mxl111sf.c       | 90 +++++++++++++--------------
 2 files changed, 45 insertions(+), 53 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.c b/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.c
index ef4c65fcbb7..879c529640f 100644
--- a/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.c
+++ b/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.c
@@ -31,8 +31,6 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able)).");
 	if (mxl111sf_tuner_debug) \
 		mxl_printk(KERN_DEBUG, fmt, ##arg)
 
-#define err pr_err
-
 /* ------------------------------------------------------------------------ */
 
 struct mxl111sf_tuner_state {
@@ -113,7 +111,7 @@ static struct mxl111sf_reg_ctrl_info *mxl111sf_calc_phy_tune_regs(u32 freq,
 		filt_bw = 63;
 		break;
 	default:
-		err("%s: invalid bandwidth setting!", __func__);
+		pr_err("%s: invalid bandwidth setting!", __func__);
 		return NULL;
 	}
 
@@ -304,12 +302,12 @@ static int mxl111sf_tuner_set_params(struct dvb_frontend *fe)
 			bw = 8;
 			break;
 		default:
-			err("%s: bandwidth not set!", __func__);
+			pr_err("%s: bandwidth not set!", __func__);
 			return -EINVAL;
 		}
 		break;
 	default:
-		err("%s: modulation type not supported!", __func__);
+		pr_err("%s: modulation type not supported!", __func__);
 		return -EINVAL;
 	}
 	ret = mxl1x1sf_tune_rf(fe, c->frequency, bw);
diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf.c b/drivers/media/usb/dvb-usb-v2/mxl111sf.c
index efdcb15358f..e97964ef7f5 100644
--- a/drivers/media/usb/dvb-usb-v2/mxl111sf.c
+++ b/drivers/media/usb/dvb-usb-v2/mxl111sf.c
@@ -52,12 +52,6 @@ MODULE_PARM_DESC(rfswitch, "force rf switch position (0=auto, 1=ext, 2=int).");
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
-#define deb_info pr_debug
-#define deb_reg pr_debug
-#define deb_adv pr_debug
-#define err pr_err
-#define info pr_info
-
 int mxl111sf_ctrl_msg(struct dvb_usb_device *d,
 		      u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen)
 {
@@ -65,7 +59,7 @@ int mxl111sf_ctrl_msg(struct dvb_usb_device *d,
 	int ret;
 	u8 sndbuf[1+wlen];
 
-	deb_adv("%s(wlen = %d, rlen = %d)\n", __func__, wlen, rlen);
+	pr_debug("%s(wlen = %d, rlen = %d)\n", __func__, wlen, rlen);
 
 	memset(sndbuf, 0, 1+wlen);
 
@@ -98,12 +92,12 @@ int mxl111sf_read_reg(struct mxl111sf_state *state, u8 addr, u8 *data)
 	if (buf[0] == addr)
 		*data = buf[1];
 	else {
-		err("invalid response reading reg: 0x%02x != 0x%02x, 0x%02x",
+		pr_err("invalid response reading reg: 0x%02x != 0x%02x, 0x%02x",
 		    addr, buf[0], buf[1]);
 		ret = -EINVAL;
 	}
 
-	deb_reg("R: (0x%02x, 0x%02x)\n", addr, *data);
+	pr_debug("R: (0x%02x, 0x%02x)\n", addr, *data);
 fail:
 	return ret;
 }
@@ -113,11 +107,11 @@ int mxl111sf_write_reg(struct mxl111sf_state *state, u8 addr, u8 data)
 	u8 buf[] = { addr, data };
 	int ret;
 
-	deb_reg("W: (0x%02x, 0x%02x)\n", addr, data);
+	pr_debug("W: (0x%02x, 0x%02x)\n", addr, data);
 
 	ret = mxl111sf_ctrl_msg(state->d, MXL_CMD_REG_WRITE, buf, 2, NULL, 0);
 	if (mxl_fail(ret))
-		err("error writing reg: 0x%02x, val: 0x%02x", addr, data);
+		pr_err("error writing reg: 0x%02x, val: 0x%02x", addr, data);
 	return ret;
 }
 
@@ -134,7 +128,7 @@ int mxl111sf_write_reg_mask(struct mxl111sf_state *state,
 #if 1
 		/* dont know why this usually errors out on the first try */
 		if (mxl_fail(ret))
-			err("error writing addr: 0x%02x, mask: 0x%02x, "
+			pr_err("error writing addr: 0x%02x, mask: 0x%02x, "
 			    "data: 0x%02x, retrying...", addr, mask, data);
 
 		ret = mxl111sf_read_reg(state, addr, &val);
@@ -167,7 +161,7 @@ int mxl111sf_ctrl_program_regs(struct mxl111sf_state *state,
 					      ctrl_reg_info[i].mask,
 					      ctrl_reg_info[i].data);
 		if (mxl_fail(ret)) {
-			err("failed on reg #%d (0x%02x)", i,
+			pr_err("failed on reg #%d (0x%02x)", i,
 			    ctrl_reg_info[i].addr);
 			break;
 		}
@@ -225,7 +219,7 @@ static int mxl1x1sf_get_chip_info(struct mxl111sf_state *state)
 		mxl_rev = "UNKNOWN REVISION";
 		break;
 	}
-	info("%s detected, %s (0x%x)", mxl_chip, mxl_rev, ver);
+	pr_info("%s detected, %s (0x%x)", mxl_chip, mxl_rev, ver);
 fail:
 	return ret;
 }
@@ -239,7 +233,7 @@ fail:
 			  " on first probe attempt");			\
 		___ret = mxl1x1sf_get_chip_info(state);			\
 		if (mxl_fail(___ret))					\
-			err("failed to get chip info during probe");	\
+			pr_err("failed to get chip info during probe");	\
 		else							\
 			mxl_debug("probe needed a retry "		\
 				  "in order to succeed.");		\
@@ -270,14 +264,14 @@ static int mxl111sf_adap_fe_init(struct dvb_frontend *fe)
 		goto fail;
 	}
 
-	deb_info("%s()\n", __func__);
+	pr_debug("%s()\n", __func__);
 
 	mutex_lock(&state->fe_lock);
 
 	state->alt_mode = adap_state->alt_mode;
 
 	if (usb_set_interface(d->udev, 0, state->alt_mode) < 0)
-		err("set interface failed");
+		pr_err("set interface failed");
 
 	err = mxl1x1sf_soft_reset(state);
 	mxl_fail(err);
@@ -326,7 +320,7 @@ static int mxl111sf_adap_fe_sleep(struct dvb_frontend *fe)
 		goto fail;
 	}
 
-	deb_info("%s()\n", __func__);
+	pr_debug("%s()\n", __func__);
 
 	err = (adap_state->fe_sleep) ? adap_state->fe_sleep(fe) : 0;
 
@@ -344,7 +338,7 @@ static int mxl111sf_ep6_streaming_ctrl(struct dvb_frontend *fe, int onoff)
 	struct mxl111sf_adap_state *adap_state = &state->adap_state[fe->id];
 	int ret = 0;
 
-	deb_info("%s(%d)\n", __func__, onoff);
+	pr_debug("%s(%d)\n", __func__, onoff);
 
 	if (onoff) {
 		ret = mxl111sf_enable_usb_output(state);
@@ -368,7 +362,7 @@ static int mxl111sf_ep5_streaming_ctrl(struct dvb_frontend *fe, int onoff)
 	struct mxl111sf_state *state = fe_to_priv(fe);
 	int ret = 0;
 
-	deb_info("%s(%d)\n", __func__, onoff);
+	pr_debug("%s(%d)\n", __func__, onoff);
 
 	if (onoff) {
 		ret = mxl111sf_enable_usb_output(state);
@@ -394,7 +388,7 @@ static int mxl111sf_ep4_streaming_ctrl(struct dvb_frontend *fe, int onoff)
 	struct mxl111sf_state *state = fe_to_priv(fe);
 	int ret = 0;
 
-	deb_info("%s(%d)\n", __func__, onoff);
+	pr_debug("%s(%d)\n", __func__, onoff);
 
 	if (onoff) {
 		ret = mxl111sf_enable_usb_output(state);
@@ -424,7 +418,7 @@ static int mxl111sf_lgdt3305_frontend_attach(struct dvb_usb_adapter *adap, u8 fe
 	struct mxl111sf_adap_state *adap_state = &state->adap_state[fe_id];
 	int ret;
 
-	deb_adv("%s()\n", __func__);
+	pr_debug("%s()\n", __func__);
 
 	/* save a pointer to the dvb_usb_device in device state */
 	state->d = d;
@@ -432,7 +426,7 @@ static int mxl111sf_lgdt3305_frontend_attach(struct dvb_usb_adapter *adap, u8 fe
 	state->alt_mode = adap_state->alt_mode;
 
 	if (usb_set_interface(d->udev, 0, state->alt_mode) < 0)
-		err("set interface failed");
+		pr_err("set interface failed");
 
 	state->gpio_mode = MXL111SF_GPIO_MOD_ATSC;
 	adap_state->gpio_mode = state->gpio_mode;
@@ -495,7 +489,7 @@ static int mxl111sf_lg2160_frontend_attach(struct dvb_usb_adapter *adap, u8 fe_i
 	struct mxl111sf_adap_state *adap_state = &state->adap_state[fe_id];
 	int ret;
 
-	deb_adv("%s()\n", __func__);
+	pr_debug("%s()\n", __func__);
 
 	/* save a pointer to the dvb_usb_device in device state */
 	state->d = d;
@@ -503,7 +497,7 @@ static int mxl111sf_lg2160_frontend_attach(struct dvb_usb_adapter *adap, u8 fe_i
 	state->alt_mode = adap_state->alt_mode;
 
 	if (usb_set_interface(d->udev, 0, state->alt_mode) < 0)
-		err("set interface failed");
+		pr_err("set interface failed");
 
 	state->gpio_mode = MXL111SF_GPIO_MOD_MH;
 	adap_state->gpio_mode = state->gpio_mode;
@@ -580,7 +574,7 @@ static int mxl111sf_lg2161_frontend_attach(struct dvb_usb_adapter *adap, u8 fe_i
 	struct mxl111sf_adap_state *adap_state = &state->adap_state[fe_id];
 	int ret;
 
-	deb_adv("%s()\n", __func__);
+	pr_debug("%s()\n", __func__);
 
 	/* save a pointer to the dvb_usb_device in device state */
 	state->d = d;
@@ -588,7 +582,7 @@ static int mxl111sf_lg2161_frontend_attach(struct dvb_usb_adapter *adap, u8 fe_i
 	state->alt_mode = adap_state->alt_mode;
 
 	if (usb_set_interface(d->udev, 0, state->alt_mode) < 0)
-		err("set interface failed");
+		pr_err("set interface failed");
 
 	state->gpio_mode = MXL111SF_GPIO_MOD_MH;
 	adap_state->gpio_mode = state->gpio_mode;
@@ -667,7 +661,7 @@ static int mxl111sf_lg2161_ep6_frontend_attach(struct dvb_usb_adapter *adap, u8
 	struct mxl111sf_adap_state *adap_state = &state->adap_state[fe_id];
 	int ret;
 
-	deb_adv("%s()\n", __func__);
+	pr_debug("%s()\n", __func__);
 
 	/* save a pointer to the dvb_usb_device in device state */
 	state->d = d;
@@ -675,7 +669,7 @@ static int mxl111sf_lg2161_ep6_frontend_attach(struct dvb_usb_adapter *adap, u8
 	state->alt_mode = adap_state->alt_mode;
 
 	if (usb_set_interface(d->udev, 0, state->alt_mode) < 0)
-		err("set interface failed");
+		pr_err("set interface failed");
 
 	state->gpio_mode = MXL111SF_GPIO_MOD_MH;
 	adap_state->gpio_mode = state->gpio_mode;
@@ -742,7 +736,7 @@ static int mxl111sf_attach_demod(struct dvb_usb_adapter *adap, u8 fe_id)
 	struct mxl111sf_adap_state *adap_state = &state->adap_state[fe_id];
 	int ret;
 
-	deb_adv("%s()\n", __func__);
+	pr_debug("%s()\n", __func__);
 
 	/* save a pointer to the dvb_usb_device in device state */
 	state->d = d;
@@ -750,7 +744,7 @@ static int mxl111sf_attach_demod(struct dvb_usb_adapter *adap, u8 fe_id)
 	state->alt_mode = adap_state->alt_mode;
 
 	if (usb_set_interface(d->udev, 0, state->alt_mode) < 0)
-		err("set interface failed");
+		pr_err("set interface failed");
 
 	state->gpio_mode = MXL111SF_GPIO_MOD_DVBT;
 	adap_state->gpio_mode = state->gpio_mode;
@@ -802,7 +796,7 @@ static inline int mxl111sf_set_ant_path(struct mxl111sf_state *state,
 }
 
 #define DbgAntHunt(x, pwr0, pwr1, pwr2, pwr3) \
-	err("%s(%d) FINAL input set to %s rxPwr:%d|%d|%d|%d\n", \
+	pr_err("%s(%d) FINAL input set to %s rxPwr:%d|%d|%d|%d\n", \
 	    __func__, __LINE__, \
 	    (ANT_PATH_EXTERNAL == x) ? "EXTERNAL" : "INTERNAL", \
 	    pwr0, pwr1, pwr2, pwr3)
@@ -868,7 +862,7 @@ static int mxl111sf_attach_tuner(struct dvb_usb_adapter *adap)
 	struct mxl111sf_state *state = adap_to_priv(adap);
 	int i;
 
-	deb_adv("%s()\n", __func__);
+	pr_debug("%s()\n", __func__);
 
 	for (i = 0; i < state->num_frontends; i++) {
 		if (dvb_attach(mxl111sf_tuner_attach, adap->fe[i], state,
@@ -902,7 +896,7 @@ static int mxl111sf_init(struct dvb_usb_device *d)
 
 	ret = get_chip_info(state);
 	if (mxl_fail(ret))
-		err("failed to get chip info during probe");
+		pr_err("failed to get chip info during probe");
 
 	mutex_init(&state->fe_lock);
 
@@ -950,7 +944,7 @@ static int mxl111sf_frontend_attach_mh(struct dvb_usb_adapter *adap)
 static int mxl111sf_frontend_attach_atsc_mh(struct dvb_usb_adapter *adap)
 {
 	int ret;
-	deb_info("%s\n", __func__);
+	pr_debug("%s\n", __func__);
 
 	ret = mxl111sf_lgdt3305_frontend_attach(adap, 0);
 	if (ret < 0)
@@ -970,7 +964,7 @@ static int mxl111sf_frontend_attach_atsc_mh(struct dvb_usb_adapter *adap)
 static int mxl111sf_frontend_attach_mercury(struct dvb_usb_adapter *adap)
 {
 	int ret;
-	deb_info("%s\n", __func__);
+	pr_debug("%s\n", __func__);
 
 	ret = mxl111sf_lgdt3305_frontend_attach(adap, 0);
 	if (ret < 0)
@@ -990,7 +984,7 @@ static int mxl111sf_frontend_attach_mercury(struct dvb_usb_adapter *adap)
 static int mxl111sf_frontend_attach_mercury_mh(struct dvb_usb_adapter *adap)
 {
 	int ret;
-	deb_info("%s\n", __func__);
+	pr_debug("%s\n", __func__);
 
 	ret = mxl111sf_attach_demod(adap, 0);
 	if (ret < 0)
@@ -1006,7 +1000,7 @@ static int mxl111sf_frontend_attach_mercury_mh(struct dvb_usb_adapter *adap)
 
 static void mxl111sf_stream_config_bulk(struct usb_data_stream_properties *stream, u8 endpoint)
 {
-	deb_info("%s: endpoint=%d size=8192\n", __func__, endpoint);
+	pr_debug("%s: endpoint=%d size=8192\n", __func__, endpoint);
 	stream->type = USB_BULK;
 	stream->count = 5;
 	stream->endpoint = endpoint;
@@ -1016,7 +1010,7 @@ static void mxl111sf_stream_config_bulk(struct usb_data_stream_properties *strea
 static void mxl111sf_stream_config_isoc(struct usb_data_stream_properties *stream,
 		u8 endpoint, int framesperurb, int framesize)
 {
-	deb_info("%s: endpoint=%d size=%d\n", __func__, endpoint,
+	pr_debug("%s: endpoint=%d size=%d\n", __func__, endpoint,
 			framesperurb * framesize);
 	stream->type = USB_ISOC;
 	stream->count = 5;
@@ -1035,7 +1029,7 @@ static void mxl111sf_stream_config_isoc(struct usb_data_stream_properties *strea
 static int mxl111sf_get_stream_config_dvbt(struct dvb_frontend *fe,
 		u8 *ts_type, struct usb_data_stream_properties *stream)
 {
-	deb_info("%s: fe=%d\n", __func__, fe->id);
+	pr_debug("%s: fe=%d\n", __func__, fe->id);
 
 	*ts_type = DVB_USB_FE_TS_TYPE_188;
 	if (dvb_usb_mxl111sf_isoc)
@@ -1076,7 +1070,7 @@ static struct dvb_usb_device_properties mxl111sf_props_dvbt = {
 static int mxl111sf_get_stream_config_atsc(struct dvb_frontend *fe,
 		u8 *ts_type, struct usb_data_stream_properties *stream)
 {
-	deb_info("%s: fe=%d\n", __func__, fe->id);
+	pr_debug("%s: fe=%d\n", __func__, fe->id);
 
 	*ts_type = DVB_USB_FE_TS_TYPE_188;
 	if (dvb_usb_mxl111sf_isoc)
@@ -1117,7 +1111,7 @@ static struct dvb_usb_device_properties mxl111sf_props_atsc = {
 static int mxl111sf_get_stream_config_mh(struct dvb_frontend *fe,
 		u8 *ts_type, struct usb_data_stream_properties *stream)
 {
-	deb_info("%s: fe=%d\n", __func__, fe->id);
+	pr_debug("%s: fe=%d\n", __func__, fe->id);
 
 	*ts_type = DVB_USB_FE_TS_TYPE_RAW;
 	if (dvb_usb_mxl111sf_isoc)
@@ -1158,7 +1152,7 @@ static struct dvb_usb_device_properties mxl111sf_props_mh = {
 static int mxl111sf_get_stream_config_atsc_mh(struct dvb_frontend *fe,
 		u8 *ts_type, struct usb_data_stream_properties *stream)
 {
-	deb_info("%s: fe=%d\n", __func__, fe->id);
+	pr_debug("%s: fe=%d\n", __func__, fe->id);
 
 	if (fe->id == 0) {
 		*ts_type = DVB_USB_FE_TS_TYPE_188;
@@ -1184,7 +1178,7 @@ static int mxl111sf_get_stream_config_atsc_mh(struct dvb_frontend *fe,
 
 static int mxl111sf_streaming_ctrl_atsc_mh(struct dvb_frontend *fe, int onoff)
 {
-	deb_info("%s: fe=%d onoff=%d\n", __func__, fe->id, onoff);
+	pr_debug("%s: fe=%d onoff=%d\n", __func__, fe->id, onoff);
 
 	if (fe->id == 0)
 		return mxl111sf_ep6_streaming_ctrl(fe, onoff);
@@ -1228,7 +1222,7 @@ static struct dvb_usb_device_properties mxl111sf_props_atsc_mh = {
 static int mxl111sf_get_stream_config_mercury(struct dvb_frontend *fe,
 		u8 *ts_type, struct usb_data_stream_properties *stream)
 {
-	deb_info("%s: fe=%d\n", __func__, fe->id);
+	pr_debug("%s: fe=%d\n", __func__, fe->id);
 
 	if (fe->id == 0) {
 		*ts_type = DVB_USB_FE_TS_TYPE_188;
@@ -1260,7 +1254,7 @@ static int mxl111sf_get_stream_config_mercury(struct dvb_frontend *fe,
 
 static int mxl111sf_streaming_ctrl_mercury(struct dvb_frontend *fe, int onoff)
 {
-	deb_info("%s: fe=%d onoff=%d\n", __func__, fe->id, onoff);
+	pr_debug("%s: fe=%d onoff=%d\n", __func__, fe->id, onoff);
 
 	if (fe->id == 0)
 		return mxl111sf_ep6_streaming_ctrl(fe, onoff);
@@ -1306,7 +1300,7 @@ static struct dvb_usb_device_properties mxl111sf_props_mercury = {
 static int mxl111sf_get_stream_config_mercury_mh(struct dvb_frontend *fe,
 		u8 *ts_type, struct usb_data_stream_properties *stream)
 {
-	deb_info("%s: fe=%d\n", __func__, fe->id);
+	pr_debug("%s: fe=%d\n", __func__, fe->id);
 
 	if (fe->id == 0) {
 		*ts_type = DVB_USB_FE_TS_TYPE_188;
@@ -1332,7 +1326,7 @@ static int mxl111sf_get_stream_config_mercury_mh(struct dvb_frontend *fe,
 
 static int mxl111sf_streaming_ctrl_mercury_mh(struct dvb_frontend *fe, int onoff)
 {
-	deb_info("%s: fe=%d onoff=%d\n", __func__, fe->id, onoff);
+	pr_debug("%s: fe=%d onoff=%d\n", __func__, fe->id, onoff);
 
 	if (fe->id == 0)
 		return mxl111sf_ep4_streaming_ctrl(fe, onoff);
-- 
cgit v1.2.3-70-g09d2


From 907d109bc212bc1193fb01b5c320e8c9a850bbf4 Mon Sep 17 00:00:00 2001
From: Frank Schaefer <fschaefer.oss@googlemail.com>
Date: Mon, 3 Jun 2013 14:12:02 -0300
Subject: [media] em28xx: extend GPIO register definitions for the em25xx,
 em276x/7x/8x, em2874/174/84
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The em25xx/em276x/7x/8x provides 4 GPIO register sets,
each of them consisting of separate read and a write registers.
The same registers are also used by the em2874/174/84.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/em28xx/em28xx-cards.c | 88 ++++++++++++++++-----------------
 drivers/media/usb/em28xx/em28xx-dvb.c   | 62 +++++++++++------------
 drivers/media/usb/em28xx/em28xx-reg.h   | 15 +++++-
 3 files changed, 89 insertions(+), 76 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index e4b0669d49d..c0b853541f0 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -285,14 +285,14 @@ static struct em28xx_reg_seq dikom_dk300_digital[] = {
 
 /* Reset for the most [digital] boards */
 static struct em28xx_reg_seq leadership_digital[] = {
-	{EM2874_R80_GPIO,	0x70,	0xff,	10},
+	{EM2874_R80_GPIO_P0_CTRL,	0x70,	0xff,	10},
 	{	-1,		-1,	-1,	-1},
 };
 
 static struct em28xx_reg_seq leadership_reset[] = {
-	{EM2874_R80_GPIO,	0xf0,	0xff,	10},
-	{EM2874_R80_GPIO,	0xb0,	0xff,	10},
-	{EM2874_R80_GPIO,	0xf0,	0xff,	10},
+	{EM2874_R80_GPIO_P0_CTRL,	0xf0,	0xff,	10},
+	{EM2874_R80_GPIO_P0_CTRL,	0xb0,	0xff,	10},
+	{EM2874_R80_GPIO_P0_CTRL,	0xf0,	0xff,	10},
 	{	-1,		-1,	-1,	-1},
 };
 
@@ -301,25 +301,25 @@ static struct em28xx_reg_seq leadership_reset[] = {
  * GPIO_7 - LED
  */
 static struct em28xx_reg_seq pctv_290e[] = {
-	{EM2874_R80_GPIO,	0x00,	0xff,		80},
-	{EM2874_R80_GPIO,	0x40,	0xff,		80}, /* GPIO_6 = 1 */
-	{EM2874_R80_GPIO,	0xc0,	0xff,		80}, /* GPIO_7 = 1 */
+	{EM2874_R80_GPIO_P0_CTRL,	0x00,	0xff,	80},
+	{EM2874_R80_GPIO_P0_CTRL,	0x40,	0xff,	80}, /* GPIO_6 = 1 */
+	{EM2874_R80_GPIO_P0_CTRL,	0xc0,	0xff,	80}, /* GPIO_7 = 1 */
 	{-1,			-1,	-1,		-1},
 };
 
 #if 0
 static struct em28xx_reg_seq terratec_h5_gpio[] = {
 	{EM28XX_R08_GPIO,	0xff,	0xff,	10},
-	{EM2874_R80_GPIO,	0xf6,	0xff,	100},
-	{EM2874_R80_GPIO,	0xf2,	0xff,	50},
-	{EM2874_R80_GPIO,	0xf6,	0xff,	50},
+	{EM2874_R80_GPIO_P0_CTRL,	0xf6,	0xff,	100},
+	{EM2874_R80_GPIO_P0_CTRL,	0xf2,	0xff,	50},
+	{EM2874_R80_GPIO_P0_CTRL,	0xf6,	0xff,	50},
 	{ -1,			-1,	-1,	-1},
 };
 
 static struct em28xx_reg_seq terratec_h5_digital[] = {
-	{EM2874_R80_GPIO,	0xf6,	0xff,	10},
-	{EM2874_R80_GPIO,	0xe6,	0xff,	100},
-	{EM2874_R80_GPIO,	0xa6,	0xff,	10},
+	{EM2874_R80_GPIO_P0_CTRL,	0xf6,	0xff,	10},
+	{EM2874_R80_GPIO_P0_CTRL,	0xe6,	0xff,	100},
+	{EM2874_R80_GPIO_P0_CTRL,	0xa6,	0xff,	10},
 	{ -1,			-1,	-1,	-1},
 };
 #endif
@@ -335,39 +335,39 @@ static struct em28xx_reg_seq terratec_h5_digital[] = {
  * GPIO_7 - LED (green LED)
  */
 static struct em28xx_reg_seq pctv_460e[] = {
-	{EM2874_R80_GPIO, 0x01, 0xff,  50},
+	{EM2874_R80_GPIO_P0_CTRL, 0x01, 0xff,  50},
 	{0x0d,            0xff, 0xff,  50},
-	{EM2874_R80_GPIO, 0x41, 0xff,  50}, /* GPIO_6=1 */
+	{EM2874_R80_GPIO_P0_CTRL, 0x41, 0xff,  50}, /* GPIO_6=1 */
 	{0x0d,            0x42, 0xff,  50},
-	{EM2874_R80_GPIO, 0x61, 0xff,  50}, /* GPIO_5=1 */
+	{EM2874_R80_GPIO_P0_CTRL, 0x61, 0xff,  50}, /* GPIO_5=1 */
 	{             -1,   -1,   -1,  -1},
 };
 
 static struct em28xx_reg_seq c3tech_digital_duo_digital[] = {
-	{EM2874_R80_GPIO,	0xff,	0xff,	10},
-	{EM2874_R80_GPIO,	0xfd,	0xff,	10}, /* xc5000 reset */
-	{EM2874_R80_GPIO,	0xf9,	0xff,	35},
-	{EM2874_R80_GPIO,	0xfd,	0xff,	10},
-	{EM2874_R80_GPIO,	0xff,	0xff,	10},
-	{EM2874_R80_GPIO,	0xfe,	0xff,	10},
-	{EM2874_R80_GPIO,	0xbe,	0xff,	10},
-	{EM2874_R80_GPIO,	0xfe,	0xff,	20},
+	{EM2874_R80_GPIO_P0_CTRL,	0xff,	0xff,	10},
+	{EM2874_R80_GPIO_P0_CTRL,	0xfd,	0xff,	10}, /* xc5000 reset */
+	{EM2874_R80_GPIO_P0_CTRL,	0xf9,	0xff,	35},
+	{EM2874_R80_GPIO_P0_CTRL,	0xfd,	0xff,	10},
+	{EM2874_R80_GPIO_P0_CTRL,	0xff,	0xff,	10},
+	{EM2874_R80_GPIO_P0_CTRL,	0xfe,	0xff,	10},
+	{EM2874_R80_GPIO_P0_CTRL,	0xbe,	0xff,	10},
+	{EM2874_R80_GPIO_P0_CTRL,	0xfe,	0xff,	20},
 	{ -1,			-1,	-1,	-1},
 };
 
 #if 0
 static struct em28xx_reg_seq hauppauge_930c_gpio[] = {
-	{EM2874_R80_GPIO,	0x6f,	0xff,	10},
-	{EM2874_R80_GPIO,	0x4f,	0xff,	10}, /* xc5000 reset */
-	{EM2874_R80_GPIO,	0x6f,	0xff,	10},
-	{EM2874_R80_GPIO,	0x4f,	0xff,	10},
+	{EM2874_R80_GPIO_P0_CTRL,	0x6f,	0xff,	10},
+	{EM2874_R80_GPIO_P0_CTRL,	0x4f,	0xff,	10}, /* xc5000 reset */
+	{EM2874_R80_GPIO_P0_CTRL,	0x6f,	0xff,	10},
+	{EM2874_R80_GPIO_P0_CTRL,	0x4f,	0xff,	10},
 	{ -1,			-1,	-1,	-1},
 };
 
 static struct em28xx_reg_seq hauppauge_930c_digital[] = {
-	{EM2874_R80_GPIO,	0xf6,	0xff,	10},
-	{EM2874_R80_GPIO,	0xe6,	0xff,	100},
-	{EM2874_R80_GPIO,	0xa6,	0xff,	10},
+	{EM2874_R80_GPIO_P0_CTRL,	0xf6,	0xff,	10},
+	{EM2874_R80_GPIO_P0_CTRL,	0xe6,	0xff,	100},
+	{EM2874_R80_GPIO_P0_CTRL,	0xa6,	0xff,	10},
 	{ -1,			-1,	-1,	-1},
 };
 #endif
@@ -378,9 +378,9 @@ static struct em28xx_reg_seq hauppauge_930c_digital[] = {
  * GPIO_7 - LED, 0=active
  */
 static struct em28xx_reg_seq maxmedia_ub425_tc[] = {
-	{EM2874_R80_GPIO,  0x83,  0xff,  100},
-	{EM2874_R80_GPIO,  0xc3,  0xff,  100}, /* GPIO_6 = 1 */
-	{EM2874_R80_GPIO,  0x43,  0xff,  000}, /* GPIO_7 = 0 */
+	{EM2874_R80_GPIO_P0_CTRL,  0x83,  0xff,  100},
+	{EM2874_R80_GPIO_P0_CTRL,  0xc3,  0xff,  100}, /* GPIO_6 = 1 */
+	{EM2874_R80_GPIO_P0_CTRL,  0x43,  0xff,  000}, /* GPIO_7 = 0 */
 	{-1,                 -1,    -1,   -1},
 };
 
@@ -391,9 +391,9 @@ static struct em28xx_reg_seq maxmedia_ub425_tc[] = {
  * GPIO_7: LED, 1=active
  */
 static struct em28xx_reg_seq pctv_510e[] = {
-	{EM2874_R80_GPIO, 0x10, 0xff, 100},
-	{EM2874_R80_GPIO, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
-	{EM2874_R80_GPIO, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
+	{EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100},
+	{EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
+	{EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
 	{             -1,   -1,   -1,  -1},
 };
 
@@ -404,10 +404,10 @@ static struct em28xx_reg_seq pctv_510e[] = {
  * GPIO_7: LED, 1=active
  */
 static struct em28xx_reg_seq pctv_520e[] = {
-	{EM2874_R80_GPIO, 0x10, 0xff, 100},
-	{EM2874_R80_GPIO, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
-	{EM2874_R80_GPIO, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
-	{EM2874_R80_GPIO, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */
+	{EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100},
+	{EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
+	{EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
+	{EM2874_R80_GPIO_P0_CTRL, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */
 	{             -1,   -1,   -1,  -1},
 };
 
@@ -2947,13 +2947,13 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
 			break;
 		case CHIP_ID_EM2874:
 			chip_name = "em2874";
-			dev->reg_gpio_num = EM2874_R80_GPIO;
+			dev->reg_gpio_num = EM2874_R80_GPIO_P0_CTRL;
 			dev->wait_after_write = 0;
 			dev->eeprom_addrwidth_16bit = 1;
 			break;
 		case CHIP_ID_EM28174:
 			chip_name = "em28174";
-			dev->reg_gpio_num = EM2874_R80_GPIO;
+			dev->reg_gpio_num = EM2874_R80_GPIO_P0_CTRL;
 			dev->wait_after_write = 0;
 			dev->eeprom_addrwidth_16bit = 1;
 			break;
@@ -2963,7 +2963,7 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
 			break;
 		case CHIP_ID_EM2884:
 			chip_name = "em2884";
-			dev->reg_gpio_num = EM2874_R80_GPIO;
+			dev->reg_gpio_num = EM2874_R80_GPIO_P0_CTRL;
 			dev->wait_after_write = 0;
 			dev->eeprom_addrwidth_16bit = 1;
 			break;
diff --git a/drivers/media/usb/em28xx/em28xx-dvb.c b/drivers/media/usb/em28xx/em28xx-dvb.c
index 42ede686ab6..69aed825f58 100644
--- a/drivers/media/usb/em28xx/em28xx-dvb.c
+++ b/drivers/media/usb/em28xx/em28xx-dvb.c
@@ -421,23 +421,23 @@ static void hauppauge_hvr930c_init(struct em28xx *dev)
 	int i;
 
 	struct em28xx_reg_seq hauppauge_hvr930c_init[] = {
-		{EM2874_R80_GPIO,	0xff,	0xff,	0x65},
-		{EM2874_R80_GPIO,	0xfb,	0xff,	0x32},
-		{EM2874_R80_GPIO,	0xff,	0xff,	0xb8},
+		{EM2874_R80_GPIO_P0_CTRL,	0xff,	0xff,	0x65},
+		{EM2874_R80_GPIO_P0_CTRL,	0xfb,	0xff,	0x32},
+		{EM2874_R80_GPIO_P0_CTRL,	0xff,	0xff,	0xb8},
 		{ -1,                   -1,     -1,     -1},
 	};
 	struct em28xx_reg_seq hauppauge_hvr930c_end[] = {
-		{EM2874_R80_GPIO,	0xef,	0xff,	0x01},
-		{EM2874_R80_GPIO,	0xaf,	0xff,	0x65},
-		{EM2874_R80_GPIO,	0xef,	0xff,	0x76},
-		{EM2874_R80_GPIO,	0xef,	0xff,	0x01},
-		{EM2874_R80_GPIO,	0xcf,	0xff,	0x0b},
-		{EM2874_R80_GPIO,	0xef,	0xff,	0x40},
-
-		{EM2874_R80_GPIO,	0xcf,	0xff,	0x65},
-		{EM2874_R80_GPIO,	0xef,	0xff,	0x65},
-		{EM2874_R80_GPIO,	0xcf,	0xff,	0x0b},
-		{EM2874_R80_GPIO,	0xef,	0xff,	0x65},
+		{EM2874_R80_GPIO_P0_CTRL,	0xef,	0xff,	0x01},
+		{EM2874_R80_GPIO_P0_CTRL,	0xaf,	0xff,	0x65},
+		{EM2874_R80_GPIO_P0_CTRL,	0xef,	0xff,	0x76},
+		{EM2874_R80_GPIO_P0_CTRL,	0xef,	0xff,	0x01},
+		{EM2874_R80_GPIO_P0_CTRL,	0xcf,	0xff,	0x0b},
+		{EM2874_R80_GPIO_P0_CTRL,	0xef,	0xff,	0x40},
+
+		{EM2874_R80_GPIO_P0_CTRL,	0xcf,	0xff,	0x65},
+		{EM2874_R80_GPIO_P0_CTRL,	0xef,	0xff,	0x65},
+		{EM2874_R80_GPIO_P0_CTRL,	0xcf,	0xff,	0x0b},
+		{EM2874_R80_GPIO_P0_CTRL,	0xef,	0xff,	0x65},
 
 		{ -1,                   -1,     -1,     -1},
 	};
@@ -488,15 +488,15 @@ static void terratec_h5_init(struct em28xx *dev)
 	int i;
 	struct em28xx_reg_seq terratec_h5_init[] = {
 		{EM28XX_R08_GPIO,	0xff,	0xff,	10},
-		{EM2874_R80_GPIO,	0xf6,	0xff,	100},
-		{EM2874_R80_GPIO,	0xf2,	0xff,	50},
-		{EM2874_R80_GPIO,	0xf6,	0xff,	100},
+		{EM2874_R80_GPIO_P0_CTRL,	0xf6,	0xff,	100},
+		{EM2874_R80_GPIO_P0_CTRL,	0xf2,	0xff,	50},
+		{EM2874_R80_GPIO_P0_CTRL,	0xf6,	0xff,	100},
 		{ -1,                   -1,     -1,     -1},
 	};
 	struct em28xx_reg_seq terratec_h5_end[] = {
-		{EM2874_R80_GPIO,	0xe6,	0xff,	100},
-		{EM2874_R80_GPIO,	0xa6,	0xff,	50},
-		{EM2874_R80_GPIO,	0xe6,	0xff,	100},
+		{EM2874_R80_GPIO_P0_CTRL,	0xe6,	0xff,	100},
+		{EM2874_R80_GPIO_P0_CTRL,	0xa6,	0xff,	50},
+		{EM2874_R80_GPIO_P0_CTRL,	0xe6,	0xff,	100},
 		{ -1,                   -1,     -1,     -1},
 	};
 	struct {
@@ -544,14 +544,14 @@ static void terratec_htc_stick_init(struct em28xx *dev)
 	 */
 	struct em28xx_reg_seq terratec_htc_stick_init[] = {
 		{EM28XX_R08_GPIO,	0xff,	0xff,	10},
-		{EM2874_R80_GPIO,	0xf6,	0xff,	100},
-		{EM2874_R80_GPIO,	0xe6,	0xff,	50},
-		{EM2874_R80_GPIO,	0xf6,	0xff,	100},
+		{EM2874_R80_GPIO_P0_CTRL,	0xf6,	0xff,	100},
+		{EM2874_R80_GPIO_P0_CTRL,	0xe6,	0xff,	50},
+		{EM2874_R80_GPIO_P0_CTRL,	0xf6,	0xff,	100},
 		{ -1,                   -1,     -1,     -1},
 	};
 	struct em28xx_reg_seq terratec_htc_stick_end[] = {
-		{EM2874_R80_GPIO,	0xb6,	0xff,	100},
-		{EM2874_R80_GPIO,	0xf6,	0xff,	50},
+		{EM2874_R80_GPIO_P0_CTRL,	0xb6,	0xff,	100},
+		{EM2874_R80_GPIO_P0_CTRL,	0xf6,	0xff,	50},
 		{ -1,                   -1,     -1,     -1},
 	};
 
@@ -591,15 +591,15 @@ static void terratec_htc_usb_xs_init(struct em28xx *dev)
 
 	struct em28xx_reg_seq terratec_htc_usb_xs_init[] = {
 		{EM28XX_R08_GPIO,	0xff,	0xff,	10},
-		{EM2874_R80_GPIO,	0xb2,	0xff,	100},
-		{EM2874_R80_GPIO,	0xb2,	0xff,	50},
-		{EM2874_R80_GPIO,	0xb6,	0xff,	100},
+		{EM2874_R80_GPIO_P0_CTRL,	0xb2,	0xff,	100},
+		{EM2874_R80_GPIO_P0_CTRL,	0xb2,	0xff,	50},
+		{EM2874_R80_GPIO_P0_CTRL,	0xb6,	0xff,	100},
 		{ -1,                   -1,     -1,     -1},
 	};
 	struct em28xx_reg_seq terratec_htc_usb_xs_end[] = {
-		{EM2874_R80_GPIO,	0xa6,	0xff,	100},
-		{EM2874_R80_GPIO,	0xa6,	0xff,	50},
-		{EM2874_R80_GPIO,	0xe6,	0xff,	100},
+		{EM2874_R80_GPIO_P0_CTRL,	0xa6,	0xff,	100},
+		{EM2874_R80_GPIO_P0_CTRL,	0xa6,	0xff,	50},
+		{EM2874_R80_GPIO_P0_CTRL,	0xe6,	0xff,	100},
 		{ -1,                   -1,     -1,     -1},
 	};
 
diff --git a/drivers/media/usb/em28xx/em28xx-reg.h b/drivers/media/usb/em28xx/em28xx-reg.h
index 622871db04a..0233c5bedc5 100644
--- a/drivers/media/usb/em28xx/em28xx-reg.h
+++ b/drivers/media/usb/em28xx/em28xx-reg.h
@@ -193,7 +193,20 @@
 #define EM2874_R50_IR_CONFIG    0x50
 #define EM2874_R51_IR           0x51
 #define EM2874_R5F_TS_ENABLE    0x5f
-#define EM2874_R80_GPIO         0x80
+
+/* em2874/174/84, em25xx, em276x/7x/8x GPIO registers */
+/*
+ * NOTE: not all ports are bonded out;
+ * Some ports are multiplexed with special function I/O
+ */
+#define EM2874_R80_GPIO_P0_CTRL    0x80
+#define EM2874_R81_GPIO_P1_CTRL    0x81
+#define EM2874_R82_GPIO_P2_CTRL    0x82
+#define EM2874_R83_GPIO_P3_CTRL    0x83
+#define EM2874_R84_GPIO_P0_STATE   0x84
+#define EM2874_R85_GPIO_P1_STATE   0x85
+#define EM2874_R86_GPIO_P2_STATE   0x86
+#define EM2874_R87_GPIO_P3_STATE   0x87
 
 /* em2874 IR config register (0x50) */
 #define EM2874_IR_NEC           0x00
-- 
cgit v1.2.3-70-g09d2


From c074fc4c2990d48acab78d304054a6ff212f3d53 Mon Sep 17 00:00:00 2001
From: Frank Schaefer <fschaefer.oss@googlemail.com>
Date: Mon, 3 Jun 2013 14:12:03 -0300
Subject: [media] em28xx: improve em2820-em2873/83 GPIO port register
 definitions and descriptions
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

- add definition for GPIO register 0x09 (reading/input)
- extend the information the chip variants that support GPIO registers 0x08/0x09
- rename EM28XX_R08_GPIO to EM2820_R08_GPIO_CTRL

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/em28xx/em28xx-cards.c | 128 ++++++++++++++++----------------
 drivers/media/usb/em28xx/em28xx-dvb.c   |   6 +-
 drivers/media/usb/em28xx/em28xx-reg.h   |   5 +-
 3 files changed, 70 insertions(+), 69 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index c0b853541f0..6ee4bed730d 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -82,26 +82,26 @@ static void em28xx_pre_card_setup(struct em28xx *dev);
 
 /* Reset for the most [analog] boards */
 static struct em28xx_reg_seq default_analog[] = {
-	{EM28XX_R08_GPIO,	0x6d,   ~EM_GPIO_4,	10},
+	{EM2820_R08_GPIO_CTRL,	0x6d,   ~EM_GPIO_4,	10},
 	{	-1,		-1,	-1,		-1},
 };
 
 /* Reset for the most [digital] boards */
 static struct em28xx_reg_seq default_digital[] = {
-	{EM28XX_R08_GPIO,	0x6e,	~EM_GPIO_4,	10},
+	{EM2820_R08_GPIO_CTRL,	0x6e,	~EM_GPIO_4,	10},
 	{	-1,		-1,	-1,		-1},
 };
 
 /* Board Hauppauge WinTV HVR 900 analog */
 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
-	{EM28XX_R08_GPIO,	0x2d,	~EM_GPIO_4,	10},
+	{EM2820_R08_GPIO_CTRL,	0x2d,	~EM_GPIO_4,	10},
 	{0x05,			0xff,	0x10,		10},
 	{  -1,			-1,	-1,		-1},
 };
 
 /* Board Hauppauge WinTV HVR 900 digital */
 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
-	{EM28XX_R08_GPIO,	0x2e,	~EM_GPIO_4,	10},
+	{EM2820_R08_GPIO_CTRL,	0x2e,	~EM_GPIO_4,	10},
 	{EM2880_R04_GPO,	0x04,	0x0f,		10},
 	{EM2880_R04_GPO,	0x0c,	0x0f,		10},
 	{ -1,			-1,	-1,		-1},
@@ -109,14 +109,14 @@ static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
 
 /* Board Hauppauge WinTV HVR 900 (R2) digital */
 static struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = {
-	{EM28XX_R08_GPIO,	0x2e,	~EM_GPIO_4,	10},
+	{EM2820_R08_GPIO_CTRL,	0x2e,	~EM_GPIO_4,	10},
 	{EM2880_R04_GPO,	0x0c,	0x0f,		10},
 	{ -1,			-1,	-1,		-1},
 };
 
 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
-	{EM28XX_R08_GPIO,       0x69,   ~EM_GPIO_4,	 10},
+	{EM2820_R08_GPIO_CTRL,       0x69,   ~EM_GPIO_4,	 10},
 	{	-1,		-1,	-1,		 -1},
 };
 
@@ -127,11 +127,11 @@ static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
 
 /* Board - EM2882 Kworld 315U digital */
 static struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
-	{EM28XX_R08_GPIO,	0xff,	0xff,		10},
-	{EM28XX_R08_GPIO,	0xfe,	0xff,		10},
+	{EM2820_R08_GPIO_CTRL,	0xff,	0xff,		10},
+	{EM2820_R08_GPIO_CTRL,	0xfe,	0xff,		10},
 	{EM2880_R04_GPO,	0x04,	0xff,		10},
 	{EM2880_R04_GPO,	0x0c,	0xff,		10},
-	{EM28XX_R08_GPIO,	0x7e,	0xff,		10},
+	{EM2820_R08_GPIO_CTRL,	0x7e,	0xff,		10},
 	{  -1,			-1,	-1,		-1},
 };
 
@@ -144,13 +144,13 @@ static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
 };
 
 static struct em28xx_reg_seq kworld_330u_analog[] = {
-	{EM28XX_R08_GPIO,	0x6d,	~EM_GPIO_4,	10},
+	{EM2820_R08_GPIO_CTRL,	0x6d,	~EM_GPIO_4,	10},
 	{EM2880_R04_GPO,	0x00,	0xff,		10},
 	{ -1,			-1,	-1,		-1},
 };
 
 static struct em28xx_reg_seq kworld_330u_digital[] = {
-	{EM28XX_R08_GPIO,	0x6e,	~EM_GPIO_4,	10},
+	{EM2820_R08_GPIO_CTRL,	0x6e,	~EM_GPIO_4,	10},
 	{EM2880_R04_GPO,	0x08,	0xff,		10},
 	{ -1,			-1,	-1,		-1},
 };
@@ -162,12 +162,12 @@ static struct em28xx_reg_seq kworld_330u_digital[] = {
    GOP3  - s5h1409 reset
  */
 static struct em28xx_reg_seq evga_indtube_analog[] = {
-	{EM28XX_R08_GPIO,	0x79,   0xff,		60},
+	{EM2820_R08_GPIO_CTRL,	0x79,   0xff,		60},
 	{	-1,		-1,	-1,		-1},
 };
 
 static struct em28xx_reg_seq evga_indtube_digital[] = {
-	{EM28XX_R08_GPIO,	0x7a,	0xff,		 1},
+	{EM2820_R08_GPIO_CTRL,	0x7a,	0xff,		 1},
 	{EM2880_R04_GPO,	0x04,	0xff,		10},
 	{EM2880_R04_GPO,	0x0c,	0xff,		 1},
 	{ -1,			-1,	-1,		-1},
@@ -185,31 +185,31 @@ static struct em28xx_reg_seq evga_indtube_digital[] = {
  * EM_GPIO_7 - currently unknown
  */
 static struct em28xx_reg_seq kworld_a340_digital[] = {
-	{EM28XX_R08_GPIO,	0x6d,		~EM_GPIO_4,	10},
+	{EM2820_R08_GPIO_CTRL,	0x6d,		~EM_GPIO_4,	10},
 	{ -1,			-1,		-1,		-1},
 };
 
 /* Pinnacle Hybrid Pro eb1a:2881 */
 static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
-	{EM28XX_R08_GPIO,	0xfd,   ~EM_GPIO_4,	10},
+	{EM2820_R08_GPIO_CTRL,	0xfd,   ~EM_GPIO_4,	10},
 	{	-1,		-1,	-1,		-1},
 };
 
 static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
-	{EM28XX_R08_GPIO,	0x6e,	~EM_GPIO_4,	10},
+	{EM2820_R08_GPIO_CTRL,	0x6e,	~EM_GPIO_4,	10},
 	{EM2880_R04_GPO,	0x04,	0xff,	       100},/* zl10353 reset */
 	{EM2880_R04_GPO,	0x0c,	0xff,		 1},
 	{	-1,		-1,	-1,		-1},
 };
 
 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = {
-	{EM28XX_R08_GPIO,	0x6d,	~EM_GPIO_4,	10},
+	{EM2820_R08_GPIO_CTRL,	0x6d,	~EM_GPIO_4,	10},
 	{EM2880_R04_GPO,	0x00,	0xff,		10},
 	{ -1,			-1,	-1,		-1},
 };
 
 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = {
-	{EM28XX_R08_GPIO,	0x6e,	~EM_GPIO_4,	10},
+	{EM2820_R08_GPIO_CTRL,	0x6e,	~EM_GPIO_4,	10},
 	{EM2880_R04_GPO,	0x08,	0xff,		10},
 	{ -1,			-1,	-1,		-1},
 };
@@ -218,66 +218,66 @@ static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = {
    GPIO4 - CU1216L NIM
    Other GPIOs seems to be don't care. */
 static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = {
-	{EM28XX_R08_GPIO,	0xfe,	0xff,		10},
-	{EM28XX_R08_GPIO,	0xde,	0xff,		10},
-	{EM28XX_R08_GPIO,	0xfe,	0xff,		10},
-	{EM28XX_R08_GPIO,	0xff,	0xff,		10},
-	{EM28XX_R08_GPIO,	0x7f,	0xff,		10},
-	{EM28XX_R08_GPIO,	0x6f,	0xff,		10},
-	{EM28XX_R08_GPIO,	0xff,	0xff,		10},
+	{EM2820_R08_GPIO_CTRL,	0xfe,	0xff,		10},
+	{EM2820_R08_GPIO_CTRL,	0xde,	0xff,		10},
+	{EM2820_R08_GPIO_CTRL,	0xfe,	0xff,		10},
+	{EM2820_R08_GPIO_CTRL,	0xff,	0xff,		10},
+	{EM2820_R08_GPIO_CTRL,	0x7f,	0xff,		10},
+	{EM2820_R08_GPIO_CTRL,	0x6f,	0xff,		10},
+	{EM2820_R08_GPIO_CTRL,	0xff,	0xff,		10},
 	{-1,			-1,	-1,		-1},
 };
 
 /* Callback for the most boards */
 static struct em28xx_reg_seq default_tuner_gpio[] = {
-	{EM28XX_R08_GPIO,	EM_GPIO_4,	EM_GPIO_4,	10},
-	{EM28XX_R08_GPIO,	0,		EM_GPIO_4,	10},
-	{EM28XX_R08_GPIO,	EM_GPIO_4,	EM_GPIO_4,	10},
+	{EM2820_R08_GPIO_CTRL,	EM_GPIO_4,	EM_GPIO_4,	10},
+	{EM2820_R08_GPIO_CTRL,	0,		EM_GPIO_4,	10},
+	{EM2820_R08_GPIO_CTRL,	EM_GPIO_4,	EM_GPIO_4,	10},
 	{  -1,			-1,		-1,		-1},
 };
 
 /* Mute/unmute */
 static struct em28xx_reg_seq compro_unmute_tv_gpio[] = {
-	{EM28XX_R08_GPIO,	5,		7,		10},
+	{EM2820_R08_GPIO_CTRL,	5,		7,		10},
 	{  -1,			-1,		-1,		-1},
 };
 
 static struct em28xx_reg_seq compro_unmute_svid_gpio[] = {
-	{EM28XX_R08_GPIO,	4,		7,		10},
+	{EM2820_R08_GPIO_CTRL,	4,		7,		10},
 	{  -1,			-1,		-1,		-1},
 };
 
 static struct em28xx_reg_seq compro_mute_gpio[] = {
-	{EM28XX_R08_GPIO,	6,		7,		10},
+	{EM2820_R08_GPIO_CTRL,	6,		7,		10},
 	{  -1,			-1,		-1,		-1},
 };
 
 /* Terratec AV350 */
 static struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
-	{EM28XX_R08_GPIO,	0xff,	0x7f,		10},
+	{EM2820_R08_GPIO_CTRL,	0xff,	0x7f,		10},
 	{	-1,		-1,	-1,		-1},
 };
 
 static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
-	{EM28XX_R08_GPIO,	0xff,	0xff,		10},
+	{EM2820_R08_GPIO_CTRL,	0xff,	0xff,		10},
 	{	-1,		-1,	-1,		-1},
 };
 
 static struct em28xx_reg_seq silvercrest_reg_seq[] = {
-	{EM28XX_R08_GPIO,	0xff,	0xff,		10},
-	{EM28XX_R08_GPIO,	0x01,	0xf7,		10},
+	{EM2820_R08_GPIO_CTRL,	0xff,	0xff,		10},
+	{EM2820_R08_GPIO_CTRL,	0x01,	0xf7,		10},
 	{	-1,		-1,	-1,		-1},
 };
 
 static struct em28xx_reg_seq vc211a_enable[] = {
-	{EM28XX_R08_GPIO,	0xff,	0x07,		10},
-	{EM28XX_R08_GPIO,	0xff,	0x0f,		10},
-	{EM28XX_R08_GPIO,	0xff,	0x0b,		10},
+	{EM2820_R08_GPIO_CTRL,	0xff,	0x07,		10},
+	{EM2820_R08_GPIO_CTRL,	0xff,	0x0f,		10},
+	{EM2820_R08_GPIO_CTRL,	0xff,	0x0b,		10},
 	{	-1,		-1,	-1,		-1},
 };
 
 static struct em28xx_reg_seq dikom_dk300_digital[] = {
-	{EM28XX_R08_GPIO,	0x6e,	~EM_GPIO_4,	10},
+	{EM2820_R08_GPIO_CTRL,	0x6e,	~EM_GPIO_4,	10},
 	{EM2880_R04_GPO,	0x08,	0xff,		10},
 	{ -1,			-1,	-1,		-1},
 };
@@ -309,7 +309,7 @@ static struct em28xx_reg_seq pctv_290e[] = {
 
 #if 0
 static struct em28xx_reg_seq terratec_h5_gpio[] = {
-	{EM28XX_R08_GPIO,	0xff,	0xff,	10},
+	{EM2820_R08_GPIO_CTRL,		0xff,	0xff,	10},
 	{EM2874_R80_GPIO_P0_CTRL,	0xf6,	0xff,	100},
 	{EM2874_R80_GPIO_P0_CTRL,	0xf2,	0xff,	50},
 	{EM2874_R80_GPIO_P0_CTRL,	0xf6,	0xff,	50},
@@ -2299,9 +2299,9 @@ static void em28xx_pre_card_setup(struct em28xx *dev)
 		break;
 	case EM2861_BOARD_KWORLD_PVRTV_300U:
 	case EM2880_BOARD_KWORLD_DVB_305U:
-		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x6d);
+		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x6d);
 		msleep(10);
-		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d);
+		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x7d);
 		msleep(10);
 		break;
 	case EM2870_BOARD_COMPRO_VIDEOMATE:
@@ -2311,45 +2311,45 @@ static void em28xx_pre_card_setup(struct em28xx *dev)
 		msleep(10);
 		em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
 		msleep(10);
-		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
+		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
 		mdelay(70);
-		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
+		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc);
 		mdelay(70);
-		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xdc);
+		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xdc);
 		mdelay(70);
-		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
+		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc);
 		mdelay(70);
 		break;
 	case EM2870_BOARD_TERRATEC_XS_MT2060:
 		/* this device needs some gpio writes to get the DVB-T
 		   demod work */
-		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
+		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
 		mdelay(70);
-		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
+		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde);
 		mdelay(70);
-		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
+		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
 		mdelay(70);
 		break;
 	case EM2870_BOARD_PINNACLE_PCTV_DVB:
 		/* this device needs some gpio writes to get the
 		   DVB-T demod work */
-		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
+		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
 		mdelay(70);
-		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
+		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde);
 		mdelay(70);
-		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
+		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
 		mdelay(70);
 		break;
 	case EM2820_BOARD_GADMEI_UTV310:
 	case EM2820_BOARD_MSI_VOX_USB_2:
 		/* enables audio for that devices */
-		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
+		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
 		break;
 
 	case EM2882_BOARD_KWORLD_ATSC_315U:
-		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
+		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff);
 		msleep(10);
-		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
+		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
 		msleep(10);
 		em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
 		msleep(10);
@@ -2375,13 +2375,13 @@ static void em28xx_pre_card_setup(struct em28xx *dev)
 		break;
 
 	case EM2820_BOARD_IODATA_GVMVP_SZ:
-		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
+		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff);
 		msleep(70);
-		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
+		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7);
 		msleep(10);
-		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
+		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
 		msleep(70);
-		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
+		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
 		msleep(70);
 		break;
 	}
@@ -2677,12 +2677,12 @@ static void em28xx_card_setup(struct em28xx *dev)
 	case EM2882_BOARD_KWORLD_ATSC_315U:
 		em28xx_write_reg(dev, 0x0d, 0x42);
 		msleep(10);
-		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
+		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
 		msleep(10);
 		break;
 	case EM2820_BOARD_KWORLD_PVRTV2800RF:
 		/* GPIO enables sound on KWORLD PVR TV 2800RF */
-		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9);
+		em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf9);
 		break;
 	case EM2820_BOARD_UNKNOWN:
 	case EM2800_BOARD_UNKNOWN:
@@ -2898,7 +2898,7 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
 
 	/* Set the default GPO/GPIO for legacy devices */
 	dev->reg_gpo_num = EM2880_R04_GPO;
-	dev->reg_gpio_num = EM28XX_R08_GPIO;
+	dev->reg_gpio_num = EM2820_R08_GPIO_CTRL;
 
 	dev->wait_after_write = 5;
 
@@ -3086,7 +3086,7 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
 
 	if (dev->board.has_msp34xx) {
 		/* Send a reset to other chips via gpio */
-		retval = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
+		retval = em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7);
 		if (retval < 0) {
 			em28xx_errdev("%s: em28xx_write_reg - "
 				      "msp34xx(1) failed! error [%d]\n",
@@ -3095,7 +3095,7 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
 		}
 		msleep(3);
 
-		retval = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
+		retval = em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff);
 		if (retval < 0) {
 			em28xx_errdev("%s: em28xx_write_reg - "
 				      "msp34xx(2) failed! error [%d]\n",
diff --git a/drivers/media/usb/em28xx/em28xx-dvb.c b/drivers/media/usb/em28xx/em28xx-dvb.c
index 69aed825f58..bb1e8dca80c 100644
--- a/drivers/media/usb/em28xx/em28xx-dvb.c
+++ b/drivers/media/usb/em28xx/em28xx-dvb.c
@@ -487,7 +487,7 @@ static void terratec_h5_init(struct em28xx *dev)
 {
 	int i;
 	struct em28xx_reg_seq terratec_h5_init[] = {
-		{EM28XX_R08_GPIO,	0xff,	0xff,	10},
+		{EM2820_R08_GPIO_CTRL,		0xff,	0xff,	10},
 		{EM2874_R80_GPIO_P0_CTRL,	0xf6,	0xff,	100},
 		{EM2874_R80_GPIO_P0_CTRL,	0xf2,	0xff,	50},
 		{EM2874_R80_GPIO_P0_CTRL,	0xf6,	0xff,	100},
@@ -543,7 +543,7 @@ static void terratec_htc_stick_init(struct em28xx *dev)
 	 * 0xb6: unknown (does not affect DVB-T).
 	 */
 	struct em28xx_reg_seq terratec_htc_stick_init[] = {
-		{EM28XX_R08_GPIO,	0xff,	0xff,	10},
+		{EM2820_R08_GPIO_CTRL,		0xff,	0xff,	10},
 		{EM2874_R80_GPIO_P0_CTRL,	0xf6,	0xff,	100},
 		{EM2874_R80_GPIO_P0_CTRL,	0xe6,	0xff,	50},
 		{EM2874_R80_GPIO_P0_CTRL,	0xf6,	0xff,	100},
@@ -590,7 +590,7 @@ static void terratec_htc_usb_xs_init(struct em28xx *dev)
 	int i;
 
 	struct em28xx_reg_seq terratec_htc_usb_xs_init[] = {
-		{EM28XX_R08_GPIO,	0xff,	0xff,	10},
+		{EM2820_R08_GPIO_CTRL,		0xff,	0xff,	10},
 		{EM2874_R80_GPIO_P0_CTRL,	0xb2,	0xff,	100},
 		{EM2874_R80_GPIO_P0_CTRL,	0xb2,	0xff,	50},
 		{EM2874_R80_GPIO_P0_CTRL,	0xb6,	0xff,	100},
diff --git a/drivers/media/usb/em28xx/em28xx-reg.h b/drivers/media/usb/em28xx/em28xx-reg.h
index 0233c5bedc5..af39ddbe01e 100644
--- a/drivers/media/usb/em28xx/em28xx-reg.h
+++ b/drivers/media/usb/em28xx/em28xx-reg.h
@@ -49,8 +49,9 @@
 
 
 /* GPIO/GPO registers */
-#define EM2880_R04_GPO	0x04    /* em2880-em2883 only */
-#define EM28XX_R08_GPIO	0x08	/* em2820 or upper */
+#define EM2880_R04_GPO		0x04    /* em2880-em2883 only */
+#define EM2820_R08_GPIO_CTRL	0x08	/* em2820-em2873/83 only */
+#define EM2820_R09_GPIO_STATE	0x09	/* em2820-em2873/83 only */
 
 #define EM28XX_R06_I2C_CLK	0x06
 
-- 
cgit v1.2.3-70-g09d2


From bc677fff1cde38ce8e14d6a2cb703a9fb134ab98 Mon Sep 17 00:00:00 2001
From: Frank Schaefer <fschaefer.oss@googlemail.com>
Date: Mon, 3 Jun 2013 14:12:04 -0300
Subject: [media] em28xx: move snapshot button bit definition for reg 0x0C from
 em28xx-input.c to em28xx.h
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/em28xx/em28xx-input.c | 1 -
 drivers/media/usb/em28xx/em28xx-reg.h   | 3 ++-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/em28xx/em28xx-input.c b/drivers/media/usb/em28xx/em28xx-input.c
index 466b19d0d76..ea181e4b68c 100644
--- a/drivers/media/usb/em28xx/em28xx-input.c
+++ b/drivers/media/usb/em28xx/em28xx-input.c
@@ -32,7 +32,6 @@
 
 #define EM28XX_SNAPSHOT_KEY KEY_CAMERA
 #define EM28XX_SBUTTON_QUERY_INTERVAL 500
-#define EM28XX_R0C_USBSUSP_SNAPSHOT 0x20
 
 static unsigned int ir_debug;
 module_param(ir_debug, int, 0644);
diff --git a/drivers/media/usb/em28xx/em28xx-reg.h b/drivers/media/usb/em28xx/em28xx-reg.h
index af39ddbe01e..0e047784796 100644
--- a/drivers/media/usb/em28xx/em28xx-reg.h
+++ b/drivers/media/usb/em28xx/em28xx-reg.h
@@ -68,7 +68,8 @@
 
 
 #define EM28XX_R0A_CHIPID	0x0a
-#define EM28XX_R0C_USBSUSP	0x0c	/* */
+#define EM28XX_R0C_USBSUSP	0x0c
+#define   EM28XX_R0C_USBSUSP_SNAPSHOT	0x20 /* 1=button pressed, needs reset */
 
 #define EM28XX_R0E_AUDIOSRC	0x0e
 #define EM28XX_R0F_XCLK	0x0f
-- 
cgit v1.2.3-70-g09d2


From 6914d70ecf53e90814fd6d4c8e413b3a8f708d38 Mon Sep 17 00:00:00 2001
From: Frank Schaefer <fschaefer.oss@googlemail.com>
Date: Mon, 3 Jun 2013 14:12:05 -0300
Subject: [media] em28xx: remove GPIO register caching
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The GPIO register caching is the result of wrong assumptions and incomplete
knowledge about the GPIO registers and their functionality.
Today, we know that it is not needed.
It is also limited to a single register and therefore incomplete (newer chips
are using multiple registers).
Instead of extending the caching, get rid of it, because it has no real
benefits and just bloats/complicates the code.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/em28xx/em28xx-cards.c | 12 ------------
 drivers/media/usb/em28xx/em28xx-core.c  | 27 ++-------------------------
 drivers/media/usb/em28xx/em28xx.h       |  6 ------
 3 files changed, 2 insertions(+), 43 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index 6ee4bed730d..dc65742c4bb 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -2896,10 +2896,6 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
 
 	em28xx_set_model(dev);
 
-	/* Set the default GPO/GPIO for legacy devices */
-	dev->reg_gpo_num = EM2880_R04_GPO;
-	dev->reg_gpio_num = EM2820_R08_GPIO_CTRL;
-
 	dev->wait_after_write = 5;
 
 	/* Based on the Chip ID, set the device configuration */
@@ -2947,13 +2943,11 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
 			break;
 		case CHIP_ID_EM2874:
 			chip_name = "em2874";
-			dev->reg_gpio_num = EM2874_R80_GPIO_P0_CTRL;
 			dev->wait_after_write = 0;
 			dev->eeprom_addrwidth_16bit = 1;
 			break;
 		case CHIP_ID_EM28174:
 			chip_name = "em28174";
-			dev->reg_gpio_num = EM2874_R80_GPIO_P0_CTRL;
 			dev->wait_after_write = 0;
 			dev->eeprom_addrwidth_16bit = 1;
 			break;
@@ -2963,7 +2957,6 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
 			break;
 		case CHIP_ID_EM2884:
 			chip_name = "em2884";
-			dev->reg_gpio_num = EM2874_R80_GPIO_P0_CTRL;
 			dev->wait_after_write = 0;
 			dev->eeprom_addrwidth_16bit = 1;
 			break;
@@ -2992,11 +2985,6 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
 		return 0;
 	}
 
-	/* Prepopulate cached GPO register content */
-	retval = em28xx_read_reg(dev, dev->reg_gpo_num);
-	if (retval >= 0)
-		dev->reg_gpo = retval;
-
 	em28xx_pre_card_setup(dev);
 
 	if (!dev->board.is_em2800) {
diff --git a/drivers/media/usb/em28xx/em28xx-core.c b/drivers/media/usb/em28xx/em28xx-core.c
index a802128ce9c..fc157af5234 100644
--- a/drivers/media/usb/em28xx/em28xx-core.c
+++ b/drivers/media/usb/em28xx/em28xx-core.c
@@ -193,23 +193,7 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
 
 int em28xx_write_regs(struct em28xx *dev, u16 reg, char *buf, int len)
 {
-	int rc;
-
-	rc = em28xx_write_regs_req(dev, USB_REQ_GET_STATUS, reg, buf, len);
-
-	/* Stores GPO/GPIO values at the cache, if changed
-	   Only write values should be stored, since input on a GPIO
-	   register will return the input bits.
-	   Not sure what happens on reading GPO register.
-	 */
-	if (rc >= 0) {
-		if (reg == dev->reg_gpo_num)
-			dev->reg_gpo = buf[0];
-		else if (reg == dev->reg_gpio_num)
-			dev->reg_gpio = buf[0];
-	}
-
-	return rc;
+	return em28xx_write_regs_req(dev, USB_REQ_GET_STATUS, reg, buf, len);
 }
 EXPORT_SYMBOL_GPL(em28xx_write_regs);
 
@@ -231,14 +215,7 @@ int em28xx_write_reg_bits(struct em28xx *dev, u16 reg, u8 val,
 	int oldval;
 	u8 newval;
 
-	/* Uses cache for gpo/gpio registers */
-	if (reg == dev->reg_gpo_num)
-		oldval = dev->reg_gpo;
-	else if (reg == dev->reg_gpio_num)
-		oldval = dev->reg_gpio;
-	else
-		oldval = em28xx_read_reg(dev, reg);
-
+	oldval = em28xx_read_reg(dev, reg);
 	if (oldval < 0)
 		return oldval;
 
diff --git a/drivers/media/usb/em28xx/em28xx.h b/drivers/media/usb/em28xx/em28xx.h
index 59a95802aa6..205e9038b1c 100644
--- a/drivers/media/usb/em28xx/em28xx.h
+++ b/drivers/media/usb/em28xx/em28xx.h
@@ -637,12 +637,6 @@ struct em28xx {
 
 	enum em28xx_mode mode;
 
-	/* register numbers for GPO/GPIO registers */
-	u16 reg_gpo_num, reg_gpio_num;
-
-	/* Caches GPO and GPIO registers */
-	unsigned char	reg_gpo, reg_gpio;
-
 	/* Snapshot button */
 	char snapshot_button_path[30];	/* path of the input dev */
 	struct input_dev *sbutton_input_dev;
-- 
cgit v1.2.3-70-g09d2


From 6ec19898ed6990baa285b8c96a8b1a0d0366bc46 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hans.verkuil@cisco.com>
Date: Sun, 26 May 2013 08:24:00 -0300
Subject: [media] v4l2: remove obsolete v4l2_chip_match_host()

This function is no longer needed since it is now the responsibility of the
v4l2 core to check if the DBG_G/S_REGISTER and DBG_G_CHIP_INFO ioctls are
called for the bridge driver or not.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/usbvision/usbvision-video.c |  4 ----
 drivers/media/v4l2-core/v4l2-common.c         | 11 -----------
 include/media/v4l2-common.h                   |  1 -
 3 files changed, 16 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/usbvision/usbvision-video.c b/drivers/media/usb/usbvision/usbvision-video.c
index 7ad872a3e31..f0a0b7f2da9 100644
--- a/drivers/media/usb/usbvision/usbvision-video.c
+++ b/drivers/media/usb/usbvision/usbvision-video.c
@@ -467,8 +467,6 @@ static int vidioc_g_register(struct file *file, void *priv,
 	struct usb_usbvision *usbvision = video_drvdata(file);
 	int err_code;
 
-	if (!v4l2_chip_match_host(&reg->match))
-		return -EINVAL;
 	/* NT100x has a 8-bit register space */
 	err_code = usbvision_read_reg(usbvision, reg->reg&0xff);
 	if (err_code < 0) {
@@ -488,8 +486,6 @@ static int vidioc_s_register(struct file *file, void *priv,
 	struct usb_usbvision *usbvision = video_drvdata(file);
 	int err_code;
 
-	if (!v4l2_chip_match_host(&reg->match))
-		return -EINVAL;
 	/* NT100x has a 8-bit register space */
 	err_code = usbvision_write_reg(usbvision, reg->reg & 0xff, reg->val);
 	if (err_code < 0) {
diff --git a/drivers/media/v4l2-core/v4l2-common.c b/drivers/media/v4l2-core/v4l2-common.c
index 3fed63f4e02..5fd76609e61 100644
--- a/drivers/media/v4l2-core/v4l2-common.c
+++ b/drivers/media/v4l2-core/v4l2-common.c
@@ -227,17 +227,6 @@ u32 v4l2_ctrl_next(const u32 * const * ctrl_classes, u32 id)
 }
 EXPORT_SYMBOL(v4l2_ctrl_next);
 
-int v4l2_chip_match_host(const struct v4l2_dbg_match *match)
-{
-	switch (match->type) {
-	case V4L2_CHIP_MATCH_BRIDGE:
-		return match->addr == 0;
-	default:
-		return 0;
-	}
-}
-EXPORT_SYMBOL(v4l2_chip_match_host);
-
 #if IS_ENABLED(CONFIG_I2C)
 int v4l2_chip_match_i2c_client(struct i2c_client *c, const struct v4l2_dbg_match *match)
 {
diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
index 1d93c48cb37..e7821fb3cd8 100644
--- a/include/media/v4l2-common.h
+++ b/include/media/v4l2-common.h
@@ -106,7 +106,6 @@ struct i2c_client; /* forward reference */
 int v4l2_chip_match_i2c_client(struct i2c_client *c, const struct v4l2_dbg_match *match);
 int v4l2_chip_ident_i2c_client(struct i2c_client *c, struct v4l2_dbg_chip_ident *chip,
 		u32 ident, u32 revision);
-int v4l2_chip_match_host(const struct v4l2_dbg_match *match);
 
 /* ------------------------------------------------------------------------- */
 
-- 
cgit v1.2.3-70-g09d2


From f1741fa8dd4a561e883cf60f103c40eda8790d80 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hans.verkuil@cisco.com>
Date: Wed, 12 Jun 2013 05:46:30 -0300
Subject: [media] sn9c102_core: add v4l2_device and replace parent with
 v4l2_dev

This driver did not yet support struct v4l2_device, so add it. This
make it possible to replace the deprecated parent field with the
v4l2_dev field, allowing the eventual removal of the parent field.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/sn9c102/sn9c102.h      |  3 +++
 drivers/media/usb/sn9c102/sn9c102_core.c | 13 ++++++++++++-
 2 files changed, 15 insertions(+), 1 deletion(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/sn9c102/sn9c102.h b/drivers/media/usb/sn9c102/sn9c102.h
index 2bc153e869b..8a917f06050 100644
--- a/drivers/media/usb/sn9c102/sn9c102.h
+++ b/drivers/media/usb/sn9c102/sn9c102.h
@@ -25,6 +25,7 @@
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
 #include <linux/device.h>
 #include <linux/list.h>
 #include <linux/spinlock.h>
@@ -100,6 +101,8 @@ static DECLARE_RWSEM(sn9c102_dev_lock);
 struct sn9c102_device {
 	struct video_device* v4ldev;
 
+	struct v4l2_device v4l2_dev;
+
 	enum sn9c102_bridge bridge;
 	struct sn9c102_sensor sensor;
 
diff --git a/drivers/media/usb/sn9c102/sn9c102_core.c b/drivers/media/usb/sn9c102/sn9c102_core.c
index c957e9aa607..2cb44de2b92 100644
--- a/drivers/media/usb/sn9c102/sn9c102_core.c
+++ b/drivers/media/usb/sn9c102/sn9c102_core.c
@@ -1737,6 +1737,7 @@ static void sn9c102_release_resources(struct kref *kref)
 	    video_device_node_name(cam->v4ldev));
 	video_set_drvdata(cam->v4ldev, NULL);
 	video_unregister_device(cam->v4ldev);
+	v4l2_device_unregister(&cam->v4l2_dev);
 	usb_put_dev(cam->usbdev);
 	kfree(cam->control_buffer);
 	kfree(cam);
@@ -3254,6 +3255,13 @@ sn9c102_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
 
 	cam->usbdev = udev;
 
+	/* register v4l2_device early so it can be used for printks */
+	if (v4l2_device_register(&intf->dev, &cam->v4l2_dev)) {
+		dev_err(&intf->dev, "v4l2_device_register failed\n");
+		err = -ENOMEM;
+		goto fail;
+	}
+
 	if (!(cam->control_buffer = kzalloc(8, GFP_KERNEL))) {
 		DBG(1, "kzalloc() failed");
 		err = -ENOMEM;
@@ -3325,7 +3333,7 @@ sn9c102_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
 	strcpy(cam->v4ldev->name, "SN9C1xx PC Camera");
 	cam->v4ldev->fops = &sn9c102_fops;
 	cam->v4ldev->release = video_device_release;
-	cam->v4ldev->parent = &udev->dev;
+	cam->v4ldev->v4l2_dev = &cam->v4l2_dev;
 
 	init_completion(&cam->probe);
 
@@ -3377,6 +3385,7 @@ fail:
 		kfree(cam->control_buffer);
 		if (cam->v4ldev)
 			video_device_release(cam->v4ldev);
+		v4l2_device_unregister(&cam->v4l2_dev);
 		kfree(cam);
 	}
 	return err;
@@ -3407,6 +3416,8 @@ static void sn9c102_usb_disconnect(struct usb_interface* intf)
 
 	wake_up_interruptible_all(&cam->wait_open);
 
+	v4l2_device_disconnect(&cam->v4l2_dev);
+
 	kref_put(&cam->kref, sn9c102_release_resources);
 
 	up_write(&sn9c102_dev_lock);
-- 
cgit v1.2.3-70-g09d2


From a28fbd04facbffe9374f25c3a19c54ce4f186361 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hans.verkuil@cisco.com>
Date: Mon, 10 Jun 2013 09:16:25 -0300
Subject: [media] pvrusb2: use v4l2_dev instead of the deprecated parent field

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/pvrusb2/pvrusb2-hdw.c  | 4 ++++
 drivers/media/usb/pvrusb2/pvrusb2-hdw.h  | 4 ++++
 drivers/media/usb/pvrusb2/pvrusb2-v4l2.c | 7 ++++---
 3 files changed, 12 insertions(+), 3 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
index d3292092966..c4d51d78f83 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
@@ -2704,6 +2704,10 @@ static void pvr2_hdw_remove_usb_stuff(struct pvr2_hdw *hdw)
 	pvr2_hdw_render_useless(hdw);
 }
 
+void pvr2_hdw_set_v4l2_dev(struct pvr2_hdw *hdw, struct video_device *vdev)
+{
+	vdev->v4l2_dev = &hdw->v4l2_dev;
+}
 
 /* Destroy hardware interaction structure */
 void pvr2_hdw_destroy(struct pvr2_hdw *hdw)
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-hdw.h b/drivers/media/usb/pvrusb2/pvrusb2-hdw.h
index 1a135cf6ae4..41847076f51 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-hdw.h
+++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.h
@@ -22,6 +22,7 @@
 
 #include <linux/usb.h>
 #include <linux/videodev2.h>
+#include <media/v4l2-dev.h>
 #include "pvrusb2-io.h"
 #include "pvrusb2-ctrl.h"
 
@@ -138,6 +139,9 @@ const char *pvr2_hdw_get_device_identifier(struct pvr2_hdw *);
 /* Called when hardware has been unplugged */
 void pvr2_hdw_disconnect(struct pvr2_hdw *);
 
+/* Sets v4l2_dev of a video_device struct */
+void pvr2_hdw_set_v4l2_dev(struct pvr2_hdw *, struct video_device *);
+
 /* Get the number of defined controls */
 unsigned int pvr2_hdw_get_ctrl_count(struct pvr2_hdw *);
 
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c b/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
index 82f619ba5cc..d77069e12dc 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
@@ -31,6 +31,7 @@
 #include <linux/videodev2.h>
 #include <linux/module.h>
 #include <media/v4l2-dev.h>
+#include <media/v4l2-device.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
 
@@ -870,8 +871,8 @@ static void pvr2_v4l2_dev_destroy(struct pvr2_v4l2_dev *dip)
 static void pvr2_v4l2_dev_disassociate_parent(struct pvr2_v4l2_dev *dip)
 {
 	if (!dip) return;
-	if (!dip->devbase.parent) return;
-	dip->devbase.parent = NULL;
+	if (!dip->devbase.v4l2_dev->dev) return;
+	dip->devbase.v4l2_dev->dev = NULL;
 	device_move(&dip->devbase.dev, NULL, DPM_ORDER_NONE);
 }
 
@@ -1321,7 +1322,7 @@ static void pvr2_v4l2_dev_init(struct pvr2_v4l2_dev *dip,
 	if (nr_ptr && (unit_number >= 0) && (unit_number < PVR_NUM)) {
 		mindevnum = nr_ptr[unit_number];
 	}
-	dip->devbase.parent = &usbdev->dev;
+	pvr2_hdw_set_v4l2_dev(hdw, &dip->devbase);
 	if ((video_register_device(&dip->devbase,
 				   dip->v4l_type, mindevnum) < 0) &&
 	    (video_register_device(&dip->devbase,
-- 
cgit v1.2.3-70-g09d2


From 746cb2c31f7d88bac5453e3af45d95670a00ffe8 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Fri, 21 Jun 2013 11:19:10 -0300
Subject: [media] pvrusb2: Remove unused variable

drivers/media/usb/pvrusb2/pvrusb2-v4l2.c: In function 'pvr2_v4l2_dev_init':
drivers/media/usb/pvrusb2/pvrusb2-v4l2.c:1268:21: warning: variable 'usbdev' set but not used [-Wunused-but-set-variable]

This warning is due to changeset a28fbd04facb, with removed the
usage of usbdev inside pvr2_v4l2_dev_init().

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Mike Isely <isely@pobox.com>
---
 drivers/media/usb/pvrusb2/pvrusb2-v4l2.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c b/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
index d77069e12dc..7c280f35eea 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
@@ -1265,7 +1265,6 @@ static void pvr2_v4l2_dev_init(struct pvr2_v4l2_dev *dip,
 			       struct pvr2_v4l2 *vp,
 			       int v4l_type)
 {
-	struct usb_device *usbdev;
 	int mindevnum;
 	int unit_number;
 	struct pvr2_hdw *hdw;
@@ -1273,7 +1272,6 @@ static void pvr2_v4l2_dev_init(struct pvr2_v4l2_dev *dip,
 	dip->v4lp = vp;
 
 	hdw = vp->channel.mc_head->hdw;
-	usbdev = pvr2_hdw_get_dev(hdw);
 	dip->v4l_type = v4l_type;
 	switch (v4l_type) {
 	case VFL_TYPE_GRABBER:
-- 
cgit v1.2.3-70-g09d2


From 090c65b694c362adb19ec9c27de216a808ee443c Mon Sep 17 00:00:00 2001
From: Alexey Khoroshilov <khoroshilov@ispras.ru>
Date: Mon, 10 Jun 2013 17:32:29 -0300
Subject: [media] usbvision-video: fix memory leak of alt_max_pkt_size

1. usbvision->alt_max_pkt_size is not deallocated anywhere.
2. if allocation of usbvision->alt_max_pkt_size fails,
there is no proper deallocation of already acquired resources.
The patch adds kfree(usbvision->alt_max_pkt_size) to
usbvision_release() as soon as other deallocations happen there.
It calls usbvision_release() if allocation of
usbvision->alt_max_pkt_size fails as soon as usbvision_release()
is safe to work with incompletely initialized usbvision structure.
Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/usbvision/usbvision-video.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/usbvision/usbvision-video.c b/drivers/media/usb/usbvision/usbvision-video.c
index f0a0b7f2da9..5c9e3123ad2 100644
--- a/drivers/media/usb/usbvision/usbvision-video.c
+++ b/drivers/media/usb/usbvision/usbvision-video.c
@@ -1460,6 +1460,7 @@ static void usbvision_release(struct usb_usbvision *usbvision)
 
 	usbvision_remove_sysfs(usbvision->vdev);
 	usbvision_unregister_video(usbvision);
+	kfree(usbvision->alt_max_pkt_size);
 
 	usb_free_urb(usbvision->ctrl_urb);
 
@@ -1575,6 +1576,7 @@ static int usbvision_probe(struct usb_interface *intf,
 	usbvision->alt_max_pkt_size = kmalloc(32 * usbvision->num_alt, GFP_KERNEL);
 	if (usbvision->alt_max_pkt_size == NULL) {
 		dev_err(&intf->dev, "usbvision: out of memory!\n");
+		usbvision_release(usbvision);
 		return -ENOMEM;
 	}
 
-- 
cgit v1.2.3-70-g09d2


From f3d27f34fdd7701e499617d2c1d94480a98f6d07 Mon Sep 17 00:00:00 2001
From: Lubomir Rintel <lkundrak@v3.sk>
Date: Mon, 17 Jun 2013 10:29:06 -0300
Subject: [media] usbtv: Add driver for Fushicai USBTV007 video frame grabber

Reverse-engineered driver for cheapo video digitizer, made from observations of
Windows XP driver. The protocol is not yet completely understood, so far we
don't provide any controls, only support a single format out of three and don't
support the audio device.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/Kconfig        |   1 +
 drivers/media/usb/Makefile       |   1 +
 drivers/media/usb/usbtv/Kconfig  |  10 +
 drivers/media/usb/usbtv/Makefile |   1 +
 drivers/media/usb/usbtv/usbtv.c  | 696 +++++++++++++++++++++++++++++++++++++++
 5 files changed, 709 insertions(+)
 create mode 100644 drivers/media/usb/usbtv/Kconfig
 create mode 100644 drivers/media/usb/usbtv/Makefile
 create mode 100644 drivers/media/usb/usbtv/usbtv.c

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/Kconfig b/drivers/media/usb/Kconfig
index 7cac453e34c..cfe8056b91a 100644
--- a/drivers/media/usb/Kconfig
+++ b/drivers/media/usb/Kconfig
@@ -18,6 +18,7 @@ source "drivers/media/usb/zr364xx/Kconfig"
 source "drivers/media/usb/stkwebcam/Kconfig"
 source "drivers/media/usb/s2255/Kconfig"
 source "drivers/media/usb/sn9c102/Kconfig"
+source "drivers/media/usb/usbtv/Kconfig"
 endif
 
 if MEDIA_ANALOG_TV_SUPPORT
diff --git a/drivers/media/usb/Makefile b/drivers/media/usb/Makefile
index 7f51d7e5f73..0935f47497a 100644
--- a/drivers/media/usb/Makefile
+++ b/drivers/media/usb/Makefile
@@ -20,3 +20,4 @@ obj-$(CONFIG_VIDEO_STK1160) += stk1160/
 obj-$(CONFIG_VIDEO_CX231XX) += cx231xx/
 obj-$(CONFIG_VIDEO_TM6000) += tm6000/
 obj-$(CONFIG_VIDEO_EM28XX) += em28xx/
+obj-$(CONFIG_VIDEO_USBTV) += usbtv/
diff --git a/drivers/media/usb/usbtv/Kconfig b/drivers/media/usb/usbtv/Kconfig
new file mode 100644
index 00000000000..8864436464b
--- /dev/null
+++ b/drivers/media/usb/usbtv/Kconfig
@@ -0,0 +1,10 @@
+config VIDEO_USBTV
+        tristate "USBTV007 video capture support"
+        depends on VIDEO_DEV
+        select VIDEOBUF2_VMALLOC
+
+        ---help---
+          This is a video4linux2 driver for USBTV007 based video capture devices.
+
+          To compile this driver as a module, choose M here: the
+          module will be called usbtv
diff --git a/drivers/media/usb/usbtv/Makefile b/drivers/media/usb/usbtv/Makefile
new file mode 100644
index 00000000000..28b872fa94e
--- /dev/null
+++ b/drivers/media/usb/usbtv/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_VIDEO_USBTV) += usbtv.o
diff --git a/drivers/media/usb/usbtv/usbtv.c b/drivers/media/usb/usbtv/usbtv.c
new file mode 100644
index 00000000000..bf43f874685
--- /dev/null
+++ b/drivers/media/usb/usbtv/usbtv.c
@@ -0,0 +1,696 @@
+/*
+ * Fushicai USBTV007 Video Grabber Driver
+ *
+ * Product web site:
+ * http://www.fushicai.com/products_detail/&productId=d05449ee-b690-42f9-a661-aa7353894bed.html
+ *
+ * Following LWN articles were very useful in construction of this driver:
+ * Video4Linux2 API series: http://lwn.net/Articles/203924/
+ * videobuf2 API explanation: http://lwn.net/Articles/447435/
+ * Thanks go to Jonathan Corbet for providing this quality documentation.
+ * He is awesome.
+ *
+ * Copyright (c) 2013 Lubomir Rintel
+ * All rights reserved.
+ * No physical hardware was harmed running Windows during the
+ * reverse-engineering activity
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL").
+ */
+
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/version.h>
+#include <linux/videodev2.h>
+
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/videobuf2-core.h>
+#include <media/videobuf2-vmalloc.h>
+
+/* Hardware. */
+#define USBTV_VIDEO_ENDP	0x81
+#define USBTV_BASE		0xc000
+#define USBTV_REQUEST_REG	12
+
+/* Number of concurrent isochronous urbs submitted.
+ * Higher numbers was seen to overly saturate the USB bus. */
+#define USBTV_ISOC_TRANSFERS	16
+#define USBTV_ISOC_PACKETS	8
+
+#define USBTV_WIDTH		720
+#define USBTV_HEIGHT		480
+
+#define USBTV_CHUNK_SIZE	256
+#define USBTV_CHUNK		240
+#define USBTV_CHUNKS		(USBTV_WIDTH * USBTV_HEIGHT \
+					/ 2 / USBTV_CHUNK)
+
+/* Chunk header. */
+#define USBTV_MAGIC_OK(chunk)	((be32_to_cpu(chunk[0]) & 0xff000000) \
+							== 0x88000000)
+#define USBTV_FRAME_ID(chunk)	((be32_to_cpu(chunk[0]) & 0x00ff0000) >> 16)
+#define USBTV_ODD(chunk)	((be32_to_cpu(chunk[0]) & 0x0000f000) >> 15)
+#define USBTV_CHUNK_NO(chunk)	(be32_to_cpu(chunk[0]) & 0x00000fff)
+
+/* A single videobuf2 frame buffer. */
+struct usbtv_buf {
+	struct vb2_buffer vb;
+	struct list_head list;
+};
+
+/* Per-device structure. */
+struct usbtv {
+	struct device *dev;
+	struct usb_device *udev;
+	struct v4l2_device v4l2_dev;
+	struct video_device vdev;
+	struct vb2_queue vb2q;
+	struct mutex v4l2_lock;
+	struct mutex vb2q_lock;
+
+	/* List of videobuf2 buffers protected by a lock. */
+	spinlock_t buflock;
+	struct list_head bufs;
+
+	/* Number of currently processed frame, useful find
+	 * out when a new one begins. */
+	u32 frame_id;
+
+	int iso_size;
+	unsigned int sequence;
+	struct urb *isoc_urbs[USBTV_ISOC_TRANSFERS];
+};
+
+static int usbtv_setup_capture(struct usbtv *usbtv)
+{
+	int ret;
+	int pipe = usb_rcvctrlpipe(usbtv->udev, 0);
+	int i;
+	static const u16 protoregs[][2] = {
+		/* These seem to enable the device. */
+		{ USBTV_BASE + 0x0008, 0x0001 },
+		{ USBTV_BASE + 0x01d0, 0x00ff },
+		{ USBTV_BASE + 0x01d9, 0x0002 },
+
+		/* These seem to influence color parameters, such as
+		 * brightness, etc. */
+		{ USBTV_BASE + 0x0239, 0x0040 },
+		{ USBTV_BASE + 0x0240, 0x0000 },
+		{ USBTV_BASE + 0x0241, 0x0000 },
+		{ USBTV_BASE + 0x0242, 0x0002 },
+		{ USBTV_BASE + 0x0243, 0x0080 },
+		{ USBTV_BASE + 0x0244, 0x0012 },
+		{ USBTV_BASE + 0x0245, 0x0090 },
+		{ USBTV_BASE + 0x0246, 0x0000 },
+
+		{ USBTV_BASE + 0x0278, 0x002d },
+		{ USBTV_BASE + 0x0279, 0x000a },
+		{ USBTV_BASE + 0x027a, 0x0032 },
+		{ 0xf890, 0x000c },
+		{ 0xf894, 0x0086 },
+
+		{ USBTV_BASE + 0x00ac, 0x00c0 },
+		{ USBTV_BASE + 0x00ad, 0x0000 },
+		{ USBTV_BASE + 0x00a2, 0x0012 },
+		{ USBTV_BASE + 0x00a3, 0x00e0 },
+		{ USBTV_BASE + 0x00a4, 0x0028 },
+		{ USBTV_BASE + 0x00a5, 0x0082 },
+		{ USBTV_BASE + 0x00a7, 0x0080 },
+		{ USBTV_BASE + 0x0000, 0x0014 },
+		{ USBTV_BASE + 0x0006, 0x0003 },
+		{ USBTV_BASE + 0x0090, 0x0099 },
+		{ USBTV_BASE + 0x0091, 0x0090 },
+		{ USBTV_BASE + 0x0094, 0x0068 },
+		{ USBTV_BASE + 0x0095, 0x0070 },
+		{ USBTV_BASE + 0x009c, 0x0030 },
+		{ USBTV_BASE + 0x009d, 0x00c0 },
+		{ USBTV_BASE + 0x009e, 0x00e0 },
+		{ USBTV_BASE + 0x0019, 0x0006 },
+		{ USBTV_BASE + 0x008c, 0x00ba },
+		{ USBTV_BASE + 0x0101, 0x00ff },
+		{ USBTV_BASE + 0x010c, 0x00b3 },
+		{ USBTV_BASE + 0x01b2, 0x0080 },
+		{ USBTV_BASE + 0x01b4, 0x00a0 },
+		{ USBTV_BASE + 0x014c, 0x00ff },
+		{ USBTV_BASE + 0x014d, 0x00ca },
+		{ USBTV_BASE + 0x0113, 0x0053 },
+		{ USBTV_BASE + 0x0119, 0x008a },
+		{ USBTV_BASE + 0x013c, 0x0003 },
+		{ USBTV_BASE + 0x0150, 0x009c },
+		{ USBTV_BASE + 0x0151, 0x0071 },
+		{ USBTV_BASE + 0x0152, 0x00c6 },
+		{ USBTV_BASE + 0x0153, 0x0084 },
+		{ USBTV_BASE + 0x0154, 0x00bc },
+		{ USBTV_BASE + 0x0155, 0x00a0 },
+		{ USBTV_BASE + 0x0156, 0x00a0 },
+		{ USBTV_BASE + 0x0157, 0x009c },
+		{ USBTV_BASE + 0x0158, 0x001f },
+		{ USBTV_BASE + 0x0159, 0x0006 },
+		{ USBTV_BASE + 0x015d, 0x0000 },
+
+		{ USBTV_BASE + 0x0284, 0x0088 },
+		{ USBTV_BASE + 0x0003, 0x0004 },
+		{ USBTV_BASE + 0x001a, 0x0079 },
+		{ USBTV_BASE + 0x0100, 0x00d3 },
+		{ USBTV_BASE + 0x010e, 0x0068 },
+		{ USBTV_BASE + 0x010f, 0x009c },
+		{ USBTV_BASE + 0x0112, 0x00f0 },
+		{ USBTV_BASE + 0x0115, 0x0015 },
+		{ USBTV_BASE + 0x0117, 0x0000 },
+		{ USBTV_BASE + 0x0118, 0x00fc },
+		{ USBTV_BASE + 0x012d, 0x0004 },
+		{ USBTV_BASE + 0x012f, 0x0008 },
+		{ USBTV_BASE + 0x0220, 0x002e },
+		{ USBTV_BASE + 0x0225, 0x0008 },
+		{ USBTV_BASE + 0x024e, 0x0002 },
+		{ USBTV_BASE + 0x024f, 0x0001 },
+		{ USBTV_BASE + 0x0254, 0x005f },
+		{ USBTV_BASE + 0x025a, 0x0012 },
+		{ USBTV_BASE + 0x025b, 0x0001 },
+		{ USBTV_BASE + 0x0263, 0x001c },
+		{ USBTV_BASE + 0x0266, 0x0011 },
+		{ USBTV_BASE + 0x0267, 0x0005 },
+		{ USBTV_BASE + 0x024e, 0x0002 },
+		{ USBTV_BASE + 0x024f, 0x0002 },
+	};
+
+	for (i = 0; i < ARRAY_SIZE(protoregs); i++) {
+		u16 index = protoregs[i][0];
+		u16 value = protoregs[i][1];
+
+		ret = usb_control_msg(usbtv->udev, pipe, USBTV_REQUEST_REG,
+			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			value, index, NULL, 0, 0);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+/* Called for each 256-byte image chunk.
+ * First word identifies the chunk, followed by 240 words of image
+ * data and padding. */
+static void usbtv_image_chunk(struct usbtv *usbtv, u32 *chunk)
+{
+	int frame_id, odd, chunk_no;
+	u32 *frame;
+	struct usbtv_buf *buf;
+	unsigned long flags;
+
+	/* Ignore corrupted lines. */
+	if (!USBTV_MAGIC_OK(chunk))
+		return;
+	frame_id = USBTV_FRAME_ID(chunk);
+	odd = USBTV_ODD(chunk);
+	chunk_no = USBTV_CHUNK_NO(chunk);
+
+	/* Deinterlace. TODO: Use interlaced frame format. */
+	chunk_no = (chunk_no - chunk_no % 3) * 2 + chunk_no % 3;
+	chunk_no += !odd * 3;
+
+	if (chunk_no >= USBTV_CHUNKS)
+		return;
+
+	/* Beginning of a frame. */
+	if (chunk_no == 0)
+		usbtv->frame_id = frame_id;
+
+	spin_lock_irqsave(&usbtv->buflock, flags);
+	if (list_empty(&usbtv->bufs)) {
+		/* No free buffers. Userspace likely too slow. */
+		spin_unlock_irqrestore(&usbtv->buflock, flags);
+		return;
+	}
+
+	/* First available buffer. */
+	buf = list_first_entry(&usbtv->bufs, struct usbtv_buf, list);
+	frame = vb2_plane_vaddr(&buf->vb, 0);
+
+	/* Copy the chunk. */
+	memcpy(&frame[chunk_no * USBTV_CHUNK], &chunk[1],
+			USBTV_CHUNK * sizeof(chunk[1]));
+
+	/* Last chunk in a frame, signalling an end */
+	if (usbtv->frame_id && chunk_no == USBTV_CHUNKS-1) {
+		int size = vb2_plane_size(&buf->vb, 0);
+
+		buf->vb.v4l2_buf.field = V4L2_FIELD_INTERLACED;
+		buf->vb.v4l2_buf.sequence = usbtv->sequence++;
+		v4l2_get_timestamp(&buf->vb.v4l2_buf.timestamp);
+		vb2_set_plane_payload(&buf->vb, 0, size);
+		vb2_buffer_done(&buf->vb, VB2_BUF_STATE_DONE);
+		list_del(&buf->list);
+	}
+
+	spin_unlock_irqrestore(&usbtv->buflock, flags);
+}
+
+/* Got image data. Each packet contains a number of 256-word chunks we
+ * compose the image from. */
+static void usbtv_iso_cb(struct urb *ip)
+{
+	int ret;
+	int i;
+	struct usbtv *usbtv = (struct usbtv *)ip->context;
+
+	switch (ip->status) {
+	/* All fine. */
+	case 0:
+		break;
+	/* Device disconnected or capture stopped? */
+	case -ENODEV:
+	case -ENOENT:
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		return;
+	/* Unknown error. Retry. */
+	default:
+		dev_warn(usbtv->dev, "Bad response for ISO request.\n");
+		goto resubmit;
+	}
+
+	for (i = 0; i < ip->number_of_packets; i++) {
+		int size = ip->iso_frame_desc[i].actual_length;
+		unsigned char *data = ip->transfer_buffer +
+				ip->iso_frame_desc[i].offset;
+		int offset;
+
+		for (offset = 0; USBTV_CHUNK_SIZE * offset < size; offset++)
+			usbtv_image_chunk(usbtv,
+				(u32 *)&data[USBTV_CHUNK_SIZE * offset]);
+	}
+
+resubmit:
+	ret = usb_submit_urb(ip, GFP_ATOMIC);
+	if (ret < 0)
+		dev_warn(usbtv->dev, "Could not resubmit ISO URB\n");
+}
+
+static struct urb *usbtv_setup_iso_transfer(struct usbtv *usbtv)
+{
+	struct urb *ip;
+	int size = usbtv->iso_size;
+	int i;
+
+	ip = usb_alloc_urb(USBTV_ISOC_PACKETS, GFP_KERNEL);
+	if (ip == NULL)
+		return NULL;
+
+	ip->dev = usbtv->udev;
+	ip->context = usbtv;
+	ip->pipe = usb_rcvisocpipe(usbtv->udev, USBTV_VIDEO_ENDP);
+	ip->interval = 1;
+	ip->transfer_flags = URB_ISO_ASAP;
+	ip->transfer_buffer = kzalloc(size * USBTV_ISOC_PACKETS,
+						GFP_KERNEL);
+	ip->complete = usbtv_iso_cb;
+	ip->number_of_packets = USBTV_ISOC_PACKETS;
+	ip->transfer_buffer_length = size * USBTV_ISOC_PACKETS;
+	for (i = 0; i < USBTV_ISOC_PACKETS; i++) {
+		ip->iso_frame_desc[i].offset = size * i;
+		ip->iso_frame_desc[i].length = size;
+	}
+
+	return ip;
+}
+
+static void usbtv_stop(struct usbtv *usbtv)
+{
+	int i;
+	unsigned long flags;
+
+	/* Cancel running transfers. */
+	for (i = 0; i < USBTV_ISOC_TRANSFERS; i++) {
+		struct urb *ip = usbtv->isoc_urbs[i];
+		if (ip == NULL)
+			continue;
+		usb_kill_urb(ip);
+		kfree(ip->transfer_buffer);
+		usb_free_urb(ip);
+		usbtv->isoc_urbs[i] = NULL;
+	}
+
+	/* Return buffers to userspace. */
+	spin_lock_irqsave(&usbtv->buflock, flags);
+	while (!list_empty(&usbtv->bufs)) {
+		struct usbtv_buf *buf = list_first_entry(&usbtv->bufs,
+						struct usbtv_buf, list);
+		vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
+		list_del(&buf->list);
+	}
+	spin_unlock_irqrestore(&usbtv->buflock, flags);
+}
+
+static int usbtv_start(struct usbtv *usbtv)
+{
+	int i;
+	int ret;
+
+	ret = usb_set_interface(usbtv->udev, 0, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = usbtv_setup_capture(usbtv);
+	if (ret < 0)
+		return ret;
+
+	ret = usb_set_interface(usbtv->udev, 0, 1);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < USBTV_ISOC_TRANSFERS; i++) {
+		struct urb *ip;
+
+		ip = usbtv_setup_iso_transfer(usbtv);
+		if (ip == NULL) {
+			ret = -ENOMEM;
+			goto start_fail;
+		}
+		usbtv->isoc_urbs[i] = ip;
+
+		ret = usb_submit_urb(ip, GFP_KERNEL);
+		if (ret < 0)
+			goto start_fail;
+	}
+
+	return 0;
+
+start_fail:
+	usbtv_stop(usbtv);
+	return ret;
+}
+
+struct usb_device_id usbtv_id_table[] = {
+	{ USB_DEVICE(0x1b71, 0x3002) },
+	{}
+};
+MODULE_DEVICE_TABLE(usb, usbtv_id_table);
+
+static int usbtv_querycap(struct file *file, void *priv,
+				struct v4l2_capability *cap)
+{
+	struct usbtv *dev = video_drvdata(file);
+
+	strlcpy(cap->driver, "usbtv", sizeof(cap->driver));
+	strlcpy(cap->card, "usbtv", sizeof(cap->card));
+	usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info));
+	cap->device_caps = V4L2_CAP_VIDEO_CAPTURE;
+	cap->device_caps |= V4L2_CAP_READWRITE | V4L2_CAP_STREAMING;
+	cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
+	return 0;
+}
+
+static int usbtv_enum_input(struct file *file, void *priv,
+					struct v4l2_input *i)
+{
+	if (i->index > 0)
+		return -EINVAL;
+
+	strlcpy(i->name, "Composite", sizeof(i->name));
+	i->type = V4L2_INPUT_TYPE_CAMERA;
+	i->std = V4L2_STD_525_60;
+	return 0;
+}
+
+static int usbtv_enum_fmt_vid_cap(struct file *file, void  *priv,
+					struct v4l2_fmtdesc *f)
+{
+	if (f->index > 0)
+		return -EINVAL;
+
+	strlcpy(f->description, "16 bpp YUY2, 4:2:2, packed",
+					sizeof(f->description));
+	f->pixelformat = V4L2_PIX_FMT_YUYV;
+	return 0;
+}
+
+static int usbtv_fmt_vid_cap(struct file *file, void *priv,
+					struct v4l2_format *f)
+{
+	f->fmt.pix.width = USBTV_WIDTH;
+	f->fmt.pix.height = USBTV_HEIGHT;
+	f->fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV;
+	f->fmt.pix.field = V4L2_FIELD_INTERLACED;
+	f->fmt.pix.bytesperline = USBTV_WIDTH * 2;
+	f->fmt.pix.sizeimage = (f->fmt.pix.bytesperline * f->fmt.pix.height);
+	f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
+	f->fmt.pix.priv = 0;
+	return 0;
+}
+
+static int usbtv_g_std(struct file *file, void *priv, v4l2_std_id *norm)
+{
+	*norm = V4L2_STD_525_60;
+	return 0;
+}
+
+static int usbtv_g_input(struct file *file, void *priv, unsigned int *i)
+{
+	*i = 0;
+	return 0;
+}
+
+static int usbtv_s_input(struct file *file, void *priv, unsigned int i)
+{
+	if (i > 0)
+		return -EINVAL;
+	return 0;
+}
+
+static int usbtv_s_std(struct file *file, void *priv, v4l2_std_id norm)
+{
+	if (norm & V4L2_STD_525_60)
+		return 0;
+	return -EINVAL;
+}
+
+struct v4l2_ioctl_ops usbtv_ioctl_ops = {
+	.vidioc_querycap = usbtv_querycap,
+	.vidioc_enum_input = usbtv_enum_input,
+	.vidioc_enum_fmt_vid_cap = usbtv_enum_fmt_vid_cap,
+	.vidioc_g_fmt_vid_cap = usbtv_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap = usbtv_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap = usbtv_fmt_vid_cap,
+	.vidioc_g_std = usbtv_g_std,
+	.vidioc_s_std = usbtv_s_std,
+	.vidioc_g_input = usbtv_g_input,
+	.vidioc_s_input = usbtv_s_input,
+
+	.vidioc_reqbufs = vb2_ioctl_reqbufs,
+	.vidioc_prepare_buf = vb2_ioctl_prepare_buf,
+	.vidioc_querybuf = vb2_ioctl_querybuf,
+	.vidioc_create_bufs = vb2_ioctl_create_bufs,
+	.vidioc_qbuf = vb2_ioctl_qbuf,
+	.vidioc_dqbuf = vb2_ioctl_dqbuf,
+	.vidioc_streamon = vb2_ioctl_streamon,
+	.vidioc_streamoff = vb2_ioctl_streamoff,
+};
+
+struct v4l2_file_operations usbtv_fops = {
+	.owner = THIS_MODULE,
+	.unlocked_ioctl = video_ioctl2,
+	.mmap = vb2_fop_mmap,
+	.open = v4l2_fh_open,
+	.release = vb2_fop_release,
+	.read = vb2_fop_read,
+	.poll = vb2_fop_poll,
+};
+
+static int usbtv_queue_setup(struct vb2_queue *vq,
+	const struct v4l2_format *v4l_fmt, unsigned int *nbuffers,
+	unsigned int *nplanes, unsigned int sizes[], void *alloc_ctxs[])
+{
+	if (*nbuffers < 2)
+		*nbuffers = 2;
+	*nplanes = 1;
+	sizes[0] = USBTV_CHUNK * USBTV_CHUNKS * sizeof(u32);
+
+	return 0;
+}
+
+static void usbtv_buf_queue(struct vb2_buffer *vb)
+{
+	struct usbtv *usbtv = vb2_get_drv_priv(vb->vb2_queue);
+	struct usbtv_buf *buf = container_of(vb, struct usbtv_buf, vb);
+	unsigned long flags;
+
+	if (usbtv->udev == NULL) {
+		vb2_buffer_done(vb, VB2_BUF_STATE_ERROR);
+		return;
+	}
+
+	spin_lock_irqsave(&usbtv->buflock, flags);
+	list_add_tail(&buf->list, &usbtv->bufs);
+	spin_unlock_irqrestore(&usbtv->buflock, flags);
+}
+
+static int usbtv_start_streaming(struct vb2_queue *vq, unsigned int count)
+{
+	struct usbtv *usbtv = vb2_get_drv_priv(vq);
+
+	if (usbtv->udev == NULL)
+		return -ENODEV;
+
+	return usbtv_start(usbtv);
+}
+
+static int usbtv_stop_streaming(struct vb2_queue *vq)
+{
+	struct usbtv *usbtv = vb2_get_drv_priv(vq);
+
+	if (usbtv->udev == NULL)
+		return -ENODEV;
+
+	usbtv_stop(usbtv);
+	return 0;
+}
+
+struct vb2_ops usbtv_vb2_ops = {
+	.queue_setup = usbtv_queue_setup,
+	.buf_queue = usbtv_buf_queue,
+	.start_streaming = usbtv_start_streaming,
+	.stop_streaming = usbtv_stop_streaming,
+};
+
+static void usbtv_release(struct v4l2_device *v4l2_dev)
+{
+	struct usbtv *usbtv = container_of(v4l2_dev, struct usbtv, v4l2_dev);
+
+	v4l2_device_unregister(&usbtv->v4l2_dev);
+	vb2_queue_release(&usbtv->vb2q);
+	kfree(usbtv);
+}
+
+static int usbtv_probe(struct usb_interface *intf,
+	const struct usb_device_id *id)
+{
+	int ret;
+	int size;
+	struct device *dev = &intf->dev;
+	struct usbtv *usbtv;
+
+	/* Checks that the device is what we think it is. */
+	if (intf->num_altsetting != 2)
+		return -ENODEV;
+	if (intf->altsetting[1].desc.bNumEndpoints != 4)
+		return -ENODEV;
+
+	/* Packet size is split into 11 bits of base size and count of
+	 * extra multiplies of it.*/
+	size = usb_endpoint_maxp(&intf->altsetting[1].endpoint[0].desc);
+	size = (size & 0x07ff) * (((size & 0x1800) >> 11) + 1);
+
+	/* Device structure */
+	usbtv = kzalloc(sizeof(struct usbtv), GFP_KERNEL);
+	if (usbtv == NULL)
+		return -ENOMEM;
+	usbtv->dev = dev;
+	usbtv->udev = usb_get_dev(interface_to_usbdev(intf));
+	usbtv->iso_size = size;
+	spin_lock_init(&usbtv->buflock);
+	mutex_init(&usbtv->v4l2_lock);
+	mutex_init(&usbtv->vb2q_lock);
+	INIT_LIST_HEAD(&usbtv->bufs);
+
+	/* videobuf2 structure */
+	usbtv->vb2q.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	usbtv->vb2q.io_modes = VB2_MMAP | VB2_USERPTR | VB2_READ;
+	usbtv->vb2q.drv_priv = usbtv;
+	usbtv->vb2q.buf_struct_size = sizeof(struct usbtv_buf);
+	usbtv->vb2q.ops = &usbtv_vb2_ops;
+	usbtv->vb2q.mem_ops = &vb2_vmalloc_memops;
+	usbtv->vb2q.timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+	usbtv->vb2q.lock = &usbtv->vb2q_lock;
+	ret = vb2_queue_init(&usbtv->vb2q);
+	if (ret < 0) {
+		dev_warn(dev, "Could not initialize videobuf2 queue\n");
+		goto usbtv_fail;
+	}
+
+	/* v4l2 structure */
+	usbtv->v4l2_dev.release = usbtv_release;
+	ret = v4l2_device_register(dev, &usbtv->v4l2_dev);
+	if (ret < 0) {
+		dev_warn(dev, "Could not register v4l2 device\n");
+		goto v4l2_fail;
+	}
+
+	usb_set_intfdata(intf, usbtv);
+
+	/* Video structure */
+	strlcpy(usbtv->vdev.name, "usbtv", sizeof(usbtv->vdev.name));
+	usbtv->vdev.v4l2_dev = &usbtv->v4l2_dev;
+	usbtv->vdev.release = video_device_release_empty;
+	usbtv->vdev.fops = &usbtv_fops;
+	usbtv->vdev.ioctl_ops = &usbtv_ioctl_ops;
+	usbtv->vdev.tvnorms = V4L2_STD_525_60;
+	usbtv->vdev.queue = &usbtv->vb2q;
+	usbtv->vdev.lock = &usbtv->v4l2_lock;
+	set_bit(V4L2_FL_USE_FH_PRIO, &usbtv->vdev.flags);
+	video_set_drvdata(&usbtv->vdev, usbtv);
+	ret = video_register_device(&usbtv->vdev, VFL_TYPE_GRABBER, -1);
+	if (ret < 0) {
+		dev_warn(dev, "Could not register video device\n");
+		goto vdev_fail;
+	}
+
+	dev_info(dev, "Fushicai USBTV007 Video Grabber\n");
+	return 0;
+
+vdev_fail:
+	v4l2_device_unregister(&usbtv->v4l2_dev);
+v4l2_fail:
+	vb2_queue_release(&usbtv->vb2q);
+usbtv_fail:
+	kfree(usbtv);
+
+	return ret;
+}
+
+static void usbtv_disconnect(struct usb_interface *intf)
+{
+	struct usbtv *usbtv = usb_get_intfdata(intf);
+
+	mutex_lock(&usbtv->vb2q_lock);
+	mutex_lock(&usbtv->v4l2_lock);
+
+	usbtv_stop(usbtv);
+	usb_set_intfdata(intf, NULL);
+	video_unregister_device(&usbtv->vdev);
+	v4l2_device_disconnect(&usbtv->v4l2_dev);
+	usb_put_dev(usbtv->udev);
+	usbtv->udev = NULL;
+
+	mutex_unlock(&usbtv->v4l2_lock);
+	mutex_unlock(&usbtv->vb2q_lock);
+
+	v4l2_device_put(&usbtv->v4l2_dev);
+}
+
+MODULE_AUTHOR("Lubomir Rintel");
+MODULE_DESCRIPTION("Fushicai USBTV007 Video Grabber Driver");
+MODULE_LICENSE("Dual BSD/GPL");
+
+struct usb_driver usbtv_usb_driver = {
+	.name = "usbtv",
+	.id_table = usbtv_id_table,
+	.probe = usbtv_probe,
+	.disconnect = usbtv_disconnect,
+};
+
+module_usb_driver(usbtv_usb_driver);
-- 
cgit v1.2.3-70-g09d2


From b9d4b2da35d44117831c3382710f12a1f9965ed5 Mon Sep 17 00:00:00 2001
From: Alexey Khoroshilov <khoroshilov@ispras.ru>
Date: Mon, 10 Jun 2013 16:00:54 -0300
Subject: [media] ttusb-budget: fix memory leak in ttusb_probe()

If something goes wrong starting from i2c_add_adapter(),
ttusb->iso_urb[] and ttusb itself are not deallocated.
Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c
index 21b9049c7b3..f8a60c19753 100644
--- a/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c
+++ b/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c
@@ -1768,6 +1768,8 @@ err_i2c_del_adapter:
 	i2c_del_adapter(&ttusb->i2c_adap);
 err_unregister_adapter:
 	dvb_unregister_adapter (&ttusb->adapter);
+	ttusb_free_iso_urbs(ttusb);
+	kfree(ttusb);
 	return result;
 }
 
-- 
cgit v1.2.3-70-g09d2


From 05959be7b646e8755a9339ad13e3b87849249f90 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Sat, 22 Jun 2013 11:23:58 -0300
Subject: [media] uvc: Depend on VIDEO_V4L2

The uvcvideo driver lost its dependency on VIDEO_V4L2 during the big
media directory reorganization. Add it back.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/usb/uvc/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/media/usb')

diff --git a/drivers/media/usb/uvc/Kconfig b/drivers/media/usb/uvc/Kconfig
index 541c9f1e4c6..6ed85efabca 100644
--- a/drivers/media/usb/uvc/Kconfig
+++ b/drivers/media/usb/uvc/Kconfig
@@ -1,5 +1,6 @@
 config USB_VIDEO_CLASS
 	tristate "USB Video Class (UVC)"
+	depends on VIDEO_V4L2
 	select VIDEOBUF2_VMALLOC
 	---help---
 	  Support for the USB Video Class (UVC).  Currently only video
-- 
cgit v1.2.3-70-g09d2