From 335377b73dd0b0af1fbd283ceae6fcb87a747885 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 7 May 2008 01:43:10 -0300 Subject: V4L/DVB (7986): cx23885: add initial support for DViCO FusionHDTV7 Dual Express Only one frontend is enabled right now. The second frontend can lock, but transport doesn't work yet. The device will be supported as a single tuner device until the second frontend is working. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx23885/cx23885-cards.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers/media/video/cx23885/cx23885-cards.c') diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index 20e05f23054..fd7112c11d3 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -143,6 +143,10 @@ struct cx23885_board cx23885_boards[] = { .name = "Hauppauge WinTV-HVR1400", .portc = CX23885_MPEG_DVB, }, + [CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP] = { + .name = "DViCO FusionHDTV7 Dual Express", + .portc = CX23885_MPEG_DVB, + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -210,6 +214,10 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x0070, .subdevice = 0x8010, .card = CX23885_BOARD_HAUPPAUGE_HVR1400, + },{ + .subvendor = 0x18ac, + .subdevice = 0xd618, + .card = CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -477,6 +485,11 @@ void cx23885_card_setup(struct cx23885_dev *dev) } switch (dev->board) { + case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP: + ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ + ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + /* break omitted intentionally */ case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP: ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ -- cgit v1.2.3-70-g09d2