From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/media/video/stradis.c | 2258 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 2258 insertions(+) create mode 100644 drivers/media/video/stradis.c (limited to 'drivers/media/video/stradis.c') diff --git a/drivers/media/video/stradis.c b/drivers/media/video/stradis.c new file mode 100644 index 00000000000..b5774357108 --- /dev/null +++ b/drivers/media/video/stradis.c @@ -0,0 +1,2258 @@ +/* + * stradis.c - stradis 4:2:2 mpeg decoder driver + * + * Stradis 4:2:2 MPEG-2 Decoder Driver + * Copyright (C) 1999 Nathan Laredo + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "saa7146.h" +#include "saa7146reg.h" +#include "ibmmpeg2.h" +#include "saa7121.h" +#include "cs8420.h" + +#define DEBUG(x) /* debug driver */ +#undef IDEBUG /* debug irq handler */ +#undef MDEBUG /* debug memory management */ + +#define SAA7146_MAX 6 + +static struct saa7146 saa7146s[SAA7146_MAX]; + +static int saa_num = 0; /* number of SAA7146s in use */ + +static int video_nr = -1; +module_param(video_nr, int, 0); +MODULE_LICENSE("GPL"); + + +#define nDebNormal 0x00480000 +#define nDebNoInc 0x00480000 +#define nDebVideo 0xd0480000 +#define nDebAudio 0xd0400000 +#define nDebDMA 0x02c80000 + +#define oDebNormal 0x13c80000 +#define oDebNoInc 0x13c80000 +#define oDebVideo 0xd1080000 +#define oDebAudio 0xd1080000 +#define oDebDMA 0x03080000 + +#define NewCard (saa->boardcfg[3]) +#define ChipControl (saa->boardcfg[1]) +#define NTSCFirstActive (saa->boardcfg[4]) +#define PALFirstActive (saa->boardcfg[5]) +#define NTSCLastActive (saa->boardcfg[54]) +#define PALLastActive (saa->boardcfg[55]) +#define Have2MB (saa->boardcfg[18] & 0x40) +#define HaveCS8420 (saa->boardcfg[18] & 0x04) +#define IBMMPEGCD20 (saa->boardcfg[18] & 0x20) +#define HaveCS3310 (saa->boardcfg[18] & 0x01) +#define CS3310MaxLvl ((saa->boardcfg[30] << 8) | saa->boardcfg[31]) +#define HaveCS4341 (saa->boardcfg[40] == 2) +#define SDIType (saa->boardcfg[27]) +#define CurrentMode (saa->boardcfg[2]) + +#define debNormal (NewCard ? nDebNormal : oDebNormal) +#define debNoInc (NewCard ? nDebNoInc : oDebNoInc) +#define debVideo (NewCard ? nDebVideo : oDebVideo) +#define debAudio (NewCard ? nDebAudio : oDebAudio) +#define debDMA (NewCard ? nDebDMA : oDebDMA) + +#ifdef USE_RESCUE_EEPROM_SDM275 +static unsigned char rescue_eeprom[64] = { +0x00,0x01,0x04,0x13,0x26,0x0f,0x10,0x00,0x00,0x00,0x43,0x63,0x22,0x01,0x29,0x15,0x73,0x00,0x1f, 'd', 'e', 'c', 'x', 'l', 'd', 'v', 'a',0x02,0x00,0x01,0x00,0xcc,0xa4,0x63,0x09,0xe2,0x10,0x00,0x0a,0x00,0x02,0x02, 'd', 'e', 'c', 'x', 'l', 'a',0x00,0x00,0x42,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +}; +#endif + +/* ----------------------------------------------------------------------- */ +/* Hardware I2C functions */ +static void I2CWipe(struct saa7146 *saa) +{ + int i; + /* set i2c to ~=100kHz, abort transfer, clear busy */ + saawrite(0x600 | SAA7146_I2C_ABORT, SAA7146_I2C_STATUS); + saawrite((SAA7146_MC2_UPLD_I2C << 16) | + SAA7146_MC2_UPLD_I2C, SAA7146_MC2); + /* wait for i2c registers to be programmed */ + for (i = 0; i < 1000 && + !(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_I2C); i++) + schedule(); + saawrite(0x600, SAA7146_I2C_STATUS); + saawrite((SAA7146_MC2_UPLD_I2C << 16) | + SAA7146_MC2_UPLD_I2C, SAA7146_MC2); + /* wait for i2c registers to be programmed */ + for (i = 0; i < 1000 && + !(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_I2C); i++) + schedule(); + saawrite(0x600, SAA7146_I2C_STATUS); + saawrite((SAA7146_MC2_UPLD_I2C << 16) | + SAA7146_MC2_UPLD_I2C, SAA7146_MC2); + /* wait for i2c registers to be programmed */ + for (i = 0; i < 1000 && + !(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_I2C); i++) + schedule(); +} + +/* read I2C */ +static int I2CRead(struct saa7146 *saa, unsigned char addr, + unsigned char subaddr, int dosub) +{ + int i; + + if (saaread(SAA7146_I2C_STATUS) & 0x3c) + I2CWipe(saa); + for (i = 0; i < 1000 && + (saaread(SAA7146_I2C_STATUS) & SAA7146_I2C_BUSY); i++) + schedule(); + if (i == 1000) + I2CWipe(saa); + if (dosub) + saawrite(((addr & 0xfe) << 24) | (((addr | 1) & 0xff) << 8) | + ((subaddr & 0xff) << 16) | 0xed, SAA7146_I2C_TRANSFER); + else + saawrite(((addr & 0xfe) << 24) | (((addr | 1) & 0xff) << 16) | + 0xf1, SAA7146_I2C_TRANSFER); + saawrite((SAA7146_MC2_UPLD_I2C << 16) | + SAA7146_MC2_UPLD_I2C, SAA7146_MC2); + /* wait for i2c registers to be programmed */ + for (i = 0; i < 1000 && + !(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_I2C); i++) + schedule(); + /* wait for valid data */ + for (i = 0; i < 1000 && + (saaread(SAA7146_I2C_STATUS) & SAA7146_I2C_BUSY); i++) + schedule(); + if (saaread(SAA7146_I2C_STATUS) & SAA7146_I2C_ERR) + return -1; + if (i == 1000) + printk("i2c setup read timeout\n"); + saawrite(0x41, SAA7146_I2C_TRANSFER); + saawrite((SAA7146_MC2_UPLD_I2C << 16) | + SAA7146_MC2_UPLD_I2C, SAA7146_MC2); + /* wait for i2c registers to be programmed */ + for (i = 0; i < 1000 && + !(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_I2C); i++) + schedule(); + /* wait for valid data */ + for (i = 0; i < 1000 && + (saaread(SAA7146_I2C_TRANSFER) & SAA7146_I2C_BUSY); i++) + schedule(); + if (saaread(SAA7146_I2C_TRANSFER) & SAA7146_I2C_ERR) + return -1; + if (i == 1000) + printk("i2c read timeout\n"); + return ((saaread(SAA7146_I2C_TRANSFER) >> 24) & 0xff); +} + +/* set both to write both bytes, reset it to write only b1 */ + +static int I2CWrite(struct saa7146 *saa, unsigned char addr, unsigned char b1, + unsigned char b2, int both) +{ + int i; + u32 data; + + if (saaread(SAA7146_I2C_STATUS) & 0x3c) + I2CWipe(saa); + for (i = 0; i < 1000 && + (saaread(SAA7146_I2C_STATUS) & SAA7146_I2C_BUSY); i++) + schedule(); + if (i == 1000) + I2CWipe(saa); + data = ((addr & 0xfe) << 24) | ((b1 & 0xff) << 16); + if (both) + data |= ((b2 & 0xff) << 8) | 0xe5; + else + data |= 0xd1; + saawrite(data, SAA7146_I2C_TRANSFER); + saawrite((SAA7146_MC2_UPLD_I2C << 16) | SAA7146_MC2_UPLD_I2C, + SAA7146_MC2); + return 0; +} + +static void attach_inform(struct saa7146 *saa, int id) +{ + int i; + + DEBUG(printk(KERN_DEBUG "stradis%d: i2c: device found=%02x\n", saa->nr, id)); + if (id == 0xa0) { /* we have rev2 or later board, fill in info */ + for (i = 0; i < 64; i++) + saa->boardcfg[i] = I2CRead(saa, 0xa0, i, 1); +#ifdef USE_RESCUE_EEPROM_SDM275 + if (saa->boardcfg[0] != 0) { + printk("stradis%d: WARNING: EEPROM STORED VALUES HAVE BEEN IGNORED\n", saa->nr); + for (i = 0; i < 64; i++) + saa->boardcfg[i] = rescue_eeprom[i]; + } +#endif + printk("stradis%d: config =", saa->nr); + for (i = 0; i < 51; i++) { + printk(" %02x",saa->boardcfg[i]); + } + printk("\n"); + } +} + +static void I2CBusScan(struct saa7146 *saa) +{ + int i; + for (i = 0; i < 0xff; i += 2) + if ((I2CRead(saa, i, 0, 0)) >= 0) + attach_inform(saa, i); +} + +static int debiwait_maxwait = 0; + +static int wait_for_debi_done(struct saa7146 *saa) +{ + int i; + + /* wait for registers to be programmed */ + for (i = 0; i < 100000 && + !(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_DEBI); i++) + saaread(SAA7146_MC2); + /* wait for transfer to complete */ + for (i = 0; i < 500000 && + (saaread(SAA7146_PSR) & SAA7146_PSR_DEBI_S); i++) + saaread(SAA7146_MC2); + if (i > debiwait_maxwait) + printk("wait-for-debi-done maxwait: %d\n", + debiwait_maxwait = i); + + if (i == 500000) + return -1; + return 0; +} + +static int debiwrite(struct saa7146 *saa, u32 config, int addr, + u32 val, int count) +{ + u32 cmd; + if (count <= 0 || count > 32764) + return -1; + if (wait_for_debi_done(saa) < 0) + return -1; + saawrite(config, SAA7146_DEBI_CONFIG); + if (count <= 4) /* immediate transfer */ + saawrite(val, SAA7146_DEBI_AD); + else /* block transfer */ + saawrite(virt_to_bus(saa->dmadebi), SAA7146_DEBI_AD); + saawrite((cmd = (count << 17) | (addr & 0xffff)), SAA7146_DEBI_COMMAND); + saawrite((SAA7146_MC2_UPLD_DEBI << 16) | SAA7146_MC2_UPLD_DEBI, + SAA7146_MC2); + return 0; +} + +static u32 debiread(struct saa7146 *saa, u32 config, int addr, int count) +{ + u32 result = 0; + + if (count > 32764 || count <= 0) + return 0; + if (wait_for_debi_done(saa) < 0) + return 0; + saawrite(virt_to_bus(saa->dmadebi), SAA7146_DEBI_AD); + saawrite((count << 17) | 0x10000 | (addr & 0xffff), + SAA7146_DEBI_COMMAND); + saawrite(config, SAA7146_DEBI_CONFIG); + saawrite((SAA7146_MC2_UPLD_DEBI << 16) | SAA7146_MC2_UPLD_DEBI, + SAA7146_MC2); + if (count > 4) /* not an immediate transfer */ + return count; + wait_for_debi_done(saa); + result = saaread(SAA7146_DEBI_AD); + if (count == 1) + result &= 0xff; + if (count == 2) + result &= 0xffff; + if (count == 3) + result &= 0xffffff; + return result; +} + +#if 0 /* unused */ +/* MUST be a multiple of 8 bytes and 8-byte aligned and < 32768 bytes */ +/* data copied into saa->dmadebi buffer, caller must re-enable interrupts */ +static void ibm_block_dram_read(struct saa7146 *saa, int address, int bytes) +{ + int i, j; + u32 *buf; + buf = (u32 *) saa->dmadebi; + if (bytes > 0x7000) + bytes = 0x7000; + saawrite(0, SAA7146_IER); /* disable interrupts */ + for (i=0; i < 10000 && + (debiread(saa, debNormal, IBM_MP2_DRAM_CMD_STAT, 2) + & 0x8000); i++) + saaread(SAA7146_MC2); + if (i == 10000) + printk(KERN_ERR "stradis%d: dram_busy never cleared\n", + saa->nr); + debiwrite(saa, debNormal, IBM_MP2_SRC_ADDR, (address<<16) | + (address>>16), 4); + debiwrite(saa, debNormal, IBM_MP2_BLOCK_SIZE, bytes, 2); + debiwrite(saa, debNormal, IBM_MP2_CMD_STAT, 0x8a10, 2); + for (j = 0; j < bytes/4; j++) { + for (i = 0; i < 10000 && + (!(debiread(saa, debNormal, IBM_MP2_DRAM_CMD_STAT, 2) + & 0x4000)); i++) + saaread(SAA7146_MC2); + if (i == 10000) + printk(KERN_ERR "stradis%d: dram_ready never set\n", + saa->nr); + buf[j] = debiread(saa, debNormal, IBM_MP2_DRAM_DATA, 4); + } +} +#endif /* unused */ + +static void do_irq_send_data(struct saa7146 *saa) +{ + int split, audbytes, vidbytes; + + saawrite(SAA7146_PSR_PIN1, SAA7146_IER); + /* if special feature mode in effect, disable audio sending */ + if (saa->playmode != VID_PLAY_NORMAL) + saa->audtail = saa->audhead = 0; + if (saa->audhead <= saa->audtail) + audbytes = saa->audtail - saa->audhead; + else + audbytes = 65536 - (saa->audhead - saa->audtail); + if (saa->vidhead <= saa->vidtail) + vidbytes = saa->vidtail - saa->vidhead; + else + vidbytes = 524288 - (saa->vidhead - saa->vidtail); + if (audbytes == 0 && vidbytes == 0 && saa->osdtail == saa->osdhead) { + saawrite(0, SAA7146_IER); + return; + } + /* if at least 1 block audio waiting and audio fifo isn't full */ + if (audbytes >= 2048 && (debiread(saa, debNormal, + IBM_MP2_AUD_FIFO, 2) & 0xff) < 60) { + if (saa->audhead > saa->audtail) + split = 65536 - saa->audhead; + else + split = 0; + audbytes = 2048; + if (split > 0 && split < 2048) { + memcpy(saa->dmadebi, saa->audbuf + saa->audhead, + split); + saa->audhead = 0; + audbytes -= split; + } else + split = 0; + memcpy(saa->dmadebi + split, saa->audbuf + saa->audhead, + audbytes); + saa->audhead += audbytes; + saa->audhead &= 0xffff; + debiwrite(saa, debAudio, (NewCard? IBM_MP2_AUD_FIFO : + IBM_MP2_AUD_FIFOW), 0, 2048); + wake_up_interruptible(&saa->audq); + /* if at least 1 block video waiting and video fifo isn't full */ + } else if (vidbytes >= 30720 && (debiread(saa, debNormal, + IBM_MP2_FIFO, 2)) < 16384) { + if (saa->vidhead > saa->vidtail) + split = 524288 - saa->vidhead; + else + split = 0; + vidbytes = 30720; + if (split > 0 && split < 30720) { + memcpy(saa->dmadebi, saa->vidbuf + saa->vidhead, + split); + saa->vidhead = 0; + vidbytes -= split; + } else + split = 0; + memcpy(saa->dmadebi + split, saa->vidbuf + saa->vidhead, + vidbytes); + saa->vidhead += vidbytes; + saa->vidhead &= 0x7ffff; + debiwrite(saa, debVideo, (NewCard ? IBM_MP2_FIFO : + IBM_MP2_FIFOW), 0, 30720); + wake_up_interruptible(&saa->vidq); + } + saawrite(SAA7146_PSR_DEBI_S | SAA7146_PSR_PIN1, SAA7146_IER); +} + +static void send_osd_data(struct saa7146 *saa) +{ + int size = saa->osdtail - saa->osdhead; + if (size > 30720) + size = 30720; + /* ensure some multiple of 8 bytes is transferred */ + size = 8 * ((size + 8)>>3); + if (size) { + debiwrite(saa, debNormal, IBM_MP2_OSD_ADDR, + (saa->osdhead>>3), 2); + memcpy(saa->dmadebi, &saa->osdbuf[saa->osdhead], size); + saa->osdhead += size; + /* block transfer of next 8 bytes to ~32k bytes */ + debiwrite(saa, debNormal, IBM_MP2_OSD_DATA, 0, size); + } + if (saa->osdhead >= saa->osdtail) { + saa->osdhead = saa->osdtail = 0; + debiwrite(saa, debNormal, IBM_MP2_MASK0, 0xc00c, 2); + } +} + +static irqreturn_t saa7146_irq(int irq, void *dev_id, struct pt_regs *regs) +{ + struct saa7146 *saa = (struct saa7146 *) dev_id; + u32 stat, astat; + int count; + int handled = 0; + + count = 0; + while (1) { + /* get/clear interrupt status bits */ + stat = saaread(SAA7146_ISR); + astat = stat & saaread(SAA7146_IER); + if (!astat) + break; + handled = 1; + saawrite(astat, SAA7146_ISR); + if (astat & SAA7146_PSR_DEBI_S) { + do_irq_send_data(saa); + } + if (astat & SAA7146_PSR_PIN1) { + int istat; + /* the following read will trigger DEBI_S */ + istat = debiread(saa, debNormal, IBM_MP2_HOST_INT, 2); + if (istat & 1) { + saawrite(0, SAA7146_IER); + send_osd_data(saa); + saawrite(SAA7146_PSR_DEBI_S | + SAA7146_PSR_PIN1, SAA7146_IER); + } + if (istat & 0x20) { /* Video Start */ + saa->vidinfo.frame_count++; + } + if (istat & 0x400) { /* Picture Start */ + /* update temporal reference */ + } + if (istat & 0x200) { /* Picture Resolution Change */ + /* read new resolution */ + } + if (istat & 0x100) { /* New User Data found */ + /* read new user data */ + } + if (istat & 0x1000) { /* new GOP/SMPTE */ + /* read new SMPTE */ + } + if (istat & 0x8000) { /* Sequence Start Code */ + /* reset frame counter, load sizes */ + saa->vidinfo.frame_count = 0; + saa->vidinfo.h_size = 704; + saa->vidinfo.v_size = 480; +#if 0 + if (saa->endmarkhead != saa->endmarktail) { + saa->audhead = + saa->endmark[saa->endmarkhead]; + saa->endmarkhead++; + if (saa->endmarkhead >= MAX_MARKS) + saa->endmarkhead = 0; + } +#endif + } + if (istat & 0x4000) { /* Sequence Error Code */ + if (saa->endmarkhead != saa->endmarktail) { + saa->audhead = + saa->endmark[saa->endmarkhead]; + saa->endmarkhead++; + if (saa->endmarkhead >= MAX_MARKS) + saa->endmarkhead = 0; + } + } + } +#ifdef IDEBUG + if (astat & SAA7146_PSR_PPEF) { + IDEBUG(printk("stradis%d irq: PPEF\n", saa->nr)); + } + if (astat & SAA7146_PSR_PABO) { + IDEBUG(printk("stradis%d irq: PABO\n", saa->nr)); + } + if (astat & SAA7146_PSR_PPED) { + IDEBUG(printk("stradis%d irq: PPED\n", saa->nr)); + } + if (astat & SAA7146_PSR_RPS_I1) { + IDEBUG(printk("stradis%d irq: RPS_I1\n", saa->nr)); + } + if (astat & SAA7146_PSR_RPS_I0) { + IDEBUG(printk("stradis%d irq: RPS_I0\n", saa->nr)); + } + if (astat & SAA7146_PSR_RPS_LATE1) { + IDEBUG(printk("stradis%d irq: RPS_LATE1\n", saa->nr)); + } + if (astat & SAA7146_PSR_RPS_LATE0) { + IDEBUG(printk("stradis%d irq: RPS_LATE0\n", saa->nr)); + } + if (astat & SAA7146_PSR_RPS_E1) { + IDEBUG(printk("stradis%d irq: RPS_E1\n", saa->nr)); + } + if (astat & SAA7146_PSR_RPS_E0) { + IDEBUG(printk("stradis%d irq: RPS_E0\n", saa->nr)); + } + if (astat & SAA7146_PSR_RPS_TO1) { + IDEBUG(printk("stradis%d irq: RPS_TO1\n", saa->nr)); + } + if (astat & SAA7146_PSR_RPS_TO0) { + IDEBUG(printk("stradis%d irq: RPS_TO0\n", saa->nr)); + } + if (astat & SAA7146_PSR_UPLD) { + IDEBUG(printk("stradis%d irq: UPLD\n", saa->nr)); + } + if (astat & SAA7146_PSR_DEBI_E) { + IDEBUG(printk("stradis%d irq: DEBI_E\n", saa->nr)); + } + if (astat & SAA7146_PSR_I2C_S) { + IDEBUG(printk("stradis%d irq: I2C_S\n", saa->nr)); + } + if (astat & SAA7146_PSR_I2C_E) { + IDEBUG(printk("stradis%d irq: I2C_E\n", saa->nr)); + } + if (astat & SAA7146_PSR_A2_IN) { + IDEBUG(printk("stradis%d irq: A2_IN\n", saa->nr)); + } + if (astat & SAA7146_PSR_A2_OUT) { + IDEBUG(printk("stradis%d irq: A2_OUT\n", saa->nr)); + } + if (astat & SAA7146_PSR_A1_IN) { + IDEBUG(printk("stradis%d irq: A1_IN\n", saa->nr)); + } + if (astat & SAA7146_PSR_A1_OUT) { + IDEBUG(printk("stradis%d irq: A1_OUT\n", saa->nr)); + } + if (astat & SAA7146_PSR_AFOU) { + IDEBUG(printk("stradis%d irq: AFOU\n", saa->nr)); + } + if (astat & SAA7146_PSR_V_PE) { + IDEBUG(printk("stradis%d irq: V_PE\n", saa->nr)); + } + if (astat & SAA7146_PSR_VFOU) { + IDEBUG(printk("stradis%d irq: VFOU\n", saa->nr)); + } + if (astat & SAA7146_PSR_FIDA) { + IDEBUG(printk("stradis%d irq: FIDA\n", saa->nr)); + } + if (astat & SAA7146_PSR_FIDB) { + IDEBUG(printk("stradis%d irq: FIDB\n", saa->nr)); + } + if (astat & SAA7146_PSR_PIN3) { + IDEBUG(printk("stradis%d irq: PIN3\n", saa->nr)); + } + if (astat & SAA7146_PSR_PIN2) { + IDEBUG(printk("stradis%d irq: PIN2\n", saa->nr)); + } + if (astat & SAA7146_PSR_PIN0) { + IDEBUG(printk("stradis%d irq: PIN0\n", saa->nr)); + } + if (astat & SAA7146_PSR_ECS) { + IDEBUG(printk("stradis%d irq: ECS\n", saa->nr)); + } + if (astat & SAA7146_PSR_EC3S) { + IDEBUG(printk("stradis%d irq: EC3S\n", saa->nr)); + } + if (astat & SAA7146_PSR_EC0S) { + IDEBUG(printk("stradis%d irq: EC0S\n", saa->nr)); + } +#endif + count++; + if (count > 15) + printk(KERN_WARNING "stradis%d: irq loop %d\n", + saa->nr, count); + if (count > 20) { + saawrite(0, SAA7146_IER); + printk(KERN_ERR + "stradis%d: IRQ loop cleared\n", saa->nr); + } + } + return IRQ_RETVAL(handled); +} + +static int ibm_send_command(struct saa7146 *saa, + int command, int data, int chain) +{ + int i; + + if (chain) + debiwrite(saa, debNormal, IBM_MP2_COMMAND, (command << 1) | 1, 2); + else + debiwrite(saa, debNormal, IBM_MP2_COMMAND, command << 1, 2); + debiwrite(saa, debNormal, IBM_MP2_CMD_DATA, data, 2); + debiwrite(saa, debNormal, IBM_MP2_CMD_STAT, 1, 2); + for (i = 0; i < 100 && + (debiread(saa, debNormal, IBM_MP2_CMD_STAT, 2) & 1); i++) + schedule(); + if (i == 100) + return -1; + return 0; +} + +static void cs4341_setlevel(struct saa7146 *saa, int left, int right) +{ + I2CWrite(saa, 0x22, 0x03, left > 94 ? 94 : left, 2); + I2CWrite(saa, 0x22, 0x04, right > 94 ? 94 : right, 2); +} + +static void initialize_cs4341(struct saa7146 *saa) +{ + int i; + for (i = 0; i < 200; i++) { + /* auto mute off, power on, no de-emphasis */ + /* I2S data up to 24-bit 64xFs internal SCLK */ + I2CWrite(saa, 0x22, 0x01, 0x11, 2); + /* ATAPI mixer settings */ + I2CWrite(saa, 0x22, 0x02, 0x49, 2); + /* attenuation left 3db */ + I2CWrite(saa, 0x22, 0x03, 0x00, 2); + /* attenuation right 3db */ + I2CWrite(saa, 0x22, 0x04, 0x00, 2); + I2CWrite(saa, 0x22, 0x01, 0x10, 2); + if (I2CRead(saa, 0x22, 0x02, 1) == 0x49) + break; + schedule(); + } + printk("stradis%d: CS4341 initialized (%d)\n", saa->nr, i); + return; +} + +static void initialize_cs8420(struct saa7146 *saa, int pro) +{ + int i; + u8 *sequence; + if (pro) + sequence = mode8420pro; + else + sequence = mode8420con; + for (i = 0; i < INIT8420LEN; i++) + I2CWrite(saa, 0x20, init8420[i * 2], + init8420[i * 2 + 1], 2); + for (i = 0; i < MODE8420LEN; i++) + I2CWrite(saa, 0x20, sequence[i * 2], + sequence[i * 2 + 1], 2); + printk("stradis%d: CS8420 initialized\n", saa->nr); +} + +static void initialize_saa7121(struct saa7146 *saa, int dopal) +{ + int i, mod; + u8 *sequence; + if (dopal) + sequence = init7121pal; + else + sequence = init7121ntsc; + mod = saaread(SAA7146_PSR) & 0x08; + /* initialize PAL/NTSC video encoder */ + for (i = 0; i < INIT7121LEN; i++) { + if (NewCard) { /* handle new card encoder differences */ + if (sequence[i*2] == 0x3a) + I2CWrite(saa, 0x88, 0x3a, 0x13, 2); + else if (sequence[i*2] == 0x6b) + I2CWrite(saa, 0x88, 0x6b, 0x20, 2); + else if (sequence[i*2] == 0x6c) + I2CWrite(saa, 0x88, 0x6c, + dopal ? 0x09 : 0xf5, 2); + else if (sequence[i*2] == 0x6d) + I2CWrite(saa, 0x88, 0x6d, + dopal ? 0x20 : 0x00, 2); + else if (sequence[i*2] == 0x7a) + I2CWrite(saa, 0x88, 0x7a, + dopal ? (PALFirstActive - 1) : + (NTSCFirstActive - 4), 2); + else if (sequence[i*2] == 0x7b) + I2CWrite(saa, 0x88, 0x7b, + dopal ? PALLastActive : + NTSCLastActive, 2); + else I2CWrite(saa, 0x88, sequence[i * 2], + sequence[i * 2 + 1], 2); + } else { + if (sequence[i*2] == 0x6b && mod) + I2CWrite(saa, 0x88, 0x6b, + (sequence[i * 2 + 1] ^ 0x09), 2); + else if (sequence[i*2] == 0x7a) + I2CWrite(saa, 0x88, 0x7a, + dopal ? (PALFirstActive - 1) : + (NTSCFirstActive - 4), 2); + else if (sequence[i*2] == 0x7b) + I2CWrite(saa, 0x88, 0x7b, + dopal ? PALLastActive : + NTSCLastActive, 2); + else + I2CWrite(saa, 0x88, sequence[i * 2], + sequence[i * 2 + 1], 2); + } + } +} + +static void set_genlock_offset(struct saa7146 *saa, int noffset) +{ + int nCode; + int PixelsPerLine = 858; + if (CurrentMode == VIDEO_MODE_PAL) + PixelsPerLine = 864; + if (noffset > 500) + noffset = 500; + else if (noffset < -500) + noffset = -500; + nCode = noffset + 0x100; + if (nCode == 1) + nCode = 0x401; + else if (nCode < 1) nCode = 0x400 + PixelsPerLine + nCode; + debiwrite(saa, debNormal, XILINX_GLDELAY, nCode, 2); +} + +static void set_out_format(struct saa7146 *saa, int mode) +{ + initialize_saa7121(saa, (mode == VIDEO_MODE_NTSC ? 0 : 1)); + saa->boardcfg[2] = mode; + /* do not adjust analog video parameters here, use saa7121 init */ + /* you will affect the SDI output on the new card */ + if (mode == VIDEO_MODE_PAL) { /* PAL */ + debiwrite(saa, debNormal, XILINX_CTL0, 0x0808, 2); + mdelay(50); + saawrite(0x012002c0, SAA7146_NUM_LINE_BYTE1); + if (NewCard) { + debiwrite(saa, debNormal, IBM_MP2_DISP_MODE, + 0xe100, 2); + mdelay(50); + } + debiwrite(saa, debNormal, IBM_MP2_DISP_MODE, + NewCard ? 0xe500: 0x6500, 2); + debiwrite(saa, debNormal, IBM_MP2_DISP_DLY, + (1 << 8) | + (NewCard ? PALFirstActive : PALFirstActive-6), 2); + } else { /* NTSC */ + debiwrite(saa, debNormal, XILINX_CTL0, 0x0800, 2); + mdelay(50); + saawrite(0x00f002c0, SAA7146_NUM_LINE_BYTE1); + debiwrite(saa, debNormal, IBM_MP2_DISP_MODE, + NewCard ? 0xe100: 0x6100, 2); + debiwrite(saa, debNormal, IBM_MP2_DISP_DLY, + (1 << 8) | + (NewCard ? NTSCFirstActive : NTSCFirstActive-6), 2); + } +} + + +/* Intialize bitmangler to map from a byte value to the mangled word that + * must be output to program the Xilinx part through the DEBI port. + * Xilinx Data Bit->DEBI Bit: 0->15 1->7 2->6 3->12 4->11 5->2 6->1 7->0 + * transfer FPGA code, init IBM chip, transfer IBM microcode + * rev2 card mangles: 0->7 1->6 2->5 3->4 4->3 5->2 6->1 7->0 + */ +static u16 bitmangler[256]; + +static int initialize_fpga(struct video_code *bitdata) +{ + int i, num, startindex, failure = 0, loadtwo, loadfile = 0; + u16 *dmabuf; + u8 *newdma; + struct saa7146 *saa; + + /* verify fpga code */ + for (startindex = 0; startindex < bitdata->datasize; startindex++) + if (bitdata->data[startindex] == 255) + break; + if (startindex == bitdata->datasize) { + printk(KERN_INFO "stradis: bad fpga code\n"); + return -1; + } + /* initialize all detected cards */ + for (num = 0; num < saa_num; num++) { + saa = &saa7146s[num]; + if (saa->boardcfg[0] > 20) + continue; /* card was programmed */ + loadtwo = (saa->boardcfg[18] & 0x10); + if (!NewCard) /* we have an old board */ + for (i = 0; i < 256; i++) + bitmangler[i] = ((i & 0x01) << 15) | + ((i & 0x02) << 6) | ((i & 0x04) << 4) | + ((i & 0x08) << 9) | ((i & 0x10) << 7) | + ((i & 0x20) >> 3) | ((i & 0x40) >> 5) | + ((i & 0x80) >> 7); + else /* else we have a new board */ + for (i = 0; i < 256; i++) + bitmangler[i] = ((i & 0x01) << 7) | + ((i & 0x02) << 5) | ((i & 0x04) << 3) | + ((i & 0x08) << 1) | ((i & 0x10) >> 1) | + ((i & 0x20) >> 3) | ((i & 0x40) >> 5) | + ((i & 0x80) >> 7); + + dmabuf = (u16 *) saa->dmadebi; + newdma = (u8 *) saa->dmadebi; + if (NewCard) { /* SDM2xxx */ + if (!strncmp(bitdata->loadwhat, "decoder2", 8)) + continue; /* fpga not for this card */ + if (!strncmp(&saa->boardcfg[42], + bitdata->loadwhat, 8)) { + loadfile = 1; + } else if (loadtwo && !strncmp(&saa->boardcfg[19], + bitdata->loadwhat, 8)) { + loadfile = 2; + } else if (!saa->boardcfg[42] && /* special */ + !strncmp("decxl", bitdata->loadwhat, 8)) { + loadfile = 1; + } else + continue; /* fpga not for this card */ + if (loadfile != 1 && loadfile != 2) { + continue; /* skip to next card */ + } + if (saa->boardcfg[0] && loadfile == 1 ) + continue; /* skip to next card */ + if (saa->boardcfg[0] != 1 && loadfile == 2) + continue; /* skip to next card */ + saa->boardcfg[0]++; /* mark fpga handled */ + printk("stradis%d: loading %s\n", saa->nr, + bitdata->loadwhat); + if (loadtwo && loadfile == 2) + goto send_fpga_stuff; + /* turn on the Audio interface to set PROG low */ + saawrite(0x00400040, SAA7146_GPIO_CTRL); + saaread(SAA7146_PSR); /* ensure posted write */ + /* wait for everyone to reset */ + mdelay(10); + saawrite(0x00400000, SAA7146_GPIO_CTRL); + } else { /* original card */ + if (strncmp(bitdata->loadwhat, "decoder2", 8)) + continue; /* fpga not for this card */ + /* Pull the Xilinx PROG signal WS3 low */ + saawrite(0x02000200, SAA7146_MC1); + /* Turn on the Audio interface so can set PROG low */ + saawrite(0x000000c0, SAA7146_ACON1); + /* Pull the Xilinx INIT signal (GPIO2) low */ + saawrite(0x00400000, SAA7146_GPIO_CTRL); + /* Make sure everybody resets */ + saaread(SAA7146_PSR); /* ensure posted write */ + mdelay(10); + /* Release the Xilinx PROG signal */ + saawrite(0x00000000, SAA7146_ACON1); + /* Turn off the Audio interface */ + saawrite(0x02000000, SAA7146_MC1); + } + /* Release Xilinx INIT signal (WS2) */ + saawrite(0x00000000, SAA7146_GPIO_CTRL); + /* Wait for the INIT to go High */ + for (i = 0; i < 10000 && + !(saaread(SAA7146_PSR) & SAA7146_PSR_PIN2); i++) + schedule(); + if (i == 1000) { + printk(KERN_INFO "stradis%d: no fpga INIT\n", saa->nr); + return -1; + } +send_fpga_stuff: + if (NewCard) { + for (i = startindex; i < bitdata->datasize; i++) + newdma[i - startindex] = + bitmangler[bitdata->data[i]]; + debiwrite(saa, 0x01420000, 0, 0, + ((bitdata->datasize - startindex) + 5)); + if (loadtwo) { + if (loadfile == 1) { + printk("stradis%d: " + "awaiting 2nd FPGA bitfile\n", + saa->nr); + continue; /* skip to next card */ + } + + } + } else { + for (i = startindex; i < bitdata->datasize; i++) + dmabuf[i - startindex] = + bitmangler[bitdata->data[i]]; + debiwrite(saa, 0x014a0000, 0, 0, + ((bitdata->datasize - startindex) + 5) * 2); + } + for (i = 0; i < 1000 && + !(saaread(SAA7146_PSR) & SAA7146_PSR_PIN2); i++) + schedule(); + if (i == 1000) { + printk(KERN_INFO "stradis%d: FPGA load failed\n", + saa->nr); + failure++; + continue; + } + if (!NewCard) { + /* Pull the Xilinx INIT signal (GPIO2) low */ + saawrite(0x00400000, SAA7146_GPIO_CTRL); + saaread(SAA7146_PSR); /* ensure posted write */ + mdelay(2); + saawrite(0x00000000, SAA7146_GPIO_CTRL); + mdelay(2); + } + printk(KERN_INFO "stradis%d: FPGA Loaded\n", saa->nr); + saa->boardcfg[0] = 26; /* mark fpga programmed */ + /* set VXCO to its lowest frequency */ + debiwrite(saa, debNormal, XILINX_PWM, 0, 2); + if (NewCard) { + /* mute CS3310 */ + if (HaveCS3310) + debiwrite(saa, debNormal, XILINX_CS3310_CMPLT, + 0, 2); + /* set VXCO to PWM mode, release reset, blank on */ + debiwrite(saa, debNormal, XILINX_CTL0, 0xffc4, 2); + mdelay(10); + /* unmute CS3310 */ + if (HaveCS3310) + debiwrite(saa, debNormal, XILINX_CTL0, + 0x2020, 2); + } + /* set source Black */ + debiwrite(saa, debNormal, XILINX_CTL0, 0x1707, 2); + saa->boardcfg[4] = 22; /* set NTSC First Active Line */ + saa->boardcfg[5] = 23; /* set PAL First Active Line */ + saa->boardcfg[54] = 2; /* set NTSC Last Active Line - 256 */ + saa->boardcfg[55] = 54; /* set PAL Last Active Line - 256 */ + set_out_format(saa, VIDEO_MODE_NTSC); + mdelay(50); + /* begin IBM chip init */ + debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, 4, 2); + saaread(SAA7146_PSR); /* wait for reset */ + mdelay(5); + debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, 0, 2); + debiread(saa, debNormal, IBM_MP2_CHIP_CONTROL, 2); + debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, 0x10, 2); + debiwrite(saa, debNormal, IBM_MP2_CMD_ADDR, 0, 2); + debiwrite(saa, debNormal, IBM_MP2_CHIP_MODE, 0x2e, 2); + if (NewCard) { + mdelay(5); + /* set i2s rate converter to 48KHz */ + debiwrite(saa, debNormal, 0x80c0, 6, 2); + /* we must init CS8420 first since rev b pulls i2s */ + /* master clock low and CS4341 needs i2s master to */ + /* run the i2c port. */ + if (HaveCS8420) { + /* 0=consumer, 1=pro */ + initialize_cs8420(saa, 0); + } + mdelay(5); + if (HaveCS4341) + initialize_cs4341(saa); + } + debiwrite(saa, debNormal, IBM_MP2_INFC_CTL, 0x48, 2); + debiwrite(saa, debNormal, IBM_MP2_BEEP_CTL, 0xa000, 2); + debiwrite(saa, debNormal, IBM_MP2_DISP_LBOR, 0, 2); + debiwrite(saa, debNormal, IBM_MP2_DISP_TBOR, 0, 2); + if (NewCard) + set_genlock_offset(saa, 0); + debiwrite(saa, debNormal, IBM_MP2_FRNT_ATTEN, 0, 2); +#if 0 + /* enable genlock */ + debiwrite(saa, debNormal, XILINX_CTL0, 0x8000, 2); +#else + /* disable genlock */ + debiwrite(saa, debNormal, XILINX_CTL0, 0x8080, 2); +#endif + } + return failure; +} + +static int do_ibm_reset(struct saa7146 *saa) +{ + /* failure if decoder not previously programmed */ + if (saa->boardcfg[0] < 37) + return -EIO; + /* mute CS3310 */ + if (HaveCS3310) + debiwrite(saa, debNormal, XILINX_CS3310_CMPLT, 0, 2); + /* disable interrupts */ + saawrite(0, SAA7146_IER); + saa->audhead = saa->audtail = 0; + saa->vidhead = saa->vidtail = 0; + /* tristate debi bus, disable debi transfers */ + saawrite(0x00880000, SAA7146_MC1); + /* ensure posted write */ + saaread(SAA7146_MC1); + mdelay(50); + /* re-enable debi transfers */ + saawrite(0x00880088, SAA7146_MC1); + /* set source Black */ + debiwrite(saa, debNormal, XILINX_CTL0, 0x1707, 2); + /* begin IBM chip init */ + set_out_format(saa, CurrentMode); + debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, 4, 2); + saaread(SAA7146_PSR); /* wait for reset */ + mdelay(5); + debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, 0, 2); + debiread(saa, debNormal, IBM_MP2_CHIP_CONTROL, 2); + debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, ChipControl, 2); + debiwrite(saa, debNormal, IBM_MP2_CHIP_MODE, 0x2e, 2); + if (NewCard) { + mdelay(5); + /* set i2s rate converter to 48KHz */ + debiwrite(saa, debNormal, 0x80c0, 6, 2); + /* we must init CS8420 first since rev b pulls i2s */ + /* master clock low and CS4341 needs i2s master to */ + /* run the i2c port. */ + if (HaveCS8420) { + /* 0=consumer, 1=pro */ + initialize_cs8420(saa, 1); + } + mdelay(5); + if (HaveCS4341) + initialize_cs4341(saa); + } + debiwrite(saa, debNormal, IBM_MP2_INFC_CTL, 0x48, 2); + debiwrite(saa, debNormal, IBM_MP2_BEEP_CTL, 0xa000, 2); + debiwrite(saa, debNormal, IBM_MP2_DISP_LBOR, 0, 2); + debiwrite(saa, debNormal, IBM_MP2_DISP_TBOR, 0, 2); + if (NewCard) + set_genlock_offset(saa, 0); + debiwrite(saa, debNormal, IBM_MP2_FRNT_ATTEN, 0, 2); + debiwrite(saa, debNormal, IBM_MP2_OSD_SIZE, 0x2000, 2); + debiwrite(saa, debNormal, IBM_MP2_AUD_CTL, 0x4552, 2); + if (ibm_send_command(saa, IBM_MP2_CONFIG_DECODER, + (ChipControl == 0x43 ? 0xe800 : 0xe000), 1)) { + printk(KERN_ERR "stradis%d: IBM config failed\n", saa->nr); + } + if (HaveCS3310) { + int i = CS3310MaxLvl; + debiwrite(saa, debNormal, XILINX_CS3310_CMPLT, ((i<<8)|i), 2); + } + /* start video decoder */ + debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, ChipControl, 2); + /* 256k vid, 3520 bytes aud */ + debiwrite(saa, debNormal, IBM_MP2_RB_THRESHOLD, 0x4037, 2); + debiwrite(saa, debNormal, IBM_MP2_AUD_CTL, 0x4573, 2); + ibm_send_command(saa, IBM_MP2_PLAY, 0, 0); + /* enable buffer threshold irq */ + debiwrite(saa, debNormal, IBM_MP2_MASK0, 0xc00c, 2); + /* clear pending interrupts */ + debiread(saa, debNormal, IBM_MP2_HOST_INT, 2); + debiwrite(saa, debNormal, XILINX_CTL0, 0x1711, 2); + return 0; +} + +/* load the decoder microcode */ +static int initialize_ibmmpeg2(struct video_code *microcode) +{ + int i, num; + struct saa7146 *saa; + + for (num = 0; num < saa_num; num++) { + saa = &saa7146s[num]; + /* check that FPGA is loaded */ + debiwrite(saa, debNormal, IBM_MP2_OSD_SIZE, 0xa55a, 2); + if ((i = debiread(saa, debNormal, IBM_MP2_OSD_SIZE, 2)) != + 0xa55a) { + printk(KERN_INFO "stradis%d: %04x != 0xa55a\n", + saa->nr, i); +#if 0 + return -1; +#endif + } + if (!strncmp(microcode->loadwhat, "decoder.vid", 11)) { + if (saa->boardcfg[0] > 27) + continue; /* skip to next card */ + /* load video control store */ + saa->boardcfg[1] = 0x13; /* no-sync default */ + debiwrite(saa, debNormal, IBM_MP2_WR_PROT, 1, 2); + debiwrite(saa, debNormal, IBM_MP2_PROC_IADDR, 0, 2); + for (i = 0; i < microcode->datasize / 2; i++) + debiwrite(saa, debNormal, IBM_MP2_PROC_IDATA, + (microcode->data[i * 2] << 8) | + microcode->data[i * 2 + 1], 2); + debiwrite(saa, debNormal, IBM_MP2_PROC_IADDR, 0, 2); + debiwrite(saa, debNormal, IBM_MP2_WR_PROT, 0, 2); + debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, + ChipControl, 2); + saa->boardcfg[0] = 28; + } + if (!strncmp(microcode->loadwhat, "decoder.aud", 11)) { + if (saa->boardcfg[0] > 35) + continue; /* skip to next card */ + /* load audio control store */ + debiwrite(saa, debNormal, IBM_MP2_WR_PROT, 1, 2); + debiwrite(saa, debNormal, IBM_MP2_AUD_IADDR, 0, 2); + for (i = 0; i < microcode->datasize; i++) + debiwrite(saa, debNormal, IBM_MP2_AUD_IDATA, + microcode->data[i], 1); + debiwrite(saa, debNormal, IBM_MP2_AUD_IADDR, 0, 2); + debiwrite(saa, debNormal, IBM_MP2_WR_PROT, 0, 2); + debiwrite(saa, debNormal, IBM_MP2_OSD_SIZE, 0x2000, 2); + debiwrite(saa, debNormal, IBM_MP2_AUD_CTL, 0x4552, 2); + if (ibm_send_command(saa, IBM_MP2_CONFIG_DECODER, + 0xe000, 1)) { + printk(KERN_ERR + "stradis%d: IBM config failed\n", + saa->nr); + return -1; + } + /* set PWM to center value */ + if (NewCard) { + debiwrite(saa, debNormal, XILINX_PWM, + saa->boardcfg[14] + + (saa->boardcfg[13]<<8), 2); + } else + debiwrite(saa, debNormal, XILINX_PWM, + 0x46, 2); + if (HaveCS3310) { + i = CS3310MaxLvl; + debiwrite(saa, debNormal, + XILINX_CS3310_CMPLT, ((i<<8)|i), 2); + } + printk(KERN_INFO + "stradis%d: IBM MPEGCD%d Initialized\n", + saa->nr, 18 + (debiread(saa, debNormal, + IBM_MP2_CHIP_CONTROL, 2) >> 12)); + /* start video decoder */ + debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, + ChipControl, 2); + debiwrite(saa, debNormal, IBM_MP2_RB_THRESHOLD, + 0x4037, 2); /* 256k vid, 3520 bytes aud */ + debiwrite(saa, debNormal, IBM_MP2_AUD_CTL, 0x4573, 2); + ibm_send_command(saa, IBM_MP2_PLAY, 0, 0); + /* enable buffer threshold irq */ + debiwrite(saa, debNormal, IBM_MP2_MASK0, 0xc00c, 2); + debiread(saa, debNormal, IBM_MP2_HOST_INT, 2); + /* enable gpio irq */ + saawrite(0x00002000, SAA7146_GPIO_CTRL); + /* enable decoder output to HPS */ + debiwrite(saa, debNormal, XILINX_CTL0, 0x1711, 2); + saa->boardcfg[0] = 37; + } + } + return 0; +} + +static u32 palette2fmt[] = +{ /* some of these YUV translations are wrong */ + 0xffffffff, 0x86000000, 0x87000000, 0x80000000, 0x8100000, 0x82000000, + 0x83000000, 0x00000000, 0x03000000, 0x03000000, 0x0a00000, 0x03000000, + 0x06000000, 0x00000000, 0x03000000, 0x0a000000, 0x0300000 +}; +static int bpp2fmt[4] = +{ + VIDEO_PALETTE_HI240, VIDEO_PALETTE_RGB565, VIDEO_PALETTE_RGB24, + VIDEO_PALETTE_RGB32 +}; + +/* I wish I could find a formula to calculate these... */ +static u32 h_prescale[64] = +{ + 0x10000000, 0x18040202, 0x18080000, 0x380c0606, 0x38100204, 0x38140808, + 0x38180000, 0x381c0000, 0x3820161c, 0x38242a3b, 0x38281230, 0x382c4460, + 0x38301040, 0x38340080, 0x38380000, 0x383c0000, 0x3840fefe, 0x3844ee9f, + 0x3848ee9f, 0x384cee9f, 0x3850ee9f, 0x38542a3b, 0x38581230, 0x385c0000, + 0x38600000, 0x38640000, 0x38680000, 0x386c0000, 0x38700000, 0x38740000, + 0x38780000, 0x387c0000, 0x30800000, 0x38840000, 0x38880000, 0x388c0000, + 0x38900000, 0x38940000, 0x38980000, 0x389c0000, 0x38a00000, 0x38a40000, + 0x38a80000, 0x38ac0000, 0x38b00000, 0x38b40000, 0x38b80000, 0x38bc0000, + 0x38c00000, 0x38c40000, 0x38c80000, 0x38cc0000, 0x38d00000, 0x38d40000, + 0x38d80000, 0x38dc0000, 0x38e00000, 0x38e40000, 0x38e80000, 0x38ec0000, + 0x38f00000, 0x38f40000, 0x38f80000, 0x38fc0000, +}; +static u32 v_gain[64] = +{ + 0x016000ff, 0x016100ff, 0x016100ff, 0x016200ff, 0x016200ff, 0x016200ff, + 0x016200ff, 0x016300ff, 0x016300ff, 0x016300ff, 0x016300ff, 0x016300ff, + 0x016300ff, 0x016300ff, 0x016300ff, 0x016400ff, 0x016400ff, 0x016400ff, + 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, + 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, + 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, + 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, + 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, + 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, + 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, + 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, +}; + + +static void saa7146_set_winsize(struct saa7146 *saa) +{ + u32 format; + int offset, yacl, ysci; + saa->win.color_fmt = format = + (saa->win.depth == 15) ? palette2fmt[VIDEO_PALETTE_RGB555] : + palette2fmt[bpp2fmt[(saa->win.bpp - 1) & 3]]; + offset = saa->win.x * saa->win.bpp + saa->win.y * saa->win.bpl; + saawrite(saa->win.vidadr + offset, SAA7146_BASE_EVEN1); + saawrite(saa->win.vidadr + offset + saa->win.bpl, SAA7146_BASE_ODD1); + saawrite(saa->win.bpl * 2, SAA7146_PITCH1); + saawrite(saa->win.vidadr + saa->win.bpl * saa->win.sheight, + SAA7146_PROT_ADDR1); + saawrite(0, SAA7146_PAGE1); + saawrite(format|0x60, SAA7146_CLIP_FORMAT_CTRL); + offset = (704 / (saa->win.width - 1)) & 0x3f; + saawrite(h_prescale[offset], SAA7146_HPS_H_PRESCALE); + offset = (720896 / saa->win.width) / (offset + 1); + saawrite((offset<<12)|0x0c, SAA7146_HPS_H_SCALE); + if (CurrentMode == VIDEO_MODE_NTSC) { + yacl = /*(480 / saa->win.height - 1) & 0x3f*/ 0; + ysci = 1024 - (saa->win.height * 1024 / 480); + } else { + yacl = /*(576 / saa->win.height - 1) & 0x3f*/ 0; + ysci = 1024 - (saa->win.height * 1024 / 576); + } + saawrite((1<<31)|(ysci<<21)|(yacl<<15), SAA7146_HPS_V_SCALE); + saawrite(v_gain[yacl], SAA7146_HPS_V_GAIN); + saawrite(((SAA7146_MC2_UPLD_DMA1 | SAA7146_MC2_UPLD_HPS_V | + SAA7146_MC2_UPLD_HPS_H) << 16) | (SAA7146_MC2_UPLD_DMA1 | + SAA7146_MC2_UPLD_HPS_V | SAA7146_MC2_UPLD_HPS_H), + SAA7146_MC2); +} + +/* clip_draw_rectangle(cm,x,y,w,h) -- handle clipping an area + * bitmap is fixed width, 128 bytes (1024 pixels represented) + * arranged most-sigificant-bit-left in 32-bit words + * based on saa7146 clipping hardware, it swaps bytes if LE + * much of this makes up for egcs brain damage -- so if you + * are wondering "why did he do this?" it is because the C + * was adjusted to generate the optimal asm output without + * writing non-portable __asm__ directives. + */ + +static void clip_draw_rectangle(u32 *clipmap, int x, int y, int w, int h) +{ + register int startword, endword; + register u32 bitsleft, bitsright; + u32 *temp; + if (x < 0) { + w += x; + x = 0; + } + if (y < 0) { + h += y; + y = 0; + } + if (w <= 0 || h <= 0 || x > 1023 || y > 639) + return; /* throw away bad clips */ + if (x + w > 1024) + w = 1024 - x; + if (y + h > 640) + h = 640 - y; + startword = (x >> 5); + endword = ((x + w) >> 5); + bitsleft = (0xffffffff >> (x & 31)); + bitsright = (0xffffffff << (~((x + w) - (endword<<5)))); + temp = &clipmap[(y<<5) + startword]; + w = endword - startword; + if (!w) { + bitsleft |= bitsright; + for (y = 0; y < h; y++) { + *temp |= bitsleft; + temp += 32; + } + } else { + for (y = 0; y < h; y++) { + *temp++ |= bitsleft; + for (x = 1; x < w; x++) + *temp++ = 0xffffffff; + *temp |= bitsright; + temp += (32 - w); + } + } +} + +static void make_clip_tab(struct saa7146 *saa, struct video_clip *cr, int ncr) +{ + int i, width, height; + u32 *clipmap; + + clipmap = saa->dmavid2; + if((width=saa->win.width)>1023) + width = 1023; /* sanity check */ + if((height=saa->win.height)>640) + height = 639; /* sanity check */ + if (ncr > 0) { /* rectangles pased */ + /* convert rectangular clips to a bitmap */ + memset(clipmap, 0, VIDEO_CLIPMAP_SIZE); /* clear map */ + for (i = 0; i < ncr; i++) + clip_draw_rectangle(clipmap, cr[i].x, cr[i].y, + cr[i].width, cr[i].height); + } + /* clip against viewing window AND screen + so we do not have to rely on the user program + */ + clip_draw_rectangle(clipmap,(saa->win.x+width>saa->win.swidth) ? + (saa->win.swidth-saa->win.x) : width, 0, 1024, 768); + clip_draw_rectangle(clipmap,0,(saa->win.y+height>saa->win.sheight) ? + (saa->win.sheight-saa->win.y) : height,1024,768); + if (saa->win.x<0) + clip_draw_rectangle(clipmap, 0, 0, -(saa->win.x), 768); + if (saa->win.y<0) + clip_draw_rectangle(clipmap, 0, 0, 1024, -(saa->win.y)); +} + +static int saa_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long argl) +{ + struct saa7146 *saa = file->private_data; + void __user *arg = (void __user *)argl; + + switch (cmd) { + case VIDIOCGCAP: + { + struct video_capability b; + strcpy(b.name, saa->video_dev.name); + b.type = VID_TYPE_CAPTURE | + VID_TYPE_OVERLAY | + VID_TYPE_CLIPPING | + VID_TYPE_FRAMERAM | + VID_TYPE_SCALES; + b.channels = 1; + b.audios = 1; + b.maxwidth = 768; + b.maxheight = 576; + b.minwidth = 32; + b.minheight = 32; + if (copy_to_user(arg, &b, sizeof(b))) + return -EFAULT; + return 0; + } + case VIDIOCGPICT: + { + struct video_picture p = saa->picture; + if (saa->win.depth == 8) + p.palette = VIDEO_PALETTE_HI240; + if (saa->win.depth == 15) + p.palette = VIDEO_PALETTE_RGB555; + if (saa->win.depth == 16) + p.palette = VIDEO_PALETTE_RGB565; + if (saa->win.depth == 24) + p.palette = VIDEO_PALETTE_RGB24; + if (saa->win.depth == 32) + p.palette = VIDEO_PALETTE_RGB32; + if (copy_to_user(arg, &p, sizeof(p))) + return -EFAULT; + return 0; + } + case VIDIOCSPICT: + { + struct video_picture p; + u32 format; + if (copy_from_user(&p, arg, sizeof(p))) + return -EFAULT; + if (p.palette < sizeof(palette2fmt) / sizeof(u32)) { + format = palette2fmt[p.palette]; + saa->win.color_fmt = format; + saawrite(format|0x60, SAA7146_CLIP_FORMAT_CTRL); + } + saawrite(((p.brightness & 0xff00) << 16) | + ((p.contrast & 0xfe00) << 7) | + ((p.colour & 0xfe00) >> 9), SAA7146_BCS_CTRL); + saa->picture = p; + /* upload changed registers */ + saawrite(((SAA7146_MC2_UPLD_HPS_H | + SAA7146_MC2_UPLD_HPS_V) << 16) | + SAA7146_MC2_UPLD_HPS_H | SAA7146_MC2_UPLD_HPS_V, + SAA7146_MC2); + return 0; + } + case VIDIOCSWIN: + { + struct video_window vw; + struct video_clip *vcp = NULL; + + if (copy_from_user(&vw, arg, sizeof(vw))) + return -EFAULT; + + if (vw.flags || vw.width < 16 || vw.height < 16) { /* stop capture */ + saawrite((SAA7146_MC1_TR_E_1 << 16), SAA7146_MC1); + return -EINVAL; + } + if (saa->win.bpp < 4) { /* 32-bit align start and adjust width */ + int i = vw.x; + vw.x = (vw.x + 3) & ~3; + i = vw.x - i; + vw.width -= i; + } + saa->win.x = vw.x; + saa->win.y = vw.y; + saa->win.width = vw.width; + if (saa->win.width > 768) + saa->win.width = 768; + saa->win.height = vw.height; + if (CurrentMode == VIDEO_MODE_NTSC) { + if (saa->win.height > 480) + saa->win.height = 480; + } else { + if (saa->win.height > 576) + saa->win.height = 576; + } + + /* stop capture */ + saawrite((SAA7146_MC1_TR_E_1 << 16), SAA7146_MC1); + saa7146_set_winsize(saa); + + /* + * Do any clips. + */ + if (vw.clipcount < 0) { + if (copy_from_user(saa->dmavid2, vw.clips, + VIDEO_CLIPMAP_SIZE)) + return -EFAULT; + } + else if (vw.clipcount > 16384) { + return -EINVAL; + } else if (vw.clipcount > 0) { + if ((vcp = vmalloc(sizeof(struct video_clip) * + (vw.clipcount))) == NULL) + return -ENOMEM; + if (copy_from_user(vcp, vw.clips, + sizeof(struct video_clip) * + vw.clipcount)) { + vfree(vcp); + return -EFAULT; + } + } else /* nothing clipped */ + memset(saa->dmavid2, 0, VIDEO_CLIPMAP_SIZE); + make_clip_tab(saa, vcp, vw.clipcount); + if (vw.clipcount > 0) + vfree(vcp); + + /* start capture & clip dma if we have an address */ + if ((saa->cap & 3) && saa->win.vidadr != 0) + saawrite(((SAA7146_MC1_TR_E_1 | + SAA7146_MC1_TR_E_2) << 16) | 0xffff, + SAA7146_MC1); + return 0; + } + case VIDIOCGWIN: + { + struct video_window vw; + vw.x = saa->win.x; + vw.y = saa->win.y; + vw.width = saa->win.width; + vw.height = saa->win.height; + vw.chromakey = 0; + vw.flags = 0; + if (copy_to_user(arg, &vw, sizeof(vw))) + return -EFAULT; + return 0; + } + case VIDIOCCAPTURE: + { + int v; + if (copy_from_user(&v, arg, sizeof(v))) + return -EFAULT; + if (v == 0) { + saa->cap &= ~1; + saawrite((SAA7146_MC1_TR_E_1 << 16), + SAA7146_MC1); + } else { + if (saa->win.vidadr == 0 || saa->win.width == 0 + || saa->win.height == 0) + return -EINVAL; + saa->cap |= 1; + saawrite((SAA7146_MC1_TR_E_1 << 16) | 0xffff, + SAA7146_MC1); + } + return 0; + } + case VIDIOCGFBUF: + { + struct video_buffer v; + v.base = (void *) saa->win.vidadr; + v.height = saa->win.sheight; + v.width = saa->win.swidth; + v.depth = saa->win.depth; + v.bytesperline = saa->win.bpl; + if (copy_to_user(arg, &v, sizeof(v))) + return -EFAULT; + return 0; + + } + case VIDIOCSFBUF: + { + struct video_buffer v; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + if (copy_from_user(&v, arg, sizeof(v))) + return -EFAULT; + if (v.depth != 8 && v.depth != 15 && v.depth != 16 && + v.depth != 24 && v.depth != 32 && v.width > 16 && + v.height > 16 && v.bytesperline > 16) + return -EINVAL; + if (v.base) + saa->win.vidadr = (unsigned long) v.base; + saa->win.sheight = v.height; + saa->win.swidth = v.width; + saa->win.bpp = ((v.depth + 7) & 0x38) / 8; + saa->win.depth = v.depth; + saa->win.bpl = v.bytesperline; + + DEBUG(printk("Display at %p is %d by %d, bytedepth %d, bpl %d\n", + v.base, v.width, v.height, saa->win.bpp, saa->win.bpl)); + saa7146_set_winsize(saa); + return 0; + } + case VIDIOCKEY: + { + /* Will be handled higher up .. */ + return 0; + } + + case VIDIOCGAUDIO: + { + struct video_audio v; + v = saa->audio_dev; + v.flags &= ~(VIDEO_AUDIO_MUTE | VIDEO_AUDIO_MUTABLE); + v.flags |= VIDEO_AUDIO_MUTABLE | VIDEO_AUDIO_VOLUME; + strcpy(v.name, "MPEG"); + v.mode = VIDEO_SOUND_STEREO; + if (copy_to_user(arg, &v, sizeof(v))) + return -EFAULT; + return 0; + } + case VIDIOCSAUDIO: + { + struct video_audio v; + int i; + if (copy_from_user(&v, arg, sizeof(v))) + return -EFAULT; + i = (~(v.volume>>8))&0xff; + if (!HaveCS4341) { + if (v.flags & VIDEO_AUDIO_MUTE) { + debiwrite(saa, debNormal, + IBM_MP2_FRNT_ATTEN, + 0xffff, 2); + } + if (!(v.flags & VIDEO_AUDIO_MUTE)) + debiwrite(saa, debNormal, + IBM_MP2_FRNT_ATTEN, + 0x0000, 2); + if (v.flags & VIDEO_AUDIO_VOLUME) + debiwrite(saa, debNormal, + IBM_MP2_FRNT_ATTEN, + (i<<8)|i, 2); + } else { + if (v.flags & VIDEO_AUDIO_MUTE) + cs4341_setlevel(saa, 0xff, 0xff); + if (!(v.flags & VIDEO_AUDIO_MUTE)) + cs4341_setlevel(saa, 0, 0); + if (v.flags & VIDEO_AUDIO_VOLUME) + cs4341_setlevel(saa, i, i); + } + saa->audio_dev = v; + return 0; + } + + case VIDIOCGUNIT: + { + struct video_unit vu; + vu.video = saa->video_dev.minor; + vu.vbi = VIDEO_NO_UNIT; + vu.radio = VIDEO_NO_UNIT; + vu.audio = VIDEO_NO_UNIT; + vu.teletext = VIDEO_NO_UNIT; + if (copy_to_user(arg, &vu, sizeof(vu))) + return -EFAULT; + return 0; + } + case VIDIOCSPLAYMODE: + { + struct video_play_mode pmode; + if (copy_from_user((void *) &pmode, arg, + sizeof(struct video_play_mode))) + return -EFAULT; + switch (pmode.mode) { + case VID_PLAY_VID_OUT_MODE: + if (pmode.p1 != VIDEO_MODE_NTSC && + pmode.p1 != VIDEO_MODE_PAL) + return -EINVAL; + set_out_format(saa, pmode.p1); + return 0; + case VID_PLAY_GENLOCK: + debiwrite(saa, debNormal, + XILINX_CTL0, + (pmode.p1 ? 0x8000 : 0x8080), + 2); + if (NewCard) + set_genlock_offset(saa, + pmode.p2); + return 0; + case VID_PLAY_NORMAL: + debiwrite(saa, debNormal, + IBM_MP2_CHIP_CONTROL, + ChipControl, 2); + ibm_send_command(saa, + IBM_MP2_PLAY, 0, 0); + saa->playmode = pmode.mode; + return 0; + case VID_PLAY_PAUSE: + /* IBM removed the PAUSE command */ + /* they say use SINGLE_FRAME now */ + case VID_PLAY_SINGLE_FRAME: + ibm_send_command(saa, + IBM_MP2_SINGLE_FRAME, + 0, 0); + if (saa->playmode == pmode.mode) { + debiwrite(saa, debNormal, + IBM_MP2_CHIP_CONTROL, + ChipControl, 2); + } + saa->playmode = pmode.mode; + return 0; + case VID_PLAY_FAST_FORWARD: + ibm_send_command(saa, + IBM_MP2_FAST_FORWARD, 0, 0); + saa->playmode = pmode.mode; + return 0; + case VID_PLAY_SLOW_MOTION: + ibm_send_command(saa, + IBM_MP2_SLOW_MOTION, + pmode.p1, 0); + saa->playmode = pmode.mode; + return 0; + case VID_PLAY_IMMEDIATE_NORMAL: + /* ensure transfers resume */ + debiwrite(saa, debNormal, + IBM_MP2_CHIP_CONTROL, + ChipControl, 2); + ibm_send_command(saa, + IBM_MP2_IMED_NORM_PLAY, 0, 0); + saa->playmode = VID_PLAY_NORMAL; + return 0; + case VID_PLAY_SWITCH_CHANNELS: + saa->audhead = saa->audtail = 0; + saa->vidhead = saa->vidtail = 0; + ibm_send_command(saa, + IBM_MP2_FREEZE_FRAME, 0, 1); + ibm_send_command(saa, + IBM_MP2_RESET_AUD_RATE, 0, 1); + debiwrite(saa, debNormal, + IBM_MP2_CHIP_CONTROL, 0, 2); + ibm_send_command(saa, + IBM_MP2_CHANNEL_SWITCH, 0, 1); + debiwrite(saa, debNormal, + IBM_MP2_CHIP_CONTROL, + ChipControl, 2); + ibm_send_command(saa, + IBM_MP2_PLAY, 0, 0); + saa->playmode = VID_PLAY_NORMAL; + return 0; + case VID_PLAY_FREEZE_FRAME: + ibm_send_command(saa, + IBM_MP2_FREEZE_FRAME, 0, 0); + saa->playmode = pmode.mode; + return 0; + case VID_PLAY_STILL_MODE: + ibm_send_command(saa, + IBM_MP2_SET_STILL_MODE, 0, 0); + saa->playmode = pmode.mode; + return 0; + case VID_PLAY_MASTER_MODE: + if (pmode.p1 == VID_PLAY_MASTER_NONE) + saa->boardcfg[1] = 0x13; + else if (pmode.p1 == + VID_PLAY_MASTER_VIDEO) + saa->boardcfg[1] = 0x23; + else if (pmode.p1 == + VID_PLAY_MASTER_AUDIO) + saa->boardcfg[1] = 0x43; + else + return -EINVAL; + debiwrite(saa, debNormal, + IBM_MP2_CHIP_CONTROL, + ChipControl, 2); + return 0; + case VID_PLAY_ACTIVE_SCANLINES: + if (CurrentMode == VIDEO_MODE_PAL) { + if (pmode.p1 < 1 || + pmode.p2 > 625) + return -EINVAL; + saa->boardcfg[5] = pmode.p1; + saa->boardcfg[55] = (pmode.p1 + + (pmode.p2/2) - 1) & + 0xff; + } else { + if (pmode.p1 < 4 || + pmode.p2 > 525) + return -EINVAL; + saa->boardcfg[4] = pmode.p1; + saa->boardcfg[54] = (pmode.p1 + + (pmode.p2/2) - 4) & + 0xff; + } + set_out_format(saa, CurrentMode); + case VID_PLAY_RESET: + return do_ibm_reset(saa); + case VID_PLAY_END_MARK: + if (saa->endmarktail < + saa->endmarkhead) { + if (saa->endmarkhead - + saa->endmarktail < 2) + return -ENOSPC; + } else if (saa->endmarkhead <= + saa->endmarktail) { + if (saa->endmarktail - + saa->endmarkhead > + (MAX_MARKS - 2)) + return -ENOSPC; + } else + return -ENOSPC; + saa->endmark[saa->endmarktail] = + saa->audtail; + saa->endmarktail++; + if (saa->endmarktail >= MAX_MARKS) + saa->endmarktail = 0; + } + return -EINVAL; + } + case VIDIOCSWRITEMODE: + { + int mode; + if (copy_from_user((void *) &mode, arg, sizeof(int))) + return -EFAULT; + if (mode == VID_WRITE_MPEG_AUD || + mode == VID_WRITE_MPEG_VID || + mode == VID_WRITE_CC || + mode == VID_WRITE_TTX || + mode == VID_WRITE_OSD) { + saa->writemode = mode; + return 0; + } + return -EINVAL; + } + case VIDIOCSMICROCODE: + { + struct video_code ucode; + __u8 *udata; + int i; + if (copy_from_user(&ucode, arg, sizeof(ucode))) + return -EFAULT; + if (ucode.datasize > 65536 || ucode.datasize < 1024 || + strncmp(ucode.loadwhat, "dec", 3)) + return -EINVAL; + if ((udata = vmalloc(ucode.datasize)) == NULL) + return -ENOMEM; + if (copy_from_user(udata, ucode.data, ucode.datasize)) { + vfree(udata); + return -EFAULT; + } + ucode.data = udata; + if (!strncmp(ucode.loadwhat, "decoder.aud", 11) + || !strncmp(ucode.loadwhat, "decoder.vid", 11)) + i = initialize_ibmmpeg2(&ucode); + else + i = initialize_fpga(&ucode); + vfree(udata); + if (i) + return -EINVAL; + return 0; + + } + case VIDIOCGCHAN: /* this makes xawtv happy */ + { + struct video_channel v; + if (copy_from_user(&v, arg, sizeof(v))) + return -EFAULT; + v.flags = VIDEO_VC_AUDIO; + v.tuners = 0; + v.type = VID_TYPE_MPEG_DECODER; + v.norm = CurrentMode; + strcpy(v.name, "MPEG2"); + if (copy_to_user(arg, &v, sizeof(v))) + return -EFAULT; + return 0; + } + case VIDIOCSCHAN: /* this makes xawtv happy */ + { + struct video_channel v; + if (copy_from_user(&v, arg, sizeof(v))) + return -EFAULT; + /* do nothing */ + return 0; + } + default: + return -ENOIOCTLCMD; + } + return 0; +} + +static int saa_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct saa7146 *saa = file->private_data; + printk(KERN_DEBUG "stradis%d: saa_mmap called\n", saa->nr); + return -EINVAL; +} + +static ssize_t saa_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + return -EINVAL; +} + +static ssize_t saa_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + struct saa7146 *saa = file->private_data; + unsigned long todo = count; + int blocksize, split; + unsigned long flags; + + while (todo > 0) { + if (saa->writemode == VID_WRITE_MPEG_AUD) { + spin_lock_irqsave(&saa->lock, flags); + if (saa->audhead <= saa->audtail) + blocksize = 65536-(saa->audtail - saa->audhead); + else + blocksize = saa->audhead - saa->audtail; + spin_unlock_irqrestore(&saa->lock, flags); + if (blocksize < 16384) { + saawrite(SAA7146_PSR_DEBI_S | + SAA7146_PSR_PIN1, SAA7146_IER); + saawrite(SAA7146_PSR_PIN1, SAA7146_PSR); + /* wait for buffer space to open */ + interruptible_sleep_on(&saa->audq); + } + spin_lock_irqsave(&saa->lock, flags); + if (saa->audhead <= saa->audtail) { + blocksize = 65536-(saa->audtail - saa->audhead); + split = 65536 - saa->audtail; + } else { + blocksize = saa->audhead - saa->audtail; + split = 65536; + } + spin_unlock_irqrestore(&saa->lock, flags); + blocksize--; + if (blocksize > todo) + blocksize = todo; + /* double check that we really have space */ + if (!blocksize) + return -ENOSPC; + if (split < blocksize) { + if (copy_from_user(saa->audbuf + + saa->audtail, buf, split)) + return -EFAULT; + buf += split; + todo -= split; + blocksize -= split; + saa->audtail = 0; + } + if (copy_from_user(saa->audbuf + saa->audtail, buf, + blocksize)) + return -EFAULT; + saa->audtail += blocksize; + todo -= blocksize; + buf += blocksize; + saa->audtail &= 0xffff; + } else if (saa->writemode == VID_WRITE_MPEG_VID) { + spin_lock_irqsave(&saa->lock, flags); + if (saa->vidhead <= saa->vidtail) + blocksize=524288-(saa->vidtail - saa->vidhead); + else + blocksize = saa->vidhead - saa->vidtail; + spin_unlock_irqrestore(&saa->lock, flags); + if (blocksize < 65536) { + saawrite(SAA7146_PSR_DEBI_S | + SAA7146_PSR_PIN1, SAA7146_IER); + saawrite(SAA7146_PSR_PIN1, SAA7146_PSR); + /* wait for buffer space to open */ + interruptible_sleep_on(&saa->vidq); + } + spin_lock_irqsave(&saa->lock, flags); + if (saa->vidhead <= saa->vidtail) { + blocksize=524288-(saa->vidtail - saa->vidhead); + split = 524288 - saa->vidtail; + } else { + blocksize = saa->vidhead - saa->vidtail; + split = 524288; + } + spin_unlock_irqrestore(&saa->lock, flags); + blocksize--; + if (blocksize > todo) + blocksize = todo; + /* double check that we really have space */ + if (!blocksize) + return -ENOSPC; + if (split < blocksize) { + if (copy_from_user(saa->vidbuf + + saa->vidtail, buf, split)) + return -EFAULT; + buf += split; + todo -= split; + blocksize -= split; + saa->vidtail = 0; + } + if (copy_from_user(saa->vidbuf + saa->vidtail, buf, + blocksize)) + return -EFAULT; + saa->vidtail += blocksize; + todo -= blocksize; + buf += blocksize; + saa->vidtail &= 0x7ffff; + } else if (saa->writemode == VID_WRITE_OSD) { + if (count > 131072) + return -ENOSPC; + if (copy_from_user(saa->osdbuf, buf, count)) + return -EFAULT; + buf += count; + saa->osdhead = 0; + saa->osdtail = count; + debiwrite(saa, debNormal, IBM_MP2_OSD_ADDR, 0, 2); + debiwrite(saa, debNormal, IBM_MP2_OSD_LINK_ADDR, 0, 2); + debiwrite(saa, debNormal, IBM_MP2_MASK0, 0xc00d, 2); + debiwrite(saa, debNormal, IBM_MP2_DISP_MODE, + debiread(saa, debNormal, + IBM_MP2_DISP_MODE, 2) | 1, 2); + /* trigger osd data transfer */ + saawrite(SAA7146_PSR_DEBI_S | + SAA7146_PSR_PIN1, SAA7146_IER); + saawrite(SAA7146_PSR_PIN1, SAA7146_PSR); + } + } + return count; +} + +static int saa_open(struct inode *inode, struct file *file) +{ + struct saa7146 *saa = NULL; + unsigned int minor = iminor(inode); + int i; + + for (i = 0; i < SAA7146_MAX; i++) { + if (saa7146s[i].video_dev.minor == minor) { + saa = &saa7146s[i]; + } + } + if (saa == NULL) { + return -ENODEV; + } + file->private_data = saa; + + //saa->video_dev.busy = 0; /* old hack to support multiple open */ + saa->user++; + if (saa->user > 1) + return 0; /* device open already, don't reset */ + saa->writemode = VID_WRITE_MPEG_VID; /* default to video */ + return 0; +} + +static int saa_release(struct inode *inode, struct file *file) +{ + struct saa7146 *saa = file->private_data; + saa->user--; + //saa->video_dev.busy = 0; /* old hack to support multiple open */ + if (saa->user > 0) /* still someone using device */ + return 0; + saawrite(0x007f0000, SAA7146_MC1); /* stop all overlay dma */ + return 0; +} + +static struct file_operations saa_fops = +{ + .owner = THIS_MODULE, + .open = saa_open, + .release = saa_release, + .ioctl = saa_ioctl, + .read = saa_read, + .llseek = no_llseek, + .write = saa_write, + .mmap = saa_mmap, +}; + +/* template for video_device-structure */ +static struct video_device saa_template = +{ + .name = "SAA7146A", + .type = VID_TYPE_CAPTURE | VID_TYPE_OVERLAY, + .hardware = VID_HARDWARE_SAA7146, + .fops = &saa_fops, + .minor = -1, +}; + +static int configure_saa7146(struct pci_dev *dev, int num) +{ + int result; + struct saa7146 *saa; + + saa = &saa7146s[num]; + + saa->endmarkhead = saa->endmarktail = 0; + saa->win.x = saa->win.y = 0; + saa->win.width = saa->win.cropwidth = 720; + saa->win.height = saa->win.cropheight = 480; + saa->win.cropx = saa->win.cropy = 0; + saa->win.bpp = 2; + saa->win.depth = 16; + saa->win.color_fmt = palette2fmt[VIDEO_PALETTE_RGB565]; + saa->win.bpl = 1024 * saa->win.bpp; + saa->win.swidth = 1024; + saa->win.sheight = 768; + saa->picture.brightness = 32768; + saa->picture.contrast = 38768; + saa->picture.colour = 32768; + saa->cap = 0; + saa->dev = dev; + saa->nr = num; + saa->playmode = VID_PLAY_NORMAL; + memset(saa->boardcfg, 0, 64); /* clear board config area */ + saa->saa7146_mem = NULL; + saa->dmavid1 = saa->dmavid2 = saa->dmavid3 = saa->dmaa1in = + saa->dmaa1out = saa->dmaa2in = saa->dmaa2out = + saa->pagevid1 = saa->pagevid2 = saa->pagevid3 = saa->pagea1in = + saa->pagea1out = saa->pagea2in = saa->pagea2out = + saa->pagedebi = saa->dmaRPS1 = saa->dmaRPS2 = saa->pageRPS1 = + saa->pageRPS2 = NULL; + saa->audbuf = saa->vidbuf = saa->osdbuf = saa->dmadebi = NULL; + saa->audhead = saa->vidtail = 0; + + init_waitqueue_head(&saa->i2cq); + init_waitqueue_head(&saa->audq); + init_waitqueue_head(&saa->debiq); + init_waitqueue_head(&saa->vidq); + spin_lock_init(&saa->lock); + + if (pci_enable_device(dev)) + return -EIO; + + saa->id = dev->device; + saa->irq = dev->irq; + saa->video_dev.minor = -1; + saa->saa7146_adr = pci_resource_start(dev, 0); + pci_read_config_byte(dev, PCI_CLASS_REVISION, &saa->revision); + + saa->saa7146_mem = ioremap(saa->saa7146_adr, 0x200); + if (!saa->saa7146_mem) + return -EIO; + + memcpy(&saa->video_dev, &saa_template, sizeof(saa_template)); + saawrite(0, SAA7146_IER); /* turn off all interrupts */ + result = request_irq(saa->irq, saa7146_irq, + SA_SHIRQ | SA_INTERRUPT, "stradis", (void *) saa); + if (result == -EINVAL) + printk(KERN_ERR "stradis%d: Bad irq number or handler\n", + num); + if (result == -EBUSY) + printk(KERN_ERR "stradis%d: IRQ %ld busy, change your PnP" + " config in BIOS\n", num, saa->irq); + if (result < 0) { + iounmap(saa->saa7146_mem); + return result; + } + pci_set_master(dev); + if (video_register_device(&saa->video_dev, VFL_TYPE_GRABBER, video_nr) < 0) { + iounmap(saa->saa7146_mem); + return -1; + } + return 0; +} + +static int init_saa7146(int i) +{ + struct saa7146 *saa = &saa7146s[i]; + + saa->user = 0; + /* reset the saa7146 */ + saawrite(0xffff0000, SAA7146_MC1); + mdelay(5); + /* enable debi and i2c transfers and pins */ + saawrite(((SAA7146_MC1_EDP | SAA7146_MC1_EI2C | + SAA7146_MC1_TR_E_DEBI) << 16) | 0xffff, SAA7146_MC1); + /* ensure proper state of chip */ + saawrite(0x00000000, SAA7146_PAGE1); + saawrite(0x00f302c0, SAA7146_NUM_LINE_BYTE1); + saawrite(0x00000000, SAA7146_PAGE2); + saawrite(0x01400080, SAA7146_NUM_LINE_BYTE2); + saawrite(0x00000000, SAA7146_DD1_INIT); + saawrite(0x00000000, SAA7146_DD1_STREAM_B); + saawrite(0x00000000, SAA7146_DD1_STREAM_A); + saawrite(0x00000000, SAA7146_BRS_CTRL); + saawrite(0x80400040, SAA7146_BCS_CTRL); + saawrite(0x0000e000 /*| (1<<29)*/, SAA7146_HPS_CTRL); + saawrite(0x00000060, SAA7146_CLIP_FORMAT_CTRL); + saawrite(0x00000000, SAA7146_ACON1); + saawrite(0x00000000, SAA7146_ACON2); + saawrite(0x00000600, SAA7146_I2C_STATUS); + saawrite(((SAA7146_MC2_UPLD_D1_B | SAA7146_MC2_UPLD_D1_A | + SAA7146_MC2_UPLD_BRS | SAA7146_MC2_UPLD_HPS_H | + SAA7146_MC2_UPLD_HPS_V | SAA7146_MC2_UPLD_DMA2 | + SAA7146_MC2_UPLD_DMA1 | SAA7146_MC2_UPLD_I2C) << 16) | 0xffff, + SAA7146_MC2); + /* setup arbitration control registers */ + saawrite(0x1412121a, SAA7146_PCI_BT_V1); + + /* allocate 32k dma buffer + 4k for page table */ + if ((saa->dmadebi = kmalloc(32768 + 4096, GFP_KERNEL)) == NULL) { + printk(KERN_ERR "stradis%d: debi kmalloc failed\n", i); + return -1; + } +#if 0 + saa->pagedebi = saa->dmadebi + 32768; /* top 4k is for mmu */ + saawrite(virt_to_bus(saa->pagedebi) /*|0x800 */ , SAA7146_DEBI_PAGE); + for (i = 0; i < 12; i++) /* setup mmu page table */ + saa->pagedebi[i] = virt_to_bus((saa->dmadebi + i * 4096)); +#endif + saa->audhead = saa->vidhead = saa->osdhead = 0; + saa->audtail = saa->vidtail = saa->osdtail = 0; + if (saa->vidbuf == NULL) + if ((saa->vidbuf = vmalloc(524288)) == NULL) { + printk(KERN_ERR "stradis%d: malloc failed\n", saa->nr); + return -ENOMEM; + } + if (saa->audbuf == NULL) + if ((saa->audbuf = vmalloc(65536)) == NULL) { + printk(KERN_ERR "stradis%d: malloc failed\n", saa->nr); + vfree(saa->vidbuf); + saa->vidbuf = NULL; + return -ENOMEM; + } + if (saa->osdbuf == NULL) + if ((saa->osdbuf = vmalloc(131072)) == NULL) { + printk(KERN_ERR "stradis%d: malloc failed\n", saa->nr); + vfree(saa->vidbuf); + vfree(saa->audbuf); + saa->vidbuf = saa->audbuf = NULL; + return -ENOMEM; + } + /* allocate 81920 byte buffer for clipping */ + if ((saa->dmavid2 = kmalloc(VIDEO_CLIPMAP_SIZE, GFP_KERNEL)) == NULL) { + printk(KERN_ERR "stradis%d: clip kmalloc failed\n", saa->nr); + vfree(saa->vidbuf); + vfree(saa->audbuf); + vfree(saa->osdbuf); + saa->vidbuf = saa->audbuf = saa->osdbuf = NULL; + saa->dmavid2 = NULL; + return -1; + } + memset(saa->dmavid2, 0x00, VIDEO_CLIPMAP_SIZE); /* clip everything */ + /* setup clipping registers */ + saawrite(virt_to_bus(saa->dmavid2), SAA7146_BASE_EVEN2); + saawrite(virt_to_bus(saa->dmavid2) + 128, SAA7146_BASE_ODD2); + saawrite(virt_to_bus(saa->dmavid2) + VIDEO_CLIPMAP_SIZE, + SAA7146_PROT_ADDR2); + saawrite(256, SAA7146_PITCH2); + saawrite(4, SAA7146_PAGE2); /* dma direction: read, no byteswap */ + saawrite(((SAA7146_MC2_UPLD_DMA2) << 16) | SAA7146_MC2_UPLD_DMA2, + SAA7146_MC2); + I2CBusScan(saa); + return 0; +} + +static void release_saa(void) +{ + u8 command; + int i; + struct saa7146 *saa; + + for (i = 0; i < saa_num; i++) { + saa = &saa7146s[i]; + + /* turn off all capturing, DMA and IRQs */ + saawrite(0xffff0000, SAA7146_MC1); /* reset chip */ + saawrite(0, SAA7146_MC2); + saawrite(0, SAA7146_IER); + saawrite(0xffffffffUL, SAA7146_ISR); + + /* disable PCI bus-mastering */ + pci_read_config_byte(saa->dev, PCI_COMMAND, &command); + command &= ~PCI_COMMAND_MASTER; + pci_write_config_byte(saa->dev, PCI_COMMAND, command); + + /* unmap and free memory */ + saa->audhead = saa->audtail = saa->osdhead = 0; + saa->vidhead = saa->vidtail = saa->osdtail = 0; + vfree(saa->vidbuf); + vfree(saa->audbuf); + vfree(saa->osdbuf); + if (saa->dmavid2) + kfree((void *) saa->dmavid2); + saa->audbuf = saa->vidbuf = saa->osdbuf = NULL; + saa->dmavid2 = NULL; + if (saa->dmadebi) + kfree((void *) saa->dmadebi); + if (saa->dmavid1) + kfree((void *) saa->dmavid1); + if (saa->dmavid2) + kfree((void *) saa->dmavid2); + if (saa->dmavid3) + kfree((void *) saa->dmavid3); + if (saa->dmaa1in) + kfree((void *) saa->dmaa1in); + if (saa->dmaa1out) + kfree((void *) saa->dmaa1out); + if (saa->dmaa2in) + kfree((void *) saa->dmaa2in); + if (saa->dmaa2out) + kfree((void *) saa->dmaa2out); + if (saa->dmaRPS1) + kfree((void *) saa->dmaRPS1); + if (saa->dmaRPS2) + kfree((void *) saa->dmaRPS2); + free_irq(saa->irq, saa); + if (saa->saa7146_mem) + iounmap(saa->saa7146_mem); + if (saa->video_dev.minor != -1) + video_unregister_device(&saa->video_dev); + } +} + + +static int __init stradis_init (void) +{ + struct pci_dev *dev = NULL; + int result = 0, i; + + saa_num = 0; + + while ((dev = pci_find_device(PCI_VENDOR_ID_PHILIPS, PCI_DEVICE_ID_PHILIPS_SAA7146, dev))) { + if (!dev->subsystem_vendor) + printk(KERN_INFO "stradis%d: rev1 decoder\n", saa_num); + else + printk(KERN_INFO "stradis%d: SDM2xx found\n", saa_num); + result = configure_saa7146(dev, saa_num++); + if (result) + return result; + } + if (saa_num) + printk(KERN_INFO "stradis: %d card(s) found.\n", saa_num); + else + return -EINVAL; + for (i = 0; i < saa_num; i++) + if (init_saa7146(i) < 0) { + release_saa(); + return -EIO; + } + return 0; +} + + +static void __exit stradis_exit (void) +{ + release_saa(); + printk(KERN_INFO "stradis: module cleanup complete\n"); +} + + +module_init(stradis_init); +module_exit(stradis_exit); + -- cgit v1.2.3-70-g09d2