From 8e8bd229eef385ab420d4fa51c611d4ddc7cb0c8 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 3 Sep 2008 16:46:36 -0300 Subject: V4L/DVB (8556): au0828: add support for Hauppauge Woodbury Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/au0828/Kconfig | 1 + drivers/media/video/au0828/au0828-cards.c | 7 +++++++ drivers/media/video/au0828/au0828-cards.h | 1 + drivers/media/video/au0828/au0828-dvb.c | 21 +++++++++++++++++++++ 4 files changed, 30 insertions(+) (limited to 'drivers/media/video') diff --git a/drivers/media/video/au0828/Kconfig b/drivers/media/video/au0828/Kconfig index ed9a50f189f..018f72b8e3e 100644 --- a/drivers/media/video/au0828/Kconfig +++ b/drivers/media/video/au0828/Kconfig @@ -7,6 +7,7 @@ config VIDEO_AU0828 select DVB_AU8522 if !DVB_FE_CUSTOMIZE select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE select MEDIA_TUNER_MXL5007T if !DVB_FE_CUSTOMIZE + select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE ---help--- This is a video4linux driver for Auvitek's USB device. diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c index 443e5900976..14b9fc9bb62 100644 --- a/drivers/media/video/au0828/au0828-cards.c +++ b/drivers/media/video/au0828/au0828-cards.c @@ -38,6 +38,9 @@ struct au0828_board au0828_boards[] = { [AU0828_BOARD_DVICO_FUSIONHDTV7] = { .name = "DViCO FusionHDTV USB", }, + [AU0828_BOARD_HAUPPAUGE_WOODBURY] = { + .name = "Hauppauge Woodbury", + }, }; /* Tuner callback function for au0828 boards. Currently only needed @@ -115,6 +118,7 @@ void au0828_card_setup(struct au0828_dev *dev) case AU0828_BOARD_HAUPPAUGE_HVR850: case AU0828_BOARD_HAUPPAUGE_HVR950Q: case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL: + case AU0828_BOARD_HAUPPAUGE_WOODBURY: if (dev->i2c_rc == 0) hauppauge_eeprom(dev, eeprom+0xa0); break; @@ -134,6 +138,7 @@ void au0828_gpio_setup(struct au0828_dev *dev) case AU0828_BOARD_HAUPPAUGE_HVR850: case AU0828_BOARD_HAUPPAUGE_HVR950Q: case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL: + case AU0828_BOARD_HAUPPAUGE_WOODBURY: /* GPIO's * 4 - CS5340 * 5 - AU8522 Demodulator @@ -205,6 +210,8 @@ struct usb_device_id au0828_usb_id_table [] = { .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL }, { USB_DEVICE(0x2040, 0x7281), .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL }, + { USB_DEVICE(0x2040, 0x8200), + .driver_info = AU0828_BOARD_HAUPPAUGE_WOODBURY }, { }, }; diff --git a/drivers/media/video/au0828/au0828-cards.h b/drivers/media/video/au0828/au0828-cards.h index c37f5fd0fa8..102ed03dc6b 100644 --- a/drivers/media/video/au0828/au0828-cards.h +++ b/drivers/media/video/au0828/au0828-cards.h @@ -24,3 +24,4 @@ #define AU0828_BOARD_HAUPPAUGE_HVR850 2 #define AU0828_BOARD_DVICO_FUSIONHDTV7 3 #define AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL 4 +#define AU0828_BOARD_HAUPPAUGE_WOODBURY 5 diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/video/au0828/au0828-dvb.c index 584a83a94a2..c862f9e4d2f 100644 --- a/drivers/media/video/au0828/au0828-dvb.c +++ b/drivers/media/video/au0828/au0828-dvb.c @@ -29,6 +29,7 @@ #include "au8522.h" #include "xc5000.h" #include "mxl5007t.h" +#include "tda18271.h" DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); @@ -40,6 +41,13 @@ static struct au8522_config hauppauge_hvr950q_config = { .status_mode = AU8522_DEMODLOCKING, }; +static struct au8522_config hauppauge_woodbury_config = { + .demod_address = 0x8e >> 1, + .status_mode = AU8522_DEMODLOCKING, + .qam_if = AU8522_IF_4MHZ, + .vsb_if = AU8522_IF_3_25MHZ, +}; + static struct xc5000_config hauppauge_hvr950q_tunerconfig = { .i2c_address = 0x61, .if_khz = 6000, @@ -51,6 +59,10 @@ static struct mxl5007t_config mxl5007t_hvr950q_config = { .if_freq_hz = MxL_IF_6_MHZ, }; +static struct tda18271_config hauppauge_woodbury_tunerconfig = { + .gate = TDA18271_GATE_DIGITAL, +}; + /*-------------------------------------------------------------------*/ static void urb_completion(struct urb *purb) { @@ -357,6 +369,15 @@ int au0828_dvb_register(struct au0828_dev *dev) &dev->i2c_adap, 0x60, &mxl5007t_hvr950q_config); break; + case AU0828_BOARD_HAUPPAUGE_WOODBURY: + dvb->frontend = dvb_attach(au8522_attach, + &hauppauge_woodbury_config, + &dev->i2c_adap); + if (dvb->frontend != NULL) + dvb_attach(tda18271_attach, dvb->frontend, + 0x60, &dev->i2c_adap, + &hauppauge_woodbury_tunerconfig); + break; default: printk(KERN_WARNING "The frontend of your DVB/ATSC card " "isn't supported yet\n"); -- cgit v1.2.3-70-g09d2