From 27d35fc3fb06284edec8a3c9f6872a1ce7405a48 Mon Sep 17 00:00:00 2001 From: Adam Baker Date: Fri, 6 Feb 2009 15:12:46 -0300 Subject: V4L/DVB (10639): gspca - sq905: New subdriver. Add initial support for cameras based on the SQ Technologies SQ-905 chipset (USB ID 2770:9120) to V4L2 using the gspca infrastructure. Currently only supports one resolution and doesn't attempt to inform libv4l what image flipping options are needed. Signed-off-by: Adam Baker Signed-off-by: Theodore Kilgore Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/Kconfig | 9 + drivers/media/video/gspca/Makefile | 2 + drivers/media/video/gspca/sq905.c | 438 +++++++++++++++++++++++++++++++++++++ 3 files changed, 449 insertions(+) create mode 100644 drivers/media/video/gspca/sq905.c (limited to 'drivers/media') diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig index 11c5d2fc20d..a0f05ef5ca7 100644 --- a/drivers/media/video/gspca/Kconfig +++ b/drivers/media/video/gspca/Kconfig @@ -176,6 +176,15 @@ config USB_GSPCA_SPCA561 To compile this driver as a module, choose M here: the module will be called gspca_spca561. +config USB_GSPCA_SQ905 + tristate "SQ Technologies SQ905 based USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the SQ905 chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_sq905. + config USB_GSPCA_STK014 tristate "Syntek DV4000 (STK014) USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile index b3cbcc1764f..b6ec6118573 100644 --- a/drivers/media/video/gspca/Makefile +++ b/drivers/media/video/gspca/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_USB_GSPCA_SPCA505) += gspca_spca505.o obj-$(CONFIG_USB_GSPCA_SPCA506) += gspca_spca506.o obj-$(CONFIG_USB_GSPCA_SPCA508) += gspca_spca508.o obj-$(CONFIG_USB_GSPCA_SPCA561) += gspca_spca561.o +obj-$(CONFIG_USB_GSPCA_SQ905) += gspca_sq905.o obj-$(CONFIG_USB_GSPCA_SUNPLUS) += gspca_sunplus.o obj-$(CONFIG_USB_GSPCA_STK014) += gspca_stk014.o obj-$(CONFIG_USB_GSPCA_T613) += gspca_t613.o @@ -41,6 +42,7 @@ gspca_spca505-objs := spca505.o gspca_spca506-objs := spca506.o gspca_spca508-objs := spca508.o gspca_spca561-objs := spca561.o +gspca_sq905-objs := sq905.o gspca_stk014-objs := stk014.o gspca_sunplus-objs := sunplus.o gspca_t613-objs := t613.o diff --git a/drivers/media/video/gspca/sq905.c b/drivers/media/video/gspca/sq905.c new file mode 100644 index 00000000000..dafaed69e9d --- /dev/null +++ b/drivers/media/video/gspca/sq905.c @@ -0,0 +1,438 @@ +/* + * SQ905 subdriver + * + * Copyright (C) 2008, 2009 Adam Baker and Theodore Kilgore + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * History and Acknowledgments + * + * The original Linux driver for SQ905 based cameras was written by + * Marcell Lengyel and furter developed by many other contributers + * and is available from http://sourceforge.net/projects/sqcam/ + * + * This driver takes advantage of the reverse engineering work done for + * that driver and for libgphoto2 but shares no code with them. + * + * This driver has used as a base the finepix driver and other gspca + * based drivers and may still contain code fragments taken from those + * drivers. + */ + +#define MODULE_NAME "sq905" + +#include +#include "gspca.h" + +MODULE_AUTHOR("Adam Baker , " + "Theodore Kilgore "); +MODULE_DESCRIPTION("GSPCA/SQ905 USB Camera Driver"); +MODULE_LICENSE("GPL"); + +/* Default timeouts, in ms */ +#define SQ905_CMD_TIMEOUT 500 +#define SQ905_DATA_TIMEOUT 1000 + +/* Maximum transfer size to use. */ +#define SQ905_MAX_TRANSFER 0x8000 +#define FRAME_HEADER_LEN 64 + +/* The known modes, or registers. These go in the "value" slot. */ + +/* 00 is "none" obviously */ + +#define SQ905_BULK_READ 0x03 /* precedes any bulk read */ +#define SQ905_COMMAND 0x06 /* precedes the command codes below */ +#define SQ905_PING 0x07 /* when reading an "idling" command */ +#define SQ905_READ_DONE 0xc0 /* ack bulk read completed */ + +/* Some command codes. These go in the "index" slot. */ + +#define SQ905_ID 0xf0 /* asks for model string */ +#define SQ905_CONFIG 0x20 /* gets photo alloc. table, not used here */ +#define SQ905_DATA 0x30 /* accesses photo data, not used here */ +#define SQ905_CLEAR 0xa0 /* clear everything */ +#define SQ905_CAPTURE_LOW 0x60 /* Starts capture at 160x120 */ +#define SQ905_CAPTURE_MED 0x61 /* Starts capture at 320x240 */ +/* note that the capture command also controls the output dimensions */ +/* 0x60 -> 160x120, 0x61 -> 320x240 0x62 -> 640x480 depends on camera */ +/* 0x62 is not correct, at least for some cams. Should be 0x63 ? */ + +/* Structure to hold all of our device specific stuff */ +struct sd { + struct gspca_dev gspca_dev; /* !! must be the first item */ + + u8 cam_type; + + /* + * Driver stuff + */ + struct work_struct work_struct; + struct workqueue_struct *work_thread; +}; + +/* The driver only supports 320x240 so far. */ +static struct v4l2_pix_format sq905_mode[1] = { + { 320, 240, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 0} +}; + +struct cam_type { + u32 ident_word; + char *name; + struct v4l2_pix_format *min_mode; + u8 num_modes; + u8 sensor_flags; +}; + +#define SQ905_FLIP_HORIZ (1 << 0) +#define SQ905_FLIP_VERT (1 << 1) + +/* Last entry is default if nothing else matches */ +static struct cam_type cam_types[] = { + { 0x19010509, "PocketCam", &sq905_mode[0], 1, SQ905_FLIP_HORIZ }, + { 0x32010509, "Magpix", &sq905_mode[0], 1, SQ905_FLIP_HORIZ }, + { 0, "Default", &sq905_mode[0], 1, SQ905_FLIP_HORIZ | SQ905_FLIP_VERT } +}; + +/* + * Send a command to the camera. + */ +static int sq905_command(struct gspca_dev *gspca_dev, u16 index) +{ + int ret; + + gspca_dev->usb_buf[0] = '\0'; + ret = usb_control_msg(gspca_dev->dev, + usb_sndctrlpipe(gspca_dev->dev, 0), + USB_REQ_SYNCH_FRAME, /* request */ + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + SQ905_COMMAND, index, gspca_dev->usb_buf, 1, + SQ905_CMD_TIMEOUT); + if (ret < 0) { + PDEBUG(D_ERR, "%s: usb_control_msg failed (%d)", + __func__, ret); + return ret; + } + + ret = usb_control_msg(gspca_dev->dev, + usb_sndctrlpipe(gspca_dev->dev, 0), + USB_REQ_SYNCH_FRAME, /* request */ + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + SQ905_PING, 0, gspca_dev->usb_buf, 1, + SQ905_CMD_TIMEOUT); + if (ret < 0) { + PDEBUG(D_ERR, "%s: usb_control_msg failed 2 (%d)", + __func__, ret); + return ret; + } + + return 0; +} + +/* + * Acknowledge the end of a frame - see warning on sq905_command. + */ +static int sq905_ack_frame(struct gspca_dev *gspca_dev) +{ + int ret; + + gspca_dev->usb_buf[0] = '\0'; + ret = usb_control_msg(gspca_dev->dev, + usb_sndctrlpipe(gspca_dev->dev, 0), + USB_REQ_SYNCH_FRAME, /* request */ + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + SQ905_READ_DONE, 0, gspca_dev->usb_buf, 1, + SQ905_CMD_TIMEOUT); + if (ret < 0) { + PDEBUG(D_ERR, "%s: usb_control_msg failed (%d)", __func__, ret); + return ret; + } + + return 0; +} + +/* + * request and read a block of data - see warning on sq905_command. + */ +static int +sq905_read_data(struct gspca_dev *gspca_dev, u8 *data, int size) +{ + int ret; + int act_len; + + gspca_dev->usb_buf[0] = '\0'; + ret = usb_control_msg(gspca_dev->dev, + usb_sndctrlpipe(gspca_dev->dev, 0), + USB_REQ_SYNCH_FRAME, /* request */ + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + SQ905_BULK_READ, size, gspca_dev->usb_buf, + 1, SQ905_CMD_TIMEOUT); + if (ret < 0) { + PDEBUG(D_ERR, "%s: usb_control_msg failed (%d)", __func__, ret); + return ret; + } + ret = usb_bulk_msg(gspca_dev->dev, + usb_rcvbulkpipe(gspca_dev->dev, 0x81), + data, size, &act_len, SQ905_DATA_TIMEOUT); + + /* successful, it returns 0, otherwise negative */ + if (ret < 0 || act_len != size) { + PDEBUG(D_ERR, "bulk read fail (%d) len %d/%d", + ret, act_len, size); + return -EIO; + } + return 0; +} + +/* This function is called as a workqueue function and runs whenever the camera + * is streaming data. Because it is a workqueue function it is allowed to sleep + * so we can use synchronous USB calls. To avoid possible collisions with other + * threads attempting to use the camera's USB interface we take the gspca + * usb_lock when performing USB operations. In practice the only thing we need + * to protect against is the usb_set_interface call that gspca makes during + * stream_off as the camera doesn't provide any controls that the user could try + * to change. + */ +static void sq905_dostream(struct work_struct *work) +{ + struct sd *dev = container_of(work, struct sd, work_struct); + struct gspca_dev *gspca_dev = &dev->gspca_dev; + struct gspca_frame *frame; + int bytes_left; /* bytes remaining in current frame. */ + int data_len; /* size to use for the next read. */ + int header_read; /* true if we have already read the frame header. */ + int discarding; /* true if we failed to get space for frame. */ + int packet_type; + int ret; + u8 *data; + u8 *buffer; + + buffer = kmalloc(SQ905_MAX_TRANSFER, GFP_KERNEL | GFP_DMA); + mutex_lock(&gspca_dev->usb_lock); + if (!buffer) { + PDEBUG(D_ERR, "Couldn't allocate USB buffer"); + goto quit_stream; + } + + while (gspca_dev->present && gspca_dev->streaming) { + /* Need a short delay to ensure streaming flag was set by + * gspca and to make sure gspca can grab the mutex. */ + mutex_unlock(&gspca_dev->usb_lock); + msleep(1); + + /* request some data and then read it until we have + * a complete frame. */ + bytes_left = sq905_mode[0].sizeimage + FRAME_HEADER_LEN; + header_read = 0; + discarding = 0; + + while (bytes_left > 0) { + data_len = bytes_left > SQ905_MAX_TRANSFER ? + SQ905_MAX_TRANSFER : bytes_left; + mutex_lock(&gspca_dev->usb_lock); + if (!gspca_dev->present) + goto quit_stream; + ret = sq905_read_data(gspca_dev, buffer, data_len); + if (ret < 0) + goto quit_stream; + mutex_unlock(&gspca_dev->usb_lock); + PDEBUG(D_STREAM, + "Got %d bytes out of %d for frame", + data_len, bytes_left); + bytes_left -= data_len; + data = buffer; + if (!header_read) { + packet_type = FIRST_PACKET; + /* The first 64 bytes of each frame are + * a header full of FF 00 bytes */ + data += FRAME_HEADER_LEN; + data_len -= FRAME_HEADER_LEN; + header_read = 1; + } else if (bytes_left == 0) { + packet_type = LAST_PACKET; + } else { + packet_type = INTER_PACKET; + } + frame = gspca_get_i_frame(gspca_dev); + if (frame && !discarding) + gspca_frame_add(gspca_dev, packet_type, + frame, data, data_len); + else + discarding = 1; + } + /* acknowledge the frame */ + mutex_lock(&gspca_dev->usb_lock); + if (!gspca_dev->present) + goto quit_stream; + ret = sq905_ack_frame(gspca_dev); + if (ret < 0) + goto quit_stream; + } +quit_stream: + /* the usb_lock is already acquired */ + if (gspca_dev->present) + sq905_command(gspca_dev, SQ905_CLEAR); + mutex_unlock(&gspca_dev->usb_lock); + kfree(buffer); +} + +/* This function is called at probe time just before sd_init */ +static int sd_config(struct gspca_dev *gspca_dev, + const struct usb_device_id *id) +{ + struct cam *cam = &gspca_dev->cam; + struct sd *dev = (struct sd *) gspca_dev; + + cam->cam_mode = sq905_mode; + cam->nmodes = 1; + /* We don't use the buffer gspca allocates so make it small. */ + cam->bulk_size = 64; + + INIT_WORK(&dev->work_struct, sq905_dostream); + + return 0; +} + +/* called on streamoff with alt==0 and on disconnect */ +/* the usb_lock is held at entry - restore on exit */ +static void sd_stop0(struct gspca_dev *gspca_dev) +{ + struct sd *dev = (struct sd *) gspca_dev; + + /* wait for the work queue to terminate */ + mutex_unlock(&gspca_dev->usb_lock); + /* This waits for sq905_dostream to finish */ + destroy_workqueue(dev->work_thread); + dev->work_thread = NULL; + mutex_lock(&gspca_dev->usb_lock); +} + +/* this function is called at probe and resume time */ +static int sd_init(struct gspca_dev *gspca_dev) +{ + struct sd *dev = (struct sd *) gspca_dev; + u32 ident; + int ret; + + /* connect to the camera and read + * the model ID and process that and put it away. + */ + ret = sq905_command(gspca_dev, SQ905_CLEAR); + if (ret < 0) + return ret; + ret = sq905_command(gspca_dev, SQ905_ID); + if (ret < 0) + return ret; + ret = sq905_read_data(gspca_dev, gspca_dev->usb_buf, 4); + if (ret < 0) + return ret; + /* usb_buf is allocated with kmalloc so is aligned. */ + ident = le32_to_cpup((u32 *)gspca_dev->usb_buf); + ret = sq905_command(gspca_dev, SQ905_CLEAR); + if (ret < 0) + return ret; + dev->cam_type = 0; + while (dev->cam_type < ARRAY_SIZE(cam_types) - 1 && + ident != cam_types[dev->cam_type].ident_word) + dev->cam_type++; + PDEBUG(D_CONF, "SQ905 camera %s, ID %08x detected", + cam_types[dev->cam_type].name, ident); + return 0; +} + +/* Set up for getting frames. */ +static int sd_start(struct gspca_dev *gspca_dev) +{ + struct sd *dev = (struct sd *) gspca_dev; + int ret; + + /* "Open the shutter" and set size, to start capture */ + ret = sq905_command(&dev->gspca_dev, SQ905_CAPTURE_MED); + if (ret < 0) { + PDEBUG(D_ERR, "Start streaming command failed"); + return ret; + } + + /* Start the workqueue function to do the streaming */ + dev->work_thread = create_singlethread_workqueue(MODULE_NAME); + queue_work(dev->work_thread, &dev->work_struct); + + return 0; +} + +/* Table of supported USB devices */ +static const __devinitdata struct usb_device_id device_table[] = { + {USB_DEVICE(0x2770, 0x9120)}, + {} +}; + +MODULE_DEVICE_TABLE(usb, device_table); + +/* sub-driver description */ +static const struct sd_desc sd_desc = { + .name = MODULE_NAME, + .config = sd_config, + .init = sd_init, + .start = sd_start, + .stop0 = sd_stop0, +}; + +/* -- device connect -- */ +static int sd_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return gspca_dev_probe(intf, id, + &sd_desc, + sizeof(struct sd), + THIS_MODULE); +} + +static struct usb_driver sd_driver = { + .name = MODULE_NAME, + .id_table = device_table, + .probe = sd_probe, + .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif +}; + +/* -- module insert / remove -- */ +static int __init sd_mod_init(void) +{ + int ret; + + ret = usb_register(&sd_driver); + if (ret < 0) + return ret; + PDEBUG(D_PROBE, "registered"); + return 0; +} + +static void __exit sd_mod_exit(void) +{ + usb_deregister(&sd_driver); + PDEBUG(D_PROBE, "deregistered"); +} + +module_init(sd_mod_init); +module_exit(sd_mod_exit); -- cgit v1.2.3-70-g09d2