From da92c29340172fddb6ea838cd964614195031071 Mon Sep 17 00:00:00 2001 From: Matti Kurkela Date: Tue, 5 Feb 2013 07:08:42 -0300 Subject: [media] ttusb2: Kconfig patch to auto-select frontends for TechnoTrend CT-3650 The ttusb2 module is already updated to recognize the TechnoTrend CT-3650 CI DVB C/T USB2.0 receiver in addition to the Pinnacle 400e. But if MEDIA_SUBDRV_AUTOSELECT is used, the required tuner and demodulator modules are not automatically selected. Here's a patch to fix that and add a note of the CT-3650 to the online help of the ttusb2 module. This patch applies cleanly to 3.7.6 and other 3.7.x kernels. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/Kconfig | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/media') diff --git a/drivers/media/usb/dvb-usb/Kconfig b/drivers/media/usb/dvb-usb/Kconfig index c423eb80c3a..c5d95662e2e 100644 --- a/drivers/media/usb/dvb-usb/Kconfig +++ b/drivers/media/usb/dvb-usb/Kconfig @@ -202,8 +202,12 @@ config DVB_USB_TTUSB2 select DVB_TDA10086 if MEDIA_SUBDRV_AUTOSELECT select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT select DVB_TDA826X if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10048 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA827X if MEDIA_SUBDRV_AUTOSELECT help - Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver. The + Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver and + the TechnoTrend CT-3650 CI DVB-C/T USB2.0 receiver. The firmware protocol used by this module is similar to the one used by the old ttusb-driver - that's why the module is called dvb-usb-ttusb2. -- cgit v1.2.3-70-g09d2