From 7ba2db5f38955907e46a65c9334d287cd3da32c2 Mon Sep 17 00:00:00 2001 From: Michael Reed Date: Thu, 13 Mar 2008 14:53:56 -0500 Subject: [SCSI] fusion mpt: fix target missing after resetting external raid Following a hard reset of a SAS raid, one of the raid targets is occasionally missing. I tracked this down to a pretty obscure little bug. The LSI fusion drivers for SAS and Fibre Channel both use their respective transport layers. Those transport layers increment the target number assigned to new targets. The routine __scsi_scan_target uses the "this_id" element of the Scsi_Host structure to avoid scanning the scsi host adapter. Both fusion drivers set "this_id" from a value returned in a firmware PortFacts response. For my particular test case (SAS) the firmware id assigned to the initiator was 173. After enough raid resets to cause the raid targets to go and come a sufficient number of times, the id assigned by the transport to a raid target would match the id assigned by the host adapter to the "this_id" field, resulting in that target not being scanned. Fix by not assigning this_id and not checking it in slave_configure. Signed-off-by: Michael Reed Acked-by: "Moore, Eric" Signed-off-by: James Bottomley --- drivers/message/fusion/mptfc.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers/message/fusion/mptfc.c') diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c index 3cdd4e96211..1e24ab4ac38 100644 --- a/drivers/message/fusion/mptfc.c +++ b/drivers/message/fusion/mptfc.c @@ -1238,8 +1238,6 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id) sh->max_id = ioc->pfacts->MaxDevices; sh->max_lun = max_lun; - sh->this_id = ioc->pfacts[0].PortSCSIID; - /* Required entry. */ sh->unique_id = ioc->id; -- cgit v1.2.3-70-g09d2