From 4fe5668b73d7ad041101656c98f3a58d86f68840 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 3 May 2011 18:03:43 +0300 Subject: MFD: twl4030-codec: Rename internals from codec to audio In preparation of renaming the driver from twl4030-codec to twl4030-audio, first do some clean ups in the driver, which does not cause any problems outside. Signed-off-by: Peter Ujfalusi Acked-by: Samuel Ortiz --- drivers/mfd/twl4030-codec.c | 135 ++++++++++++++++++++++---------------------- 1 file changed, 68 insertions(+), 67 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/twl4030-codec.c b/drivers/mfd/twl4030-codec.c index 2bf4136464c..e1782b3f66a 100644 --- a/drivers/mfd/twl4030-codec.c +++ b/drivers/mfd/twl4030-codec.c @@ -1,5 +1,6 @@ /* - * MFD driver for twl4030 codec submodule + * MFD driver for twl4030 audio submodule, which contains an audio codec, and + * the vibra control. * * Author: Peter Ujfalusi * @@ -31,53 +32,53 @@ #include #include -#define TWL4030_CODEC_CELLS 2 +#define TWL4030_AUDIO_CELLS 2 -static struct platform_device *twl4030_codec_dev; +static struct platform_device *twl4030_audio_dev; -struct twl4030_codec_resource { +struct twl4030_audio_resource { int request_count; u8 reg; u8 mask; }; -struct twl4030_codec { +struct twl4030_audio { unsigned int audio_mclk; struct mutex mutex; - struct twl4030_codec_resource resource[TWL4030_CODEC_RES_MAX]; - struct mfd_cell cells[TWL4030_CODEC_CELLS]; + struct twl4030_audio_resource resource[TWL4030_CODEC_RES_MAX]; + struct mfd_cell cells[TWL4030_AUDIO_CELLS]; }; /* * Modify the resource, the function returns the content of the register * after the modification. */ -static int twl4030_codec_set_resource(enum twl4030_codec_res id, int enable) +static int twl4030_audio_set_resource(enum twl4030_codec_res id, int enable) { - struct twl4030_codec *codec = platform_get_drvdata(twl4030_codec_dev); + struct twl4030_audio *audio = platform_get_drvdata(twl4030_audio_dev); u8 val; twl_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE, &val, - codec->resource[id].reg); + audio->resource[id].reg); if (enable) - val |= codec->resource[id].mask; + val |= audio->resource[id].mask; else - val &= ~codec->resource[id].mask; + val &= ~audio->resource[id].mask; twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, - val, codec->resource[id].reg); + val, audio->resource[id].reg); return val; } -static inline int twl4030_codec_get_resource(enum twl4030_codec_res id) +static inline int twl4030_audio_get_resource(enum twl4030_codec_res id) { - struct twl4030_codec *codec = platform_get_drvdata(twl4030_codec_dev); + struct twl4030_audio *audio = platform_get_drvdata(twl4030_audio_dev); u8 val; twl_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE, &val, - codec->resource[id].reg); + audio->resource[id].reg); return val; } @@ -88,24 +89,24 @@ static inline int twl4030_codec_get_resource(enum twl4030_codec_res id) */ int twl4030_codec_enable_resource(enum twl4030_codec_res id) { - struct twl4030_codec *codec = platform_get_drvdata(twl4030_codec_dev); + struct twl4030_audio *audio = platform_get_drvdata(twl4030_audio_dev); int val; if (id >= TWL4030_CODEC_RES_MAX) { - dev_err(&twl4030_codec_dev->dev, + dev_err(&twl4030_audio_dev->dev, "Invalid resource ID (%u)\n", id); return -EINVAL; } - mutex_lock(&codec->mutex); - if (!codec->resource[id].request_count) + mutex_lock(&audio->mutex); + if (!audio->resource[id].request_count) /* Resource was disabled, enable it */ - val = twl4030_codec_set_resource(id, 1); + val = twl4030_audio_set_resource(id, 1); else - val = twl4030_codec_get_resource(id); + val = twl4030_audio_get_resource(id); - codec->resource[id].request_count++; - mutex_unlock(&codec->mutex); + audio->resource[id].request_count++; + mutex_unlock(&audio->mutex); return val; } @@ -117,31 +118,31 @@ EXPORT_SYMBOL_GPL(twl4030_codec_enable_resource); */ int twl4030_codec_disable_resource(unsigned id) { - struct twl4030_codec *codec = platform_get_drvdata(twl4030_codec_dev); + struct twl4030_audio *audio = platform_get_drvdata(twl4030_audio_dev); int val; if (id >= TWL4030_CODEC_RES_MAX) { - dev_err(&twl4030_codec_dev->dev, + dev_err(&twl4030_audio_dev->dev, "Invalid resource ID (%u)\n", id); return -EINVAL; } - mutex_lock(&codec->mutex); - if (!codec->resource[id].request_count) { - dev_err(&twl4030_codec_dev->dev, + mutex_lock(&audio->mutex); + if (!audio->resource[id].request_count) { + dev_err(&twl4030_audio_dev->dev, "Resource has been disabled already (%u)\n", id); - mutex_unlock(&codec->mutex); + mutex_unlock(&audio->mutex); return -EPERM; } - codec->resource[id].request_count--; + audio->resource[id].request_count--; - if (!codec->resource[id].request_count) + if (!audio->resource[id].request_count) /* Resource can be disabled now */ - val = twl4030_codec_set_resource(id, 0); + val = twl4030_audio_set_resource(id, 0); else - val = twl4030_codec_get_resource(id); + val = twl4030_audio_get_resource(id); - mutex_unlock(&codec->mutex); + mutex_unlock(&audio->mutex); return val; } @@ -149,15 +150,15 @@ EXPORT_SYMBOL_GPL(twl4030_codec_disable_resource); unsigned int twl4030_codec_get_mclk(void) { - struct twl4030_codec *codec = platform_get_drvdata(twl4030_codec_dev); + struct twl4030_audio *audio = platform_get_drvdata(twl4030_audio_dev); - return codec->audio_mclk; + return audio->audio_mclk; } EXPORT_SYMBOL_GPL(twl4030_codec_get_mclk); -static int __devinit twl4030_codec_probe(struct platform_device *pdev) +static int __devinit twl4030_audio_probe(struct platform_device *pdev) { - struct twl4030_codec *codec; + struct twl4030_audio *audio; struct twl4030_codec_data *pdata = pdev->dev.platform_data; struct mfd_cell *cell = NULL; int ret, childs = 0; @@ -187,33 +188,33 @@ static int __devinit twl4030_codec_probe(struct platform_device *pdev) twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, val, TWL4030_REG_APLL_CTL); - codec = kzalloc(sizeof(struct twl4030_codec), GFP_KERNEL); - if (!codec) + audio = kzalloc(sizeof(struct twl4030_audio), GFP_KERNEL); + if (!audio) return -ENOMEM; - platform_set_drvdata(pdev, codec); + platform_set_drvdata(pdev, audio); - twl4030_codec_dev = pdev; - mutex_init(&codec->mutex); - codec->audio_mclk = pdata->audio_mclk; + twl4030_audio_dev = pdev; + mutex_init(&audio->mutex); + audio->audio_mclk = pdata->audio_mclk; /* Codec power */ - codec->resource[TWL4030_CODEC_RES_POWER].reg = TWL4030_REG_CODEC_MODE; - codec->resource[TWL4030_CODEC_RES_POWER].mask = TWL4030_CODECPDZ; + audio->resource[TWL4030_CODEC_RES_POWER].reg = TWL4030_REG_CODEC_MODE; + audio->resource[TWL4030_CODEC_RES_POWER].mask = TWL4030_CODECPDZ; /* PLL */ - codec->resource[TWL4030_CODEC_RES_APLL].reg = TWL4030_REG_APLL_CTL; - codec->resource[TWL4030_CODEC_RES_APLL].mask = TWL4030_APLL_EN; + audio->resource[TWL4030_CODEC_RES_APLL].reg = TWL4030_REG_APLL_CTL; + audio->resource[TWL4030_CODEC_RES_APLL].mask = TWL4030_APLL_EN; if (pdata->audio) { - cell = &codec->cells[childs]; + cell = &audio->cells[childs]; cell->name = "twl4030-codec"; cell->platform_data = pdata->audio; cell->pdata_size = sizeof(*pdata->audio); childs++; } if (pdata->vibra) { - cell = &codec->cells[childs]; + cell = &audio->cells[childs]; cell->name = "twl4030-vibra"; cell->platform_data = pdata->vibra; cell->pdata_size = sizeof(*pdata->vibra); @@ -221,7 +222,7 @@ static int __devinit twl4030_codec_probe(struct platform_device *pdev) } if (childs) - ret = mfd_add_devices(&pdev->dev, pdev->id, codec->cells, + ret = mfd_add_devices(&pdev->dev, pdev->id, audio->cells, childs, NULL, 0); else { dev_err(&pdev->dev, "No platform data found for childs\n"); @@ -232,45 +233,45 @@ static int __devinit twl4030_codec_probe(struct platform_device *pdev) return 0; platform_set_drvdata(pdev, NULL); - kfree(codec); - twl4030_codec_dev = NULL; + kfree(audio); + twl4030_audio_dev = NULL; return ret; } -static int __devexit twl4030_codec_remove(struct platform_device *pdev) +static int __devexit twl4030_audio_remove(struct platform_device *pdev) { - struct twl4030_codec *codec = platform_get_drvdata(pdev); + struct twl4030_audio *audio = platform_get_drvdata(pdev); mfd_remove_devices(&pdev->dev); platform_set_drvdata(pdev, NULL); - kfree(codec); - twl4030_codec_dev = NULL; + kfree(audio); + twl4030_audio_dev = NULL; return 0; } MODULE_ALIAS("platform:twl4030-audio"); -static struct platform_driver twl4030_codec_driver = { - .probe = twl4030_codec_probe, - .remove = __devexit_p(twl4030_codec_remove), +static struct platform_driver twl4030_audio_driver = { + .probe = twl4030_audio_probe, + .remove = __devexit_p(twl4030_audio_remove), .driver = { .owner = THIS_MODULE, .name = "twl4030-audio", }, }; -static int __devinit twl4030_codec_init(void) +static int __devinit twl4030_audio_init(void) { - return platform_driver_register(&twl4030_codec_driver); + return platform_driver_register(&twl4030_audio_driver); } -module_init(twl4030_codec_init); +module_init(twl4030_audio_init); -static void __devexit twl4030_codec_exit(void) +static void __devexit twl4030_audio_exit(void) { - platform_driver_unregister(&twl4030_codec_driver); + platform_driver_unregister(&twl4030_audio_driver); } -module_exit(twl4030_codec_exit); +module_exit(twl4030_audio_exit); MODULE_AUTHOR("Peter Ujfalusi "); MODULE_LICENSE("GPL"); -- cgit v1.2.3-70-g09d2 From 57fe7251f5bfc4332f24479376de48a1e8ca6211 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 31 May 2011 12:02:49 +0300 Subject: MFD: twl4030-codec -> twl4030-audio: Rename the driver Rename the driver, and header file from twl4030-codec to twl4030-audio. To avoid breakage change depending drivers at the same time. Signed-off-by: Peter Ujfalusi CC: Misael Lopez Cruz Acked-by: Samuel Ortiz --- drivers/input/misc/Kconfig | 2 +- drivers/input/misc/twl4030-vibra.c | 10 +- drivers/mfd/Kconfig | 2 +- drivers/mfd/Makefile | 2 +- drivers/mfd/twl4030-audio.c | 277 ++++++++++++++++++++++++++++++++++++ drivers/mfd/twl4030-codec.c | 278 ------------------------------------- include/linux/mfd/twl4030-audio.h | 272 ++++++++++++++++++++++++++++++++++++ include/linux/mfd/twl4030-codec.h | 272 ------------------------------------ sound/soc/codecs/Kconfig | 2 +- sound/soc/codecs/twl4030.c | 16 +-- sound/soc/omap/sdp3430.c | 2 +- sound/soc/omap/zoom2.c | 2 +- 12 files changed, 568 insertions(+), 569 deletions(-) create mode 100644 drivers/mfd/twl4030-audio.c delete mode 100644 drivers/mfd/twl4030-codec.c create mode 100644 include/linux/mfd/twl4030-audio.h delete mode 100644 include/linux/mfd/twl4030-codec.h (limited to 'drivers/mfd') diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 45dc6aa62ba..077309a29a2 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -267,7 +267,7 @@ config INPUT_TWL4030_PWRBUTTON config INPUT_TWL4030_VIBRA tristate "Support for TWL4030 Vibrator" depends on TWL4030_CORE - select TWL4030_CODEC + select MFD_TWL4030_AUDIO select INPUT_FF_MEMLESS help This option enables support for TWL4030 Vibrator Driver. diff --git a/drivers/input/misc/twl4030-vibra.c b/drivers/input/misc/twl4030-vibra.c index 014dd4ad0d4..7abca85b5a7 100644 --- a/drivers/input/misc/twl4030-vibra.c +++ b/drivers/input/misc/twl4030-vibra.c @@ -28,7 +28,7 @@ #include #include #include -#include +#include #include #include @@ -67,7 +67,7 @@ static void vibra_enable(struct vibra_info *info) { u8 reg; - twl4030_codec_enable_resource(TWL4030_CODEC_RES_POWER); + twl4030_audio_enable_resource(TWL4030_AUDIO_RES_POWER); /* turn H-Bridge on */ twl_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE, @@ -75,7 +75,7 @@ static void vibra_enable(struct vibra_info *info) twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, (reg | TWL4030_VIBRA_EN), TWL4030_REG_VIBRA_CTL); - twl4030_codec_enable_resource(TWL4030_CODEC_RES_APLL); + twl4030_audio_enable_resource(TWL4030_AUDIO_RES_APLL); info->enabled = true; } @@ -90,8 +90,8 @@ static void vibra_disable(struct vibra_info *info) twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, (reg & ~TWL4030_VIBRA_EN), TWL4030_REG_VIBRA_CTL); - twl4030_codec_disable_resource(TWL4030_CODEC_RES_APLL); - twl4030_codec_disable_resource(TWL4030_CODEC_RES_POWER); + twl4030_audio_disable_resource(TWL4030_AUDIO_RES_APLL); + twl4030_audio_disable_resource(TWL4030_AUDIO_RES_POWER); info->enabled = false; } diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 0f09c057e79..3a6f76aac00 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -218,7 +218,7 @@ config TWL4030_POWER and load scripts controlling which resources are switched off/on or reset when a sleep, wakeup or warm reset event occurs. -config TWL4030_CODEC +config MFD_TWL4030_AUDIO bool depends on TWL4030_CORE select MFD_CORE diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index efe3cc33ed9..4cf946537e3 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -40,7 +40,7 @@ obj-$(CONFIG_MENELAUS) += menelaus.o obj-$(CONFIG_TWL4030_CORE) += twl-core.o twl4030-irq.o twl6030-irq.o obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o obj-$(CONFIG_TWL4030_POWER) += twl4030-power.o -obj-$(CONFIG_TWL4030_CODEC) += twl4030-codec.o +obj-$(CONFIG_MFD_TWL4030_AUDIO) += twl4030-audio.o obj-$(CONFIG_TWL6030_PWM) += twl6030-pwm.o obj-$(CONFIG_MFD_MC13XXX) += mc13xxx-core.o diff --git a/drivers/mfd/twl4030-audio.c b/drivers/mfd/twl4030-audio.c new file mode 100644 index 00000000000..5cdf8414679 --- /dev/null +++ b/drivers/mfd/twl4030-audio.c @@ -0,0 +1,277 @@ +/* + * MFD driver for twl4030 audio submodule, which contains an audio codec, and + * the vibra control. + * + * Author: Peter Ujfalusi + * + * Copyright: (C) 2009 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define TWL4030_AUDIO_CELLS 2 + +static struct platform_device *twl4030_audio_dev; + +struct twl4030_audio_resource { + int request_count; + u8 reg; + u8 mask; +}; + +struct twl4030_audio { + unsigned int audio_mclk; + struct mutex mutex; + struct twl4030_audio_resource resource[TWL4030_AUDIO_RES_MAX]; + struct mfd_cell cells[TWL4030_AUDIO_CELLS]; +}; + +/* + * Modify the resource, the function returns the content of the register + * after the modification. + */ +static int twl4030_audio_set_resource(enum twl4030_audio_res id, int enable) +{ + struct twl4030_audio *audio = platform_get_drvdata(twl4030_audio_dev); + u8 val; + + twl_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE, &val, + audio->resource[id].reg); + + if (enable) + val |= audio->resource[id].mask; + else + val &= ~audio->resource[id].mask; + + twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, + val, audio->resource[id].reg); + + return val; +} + +static inline int twl4030_audio_get_resource(enum twl4030_audio_res id) +{ + struct twl4030_audio *audio = platform_get_drvdata(twl4030_audio_dev); + u8 val; + + twl_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE, &val, + audio->resource[id].reg); + + return val; +} + +/* + * Enable the resource. + * The function returns with error or the content of the register + */ +int twl4030_audio_enable_resource(enum twl4030_audio_res id) +{ + struct twl4030_audio *audio = platform_get_drvdata(twl4030_audio_dev); + int val; + + if (id >= TWL4030_AUDIO_RES_MAX) { + dev_err(&twl4030_audio_dev->dev, + "Invalid resource ID (%u)\n", id); + return -EINVAL; + } + + mutex_lock(&audio->mutex); + if (!audio->resource[id].request_count) + /* Resource was disabled, enable it */ + val = twl4030_audio_set_resource(id, 1); + else + val = twl4030_audio_get_resource(id); + + audio->resource[id].request_count++; + mutex_unlock(&audio->mutex); + + return val; +} +EXPORT_SYMBOL_GPL(twl4030_audio_enable_resource); + +/* + * Disable the resource. + * The function returns with error or the content of the register + */ +int twl4030_audio_disable_resource(unsigned id) +{ + struct twl4030_audio *audio = platform_get_drvdata(twl4030_audio_dev); + int val; + + if (id >= TWL4030_AUDIO_RES_MAX) { + dev_err(&twl4030_audio_dev->dev, + "Invalid resource ID (%u)\n", id); + return -EINVAL; + } + + mutex_lock(&audio->mutex); + if (!audio->resource[id].request_count) { + dev_err(&twl4030_audio_dev->dev, + "Resource has been disabled already (%u)\n", id); + mutex_unlock(&audio->mutex); + return -EPERM; + } + audio->resource[id].request_count--; + + if (!audio->resource[id].request_count) + /* Resource can be disabled now */ + val = twl4030_audio_set_resource(id, 0); + else + val = twl4030_audio_get_resource(id); + + mutex_unlock(&audio->mutex); + + return val; +} +EXPORT_SYMBOL_GPL(twl4030_audio_disable_resource); + +unsigned int twl4030_audio_get_mclk(void) +{ + struct twl4030_audio *audio = platform_get_drvdata(twl4030_audio_dev); + + return audio->audio_mclk; +} +EXPORT_SYMBOL_GPL(twl4030_audio_get_mclk); + +static int __devinit twl4030_audio_probe(struct platform_device *pdev) +{ + struct twl4030_audio *audio; + struct twl4030_codec_data *pdata = pdev->dev.platform_data; + struct mfd_cell *cell = NULL; + int ret, childs = 0; + u8 val; + + if (!pdata) { + dev_err(&pdev->dev, "Platform data is missing\n"); + return -EINVAL; + } + + /* Configure APLL_INFREQ and disable APLL if enabled */ + val = 0; + switch (pdata->audio_mclk) { + case 19200000: + val |= TWL4030_APLL_INFREQ_19200KHZ; + break; + case 26000000: + val |= TWL4030_APLL_INFREQ_26000KHZ; + break; + case 38400000: + val |= TWL4030_APLL_INFREQ_38400KHZ; + break; + default: + dev_err(&pdev->dev, "Invalid audio_mclk\n"); + return -EINVAL; + } + twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, + val, TWL4030_REG_APLL_CTL); + + audio = kzalloc(sizeof(struct twl4030_audio), GFP_KERNEL); + if (!audio) + return -ENOMEM; + + platform_set_drvdata(pdev, audio); + + twl4030_audio_dev = pdev; + mutex_init(&audio->mutex); + audio->audio_mclk = pdata->audio_mclk; + + /* Codec power */ + audio->resource[TWL4030_AUDIO_RES_POWER].reg = TWL4030_REG_CODEC_MODE; + audio->resource[TWL4030_AUDIO_RES_POWER].mask = TWL4030_CODECPDZ; + + /* PLL */ + audio->resource[TWL4030_AUDIO_RES_APLL].reg = TWL4030_REG_APLL_CTL; + audio->resource[TWL4030_AUDIO_RES_APLL].mask = TWL4030_APLL_EN; + + if (pdata->audio) { + cell = &audio->cells[childs]; + cell->name = "twl4030-codec"; + cell->platform_data = pdata->audio; + cell->pdata_size = sizeof(*pdata->audio); + childs++; + } + if (pdata->vibra) { + cell = &audio->cells[childs]; + cell->name = "twl4030-vibra"; + cell->platform_data = pdata->vibra; + cell->pdata_size = sizeof(*pdata->vibra); + childs++; + } + + if (childs) + ret = mfd_add_devices(&pdev->dev, pdev->id, audio->cells, + childs, NULL, 0); + else { + dev_err(&pdev->dev, "No platform data found for childs\n"); + ret = -ENODEV; + } + + if (!ret) + return 0; + + platform_set_drvdata(pdev, NULL); + kfree(audio); + twl4030_audio_dev = NULL; + return ret; +} + +static int __devexit twl4030_audio_remove(struct platform_device *pdev) +{ + struct twl4030_audio *audio = platform_get_drvdata(pdev); + + mfd_remove_devices(&pdev->dev); + platform_set_drvdata(pdev, NULL); + kfree(audio); + twl4030_audio_dev = NULL; + + return 0; +} + +MODULE_ALIAS("platform:twl4030-audio"); + +static struct platform_driver twl4030_audio_driver = { + .probe = twl4030_audio_probe, + .remove = __devexit_p(twl4030_audio_remove), + .driver = { + .owner = THIS_MODULE, + .name = "twl4030-audio", + }, +}; + +static int __devinit twl4030_audio_init(void) +{ + return platform_driver_register(&twl4030_audio_driver); +} +module_init(twl4030_audio_init); + +static void __devexit twl4030_audio_exit(void) +{ + platform_driver_unregister(&twl4030_audio_driver); +} +module_exit(twl4030_audio_exit); + +MODULE_AUTHOR("Peter Ujfalusi "); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/twl4030-codec.c b/drivers/mfd/twl4030-codec.c deleted file mode 100644 index e1782b3f66a..00000000000 --- a/drivers/mfd/twl4030-codec.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - * MFD driver for twl4030 audio submodule, which contains an audio codec, and - * the vibra control. - * - * Author: Peter Ujfalusi - * - * Copyright: (C) 2009 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define TWL4030_AUDIO_CELLS 2 - -static struct platform_device *twl4030_audio_dev; - -struct twl4030_audio_resource { - int request_count; - u8 reg; - u8 mask; -}; - -struct twl4030_audio { - unsigned int audio_mclk; - struct mutex mutex; - struct twl4030_audio_resource resource[TWL4030_CODEC_RES_MAX]; - struct mfd_cell cells[TWL4030_AUDIO_CELLS]; -}; - -/* - * Modify the resource, the function returns the content of the register - * after the modification. - */ -static int twl4030_audio_set_resource(enum twl4030_codec_res id, int enable) -{ - struct twl4030_audio *audio = platform_get_drvdata(twl4030_audio_dev); - u8 val; - - twl_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE, &val, - audio->resource[id].reg); - - if (enable) - val |= audio->resource[id].mask; - else - val &= ~audio->resource[id].mask; - - twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, - val, audio->resource[id].reg); - - return val; -} - -static inline int twl4030_audio_get_resource(enum twl4030_codec_res id) -{ - struct twl4030_audio *audio = platform_get_drvdata(twl4030_audio_dev); - u8 val; - - twl_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE, &val, - audio->resource[id].reg); - - return val; -} - -/* - * Enable the resource. - * The function returns with error or the content of the register - */ -int twl4030_codec_enable_resource(enum twl4030_codec_res id) -{ - struct twl4030_audio *audio = platform_get_drvdata(twl4030_audio_dev); - int val; - - if (id >= TWL4030_CODEC_RES_MAX) { - dev_err(&twl4030_audio_dev->dev, - "Invalid resource ID (%u)\n", id); - return -EINVAL; - } - - mutex_lock(&audio->mutex); - if (!audio->resource[id].request_count) - /* Resource was disabled, enable it */ - val = twl4030_audio_set_resource(id, 1); - else - val = twl4030_audio_get_resource(id); - - audio->resource[id].request_count++; - mutex_unlock(&audio->mutex); - - return val; -} -EXPORT_SYMBOL_GPL(twl4030_codec_enable_resource); - -/* - * Disable the resource. - * The function returns with error or the content of the register - */ -int twl4030_codec_disable_resource(unsigned id) -{ - struct twl4030_audio *audio = platform_get_drvdata(twl4030_audio_dev); - int val; - - if (id >= TWL4030_CODEC_RES_MAX) { - dev_err(&twl4030_audio_dev->dev, - "Invalid resource ID (%u)\n", id); - return -EINVAL; - } - - mutex_lock(&audio->mutex); - if (!audio->resource[id].request_count) { - dev_err(&twl4030_audio_dev->dev, - "Resource has been disabled already (%u)\n", id); - mutex_unlock(&audio->mutex); - return -EPERM; - } - audio->resource[id].request_count--; - - if (!audio->resource[id].request_count) - /* Resource can be disabled now */ - val = twl4030_audio_set_resource(id, 0); - else - val = twl4030_audio_get_resource(id); - - mutex_unlock(&audio->mutex); - - return val; -} -EXPORT_SYMBOL_GPL(twl4030_codec_disable_resource); - -unsigned int twl4030_codec_get_mclk(void) -{ - struct twl4030_audio *audio = platform_get_drvdata(twl4030_audio_dev); - - return audio->audio_mclk; -} -EXPORT_SYMBOL_GPL(twl4030_codec_get_mclk); - -static int __devinit twl4030_audio_probe(struct platform_device *pdev) -{ - struct twl4030_audio *audio; - struct twl4030_codec_data *pdata = pdev->dev.platform_data; - struct mfd_cell *cell = NULL; - int ret, childs = 0; - u8 val; - - if (!pdata) { - dev_err(&pdev->dev, "Platform data is missing\n"); - return -EINVAL; - } - - /* Configure APLL_INFREQ and disable APLL if enabled */ - val = 0; - switch (pdata->audio_mclk) { - case 19200000: - val |= TWL4030_APLL_INFREQ_19200KHZ; - break; - case 26000000: - val |= TWL4030_APLL_INFREQ_26000KHZ; - break; - case 38400000: - val |= TWL4030_APLL_INFREQ_38400KHZ; - break; - default: - dev_err(&pdev->dev, "Invalid audio_mclk\n"); - return -EINVAL; - } - twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, - val, TWL4030_REG_APLL_CTL); - - audio = kzalloc(sizeof(struct twl4030_audio), GFP_KERNEL); - if (!audio) - return -ENOMEM; - - platform_set_drvdata(pdev, audio); - - twl4030_audio_dev = pdev; - mutex_init(&audio->mutex); - audio->audio_mclk = pdata->audio_mclk; - - /* Codec power */ - audio->resource[TWL4030_CODEC_RES_POWER].reg = TWL4030_REG_CODEC_MODE; - audio->resource[TWL4030_CODEC_RES_POWER].mask = TWL4030_CODECPDZ; - - /* PLL */ - audio->resource[TWL4030_CODEC_RES_APLL].reg = TWL4030_REG_APLL_CTL; - audio->resource[TWL4030_CODEC_RES_APLL].mask = TWL4030_APLL_EN; - - if (pdata->audio) { - cell = &audio->cells[childs]; - cell->name = "twl4030-codec"; - cell->platform_data = pdata->audio; - cell->pdata_size = sizeof(*pdata->audio); - childs++; - } - if (pdata->vibra) { - cell = &audio->cells[childs]; - cell->name = "twl4030-vibra"; - cell->platform_data = pdata->vibra; - cell->pdata_size = sizeof(*pdata->vibra); - childs++; - } - - if (childs) - ret = mfd_add_devices(&pdev->dev, pdev->id, audio->cells, - childs, NULL, 0); - else { - dev_err(&pdev->dev, "No platform data found for childs\n"); - ret = -ENODEV; - } - - if (!ret) - return 0; - - platform_set_drvdata(pdev, NULL); - kfree(audio); - twl4030_audio_dev = NULL; - return ret; -} - -static int __devexit twl4030_audio_remove(struct platform_device *pdev) -{ - struct twl4030_audio *audio = platform_get_drvdata(pdev); - - mfd_remove_devices(&pdev->dev); - platform_set_drvdata(pdev, NULL); - kfree(audio); - twl4030_audio_dev = NULL; - - return 0; -} - -MODULE_ALIAS("platform:twl4030-audio"); - -static struct platform_driver twl4030_audio_driver = { - .probe = twl4030_audio_probe, - .remove = __devexit_p(twl4030_audio_remove), - .driver = { - .owner = THIS_MODULE, - .name = "twl4030-audio", - }, -}; - -static int __devinit twl4030_audio_init(void) -{ - return platform_driver_register(&twl4030_audio_driver); -} -module_init(twl4030_audio_init); - -static void __devexit twl4030_audio_exit(void) -{ - platform_driver_unregister(&twl4030_audio_driver); -} -module_exit(twl4030_audio_exit); - -MODULE_AUTHOR("Peter Ujfalusi "); -MODULE_LICENSE("GPL"); - diff --git a/include/linux/mfd/twl4030-audio.h b/include/linux/mfd/twl4030-audio.h new file mode 100644 index 00000000000..3d22b72df07 --- /dev/null +++ b/include/linux/mfd/twl4030-audio.h @@ -0,0 +1,272 @@ +/* + * MFD driver for twl4030 audio submodule + * + * Author: Peter Ujfalusi + * + * Copyright: (C) 2009 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __TWL4030_CODEC_H__ +#define __TWL4030_CODEC_H__ + +/* Codec registers */ +#define TWL4030_REG_CODEC_MODE 0x01 +#define TWL4030_REG_OPTION 0x02 +#define TWL4030_REG_UNKNOWN 0x03 +#define TWL4030_REG_MICBIAS_CTL 0x04 +#define TWL4030_REG_ANAMICL 0x05 +#define TWL4030_REG_ANAMICR 0x06 +#define TWL4030_REG_AVADC_CTL 0x07 +#define TWL4030_REG_ADCMICSEL 0x08 +#define TWL4030_REG_DIGMIXING 0x09 +#define TWL4030_REG_ATXL1PGA 0x0A +#define TWL4030_REG_ATXR1PGA 0x0B +#define TWL4030_REG_AVTXL2PGA 0x0C +#define TWL4030_REG_AVTXR2PGA 0x0D +#define TWL4030_REG_AUDIO_IF 0x0E +#define TWL4030_REG_VOICE_IF 0x0F +#define TWL4030_REG_ARXR1PGA 0x10 +#define TWL4030_REG_ARXL1PGA 0x11 +#define TWL4030_REG_ARXR2PGA 0x12 +#define TWL4030_REG_ARXL2PGA 0x13 +#define TWL4030_REG_VRXPGA 0x14 +#define TWL4030_REG_VSTPGA 0x15 +#define TWL4030_REG_VRX2ARXPGA 0x16 +#define TWL4030_REG_AVDAC_CTL 0x17 +#define TWL4030_REG_ARX2VTXPGA 0x18 +#define TWL4030_REG_ARXL1_APGA_CTL 0x19 +#define TWL4030_REG_ARXR1_APGA_CTL 0x1A +#define TWL4030_REG_ARXL2_APGA_CTL 0x1B +#define TWL4030_REG_ARXR2_APGA_CTL 0x1C +#define TWL4030_REG_ATX2ARXPGA 0x1D +#define TWL4030_REG_BT_IF 0x1E +#define TWL4030_REG_BTPGA 0x1F +#define TWL4030_REG_BTSTPGA 0x20 +#define TWL4030_REG_EAR_CTL 0x21 +#define TWL4030_REG_HS_SEL 0x22 +#define TWL4030_REG_HS_GAIN_SET 0x23 +#define TWL4030_REG_HS_POPN_SET 0x24 +#define TWL4030_REG_PREDL_CTL 0x25 +#define TWL4030_REG_PREDR_CTL 0x26 +#define TWL4030_REG_PRECKL_CTL 0x27 +#define TWL4030_REG_PRECKR_CTL 0x28 +#define TWL4030_REG_HFL_CTL 0x29 +#define TWL4030_REG_HFR_CTL 0x2A +#define TWL4030_REG_ALC_CTL 0x2B +#define TWL4030_REG_ALC_SET1 0x2C +#define TWL4030_REG_ALC_SET2 0x2D +#define TWL4030_REG_BOOST_CTL 0x2E +#define TWL4030_REG_SOFTVOL_CTL 0x2F +#define TWL4030_REG_DTMF_FREQSEL 0x30 +#define TWL4030_REG_DTMF_TONEXT1H 0x31 +#define TWL4030_REG_DTMF_TONEXT1L 0x32 +#define TWL4030_REG_DTMF_TONEXT2H 0x33 +#define TWL4030_REG_DTMF_TONEXT2L 0x34 +#define TWL4030_REG_DTMF_TONOFF 0x35 +#define TWL4030_REG_DTMF_WANONOFF 0x36 +#define TWL4030_REG_I2S_RX_SCRAMBLE_H 0x37 +#define TWL4030_REG_I2S_RX_SCRAMBLE_M 0x38 +#define TWL4030_REG_I2S_RX_SCRAMBLE_L 0x39 +#define TWL4030_REG_APLL_CTL 0x3A +#define TWL4030_REG_DTMF_CTL 0x3B +#define TWL4030_REG_DTMF_PGA_CTL2 0x3C +#define TWL4030_REG_DTMF_PGA_CTL1 0x3D +#define TWL4030_REG_MISC_SET_1 0x3E +#define TWL4030_REG_PCMBTMUX 0x3F +#define TWL4030_REG_RX_PATH_SEL 0x43 +#define TWL4030_REG_VDL_APGA_CTL 0x44 +#define TWL4030_REG_VIBRA_CTL 0x45 +#define TWL4030_REG_VIBRA_SET 0x46 +#define TWL4030_REG_VIBRA_PWM_SET 0x47 +#define TWL4030_REG_ANAMIC_GAIN 0x48 +#define TWL4030_REG_MISC_SET_2 0x49 + +/* Bitfield Definitions */ + +/* TWL4030_CODEC_MODE (0x01) Fields */ +#define TWL4030_APLL_RATE 0xF0 +#define TWL4030_APLL_RATE_8000 0x00 +#define TWL4030_APLL_RATE_11025 0x10 +#define TWL4030_APLL_RATE_12000 0x20 +#define TWL4030_APLL_RATE_16000 0x40 +#define TWL4030_APLL_RATE_22050 0x50 +#define TWL4030_APLL_RATE_24000 0x60 +#define TWL4030_APLL_RATE_32000 0x80 +#define TWL4030_APLL_RATE_44100 0x90 +#define TWL4030_APLL_RATE_48000 0xA0 +#define TWL4030_APLL_RATE_96000 0xE0 +#define TWL4030_SEL_16K 0x08 +#define TWL4030_CODECPDZ 0x02 +#define TWL4030_OPT_MODE 0x01 +#define TWL4030_OPTION_1 (1 << 0) +#define TWL4030_OPTION_2 (0 << 0) + +/* TWL4030_OPTION (0x02) Fields */ +#define TWL4030_ATXL1_EN (1 << 0) +#define TWL4030_ATXR1_EN (1 << 1) +#define TWL4030_ATXL2_VTXL_EN (1 << 2) +#define TWL4030_ATXR2_VTXR_EN (1 << 3) +#define TWL4030_ARXL1_VRX_EN (1 << 4) +#define TWL4030_ARXR1_EN (1 << 5) +#define TWL4030_ARXL2_EN (1 << 6) +#define TWL4030_ARXR2_EN (1 << 7) + +/* TWL4030_REG_MICBIAS_CTL (0x04) Fields */ +#define TWL4030_MICBIAS2_CTL 0x40 +#define TWL4030_MICBIAS1_CTL 0x20 +#define TWL4030_HSMICBIAS_EN 0x04 +#define TWL4030_MICBIAS2_EN 0x02 +#define TWL4030_MICBIAS1_EN 0x01 + +/* ANAMICL (0x05) Fields */ +#define TWL4030_CNCL_OFFSET_START 0x80 +#define TWL4030_OFFSET_CNCL_SEL 0x60 +#define TWL4030_OFFSET_CNCL_SEL_ARX1 0x00 +#define TWL4030_OFFSET_CNCL_SEL_ARX2 0x20 +#define TWL4030_OFFSET_CNCL_SEL_VRX 0x40 +#define TWL4030_OFFSET_CNCL_SEL_ALL 0x60 +#define TWL4030_MICAMPL_EN 0x10 +#define TWL4030_CKMIC_EN 0x08 +#define TWL4030_AUXL_EN 0x04 +#define TWL4030_HSMIC_EN 0x02 +#define TWL4030_MAINMIC_EN 0x01 + +/* ANAMICR (0x06) Fields */ +#define TWL4030_MICAMPR_EN 0x10 +#define TWL4030_AUXR_EN 0x04 +#define TWL4030_SUBMIC_EN 0x01 + +/* AVADC_CTL (0x07) Fields */ +#define TWL4030_ADCL_EN 0x08 +#define TWL4030_AVADC_CLK_PRIORITY 0x04 +#define TWL4030_ADCR_EN 0x02 + +/* TWL4030_REG_ADCMICSEL (0x08) Fields */ +#define TWL4030_DIGMIC1_EN 0x08 +#define TWL4030_TX2IN_SEL 0x04 +#define TWL4030_DIGMIC0_EN 0x02 +#define TWL4030_TX1IN_SEL 0x01 + +/* AUDIO_IF (0x0E) Fields */ +#define TWL4030_AIF_SLAVE_EN 0x80 +#define TWL4030_DATA_WIDTH 0x60 +#define TWL4030_DATA_WIDTH_16S_16W 0x00 +#define TWL4030_DATA_WIDTH_32S_16W 0x40 +#define TWL4030_DATA_WIDTH_32S_24W 0x60 +#define TWL4030_AIF_FORMAT 0x18 +#define TWL4030_AIF_FORMAT_CODEC 0x00 +#define TWL4030_AIF_FORMAT_LEFT 0x08 +#define TWL4030_AIF_FORMAT_RIGHT 0x10 +#define TWL4030_AIF_FORMAT_TDM 0x18 +#define TWL4030_AIF_TRI_EN 0x04 +#define TWL4030_CLK256FS_EN 0x02 +#define TWL4030_AIF_EN 0x01 + +/* VOICE_IF (0x0F) Fields */ +#define TWL4030_VIF_SLAVE_EN 0x80 +#define TWL4030_VIF_DIN_EN 0x40 +#define TWL4030_VIF_DOUT_EN 0x20 +#define TWL4030_VIF_SWAP 0x10 +#define TWL4030_VIF_FORMAT 0x08 +#define TWL4030_VIF_TRI_EN 0x04 +#define TWL4030_VIF_SUB_EN 0x02 +#define TWL4030_VIF_EN 0x01 + +/* EAR_CTL (0x21) */ +#define TWL4030_EAR_GAIN 0x30 + +/* HS_GAIN_SET (0x23) Fields */ +#define TWL4030_HSR_GAIN 0x0C +#define TWL4030_HSR_GAIN_PWR_DOWN 0x00 +#define TWL4030_HSR_GAIN_PLUS_6DB 0x04 +#define TWL4030_HSR_GAIN_0DB 0x08 +#define TWL4030_HSR_GAIN_MINUS_6DB 0x0C +#define TWL4030_HSL_GAIN 0x03 +#define TWL4030_HSL_GAIN_PWR_DOWN 0x00 +#define TWL4030_HSL_GAIN_PLUS_6DB 0x01 +#define TWL4030_HSL_GAIN_0DB 0x02 +#define TWL4030_HSL_GAIN_MINUS_6DB 0x03 + +/* HS_POPN_SET (0x24) Fields */ +#define TWL4030_VMID_EN 0x40 +#define TWL4030_EXTMUTE 0x20 +#define TWL4030_RAMP_DELAY 0x1C +#define TWL4030_RAMP_DELAY_20MS 0x00 +#define TWL4030_RAMP_DELAY_40MS 0x04 +#define TWL4030_RAMP_DELAY_81MS 0x08 +#define TWL4030_RAMP_DELAY_161MS 0x0C +#define TWL4030_RAMP_DELAY_323MS 0x10 +#define TWL4030_RAMP_DELAY_645MS 0x14 +#define TWL4030_RAMP_DELAY_1291MS 0x18 +#define TWL4030_RAMP_DELAY_2581MS 0x1C +#define TWL4030_RAMP_EN 0x02 + +/* PREDL_CTL (0x25) */ +#define TWL4030_PREDL_GAIN 0x30 + +/* PREDR_CTL (0x26) */ +#define TWL4030_PREDR_GAIN 0x30 + +/* PRECKL_CTL (0x27) */ +#define TWL4030_PRECKL_GAIN 0x30 + +/* PRECKR_CTL (0x28) */ +#define TWL4030_PRECKR_GAIN 0x30 + +/* HFL_CTL (0x29, 0x2A) Fields */ +#define TWL4030_HF_CTL_HB_EN 0x04 +#define TWL4030_HF_CTL_LOOP_EN 0x08 +#define TWL4030_HF_CTL_RAMP_EN 0x10 +#define TWL4030_HF_CTL_REF_EN 0x20 + +/* APLL_CTL (0x3A) Fields */ +#define TWL4030_APLL_EN 0x10 +#define TWL4030_APLL_INFREQ 0x0F +#define TWL4030_APLL_INFREQ_19200KHZ 0x05 +#define TWL4030_APLL_INFREQ_26000KHZ 0x06 +#define TWL4030_APLL_INFREQ_38400KHZ 0x0F + +/* REG_MISC_SET_1 (0x3E) Fields */ +#define TWL4030_CLK64_EN 0x80 +#define TWL4030_SCRAMBLE_EN 0x40 +#define TWL4030_FMLOOP_EN 0x20 +#define TWL4030_SMOOTH_ANAVOL_EN 0x02 +#define TWL4030_DIGMIC_LR_SWAP_EN 0x01 + +/* VIBRA_CTL (0x45) */ +#define TWL4030_VIBRA_EN 0x01 +#define TWL4030_VIBRA_DIR 0x02 +#define TWL4030_VIBRA_AUDIO_SEL_L1 (0x00 << 2) +#define TWL4030_VIBRA_AUDIO_SEL_R1 (0x01 << 2) +#define TWL4030_VIBRA_AUDIO_SEL_L2 (0x02 << 2) +#define TWL4030_VIBRA_AUDIO_SEL_R2 (0x03 << 2) +#define TWL4030_VIBRA_SEL 0x10 +#define TWL4030_VIBRA_DIR_SEL 0x20 + +/* TWL4030 codec resource IDs */ +enum twl4030_audio_res { + TWL4030_AUDIO_RES_POWER = 0, + TWL4030_AUDIO_RES_APLL, + TWL4030_AUDIO_RES_MAX, +}; + +int twl4030_audio_disable_resource(enum twl4030_audio_res id); +int twl4030_audio_enable_resource(enum twl4030_audio_res id); +unsigned int twl4030_audio_get_mclk(void); + +#endif /* End of __TWL4030_CODEC_H__ */ diff --git a/include/linux/mfd/twl4030-codec.h b/include/linux/mfd/twl4030-codec.h deleted file mode 100644 index 5cc16bbd1da..00000000000 --- a/include/linux/mfd/twl4030-codec.h +++ /dev/null @@ -1,272 +0,0 @@ -/* - * MFD driver for twl4030 codec submodule - * - * Author: Peter Ujfalusi - * - * Copyright: (C) 2009 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __TWL4030_CODEC_H__ -#define __TWL4030_CODEC_H__ - -/* Codec registers */ -#define TWL4030_REG_CODEC_MODE 0x01 -#define TWL4030_REG_OPTION 0x02 -#define TWL4030_REG_UNKNOWN 0x03 -#define TWL4030_REG_MICBIAS_CTL 0x04 -#define TWL4030_REG_ANAMICL 0x05 -#define TWL4030_REG_ANAMICR 0x06 -#define TWL4030_REG_AVADC_CTL 0x07 -#define TWL4030_REG_ADCMICSEL 0x08 -#define TWL4030_REG_DIGMIXING 0x09 -#define TWL4030_REG_ATXL1PGA 0x0A -#define TWL4030_REG_ATXR1PGA 0x0B -#define TWL4030_REG_AVTXL2PGA 0x0C -#define TWL4030_REG_AVTXR2PGA 0x0D -#define TWL4030_REG_AUDIO_IF 0x0E -#define TWL4030_REG_VOICE_IF 0x0F -#define TWL4030_REG_ARXR1PGA 0x10 -#define TWL4030_REG_ARXL1PGA 0x11 -#define TWL4030_REG_ARXR2PGA 0x12 -#define TWL4030_REG_ARXL2PGA 0x13 -#define TWL4030_REG_VRXPGA 0x14 -#define TWL4030_REG_VSTPGA 0x15 -#define TWL4030_REG_VRX2ARXPGA 0x16 -#define TWL4030_REG_AVDAC_CTL 0x17 -#define TWL4030_REG_ARX2VTXPGA 0x18 -#define TWL4030_REG_ARXL1_APGA_CTL 0x19 -#define TWL4030_REG_ARXR1_APGA_CTL 0x1A -#define TWL4030_REG_ARXL2_APGA_CTL 0x1B -#define TWL4030_REG_ARXR2_APGA_CTL 0x1C -#define TWL4030_REG_ATX2ARXPGA 0x1D -#define TWL4030_REG_BT_IF 0x1E -#define TWL4030_REG_BTPGA 0x1F -#define TWL4030_REG_BTSTPGA 0x20 -#define TWL4030_REG_EAR_CTL 0x21 -#define TWL4030_REG_HS_SEL 0x22 -#define TWL4030_REG_HS_GAIN_SET 0x23 -#define TWL4030_REG_HS_POPN_SET 0x24 -#define TWL4030_REG_PREDL_CTL 0x25 -#define TWL4030_REG_PREDR_CTL 0x26 -#define TWL4030_REG_PRECKL_CTL 0x27 -#define TWL4030_REG_PRECKR_CTL 0x28 -#define TWL4030_REG_HFL_CTL 0x29 -#define TWL4030_REG_HFR_CTL 0x2A -#define TWL4030_REG_ALC_CTL 0x2B -#define TWL4030_REG_ALC_SET1 0x2C -#define TWL4030_REG_ALC_SET2 0x2D -#define TWL4030_REG_BOOST_CTL 0x2E -#define TWL4030_REG_SOFTVOL_CTL 0x2F -#define TWL4030_REG_DTMF_FREQSEL 0x30 -#define TWL4030_REG_DTMF_TONEXT1H 0x31 -#define TWL4030_REG_DTMF_TONEXT1L 0x32 -#define TWL4030_REG_DTMF_TONEXT2H 0x33 -#define TWL4030_REG_DTMF_TONEXT2L 0x34 -#define TWL4030_REG_DTMF_TONOFF 0x35 -#define TWL4030_REG_DTMF_WANONOFF 0x36 -#define TWL4030_REG_I2S_RX_SCRAMBLE_H 0x37 -#define TWL4030_REG_I2S_RX_SCRAMBLE_M 0x38 -#define TWL4030_REG_I2S_RX_SCRAMBLE_L 0x39 -#define TWL4030_REG_APLL_CTL 0x3A -#define TWL4030_REG_DTMF_CTL 0x3B -#define TWL4030_REG_DTMF_PGA_CTL2 0x3C -#define TWL4030_REG_DTMF_PGA_CTL1 0x3D -#define TWL4030_REG_MISC_SET_1 0x3E -#define TWL4030_REG_PCMBTMUX 0x3F -#define TWL4030_REG_RX_PATH_SEL 0x43 -#define TWL4030_REG_VDL_APGA_CTL 0x44 -#define TWL4030_REG_VIBRA_CTL 0x45 -#define TWL4030_REG_VIBRA_SET 0x46 -#define TWL4030_REG_VIBRA_PWM_SET 0x47 -#define TWL4030_REG_ANAMIC_GAIN 0x48 -#define TWL4030_REG_MISC_SET_2 0x49 - -/* Bitfield Definitions */ - -/* TWL4030_CODEC_MODE (0x01) Fields */ -#define TWL4030_APLL_RATE 0xF0 -#define TWL4030_APLL_RATE_8000 0x00 -#define TWL4030_APLL_RATE_11025 0x10 -#define TWL4030_APLL_RATE_12000 0x20 -#define TWL4030_APLL_RATE_16000 0x40 -#define TWL4030_APLL_RATE_22050 0x50 -#define TWL4030_APLL_RATE_24000 0x60 -#define TWL4030_APLL_RATE_32000 0x80 -#define TWL4030_APLL_RATE_44100 0x90 -#define TWL4030_APLL_RATE_48000 0xA0 -#define TWL4030_APLL_RATE_96000 0xE0 -#define TWL4030_SEL_16K 0x08 -#define TWL4030_CODECPDZ 0x02 -#define TWL4030_OPT_MODE 0x01 -#define TWL4030_OPTION_1 (1 << 0) -#define TWL4030_OPTION_2 (0 << 0) - -/* TWL4030_OPTION (0x02) Fields */ -#define TWL4030_ATXL1_EN (1 << 0) -#define TWL4030_ATXR1_EN (1 << 1) -#define TWL4030_ATXL2_VTXL_EN (1 << 2) -#define TWL4030_ATXR2_VTXR_EN (1 << 3) -#define TWL4030_ARXL1_VRX_EN (1 << 4) -#define TWL4030_ARXR1_EN (1 << 5) -#define TWL4030_ARXL2_EN (1 << 6) -#define TWL4030_ARXR2_EN (1 << 7) - -/* TWL4030_REG_MICBIAS_CTL (0x04) Fields */ -#define TWL4030_MICBIAS2_CTL 0x40 -#define TWL4030_MICBIAS1_CTL 0x20 -#define TWL4030_HSMICBIAS_EN 0x04 -#define TWL4030_MICBIAS2_EN 0x02 -#define TWL4030_MICBIAS1_EN 0x01 - -/* ANAMICL (0x05) Fields */ -#define TWL4030_CNCL_OFFSET_START 0x80 -#define TWL4030_OFFSET_CNCL_SEL 0x60 -#define TWL4030_OFFSET_CNCL_SEL_ARX1 0x00 -#define TWL4030_OFFSET_CNCL_SEL_ARX2 0x20 -#define TWL4030_OFFSET_CNCL_SEL_VRX 0x40 -#define TWL4030_OFFSET_CNCL_SEL_ALL 0x60 -#define TWL4030_MICAMPL_EN 0x10 -#define TWL4030_CKMIC_EN 0x08 -#define TWL4030_AUXL_EN 0x04 -#define TWL4030_HSMIC_EN 0x02 -#define TWL4030_MAINMIC_EN 0x01 - -/* ANAMICR (0x06) Fields */ -#define TWL4030_MICAMPR_EN 0x10 -#define TWL4030_AUXR_EN 0x04 -#define TWL4030_SUBMIC_EN 0x01 - -/* AVADC_CTL (0x07) Fields */ -#define TWL4030_ADCL_EN 0x08 -#define TWL4030_AVADC_CLK_PRIORITY 0x04 -#define TWL4030_ADCR_EN 0x02 - -/* TWL4030_REG_ADCMICSEL (0x08) Fields */ -#define TWL4030_DIGMIC1_EN 0x08 -#define TWL4030_TX2IN_SEL 0x04 -#define TWL4030_DIGMIC0_EN 0x02 -#define TWL4030_TX1IN_SEL 0x01 - -/* AUDIO_IF (0x0E) Fields */ -#define TWL4030_AIF_SLAVE_EN 0x80 -#define TWL4030_DATA_WIDTH 0x60 -#define TWL4030_DATA_WIDTH_16S_16W 0x00 -#define TWL4030_DATA_WIDTH_32S_16W 0x40 -#define TWL4030_DATA_WIDTH_32S_24W 0x60 -#define TWL4030_AIF_FORMAT 0x18 -#define TWL4030_AIF_FORMAT_CODEC 0x00 -#define TWL4030_AIF_FORMAT_LEFT 0x08 -#define TWL4030_AIF_FORMAT_RIGHT 0x10 -#define TWL4030_AIF_FORMAT_TDM 0x18 -#define TWL4030_AIF_TRI_EN 0x04 -#define TWL4030_CLK256FS_EN 0x02 -#define TWL4030_AIF_EN 0x01 - -/* VOICE_IF (0x0F) Fields */ -#define TWL4030_VIF_SLAVE_EN 0x80 -#define TWL4030_VIF_DIN_EN 0x40 -#define TWL4030_VIF_DOUT_EN 0x20 -#define TWL4030_VIF_SWAP 0x10 -#define TWL4030_VIF_FORMAT 0x08 -#define TWL4030_VIF_TRI_EN 0x04 -#define TWL4030_VIF_SUB_EN 0x02 -#define TWL4030_VIF_EN 0x01 - -/* EAR_CTL (0x21) */ -#define TWL4030_EAR_GAIN 0x30 - -/* HS_GAIN_SET (0x23) Fields */ -#define TWL4030_HSR_GAIN 0x0C -#define TWL4030_HSR_GAIN_PWR_DOWN 0x00 -#define TWL4030_HSR_GAIN_PLUS_6DB 0x04 -#define TWL4030_HSR_GAIN_0DB 0x08 -#define TWL4030_HSR_GAIN_MINUS_6DB 0x0C -#define TWL4030_HSL_GAIN 0x03 -#define TWL4030_HSL_GAIN_PWR_DOWN 0x00 -#define TWL4030_HSL_GAIN_PLUS_6DB 0x01 -#define TWL4030_HSL_GAIN_0DB 0x02 -#define TWL4030_HSL_GAIN_MINUS_6DB 0x03 - -/* HS_POPN_SET (0x24) Fields */ -#define TWL4030_VMID_EN 0x40 -#define TWL4030_EXTMUTE 0x20 -#define TWL4030_RAMP_DELAY 0x1C -#define TWL4030_RAMP_DELAY_20MS 0x00 -#define TWL4030_RAMP_DELAY_40MS 0x04 -#define TWL4030_RAMP_DELAY_81MS 0x08 -#define TWL4030_RAMP_DELAY_161MS 0x0C -#define TWL4030_RAMP_DELAY_323MS 0x10 -#define TWL4030_RAMP_DELAY_645MS 0x14 -#define TWL4030_RAMP_DELAY_1291MS 0x18 -#define TWL4030_RAMP_DELAY_2581MS 0x1C -#define TWL4030_RAMP_EN 0x02 - -/* PREDL_CTL (0x25) */ -#define TWL4030_PREDL_GAIN 0x30 - -/* PREDR_CTL (0x26) */ -#define TWL4030_PREDR_GAIN 0x30 - -/* PRECKL_CTL (0x27) */ -#define TWL4030_PRECKL_GAIN 0x30 - -/* PRECKR_CTL (0x28) */ -#define TWL4030_PRECKR_GAIN 0x30 - -/* HFL_CTL (0x29, 0x2A) Fields */ -#define TWL4030_HF_CTL_HB_EN 0x04 -#define TWL4030_HF_CTL_LOOP_EN 0x08 -#define TWL4030_HF_CTL_RAMP_EN 0x10 -#define TWL4030_HF_CTL_REF_EN 0x20 - -/* APLL_CTL (0x3A) Fields */ -#define TWL4030_APLL_EN 0x10 -#define TWL4030_APLL_INFREQ 0x0F -#define TWL4030_APLL_INFREQ_19200KHZ 0x05 -#define TWL4030_APLL_INFREQ_26000KHZ 0x06 -#define TWL4030_APLL_INFREQ_38400KHZ 0x0F - -/* REG_MISC_SET_1 (0x3E) Fields */ -#define TWL4030_CLK64_EN 0x80 -#define TWL4030_SCRAMBLE_EN 0x40 -#define TWL4030_FMLOOP_EN 0x20 -#define TWL4030_SMOOTH_ANAVOL_EN 0x02 -#define TWL4030_DIGMIC_LR_SWAP_EN 0x01 - -/* VIBRA_CTL (0x45) */ -#define TWL4030_VIBRA_EN 0x01 -#define TWL4030_VIBRA_DIR 0x02 -#define TWL4030_VIBRA_AUDIO_SEL_L1 (0x00 << 2) -#define TWL4030_VIBRA_AUDIO_SEL_R1 (0x01 << 2) -#define TWL4030_VIBRA_AUDIO_SEL_L2 (0x02 << 2) -#define TWL4030_VIBRA_AUDIO_SEL_R2 (0x03 << 2) -#define TWL4030_VIBRA_SEL 0x10 -#define TWL4030_VIBRA_DIR_SEL 0x20 - -/* TWL4030 codec resource IDs */ -enum twl4030_codec_res { - TWL4030_CODEC_RES_POWER = 0, - TWL4030_CODEC_RES_APLL, - TWL4030_CODEC_RES_MAX, -}; - -int twl4030_codec_disable_resource(enum twl4030_codec_res id); -int twl4030_codec_enable_resource(enum twl4030_codec_res id); -unsigned int twl4030_codec_get_mclk(void); - -#endif /* End of __TWL4030_CODEC_H__ */ diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 98175a096df..0002220bbc3 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -236,7 +236,7 @@ config SND_SOC_TLV320DAC33 tristate config SND_SOC_TWL4030 - select TWL4030_CODEC + select MFD_TWL4030_AUDIO tristate config SND_SOC_TWL6040 diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c index bec788b1261..5e648d33d55 100644 --- a/sound/soc/codecs/twl4030.c +++ b/sound/soc/codecs/twl4030.c @@ -36,7 +36,7 @@ #include /* Register descriptions are here */ -#include +#include /* Shadow register used by the audio driver */ #define TWL4030_REG_SW_SHADOW 0x4A @@ -251,9 +251,9 @@ static void twl4030_codec_enable(struct snd_soc_codec *codec, int enable) return; if (enable) - mode = twl4030_codec_enable_resource(TWL4030_CODEC_RES_POWER); + mode = twl4030_audio_enable_resource(TWL4030_AUDIO_RES_POWER); else - mode = twl4030_codec_disable_resource(TWL4030_CODEC_RES_POWER); + mode = twl4030_audio_disable_resource(TWL4030_AUDIO_RES_POWER); if (mode >= 0) { twl4030_write_reg_cache(codec, TWL4030_REG_CODEC_MODE, mode); @@ -375,13 +375,13 @@ static void twl4030_apll_enable(struct snd_soc_codec *codec, int enable) if (enable) { twl4030->apll_enabled++; if (twl4030->apll_enabled == 1) - status = twl4030_codec_enable_resource( - TWL4030_CODEC_RES_APLL); + status = twl4030_audio_enable_resource( + TWL4030_AUDIO_RES_APLL); } else { twl4030->apll_enabled--; if (!twl4030->apll_enabled) - status = twl4030_codec_disable_resource( - TWL4030_CODEC_RES_APLL); + status = twl4030_audio_disable_resource( + TWL4030_AUDIO_RES_APLL); } if (status >= 0) @@ -2260,7 +2260,7 @@ static int twl4030_soc_probe(struct snd_soc_codec *codec) } snd_soc_codec_set_drvdata(codec, twl4030); /* Set the defaults, and power up the codec */ - twl4030->sysclk = twl4030_codec_get_mclk() / 1000; + twl4030->sysclk = twl4030_audio_get_mclk() / 1000; codec->dapm.idle_bias_off = 1; twl4030_init_chip(codec); diff --git a/sound/soc/omap/sdp3430.c b/sound/soc/omap/sdp3430.c index 3f72d17d1ef..9f6a758029d 100644 --- a/sound/soc/omap/sdp3430.c +++ b/sound/soc/omap/sdp3430.c @@ -36,7 +36,7 @@ #include /* Register descriptions for twl4030 codec part */ -#include +#include #include "omap-mcbsp.h" #include "omap-pcm.h" diff --git a/sound/soc/omap/zoom2.c b/sound/soc/omap/zoom2.c index 01709940a43..9a2666ffc16 100644 --- a/sound/soc/omap/zoom2.c +++ b/sound/soc/omap/zoom2.c @@ -32,7 +32,7 @@ #include /* Register descriptions for twl4030 codec part */ -#include +#include #include "omap-mcbsp.h" #include "omap-pcm.h" -- cgit v1.2.3-70-g09d2 From 4ae6df5e1018796ce260be59b2c603bd0f9faa94 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 31 May 2011 15:21:13 +0300 Subject: MFD: twl4030-audio: Rename platform data Allign the platform data names for twl4030 audio submodule: twl4030_audio_data: for the core MFD driver twl4030_codec_data: for ASoC codec driver twl4030_vibra_data: for the input/ForceFeedback driver To avoid breakage, change all depending drivers, files to use the new types. Signed-off-by: Peter Ujfalusi Acked-by: Samuel Ortiz --- arch/arm/mach-omap2/board-rx51-peripherals.c | 6 +++--- arch/arm/mach-omap2/board-zoom-peripherals.c | 10 +++++----- arch/arm/mach-omap2/twl-common.c | 10 +++++----- drivers/input/misc/twl4030-vibra.c | 2 +- drivers/mfd/twl-core.c | 8 ++++---- drivers/mfd/twl4030-audio.c | 8 ++++---- include/linux/i2c/twl.h | 12 ++++++------ sound/soc/codecs/twl4030.c | 6 +++--- sound/soc/codecs/twl6040.c | 2 +- 9 files changed, 32 insertions(+), 32 deletions(-) (limited to 'drivers/mfd') diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 6140290721a..f52bc61f35a 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -741,11 +741,11 @@ static struct twl4030_power_data rx51_t2scripts_data __initdata = { .resource_config = twl4030_rconfig, }; -struct twl4030_codec_vibra_data rx51_vibra_data __initdata = { +struct twl4030_vibra_data rx51_vibra_data __initdata = { .coexist = 0, }; -struct twl4030_codec_data rx51_codec_data __initdata = { +struct twl4030_audio_data rx51_audio_data __initdata = { .audio_mclk = 26000000, .vibra = &rx51_vibra_data, }; @@ -755,7 +755,7 @@ static struct twl4030_platform_data rx51_twldata __initdata = { .gpio = &rx51_gpio_data, .keypad = &rx51_kp_data, .power = &rx51_t2scripts_data, - .codec = &rx51_codec_data, + .audio = &rx51_audio_data, .vaux1 = &rx51_vaux1, .vaux2 = &rx51_vaux2, diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 13a64423366..6d0aa4fcb7c 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -274,12 +274,12 @@ static int __init omap_i2c_init(void) TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); if (machine_is_omap_zoom2()) { - struct twl4030_codec_audio_data *audio_data; - audio_data = zoom_twldata.codec->audio; + struct twl4030_codec_data *codec_data; + codec_data = zoom_twldata.audio->codec; - audio_data->ramp_delay_value = 3; /* 161 ms */ - audio_data->hs_extmute = 1; - audio_data->set_hs_extmute = zoom2_set_hs_extmute; + codec_data->ramp_delay_value = 3; /* 161 ms */ + codec_data->hs_extmute = 1; + codec_data->set_hs_extmute = zoom2_set_hs_extmute; } omap_pmic_init(1, 2400, "twl5030", INT_34XX_SYS_NIRQ, &zoom_twldata); omap_register_i2c_bus(2, 400, NULL, 0); diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 3aaa46f6cd1..2543342dbcc 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -80,11 +80,11 @@ static struct twl4030_madc_platform_data omap3_madc_pdata = { .irq_line = 1, }; -static struct twl4030_codec_audio_data omap3_audio; +static struct twl4030_codec_data omap3_codec; -static struct twl4030_codec_data omap3_codec_pdata = { +static struct twl4030_audio_data omap3_audio_pdata = { .audio_mclk = 26000000, - .audio = &omap3_audio, + .codec = &omap3_codec, }; static struct regulator_consumer_supply omap3_vdda_dac_supplies[] = { @@ -292,8 +292,8 @@ void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, if (pdata_flags & TWL_COMMON_PDATA_MADC && !pmic_data->madc) pmic_data->madc = &omap3_madc_pdata; - if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->codec) - pmic_data->codec = &omap3_codec_pdata; + if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->audio) + pmic_data->audio = &omap3_audio_pdata; /* Common regulator configurations */ if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac) diff --git a/drivers/input/misc/twl4030-vibra.c b/drivers/input/misc/twl4030-vibra.c index 7abca85b5a7..3c1a432c14d 100644 --- a/drivers/input/misc/twl4030-vibra.c +++ b/drivers/input/misc/twl4030-vibra.c @@ -196,7 +196,7 @@ static SIMPLE_DEV_PM_OPS(twl4030_vibra_pm_ops, static int __devinit twl4030_vibra_probe(struct platform_device *pdev) { - struct twl4030_codec_vibra_data *pdata = pdev->dev.platform_data; + struct twl4030_vibra_data *pdata = pdev->dev.platform_data; struct vibra_info *info; int ret; diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index b8f2a4e7f6e..f9d7880fd63 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -815,20 +815,20 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) return PTR_ERR(child); } - if (twl_has_codec() && pdata->codec && twl_class_is_4030()) { + if (twl_has_codec() && pdata->audio && twl_class_is_4030()) { sub_chip_id = twl_map[TWL_MODULE_AUDIO_VOICE].sid; child = add_child(sub_chip_id, "twl4030-audio", - pdata->codec, sizeof(*pdata->codec), + pdata->audio, sizeof(*pdata->audio), false, 0, 0); if (IS_ERR(child)) return PTR_ERR(child); } /* Phoenix codec driver is probed directly atm */ - if (twl_has_codec() && pdata->codec && twl_class_is_6030()) { + if (twl_has_codec() && pdata->audio && twl_class_is_6030()) { sub_chip_id = twl_map[TWL_MODULE_AUDIO_VOICE].sid; child = add_child(sub_chip_id, "twl6040-codec", - pdata->codec, sizeof(*pdata->codec), + pdata->audio, sizeof(*pdata->audio), false, 0, 0); if (IS_ERR(child)) return PTR_ERR(child); diff --git a/drivers/mfd/twl4030-audio.c b/drivers/mfd/twl4030-audio.c index 5cdf8414679..ae51ab5d0e5 100644 --- a/drivers/mfd/twl4030-audio.c +++ b/drivers/mfd/twl4030-audio.c @@ -159,7 +159,7 @@ EXPORT_SYMBOL_GPL(twl4030_audio_get_mclk); static int __devinit twl4030_audio_probe(struct platform_device *pdev) { struct twl4030_audio *audio; - struct twl4030_codec_data *pdata = pdev->dev.platform_data; + struct twl4030_audio_data *pdata = pdev->dev.platform_data; struct mfd_cell *cell = NULL; int ret, childs = 0; u8 val; @@ -206,11 +206,11 @@ static int __devinit twl4030_audio_probe(struct platform_device *pdev) audio->resource[TWL4030_AUDIO_RES_APLL].reg = TWL4030_REG_APLL_CTL; audio->resource[TWL4030_AUDIO_RES_APLL].mask = TWL4030_APLL_EN; - if (pdata->audio) { + if (pdata->codec) { cell = &audio->cells[childs]; cell->name = "twl4030-codec"; - cell->platform_data = pdata->audio; - cell->pdata_size = sizeof(*pdata->audio); + cell->platform_data = pdata->codec; + cell->pdata_size = sizeof(*pdata->codec); childs++; } if (pdata->vibra) { diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index ba4f88624fc..e0aba2b92fa 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -657,7 +657,7 @@ struct twl4030_power_data { extern void twl4030_power_init(struct twl4030_power_data *triton2_scripts); extern int twl4030_remove_script(u8 flags); -struct twl4030_codec_audio_data { +struct twl4030_codec_data { unsigned int digimic_delay; /* in ms */ unsigned int ramp_delay_value; unsigned int offset_cncl_path; @@ -667,14 +667,14 @@ struct twl4030_codec_audio_data { void (*set_hs_extmute)(int mute); }; -struct twl4030_codec_vibra_data { +struct twl4030_vibra_data { unsigned int coexist; }; -struct twl4030_codec_data { +struct twl4030_audio_data { unsigned int audio_mclk; - struct twl4030_codec_audio_data *audio; - struct twl4030_codec_vibra_data *vibra; + struct twl4030_codec_data *codec; + struct twl4030_vibra_data *vibra; /* twl6040 */ int audpwron_gpio; /* audio power-on gpio */ @@ -690,7 +690,7 @@ struct twl4030_platform_data { struct twl4030_keypad_data *keypad; struct twl4030_usb_data *usb; struct twl4030_power_data *power; - struct twl4030_codec_data *codec; + struct twl4030_audio_data *audio; /* Common LDO regulators for TWL4030/TWL6030 */ struct regulator_init_data *vdac; diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c index 5e648d33d55..71674bec960 100644 --- a/sound/soc/codecs/twl4030.c +++ b/sound/soc/codecs/twl4030.c @@ -297,7 +297,7 @@ static inline void twl4030_reset_registers(struct snd_soc_codec *codec) static void twl4030_init_chip(struct snd_soc_codec *codec) { - struct twl4030_codec_audio_data *pdata = dev_get_platdata(codec->dev); + struct twl4030_codec_data *pdata = dev_get_platdata(codec->dev); struct twl4030_priv *twl4030 = snd_soc_codec_get_drvdata(codec); u8 reg, byte; int i = 0; @@ -732,7 +732,7 @@ static int aif_event(struct snd_soc_dapm_widget *w, static void headset_ramp(struct snd_soc_codec *codec, int ramp) { - struct twl4030_codec_audio_data *pdata = codec->dev->platform_data; + struct twl4030_codec_data *pdata = codec->dev->platform_data; unsigned char hs_gain, hs_pop; struct twl4030_priv *twl4030 = snd_soc_codec_get_drvdata(codec); /* Base values for ramp delay calculation: 2^19 - 2^26 */ @@ -2297,7 +2297,7 @@ static struct snd_soc_codec_driver soc_codec_dev_twl4030 = { static int __devinit twl4030_codec_probe(struct platform_device *pdev) { - struct twl4030_codec_audio_data *pdata = pdev->dev.platform_data; + struct twl4030_codec_data *pdata = pdev->dev.platform_data; if (!pdata) { dev_err(&pdev->dev, "platform_data is missing\n"); diff --git a/sound/soc/codecs/twl6040.c b/sound/soc/codecs/twl6040.c index 4c336636d4f..ade6616bb79 100644 --- a/sound/soc/codecs/twl6040.c +++ b/sound/soc/codecs/twl6040.c @@ -1600,7 +1600,7 @@ static int twl6040_resume(struct snd_soc_codec *codec) static int twl6040_probe(struct snd_soc_codec *codec) { - struct twl4030_codec_data *twl_codec = codec->dev->platform_data; + struct twl4030_audio_data *twl_codec = codec->dev->platform_data; struct twl6040_data *priv; int audpwron, naudint; int ret = 0; -- cgit v1.2.3-70-g09d2 From f19b2823f82499c60ec15d5fe8783193d77e3043 Mon Sep 17 00:00:00 2001 From: Misael Lopez Cruz Date: Wed, 27 Apr 2011 02:14:07 -0500 Subject: mfd: twl6040: Add initial support TWL6040 IC provides analog high-end audio codec functions for handset applications. It contains several audio analog inputs and outputs as well as vibrator support. It's connected to the host processor via PDM interface for audio data communication. The audio modules are controlled by internal registers that can be accessed by I2C and PDM interface. TWL6040 MFD will be registered as a child of TWL-CORE, and will have two children of its own: twl6040-codec and twl6040-vibra. This driver is based on TWL4030 and WM8350 MFD drivers. Signed-off-by: Misael Lopez Cruz Signed-off-by: Peter Ujfalusi Acked-by: Samuel Ortiz --- arch/arm/plat-omap/include/plat/irqs.h | 12 +- drivers/mfd/Kconfig | 6 + drivers/mfd/Makefile | 1 + drivers/mfd/twl-core.c | 5 +- drivers/mfd/twl6040-core.c | 596 +++++++++++++++++++++++++++++++++ drivers/mfd/twl6040-irq.c | 205 ++++++++++++ include/linux/i2c/twl.h | 1 + include/linux/mfd/twl6040.h | 255 ++++++++++++++ 8 files changed, 1076 insertions(+), 5 deletions(-) create mode 100644 drivers/mfd/twl6040-core.c create mode 100644 drivers/mfd/twl6040-irq.c create mode 100644 include/linux/mfd/twl6040.h (limited to 'drivers/mfd') diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index c8843200566..926d25c780f 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -407,11 +407,19 @@ #endif #define TWL6030_IRQ_END (TWL6030_IRQ_BASE + TWL6030_BASE_NR_IRQS) +#define TWL6040_CODEC_IRQ_BASE TWL6030_IRQ_END +#ifdef CONFIG_TWL6040_CODEC +#define TWL6040_CODEC_NR_IRQS 6 +#else +#define TWL6040_CODEC_NR_IRQS 0 +#endif +#define TWL6040_CODEC_IRQ_END (TWL6040_CODEC_IRQ_BASE + TWL6040_CODEC_NR_IRQS) + /* Total number of interrupts depends on the enabled blocks above */ -#if (TWL4030_GPIO_IRQ_END > TWL6030_IRQ_END) +#if (TWL4030_GPIO_IRQ_END > TWL6040_CODEC_IRQ_END) #define TWL_IRQ_END TWL4030_GPIO_IRQ_END #else -#define TWL_IRQ_END TWL6030_IRQ_END +#define TWL_IRQ_END TWL6040_CODEC_IRQ_END #endif /* GPMC related */ diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 3a6f76aac00..ac6b4ae757c 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -233,6 +233,12 @@ config TWL6030_PWM Say yes here if you want support for TWL6030 PWM. This is used to control charging LED brightness. +config TWL6040_CORE + bool + depends on TWL4030_CORE && GENERIC_HARDIRQS + select MFD_CORE + default n + config MFD_STMPE bool "Support STMicroelectronics STMPE" depends on I2C=y && GENERIC_HARDIRQS diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 4cf946537e3..41f3b61ee9a 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -42,6 +42,7 @@ obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o obj-$(CONFIG_TWL4030_POWER) += twl4030-power.o obj-$(CONFIG_MFD_TWL4030_AUDIO) += twl4030-audio.o obj-$(CONFIG_TWL6030_PWM) += twl6030-pwm.o +obj-$(CONFIG_TWL6040_CORE) += twl6040-core.o twl6040-irq.o obj-$(CONFIG_MFD_MC13XXX) += mc13xxx-core.o diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index f9d7880fd63..a2eddc70995 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -110,7 +110,7 @@ #endif #if defined(CONFIG_TWL4030_CODEC) || defined(CONFIG_TWL4030_CODEC_MODULE) ||\ - defined(CONFIG_SND_SOC_TWL6040) || defined(CONFIG_SND_SOC_TWL6040_MODULE) + defined(CONFIG_TWL6040_CORE) || defined(CONFIG_TWL6040_CORE_MODULE) #define twl_has_codec() true #else #define twl_has_codec() false @@ -824,10 +824,9 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) return PTR_ERR(child); } - /* Phoenix codec driver is probed directly atm */ if (twl_has_codec() && pdata->audio && twl_class_is_6030()) { sub_chip_id = twl_map[TWL_MODULE_AUDIO_VOICE].sid; - child = add_child(sub_chip_id, "twl6040-codec", + child = add_child(sub_chip_id, "twl6040", pdata->audio, sizeof(*pdata->audio), false, 0, 0); if (IS_ERR(child)) diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c new file mode 100644 index 00000000000..57ae36bae80 --- /dev/null +++ b/drivers/mfd/twl6040-core.c @@ -0,0 +1,596 @@ +/* + * MFD driver for TWL6040 audio device + * + * Authors: Misael Lopez Cruz + * Jorge Eduardo Candelaria + * Peter Ujfalusi + * + * Copyright: (C) 2011 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct platform_device *twl6040_dev; + +int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg) +{ + int ret; + u8 val = 0; + + mutex_lock(&twl6040->io_mutex); + ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg); + if (ret < 0) { + mutex_unlock(&twl6040->io_mutex); + return ret; + } + mutex_unlock(&twl6040->io_mutex); + + return val; +} +EXPORT_SYMBOL(twl6040_reg_read); + +int twl6040_reg_write(struct twl6040 *twl6040, unsigned int reg, u8 val) +{ + int ret; + + mutex_lock(&twl6040->io_mutex); + ret = twl_i2c_write_u8(TWL_MODULE_AUDIO_VOICE, val, reg); + mutex_unlock(&twl6040->io_mutex); + + return ret; +} +EXPORT_SYMBOL(twl6040_reg_write); + +int twl6040_set_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask) +{ + int ret; + u8 val; + + mutex_lock(&twl6040->io_mutex); + ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg); + if (ret) + goto out; + + val |= mask; + ret = twl_i2c_write_u8(TWL_MODULE_AUDIO_VOICE, val, reg); +out: + mutex_unlock(&twl6040->io_mutex); + return ret; +} +EXPORT_SYMBOL(twl6040_set_bits); + +int twl6040_clear_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask) +{ + int ret; + u8 val; + + mutex_lock(&twl6040->io_mutex); + ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg); + if (ret) + goto out; + + val &= ~mask; + ret = twl_i2c_write_u8(TWL_MODULE_AUDIO_VOICE, val, reg); +out: + mutex_unlock(&twl6040->io_mutex); + return ret; +} +EXPORT_SYMBOL(twl6040_clear_bits); + +/* twl6040 codec manual power-up sequence */ +static int twl6040_power_up(struct twl6040 *twl6040) +{ + u8 ldoctl, ncpctl, lppllctl; + int ret; + + /* enable high-side LDO, reference system and internal oscillator */ + ldoctl = TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA; + ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); + if (ret) + return ret; + usleep_range(10000, 10500); + + /* enable negative charge pump */ + ncpctl = TWL6040_NCPENA; + ret = twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl); + if (ret) + goto ncp_err; + usleep_range(1000, 1500); + + /* enable low-side LDO */ + ldoctl |= TWL6040_LSLDOENA; + ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); + if (ret) + goto lsldo_err; + usleep_range(1000, 1500); + + /* enable low-power PLL */ + lppllctl = TWL6040_LPLLENA; + ret = twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl); + if (ret) + goto lppll_err; + usleep_range(5000, 5500); + + /* disable internal oscillator */ + ldoctl &= ~TWL6040_OSCENA; + ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); + if (ret) + goto osc_err; + + return 0; + +osc_err: + lppllctl &= ~TWL6040_LPLLENA; + twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl); +lppll_err: + ldoctl &= ~TWL6040_LSLDOENA; + twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); +lsldo_err: + ncpctl &= ~TWL6040_NCPENA; + twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl); +ncp_err: + ldoctl &= ~(TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA); + twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); + + return ret; +} + +/* twl6040 manual power-down sequence */ +static void twl6040_power_down(struct twl6040 *twl6040) +{ + u8 ncpctl, ldoctl, lppllctl; + + ncpctl = twl6040_reg_read(twl6040, TWL6040_REG_NCPCTL); + ldoctl = twl6040_reg_read(twl6040, TWL6040_REG_LDOCTL); + lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL); + + /* enable internal oscillator */ + ldoctl |= TWL6040_OSCENA; + twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); + usleep_range(1000, 1500); + + /* disable low-power PLL */ + lppllctl &= ~TWL6040_LPLLENA; + twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl); + + /* disable low-side LDO */ + ldoctl &= ~TWL6040_LSLDOENA; + twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); + + /* disable negative charge pump */ + ncpctl &= ~TWL6040_NCPENA; + twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl); + + /* disable high-side LDO, reference system and internal oscillator */ + ldoctl &= ~(TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA); + twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); +} + +static irqreturn_t twl6040_naudint_handler(int irq, void *data) +{ + struct twl6040 *twl6040 = data; + u8 intid, status; + + intid = twl6040_reg_read(twl6040, TWL6040_REG_INTID); + + if (intid & TWL6040_READYINT) + complete(&twl6040->ready); + + if (intid & TWL6040_THINT) { + status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS); + if (status & TWL6040_TSHUTDET) { + dev_warn(&twl6040_dev->dev, + "Thermal shutdown, powering-off"); + twl6040_power(twl6040, 0); + } else { + dev_warn(&twl6040_dev->dev, + "Leaving thermal shutdown, powering-on"); + twl6040_power(twl6040, 1); + } + } + + return IRQ_HANDLED; +} + +static int twl6040_power_up_completion(struct twl6040 *twl6040, + int naudint) +{ + int time_left; + u8 intid; + + time_left = wait_for_completion_timeout(&twl6040->ready, + msecs_to_jiffies(144)); + if (!time_left) { + intid = twl6040_reg_read(twl6040, TWL6040_REG_INTID); + if (!(intid & TWL6040_READYINT)) { + dev_err(&twl6040_dev->dev, + "timeout waiting for READYINT\n"); + return -ETIMEDOUT; + } + } + + return 0; +} + +int twl6040_power(struct twl6040 *twl6040, int on) +{ + int audpwron = twl6040->audpwron; + int naudint = twl6040->irq; + int ret = 0; + + mutex_lock(&twl6040->mutex); + + if (on) { + /* already powered-up */ + if (twl6040->power_count++) + goto out; + + if (gpio_is_valid(audpwron)) { + /* use AUDPWRON line */ + gpio_set_value(audpwron, 1); + /* wait for power-up completion */ + ret = twl6040_power_up_completion(twl6040, naudint); + if (ret) { + dev_err(&twl6040_dev->dev, + "automatic power-down failed\n"); + twl6040->power_count = 0; + goto out; + } + } else { + /* use manual power-up sequence */ + ret = twl6040_power_up(twl6040); + if (ret) { + dev_err(&twl6040_dev->dev, + "manual power-up failed\n"); + twl6040->power_count = 0; + goto out; + } + } + twl6040->pll = TWL6040_LPPLL_ID; + twl6040->sysclk = 19200000; + } else { + /* already powered-down */ + if (!twl6040->power_count) { + dev_err(&twl6040_dev->dev, + "device is already powered-off\n"); + ret = -EPERM; + goto out; + } + + if (--twl6040->power_count) + goto out; + + if (gpio_is_valid(audpwron)) { + /* use AUDPWRON line */ + gpio_set_value(audpwron, 0); + + /* power-down sequence latency */ + usleep_range(500, 700); + } else { + /* use manual power-down sequence */ + twl6040_power_down(twl6040); + } + twl6040->pll = TWL6040_NOPLL_ID; + twl6040->sysclk = 0; + } + +out: + mutex_unlock(&twl6040->mutex); + return ret; +} +EXPORT_SYMBOL(twl6040_power); + +int twl6040_set_pll(struct twl6040 *twl6040, enum twl6040_pll_id id, + unsigned int freq_in, unsigned int freq_out) +{ + u8 hppllctl, lppllctl; + int ret = 0; + + mutex_lock(&twl6040->mutex); + + hppllctl = twl6040_reg_read(twl6040, TWL6040_REG_HPPLLCTL); + lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL); + + switch (id) { + case TWL6040_LPPLL_ID: + /* low-power PLL divider */ + switch (freq_out) { + case 17640000: + lppllctl |= TWL6040_LPLLFIN; + break; + case 19200000: + lppllctl &= ~TWL6040_LPLLFIN; + break; + default: + dev_err(&twl6040_dev->dev, + "freq_out %d not supported\n", freq_out); + ret = -EINVAL; + goto pll_out; + } + twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl); + + switch (freq_in) { + case 32768: + lppllctl |= TWL6040_LPLLENA; + twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, + lppllctl); + mdelay(5); + lppllctl &= ~TWL6040_HPLLSEL; + twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, + lppllctl); + hppllctl &= ~TWL6040_HPLLENA; + twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL, + hppllctl); + break; + default: + dev_err(&twl6040_dev->dev, + "freq_in %d not supported\n", freq_in); + ret = -EINVAL; + goto pll_out; + } + + twl6040->pll = TWL6040_LPPLL_ID; + break; + case TWL6040_HPPLL_ID: + /* high-performance PLL can provide only 19.2 MHz */ + if (freq_out != 19200000) { + dev_err(&twl6040_dev->dev, + "freq_out %d not supported\n", freq_out); + ret = -EINVAL; + goto pll_out; + } + + hppllctl &= ~TWL6040_MCLK_MSK; + + switch (freq_in) { + case 12000000: + /* PLL enabled, active mode */ + hppllctl |= TWL6040_MCLK_12000KHZ | + TWL6040_HPLLENA; + break; + case 19200000: + /* + * PLL disabled + * (enable PLL if MCLK jitter quality + * doesn't meet specification) + */ + hppllctl |= TWL6040_MCLK_19200KHZ; + break; + case 26000000: + /* PLL enabled, active mode */ + hppllctl |= TWL6040_MCLK_26000KHZ | + TWL6040_HPLLENA; + break; + case 38400000: + /* PLL enabled, active mode */ + hppllctl |= TWL6040_MCLK_38400KHZ | + TWL6040_HPLLENA; + break; + default: + dev_err(&twl6040_dev->dev, + "freq_in %d not supported\n", freq_in); + ret = -EINVAL; + goto pll_out; + } + + /* enable clock slicer to ensure input waveform is square */ + hppllctl |= TWL6040_HPLLSQRENA; + + twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL, hppllctl); + usleep_range(500, 700); + lppllctl |= TWL6040_HPLLSEL; + twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl); + lppllctl &= ~TWL6040_LPLLENA; + twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl); + + twl6040->pll = TWL6040_HPPLL_ID; + break; + default: + dev_err(&twl6040_dev->dev, "unknown pll id %d\n", id); + ret = -EINVAL; + goto pll_out; + } + + twl6040->sysclk = freq_out; + +pll_out: + mutex_unlock(&twl6040->mutex); + return ret; +} +EXPORT_SYMBOL(twl6040_set_pll); + +enum twl6040_pll_id twl6040_get_pll(struct twl6040 *twl6040) +{ + return twl6040->pll; +} +EXPORT_SYMBOL(twl6040_get_pll); + +unsigned int twl6040_get_sysclk(struct twl6040 *twl6040) +{ + return twl6040->sysclk; +} +EXPORT_SYMBOL(twl6040_get_sysclk); + +static int __devinit twl6040_probe(struct platform_device *pdev) +{ + struct twl4030_audio_data *pdata = pdev->dev.platform_data; + struct twl6040 *twl6040; + struct mfd_cell *cell = NULL; + int ret, children = 0; + + if (!pdata) { + dev_err(&pdev->dev, "Platform data is missing\n"); + return -EINVAL; + } + + twl6040 = kzalloc(sizeof(struct twl6040), GFP_KERNEL); + if (!twl6040) + return -ENOMEM; + + platform_set_drvdata(pdev, twl6040); + + twl6040_dev = pdev; + twl6040->dev = &pdev->dev; + twl6040->audpwron = pdata->audpwron_gpio; + twl6040->irq = pdata->naudint_irq; + twl6040->irq_base = pdata->irq_base; + + mutex_init(&twl6040->mutex); + mutex_init(&twl6040->io_mutex); + init_completion(&twl6040->ready); + + twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV); + + if (gpio_is_valid(twl6040->audpwron)) { + ret = gpio_request(twl6040->audpwron, "audpwron"); + if (ret) + goto gpio1_err; + + ret = gpio_direction_output(twl6040->audpwron, 0); + if (ret) + goto gpio2_err; + } + + /* ERRATA: Automatic power-up is not possible in ES1.0 */ + if (twl6040->rev == TWL6040_REV_ES1_0) + twl6040->audpwron = -EINVAL; + + if (twl6040->irq) { + /* codec interrupt */ + ret = twl6040_irq_init(twl6040); + if (ret) + goto gpio2_err; + + ret = twl6040_request_irq(twl6040, TWL6040_IRQ_READY, + twl6040_naudint_handler, 0, + "twl6040_irq_ready", twl6040); + if (ret) { + dev_err(twl6040->dev, "READY IRQ request failed: %d\n", + ret); + goto irq_err; + } + } + + /* dual-access registers controlled by I2C only */ + twl6040_set_bits(twl6040, TWL6040_REG_ACCCTL, TWL6040_I2CSEL); + + if (pdata->codec) { + cell = &twl6040->cells[children]; + cell->name = "twl6040-codec"; + /* The codec expects the twl4030_audio_data as platform data */ + cell->platform_data = pdata; + cell->pdata_size = sizeof(*pdata); + children++; + } + + if (pdata->vibra) { + cell = &twl6040->cells[children]; + cell->name = "twl6040-vibra"; + cell->platform_data = pdata->vibra; + cell->pdata_size = sizeof(*pdata->vibra); + children++; + } + + if (children) { + ret = mfd_add_devices(&pdev->dev, pdev->id, twl6040->cells, + children, NULL, 0); + if (ret) + goto mfd_err; + } else { + dev_err(&pdev->dev, "No platform data found for children\n"); + ret = -ENODEV; + goto mfd_err; + } + + return 0; + +mfd_err: + if (twl6040->irq) + twl6040_free_irq(twl6040, TWL6040_IRQ_READY, twl6040); +irq_err: + if (twl6040->irq) + twl6040_irq_exit(twl6040); +gpio2_err: + if (gpio_is_valid(twl6040->audpwron)) + gpio_free(twl6040->audpwron); +gpio1_err: + platform_set_drvdata(pdev, NULL); + kfree(twl6040); + twl6040_dev = NULL; + return ret; +} + +static int __devexit twl6040_remove(struct platform_device *pdev) +{ + struct twl6040 *twl6040 = platform_get_drvdata(pdev); + + if (twl6040->power_count) + twl6040_power(twl6040, 0); + + if (gpio_is_valid(twl6040->audpwron)) + gpio_free(twl6040->audpwron); + + twl6040_free_irq(twl6040, TWL6040_IRQ_READY, twl6040); + + if (twl6040->irq) + twl6040_irq_exit(twl6040); + + mfd_remove_devices(&pdev->dev); + platform_set_drvdata(pdev, NULL); + kfree(twl6040); + twl6040_dev = NULL; + + return 0; +} + +static struct platform_driver twl6040_driver = { + .probe = twl6040_probe, + .remove = __devexit_p(twl6040_remove), + .driver = { + .owner = THIS_MODULE, + .name = "twl6040", + }, +}; + +static int __devinit twl6040_init(void) +{ + return platform_driver_register(&twl6040_driver); +} +module_init(twl6040_init); + +static void __devexit twl6040_exit(void) +{ + platform_driver_unregister(&twl6040_driver); +} + +module_exit(twl6040_exit); + +MODULE_DESCRIPTION("TWL6040 MFD"); +MODULE_AUTHOR("Misael Lopez Cruz "); +MODULE_AUTHOR("Jorge Eduardo Candelaria "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:twl6040"); diff --git a/drivers/mfd/twl6040-irq.c b/drivers/mfd/twl6040-irq.c new file mode 100644 index 00000000000..93805354152 --- /dev/null +++ b/drivers/mfd/twl6040-irq.c @@ -0,0 +1,205 @@ +/* + * Interrupt controller support for TWL6040 + * + * Author: Misael Lopez Cruz + * + * Copyright: (C) 2011 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include +#include +#include +#include +#include + +struct twl6040_irq_data { + int mask; + int status; +}; + +static struct twl6040_irq_data twl6040_irqs[] = { + { + .mask = TWL6040_THMSK, + .status = TWL6040_THINT, + }, + { + .mask = TWL6040_PLUGMSK, + .status = TWL6040_PLUGINT | TWL6040_UNPLUGINT, + }, + { + .mask = TWL6040_HOOKMSK, + .status = TWL6040_HOOKINT, + }, + { + .mask = TWL6040_HFMSK, + .status = TWL6040_HFINT, + }, + { + .mask = TWL6040_VIBMSK, + .status = TWL6040_VIBINT, + }, + { + .mask = TWL6040_READYMSK, + .status = TWL6040_READYINT, + }, +}; + +static inline +struct twl6040_irq_data *irq_to_twl6040_irq(struct twl6040 *twl6040, + int irq) +{ + return &twl6040_irqs[irq - twl6040->irq_base]; +} + +static void twl6040_irq_lock(struct irq_data *data) +{ + struct twl6040 *twl6040 = irq_data_get_irq_chip_data(data); + + mutex_lock(&twl6040->irq_mutex); +} + +static void twl6040_irq_sync_unlock(struct irq_data *data) +{ + struct twl6040 *twl6040 = irq_data_get_irq_chip_data(data); + + /* write back to hardware any change in irq mask */ + if (twl6040->irq_masks_cur != twl6040->irq_masks_cache) { + twl6040->irq_masks_cache = twl6040->irq_masks_cur; + twl6040_reg_write(twl6040, TWL6040_REG_INTMR, + twl6040->irq_masks_cur); + } + + mutex_unlock(&twl6040->irq_mutex); +} + +static void twl6040_irq_enable(struct irq_data *data) +{ + struct twl6040 *twl6040 = irq_data_get_irq_chip_data(data); + struct twl6040_irq_data *irq_data = irq_to_twl6040_irq(twl6040, + data->irq); + + twl6040->irq_masks_cur &= ~irq_data->mask; +} + +static void twl6040_irq_disable(struct irq_data *data) +{ + struct twl6040 *twl6040 = irq_data_get_irq_chip_data(data); + struct twl6040_irq_data *irq_data = irq_to_twl6040_irq(twl6040, + data->irq); + + twl6040->irq_masks_cur |= irq_data->mask; +} + +static struct irq_chip twl6040_irq_chip = { + .name = "twl6040", + .irq_bus_lock = twl6040_irq_lock, + .irq_bus_sync_unlock = twl6040_irq_sync_unlock, + .irq_enable = twl6040_irq_enable, + .irq_disable = twl6040_irq_disable, +}; + +static irqreturn_t twl6040_irq_thread(int irq, void *data) +{ + struct twl6040 *twl6040 = data; + u8 intid; + int i; + + intid = twl6040_reg_read(twl6040, TWL6040_REG_INTID); + + /* apply masking and report (backwards to handle READYINT first) */ + for (i = ARRAY_SIZE(twl6040_irqs) - 1; i >= 0; i--) { + if (twl6040->irq_masks_cur & twl6040_irqs[i].mask) + intid &= ~twl6040_irqs[i].status; + if (intid & twl6040_irqs[i].status) + handle_nested_irq(twl6040->irq_base + i); + } + + /* ack unmasked irqs */ + twl6040_reg_write(twl6040, TWL6040_REG_INTID, intid); + + return IRQ_HANDLED; +} + +int twl6040_irq_init(struct twl6040 *twl6040) +{ + int cur_irq, ret; + u8 val; + + mutex_init(&twl6040->irq_mutex); + + /* mask the individual interrupt sources */ + twl6040->irq_masks_cur = TWL6040_ALLINT_MSK; + twl6040->irq_masks_cache = TWL6040_ALLINT_MSK; + twl6040_reg_write(twl6040, TWL6040_REG_INTMR, TWL6040_ALLINT_MSK); + + if (!twl6040->irq) { + dev_warn(twl6040->dev, + "no interrupt specified, no interrupts\n"); + twl6040->irq_base = 0; + return 0; + } + + if (!twl6040->irq_base) { + dev_err(twl6040->dev, + "no interrupt base specified, no interrupts\n"); + return 0; + } + + /* Register them with genirq */ + for (cur_irq = twl6040->irq_base; + cur_irq < twl6040->irq_base + ARRAY_SIZE(twl6040_irqs); + cur_irq++) { + irq_set_chip_data(cur_irq, twl6040); + irq_set_chip_and_handler(cur_irq, &twl6040_irq_chip, + handle_level_irq); + irq_set_nested_thread(cur_irq, 1); + + /* ARM needs us to explicitly flag the IRQ as valid + * and will set them noprobe when we do so. */ +#ifdef CONFIG_ARM + set_irq_flags(cur_irq, IRQF_VALID); +#else + irq_set_noprobe(cur_irq); +#endif + } + + ret = request_threaded_irq(twl6040->irq, NULL, twl6040_irq_thread, + IRQF_ONESHOT, "twl6040", twl6040); + if (ret) { + dev_err(twl6040->dev, "failed to request IRQ %d: %d\n", + twl6040->irq, ret); + return ret; + } + + /* reset interrupts */ + val = twl6040_reg_read(twl6040, TWL6040_REG_INTID); + + /* interrupts cleared on write */ + twl6040_clear_bits(twl6040, TWL6040_REG_ACCCTL, TWL6040_INTCLRMODE); + + return 0; +} +EXPORT_SYMBOL(twl6040_irq_init); + +void twl6040_irq_exit(struct twl6040 *twl6040) +{ + if (twl6040->irq) + free_irq(twl6040->irq, twl6040); +} +EXPORT_SYMBOL(twl6040_irq_exit); diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index e0aba2b92fa..ea5baa26922 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -679,6 +679,7 @@ struct twl4030_audio_data { /* twl6040 */ int audpwron_gpio; /* audio power-on gpio */ int naudint_irq; /* audio interrupt */ + unsigned int irq_base; }; struct twl4030_platform_data { diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h new file mode 100644 index 00000000000..c3c1de53dcf --- /dev/null +++ b/include/linux/mfd/twl6040.h @@ -0,0 +1,255 @@ +/* + * MFD driver for twl6040 + * + * Authors: Jorge Eduardo Candelaria + * Misael Lopez Cruz + * + * Copyright: (C) 2011 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __TWL6040_CODEC_H__ +#define __TWL6040_CODEC_H__ + +#include +#include + +#define TWL6040_REG_ASICID 0x01 +#define TWL6040_REG_ASICREV 0x02 +#define TWL6040_REG_INTID 0x03 +#define TWL6040_REG_INTMR 0x04 +#define TWL6040_REG_NCPCTL 0x05 +#define TWL6040_REG_LDOCTL 0x06 +#define TWL6040_REG_HPPLLCTL 0x07 +#define TWL6040_REG_LPPLLCTL 0x08 +#define TWL6040_REG_LPPLLDIV 0x09 +#define TWL6040_REG_AMICBCTL 0x0A +#define TWL6040_REG_DMICBCTL 0x0B +#define TWL6040_REG_MICLCTL 0x0C +#define TWL6040_REG_MICRCTL 0x0D +#define TWL6040_REG_MICGAIN 0x0E +#define TWL6040_REG_LINEGAIN 0x0F +#define TWL6040_REG_HSLCTL 0x10 +#define TWL6040_REG_HSRCTL 0x11 +#define TWL6040_REG_HSGAIN 0x12 +#define TWL6040_REG_EARCTL 0x13 +#define TWL6040_REG_HFLCTL 0x14 +#define TWL6040_REG_HFLGAIN 0x15 +#define TWL6040_REG_HFRCTL 0x16 +#define TWL6040_REG_HFRGAIN 0x17 +#define TWL6040_REG_VIBCTLL 0x18 +#define TWL6040_REG_VIBDATL 0x19 +#define TWL6040_REG_VIBCTLR 0x1A +#define TWL6040_REG_VIBDATR 0x1B +#define TWL6040_REG_HKCTL1 0x1C +#define TWL6040_REG_HKCTL2 0x1D +#define TWL6040_REG_GPOCTL 0x1E +#define TWL6040_REG_ALB 0x1F +#define TWL6040_REG_DLB 0x20 +#define TWL6040_REG_TRIM1 0x28 +#define TWL6040_REG_TRIM2 0x29 +#define TWL6040_REG_TRIM3 0x2A +#define TWL6040_REG_HSOTRIM 0x2B +#define TWL6040_REG_HFOTRIM 0x2C +#define TWL6040_REG_ACCCTL 0x2D +#define TWL6040_REG_STATUS 0x2E + +#define TWL6040_CACHEREGNUM (TWL6040_REG_STATUS + 1) + +#define TWL6040_VIOREGNUM 18 +#define TWL6040_VDDREGNUM 21 + +/* INTID (0x03) fields */ + +#define TWL6040_THINT 0x01 +#define TWL6040_PLUGINT 0x02 +#define TWL6040_UNPLUGINT 0x04 +#define TWL6040_HOOKINT 0x08 +#define TWL6040_HFINT 0x10 +#define TWL6040_VIBINT 0x20 +#define TWL6040_READYINT 0x40 + +/* INTMR (0x04) fields */ + +#define TWL6040_THMSK 0x01 +#define TWL6040_PLUGMSK 0x02 +#define TWL6040_HOOKMSK 0x08 +#define TWL6040_HFMSK 0x10 +#define TWL6040_VIBMSK 0x20 +#define TWL6040_READYMSK 0x40 +#define TWL6040_ALLINT_MSK 0x7B + +/* NCPCTL (0x05) fields */ + +#define TWL6040_NCPENA 0x01 +#define TWL6040_NCPOPEN 0x40 + +/* LDOCTL (0x06) fields */ + +#define TWL6040_LSLDOENA 0x01 +#define TWL6040_HSLDOENA 0x04 +#define TWL6040_REFENA 0x40 +#define TWL6040_OSCENA 0x80 + +/* HPPLLCTL (0x07) fields */ + +#define TWL6040_HPLLENA 0x01 +#define TWL6040_HPLLRST 0x02 +#define TWL6040_HPLLBP 0x04 +#define TWL6040_HPLLSQRENA 0x08 +#define TWL6040_MCLK_12000KHZ (0 << 5) +#define TWL6040_MCLK_19200KHZ (1 << 5) +#define TWL6040_MCLK_26000KHZ (2 << 5) +#define TWL6040_MCLK_38400KHZ (3 << 5) +#define TWL6040_MCLK_MSK 0x60 + +/* LPPLLCTL (0x08) fields */ + +#define TWL6040_LPLLENA 0x01 +#define TWL6040_LPLLRST 0x02 +#define TWL6040_LPLLSEL 0x04 +#define TWL6040_LPLLFIN 0x08 +#define TWL6040_HPLLSEL 0x10 + +/* HSLCTL (0x10) fields */ + +#define TWL6040_HSDACMODEL 0x02 +#define TWL6040_HSDRVMODEL 0x08 + +/* HSRCTL (0x11) fields */ + +#define TWL6040_HSDACMODER 0x02 +#define TWL6040_HSDRVMODER 0x08 + +/* VIBCTLL (0x18) fields */ + +#define TWL6040_VIBENAL 0x01 +#define TWL6040_VIBCTRLL 0x04 +#define TWL6040_VIBCTRLLP 0x08 +#define TWL6040_VIBCTRLLN 0x10 + +/* VIBDATL (0x19) fields */ + +#define TWL6040_VIBDAT_MAX 0x64 + +/* VIBCTLR (0x1A) fields */ + +#define TWL6040_VIBENAR 0x01 +#define TWL6040_VIBCTRLR 0x04 +#define TWL6040_VIBCTRLRP 0x08 +#define TWL6040_VIBCTRLRN 0x10 + +/* GPOCTL (0x1E) fields */ + +#define TWL6040_GPO1 0x01 +#define TWL6040_GPO2 0x02 +#define TWL6040_GPO3 0x03 + +/* ACCCTL (0x2D) fields */ + +#define TWL6040_I2CSEL 0x01 +#define TWL6040_RESETSPLIT 0x04 +#define TWL6040_INTCLRMODE 0x08 + +#define TWL6040_SYSCLK_SEL_LPPLL 1 +#define TWL6040_SYSCLK_SEL_HPPLL 2 + +/* STATUS (0x2E) fields */ + +#define TWL6040_PLUGCOMP 0x02 +#define TWL6040_VIBLOCDET 0x10 +#define TWL6040_VIBROCDET 0x20 +#define TWL6040_TSHUTDET 0x40 + +#define TWL6040_CELLS 2 + +#define TWL6040_REV_ES1_0 0x00 +#define TWL6040_REV_ES1_1 0x01 +#define TWL6040_REV_ES1_2 0x02 + +#define TWL6040_IRQ_TH 0 +#define TWL6040_IRQ_PLUG 1 +#define TWL6040_IRQ_HOOK 2 +#define TWL6040_IRQ_HF 3 +#define TWL6040_IRQ_VIB 4 +#define TWL6040_IRQ_READY 5 + +enum twl6040_pll_id { + TWL6040_NOPLL_ID, + TWL6040_LPPLL_ID, + TWL6040_HPPLL_ID, +}; + +struct twl6040 { + struct device *dev; + struct mutex mutex; + struct mutex io_mutex; + struct mutex irq_mutex; + struct mfd_cell cells[TWL6040_CELLS]; + struct completion ready; + + int audpwron; + int power_count; + int rev; + + enum twl6040_pll_id pll; + unsigned int sysclk; + + unsigned int irq; + unsigned int irq_base; + u8 irq_masks_cur; + u8 irq_masks_cache; +}; + +static inline int twl6040_request_irq(struct twl6040 *twl6040, int irq, + irq_handler_t handler, + unsigned long irqflags, + const char *name, + void *data) +{ + if (!twl6040->irq_base) + return -EINVAL; + + return request_threaded_irq(twl6040->irq_base + irq, NULL, handler, + irqflags, name, data); +} + +static inline void twl6040_free_irq(struct twl6040 *twl6040, int irq, + void *data) +{ + if (!twl6040->irq_base) + return; + + free_irq(twl6040->irq_base + irq, data); +} + +int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg); +int twl6040_reg_write(struct twl6040 *twl6040, unsigned int reg, + u8 val); +int twl6040_set_bits(struct twl6040 *twl6040, unsigned int reg, + u8 mask); +int twl6040_clear_bits(struct twl6040 *twl6040, unsigned int reg, + u8 mask); +int twl6040_power(struct twl6040 *twl6040, int on); +int twl6040_set_pll(struct twl6040 *twl6040, enum twl6040_pll_id id, + unsigned int freq_in, unsigned int freq_out); +enum twl6040_pll_id twl6040_get_pll(struct twl6040 *twl6040); +unsigned int twl6040_get_sysclk(struct twl6040 *twl6040); +int twl6040_irq_init(struct twl6040 *twl6040); +void twl6040_irq_exit(struct twl6040 *twl6040); + +#endif /* End of __TWL6040_CODEC_H__ */ -- cgit v1.2.3-70-g09d2 From 6c44863763254eaf96ec7d4f816fb88605301e76 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 1 Jun 2011 13:05:10 +0300 Subject: MFD: twl6040: Change platform data for soc codec driver Pass twl4030_codec_data instead of the twl4030_audio_data for the ASoC codec driver. Signed-off-by: Peter Ujfalusi Acked-by: Samuel Ortiz --- drivers/mfd/twl6040-core.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c index 57ae36bae80..cfaedb5581a 100644 --- a/drivers/mfd/twl6040-core.c +++ b/drivers/mfd/twl6040-core.c @@ -501,9 +501,8 @@ static int __devinit twl6040_probe(struct platform_device *pdev) if (pdata->codec) { cell = &twl6040->cells[children]; cell->name = "twl6040-codec"; - /* The codec expects the twl4030_audio_data as platform data */ - cell->platform_data = pdata; - cell->pdata_size = sizeof(*pdata); + cell->platform_data = pdata->codec; + cell->pdata_size = sizeof(*pdata->codec); children++; } -- cgit v1.2.3-70-g09d2 From 0f962ae2dd8655f0800ff3c4b02d5f5a2ff3899e Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 5 Jul 2011 11:40:33 +0300 Subject: MFD: twl6040: Use resource to provide irq number for slaves Provide the irq number for slaves via resource on the platform device. The irq number configuration is done in the twl6040-core at probe time, so machine drivers do not need to be modified. Signed-off-by: Peter Ujfalusi Reviewed-by: Felipe Balbi Acked-by: Samuel Ortiz --- drivers/mfd/twl6040-core.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'drivers/mfd') diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c index cfaedb5581a..471f4895fb9 100644 --- a/drivers/mfd/twl6040-core.c +++ b/drivers/mfd/twl6040-core.c @@ -435,6 +435,18 @@ unsigned int twl6040_get_sysclk(struct twl6040 *twl6040) } EXPORT_SYMBOL(twl6040_get_sysclk); +static struct resource twl6040_vibra_rsrc[] = { + { + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource twl6040_codec_rsrc[] = { + { + .flags = IORESOURCE_IRQ, + }, +}; + static int __devinit twl6040_probe(struct platform_device *pdev) { struct twl4030_audio_data *pdata = pdev->dev.platform_data; @@ -499,16 +511,29 @@ static int __devinit twl6040_probe(struct platform_device *pdev) twl6040_set_bits(twl6040, TWL6040_REG_ACCCTL, TWL6040_I2CSEL); if (pdata->codec) { + int irq = twl6040->irq_base + TWL6040_IRQ_PLUG; + cell = &twl6040->cells[children]; cell->name = "twl6040-codec"; + twl6040_codec_rsrc[0].start = irq; + twl6040_codec_rsrc[0].end = irq; + cell->resources = twl6040_codec_rsrc; + cell->num_resources = ARRAY_SIZE(twl6040_codec_rsrc); cell->platform_data = pdata->codec; cell->pdata_size = sizeof(*pdata->codec); children++; } if (pdata->vibra) { + int irq = twl6040->irq_base + TWL6040_IRQ_VIB; + cell = &twl6040->cells[children]; cell->name = "twl6040-vibra"; + twl6040_vibra_rsrc[0].start = irq; + twl6040_vibra_rsrc[0].end = irq; + cell->resources = twl6040_vibra_rsrc; + cell->num_resources = ARRAY_SIZE(twl6040_vibra_rsrc); + cell->platform_data = pdata->vibra; cell->pdata_size = sizeof(*pdata->vibra); children++; -- cgit v1.2.3-70-g09d2 From d20e1d21fd0c398a8beb170beacf8e2ca839844c Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 4 Jul 2011 20:15:19 +0300 Subject: MFD: twl6040: Demand valid interrupt configuration In order to operate correctly twl6040 needs correct interrupt configuration. The slave drivers (vibra, and ASoC codec) will refuse to probe, if the interrupt configuration is not correct. In this way some checks can be removed from the code. Signed-off-by: Peter Ujfalusi Reviewed-by: Felipe Balbi Acked-by: Samuel Ortiz --- drivers/mfd/twl6040-core.c | 42 +++++++++++++++++++++--------------------- drivers/mfd/twl6040-irq.c | 16 +--------------- 2 files changed, 22 insertions(+), 36 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c index 471f4895fb9..f71bb147d11 100644 --- a/drivers/mfd/twl6040-core.c +++ b/drivers/mfd/twl6040-core.c @@ -459,6 +459,12 @@ static int __devinit twl6040_probe(struct platform_device *pdev) return -EINVAL; } + /* In order to operate correctly we need valid interrupt config */ + if (!pdata->naudint_irq || !pdata->irq_base) { + dev_err(&pdev->dev, "Invalid IRQ configuration\n"); + return -EINVAL; + } + twl6040 = kzalloc(sizeof(struct twl6040), GFP_KERNEL); if (!twl6040) return -ENOMEM; @@ -491,20 +497,18 @@ static int __devinit twl6040_probe(struct platform_device *pdev) if (twl6040->rev == TWL6040_REV_ES1_0) twl6040->audpwron = -EINVAL; - if (twl6040->irq) { - /* codec interrupt */ - ret = twl6040_irq_init(twl6040); - if (ret) - goto gpio2_err; - - ret = twl6040_request_irq(twl6040, TWL6040_IRQ_READY, - twl6040_naudint_handler, 0, - "twl6040_irq_ready", twl6040); - if (ret) { - dev_err(twl6040->dev, "READY IRQ request failed: %d\n", - ret); - goto irq_err; - } + /* codec interrupt */ + ret = twl6040_irq_init(twl6040); + if (ret) + goto gpio2_err; + + ret = twl6040_request_irq(twl6040, TWL6040_IRQ_READY, + twl6040_naudint_handler, 0, + "twl6040_irq_ready", twl6040); + if (ret) { + dev_err(twl6040->dev, "READY IRQ request failed: %d\n", + ret); + goto irq_err; } /* dual-access registers controlled by I2C only */ @@ -553,11 +557,9 @@ static int __devinit twl6040_probe(struct platform_device *pdev) return 0; mfd_err: - if (twl6040->irq) - twl6040_free_irq(twl6040, TWL6040_IRQ_READY, twl6040); + twl6040_free_irq(twl6040, TWL6040_IRQ_READY, twl6040); irq_err: - if (twl6040->irq) - twl6040_irq_exit(twl6040); + twl6040_irq_exit(twl6040); gpio2_err: if (gpio_is_valid(twl6040->audpwron)) gpio_free(twl6040->audpwron); @@ -579,9 +581,7 @@ static int __devexit twl6040_remove(struct platform_device *pdev) gpio_free(twl6040->audpwron); twl6040_free_irq(twl6040, TWL6040_IRQ_READY, twl6040); - - if (twl6040->irq) - twl6040_irq_exit(twl6040); + twl6040_irq_exit(twl6040); mfd_remove_devices(&pdev->dev); platform_set_drvdata(pdev, NULL); diff --git a/drivers/mfd/twl6040-irq.c b/drivers/mfd/twl6040-irq.c index 93805354152..b3f8ddaa28a 100644 --- a/drivers/mfd/twl6040-irq.c +++ b/drivers/mfd/twl6040-irq.c @@ -148,19 +148,6 @@ int twl6040_irq_init(struct twl6040 *twl6040) twl6040->irq_masks_cache = TWL6040_ALLINT_MSK; twl6040_reg_write(twl6040, TWL6040_REG_INTMR, TWL6040_ALLINT_MSK); - if (!twl6040->irq) { - dev_warn(twl6040->dev, - "no interrupt specified, no interrupts\n"); - twl6040->irq_base = 0; - return 0; - } - - if (!twl6040->irq_base) { - dev_err(twl6040->dev, - "no interrupt base specified, no interrupts\n"); - return 0; - } - /* Register them with genirq */ for (cur_irq = twl6040->irq_base; cur_irq < twl6040->irq_base + ARRAY_SIZE(twl6040_irqs); @@ -199,7 +186,6 @@ EXPORT_SYMBOL(twl6040_irq_init); void twl6040_irq_exit(struct twl6040 *twl6040) { - if (twl6040->irq) - free_irq(twl6040->irq, twl6040); + free_irq(twl6040->irq, twl6040); } EXPORT_SYMBOL(twl6040_irq_exit); -- cgit v1.2.3-70-g09d2 From 1b7c4725e2e926eaeb8657ac22992ec27fe03135 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 4 Jul 2011 20:16:23 +0300 Subject: MFD: twl6040: Remove wrapper for threaded irq request Remove the twl6040_request_irq/free_irq inline functions, and use direct calls instead in the core driver to register the threaded irq. Signed-off-by: Peter Ujfalusi Reviewed-by: Felipe Balbi Acked-by: Samuel Ortiz --- drivers/mfd/twl6040-core.c | 10 +++++----- include/linux/mfd/twl6040.h | 22 ---------------------- 2 files changed, 5 insertions(+), 27 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c index f71bb147d11..6843977f4e8 100644 --- a/drivers/mfd/twl6040-core.c +++ b/drivers/mfd/twl6040-core.c @@ -502,9 +502,9 @@ static int __devinit twl6040_probe(struct platform_device *pdev) if (ret) goto gpio2_err; - ret = twl6040_request_irq(twl6040, TWL6040_IRQ_READY, - twl6040_naudint_handler, 0, - "twl6040_irq_ready", twl6040); + ret = request_threaded_irq(twl6040->irq_base + TWL6040_IRQ_READY, + NULL, twl6040_naudint_handler, 0, + "twl6040_irq_ready", twl6040); if (ret) { dev_err(twl6040->dev, "READY IRQ request failed: %d\n", ret); @@ -557,7 +557,7 @@ static int __devinit twl6040_probe(struct platform_device *pdev) return 0; mfd_err: - twl6040_free_irq(twl6040, TWL6040_IRQ_READY, twl6040); + free_irq(twl6040->irq_base + TWL6040_IRQ_READY, twl6040); irq_err: twl6040_irq_exit(twl6040); gpio2_err: @@ -580,7 +580,7 @@ static int __devexit twl6040_remove(struct platform_device *pdev) if (gpio_is_valid(twl6040->audpwron)) gpio_free(twl6040->audpwron); - twl6040_free_irq(twl6040, TWL6040_IRQ_READY, twl6040); + free_irq(twl6040->irq_base + TWL6040_IRQ_READY, twl6040); twl6040_irq_exit(twl6040); mfd_remove_devices(&pdev->dev); diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h index c3c1de53dcf..df890a247c3 100644 --- a/include/linux/mfd/twl6040.h +++ b/include/linux/mfd/twl6040.h @@ -215,28 +215,6 @@ struct twl6040 { u8 irq_masks_cache; }; -static inline int twl6040_request_irq(struct twl6040 *twl6040, int irq, - irq_handler_t handler, - unsigned long irqflags, - const char *name, - void *data) -{ - if (!twl6040->irq_base) - return -EINVAL; - - return request_threaded_irq(twl6040->irq_base + irq, NULL, handler, - irqflags, name, data); -} - -static inline void twl6040_free_irq(struct twl6040 *twl6040, int irq, - void *data) -{ - if (!twl6040->irq_base) - return; - - free_irq(twl6040->irq_base + irq, data); -} - int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg); int twl6040_reg_write(struct twl6040 *twl6040, unsigned int reg, u8 val); -- cgit v1.2.3-70-g09d2 From cfb7a33bea259d2d72a64adcb3de28532170dc25 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 4 Jul 2011 10:28:28 +0300 Subject: MFD: twl6040: Remove enum for PLL tracking There is no need to have two different types for tracking the selected PLL. Use only the defines, when dealing with the PLLs. Signed-off-by: Peter Ujfalusi Acked-by: Samuel Ortiz --- drivers/mfd/twl6040-core.c | 26 +++++++++++++------------- include/linux/mfd/twl6040.h | 17 ++++++----------- 2 files changed, 19 insertions(+), 24 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c index 6843977f4e8..24d436c2fe4 100644 --- a/drivers/mfd/twl6040-core.c +++ b/drivers/mfd/twl6040-core.c @@ -270,7 +270,8 @@ int twl6040_power(struct twl6040 *twl6040, int on) goto out; } } - twl6040->pll = TWL6040_LPPLL_ID; + /* Default PLL configuration after power up */ + twl6040->pll = TWL6040_SYSCLK_SEL_LPPLL; twl6040->sysclk = 19200000; } else { /* already powered-down */ @@ -294,7 +295,6 @@ int twl6040_power(struct twl6040 *twl6040, int on) /* use manual power-down sequence */ twl6040_power_down(twl6040); } - twl6040->pll = TWL6040_NOPLL_ID; twl6040->sysclk = 0; } @@ -304,7 +304,7 @@ out: } EXPORT_SYMBOL(twl6040_power); -int twl6040_set_pll(struct twl6040 *twl6040, enum twl6040_pll_id id, +int twl6040_set_pll(struct twl6040 *twl6040, int pll_id, unsigned int freq_in, unsigned int freq_out) { u8 hppllctl, lppllctl; @@ -315,8 +315,8 @@ int twl6040_set_pll(struct twl6040 *twl6040, enum twl6040_pll_id id, hppllctl = twl6040_reg_read(twl6040, TWL6040_REG_HPPLLCTL); lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL); - switch (id) { - case TWL6040_LPPLL_ID: + switch (pll_id) { + case TWL6040_SYSCLK_SEL_LPPLL: /* low-power PLL divider */ switch (freq_out) { case 17640000: @@ -352,10 +352,8 @@ int twl6040_set_pll(struct twl6040 *twl6040, enum twl6040_pll_id id, ret = -EINVAL; goto pll_out; } - - twl6040->pll = TWL6040_LPPLL_ID; break; - case TWL6040_HPPLL_ID: + case TWL6040_SYSCLK_SEL_HPPLL: /* high-performance PLL can provide only 19.2 MHz */ if (freq_out != 19200000) { dev_err(&twl6040_dev->dev, @@ -406,16 +404,15 @@ int twl6040_set_pll(struct twl6040 *twl6040, enum twl6040_pll_id id, twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl); lppllctl &= ~TWL6040_LPLLENA; twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl); - - twl6040->pll = TWL6040_HPPLL_ID; break; default: - dev_err(&twl6040_dev->dev, "unknown pll id %d\n", id); + dev_err(&twl6040_dev->dev, "unknown pll id %d\n", pll_id); ret = -EINVAL; goto pll_out; } twl6040->sysclk = freq_out; + twl6040->pll = pll_id; pll_out: mutex_unlock(&twl6040->mutex); @@ -423,9 +420,12 @@ pll_out: } EXPORT_SYMBOL(twl6040_set_pll); -enum twl6040_pll_id twl6040_get_pll(struct twl6040 *twl6040) +int twl6040_get_pll(struct twl6040 *twl6040) { - return twl6040->pll; + if (twl6040->power_count) + return twl6040->pll; + else + return -ENODEV; } EXPORT_SYMBOL(twl6040_get_pll); diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h index df890a247c3..4c806f6d663 100644 --- a/include/linux/mfd/twl6040.h +++ b/include/linux/mfd/twl6040.h @@ -165,9 +165,6 @@ #define TWL6040_RESETSPLIT 0x04 #define TWL6040_INTCLRMODE 0x08 -#define TWL6040_SYSCLK_SEL_LPPLL 1 -#define TWL6040_SYSCLK_SEL_HPPLL 2 - /* STATUS (0x2E) fields */ #define TWL6040_PLUGCOMP 0x02 @@ -188,11 +185,9 @@ #define TWL6040_IRQ_VIB 4 #define TWL6040_IRQ_READY 5 -enum twl6040_pll_id { - TWL6040_NOPLL_ID, - TWL6040_LPPLL_ID, - TWL6040_HPPLL_ID, -}; +/* PLL selection */ +#define TWL6040_SYSCLK_SEL_LPPLL 0 +#define TWL6040_SYSCLK_SEL_HPPLL 1 struct twl6040 { struct device *dev; @@ -206,7 +201,7 @@ struct twl6040 { int power_count; int rev; - enum twl6040_pll_id pll; + int pll; unsigned int sysclk; unsigned int irq; @@ -223,9 +218,9 @@ int twl6040_set_bits(struct twl6040 *twl6040, unsigned int reg, int twl6040_clear_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask); int twl6040_power(struct twl6040 *twl6040, int on); -int twl6040_set_pll(struct twl6040 *twl6040, enum twl6040_pll_id id, +int twl6040_set_pll(struct twl6040 *twl6040, int pll_id, unsigned int freq_in, unsigned int freq_out); -enum twl6040_pll_id twl6040_get_pll(struct twl6040 *twl6040); +int twl6040_get_pll(struct twl6040 *twl6040); unsigned int twl6040_get_sysclk(struct twl6040 *twl6040); int twl6040_irq_init(struct twl6040 *twl6040); void twl6040_irq_exit(struct twl6040 *twl6040); -- cgit v1.2.3-70-g09d2 From bb4ce9708785f40849f1a64931e6cc3b26171201 Mon Sep 17 00:00:00 2001 From: Donggeun Kim Date: Fri, 24 Jun 2011 19:04:18 +0900 Subject: power_supply: Add charger driver for MAX8998/LP3974 This patch supports power supply APIs for MAX8998/LP3974. Signed-off-by: Donggeun Kim Signed-off-by: MyungJoo Ham Signed-off-by: KyungMin Park Acked-by: Samuel Ortiz Signed-off-by: Anton Vorontsov --- drivers/mfd/max8998.c | 2 + drivers/power/Kconfig | 7 ++ drivers/power/Makefile | 1 + drivers/power/max8998_charger.c | 218 ++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/max8998.h | 12 +++ 5 files changed, 240 insertions(+) create mode 100644 drivers/power/max8998_charger.c (limited to 'drivers/mfd') diff --git a/drivers/mfd/max8998.c b/drivers/mfd/max8998.c index 9ec7570f5b8..de4096aee24 100644 --- a/drivers/mfd/max8998.c +++ b/drivers/mfd/max8998.c @@ -39,6 +39,8 @@ static struct mfd_cell max8998_devs[] = { .name = "max8998-pmic", }, { .name = "max8998-rtc", + }, { + .name = "max8998-battery", }, }; diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index f4f1a31d46a..fddc392369e 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -235,4 +235,11 @@ config CHARGER_MAX8997 Say Y to enable support for the battery charger control sysfs and platform data of MAX8997/LP3974 PMICs. +config CHARGER_MAX8998 + tristate "Maxim MAX8998/LP3974 PMIC battery charger driver" + depends on MFD_MAX8998 && REGULATOR_MAX8998 + help + Say Y to enable support for the battery charger control sysfs and + platform data of MAX8998/LP3974 PMICs. + endif # POWER_SUPPLY diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 39793ef50cd..a18e899b1f4 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -36,3 +36,4 @@ obj-$(CONFIG_CHARGER_MAX8903) += max8903_charger.o obj-$(CONFIG_CHARGER_TWL4030) += twl4030_charger.o obj-$(CONFIG_CHARGER_GPIO) += gpio-charger.o obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o +obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o diff --git a/drivers/power/max8998_charger.c b/drivers/power/max8998_charger.c new file mode 100644 index 00000000000..cc21fa2120b --- /dev/null +++ b/drivers/power/max8998_charger.c @@ -0,0 +1,218 @@ +/* + * max8998_charger.c - Power supply consumer driver for the Maxim 8998/LP3974 + * + * Copyright (C) 2009-2010 Samsung Electronics + * MyungJoo Ham + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +struct max8998_battery_data { + struct device *dev; + struct max8998_dev *iodev; + struct power_supply battery; +}; + +static enum power_supply_property max8998_battery_props[] = { + POWER_SUPPLY_PROP_PRESENT, /* the presence of battery */ + POWER_SUPPLY_PROP_ONLINE, /* charger is active or not */ +}; + +/* Note that the charger control is done by a current regulator "CHARGER" */ +static int max8998_battery_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct max8998_battery_data *max8998 = container_of(psy, + struct max8998_battery_data, battery); + struct i2c_client *i2c = max8998->iodev->i2c; + int ret; + u8 reg; + + switch (psp) { + case POWER_SUPPLY_PROP_PRESENT: + ret = max8998_read_reg(i2c, MAX8998_REG_STATUS2, ®); + if (ret) + return ret; + if (reg & (1 << 4)) + val->intval = 0; + else + val->intval = 1; + break; + case POWER_SUPPLY_PROP_ONLINE: + ret = max8998_read_reg(i2c, MAX8998_REG_STATUS2, ®); + if (ret) + return ret; + if (reg & (1 << 3)) + val->intval = 0; + else + val->intval = 1; + break; + default: + return -EINVAL; + } + + return 0; +} + +static __devinit int max8998_battery_probe(struct platform_device *pdev) +{ + struct max8998_dev *iodev = dev_get_drvdata(pdev->dev.parent); + struct max8998_platform_data *pdata = dev_get_platdata(iodev->dev); + struct max8998_battery_data *max8998; + struct i2c_client *i2c; + int ret = 0; + + if (!pdata) { + dev_err(pdev->dev.parent, "No platform init data supplied\n"); + return -ENODEV; + } + + max8998 = kzalloc(sizeof(struct max8998_battery_data), GFP_KERNEL); + if (!max8998) + return -ENOMEM; + + max8998->dev = &pdev->dev; + max8998->iodev = iodev; + platform_set_drvdata(pdev, max8998); + i2c = max8998->iodev->i2c; + + /* Setup "End of Charge" */ + /* If EOC value equals 0, + * remain value set from bootloader or default value */ + if (pdata->eoc >= 10 && pdata->eoc <= 45) { + max8998_update_reg(i2c, MAX8998_REG_CHGR1, + (pdata->eoc / 5 - 2) << 5, 0x7 << 5); + } else if (pdata->eoc == 0) { + dev_dbg(max8998->dev, + "EOC value not set: leave it unchanged.\n"); + } else { + dev_err(max8998->dev, "Invalid EOC value\n"); + ret = -EINVAL; + goto err; + } + + /* Setup Charge Restart Level */ + switch (pdata->restart) { + case 100: + max8998_update_reg(i2c, MAX8998_REG_CHGR1, 0x1 << 3, 0x3 << 3); + break; + case 150: + max8998_update_reg(i2c, MAX8998_REG_CHGR1, 0x0 << 3, 0x3 << 3); + break; + case 200: + max8998_update_reg(i2c, MAX8998_REG_CHGR1, 0x2 << 3, 0x3 << 3); + break; + case -1: + max8998_update_reg(i2c, MAX8998_REG_CHGR1, 0x3 << 3, 0x3 << 3); + break; + case 0: + dev_dbg(max8998->dev, + "Restart Level not set: leave it unchanged.\n"); + break; + default: + dev_err(max8998->dev, "Invalid Restart Level\n"); + ret = -EINVAL; + goto err; + } + + /* Setup Charge Full Timeout */ + switch (pdata->timeout) { + case 5: + max8998_update_reg(i2c, MAX8998_REG_CHGR2, 0x0 << 4, 0x3 << 4); + break; + case 6: + max8998_update_reg(i2c, MAX8998_REG_CHGR2, 0x1 << 4, 0x3 << 4); + break; + case 7: + max8998_update_reg(i2c, MAX8998_REG_CHGR2, 0x2 << 4, 0x3 << 4); + break; + case -1: + max8998_update_reg(i2c, MAX8998_REG_CHGR2, 0x3 << 4, 0x3 << 4); + break; + case 0: + dev_dbg(max8998->dev, + "Full Timeout not set: leave it unchanged.\n"); + default: + dev_err(max8998->dev, "Invalid Full Timeout value\n"); + ret = -EINVAL; + goto err; + } + + max8998->battery.name = "max8998_pmic"; + max8998->battery.type = POWER_SUPPLY_TYPE_BATTERY; + max8998->battery.get_property = max8998_battery_get_property; + max8998->battery.properties = max8998_battery_props; + max8998->battery.num_properties = ARRAY_SIZE(max8998_battery_props); + + ret = power_supply_register(max8998->dev, &max8998->battery); + if (ret) { + dev_err(max8998->dev, "failed: power supply register\n"); + goto err; + } + + return 0; +err: + kfree(max8998); + return ret; +} + +static int __devexit max8998_battery_remove(struct platform_device *pdev) +{ + struct max8998_battery_data *max8998 = platform_get_drvdata(pdev); + + power_supply_unregister(&max8998->battery); + kfree(max8998); + + return 0; +} + +static const struct platform_device_id max8998_battery_id[] = { + { "max8998-battery", TYPE_MAX8998 }, +}; + +static struct platform_driver max8998_battery_driver = { + .driver = { + .name = "max8998-battery", + .owner = THIS_MODULE, + }, + .probe = max8998_battery_probe, + .remove = __devexit_p(max8998_battery_remove), + .id_table = max8998_battery_id, +}; + +static int __init max8998_battery_init(void) +{ + return platform_driver_register(&max8998_battery_driver); +} +module_init(max8998_battery_init); + +static void __exit max8998_battery_cleanup(void) +{ + platform_driver_unregister(&max8998_battery_driver); +} +module_exit(max8998_battery_cleanup); + +MODULE_DESCRIPTION("MAXIM 8998 battery control driver"); +MODULE_AUTHOR("MyungJoo Ham "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:max8998-battery"); diff --git a/include/linux/mfd/max8998.h b/include/linux/mfd/max8998.h index 61daa167b57..f4f0dfa4698 100644 --- a/include/linux/mfd/max8998.h +++ b/include/linux/mfd/max8998.h @@ -87,6 +87,15 @@ struct max8998_regulator_data { * @wakeup: Allow to wake up from suspend * @rtc_delay: LP3974 RTC chip bug that requires delay after a register * write before reading it. + * @eoc: End of Charge Level in percent: 10% ~ 45% by 5% step + * If it equals 0, leave it unchanged. + * Otherwise, it is a invalid value. + * @restart: Restart Level in mV: 100, 150, 200, and -1 for disable. + * If it equals 0, leave it unchanged. + * Otherwise, it is a invalid value. + * @timeout: Full Timeout in hours: 5, 6, 7, and -1 for disable. + * If it equals 0, leave it unchanged. + * Otherwise, leave it unchanged. */ struct max8998_platform_data { struct max8998_regulator_data *regulators; @@ -107,6 +116,9 @@ struct max8998_platform_data { int buck2_default_idx; bool wakeup; bool rtc_delay; + int eoc; + int restart; + int timeout; }; #endif /* __LINUX_MFD_MAX8998_H */ -- cgit v1.2.3-70-g09d2 From 9cd49719fda38613e9d7c712b11a54ea4ea005dc Mon Sep 17 00:00:00 2001 From: Richard Röjfors Date: Fri, 10 Jun 2011 11:48:48 -0300 Subject: [media] radio-timb: Simplified platform data MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch simplifies the platform data slightly, by removing unused elements. Signed-off-by: Richard Röjfors Signed-off-by: Mauro Carvalho Chehab --- drivers/mfd/timberdale.c | 8 ++------ include/media/timb_radio.h | 9 ++------- 2 files changed, 4 insertions(+), 13 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/timberdale.c b/drivers/mfd/timberdale.c index 69272e4e345..696879e2eef 100644 --- a/drivers/mfd/timberdale.c +++ b/drivers/mfd/timberdale.c @@ -287,12 +287,8 @@ static __devinitdata struct i2c_board_info timberdale_saa7706_i2c_board_info = { static __devinitdata struct timb_radio_platform_data timberdale_radio_platform_data = { .i2c_adapter = 0, - .tuner = { - .info = &timberdale_tef6868_i2c_board_info - }, - .dsp = { - .info = &timberdale_saa7706_i2c_board_info - } + .tuner = &timberdale_tef6868_i2c_board_info, + .dsp = &timberdale_saa7706_i2c_board_info }; static const __devinitconst struct resource timberdale_video_resources[] = { diff --git a/include/media/timb_radio.h b/include/media/timb_radio.h index a59a84854dc..a40a6a348d2 100644 --- a/include/media/timb_radio.h +++ b/include/media/timb_radio.h @@ -23,13 +23,8 @@ struct timb_radio_platform_data { int i2c_adapter; /* I2C adapter where the tuner and dsp are attached */ - struct { - struct i2c_board_info *info; - } tuner; - struct { - const char *module_name; - struct i2c_board_info *info; - } dsp; + struct i2c_board_info *tuner; + struct i2c_board_info *dsp; }; #endif -- cgit v1.2.3-70-g09d2 From ca7a71824ac957b1b9d3322656c05aad38d7275c Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 2 Jun 2011 19:18:47 +0100 Subject: mfd: Fix bus lock interaction for WM831x IRQ set_type() operation The WM831x IRQ set_type() operation is doing a direct register write when called but since set_type() is called with the bus lock held this isn't legal and could cause deadlocks in the IRQ core. Fix this by posting the updates into an array and syncing in the bus_sync_unlock() callback. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm831x-irq.c | 24 ++++++++++++++++++------ include/linux/mfd/wm831x/core.h | 4 ++++ 2 files changed, 22 insertions(+), 6 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c index 42b928ec891..b23d8d5ee96 100644 --- a/drivers/mfd/wm831x-irq.c +++ b/drivers/mfd/wm831x-irq.c @@ -348,6 +348,15 @@ static void wm831x_irq_sync_unlock(struct irq_data *data) struct wm831x *wm831x = irq_data_get_irq_chip_data(data); int i; + for (i = 0; i < ARRAY_SIZE(wm831x->gpio_update); i++) { + if (wm831x->gpio_update[i]) { + wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + i, + WM831X_GPN_INT_MODE | WM831X_GPN_POL, + wm831x->gpio_update[i]); + wm831x->gpio_update[i] = 0; + } + } + for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks_cur); i++) { /* If there's been a change in the mask write it back * to the hardware. */ @@ -387,7 +396,7 @@ static void wm831x_irq_disable(struct irq_data *data) static int wm831x_irq_set_type(struct irq_data *data, unsigned int type) { struct wm831x *wm831x = irq_data_get_irq_chip_data(data); - int val, irq; + int irq; irq = data->irq - wm831x->irq_base; @@ -399,22 +408,25 @@ static int wm831x_irq_set_type(struct irq_data *data, unsigned int type) return -EINVAL; } + /* We set the high bit to flag that we need an update; don't + * do the update here as we can be called with the bus lock + * held. + */ switch (type) { case IRQ_TYPE_EDGE_BOTH: - val = WM831X_GPN_INT_MODE; + wm831x->gpio_update[irq] = 0x10000 | WM831X_GPN_INT_MODE; break; case IRQ_TYPE_EDGE_RISING: - val = WM831X_GPN_POL; + wm831x->gpio_update[irq] = 0x10000 | WM831X_GPN_POL; break; case IRQ_TYPE_EDGE_FALLING: - val = 0; + wm831x->gpio_update[irq] = 0x10000; break; default: return -EINVAL; } - return wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + irq, - WM831X_GPN_INT_MODE | WM831X_GPN_POL, val); + return 0; } static struct irq_chip wm831x_irq_chip = { diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h index 0d515ee1c24..ebead1c401a 100644 --- a/include/linux/mfd/wm831x/core.h +++ b/include/linux/mfd/wm831x/core.h @@ -237,6 +237,7 @@ struct regulator_dev; #define WM831X_NUM_IRQ_REGS 5 +#define WM831X_NUM_GPIO_REGS 16 enum wm831x_parent { WM8310 = 0x8310, @@ -272,6 +273,9 @@ struct wm831x { int num_gpio; + /* Used by the interrupt controller code to post writes */ + int gpio_update[WM831X_NUM_GPIO_REGS]; + struct mutex auxadc_lock; struct completion auxadc_done; -- cgit v1.2.3-70-g09d2 From eb503dc16b04d07a42a37892da73c74461fd06da Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 2 Jun 2011 19:18:48 +0100 Subject: mfd: Implement support for multiple WM831x devices Systems using this functionality will be uncommon. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm831x-core.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c index 265f75fc6a2..04994b23bb6 100644 --- a/drivers/mfd/wm831x-core.c +++ b/drivers/mfd/wm831x-core.c @@ -1440,7 +1440,7 @@ static struct mfd_cell backlight_devs[] = { int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) { struct wm831x_pdata *pdata = wm831x->dev->platform_data; - int rev; + int rev, wm831x_num; enum wm831x_parent parent; int ret, i; @@ -1592,6 +1592,12 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) } } + /* Multiply by 10 as we have many subdevices of the same type */ + if (pdata && pdata->wm831x_num) + wm831x_num = pdata->wm831x_num * 10; + else + wm831x_num = -1; + ret = wm831x_irq_init(wm831x, irq); if (ret != 0) goto err; @@ -1609,19 +1615,19 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) /* The core device is up, instantiate the subdevices. */ switch (parent) { case WM8310: - ret = mfd_add_devices(wm831x->dev, -1, + ret = mfd_add_devices(wm831x->dev, wm831x_num, wm8310_devs, ARRAY_SIZE(wm8310_devs), NULL, wm831x->irq_base); break; case WM8311: - ret = mfd_add_devices(wm831x->dev, -1, + ret = mfd_add_devices(wm831x->dev, wm831x_num, wm8311_devs, ARRAY_SIZE(wm8311_devs), NULL, wm831x->irq_base); break; case WM8312: - ret = mfd_add_devices(wm831x->dev, -1, + ret = mfd_add_devices(wm831x->dev, wm831x_num, wm8312_devs, ARRAY_SIZE(wm8312_devs), NULL, wm831x->irq_base); break; @@ -1630,7 +1636,7 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) case WM8321: case WM8325: case WM8326: - ret = mfd_add_devices(wm831x->dev, -1, + ret = mfd_add_devices(wm831x->dev, wm831x_num, wm8320_devs, ARRAY_SIZE(wm8320_devs), NULL, wm831x->irq_base); break; @@ -1647,7 +1653,7 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) if (pdata && pdata->backlight) { /* Treat errors as non-critical */ - ret = mfd_add_devices(wm831x->dev, -1, backlight_devs, + ret = mfd_add_devices(wm831x->dev, wm831x_num, backlight_devs, ARRAY_SIZE(backlight_devs), NULL, wm831x->irq_base); if (ret < 0) -- cgit v1.2.3-70-g09d2 From 266a5e02fe2690637b2318c9fc5c3513937128f4 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 2 Jun 2011 19:18:49 +0100 Subject: mfd: Allow touchscreen to be disabled on wm831x devices Allow platform data to flag the touchscreen as disabled so that if the touch driver is built in we don't end up causing lots of work by spuriously detecting touchscreen activity on systems where it isn't in use. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm831x-core.c | 27 +++++++++++++++++---------- include/linux/mfd/wm831x/pdata.h | 3 +++ 2 files changed, 20 insertions(+), 10 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c index 04994b23bb6..ff57a167475 100644 --- a/drivers/mfd/wm831x-core.c +++ b/drivers/mfd/wm831x-core.c @@ -1124,11 +1124,6 @@ static struct mfd_cell wm8311_devs[] = { .num_resources = ARRAY_SIZE(wm831x_status2_resources), .resources = wm831x_status2_resources, }, - { - .name = "wm831x-touch", - .num_resources = ARRAY_SIZE(wm831x_touch_resources), - .resources = wm831x_touch_resources, - }, { .name = "wm831x-watchdog", .num_resources = ARRAY_SIZE(wm831x_wdt_resources), @@ -1285,11 +1280,6 @@ static struct mfd_cell wm8312_devs[] = { .num_resources = ARRAY_SIZE(wm831x_status2_resources), .resources = wm831x_status2_resources, }, - { - .name = "wm831x-touch", - .num_resources = ARRAY_SIZE(wm831x_touch_resources), - .resources = wm831x_touch_resources, - }, { .name = "wm831x-watchdog", .num_resources = ARRAY_SIZE(wm831x_wdt_resources), @@ -1428,6 +1418,15 @@ static struct mfd_cell wm8320_devs[] = { }, }; +static struct mfd_cell touch_devs[] = { + { + .name = "wm831x-touch", + .num_resources = ARRAY_SIZE(wm831x_touch_resources), + .resources = wm831x_touch_resources, + }, +}; + + static struct mfd_cell backlight_devs[] = { { .name = "wm831x-backlight", @@ -1624,12 +1623,20 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) ret = mfd_add_devices(wm831x->dev, wm831x_num, wm8311_devs, ARRAY_SIZE(wm8311_devs), NULL, wm831x->irq_base); + if (!pdata || !pdata->disable_touch) + mfd_add_devices(wm831x->dev, wm831x_num, + touch_devs, ARRAY_SIZE(touch_devs), + NULL, wm831x->irq_base); break; case WM8312: ret = mfd_add_devices(wm831x->dev, wm831x_num, wm8312_devs, ARRAY_SIZE(wm8312_devs), NULL, wm831x->irq_base); + if (!pdata || !pdata->disable_touch) + mfd_add_devices(wm831x->dev, wm831x_num, + touch_devs, ARRAY_SIZE(touch_devs), + NULL, wm831x->irq_base); break; case WM8320: diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h index ff42d700293..0ba24599fe5 100644 --- a/include/linux/mfd/wm831x/pdata.h +++ b/include/linux/mfd/wm831x/pdata.h @@ -120,6 +120,9 @@ struct wm831x_pdata { /** Put the /IRQ line into CMOS mode */ bool irq_cmos; + /** Disable the touchscreen */ + bool disable_touch; + int irq_base; int gpio_base; int gpio_defaults[WM831X_GPIO_NUM]; -- cgit v1.2.3-70-g09d2 From b9d03d999b46f0897492f3aac3e794312e5282db Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 2 Jun 2011 19:18:50 +0100 Subject: mfd: Only register wm831x RTC device if the 32.768kHz crystal is enabled The RTC uses the 32.768kHz crystal so if it's not enabled (and it can only be enabled via OTP or InstantConfig, not runtime software) the RTC can't function. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm831x-core.c | 48 +++++++++++++++++++++++++++-------------------- 1 file changed, 28 insertions(+), 20 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c index ff57a167475..58f033b57ef 100644 --- a/drivers/mfd/wm831x-core.c +++ b/drivers/mfd/wm831x-core.c @@ -975,11 +975,6 @@ static struct mfd_cell wm8310_devs[] = { .num_resources = ARRAY_SIZE(wm831x_power_resources), .resources = wm831x_power_resources, }, - { - .name = "wm831x-rtc", - .num_resources = ARRAY_SIZE(wm831x_rtc_resources), - .resources = wm831x_rtc_resources, - }, { .name = "wm831x-status", .id = 1, @@ -1107,11 +1102,6 @@ static struct mfd_cell wm8311_devs[] = { .num_resources = ARRAY_SIZE(wm831x_power_resources), .resources = wm831x_power_resources, }, - { - .name = "wm831x-rtc", - .num_resources = ARRAY_SIZE(wm831x_rtc_resources), - .resources = wm831x_rtc_resources, - }, { .name = "wm831x-status", .id = 1, @@ -1263,11 +1253,6 @@ static struct mfd_cell wm8312_devs[] = { .num_resources = ARRAY_SIZE(wm831x_power_resources), .resources = wm831x_power_resources, }, - { - .name = "wm831x-rtc", - .num_resources = ARRAY_SIZE(wm831x_rtc_resources), - .resources = wm831x_rtc_resources, - }, { .name = "wm831x-status", .id = 1, @@ -1394,11 +1379,6 @@ static struct mfd_cell wm8320_devs[] = { .num_resources = ARRAY_SIZE(wm831x_on_resources), .resources = wm831x_on_resources, }, - { - .name = "wm831x-rtc", - .num_resources = ARRAY_SIZE(wm831x_rtc_resources), - .resources = wm831x_rtc_resources, - }, { .name = "wm831x-status", .id = 1, @@ -1426,6 +1406,13 @@ static struct mfd_cell touch_devs[] = { }, }; +static struct mfd_cell rtc_devs[] = { + { + .name = "wm831x-rtc", + .num_resources = ARRAY_SIZE(wm831x_rtc_resources), + .resources = wm831x_rtc_resources, + }, +}; static struct mfd_cell backlight_devs[] = { { @@ -1658,6 +1645,27 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) goto err_irq; } + /* The RTC can only be used if the 32.768kHz crystal is + * enabled; this can't be controlled by software at runtime. + */ + ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_2); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to read clock status: %d\n", ret); + goto err_irq; + } + + if (ret & WM831X_XTAL_ENA) { + ret = mfd_add_devices(wm831x->dev, wm831x_num, + rtc_devs, ARRAY_SIZE(rtc_devs), + NULL, wm831x->irq_base); + if (ret != 0) { + dev_err(wm831x->dev, "Failed to add RTC: %d\n", ret); + goto err_irq; + } + } else { + dev_info(wm831x->dev, "32.768kHz clock disabled, no RTC\n"); + } + if (pdata && pdata->backlight) { /* Treat errors as non-critical */ ret = mfd_add_devices(wm831x->dev, wm831x_num, backlight_devs, -- cgit v1.2.3-70-g09d2 From 5c05a8d1f0105ada3cb04be5b70686fc6b272619 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 2 Jun 2011 19:18:51 +0100 Subject: mfd: Support dynamic allocation of IRQ range for wm831x Use irq_allocate_desc() to get the IRQ range, which turns into a noop on non-sparse systems. Since all existing users are non-sparse there should be no compatibility issues. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm831x-irq.c | 18 +++++++++++++----- include/linux/mfd/wm831x/core.h | 2 +- 2 files changed, 14 insertions(+), 6 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c index b23d8d5ee96..1808deb8083 100644 --- a/drivers/mfd/wm831x-irq.c +++ b/drivers/mfd/wm831x-irq.c @@ -527,13 +527,22 @@ int wm831x_irq_init(struct wm831x *wm831x, int irq) 0xffff); } - if (!pdata || !pdata->irq_base) { - dev_err(wm831x->dev, - "No interrupt base specified, no interrupts\n"); + /* Try to dynamically allocate IRQs if no base is specified */ + if (!pdata || !pdata->irq_base) + wm831x->irq_base = -1; + else + wm831x->irq_base = pdata->irq_base; + + wm831x->irq_base = irq_alloc_descs(wm831x->irq_base, 0, + WM831X_NUM_IRQS, 0); + if (wm831x->irq_base < 0) { + dev_warn(wm831x->dev, "Failed to allocate IRQs: %d\n", + wm831x->irq_base); + wm831x->irq_base = 0; return 0; } - if (pdata->irq_cmos) + if (pdata && pdata->irq_cmos) i = 0; else i = WM831X_IRQ_OD; @@ -553,7 +562,6 @@ int wm831x_irq_init(struct wm831x *wm831x, int irq) } wm831x->irq = irq; - wm831x->irq_base = pdata->irq_base; /* Register them with genirq */ for (cur_irq = wm831x->irq_base; diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h index ebead1c401a..9564cf31527 100644 --- a/include/linux/mfd/wm831x/core.h +++ b/include/linux/mfd/wm831x/core.h @@ -262,7 +262,7 @@ struct wm831x { int irq; /* Our chip IRQ */ struct mutex irq_lock; - unsigned int irq_base; + int irq_base; int irq_masks_cur[WM831X_NUM_IRQ_REGS]; /* Currently active value */ int irq_masks_cache[WM831X_NUM_IRQ_REGS]; /* Cached hardware value */ -- cgit v1.2.3-70-g09d2 From c1a82780b41e78f31636c49279ce940afe60a453 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 2 Jun 2011 19:18:52 +0100 Subject: mfd: Read wm831x AUXADC conversion results before acknowledging interrupt Ensure that there's no possibility of loosing an AUXADC interrupt by reading the conversion result in the IRQ handler when using interrupts. Otherwise it's possible that under very heavy load a new conversion could be initiated before the acknowledgement for a previous interrupt has happened. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm831x-core.c | 47 +++++++++++++++++++++++++++-------------- include/linux/mfd/wm831x/core.h | 1 + 2 files changed, 32 insertions(+), 16 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c index 58f033b57ef..480abc18f9f 100644 --- a/drivers/mfd/wm831x-core.c +++ b/drivers/mfd/wm831x-core.c @@ -376,6 +376,16 @@ int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input) goto disable; } } + + ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA); + if (ret < 0) { + dev_err(wm831x->dev, + "Failed to read AUXADC data: %d\n", ret); + goto disable; + } + + wm831x->auxadc_data = ret; + } else { /* If we are using interrupts then wait for the * interrupt to complete. Use an extremely long @@ -390,23 +400,18 @@ int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input) } } - ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA); - if (ret < 0) { - dev_err(wm831x->dev, "Failed to read AUXADC data: %d\n", ret); + src = ((wm831x->auxadc_data & WM831X_AUX_DATA_SRC_MASK) + >> WM831X_AUX_DATA_SRC_SHIFT) - 1; + + if (src == 14) + src = WM831X_AUX_CAL; + + if (src != input) { + dev_err(wm831x->dev, "Data from source %d not %d\n", + src, input); + ret = -EINVAL; } else { - src = ((ret & WM831X_AUX_DATA_SRC_MASK) - >> WM831X_AUX_DATA_SRC_SHIFT) - 1; - - if (src == 14) - src = WM831X_AUX_CAL; - - if (src != input) { - dev_err(wm831x->dev, "Data from source %d not %d\n", - src, input); - ret = -EINVAL; - } else { - ret &= WM831X_AUX_DATA_MASK; - } + ret = wm831x->auxadc_data & WM831X_AUX_DATA_MASK; } disable: @@ -420,6 +425,16 @@ EXPORT_SYMBOL_GPL(wm831x_auxadc_read); static irqreturn_t wm831x_auxadc_irq(int irq, void *irq_data) { struct wm831x *wm831x = irq_data; + int ret; + + ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA); + if (ret < 0) { + dev_err(wm831x->dev, + "Failed to read AUXADC data: %d\n", ret); + wm831x->auxadc_data = 0xffff; + } else { + wm831x->auxadc_data = ret; + } complete(&wm831x->auxadc_done); diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h index 9564cf31527..592e4fd6ab3 100644 --- a/include/linux/mfd/wm831x/core.h +++ b/include/linux/mfd/wm831x/core.h @@ -278,6 +278,7 @@ struct wm831x { struct mutex auxadc_lock; struct completion auxadc_done; + u16 auxadc_data; /* The WM831x has a security key blocking access to certain * registers. The mutex is taken by the accessors for locking -- cgit v1.2.3-70-g09d2 From e69b6de181167a132eee7c38c7e4b47dea3d8e49 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 2 Jun 2011 19:18:53 +0100 Subject: mfd: Refactor wm831x AUXADC handling into a separate file In preparation for some additional work on the wm831x AUXADC code move the support into a separate file. This is a simple code motion patch, there should be no functional changes. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/Makefile | 1 + drivers/mfd/wm831x-auxadc.c | 199 ++++++++++++++++++++++++++++++++++++++++++++ drivers/mfd/wm831x-core.c | 167 +------------------------------------ 3 files changed, 201 insertions(+), 166 deletions(-) create mode 100644 drivers/mfd/wm831x-auxadc.c (limited to 'drivers/mfd') diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 22a280fcb70..0889f53c8b0 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o tmio_core.o obj-$(CONFIG_MFD_WM8400) += wm8400-core.o wm831x-objs := wm831x-core.o wm831x-irq.o wm831x-otp.o +wm831x-objs += wm831x-auxadc.o obj-$(CONFIG_MFD_WM831X) += wm831x.o obj-$(CONFIG_MFD_WM831X_I2C) += wm831x-i2c.o obj-$(CONFIG_MFD_WM831X_SPI) += wm831x-spi.o diff --git a/drivers/mfd/wm831x-auxadc.c b/drivers/mfd/wm831x-auxadc.c new file mode 100644 index 00000000000..2fc9531b243 --- /dev/null +++ b/drivers/mfd/wm831x-auxadc.c @@ -0,0 +1,199 @@ +/* + * wm831x-auxadc.c -- AUXADC for Wolfson WM831x PMICs + * + * Copyright 2009-2011 Wolfson Microelectronics PLC. + * + * Author: Mark Brown + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +/** + * wm831x_auxadc_read: Read a value from the WM831x AUXADC + * + * @wm831x: Device to read from. + * @input: AUXADC input to read. + */ +int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input) +{ + int ret, src, irq_masked, timeout; + + /* Are we using the interrupt? */ + irq_masked = wm831x_reg_read(wm831x, WM831X_INTERRUPT_STATUS_1_MASK); + irq_masked &= WM831X_AUXADC_DATA_EINT; + + mutex_lock(&wm831x->auxadc_lock); + + ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, + WM831X_AUX_ENA, WM831X_AUX_ENA); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to enable AUXADC: %d\n", ret); + goto out; + } + + /* We force a single source at present */ + src = input; + ret = wm831x_reg_write(wm831x, WM831X_AUXADC_SOURCE, + 1 << src); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to set AUXADC source: %d\n", ret); + goto out; + } + + /* Clear any notification from a very late arriving interrupt */ + try_wait_for_completion(&wm831x->auxadc_done); + + ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, + WM831X_AUX_CVT_ENA, WM831X_AUX_CVT_ENA); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to start AUXADC: %d\n", ret); + goto disable; + } + + if (irq_masked) { + /* If we're not using interrupts then poll the + * interrupt status register */ + timeout = 5; + while (timeout) { + msleep(1); + + ret = wm831x_reg_read(wm831x, + WM831X_INTERRUPT_STATUS_1); + if (ret < 0) { + dev_err(wm831x->dev, + "ISR 1 read failed: %d\n", ret); + goto disable; + } + + /* Did it complete? */ + if (ret & WM831X_AUXADC_DATA_EINT) { + wm831x_reg_write(wm831x, + WM831X_INTERRUPT_STATUS_1, + WM831X_AUXADC_DATA_EINT); + break; + } else { + dev_err(wm831x->dev, + "AUXADC conversion timeout\n"); + ret = -EBUSY; + goto disable; + } + } + + ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA); + if (ret < 0) { + dev_err(wm831x->dev, + "Failed to read AUXADC data: %d\n", ret); + goto disable; + } + + wm831x->auxadc_data = ret; + + } else { + /* If we are using interrupts then wait for the + * interrupt to complete. Use an extremely long + * timeout to handle situations with heavy load where + * the notification of the interrupt may be delayed by + * threaded IRQ handling. */ + if (!wait_for_completion_timeout(&wm831x->auxadc_done, + msecs_to_jiffies(500))) { + dev_err(wm831x->dev, "Timed out waiting for AUXADC\n"); + ret = -EBUSY; + goto disable; + } + } + + src = ((wm831x->auxadc_data & WM831X_AUX_DATA_SRC_MASK) + >> WM831X_AUX_DATA_SRC_SHIFT) - 1; + + if (src == 14) + src = WM831X_AUX_CAL; + + if (src != input) { + dev_err(wm831x->dev, "Data from source %d not %d\n", + src, input); + ret = -EINVAL; + } else { + ret = wm831x->auxadc_data & WM831X_AUX_DATA_MASK; + } + +disable: + wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, WM831X_AUX_ENA, 0); +out: + mutex_unlock(&wm831x->auxadc_lock); + return ret; +} +EXPORT_SYMBOL_GPL(wm831x_auxadc_read); + +static irqreturn_t wm831x_auxadc_irq(int irq, void *irq_data) +{ + struct wm831x *wm831x = irq_data; + int ret; + + ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA); + if (ret < 0) { + dev_err(wm831x->dev, + "Failed to read AUXADC data: %d\n", ret); + wm831x->auxadc_data = 0xffff; + } else { + wm831x->auxadc_data = ret; + } + + complete(&wm831x->auxadc_done); + + return IRQ_HANDLED; +} + +/** + * wm831x_auxadc_read_uv: Read a voltage from the WM831x AUXADC + * + * @wm831x: Device to read from. + * @input: AUXADC input to read. + */ +int wm831x_auxadc_read_uv(struct wm831x *wm831x, enum wm831x_auxadc input) +{ + int ret; + + ret = wm831x_auxadc_read(wm831x, input); + if (ret < 0) + return ret; + + ret *= 1465; + + return ret; +} +EXPORT_SYMBOL_GPL(wm831x_auxadc_read_uv); + +void wm831x_auxadc_init(struct wm831x *wm831x) +{ + int ret; + + mutex_init(&wm831x->auxadc_lock); + init_completion(&wm831x->auxadc_done); + + if (wm831x->irq_base) { + ret = request_threaded_irq(wm831x->irq_base + + WM831X_IRQ_AUXADC_DATA, + NULL, wm831x_auxadc_irq, 0, + "auxadc", wm831x); + if (ret < 0) + dev_err(wm831x->dev, "AUXADC IRQ request failed: %d\n", + ret); + } +} diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c index 480abc18f9f..772fe584f3b 100644 --- a/drivers/mfd/wm831x-core.c +++ b/drivers/mfd/wm831x-core.c @@ -306,161 +306,6 @@ out: } EXPORT_SYMBOL_GPL(wm831x_set_bits); -/** - * wm831x_auxadc_read: Read a value from the WM831x AUXADC - * - * @wm831x: Device to read from. - * @input: AUXADC input to read. - */ -int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input) -{ - int ret, src, irq_masked, timeout; - - /* Are we using the interrupt? */ - irq_masked = wm831x_reg_read(wm831x, WM831X_INTERRUPT_STATUS_1_MASK); - irq_masked &= WM831X_AUXADC_DATA_EINT; - - mutex_lock(&wm831x->auxadc_lock); - - ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, - WM831X_AUX_ENA, WM831X_AUX_ENA); - if (ret < 0) { - dev_err(wm831x->dev, "Failed to enable AUXADC: %d\n", ret); - goto out; - } - - /* We force a single source at present */ - src = input; - ret = wm831x_reg_write(wm831x, WM831X_AUXADC_SOURCE, - 1 << src); - if (ret < 0) { - dev_err(wm831x->dev, "Failed to set AUXADC source: %d\n", ret); - goto out; - } - - /* Clear any notification from a very late arriving interrupt */ - try_wait_for_completion(&wm831x->auxadc_done); - - ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, - WM831X_AUX_CVT_ENA, WM831X_AUX_CVT_ENA); - if (ret < 0) { - dev_err(wm831x->dev, "Failed to start AUXADC: %d\n", ret); - goto disable; - } - - if (irq_masked) { - /* If we're not using interrupts then poll the - * interrupt status register */ - timeout = 5; - while (timeout) { - msleep(1); - - ret = wm831x_reg_read(wm831x, - WM831X_INTERRUPT_STATUS_1); - if (ret < 0) { - dev_err(wm831x->dev, - "ISR 1 read failed: %d\n", ret); - goto disable; - } - - /* Did it complete? */ - if (ret & WM831X_AUXADC_DATA_EINT) { - wm831x_reg_write(wm831x, - WM831X_INTERRUPT_STATUS_1, - WM831X_AUXADC_DATA_EINT); - break; - } else { - dev_err(wm831x->dev, - "AUXADC conversion timeout\n"); - ret = -EBUSY; - goto disable; - } - } - - ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA); - if (ret < 0) { - dev_err(wm831x->dev, - "Failed to read AUXADC data: %d\n", ret); - goto disable; - } - - wm831x->auxadc_data = ret; - - } else { - /* If we are using interrupts then wait for the - * interrupt to complete. Use an extremely long - * timeout to handle situations with heavy load where - * the notification of the interrupt may be delayed by - * threaded IRQ handling. */ - if (!wait_for_completion_timeout(&wm831x->auxadc_done, - msecs_to_jiffies(500))) { - dev_err(wm831x->dev, "Timed out waiting for AUXADC\n"); - ret = -EBUSY; - goto disable; - } - } - - src = ((wm831x->auxadc_data & WM831X_AUX_DATA_SRC_MASK) - >> WM831X_AUX_DATA_SRC_SHIFT) - 1; - - if (src == 14) - src = WM831X_AUX_CAL; - - if (src != input) { - dev_err(wm831x->dev, "Data from source %d not %d\n", - src, input); - ret = -EINVAL; - } else { - ret = wm831x->auxadc_data & WM831X_AUX_DATA_MASK; - } - -disable: - wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, WM831X_AUX_ENA, 0); -out: - mutex_unlock(&wm831x->auxadc_lock); - return ret; -} -EXPORT_SYMBOL_GPL(wm831x_auxadc_read); - -static irqreturn_t wm831x_auxadc_irq(int irq, void *irq_data) -{ - struct wm831x *wm831x = irq_data; - int ret; - - ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA); - if (ret < 0) { - dev_err(wm831x->dev, - "Failed to read AUXADC data: %d\n", ret); - wm831x->auxadc_data = 0xffff; - } else { - wm831x->auxadc_data = ret; - } - - complete(&wm831x->auxadc_done); - - return IRQ_HANDLED; -} - -/** - * wm831x_auxadc_read_uv: Read a voltage from the WM831x AUXADC - * - * @wm831x: Device to read from. - * @input: AUXADC input to read. - */ -int wm831x_auxadc_read_uv(struct wm831x *wm831x, enum wm831x_auxadc input) -{ - int ret; - - ret = wm831x_auxadc_read(wm831x, input); - if (ret < 0) - return ret; - - ret *= 1465; - - return ret; -} -EXPORT_SYMBOL_GPL(wm831x_auxadc_read_uv); - static struct resource wm831x_dcdc1_resources[] = { { .start = WM831X_DC1_CONTROL_1, @@ -1447,8 +1292,6 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) mutex_init(&wm831x->io_lock); mutex_init(&wm831x->key_lock); - mutex_init(&wm831x->auxadc_lock); - init_completion(&wm831x->auxadc_done); dev_set_drvdata(wm831x->dev, wm831x); ret = wm831x_reg_read(wm831x, WM831X_PARENT_ID); @@ -1603,15 +1446,7 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) if (ret != 0) goto err; - if (wm831x->irq_base) { - ret = request_threaded_irq(wm831x->irq_base + - WM831X_IRQ_AUXADC_DATA, - NULL, wm831x_auxadc_irq, 0, - "auxadc", wm831x); - if (ret < 0) - dev_err(wm831x->dev, "AUXADC IRQ request failed: %d\n", - ret); - } + wm831x_auxadc_init(wm831x); /* The core device is up, instantiate the subdevices. */ switch (parent) { -- cgit v1.2.3-70-g09d2 From d1738aef387ab9591a6d13b00945e248b942c53f Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 2 Jun 2011 19:18:54 +0100 Subject: mfd: Allocate wm835x irq descs dynamically This allows boards to leave the irq_base field unitialized and prevents them having to reserve irqs in the platform. pdata can be optional for irq support now. Without pdata the driver allocates some free irq range. With pdata and irq_base > 0 the driver allocates exactly the specified irq. Without pdata the irq defaults to IRQF_TRIGGER_LOW. Signed-off-by: Sascha Hauer Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8350-irq.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/wm8350-irq.c b/drivers/mfd/wm8350-irq.c index ed4b22a167b..8a1fafd0bf7 100644 --- a/drivers/mfd/wm8350-irq.c +++ b/drivers/mfd/wm8350-irq.c @@ -473,17 +473,13 @@ int wm8350_irq_init(struct wm8350 *wm8350, int irq, { int ret, cur_irq, i; int flags = IRQF_ONESHOT; + int irq_base = -1; if (!irq) { dev_warn(wm8350->dev, "No interrupt support, no core IRQ\n"); return 0; } - if (!pdata || !pdata->irq_base) { - dev_warn(wm8350->dev, "No interrupt support, no IRQ base\n"); - return 0; - } - /* Mask top level interrupts */ wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0xFFFF); @@ -502,7 +498,17 @@ int wm8350_irq_init(struct wm8350 *wm8350, int irq, wm8350->chip_irq = irq; wm8350->irq_base = pdata->irq_base; - if (pdata->irq_high) { + if (pdata && pdata->irq_base > 0) + irq_base = pdata->irq_base; + + wm8350->irq_base = irq_alloc_descs(irq_base, 0, ARRAY_SIZE(wm8350_irqs), 0); + if (wm8350->irq_base < 0) { + dev_warn(wm8350->dev, "Allocating irqs failed with %d\n", + wm8350->irq_base); + return 0; + } + + if (pdata && pdata->irq_high) { flags |= IRQF_TRIGGER_HIGH; wm8350_set_bits(wm8350, WM8350_SYSTEM_CONTROL_1, -- cgit v1.2.3-70-g09d2 From a2495bc727e2dd8421fb85c80e38f9a4a4c1e58e Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 2 Jun 2011 19:18:55 +0100 Subject: mfd: Restructure wm8994-core device revision handling Switch on the device type before revision since anything we do here will be device as well as revision specific. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8994-core.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c index e198d40292e..18f19b7198a 100644 --- a/drivers/mfd/wm8994-core.c +++ b/drivers/mfd/wm8994-core.c @@ -476,13 +476,18 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq) goto err_enable; } - switch (ret) { - case 0: - case 1: - if (wm8994->type == WM8994) + switch (wm8994->type) { + case WM8994: + switch (ret) { + case 0: + case 1: dev_warn(wm8994->dev, "revision %c not fully supported\n", 'A' + ret); + break; + default: + break; + } break; default: break; -- cgit v1.2.3-70-g09d2 From 78bb3688ea1830672b8095fb6388593f582cd591 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 7 Jun 2011 11:47:28 +0100 Subject: mfd: Support multiple active WM831x AUXADC conversions The WM831x AUXADC hardware can schedule multiple conversions at once, allowing higher performance when more than one source is in use as we can have the hardware start new conversions without having to wait for a register write. Take advantage of this in the interrupt driven case, maintaining a list of callers that are waiting for AUXADC conversions and completing them all simultaneously. The external interface of the AUXADC is not changed so there will be limited use of the feature immediately. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm831x-auxadc.c | 254 ++++++++++++++++++++++++++++------------ include/linux/mfd/wm831x/core.h | 13 +- 2 files changed, 188 insertions(+), 79 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/wm831x-auxadc.c b/drivers/mfd/wm831x-auxadc.c index 2fc9531b243..87210954a06 100644 --- a/drivers/mfd/wm831x-auxadc.c +++ b/drivers/mfd/wm831x-auxadc.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -25,19 +26,139 @@ #include #include -/** - * wm831x_auxadc_read: Read a value from the WM831x AUXADC - * - * @wm831x: Device to read from. - * @input: AUXADC input to read. - */ -int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input) +struct wm831x_auxadc_req { + struct list_head list; + enum wm831x_auxadc input; + int val; + struct completion done; +}; + +static int wm831x_auxadc_read_irq(struct wm831x *wm831x, + enum wm831x_auxadc input) { - int ret, src, irq_masked, timeout; + struct wm831x_auxadc_req *req; + int ret; + bool ena = false; + + req = kzalloc(sizeof(*req), GFP_KERNEL); + if (!req) + return -ENOMEM; + + init_completion(&req->done); + req->input = input; + req->val = -ETIMEDOUT; + + mutex_lock(&wm831x->auxadc_lock); + + /* Enqueue the request */ + list_add(&req->list, &wm831x->auxadc_pending); + + ena = !wm831x->auxadc_active; + + if (ena) { + ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, + WM831X_AUX_ENA, WM831X_AUX_ENA); + if (ret != 0) { + dev_err(wm831x->dev, "Failed to enable AUXADC: %d\n", + ret); + goto out; + } + } + + /* Enable the conversion if not already running */ + if (!(wm831x->auxadc_active & (1 << input))) { + ret = wm831x_set_bits(wm831x, WM831X_AUXADC_SOURCE, + 1 << input, 1 << input); + if (ret != 0) { + dev_err(wm831x->dev, + "Failed to set AUXADC source: %d\n", ret); + goto out; + } + + wm831x->auxadc_active |= 1 << input; + } + + /* We convert at the fastest rate possible */ + if (ena) { + ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, + WM831X_AUX_CVT_ENA | + WM831X_AUX_RATE_MASK, + WM831X_AUX_CVT_ENA | + WM831X_AUX_RATE_MASK); + if (ret != 0) { + dev_err(wm831x->dev, "Failed to start AUXADC: %d\n", + ret); + goto out; + } + } + + mutex_unlock(&wm831x->auxadc_lock); + + /* Wait for an interrupt */ + wait_for_completion_timeout(&req->done, msecs_to_jiffies(500)); + + mutex_lock(&wm831x->auxadc_lock); + + list_del(&req->list); + ret = req->val; + +out: + mutex_unlock(&wm831x->auxadc_lock); + + kfree(req); + + return ret; +} + +static irqreturn_t wm831x_auxadc_irq(int irq, void *irq_data) +{ + struct wm831x *wm831x = irq_data; + struct wm831x_auxadc_req *req; + int ret, input, val; + + ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA); + if (ret < 0) { + dev_err(wm831x->dev, + "Failed to read AUXADC data: %d\n", ret); + return IRQ_NONE; + } + + input = ((ret & WM831X_AUX_DATA_SRC_MASK) + >> WM831X_AUX_DATA_SRC_SHIFT) - 1; + + if (input == 14) + input = WM831X_AUX_CAL; - /* Are we using the interrupt? */ - irq_masked = wm831x_reg_read(wm831x, WM831X_INTERRUPT_STATUS_1_MASK); - irq_masked &= WM831X_AUXADC_DATA_EINT; + val = ret & WM831X_AUX_DATA_MASK; + + mutex_lock(&wm831x->auxadc_lock); + + /* Disable this conversion, we're about to complete all users */ + wm831x_set_bits(wm831x, WM831X_AUXADC_SOURCE, + 1 << input, 0); + wm831x->auxadc_active &= ~(1 << input); + + /* Turn off the entire convertor if idle */ + if (!wm831x->auxadc_active) + wm831x_reg_write(wm831x, WM831X_AUXADC_CONTROL, 0); + + /* Wake up any threads waiting for this request */ + list_for_each_entry(req, &wm831x->auxadc_pending, list) { + if (req->input == input) { + req->val = val; + complete(&req->done); + } + } + + mutex_unlock(&wm831x->auxadc_lock); + + return IRQ_HANDLED; +} + +static int wm831x_auxadc_read_polled(struct wm831x *wm831x, + enum wm831x_auxadc input) +{ + int ret, src, timeout; mutex_lock(&wm831x->auxadc_lock); @@ -57,9 +178,6 @@ int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input) goto out; } - /* Clear any notification from a very late arriving interrupt */ - try_wait_for_completion(&wm831x->auxadc_done); - ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, WM831X_AUX_CVT_ENA, WM831X_AUX_CVT_ENA); if (ret < 0) { @@ -67,59 +185,42 @@ int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input) goto disable; } - if (irq_masked) { - /* If we're not using interrupts then poll the - * interrupt status register */ - timeout = 5; - while (timeout) { - msleep(1); - - ret = wm831x_reg_read(wm831x, - WM831X_INTERRUPT_STATUS_1); - if (ret < 0) { - dev_err(wm831x->dev, - "ISR 1 read failed: %d\n", ret); - goto disable; - } - - /* Did it complete? */ - if (ret & WM831X_AUXADC_DATA_EINT) { - wm831x_reg_write(wm831x, - WM831X_INTERRUPT_STATUS_1, - WM831X_AUXADC_DATA_EINT); - break; - } else { - dev_err(wm831x->dev, - "AUXADC conversion timeout\n"); - ret = -EBUSY; - goto disable; - } - } + /* If we're not using interrupts then poll the + * interrupt status register */ + timeout = 5; + while (timeout) { + msleep(1); - ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA); + ret = wm831x_reg_read(wm831x, + WM831X_INTERRUPT_STATUS_1); if (ret < 0) { dev_err(wm831x->dev, - "Failed to read AUXADC data: %d\n", ret); + "ISR 1 read failed: %d\n", ret); goto disable; } - wm831x->auxadc_data = ret; - - } else { - /* If we are using interrupts then wait for the - * interrupt to complete. Use an extremely long - * timeout to handle situations with heavy load where - * the notification of the interrupt may be delayed by - * threaded IRQ handling. */ - if (!wait_for_completion_timeout(&wm831x->auxadc_done, - msecs_to_jiffies(500))) { - dev_err(wm831x->dev, "Timed out waiting for AUXADC\n"); + /* Did it complete? */ + if (ret & WM831X_AUXADC_DATA_EINT) { + wm831x_reg_write(wm831x, + WM831X_INTERRUPT_STATUS_1, + WM831X_AUXADC_DATA_EINT); + break; + } else { + dev_err(wm831x->dev, + "AUXADC conversion timeout\n"); ret = -EBUSY; goto disable; } } - src = ((wm831x->auxadc_data & WM831X_AUX_DATA_SRC_MASK) + ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA); + if (ret < 0) { + dev_err(wm831x->dev, + "Failed to read AUXADC data: %d\n", ret); + goto disable; + } + + src = ((ret & WM831X_AUX_DATA_SRC_MASK) >> WM831X_AUX_DATA_SRC_SHIFT) - 1; if (src == 14) @@ -130,7 +231,7 @@ int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input) src, input); ret = -EINVAL; } else { - ret = wm831x->auxadc_data & WM831X_AUX_DATA_MASK; + ret &= WM831X_AUX_DATA_MASK; } disable: @@ -139,26 +240,18 @@ out: mutex_unlock(&wm831x->auxadc_lock); return ret; } -EXPORT_SYMBOL_GPL(wm831x_auxadc_read); -static irqreturn_t wm831x_auxadc_irq(int irq, void *irq_data) +/** + * wm831x_auxadc_read: Read a value from the WM831x AUXADC + * + * @wm831x: Device to read from. + * @input: AUXADC input to read. + */ +int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input) { - struct wm831x *wm831x = irq_data; - int ret; - - ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA); - if (ret < 0) { - dev_err(wm831x->dev, - "Failed to read AUXADC data: %d\n", ret); - wm831x->auxadc_data = 0xffff; - } else { - wm831x->auxadc_data = ret; - } - - complete(&wm831x->auxadc_done); - - return IRQ_HANDLED; + return wm831x->auxadc_read(wm831x, input); } +EXPORT_SYMBOL_GPL(wm831x_auxadc_read); /** * wm831x_auxadc_read_uv: Read a voltage from the WM831x AUXADC @@ -185,15 +278,22 @@ void wm831x_auxadc_init(struct wm831x *wm831x) int ret; mutex_init(&wm831x->auxadc_lock); - init_completion(&wm831x->auxadc_done); + INIT_LIST_HEAD(&wm831x->auxadc_pending); + + if (wm831x->irq && wm831x->irq_base) { + wm831x->auxadc_read = wm831x_auxadc_read_irq; - if (wm831x->irq_base) { ret = request_threaded_irq(wm831x->irq_base + WM831X_IRQ_AUXADC_DATA, NULL, wm831x_auxadc_irq, 0, "auxadc", wm831x); - if (ret < 0) + if (ret < 0) { dev_err(wm831x->dev, "AUXADC IRQ request failed: %d\n", ret); + wm831x->auxadc_read = NULL; + } } + + if (!wm831x->auxadc_read) + wm831x->auxadc_read = wm831x_auxadc_read_polled; } diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h index 592e4fd6ab3..9fa14cdc159 100644 --- a/include/linux/mfd/wm831x/core.h +++ b/include/linux/mfd/wm831x/core.h @@ -17,6 +17,7 @@ #include #include +#include /* * Register values. @@ -249,6 +250,12 @@ enum wm831x_parent { WM8326 = 0x8326, }; +struct wm831x; +enum wm831x_auxadc; + +typedef int (*wm831x_auxadc_read_fn)(struct wm831x *wm831x, + enum wm831x_auxadc input); + struct wm831x { struct mutex io_lock; @@ -277,8 +284,9 @@ struct wm831x { int gpio_update[WM831X_NUM_GPIO_REGS]; struct mutex auxadc_lock; - struct completion auxadc_done; - u16 auxadc_data; + struct list_head auxadc_pending; + u16 auxadc_active; + wm831x_auxadc_read_fn auxadc_read; /* The WM831x has a security key blocking access to certain * registers. The mutex is taken by the accessors for locking @@ -305,5 +313,6 @@ void wm831x_device_exit(struct wm831x *wm831x); int wm831x_device_suspend(struct wm831x *wm831x); int wm831x_irq_init(struct wm831x *wm831x, int irq); void wm831x_irq_exit(struct wm831x *wm831x); +void wm831x_auxadc_init(struct wm831x *wm831x); #endif -- cgit v1.2.3-70-g09d2 From 98ae1ccaf62d5006884e01159bf7a63174b0fc03 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 7 Jun 2011 11:49:42 +0100 Subject: mfd: Fix WM8994 IRQ register cache restore on resume When the byte swap was factored out into the per-register I/O functions the register restore for the IRQ mask cache (which we use and store in CPU native format for the interrupt handler) was not updated to do a byte swap when it uses the bulk I/O. Fix this by writing the cache out one register at a time. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8994-core.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c index 18f19b7198a..7caf0d82a9a 100644 --- a/drivers/mfd/wm8994-core.c +++ b/drivers/mfd/wm8994-core.c @@ -316,7 +316,7 @@ static int wm8994_suspend(struct device *dev) static int wm8994_resume(struct device *dev) { struct wm8994 *wm8994 = dev_get_drvdata(dev); - int ret; + int ret, i; /* We may have lied to the PM core about suspending */ if (!wm8994->suspended) @@ -329,10 +329,16 @@ static int wm8994_resume(struct device *dev) return ret; } - ret = wm8994_write(wm8994, WM8994_INTERRUPT_STATUS_1_MASK, - WM8994_NUM_IRQ_REGS * 2, &wm8994->irq_masks_cur); - if (ret < 0) - dev_err(dev, "Failed to restore interrupt masks: %d\n", ret); + /* Write register at a time as we use the cache on the CPU so store + * it in native endian. + */ + for (i = 0; i < ARRAY_SIZE(wm8994->irq_masks_cur); i++) { + ret = wm8994_reg_write(wm8994, WM8994_INTERRUPT_STATUS_1_MASK + + i, wm8994->irq_masks_cur[i]); + if (ret < 0) + dev_err(dev, "Failed to restore interrupt masks: %d\n", + ret); + } ret = wm8994_write(wm8994, WM8994_LDO_1, WM8994_NUM_LDO_REGS * 2, &wm8994->ldo_regs); -- cgit v1.2.3-70-g09d2 From f85dbda076a11c18b396f8acfff929e53159e56d Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 17 Jun 2011 12:19:41 +0100 Subject: mfd: Fix error handling if BUG() isn't enabled in WM8994 Even if we would've BUG()ed we should still tidy up after ourselves if that isn't enabled in the kernel config. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8994-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c index 7caf0d82a9a..96479c9b172 100644 --- a/drivers/mfd/wm8994-core.c +++ b/drivers/mfd/wm8994-core.c @@ -409,7 +409,7 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq) break; default: BUG(); - return -EINVAL; + goto err; } wm8994->supplies = kzalloc(sizeof(struct regulator_bulk_data) * @@ -431,7 +431,7 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq) break; default: BUG(); - return -EINVAL; + goto err; } ret = regulator_bulk_get(wm8994->dev, wm8994->num_supplies, -- cgit v1.2.3-70-g09d2 From 914e6d4e36015180bdcb6b99e96adc6293b7c2c6 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 3 Jun 2011 03:14:26 +0200 Subject: mfd: Use generic irq chip for jz4740-adc Use the generic irq chip framework for implementing the irq chip for the jz4740-adc driver. Signed-off-by: Lars-Peter Clausen Cc: Thomas Gleixner Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 3 +- drivers/mfd/jz4740-adc.c | 90 +++++++++++++++--------------------------------- 2 files changed, 30 insertions(+), 63 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 37b83eb6d70..1e2c9f03629 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -662,8 +662,9 @@ config MFD_JANZ_CMODIO CAN and GPIO controllers. config MFD_JZ4740_ADC - tristate "Support for the JZ4740 SoC ADC core" + bool "Support for the JZ4740 SoC ADC core" select MFD_CORE + select GENERIC_IRQ_CHIP depends on MACH_JZ4740 help Say yes here if you want support for the ADC unit in the JZ4740 SoC. diff --git a/drivers/mfd/jz4740-adc.c b/drivers/mfd/jz4740-adc.c index a0bd0cf05af..21131c7b0f1 100644 --- a/drivers/mfd/jz4740-adc.c +++ b/drivers/mfd/jz4740-adc.c @@ -56,7 +56,7 @@ struct jz4740_adc { void __iomem *base; int irq; - int irq_base; + struct irq_chip_generic *gc; struct clk *clk; atomic_t clk_ref; @@ -64,63 +64,17 @@ struct jz4740_adc { spinlock_t lock; }; -static inline void jz4740_adc_irq_set_masked(struct jz4740_adc *adc, int irq, - bool masked) -{ - unsigned long flags; - uint8_t val; - - irq -= adc->irq_base; - - spin_lock_irqsave(&adc->lock, flags); - - val = readb(adc->base + JZ_REG_ADC_CTRL); - if (masked) - val |= BIT(irq); - else - val &= ~BIT(irq); - writeb(val, adc->base + JZ_REG_ADC_CTRL); - - spin_unlock_irqrestore(&adc->lock, flags); -} - -static void jz4740_adc_irq_mask(struct irq_data *data) -{ - struct jz4740_adc *adc = irq_data_get_irq_chip_data(data); - jz4740_adc_irq_set_masked(adc, data->irq, true); -} - -static void jz4740_adc_irq_unmask(struct irq_data *data) -{ - struct jz4740_adc *adc = irq_data_get_irq_chip_data(data); - jz4740_adc_irq_set_masked(adc, data->irq, false); -} - -static void jz4740_adc_irq_ack(struct irq_data *data) -{ - struct jz4740_adc *adc = irq_data_get_irq_chip_data(data); - unsigned int irq = data->irq - adc->irq_base; - writeb(BIT(irq), adc->base + JZ_REG_ADC_STATUS); -} - -static struct irq_chip jz4740_adc_irq_chip = { - .name = "jz4740-adc", - .irq_mask = jz4740_adc_irq_mask, - .irq_unmask = jz4740_adc_irq_unmask, - .irq_ack = jz4740_adc_irq_ack, -}; - static void jz4740_adc_irq_demux(unsigned int irq, struct irq_desc *desc) { - struct jz4740_adc *adc = irq_desc_get_handler_data(desc); + struct irq_chip_generic *gc = irq_desc_get_handler_data(desc); uint8_t status; unsigned int i; - status = readb(adc->base + JZ_REG_ADC_STATUS); + status = readb(gc->reg_base + JZ_REG_ADC_STATUS); for (i = 0; i < 5; ++i) { if (status & BIT(i)) - generic_handle_irq(adc->irq_base + i); + generic_handle_irq(gc->irq_base + i); } } @@ -249,10 +203,12 @@ const struct mfd_cell jz4740_adc_cells[] = { static int __devinit jz4740_adc_probe(struct platform_device *pdev) { - int ret; + struct irq_chip_generic *gc; + struct irq_chip_type *ct; struct jz4740_adc *adc; struct resource *mem_base; - int irq; + int ret; + int irq_base; adc = kmalloc(sizeof(*adc), GFP_KERNEL); if (!adc) { @@ -267,9 +223,9 @@ static int __devinit jz4740_adc_probe(struct platform_device *pdev) goto err_free; } - adc->irq_base = platform_get_irq(pdev, 1); - if (adc->irq_base < 0) { - ret = adc->irq_base; + irq_base = platform_get_irq(pdev, 1); + if (irq_base < 0) { + ret = irq_base; dev_err(&pdev->dev, "Failed to get irq base: %d\n", ret); goto err_free; } @@ -309,20 +265,28 @@ static int __devinit jz4740_adc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, adc); - for (irq = adc->irq_base; irq < adc->irq_base + 5; ++irq) { - irq_set_chip_data(irq, adc); - irq_set_chip_and_handler(irq, &jz4740_adc_irq_chip, - handle_level_irq); - } + gc = irq_alloc_generic_chip("INTC", 1, irq_base, adc->base, + handle_level_irq); + + ct = gc->chip_types; + ct->regs.mask = JZ_REG_ADC_CTRL; + ct->regs.ack = JZ_REG_ADC_STATUS; + ct->chip.irq_mask = irq_gc_mask_set_bit; + ct->chip.irq_unmask = irq_gc_mask_clr_bit; + ct->chip.irq_ack = irq_gc_ack; + + irq_setup_generic_chip(gc, IRQ_MSK(5), 0, 0, IRQ_NOPROBE | IRQ_LEVEL); + + adc->gc = gc; - irq_set_handler_data(adc->irq, adc); + irq_set_handler_data(adc->irq, gc); irq_set_chained_handler(adc->irq, jz4740_adc_irq_demux); writeb(0x00, adc->base + JZ_REG_ADC_ENABLE); writeb(0xff, adc->base + JZ_REG_ADC_CTRL); ret = mfd_add_devices(&pdev->dev, 0, jz4740_adc_cells, - ARRAY_SIZE(jz4740_adc_cells), mem_base, adc->irq_base); + ARRAY_SIZE(jz4740_adc_cells), mem_base, irq_base); if (ret < 0) goto err_clk_put; @@ -347,6 +311,8 @@ static int __devexit jz4740_adc_remove(struct platform_device *pdev) mfd_remove_devices(&pdev->dev); + irq_remove_generic_chip(adc->gc, IRQ_MSK(5), IRQ_NOPROBE | IRQ_LEVEL, 0); + kfree(adc->gc); irq_set_handler_data(adc->irq, NULL); irq_set_chained_handler(adc->irq, NULL); -- cgit v1.2.3-70-g09d2 From 402fb487005d0fcbd4ce627b10426b3491ac0590 Mon Sep 17 00:00:00 2001 From: Peter Huewe Date: Mon, 6 Jun 2011 22:43:31 +0200 Subject: mfd: Use kstrtoul_from_user in ab3550 This patch replaces the code for getting an unsigned long from a userspace buffer by a simple call to kstroul_from_user. This makes it easier to read and less error prone. Signed-off-by: Peter Huewe Signed-off-by: Samuel Ortiz --- drivers/mfd/ab3550-core.c | 41 +++++++++++------------------------------ 1 file changed, 11 insertions(+), 30 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab3550-core.c b/drivers/mfd/ab3550-core.c index 3d7dce671b9..56ba1943c91 100644 --- a/drivers/mfd/ab3550-core.c +++ b/drivers/mfd/ab3550-core.c @@ -879,20 +879,13 @@ static ssize_t ab3550_bank_write(struct file *file, size_t count, loff_t *ppos) { struct ab3550 *ab = ((struct seq_file *)(file->private_data))->private; - char buf[32]; - int buf_size; unsigned long user_bank; int err; /* Get userspace string and assure termination */ - buf_size = min(count, (sizeof(buf) - 1)); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - buf[buf_size] = 0; - - err = strict_strtoul(buf, 0, &user_bank); + err = kstrtoul_from_user(user_buf, count, 0, &user_bank); if (err) - return -EINVAL; + return err; if (user_bank >= AB3550_NUM_BANKS) { dev_err(&ab->i2c_client[0]->dev, @@ -902,7 +895,7 @@ static ssize_t ab3550_bank_write(struct file *file, ab->debug_bank = user_bank; - return buf_size; + return count; } static int ab3550_address_print(struct seq_file *s, void *p) @@ -923,27 +916,21 @@ static ssize_t ab3550_address_write(struct file *file, size_t count, loff_t *ppos) { struct ab3550 *ab = ((struct seq_file *)(file->private_data))->private; - char buf[32]; - int buf_size; unsigned long user_address; int err; /* Get userspace string and assure termination */ - buf_size = min(count, (sizeof(buf) - 1)); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - buf[buf_size] = 0; - - err = strict_strtoul(buf, 0, &user_address); + err = kstrtoul_from_user(user_buf, count, 0, &user_address); if (err) - return -EINVAL; + return err; + if (user_address > 0xff) { dev_err(&ab->i2c_client[0]->dev, "debugfs error input > 0xff\n"); return -EINVAL; } ab->debug_address = user_address; - return buf_size; + return count; } static int ab3550_val_print(struct seq_file *s, void *p) @@ -971,21 +958,15 @@ static ssize_t ab3550_val_write(struct file *file, size_t count, loff_t *ppos) { struct ab3550 *ab = ((struct seq_file *)(file->private_data))->private; - char buf[32]; - int buf_size; unsigned long user_val; int err; u8 regvalue; /* Get userspace string and assure termination */ - buf_size = min(count, (sizeof(buf)-1)); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - buf[buf_size] = 0; - - err = strict_strtoul(buf, 0, &user_val); + err = kstrtoul_from_user(user_buf, count, 0, &user_val); if (err) - return -EINVAL; + return err; + if (user_val > 0xff) { dev_err(&ab->i2c_client[0]->dev, "debugfs error input > 0xff\n"); @@ -1002,7 +983,7 @@ static ssize_t ab3550_val_write(struct file *file, if (err) return -EINVAL; - return buf_size; + return count; } static const struct file_operations ab3550_bank_fops = { -- cgit v1.2.3-70-g09d2 From 8504d638041d50901b8bfba4fe646bd0bbb5cbb9 Mon Sep 17 00:00:00 2001 From: Peter Huewe Date: Mon, 6 Jun 2011 22:43:32 +0200 Subject: mfd: Use kstrtoul_from_user in ab8500 This patch replaces the code for getting an unsigned long from a userspace buffer by a simple call to kstroul_from_user. This makes it easier to read and less error prone. Signed-off-by: Peter Huewe Signed-off-by: Samuel Ortiz --- drivers/mfd/ab8500-debugfs.c | 41 +++++++++++------------------------------ 1 file changed, 11 insertions(+), 30 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c index 64748e42ac0..64bdeeb1c11 100644 --- a/drivers/mfd/ab8500-debugfs.c +++ b/drivers/mfd/ab8500-debugfs.c @@ -419,20 +419,13 @@ static ssize_t ab8500_bank_write(struct file *file, size_t count, loff_t *ppos) { struct device *dev = ((struct seq_file *)(file->private_data))->private; - char buf[32]; - int buf_size; unsigned long user_bank; int err; /* Get userspace string and assure termination */ - buf_size = min(count, (sizeof(buf) - 1)); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - buf[buf_size] = 0; - - err = strict_strtoul(buf, 0, &user_bank); + err = kstrtoul_from_user(user_buf, count, 0, &user_bank); if (err) - return -EINVAL; + return err; if (user_bank >= AB8500_NUM_BANKS) { dev_err(dev, "debugfs error input > number of banks\n"); @@ -441,7 +434,7 @@ static ssize_t ab8500_bank_write(struct file *file, debug_bank = user_bank; - return buf_size; + return count; } static int ab8500_address_print(struct seq_file *s, void *p) @@ -459,26 +452,20 @@ static ssize_t ab8500_address_write(struct file *file, size_t count, loff_t *ppos) { struct device *dev = ((struct seq_file *)(file->private_data))->private; - char buf[32]; - int buf_size; unsigned long user_address; int err; /* Get userspace string and assure termination */ - buf_size = min(count, (sizeof(buf) - 1)); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - buf[buf_size] = 0; - - err = strict_strtoul(buf, 0, &user_address); + err = kstrtoul_from_user(user_buf, count, 0, &user_address); if (err) - return -EINVAL; + return err; + if (user_address > 0xff) { dev_err(dev, "debugfs error input > 0xff\n"); return -EINVAL; } debug_address = user_address; - return buf_size; + return count; } static int ab8500_val_print(struct seq_file *s, void *p) @@ -509,20 +496,14 @@ static ssize_t ab8500_val_write(struct file *file, size_t count, loff_t *ppos) { struct device *dev = ((struct seq_file *)(file->private_data))->private; - char buf[32]; - int buf_size; unsigned long user_val; int err; /* Get userspace string and assure termination */ - buf_size = min(count, (sizeof(buf)-1)); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - buf[buf_size] = 0; - - err = strict_strtoul(buf, 0, &user_val); + err = kstrtoul_from_user(user_buf, count, 0, &user_val); if (err) - return -EINVAL; + return err; + if (user_val > 0xff) { dev_err(dev, "debugfs error input > 0xff\n"); return -EINVAL; @@ -534,7 +515,7 @@ static ssize_t ab8500_val_write(struct file *file, return -EINVAL; } - return buf_size; + return count; } static const struct file_operations ab8500_bank_fops = { -- cgit v1.2.3-70-g09d2 From 36e52873c6393b569f2befcdd1847929211892b8 Mon Sep 17 00:00:00 2001 From: Margarita Olaya Date: Thu, 9 Jun 2011 14:50:00 -0500 Subject: mfd: tps65912: Add new mfd device The tps65912 chip is a power management IC. It contains the following components: - Regulators - GPIO controller The core driver is registered as a platform driver, it provides communication through I2C and SPI interfaces. Signed-off-by: Margarita Olaya Cabrera Acked-by: Samuel Ortiz Acked-by: Liam Girdwood Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 22 +++ drivers/mfd/Makefile | 4 + drivers/mfd/tps65912-core.c | 164 ++++++++++++++++++++++ drivers/mfd/tps65912-i2c.c | 139 +++++++++++++++++++ drivers/mfd/tps65912-spi.c | 142 +++++++++++++++++++ include/linux/mfd/tps65912.h | 321 +++++++++++++++++++++++++++++++++++++++++++ 6 files changed, 792 insertions(+) create mode 100644 drivers/mfd/tps65912-core.c create mode 100644 drivers/mfd/tps65912-i2c.c create mode 100644 drivers/mfd/tps65912-spi.c create mode 100644 include/linux/mfd/tps65912.h (limited to 'drivers/mfd') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 1e2c9f03629..f94036a4f33 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -171,6 +171,28 @@ config MFD_TPS6586X This driver can also be built as a module. If so, the module will be called tps6586x. +config MFD_TPS65912 + bool "TPS65912 PMIC" + depends on GPIOLIB + +config MFD_TPS65912_I2C + bool "TPS95612 Power Management chip with I2C" + select MFD_CORE + select MFD_TPS65912 + depends on I2C=y && GPIOLIB + help + If you say yes here you get support for the TPS65912 series of + PM chips with I2C interface. + +config MFD_TPS65912_SPI + bool "TPS65912 Power Management chip with SPI" + select MFD_CORE + select MFD_TPS65912 + depends on SPI_MASTER && GPIOLIB + help + If you say yes here you get support for the TPS65912 series of + PM chips with SPI interface. + config MENELAUS bool "Texas Instruments TWL92330/Menelaus PM chip" depends on I2C=y && ARCH_OMAP2 diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 0889f53c8b0..c9925e5dad9 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -36,6 +36,10 @@ obj-$(CONFIG_MFD_WM8994) += wm8994-core.o wm8994-irq.o obj-$(CONFIG_TPS6105X) += tps6105x.o obj-$(CONFIG_TPS65010) += tps65010.o obj-$(CONFIG_TPS6507X) += tps6507x.o +tps65912-objs := tps65912-core.o +obj-$(CONFIG_MFD_TPS65912) += tps65912.o +obj-$(CONFIG_MFD_TPS65912_I2C) += tps65912-i2c.o +obj-$(CONFIG_MFD_TPS65912_SPI) += tps65912-spi.o obj-$(CONFIG_MENELAUS) += menelaus.o obj-$(CONFIG_TWL4030_CORE) += twl-core.o twl4030-irq.o twl6030-irq.o diff --git a/drivers/mfd/tps65912-core.c b/drivers/mfd/tps65912-core.c new file mode 100644 index 00000000000..10baf765554 --- /dev/null +++ b/drivers/mfd/tps65912-core.c @@ -0,0 +1,164 @@ +/* + * tps65912-core.c -- TI TPS65912x + * + * Copyright 2011 Texas Instruments Inc. + * + * Author: Margarita Olaya Cabrera + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This driver is based on wm8350 implementation. + */ + +#include +#include +#include +#include +#include +#include +#include + +static struct mfd_cell tps65912s[] = { + { + .name = "tps65912-pmic", + }, +}; + +int tps65912_set_bits(struct tps65912 *tps65912, u8 reg, u8 mask) +{ + u8 data; + int err; + + mutex_lock(&tps65912->io_mutex); + + err = tps65912->read(tps65912, reg, 1, &data); + if (err) { + dev_err(tps65912->dev, "Read from reg 0x%x failed\n", reg); + goto out; + } + + data |= mask; + err = tps65912->write(tps65912, reg, 1, &data); + if (err) + dev_err(tps65912->dev, "Write to reg 0x%x failed\n", reg); + +out: + mutex_unlock(&tps65912->io_mutex); + return err; +} +EXPORT_SYMBOL_GPL(tps65912_set_bits); + +int tps65912_clear_bits(struct tps65912 *tps65912, u8 reg, u8 mask) +{ + u8 data; + int err; + + mutex_lock(&tps65912->io_mutex); + err = tps65912->read(tps65912, reg, 1, &data); + if (err) { + dev_err(tps65912->dev, "Read from reg 0x%x failed\n", reg); + goto out; + } + + data &= ~mask; + err = tps65912->write(tps65912, reg, 1, &data); + if (err) + dev_err(tps65912->dev, "Write to reg 0x%x failed\n", reg); + +out: + mutex_unlock(&tps65912->io_mutex); + return err; +} +EXPORT_SYMBOL_GPL(tps65912_clear_bits); + +static inline int tps65912_read(struct tps65912 *tps65912, u8 reg) +{ + u8 val; + int err; + + err = tps65912->read(tps65912, reg, 1, &val); + if (err < 0) + return err; + + return val; +} + +static inline int tps65912_write(struct tps65912 *tps65912, u8 reg, u8 val) +{ + return tps65912->write(tps65912, reg, 1, &val); +} + +int tps65912_reg_read(struct tps65912 *tps65912, u8 reg) +{ + int data; + + mutex_lock(&tps65912->io_mutex); + + data = tps65912_read(tps65912, reg); + if (data < 0) + dev_err(tps65912->dev, "Read from reg 0x%x failed\n", reg); + + mutex_unlock(&tps65912->io_mutex); + return data; +} +EXPORT_SYMBOL_GPL(tps65912_reg_read); + +int tps65912_reg_write(struct tps65912 *tps65912, u8 reg, u8 val) +{ + int err; + + mutex_lock(&tps65912->io_mutex); + + err = tps65912_write(tps65912, reg, val); + if (err < 0) + dev_err(tps65912->dev, "Write for reg 0x%x failed\n", reg); + + mutex_unlock(&tps65912->io_mutex); + return err; +} +EXPORT_SYMBOL_GPL(tps65912_reg_write); + +int tps65912_device_init(struct tps65912 *tps65912) +{ + struct tps65912_board *pmic_plat_data = tps65912->dev->platform_data; + int ret, dcdc_avs, value; + + mutex_init(&tps65912->io_mutex); + dev_set_drvdata(tps65912->dev, tps65912); + + dcdc_avs = (pmic_plat_data->is_dcdc1_avs << 0 | + pmic_plat_data->is_dcdc2_avs << 1 | + pmic_plat_data->is_dcdc3_avs << 2 | + pmic_plat_data->is_dcdc4_avs << 3); + if (dcdc_avs) { + tps65912->read(tps65912, TPS65912_I2C_SPI_CFG, 1, &value); + dcdc_avs |= value; + tps65912->write(tps65912, TPS65912_I2C_SPI_CFG, 1, &dcdc_avs); + } + + ret = mfd_add_devices(tps65912->dev, -1, + tps65912s, ARRAY_SIZE(tps65912s), + NULL, 0); + if (ret < 0) + goto err; + + return ret; + +err: + mfd_remove_devices(tps65912->dev); + kfree(tps65912); + return ret; +} + +void tps65912_device_exit(struct tps65912 *tps65912) +{ + mfd_remove_devices(tps65912->dev); + kfree(tps65912); +} + +MODULE_AUTHOR("Margarita Olaya "); +MODULE_DESCRIPTION("TPS65912x chip family multi-function driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/tps65912-i2c.c b/drivers/mfd/tps65912-i2c.c new file mode 100644 index 00000000000..9ed123aa662 --- /dev/null +++ b/drivers/mfd/tps65912-i2c.c @@ -0,0 +1,139 @@ +/* + * tps65912-i2c.c -- I2C access for TI TPS65912x PMIC + * + * Copyright 2011 Texas Instruments Inc. + * + * Author: Margarita Olaya Cabrera + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This driver is based on wm8350 implementation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +static int tps65912_i2c_read(struct tps65912 *tps65912, u8 reg, + int bytes, void *dest) +{ + struct i2c_client *i2c = tps65912->control_data; + struct i2c_msg xfer[2]; + int ret; + + /* Write register */ + xfer[0].addr = i2c->addr; + xfer[0].flags = 0; + xfer[0].len = 1; + xfer[0].buf = ® + + /* Read data */ + xfer[1].addr = i2c->addr; + xfer[1].flags = I2C_M_RD; + xfer[1].len = bytes; + xfer[1].buf = dest; + + ret = i2c_transfer(i2c->adapter, xfer, 2); + if (ret == 2) + ret = 0; + else if (ret >= 0) + ret = -EIO; + return ret; +} + +static int tps65912_i2c_write(struct tps65912 *tps65912, u8 reg, + int bytes, void *src) +{ + struct i2c_client *i2c = tps65912->control_data; + /* we add 1 byte for device register */ + u8 msg[TPS6591X_MAX_REGISTER + 1]; + int ret; + + if (bytes > (TPS6591X_MAX_REGISTER + 1)) + return -EINVAL; + + msg[0] = reg; + memcpy(&msg[1], src, bytes); + + ret = i2c_master_send(i2c, msg, bytes + 1); + if (ret < 0) + return ret; + if (ret != bytes + 1) + return -EIO; + + return 0; +} + +static int tps65912_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct tps65912 *tps65912; + + tps65912 = kzalloc(sizeof(struct tps65912), GFP_KERNEL); + if (tps65912 == NULL) + return -ENOMEM; + + i2c_set_clientdata(i2c, tps65912); + tps65912->dev = &i2c->dev; + tps65912->control_data = i2c; + tps65912->read = tps65912_i2c_read; + tps65912->write = tps65912_i2c_write; + + return tps65912_device_init(tps65912); +} + +static int tps65912_i2c_remove(struct i2c_client *i2c) +{ + struct tps65912 *tps65912 = i2c_get_clientdata(i2c); + + tps65912_device_exit(tps65912); + + return 0; +} + +static const struct i2c_device_id tps65912_i2c_id[] = { + {"tps65912", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tps65912_i2c_id); + +static struct i2c_driver tps65912_i2c_driver = { + .driver = { + .name = "tps65912", + .owner = THIS_MODULE, + }, + .probe = tps65912_i2c_probe, + .remove = tps65912_i2c_remove, + .id_table = tps65912_i2c_id, +}; + +static int __init tps65912_i2c_init(void) +{ + int ret; + + ret = i2c_add_driver(&tps65912_i2c_driver); + if (ret != 0) + pr_err("Failed to register TPS65912 I2C driver: %d\n", ret); + + return ret; +} +/* init early so consumer devices can complete system boot */ +subsys_initcall(tps65912_i2c_init); + +static void __exit tps65912_i2c_exit(void) +{ + i2c_del_driver(&tps65912_i2c_driver); +} +module_exit(tps65912_i2c_exit); + +MODULE_AUTHOR("Margarita Olaya "); +MODULE_DESCRIPTION("TPS6591x chip family multi-function driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/tps65912-spi.c b/drivers/mfd/tps65912-spi.c new file mode 100644 index 00000000000..6d71e0d2574 --- /dev/null +++ b/drivers/mfd/tps65912-spi.c @@ -0,0 +1,142 @@ +/* + * tps65912-spi.c -- SPI access for TI TPS65912x PMIC + * + * Copyright 2011 Texas Instruments Inc. + * + * Author: Margarita Olaya Cabrera + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This driver is based on wm8350 implementation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +static int tps65912_spi_write(struct tps65912 *tps65912, u8 addr, + int bytes, void *src) +{ + struct spi_device *spi = tps65912->control_data; + u8 *data = (u8 *) src; + int ret; + /* bit 23 is the read/write bit */ + unsigned long spi_data = 1 << 23 | addr << 15 | *data; + struct spi_transfer xfer; + struct spi_message msg; + u32 tx_buf, rx_buf; + + tx_buf = spi_data; + rx_buf = 0; + + xfer.tx_buf = &tx_buf; + xfer.rx_buf = NULL; + xfer.len = sizeof(unsigned long); + xfer.bits_per_word = 24; + + spi_message_init(&msg); + spi_message_add_tail(&xfer, &msg); + + ret = spi_sync(spi, &msg); + return ret; +} + +static int tps65912_spi_read(struct tps65912 *tps65912, u8 addr, + int bytes, void *dest) +{ + struct spi_device *spi = tps65912->control_data; + /* bit 23 is the read/write bit */ + unsigned long spi_data = 0 << 23 | addr << 15; + struct spi_transfer xfer; + struct spi_message msg; + int ret; + u8 *data = (u8 *) dest; + u32 tx_buf, rx_buf; + + tx_buf = spi_data; + rx_buf = 0; + + xfer.tx_buf = &tx_buf; + xfer.rx_buf = &rx_buf; + xfer.len = sizeof(unsigned long); + xfer.bits_per_word = 24; + + spi_message_init(&msg); + spi_message_add_tail(&xfer, &msg); + + if (spi == NULL) + return 0; + + ret = spi_sync(spi, &msg); + if (ret == 0) + *data = (u8) (rx_buf & 0xFF); + return ret; +} + +static int __devinit tps65912_spi_probe(struct spi_device *spi) +{ + struct tps65912 *tps65912; + + tps65912 = kzalloc(sizeof(struct tps65912), GFP_KERNEL); + if (tps65912 == NULL) + return -ENOMEM; + + tps65912->dev = &spi->dev; + tps65912->control_data = spi; + tps65912->read = tps65912_spi_read; + tps65912->write = tps65912_spi_write; + + spi_set_drvdata(spi, tps65912); + + return tps65912_device_init(tps65912); +} + +static int __devexit tps65912_spi_remove(struct spi_device *spi) +{ + struct tps65912 *tps65912 = spi_get_drvdata(spi); + + tps65912_device_exit(tps65912); + + return 0; +} + +static struct spi_driver tps65912_spi_driver = { + .driver = { + .name = "tps65912", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = tps65912_spi_probe, + .remove = __devexit_p(tps65912_spi_remove), +}; + +static int __init tps65912_spi_init(void) +{ + int ret; + + ret = spi_register_driver(&tps65912_spi_driver); + if (ret != 0) + pr_err("Failed to register TPS65912 SPI driver: %d\n", ret); + + return 0; +} +/* init early so consumer devices can complete system boot */ +subsys_initcall(tps65912_spi_init); + +static void __exit tps65912_spi_exit(void) +{ + spi_unregister_driver(&tps65912_spi_driver); +} +module_exit(tps65912_spi_exit); + +MODULE_AUTHOR("Margarita Olaya "); +MODULE_DESCRIPTION("SPI support for TPS65912 chip family mfd"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/mfd/tps65912.h b/include/linux/mfd/tps65912.h new file mode 100644 index 00000000000..48d3b53316a --- /dev/null +++ b/include/linux/mfd/tps65912.h @@ -0,0 +1,321 @@ +/* + * tps65912.h -- TI TPS6591x + * + * Copyright 2011 Texas Instruments Inc. + * + * Author: Margarita Olaya + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __LINUX_MFD_TPS65912_H +#define __LINUX_MFD_TPS65912_H + +/* TPS regulator type list */ +#define REGULATOR_LDO 0 +#define REGULATOR_DCDC 1 + +/* + * List of registers for TPS65912 + */ + +#define TPS65912_DCDC1_CTRL 0x00 +#define TPS65912_DCDC2_CTRL 0x01 +#define TPS65912_DCDC3_CTRL 0x02 +#define TPS65912_DCDC4_CTRL 0x03 +#define TPS65912_DCDC1_OP 0x04 +#define TPS65912_DCDC1_AVS 0x05 +#define TPS65912_DCDC1_LIMIT 0x06 +#define TPS65912_DCDC2_OP 0x07 +#define TPS65912_DCDC2_AVS 0x08 +#define TPS65912_DCDC2_LIMIT 0x09 +#define TPS65912_DCDC3_OP 0x0A +#define TPS65912_DCDC3_AVS 0x0B +#define TPS65912_DCDC3_LIMIT 0x0C +#define TPS65912_DCDC4_OP 0x0D +#define TPS65912_DCDC4_AVS 0x0E +#define TPS65912_DCDC4_LIMIT 0x0F +#define TPS65912_LDO1_OP 0x10 +#define TPS65912_LDO1_AVS 0x11 +#define TPS65912_LDO1_LIMIT 0x12 +#define TPS65912_LDO2_OP 0x13 +#define TPS65912_LDO2_AVS 0x14 +#define TPS65912_LDO2_LIMIT 0x15 +#define TPS65912_LDO3_OP 0x16 +#define TPS65912_LDO3_AVS 0x17 +#define TPS65912_LDO3_LIMIT 0x18 +#define TPS65912_LDO4_OP 0x19 +#define TPS65912_LDO4_AVS 0x1A +#define TPS65912_LDO4_LIMIT 0x1B +#define TPS65912_LDO5 0x1C +#define TPS65912_LDO6 0x1D +#define TPS65912_LDO7 0x1E +#define TPS65912_LDO8 0x1F +#define TPS65912_LDO9 0x20 +#define TPS65912_LDO10 0x21 +#define TPS65912_THRM 0x22 +#define TPS65912_CLK32OUT 0x23 +#define TPS65912_DEVCTRL 0x24 +#define TPS65912_DEVCTRL2 0x25 +#define TPS65912_I2C_SPI_CFG 0x26 +#define TPS65912_KEEP_ON 0x27 +#define TPS65912_KEEP_ON2 0x28 +#define TPS65912_SET_OFF1 0x29 +#define TPS65912_SET_OFF2 0x2A +#define TPS65912_DEF_VOLT 0x2B +#define TPS65912_DEF_VOLT_MAPPING 0x2C +#define TPS65912_DISCHARGE 0x2D +#define TPS65912_DISCHARGE2 0x2E +#define TPS65912_EN1_SET1 0x2F +#define TPS65912_EN1_SET2 0x30 +#define TPS65912_EN2_SET1 0x31 +#define TPS65912_EN2_SET2 0x32 +#define TPS65912_EN3_SET1 0x33 +#define TPS65912_EN3_SET2 0x34 +#define TPS65912_EN4_SET1 0x35 +#define TPS65912_EN4_SET2 0x36 +#define TPS65912_PGOOD 0x37 +#define TPS65912_PGOOD2 0x38 +#define TPS65912_INT_STS 0x39 +#define TPS65912_INT_MSK 0x3A +#define TPS65912_INT_STS2 0x3B +#define TPS65912_INT_MSK2 0x3C +#define TPS65912_INT_STS3 0x3D +#define TPS65912_INT_MSK3 0x3E +#define TPS65912_INT_STS4 0x3F +#define TPS65912_INT_MSK4 0x40 +#define TPS65912_GPIO1 0x41 +#define TPS65912_GPIO2 0x42 +#define TPS65912_GPIO3 0x43 +#define TPS65912_GPIO4 0x44 +#define TPS65912_GPIO5 0x45 +#define TPS65912_VMON 0x46 +#define TPS65912_LEDA_CTRL1 0x47 +#define TPS65912_LEDA_CTRL2 0x48 +#define TPS65912_LEDA_CTRL3 0x49 +#define TPS65912_LEDA_CTRL4 0x4A +#define TPS65912_LEDA_CTRL5 0x4B +#define TPS65912_LEDA_CTRL6 0x4C +#define TPS65912_LEDA_CTRL7 0x4D +#define TPS65912_LEDA_CTRL8 0x4E +#define TPS65912_LEDB_CTRL1 0x4F +#define TPS65912_LEDB_CTRL2 0x50 +#define TPS65912_LEDB_CTRL3 0x51 +#define TPS65912_LEDB_CTRL4 0x52 +#define TPS65912_LEDB_CTRL5 0x53 +#define TPS65912_LEDB_CTRL6 0x54 +#define TPS65912_LEDB_CTRL7 0x55 +#define TPS65912_LEDB_CTRL8 0x56 +#define TPS65912_LEDC_CTRL1 0x57 +#define TPS65912_LEDC_CTRL2 0x58 +#define TPS65912_LEDC_CTRL3 0x59 +#define TPS65912_LEDC_CTRL4 0x5A +#define TPS65912_LEDC_CTRL5 0x5B +#define TPS65912_LEDC_CTRL6 0x5C +#define TPS65912_LEDC_CTRL7 0x5D +#define TPS65912_LEDC_CTRL8 0x5E +#define TPS65912_LED_RAMP_UP_TIME 0x5F +#define TPS65912_LED_RAMP_DOWN_TIME 0x60 +#define TPS65912_LED_SEQ_EN 0x61 +#define TPS65912_LOADSWITCH 0x62 +#define TPS65912_SPARE 0x63 +#define TPS65912_VERNUM 0x64 +#define TPS6591X_MAX_REGISTER 0x64 + +/* IRQ Definitions */ +#define TPS65912_IRQ_PWRHOLD_F 0 +#define TPS65912_IRQ_VMON 1 +#define TPS65912_IRQ_PWRON 2 +#define TPS65912_IRQ_PWRON_LP 3 +#define TPS65912_IRQ_PWRHOLD_R 4 +#define TPS65912_IRQ_HOTDIE 5 +#define TPS65912_IRQ_GPIO1_R 6 +#define TPS65912_IRQ_GPIO1_F 7 +#define TPS65912_IRQ_GPIO2_R 8 +#define TPS65912_IRQ_GPIO2_F 9 +#define TPS65912_IRQ_GPIO3_R 10 +#define TPS65912_IRQ_GPIO3_F 11 +#define TPS65912_IRQ_GPIO4_R 12 +#define TPS65912_IRQ_GPIO4_F 13 +#define TPS65912_IRQ_GPIO5_R 14 +#define TPS65912_IRQ_GPIO5_F 15 +#define TPS65912_IRQ_PGOOD_DCDC1 16 +#define TPS65912_IRQ_PGOOD_DCDC2 17 +#define TPS65912_IRQ_PGOOD_DCDC3 18 +#define TPS65912_IRQ_PGOOD_DCDC4 19 +#define TPS65912_IRQ_PGOOD_LDO1 20 +#define TPS65912_IRQ_PGOOD_LDO2 21 +#define TPS65912_IRQ_PGOOD_LDO3 22 +#define TPS65912_IRQ_PGOOD_LDO4 23 +#define TPS65912_IRQ_PGOOD_LDO5 24 +#define TPS65912_IRQ_PGOOD_LDO6 25 +#define TPS65912_IRQ_PGOOD_LDO7 26 +#define TPS65912_IRQ_PGOOD_LD08 27 +#define TPS65912_IRQ_PGOOD_LDO9 28 +#define TPS65912_IRQ_PGOOD_LDO10 29 + +#define TPS65912_NUM_IRQ 30 + +/* GPIO 1 and 2 Register Definitions */ +#define GPIO_SLEEP_MASK 0x80 +#define GPIO_SLEEP_SHIFT 7 +#define GPIO_DEB_MASK 0x10 +#define GPIO_DEB_SHIFT 4 +#define GPIO_CFG_MASK 0x04 +#define GPIO_CFG_SHIFT 2 +#define GPIO_STS_MASK 0x02 +#define GPIO_STS_SHIFT 1 +#define GPIO_SET_MASK 0x01 +#define GPIO_SET_SHIFT 0 + +/* GPIO 3 Register Definitions */ +#define GPIO3_SLEEP_MASK 0x80 +#define GPIO3_SLEEP_SHIFT 7 +#define GPIO3_SEL_MASK 0x40 +#define GPIO3_SEL_SHIFT 6 +#define GPIO3_ODEN_MASK 0x20 +#define GPIO3_ODEN_SHIFT 5 +#define GPIO3_DEB_MASK 0x10 +#define GPIO3_DEB_SHIFT 4 +#define GPIO3_PDEN_MASK 0x08 +#define GPIO3_PDEN_SHIFT 3 +#define GPIO3_CFG_MASK 0x04 +#define GPIO3_CFG_SHIFT 2 +#define GPIO3_STS_MASK 0x02 +#define GPIO3_STS_SHIFT 1 +#define GPIO3_SET_MASK 0x01 +#define GPIO3_SET_SHIFT 0 + +/* GPIO 4 Register Definitions */ +#define GPIO4_SLEEP_MASK 0x80 +#define GPIO4_SLEEP_SHIFT 7 +#define GPIO4_SEL_MASK 0x40 +#define GPIO4_SEL_SHIFT 6 +#define GPIO4_ODEN_MASK 0x20 +#define GPIO4_ODEN_SHIFT 5 +#define GPIO4_DEB_MASK 0x10 +#define GPIO4_DEB_SHIFT 4 +#define GPIO4_PDEN_MASK 0x08 +#define GPIO4_PDEN_SHIFT 3 +#define GPIO4_CFG_MASK 0x04 +#define GPIO4_CFG_SHIFT 2 +#define GPIO4_STS_MASK 0x02 +#define GPIO4_STS_SHIFT 1 +#define GPIO4_SET_MASK 0x01 +#define GPIO4_SET_SHIFT 0 + +/* Register THERM (0x80) register.RegisterDescription */ +#define THERM_THERM_HD_MASK 0x20 +#define THERM_THERM_HD_SHIFT 5 +#define THERM_THERM_TS_MASK 0x10 +#define THERM_THERM_TS_SHIFT 4 +#define THERM_THERM_HDSEL_MASK 0x0C +#define THERM_THERM_HDSEL_SHIFT 2 +#define THERM_RSVD1_MASK 0x02 +#define THERM_RSVD1_SHIFT 1 +#define THERM_THERM_STATE_MASK 0x01 +#define THERM_THERM_STATE_SHIFT 0 + +/* Register DCDCCTRL1 register.RegisterDescription */ +#define DCDCCTRL_VCON_ENABLE_MASK 0x80 +#define DCDCCTRL_VCON_ENABLE_SHIFT 7 +#define DCDCCTRL_VCON_RANGE1_MASK 0x40 +#define DCDCCTRL_VCON_RANGE1_SHIFT 6 +#define DCDCCTRL_VCON_RANGE0_MASK 0x20 +#define DCDCCTRL_VCON_RANGE0_SHIFT 5 +#define DCDCCTRL_TSTEP2_MASK 0x10 +#define DCDCCTRL_TSTEP2_SHIFT 4 +#define DCDCCTRL_TSTEP1_MASK 0x08 +#define DCDCCTRL_TSTEP1_SHIFT 3 +#define DCDCCTRL_TSTEP0_MASK 0x04 +#define DCDCCTRL_TSTEP0_SHIFT 2 +#define DCDCCTRL_DCDC1_MODE_MASK 0x02 +#define DCDCCTRL_DCDC1_MODE_SHIFT 1 + +/* Register DCDCCTRL2 and DCDCCTRL3 register.RegisterDescription */ +#define DCDCCTRL_TSTEP2_MASK 0x10 +#define DCDCCTRL_TSTEP2_SHIFT 4 +#define DCDCCTRL_TSTEP1_MASK 0x08 +#define DCDCCTRL_TSTEP1_SHIFT 3 +#define DCDCCTRL_TSTEP0_MASK 0x04 +#define DCDCCTRL_TSTEP0_SHIFT 2 +#define DCDCCTRL_DCDC_MODE_MASK 0x02 +#define DCDCCTRL_DCDC_MODE_SHIFT 1 +#define DCDCCTRL_RSVD0_MASK 0x01 +#define DCDCCTRL_RSVD0_SHIFT 0 + +/* Register DCDCCTRL4 register.RegisterDescription */ +#define DCDCCTRL_RAMP_TIME_MASK 0x01 +#define DCDCCTRL_RAMP_TIME_SHIFT 0 + +/* Register DCDCx_AVS */ +#define DCDC_AVS_ENABLE_MASK 0x80 +#define DCDC_AVS_ENABLE_SHIFT 7 +#define DCDC_AVS_ECO_MASK 0x40 +#define DCDC_AVS_ECO_SHIFT 6 + +/* Register DCDCx_LIMIT */ +#define DCDC_LIMIT_RANGE_MASK 0xC0 +#define DCDC_LIMIT_RANGE_SHIFT 6 +#define DCDC_LIMIT_MAX_SEL_MASK 0x3F +#define DCDC_LIMIT_MAX_SEL_SHIFT 0 + +/** + * struct tps65912_board + * Board platform dat may be used to initialize regulators. + */ +struct tps65912_board { + int is_dcdc1_avs; + int is_dcdc2_avs; + int is_dcdc3_avs; + int is_dcdc4_avs; + struct regulator_init_data *tps65912_pmic_init_data; +}; + +/** + * struct tps65912 - tps65912 sub-driver chip access routines + */ + +struct tps65912 { + struct device *dev; + /* for read/write acces */ + struct mutex io_mutex; + + /* For device IO interfaces: I2C or SPI */ + void *control_data; + + int (*read)(struct tps65912 *tps65912, u8 reg, int size, void *dest); + int (*write)(struct tps65912 *tps65912, u8 reg, int size, void *src); + + /* Client devices */ + struct tps65912_pmic *pmic; + + /* GPIO Handling */ + struct gpio_chip gpio; + + /* IRQ Handling */ + struct mutex irq_lock; + int chip_irq; + int irq_base; + int irq_num; + u32 irq_mask; +}; + +struct tps65912_platform_data { + int irq_base; +}; + +unsigned int tps_chip(void); + +int tps65912_set_bits(struct tps65912 *tps65912, u8 reg, u8 mask); +int tps65912_clear_bits(struct tps65912 *tps65912, u8 reg, u8 mask); +int tps65912_reg_read(struct tps65912 *tps65912, u8 reg); +int tps65912_reg_write(struct tps65912 *tps65912, u8 reg, u8 val); +int tps65912_device_init(struct tps65912 *tps65912); +void tps65912_device_exit(struct tps65912 *tps65912); + +#endif /* __LINUX_MFD_TPS65912_H */ -- cgit v1.2.3-70-g09d2 From d49a0f3f14a763242b71244019d7881ee06e0658 Mon Sep 17 00:00:00 2001 From: Margarita Olaya Date: Thu, 9 Jun 2011 14:50:13 -0500 Subject: tps65912: irq: add interrupt controller This module controls the interrupt handling for the tps65912. The interrupt sources can be the following: - GPIO - PWRON signal - PWRHOLD signal - Temperature detection Signed-off-by: Margarita Olaya Cabrera Acked-by: Samuel Ortiz Acked-by: Liam Girdwood Signed-off-by: Samuel Ortiz --- drivers/mfd/Makefile | 2 +- drivers/mfd/tps65912-core.c | 13 +++ drivers/mfd/tps65912-irq.c | 224 +++++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/tps65912.h | 5 + 4 files changed, 243 insertions(+), 1 deletion(-) create mode 100644 drivers/mfd/tps65912-irq.c (limited to 'drivers/mfd') diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index c9925e5dad9..1d593b9085b 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -36,7 +36,7 @@ obj-$(CONFIG_MFD_WM8994) += wm8994-core.o wm8994-irq.o obj-$(CONFIG_TPS6105X) += tps6105x.o obj-$(CONFIG_TPS65010) += tps65010.o obj-$(CONFIG_TPS6507X) += tps6507x.o -tps65912-objs := tps65912-core.o +tps65912-objs := tps65912-core.o tps65912-irq.o obj-$(CONFIG_MFD_TPS65912) += tps65912.o obj-$(CONFIG_MFD_TPS65912_I2C) += tps65912-i2c.o obj-$(CONFIG_MFD_TPS65912_SPI) += tps65912-spi.o diff --git a/drivers/mfd/tps65912-core.c b/drivers/mfd/tps65912-core.c index 10baf765554..955bc00e4b2 100644 --- a/drivers/mfd/tps65912-core.c +++ b/drivers/mfd/tps65912-core.c @@ -124,8 +124,16 @@ EXPORT_SYMBOL_GPL(tps65912_reg_write); int tps65912_device_init(struct tps65912 *tps65912) { struct tps65912_board *pmic_plat_data = tps65912->dev->platform_data; + struct tps65912_platform_data *init_data; int ret, dcdc_avs, value; + init_data = kzalloc(sizeof(struct tps65912_platform_data), GFP_KERNEL); + if (init_data == NULL) + return -ENOMEM; + + init_data->irq = pmic_plat_data->irq; + init_data->irq_base = pmic_plat_data->irq; + mutex_init(&tps65912->io_mutex); dev_set_drvdata(tps65912->dev, tps65912); @@ -145,9 +153,14 @@ int tps65912_device_init(struct tps65912 *tps65912) if (ret < 0) goto err; + ret = tps65912_irq_init(tps65912, init_data->irq, init_data); + if (ret < 0) + goto err; + return ret; err: + kfree(init_data); mfd_remove_devices(tps65912->dev); kfree(tps65912); return ret; diff --git a/drivers/mfd/tps65912-irq.c b/drivers/mfd/tps65912-irq.c new file mode 100644 index 00000000000..d360a83a273 --- /dev/null +++ b/drivers/mfd/tps65912-irq.c @@ -0,0 +1,224 @@ +/* + * tps65912-irq.c -- TI TPS6591x + * + * Copyright 2011 Texas Instruments Inc. + * + * Author: Margarita Olaya + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This driver is based on wm8350 implementation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static inline int irq_to_tps65912_irq(struct tps65912 *tps65912, + int irq) +{ + return irq - tps65912->irq_base; +} + +/* + * This is a threaded IRQ handler so can access I2C/SPI. Since the + * IRQ handler explicitly clears the IRQ it handles the IRQ line + * will be reasserted and the physical IRQ will be handled again if + * another interrupt is asserted while we run - in the normal course + * of events this is a rare occurrence so we save I2C/SPI reads. We're + * also assuming that it's rare to get lots of interrupts firing + * simultaneously so try to minimise I/O. + */ +static irqreturn_t tps65912_irq(int irq, void *irq_data) +{ + struct tps65912 *tps65912 = irq_data; + u32 irq_sts; + u32 irq_mask; + u8 reg; + int i; + + + tps65912->read(tps65912, TPS65912_INT_STS, 1, ®); + irq_sts = reg; + tps65912->read(tps65912, TPS65912_INT_STS2, 1, ®); + irq_sts |= reg << 8; + tps65912->read(tps65912, TPS65912_INT_STS3, 1, ®); + irq_sts |= reg << 16; + tps65912->read(tps65912, TPS65912_INT_STS4, 1, ®); + irq_sts |= reg << 24; + + tps65912->read(tps65912, TPS65912_INT_MSK, 1, ®); + irq_mask = reg; + tps65912->read(tps65912, TPS65912_INT_MSK2, 1, ®); + irq_mask |= reg << 8; + tps65912->read(tps65912, TPS65912_INT_MSK3, 1, ®); + irq_mask |= reg << 16; + tps65912->read(tps65912, TPS65912_INT_MSK4, 1, ®); + irq_mask |= reg << 24; + + irq_sts &= ~irq_mask; + if (!irq_sts) + return IRQ_NONE; + + for (i = 0; i < tps65912->irq_num; i++) { + if (!(irq_sts & (1 << i))) + continue; + + handle_nested_irq(tps65912->irq_base + i); + } + + /* Write the STS register back to clear IRQs we handled */ + reg = irq_sts & 0xFF; + irq_sts >>= 8; + if (reg) + tps65912->write(tps65912, TPS65912_INT_STS, 1, ®); + reg = irq_sts & 0xFF; + irq_sts >>= 8; + if (reg) + tps65912->write(tps65912, TPS65912_INT_STS2, 1, ®); + reg = irq_sts & 0xFF; + irq_sts >>= 8; + if (reg) + tps65912->write(tps65912, TPS65912_INT_STS3, 1, ®); + reg = irq_sts & 0xFF; + if (reg) + tps65912->write(tps65912, TPS65912_INT_STS4, 1, ®); + + return IRQ_HANDLED; +} + +static void tps65912_irq_lock(struct irq_data *data) +{ + struct tps65912 *tps65912 = irq_data_get_irq_chip_data(data); + + mutex_lock(&tps65912->irq_lock); +} + +static void tps65912_irq_sync_unlock(struct irq_data *data) +{ + struct tps65912 *tps65912 = irq_data_get_irq_chip_data(data); + u32 reg_mask; + u8 reg; + + tps65912->read(tps65912, TPS65912_INT_MSK, 1, ®); + reg_mask = reg; + tps65912->read(tps65912, TPS65912_INT_MSK2, 1, ®); + reg_mask |= reg << 8; + tps65912->read(tps65912, TPS65912_INT_MSK3, 1, ®); + reg_mask |= reg << 16; + tps65912->read(tps65912, TPS65912_INT_MSK4, 1, ®); + reg_mask |= reg << 24; + + if (tps65912->irq_mask != reg_mask) { + reg = tps65912->irq_mask & 0xFF; + tps65912->write(tps65912, TPS65912_INT_MSK, 1, ®); + reg = tps65912->irq_mask >> 8 & 0xFF; + tps65912->write(tps65912, TPS65912_INT_MSK2, 1, ®); + reg = tps65912->irq_mask >> 16 & 0xFF; + tps65912->write(tps65912, TPS65912_INT_MSK3, 1, ®); + reg = tps65912->irq_mask >> 24 & 0xFF; + tps65912->write(tps65912, TPS65912_INT_MSK4, 1, ®); + } + + mutex_unlock(&tps65912->irq_lock); +} + +static void tps65912_irq_enable(struct irq_data *data) +{ + struct tps65912 *tps65912 = irq_data_get_irq_chip_data(data); + + tps65912->irq_mask &= ~(1 << irq_to_tps65912_irq(tps65912, data->irq)); +} + +static void tps65912_irq_disable(struct irq_data *data) +{ + struct tps65912 *tps65912 = irq_data_get_irq_chip_data(data); + + tps65912->irq_mask |= (1 << irq_to_tps65912_irq(tps65912, data->irq)); +} + +static struct irq_chip tps65912_irq_chip = { + .name = "tps65912", + .irq_bus_lock = tps65912_irq_lock, + .irq_bus_sync_unlock = tps65912_irq_sync_unlock, + .irq_disable = tps65912_irq_disable, + .irq_enable = tps65912_irq_enable, +}; + +int tps65912_irq_init(struct tps65912 *tps65912, int irq, + struct tps65912_platform_data *pdata) +{ + int ret, cur_irq; + int flags = IRQF_ONESHOT; + u8 reg; + + if (!irq) { + dev_warn(tps65912->dev, "No interrupt support, no core IRQ\n"); + return 0; + } + + if (!pdata || !pdata->irq_base) { + dev_warn(tps65912->dev, "No interrupt support, no IRQ base\n"); + return 0; + } + + /* Clear unattended interrupts */ + tps65912->read(tps65912, TPS65912_INT_STS, 1, ®); + tps65912->write(tps65912, TPS65912_INT_STS, 1, ®); + tps65912->read(tps65912, TPS65912_INT_STS2, 1, ®); + tps65912->write(tps65912, TPS65912_INT_STS2, 1, ®); + tps65912->read(tps65912, TPS65912_INT_STS3, 1, ®); + tps65912->write(tps65912, TPS65912_INT_STS3, 1, ®); + tps65912->read(tps65912, TPS65912_INT_STS4, 1, ®); + tps65912->write(tps65912, TPS65912_INT_STS4, 1, ®); + + /* Mask top level interrupts */ + tps65912->irq_mask = 0xFFFFFFFF; + + mutex_init(&tps65912->irq_lock); + tps65912->chip_irq = irq; + tps65912->irq_base = pdata->irq_base; + + tps65912->irq_num = TPS65912_NUM_IRQ; + + /* Register with genirq */ + for (cur_irq = tps65912->irq_base; + cur_irq < tps65912->irq_num + tps65912->irq_base; + cur_irq++) { + irq_set_chip_data(cur_irq, tps65912); + irq_set_chip_and_handler(cur_irq, &tps65912_irq_chip, + handle_edge_irq); + irq_set_nested_thread(cur_irq, 1); + /* ARM needs us to explicitly flag the IRQ as valid + * and will set them noprobe when we do so. */ +#ifdef CONFIG_ARM + set_irq_flags(cur_irq, IRQF_VALID); +#else + irq_set_noprobe(cur_irq); +#endif + } + + ret = request_threaded_irq(irq, NULL, tps65912_irq, flags, + "tps65912", tps65912); + + irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW); + if (ret != 0) + dev_err(tps65912->dev, "Failed to request IRQ: %d\n", ret); + + return ret; +} + +int tps65912_irq_exit(struct tps65912 *tps65912) +{ + free_irq(tps65912->chip_irq, tps65912); + return 0; +} diff --git a/include/linux/mfd/tps65912.h b/include/linux/mfd/tps65912.h index 48d3b53316a..be60fb23b58 100644 --- a/include/linux/mfd/tps65912.h +++ b/include/linux/mfd/tps65912.h @@ -273,6 +273,8 @@ struct tps65912_board { int is_dcdc2_avs; int is_dcdc3_avs; int is_dcdc4_avs; + int irq; + int irq_base; struct regulator_init_data *tps65912_pmic_init_data; }; @@ -306,6 +308,7 @@ struct tps65912 { }; struct tps65912_platform_data { + int irq; int irq_base; }; @@ -317,5 +320,7 @@ int tps65912_reg_read(struct tps65912 *tps65912, u8 reg); int tps65912_reg_write(struct tps65912 *tps65912, u8 reg, u8 val); int tps65912_device_init(struct tps65912 *tps65912); void tps65912_device_exit(struct tps65912 *tps65912); +int tps65912_irq_init(struct tps65912 *tps65912, int irq, + struct tps65912_platform_data *pdata); #endif /* __LINUX_MFD_TPS65912_H */ -- cgit v1.2.3-70-g09d2 From 5cef8df5e335a5bc9147c5cafdce348981f5c5b5 Mon Sep 17 00:00:00 2001 From: Robert Rosengren Date: Thu, 9 Jun 2011 23:57:33 +0200 Subject: mfd: ab8500-core MFD devices marked as initdata Internal MFD device structs are marked as __devinitdata since the kernel will allocate memory for the same when calling mfd_add_devices. Signed-off-by: Robert Rosengren Reviewed-by: Mattias Wallin Reviewed-by: Johan Palsson Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz --- drivers/mfd/ab8500-core.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index fc0c1af1566..1fc6be8cb85 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -363,7 +363,7 @@ static void ab8500_irq_remove(struct ab8500 *ab8500) } } -static struct resource ab8500_gpio_resources[] = { +static struct resource __devinitdata ab8500_gpio_resources[] = { { .name = "GPIO_INT6", .start = AB8500_INT_GPIO6R, @@ -372,7 +372,7 @@ static struct resource ab8500_gpio_resources[] = { } }; -static struct resource ab8500_gpadc_resources[] = { +static struct resource __devinitdata ab8500_gpadc_resources[] = { { .name = "HW_CONV_END", .start = AB8500_INT_GP_HW_ADC_CONV_END, @@ -387,7 +387,7 @@ static struct resource ab8500_gpadc_resources[] = { }, }; -static struct resource ab8500_rtc_resources[] = { +static struct resource __devinitdata ab8500_rtc_resources[] = { { .name = "60S", .start = AB8500_INT_RTC_60S, @@ -402,7 +402,7 @@ static struct resource ab8500_rtc_resources[] = { }, }; -static struct resource ab8500_poweronkey_db_resources[] = { +static struct resource __devinitdata ab8500_poweronkey_db_resources[] = { { .name = "ONKEY_DBF", .start = AB8500_INT_PON_KEY1DB_F, @@ -417,7 +417,7 @@ static struct resource ab8500_poweronkey_db_resources[] = { }, }; -static struct resource ab8500_bm_resources[] = { +static struct resource __devinitdata ab8500_bm_resources[] = { { .name = "MAIN_EXT_CH_NOT_OK", .start = AB8500_INT_MAIN_EXT_CH_NOT_OK, @@ -534,7 +534,7 @@ static struct resource ab8500_bm_resources[] = { }, }; -static struct resource ab8500_debug_resources[] = { +static struct resource __devinitdata ab8500_debug_resources[] = { { .name = "IRQ_FIRST", .start = AB8500_INT_MAIN_EXT_CH_NOT_OK, @@ -549,7 +549,7 @@ static struct resource ab8500_debug_resources[] = { }, }; -static struct resource ab8500_usb_resources[] = { +static struct resource __devinitdata ab8500_usb_resources[] = { { .name = "ID_WAKEUP_R", .start = AB8500_INT_ID_WAKEUP_R, @@ -582,7 +582,7 @@ static struct resource ab8500_usb_resources[] = { }, }; -static struct resource ab8500_temp_resources[] = { +static struct resource __devinitdata ab8500_temp_resources[] = { { .name = "AB8500_TEMP_WARM", .start = AB8500_INT_TEMP_WARM, @@ -591,7 +591,7 @@ static struct resource ab8500_temp_resources[] = { }, }; -static struct mfd_cell ab8500_devs[] = { +static struct mfd_cell __devinitdata ab8500_devs[] = { #ifdef CONFIG_DEBUG_FS { .name = "ab8500-debug", -- cgit v1.2.3-70-g09d2 From 6af75ecd5772eee4d7be974a881fd5a25f218b0b Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 9 Jun 2011 23:57:45 +0200 Subject: mfd: Update ab8500 subdevice list This synchronize the subdevice entries for the AB8500 MFD driver with the latest development of subdrivers for things like battery charging and temperature monitoring. Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz --- drivers/mfd/ab8500-core.c | 215 +++++++++++++++++++++++++++++++++++----------- 1 file changed, 166 insertions(+), 49 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 1fc6be8cb85..387705e494b 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -417,19 +417,46 @@ static struct resource __devinitdata ab8500_poweronkey_db_resources[] = { }, }; -static struct resource __devinitdata ab8500_bm_resources[] = { +static struct resource __devinitdata ab8500_av_acc_detect_resources[] = { { - .name = "MAIN_EXT_CH_NOT_OK", - .start = AB8500_INT_MAIN_EXT_CH_NOT_OK, - .end = AB8500_INT_MAIN_EXT_CH_NOT_OK, - .flags = IORESOURCE_IRQ, + .name = "ACC_DETECT_1DB_F", + .start = AB8500_INT_ACC_DETECT_1DB_F, + .end = AB8500_INT_ACC_DETECT_1DB_F, + .flags = IORESOURCE_IRQ, }, { - .name = "BATT_OVV", - .start = AB8500_INT_BATT_OVV, - .end = AB8500_INT_BATT_OVV, - .flags = IORESOURCE_IRQ, + .name = "ACC_DETECT_1DB_R", + .start = AB8500_INT_ACC_DETECT_1DB_R, + .end = AB8500_INT_ACC_DETECT_1DB_R, + .flags = IORESOURCE_IRQ, + }, + { + .name = "ACC_DETECT_21DB_F", + .start = AB8500_INT_ACC_DETECT_21DB_F, + .end = AB8500_INT_ACC_DETECT_21DB_F, + .flags = IORESOURCE_IRQ, + }, + { + .name = "ACC_DETECT_21DB_R", + .start = AB8500_INT_ACC_DETECT_21DB_R, + .end = AB8500_INT_ACC_DETECT_21DB_R, + .flags = IORESOURCE_IRQ, + }, + { + .name = "ACC_DETECT_22DB_F", + .start = AB8500_INT_ACC_DETECT_22DB_F, + .end = AB8500_INT_ACC_DETECT_22DB_F, + .flags = IORESOURCE_IRQ, }, + { + .name = "ACC_DETECT_22DB_R", + .start = AB8500_INT_ACC_DETECT_22DB_R, + .end = AB8500_INT_ACC_DETECT_22DB_R, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource __devinitdata ab8500_charger_resources[] = { { .name = "MAIN_CH_UNPLUG_DET", .start = AB8500_INT_MAIN_CH_UNPLUG_DET, @@ -442,12 +469,6 @@ static struct resource __devinitdata ab8500_bm_resources[] = { .end = AB8500_INT_MAIN_CH_PLUG_DET, .flags = IORESOURCE_IRQ, }, - { - .name = "VBUS_DET_F", - .start = AB8500_INT_VBUS_DET_F, - .end = AB8500_INT_VBUS_DET_F, - .flags = IORESOURCE_IRQ, - }, { .name = "VBUS_DET_R", .start = AB8500_INT_VBUS_DET_R, @@ -455,15 +476,21 @@ static struct resource __devinitdata ab8500_bm_resources[] = { .flags = IORESOURCE_IRQ, }, { - .name = "BAT_CTRL_INDB", - .start = AB8500_INT_BAT_CTRL_INDB, - .end = AB8500_INT_BAT_CTRL_INDB, + .name = "VBUS_DET_F", + .start = AB8500_INT_VBUS_DET_F, + .end = AB8500_INT_VBUS_DET_F, .flags = IORESOURCE_IRQ, }, { - .name = "CH_WD_EXP", - .start = AB8500_INT_CH_WD_EXP, - .end = AB8500_INT_CH_WD_EXP, + .name = "USB_LINK_STATUS", + .start = AB8500_INT_USB_LINK_STATUS, + .end = AB8500_INT_USB_LINK_STATUS, + .flags = IORESOURCE_IRQ, + }, + { + .name = "USB_CHARGE_DET_DONE", + .start = AB8500_INT_USB_CHG_DET_DONE, + .end = AB8500_INT_USB_CHG_DET_DONE, .flags = IORESOURCE_IRQ, }, { @@ -473,21 +500,60 @@ static struct resource __devinitdata ab8500_bm_resources[] = { .flags = IORESOURCE_IRQ, }, { - .name = "NCONV_ACCU", - .start = AB8500_INT_CCN_CONV_ACC, - .end = AB8500_INT_CCN_CONV_ACC, + .name = "USB_CH_TH_PROT_R", + .start = AB8500_INT_USB_CH_TH_PROT_R, + .end = AB8500_INT_USB_CH_TH_PROT_R, .flags = IORESOURCE_IRQ, }, { - .name = "LOW_BAT_F", - .start = AB8500_INT_LOW_BAT_F, - .end = AB8500_INT_LOW_BAT_F, + .name = "USB_CH_TH_PROT_F", + .start = AB8500_INT_USB_CH_TH_PROT_F, + .end = AB8500_INT_USB_CH_TH_PROT_F, .flags = IORESOURCE_IRQ, }, { - .name = "LOW_BAT_R", - .start = AB8500_INT_LOW_BAT_R, - .end = AB8500_INT_LOW_BAT_R, + .name = "MAIN_EXT_CH_NOT_OK", + .start = AB8500_INT_MAIN_EXT_CH_NOT_OK, + .end = AB8500_INT_MAIN_EXT_CH_NOT_OK, + .flags = IORESOURCE_IRQ, + }, + { + .name = "MAIN_CH_TH_PROT_R", + .start = AB8500_INT_MAIN_CH_TH_PROT_R, + .end = AB8500_INT_MAIN_CH_TH_PROT_R, + .flags = IORESOURCE_IRQ, + }, + { + .name = "MAIN_CH_TH_PROT_F", + .start = AB8500_INT_MAIN_CH_TH_PROT_F, + .end = AB8500_INT_MAIN_CH_TH_PROT_F, + .flags = IORESOURCE_IRQ, + }, + { + .name = "USB_CHARGER_NOT_OKR", + .start = AB8500_INT_USB_CHARGER_NOT_OK, + .end = AB8500_INT_USB_CHARGER_NOT_OK, + .flags = IORESOURCE_IRQ, + }, + { + .name = "USB_CHARGER_NOT_OKF", + .start = AB8500_INT_USB_CHARGER_NOT_OKF, + .end = AB8500_INT_USB_CHARGER_NOT_OKF, + .flags = IORESOURCE_IRQ, + }, + { + .name = "CH_WD_EXP", + .start = AB8500_INT_CH_WD_EXP, + .end = AB8500_INT_CH_WD_EXP, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource __devinitdata ab8500_btemp_resources[] = { + { + .name = "BAT_CTRL_INDB", + .start = AB8500_INT_BAT_CTRL_INDB, + .end = AB8500_INT_BAT_CTRL_INDB, .flags = IORESOURCE_IRQ, }, { @@ -503,37 +569,54 @@ static struct resource __devinitdata ab8500_bm_resources[] = { .flags = IORESOURCE_IRQ, }, { - .name = "USB_CHARGER_NOT_OKR", - .start = AB8500_INT_USB_CHARGER_NOT_OK, - .end = AB8500_INT_USB_CHARGER_NOT_OK, + .name = "BTEMP_LOW_MEDIUM", + .start = AB8500_INT_BTEMP_LOW_MEDIUM, + .end = AB8500_INT_BTEMP_LOW_MEDIUM, .flags = IORESOURCE_IRQ, }, { - .name = "USB_CHARGE_DET_DONE", - .start = AB8500_INT_USB_CHG_DET_DONE, - .end = AB8500_INT_USB_CHG_DET_DONE, + .name = "BTEMP_MEDIUM_HIGH", + .start = AB8500_INT_BTEMP_MEDIUM_HIGH, + .end = AB8500_INT_BTEMP_MEDIUM_HIGH, .flags = IORESOURCE_IRQ, }, +}; + +static struct resource __devinitdata ab8500_fg_resources[] = { { - .name = "USB_CH_TH_PROT_R", - .start = AB8500_INT_USB_CH_TH_PROT_R, - .end = AB8500_INT_USB_CH_TH_PROT_R, + .name = "NCONV_ACCU", + .start = AB8500_INT_CCN_CONV_ACC, + .end = AB8500_INT_CCN_CONV_ACC, .flags = IORESOURCE_IRQ, }, { - .name = "MAIN_CH_TH_PROT_R", - .start = AB8500_INT_MAIN_CH_TH_PROT_R, - .end = AB8500_INT_MAIN_CH_TH_PROT_R, + .name = "BATT_OVV", + .start = AB8500_INT_BATT_OVV, + .end = AB8500_INT_BATT_OVV, .flags = IORESOURCE_IRQ, }, { - .name = "USB_CHARGER_NOT_OKF", - .start = AB8500_INT_USB_CHARGER_NOT_OKF, - .end = AB8500_INT_USB_CHARGER_NOT_OKF, + .name = "LOW_BAT_F", + .start = AB8500_INT_LOW_BAT_F, + .end = AB8500_INT_LOW_BAT_F, + .flags = IORESOURCE_IRQ, + }, + { + .name = "LOW_BAT_R", + .start = AB8500_INT_LOW_BAT_R, + .end = AB8500_INT_LOW_BAT_R, + .flags = IORESOURCE_IRQ, + }, + { + .name = "CC_INT_CALIB", + .start = AB8500_INT_CC_INT_CALIB, + .end = AB8500_INT_CC_INT_CALIB, .flags = IORESOURCE_IRQ, }, }; +static struct resource __devinitdata ab8500_chargalg_resources[] = {}; + static struct resource __devinitdata ab8500_debug_resources[] = { { .name = "IRQ_FIRST", @@ -580,6 +663,18 @@ static struct resource __devinitdata ab8500_usb_resources[] = { .end = AB8500_INT_USB_LINK_STATUS, .flags = IORESOURCE_IRQ, }, + { + .name = "USB_ADP_PROBE_PLUG", + .start = AB8500_INT_ADP_PROBE_PLUG, + .end = AB8500_INT_ADP_PROBE_PLUG, + .flags = IORESOURCE_IRQ, + }, + { + .name = "USB_ADP_PROBE_UNPLUG", + .start = AB8500_INT_ADP_PROBE_UNPLUG, + .end = AB8500_INT_ADP_PROBE_UNPLUG, + .flags = IORESOURCE_IRQ, + }, }; static struct resource __devinitdata ab8500_temp_resources[] = { @@ -621,11 +716,33 @@ static struct mfd_cell __devinitdata ab8500_devs[] = { .resources = ab8500_rtc_resources, }, { - .name = "ab8500-bm", - .num_resources = ARRAY_SIZE(ab8500_bm_resources), - .resources = ab8500_bm_resources, + .name = "ab8500-charger", + .num_resources = ARRAY_SIZE(ab8500_charger_resources), + .resources = ab8500_charger_resources, + }, + { + .name = "ab8500-btemp", + .num_resources = ARRAY_SIZE(ab8500_btemp_resources), + .resources = ab8500_btemp_resources, + }, + { + .name = "ab8500-fg", + .num_resources = ARRAY_SIZE(ab8500_fg_resources), + .resources = ab8500_fg_resources, + }, + { + .name = "ab8500-chargalg", + .num_resources = ARRAY_SIZE(ab8500_chargalg_resources), + .resources = ab8500_chargalg_resources, + }, + { + .name = "ab8500-acc-det", + .num_resources = ARRAY_SIZE(ab8500_av_acc_detect_resources), + .resources = ab8500_av_acc_detect_resources, + }, + { + .name = "ab8500-codec", }, - { .name = "ab8500-codec", }, { .name = "ab8500-usb", .num_resources = ARRAY_SIZE(ab8500_usb_resources), -- cgit v1.2.3-70-g09d2 From 19921ef61217fff600202b819c05bb078f254619 Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Thu, 16 Jun 2011 13:05:49 +0200 Subject: mfd: Add tunnelcreek watchdog to lpc_sch devices Tunnel Creek has an additional watchdog core. Signed-off-by: Alexander Stein Signed-off-by: Samuel Ortiz --- drivers/mfd/lpc_sch.c | 49 ++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 48 insertions(+), 1 deletion(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/lpc_sch.c b/drivers/mfd/lpc_sch.c index ea3f52c07ef..ea1169b0477 100644 --- a/drivers/mfd/lpc_sch.c +++ b/drivers/mfd/lpc_sch.c @@ -37,6 +37,9 @@ #define GPIOBASE 0x44 #define GPIO_IO_SIZE 64 +#define WDTBASE 0x84 +#define WDT_IO_SIZE 64 + static struct resource smbus_sch_resource = { .flags = IORESOURCE_IO, }; @@ -59,6 +62,18 @@ static struct mfd_cell lpc_sch_cells[] = { }, }; +static struct resource wdt_sch_resource = { + .flags = IORESOURCE_IO, +}; + +static struct mfd_cell tunnelcreek_cells[] = { + { + .name = "tunnelcreek_wdt", + .num_resources = 1, + .resources = &wdt_sch_resource, + }, +}; + static struct pci_device_id lpc_sch_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SCH_LPC) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ITC_LPC) }, @@ -72,6 +87,7 @@ static int __devinit lpc_sch_probe(struct pci_dev *dev, unsigned int base_addr_cfg; unsigned short base_addr; int i; + int ret; pci_read_config_dword(dev, SMBASE, &base_addr_cfg); if (!(base_addr_cfg & (1 << 31))) { @@ -104,8 +120,39 @@ static int __devinit lpc_sch_probe(struct pci_dev *dev, for (i=0; i < ARRAY_SIZE(lpc_sch_cells); i++) lpc_sch_cells[i].id = id->device; - return mfd_add_devices(&dev->dev, 0, + ret = mfd_add_devices(&dev->dev, 0, lpc_sch_cells, ARRAY_SIZE(lpc_sch_cells), NULL, 0); + if (ret) + goto out_dev; + + if (id->device == PCI_DEVICE_ID_INTEL_ITC_LPC) { + pci_read_config_dword(dev, WDTBASE, &base_addr_cfg); + if (!(base_addr_cfg & (1 << 31))) { + dev_err(&dev->dev, "Decode of the WDT I/O range disabled\n"); + ret = -ENODEV; + goto out_dev; + } + base_addr = (unsigned short)base_addr_cfg; + if (base_addr == 0) { + dev_err(&dev->dev, "I/O space for WDT uninitialized\n"); + ret = -ENODEV; + goto out_dev; + } + + wdt_sch_resource.start = base_addr; + wdt_sch_resource.end = base_addr + WDT_IO_SIZE - 1; + + for (i = 0; i < ARRAY_SIZE(tunnelcreek_cells); i++) + tunnelcreek_cells[i].id = id->device; + + ret = mfd_add_devices(&dev->dev, 0, tunnelcreek_cells, + ARRAY_SIZE(tunnelcreek_cells), NULL, 0); + } + + return ret; +out_dev: + mfd_remove_devices(&dev->dev); + return ret; } static void __devexit lpc_sch_remove(struct pci_dev *dev) -- cgit v1.2.3-70-g09d2 From ec2328c30bf09fe31e77889090eeb1a965325f53 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 20 Jun 2011 11:47:55 +0100 Subject: mfd: Implement tps65910 IRQ cleanup The tps65910_irq_exit() cleanup function was generating a warning from sparse due to the lack of a prototype. This wasn't causing GCC warnings as the driver wasn't cleaning up its IRQs on exit at all so there was no use of an unprototyped function. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/tps65910.c | 1 + include/linux/mfd/tps65910.h | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers/mfd') diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c index 2229e66d80d..837f0e6fbf0 100644 --- a/drivers/mfd/tps65910.c +++ b/drivers/mfd/tps65910.c @@ -187,6 +187,7 @@ static int tps65910_i2c_remove(struct i2c_client *i2c) struct tps65910 *tps65910 = i2c_get_clientdata(i2c); mfd_remove_devices(tps65910->dev); + tps65910_irq_exit(tps65910); kfree(tps65910); return 0; diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index 73572c65d04..82b4c8801a4 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -791,6 +791,7 @@ int tps65910_clear_bits(struct tps65910 *tps65910, u8 reg, u8 mask); void tps65910_gpio_init(struct tps65910 *tps65910, int gpio_base); int tps65910_irq_init(struct tps65910 *tps65910, int irq, struct tps65910_platform_data *pdata); +int tps65910_irq_exit(struct tps65910 *tps65910); static inline int tps65910_chip_id(struct tps65910 *tps65910) { -- cgit v1.2.3-70-g09d2 From b00cd68eb3f6c81525e43f6259b65665ef32499a Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 20 Jun 2011 12:25:58 +0100 Subject: mfd: Ensure value written by wm831x_set_bits() is within the mask Purely for defensiveness. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm831x-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c index 772fe584f3b..baae9e47bff 100644 --- a/drivers/mfd/wm831x-core.c +++ b/drivers/mfd/wm831x-core.c @@ -295,7 +295,7 @@ int wm831x_set_bits(struct wm831x *wm831x, unsigned short reg, goto out; r &= ~mask; - r |= val; + r |= val & mask; ret = wm831x_write(wm831x, reg, 2, &r); -- cgit v1.2.3-70-g09d2 From 59dead5a0c65abed0fe997a69692c11fcd0b11ca Mon Sep 17 00:00:00 2001 From: Oleg Drokin Date: Fri, 1 Jul 2011 13:34:13 +0200 Subject: mfd: Add tps65921 support from twl-core Very similar to TPS65920 List of differences: http://www.ti.com/litv/pdf/swcu066b Signed-off-by: Oleg Drokin Signed-off-by: Samuel Ortiz --- drivers/mfd/twl-core.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/mfd') diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index a2eddc70995..01ecfeee652 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -1283,6 +1283,8 @@ static const struct i2c_device_id twl_ids[] = { { "tps65950", 0 }, /* catalog version of twl5030 */ { "tps65930", TPS_SUBSET }, /* fewer LDOs and DACs; no charger */ { "tps65920", TPS_SUBSET }, /* fewer LDOs; no codec or charger */ + { "tps65921", TPS_SUBSET }, /* fewer LDOs; no codec, no LED + and vibrator. Charger in USB module*/ { "twl6030", TWL6030_CLASS }, /* "Phoenix power chip" */ { "twl6025", TWL6030_CLASS | TWL6025_SUBCLASS }, /* "Phoenix lite" */ { /* end of list */ }, -- cgit v1.2.3-70-g09d2 From 08256712a2705f3ced3e54c3728932c9c39b58ad Mon Sep 17 00:00:00 2001 From: Dimitris Papastamos Date: Wed, 22 Jun 2011 00:23:08 +0100 Subject: mfd: Fix off by one in WM831x IRQ code The GPIO IRQs aren't the first IRQs defined, we need to subtract the base for the GPIOs as well to use them for array indexes. Signed-off-by: Dimitris Papastamos Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm831x-irq.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/mfd') diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c index 1808deb8083..6c3408ca2c2 100644 --- a/drivers/mfd/wm831x-irq.c +++ b/drivers/mfd/wm831x-irq.c @@ -408,6 +408,11 @@ static int wm831x_irq_set_type(struct irq_data *data, unsigned int type) return -EINVAL; } + /* Rebase the IRQ into the GPIO range so we've got a sensible array + * index. + */ + irq -= WM831X_IRQ_GPIO_1; + /* We set the high bit to flag that we need an update; don't * do the update here as we can be called with the bus lock * held. -- cgit v1.2.3-70-g09d2 From 5608801baf0ffd06a428de3496fa10b3b7d789e9 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 22 Jun 2011 14:53:58 +0100 Subject: mfd: Don't ask about the TPS65912 core driver in Kconfig The user has to select the I2C and SPI drivers individually and they select the core driver for the device so there's no point in presenting the user with an option for the core driver. Signed-off-by: Mark Brown Acked-by: Randy Dunlap Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index f94036a4f33..3695a078bae 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -172,7 +172,7 @@ config MFD_TPS6586X will be called tps6586x. config MFD_TPS65912 - bool "TPS65912 PMIC" + bool depends on GPIOLIB config MFD_TPS65912_I2C -- cgit v1.2.3-70-g09d2 From 2f2233413a7aab688e6484abf0941f8ca34da1bd Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 23 Jun 2011 10:19:16 +0800 Subject: mfd: Remove comp{1,2}_threshold sysfs entries in tps65911_comparator_remove Signed-off-by: Axel Lin Signed-off-by: Samuel Ortiz --- drivers/mfd/tps65911-comparator.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/mfd') diff --git a/drivers/mfd/tps65911-comparator.c b/drivers/mfd/tps65911-comparator.c index 283ac675975..e7ff783aa31 100644 --- a/drivers/mfd/tps65911-comparator.c +++ b/drivers/mfd/tps65911-comparator.c @@ -157,6 +157,8 @@ static __devexit int tps65911_comparator_remove(struct platform_device *pdev) struct tps65910 *tps65910; tps65910 = dev_get_drvdata(pdev->dev.parent); + device_remove_file(&pdev->dev, &dev_attr_comp2_threshold); + device_remove_file(&pdev->dev, &dev_attr_comp1_threshold); return 0; } -- cgit v1.2.3-70-g09d2 From a5e06781f073842beb81d088eb787f0ea23d6499 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 24 Jun 2011 12:17:07 +0100 Subject: mfd: Add devices for WM831x clocking module With the new generic clk API that should appear at some point we should be able to support the clocking sensibly in Linux. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm831x-core.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers/mfd') diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c index baae9e47bff..282e76ab678 100644 --- a/drivers/mfd/wm831x-core.c +++ b/drivers/mfd/wm831x-core.c @@ -731,6 +731,9 @@ static struct mfd_cell wm8310_devs[] = { .num_resources = ARRAY_SIZE(wm831x_dcdc4_resources), .resources = wm831x_dcdc4_resources, }, + { + .name = "wm831x-clk", + }, { .name = "wm831x-epe", .id = 1, @@ -882,6 +885,9 @@ static struct mfd_cell wm8311_devs[] = { .num_resources = ARRAY_SIZE(wm831x_dcdc4_resources), .resources = wm831x_dcdc4_resources, }, + { + .name = "wm831x-clk", + }, { .name = "wm831x-epe", .id = 1, @@ -1009,6 +1015,9 @@ static struct mfd_cell wm8312_devs[] = { .num_resources = ARRAY_SIZE(wm831x_dcdc4_resources), .resources = wm831x_dcdc4_resources, }, + { + .name = "wm831x-clk", + }, { .name = "wm831x-epe", .id = 1, @@ -1160,6 +1169,9 @@ static struct mfd_cell wm8320_devs[] = { .num_resources = ARRAY_SIZE(wm8320_dcdc4_buck_resources), .resources = wm8320_dcdc4_buck_resources, }, + { + .name = "wm831x-clk", + }, { .name = "wm831x-gpio", .num_resources = ARRAY_SIZE(wm831x_gpio_resources), -- cgit v1.2.3-70-g09d2 From 63c8a58d226a0701272b54015a8d73643d72cd3d Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 24 Jun 2011 15:34:16 +0800 Subject: mfd: Fix off-by-one value range checking for tps65912_i2c_write If bytes == (TPS6591X_MAX_REGISTER + 1), we have a buffer overflow when doing memcpy(&msg[1], src, bytes). Signed-off-by: Axel Lin Signed-off-by: Samuel Ortiz --- drivers/mfd/tps65912-i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/tps65912-i2c.c b/drivers/mfd/tps65912-i2c.c index 9ed123aa662..c041f2c3d2b 100644 --- a/drivers/mfd/tps65912-i2c.c +++ b/drivers/mfd/tps65912-i2c.c @@ -57,7 +57,7 @@ static int tps65912_i2c_write(struct tps65912 *tps65912, u8 reg, u8 msg[TPS6591X_MAX_REGISTER + 1]; int ret; - if (bytes > (TPS6591X_MAX_REGISTER + 1)) + if (bytes > TPS6591X_MAX_REGISTER) return -EINVAL; msg[0] = reg; -- cgit v1.2.3-70-g09d2 From 4dcaa6b6df354fa44b3072bed3cb13aad7e5fbd4 Mon Sep 17 00:00:00 2001 From: Om Prakash Date: Mon, 27 Jun 2011 09:54:22 +0200 Subject: mfd: Fix missing stmpe kerneldoc Generating kerneldoc for STMPE result in warnings, so fix this by adding missing documentation. Signed-off-by: Om Prakash Reviewed-by: Rabin Vincent Reviewed-by: Jonas Aberg Reviewed-by: Srinidhi Kasagar Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz --- drivers/mfd/stmpe.c | 2 +- drivers/mfd/stmpe.h | 1 + include/linux/mfd/stmpe.h | 3 +++ 3 files changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c index 7ab7746631d..2963689cf45 100644 --- a/drivers/mfd/stmpe.c +++ b/drivers/mfd/stmpe.c @@ -228,7 +228,7 @@ int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length, EXPORT_SYMBOL_GPL(stmpe_block_write); /** - * stmpe_set_altfunc: set the alternate function for STMPE pins + * stmpe_set_altfunc()- set the alternate function for STMPE pins * @stmpe: Device to configure * @pins: Bitmask of pins to affect * @block: block to enable alternate functions for diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h index 0dbdc4e8cd7..e4ee3895658 100644 --- a/drivers/mfd/stmpe.h +++ b/drivers/mfd/stmpe.h @@ -42,6 +42,7 @@ struct stmpe_variant_block { * @id_mask: bits valid in CHIPID register for comparison with id_val * @num_gpios: number of GPIOS * @af_bits: number of bits used to specify the alternate function + * @regs: variant specific registers. * @blocks: list of blocks present on this device * @num_blocks: number of blocks present on this device * @num_irqs: number of internal IRQs available on this device diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h index e762c270d8d..be1af7c42e5 100644 --- a/include/linux/mfd/stmpe.h +++ b/include/linux/mfd/stmpe.h @@ -57,6 +57,7 @@ struct stmpe_variant_info; * @irq_lock: IRQ bus lock * @dev: device, mostly for dev_dbg() * @i2c: i2c client + * @partnum: part number * @variant: the detected STMPE model number * @regs: list of addresses of registers which are at different addresses on * different variants. Indexed by one of STMPE_IDX_*. @@ -121,6 +122,8 @@ struct stmpe_keypad_platform_data { * @norequest_mask: bitmask specifying which GPIOs should _not_ be * requestable due to different usage (e.g. touch, keypad) * STMPE_GPIO_NOREQ_* macros can be used here. + * @setup: board specific setup callback. + * @remove: board specific remove callback */ struct stmpe_gpio_platform_data { int gpio_base; -- cgit v1.2.3-70-g09d2 From 54f323b1325499574d92c85201971df096c25b79 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 4 Jul 2011 17:34:16 +0200 Subject: mfd: Move TPS55910 Kconfig option Having another TPS chip at the end of the Kconfig when all it's relatives are grouped together in their own section seems totally counter-intuitive. Move it, also in the Makefile. Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 18 +++++++++--------- drivers/mfd/Makefile | 2 +- 2 files changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 3695a078bae..c26136443c0 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -171,6 +171,15 @@ config MFD_TPS6586X This driver can also be built as a module. If so, the module will be called tps6586x. +config MFD_TPS65910 + bool "TPS65910 Power Management chip" + depends on I2C=y && GPIOLIB + select MFD_CORE + select GPIO_TPS65910 + help + if you say yes here you get support for the TPS65910 series of + Power Management chips. + config MFD_TPS65912 bool depends on GPIOLIB @@ -748,15 +757,6 @@ config MFD_PM8XXX_IRQ This is required to use certain other PM 8xxx features, such as GPIO and MPP. -config MFD_TPS65910 - bool "TPS65910 Power Management chip" - depends on I2C=y && GPIOLIB - select MFD_CORE - select GPIO_TPS65910 - help - if you say yes here you get support for the TPS65910 series of - Power Management chips. - config TPS65911_COMPARATOR tristate diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 1d593b9085b..ca1867db3db 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -36,6 +36,7 @@ obj-$(CONFIG_MFD_WM8994) += wm8994-core.o wm8994-irq.o obj-$(CONFIG_TPS6105X) += tps6105x.o obj-$(CONFIG_TPS65010) += tps65010.o obj-$(CONFIG_TPS6507X) += tps6507x.o +obj-$(CONFIG_MFD_TPS65910) += tps65910.o tps65910-irq.o tps65912-objs := tps65912-core.o tps65912-irq.o obj-$(CONFIG_MFD_TPS65912) += tps65912.o obj-$(CONFIG_MFD_TPS65912_I2C) += tps65912-i2c.o @@ -99,5 +100,4 @@ obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o -obj-$(CONFIG_MFD_TPS65910) += tps65910.o tps65910-irq.o obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o -- cgit v1.2.3-70-g09d2 From 7785bf11f312624101462d7dc840e27344899873 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sat, 2 Jul 2011 22:38:11 +0200 Subject: mfd: Remove dead code from max8997-irq We either hit one of the case's or the default in the switch statement in get_i2c(), so the 'return ERR_PTR(-EINVAL);' at the end of the function is just dead code - remove it. Signed-off-by: Jesper Juhl Acked-by: MyungJoo Ham Signed-off-by: Samuel Ortiz --- drivers/mfd/max8997-irq.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/max8997-irq.c b/drivers/mfd/max8997-irq.c index 638bf7e4d3b..09274cf7c33 100644 --- a/drivers/mfd/max8997-irq.c +++ b/drivers/mfd/max8997-irq.c @@ -58,8 +58,6 @@ static struct i2c_client *get_i2c(struct max8997_dev *max8997, default: return ERR_PTR(-EINVAL); } - - return ERR_PTR(-EINVAL); } struct max8997_irq_data { -- cgit v1.2.3-70-g09d2 From 09d6292befba8c6319d9471803149573ea6ed170 Mon Sep 17 00:00:00 2001 From: Jin Park Date: Mon, 4 Jul 2011 19:48:12 +0200 Subject: mfd: Add AAT2870 mfd driver Add mfd core driver for AnalogicTech AAT2870. The AAT2870 is communication through I2C and contains backlight and regulator components. Signed-off-by: Jin Park Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 10 + drivers/mfd/Makefile | 1 + drivers/mfd/aat2870-core.c | 535 ++++++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/aat2870.h | 181 +++++++++++++++ 4 files changed, 727 insertions(+) create mode 100644 drivers/mfd/aat2870-core.c create mode 100644 include/linux/mfd/aat2870.h (limited to 'drivers/mfd') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index c26136443c0..21574bdf485 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -760,6 +760,16 @@ config MFD_PM8XXX_IRQ config TPS65911_COMPARATOR tristate +config MFD_AAT2870_CORE + bool "Support for the AnalogicTech AAT2870" + select MFD_CORE + depends on I2C=y && GPIOLIB + help + If you say yes here you get support for the AAT2870. + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device. + endif # MFD_SUPPORT menu "Multimedia Capabilities Port drivers" diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index ca1867db3db..c58020303d1 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -101,3 +101,4 @@ obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o +obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o diff --git a/drivers/mfd/aat2870-core.c b/drivers/mfd/aat2870-core.c new file mode 100644 index 00000000000..345dc658ef0 --- /dev/null +++ b/drivers/mfd/aat2870-core.c @@ -0,0 +1,535 @@ +/* + * linux/drivers/mfd/aat2870-core.c + * + * Copyright (c) 2011, NVIDIA Corporation. + * Author: Jin Park + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct aat2870_register aat2870_regs[AAT2870_REG_NUM] = { + /* readable, writeable, value */ + { 0, 1, 0x00 }, /* 0x00 AAT2870_BL_CH_EN */ + { 0, 1, 0x16 }, /* 0x01 AAT2870_BLM */ + { 0, 1, 0x16 }, /* 0x02 AAT2870_BLS */ + { 0, 1, 0x56 }, /* 0x03 AAT2870_BL1 */ + { 0, 1, 0x56 }, /* 0x04 AAT2870_BL2 */ + { 0, 1, 0x56 }, /* 0x05 AAT2870_BL3 */ + { 0, 1, 0x56 }, /* 0x06 AAT2870_BL4 */ + { 0, 1, 0x56 }, /* 0x07 AAT2870_BL5 */ + { 0, 1, 0x56 }, /* 0x08 AAT2870_BL6 */ + { 0, 1, 0x56 }, /* 0x09 AAT2870_BL7 */ + { 0, 1, 0x56 }, /* 0x0A AAT2870_BL8 */ + { 0, 1, 0x00 }, /* 0x0B AAT2870_FLR */ + { 0, 1, 0x03 }, /* 0x0C AAT2870_FM */ + { 0, 1, 0x03 }, /* 0x0D AAT2870_FS */ + { 0, 1, 0x10 }, /* 0x0E AAT2870_ALS_CFG0 */ + { 0, 1, 0x06 }, /* 0x0F AAT2870_ALS_CFG1 */ + { 0, 1, 0x00 }, /* 0x10 AAT2870_ALS_CFG2 */ + { 1, 0, 0x00 }, /* 0x11 AAT2870_AMB */ + { 0, 1, 0x00 }, /* 0x12 AAT2870_ALS0 */ + { 0, 1, 0x00 }, /* 0x13 AAT2870_ALS1 */ + { 0, 1, 0x00 }, /* 0x14 AAT2870_ALS2 */ + { 0, 1, 0x00 }, /* 0x15 AAT2870_ALS3 */ + { 0, 1, 0x00 }, /* 0x16 AAT2870_ALS4 */ + { 0, 1, 0x00 }, /* 0x17 AAT2870_ALS5 */ + { 0, 1, 0x00 }, /* 0x18 AAT2870_ALS6 */ + { 0, 1, 0x00 }, /* 0x19 AAT2870_ALS7 */ + { 0, 1, 0x00 }, /* 0x1A AAT2870_ALS8 */ + { 0, 1, 0x00 }, /* 0x1B AAT2870_ALS9 */ + { 0, 1, 0x00 }, /* 0x1C AAT2870_ALSA */ + { 0, 1, 0x00 }, /* 0x1D AAT2870_ALSB */ + { 0, 1, 0x00 }, /* 0x1E AAT2870_ALSC */ + { 0, 1, 0x00 }, /* 0x1F AAT2870_ALSD */ + { 0, 1, 0x00 }, /* 0x20 AAT2870_ALSE */ + { 0, 1, 0x00 }, /* 0x21 AAT2870_ALSF */ + { 0, 1, 0x00 }, /* 0x22 AAT2870_SUB_SET */ + { 0, 1, 0x00 }, /* 0x23 AAT2870_SUB_CTRL */ + { 0, 1, 0x00 }, /* 0x24 AAT2870_LDO_AB */ + { 0, 1, 0x00 }, /* 0x25 AAT2870_LDO_CD */ + { 0, 1, 0x00 }, /* 0x26 AAT2870_LDO_EN */ +}; + +static struct mfd_cell aat2870_devs[] = { + { + .name = "aat2870-backlight", + .id = AAT2870_ID_BL, + .pdata_size = sizeof(struct aat2870_bl_platform_data), + }, + { + .name = "aat2870-regulator", + .id = AAT2870_ID_LDOA, + .pdata_size = sizeof(struct regulator_init_data), + }, + { + .name = "aat2870-regulator", + .id = AAT2870_ID_LDOB, + .pdata_size = sizeof(struct regulator_init_data), + }, + { + .name = "aat2870-regulator", + .id = AAT2870_ID_LDOC, + .pdata_size = sizeof(struct regulator_init_data), + }, + { + .name = "aat2870-regulator", + .id = AAT2870_ID_LDOD, + .pdata_size = sizeof(struct regulator_init_data), + }, +}; + +static int __aat2870_read(struct aat2870_data *aat2870, u8 addr, u8 *val) +{ + int ret; + + if (addr >= AAT2870_REG_NUM) { + dev_err(aat2870->dev, "Invalid address, 0x%02x\n", addr); + return -EINVAL; + } + + if (!aat2870->reg_cache[addr].readable) { + *val = aat2870->reg_cache[addr].value; + goto out; + } + + ret = i2c_master_send(aat2870->client, &addr, 1); + if (ret < 0) + return ret; + if (ret != 1) + return -EIO; + + ret = i2c_master_recv(aat2870->client, val, 1); + if (ret < 0) + return ret; + if (ret != 1) + return -EIO; + +out: + dev_dbg(aat2870->dev, "read: addr=0x%02x, val=0x%02x\n", addr, *val); + return 0; +} + +static int __aat2870_write(struct aat2870_data *aat2870, u8 addr, u8 val) +{ + u8 msg[2]; + int ret; + + if (addr >= AAT2870_REG_NUM) { + dev_err(aat2870->dev, "Invalid address, 0x%02x\n", addr); + return -EINVAL; + } + + if (!aat2870->reg_cache[addr].writeable) { + dev_err(aat2870->dev, "Address 0x%02x is not writeable\n", + addr); + return -EINVAL; + } + + msg[0] = addr; + msg[1] = val; + ret = i2c_master_send(aat2870->client, msg, 2); + if (ret < 0) + return ret; + if (ret != 2) + return -EIO; + + aat2870->reg_cache[addr].value = val; + + dev_dbg(aat2870->dev, "write: addr=0x%02x, val=0x%02x\n", addr, val); + return 0; +} + +static int aat2870_read(struct aat2870_data *aat2870, u8 addr, u8 *val) +{ + int ret; + + mutex_lock(&aat2870->io_lock); + ret = __aat2870_read(aat2870, addr, val); + mutex_unlock(&aat2870->io_lock); + + return ret; +} + +static int aat2870_write(struct aat2870_data *aat2870, u8 addr, u8 val) +{ + int ret; + + mutex_lock(&aat2870->io_lock); + ret = __aat2870_write(aat2870, addr, val); + mutex_unlock(&aat2870->io_lock); + + return ret; +} + +static int aat2870_update(struct aat2870_data *aat2870, u8 addr, u8 mask, + u8 val) +{ + int change; + u8 old_val, new_val; + int ret; + + mutex_lock(&aat2870->io_lock); + + ret = __aat2870_read(aat2870, addr, &old_val); + if (ret) + goto out_unlock; + + new_val = (old_val & ~mask) | (val & mask); + change = old_val != new_val; + if (change) + ret = __aat2870_write(aat2870, addr, new_val); + +out_unlock: + mutex_unlock(&aat2870->io_lock); + + return ret; +} + +static inline void aat2870_enable(struct aat2870_data *aat2870) +{ + if (aat2870->en_pin >= 0) + gpio_set_value(aat2870->en_pin, 1); + + aat2870->is_enable = 1; +} + +static inline void aat2870_disable(struct aat2870_data *aat2870) +{ + if (aat2870->en_pin >= 0) + gpio_set_value(aat2870->en_pin, 0); + + aat2870->is_enable = 0; +} + +#ifdef CONFIG_DEBUG_FS +static ssize_t aat2870_dump_reg(struct aat2870_data *aat2870, char *buf) +{ + u8 addr, val; + ssize_t count = 0; + int ret; + + count += sprintf(buf, "aat2870 registers\n"); + for (addr = 0; addr < AAT2870_REG_NUM; addr++) { + count += sprintf(buf + count, "0x%02x: ", addr); + if (count >= PAGE_SIZE - 1) + break; + + ret = aat2870->read(aat2870, addr, &val); + if (ret == 0) + count += snprintf(buf + count, PAGE_SIZE - count, + "0x%02x", val); + else + count += snprintf(buf + count, PAGE_SIZE - count, + "", ret); + + if (count >= PAGE_SIZE - 1) + break; + + count += snprintf(buf + count, PAGE_SIZE - count, "\n"); + if (count >= PAGE_SIZE - 1) + break; + } + + /* Truncate count; min() would cause a warning */ + if (count >= PAGE_SIZE) + count = PAGE_SIZE - 1; + + return count; +} + +static int aat2870_reg_open_file(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + + return 0; +} + +static ssize_t aat2870_reg_read_file(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct aat2870_data *aat2870 = file->private_data; + char *buf; + ssize_t ret; + + buf = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + ret = aat2870_dump_reg(aat2870, buf); + if (ret >= 0) + ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret); + + kfree(buf); + + return ret; +} + +static ssize_t aat2870_reg_write_file(struct file *file, + const char __user *user_buf, size_t count, + loff_t *ppos) +{ + struct aat2870_data *aat2870 = file->private_data; + char buf[32]; + int buf_size; + char *start = buf; + unsigned long addr, val; + int ret; + + buf_size = min(count, (sizeof(buf)-1)); + if (copy_from_user(buf, user_buf, buf_size)) { + dev_err(aat2870->dev, "Failed to copy from user\n"); + return -EFAULT; + } + buf[buf_size] = 0; + + while (*start == ' ') + start++; + + addr = simple_strtoul(start, &start, 16); + if (addr >= AAT2870_REG_NUM) { + dev_err(aat2870->dev, "Invalid address, 0x%lx\n", addr); + return -EINVAL; + } + + while (*start == ' ') + start++; + + if (strict_strtoul(start, 16, &val)) + return -EINVAL; + + ret = aat2870->write(aat2870, (u8)addr, (u8)val); + if (ret) + return ret; + + return buf_size; +} + +static const struct file_operations aat2870_reg_fops = { + .open = aat2870_reg_open_file, + .read = aat2870_reg_read_file, + .write = aat2870_reg_write_file, +}; + +static void aat2870_init_debugfs(struct aat2870_data *aat2870) +{ + aat2870->dentry_root = debugfs_create_dir("aat2870", NULL); + if (!aat2870->dentry_root) { + dev_warn(aat2870->dev, + "Failed to create debugfs root directory\n"); + return; + } + + aat2870->dentry_reg = debugfs_create_file("regs", 0644, + aat2870->dentry_root, + aat2870, &aat2870_reg_fops); + if (!aat2870->dentry_reg) + dev_warn(aat2870->dev, + "Failed to create debugfs register file\n"); +} + +static void aat2870_uninit_debugfs(struct aat2870_data *aat2870) +{ + debugfs_remove_recursive(aat2870->dentry_root); +} +#else +static inline void aat2870_init_debugfs(struct aat2870_data *aat2870) +{ +} + +static inline void aat2870_uninit_debugfs(struct aat2870_data *aat2870) +{ +} +#endif /* CONFIG_DEBUG_FS */ + +static int aat2870_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct aat2870_platform_data *pdata = client->dev.platform_data; + struct aat2870_data *aat2870; + int i, j; + int ret = 0; + + aat2870 = kzalloc(sizeof(struct aat2870_data), GFP_KERNEL); + if (!aat2870) { + dev_err(&client->dev, + "Failed to allocate memory for aat2870\n"); + ret = -ENOMEM; + goto out; + } + + aat2870->dev = &client->dev; + dev_set_drvdata(aat2870->dev, aat2870); + + aat2870->client = client; + i2c_set_clientdata(client, aat2870); + + aat2870->reg_cache = aat2870_regs; + + if (pdata->en_pin < 0) + aat2870->en_pin = -1; + else + aat2870->en_pin = pdata->en_pin; + + aat2870->init = pdata->init; + aat2870->uninit = pdata->uninit; + aat2870->read = aat2870_read; + aat2870->write = aat2870_write; + aat2870->update = aat2870_update; + + mutex_init(&aat2870->io_lock); + + if (aat2870->init) + aat2870->init(aat2870); + + if (aat2870->en_pin >= 0) { + ret = gpio_request(aat2870->en_pin, "aat2870-en"); + if (ret < 0) { + dev_err(&client->dev, + "Failed to request GPIO %d\n", aat2870->en_pin); + goto out_kfree; + } + gpio_direction_output(aat2870->en_pin, 1); + } + + aat2870_enable(aat2870); + + for (i = 0; i < pdata->num_subdevs; i++) { + for (j = 0; j < ARRAY_SIZE(aat2870_devs); j++) { + if ((pdata->subdevs[i].id == aat2870_devs[j].id) && + !strcmp(pdata->subdevs[i].name, + aat2870_devs[j].name)) { + aat2870_devs[j].platform_data = + pdata->subdevs[i].platform_data; + break; + } + } + } + + ret = mfd_add_devices(aat2870->dev, 0, aat2870_devs, + ARRAY_SIZE(aat2870_devs), NULL, 0); + if (ret != 0) { + dev_err(aat2870->dev, "Failed to add subdev: %d\n", ret); + goto out_disable; + } + + aat2870_init_debugfs(aat2870); + + return 0; + +out_disable: + aat2870_disable(aat2870); + if (aat2870->en_pin >= 0) + gpio_free(aat2870->en_pin); +out_kfree: + kfree(aat2870); +out: + return ret; +} + +static int aat2870_i2c_remove(struct i2c_client *client) +{ + struct aat2870_data *aat2870 = i2c_get_clientdata(client); + + aat2870_uninit_debugfs(aat2870); + + mfd_remove_devices(aat2870->dev); + aat2870_disable(aat2870); + if (aat2870->en_pin >= 0) + gpio_free(aat2870->en_pin); + if (aat2870->uninit) + aat2870->uninit(aat2870); + kfree(aat2870); + + return 0; +} + +#ifdef CONFIG_PM +static int aat2870_i2c_suspend(struct i2c_client *client, pm_message_t state) +{ + struct aat2870_data *aat2870 = i2c_get_clientdata(client); + + aat2870_disable(aat2870); + + return 0; +} + +static int aat2870_i2c_resume(struct i2c_client *client) +{ + struct aat2870_data *aat2870 = i2c_get_clientdata(client); + struct aat2870_register *reg = NULL; + int i; + + aat2870_enable(aat2870); + + /* restore registers */ + for (i = 0; i < AAT2870_REG_NUM; i++) { + reg = &aat2870->reg_cache[i]; + if (reg->writeable) + aat2870->write(aat2870, i, reg->value); + } + + return 0; +} +#else +#define aat2870_i2c_suspend NULL +#define aat2870_i2c_resume NULL +#endif /* CONFIG_PM */ + +static struct i2c_device_id aat2870_i2c_id_table[] = { + { "aat2870", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, aat2870_i2c_id_table); + +static struct i2c_driver aat2870_i2c_driver = { + .driver = { + .name = "aat2870", + .owner = THIS_MODULE, + }, + .probe = aat2870_i2c_probe, + .remove = aat2870_i2c_remove, + .suspend = aat2870_i2c_suspend, + .resume = aat2870_i2c_resume, + .id_table = aat2870_i2c_id_table, +}; + +static int __init aat2870_init(void) +{ + return i2c_add_driver(&aat2870_i2c_driver); +} +subsys_initcall(aat2870_init); + +static void __exit aat2870_exit(void) +{ + i2c_del_driver(&aat2870_i2c_driver); +} +module_exit(aat2870_exit); + +MODULE_DESCRIPTION("Core support for the AnalogicTech AAT2870"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jin Park "); diff --git a/include/linux/mfd/aat2870.h b/include/linux/mfd/aat2870.h new file mode 100644 index 00000000000..89212df0562 --- /dev/null +++ b/include/linux/mfd/aat2870.h @@ -0,0 +1,181 @@ +/* + * linux/include/linux/mfd/aat2870.h + * + * Copyright (c) 2011, NVIDIA Corporation. + * Author: Jin Park + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef __LINUX_MFD_AAT2870_H +#define __LINUX_MFD_AAT2870_H + +#include +#include + +/* Register offsets */ +#define AAT2870_BL_CH_EN 0x00 +#define AAT2870_BLM 0x01 +#define AAT2870_BLS 0x02 +#define AAT2870_BL1 0x03 +#define AAT2870_BL2 0x04 +#define AAT2870_BL3 0x05 +#define AAT2870_BL4 0x06 +#define AAT2870_BL5 0x07 +#define AAT2870_BL6 0x08 +#define AAT2870_BL7 0x09 +#define AAT2870_BL8 0x0A +#define AAT2870_FLR 0x0B +#define AAT2870_FM 0x0C +#define AAT2870_FS 0x0D +#define AAT2870_ALS_CFG0 0x0E +#define AAT2870_ALS_CFG1 0x0F +#define AAT2870_ALS_CFG2 0x10 +#define AAT2870_AMB 0x11 +#define AAT2870_ALS0 0x12 +#define AAT2870_ALS1 0x13 +#define AAT2870_ALS2 0x14 +#define AAT2870_ALS3 0x15 +#define AAT2870_ALS4 0x16 +#define AAT2870_ALS5 0x17 +#define AAT2870_ALS6 0x18 +#define AAT2870_ALS7 0x19 +#define AAT2870_ALS8 0x1A +#define AAT2870_ALS9 0x1B +#define AAT2870_ALSA 0x1C +#define AAT2870_ALSB 0x1D +#define AAT2870_ALSC 0x1E +#define AAT2870_ALSD 0x1F +#define AAT2870_ALSE 0x20 +#define AAT2870_ALSF 0x21 +#define AAT2870_SUB_SET 0x22 +#define AAT2870_SUB_CTRL 0x23 +#define AAT2870_LDO_AB 0x24 +#define AAT2870_LDO_CD 0x25 +#define AAT2870_LDO_EN 0x26 +#define AAT2870_REG_NUM 0x27 + +/* Device IDs */ +enum aat2870_id { + AAT2870_ID_BL, + AAT2870_ID_LDOA, + AAT2870_ID_LDOB, + AAT2870_ID_LDOC, + AAT2870_ID_LDOD +}; + +/* Backlight channels */ +#define AAT2870_BL_CH1 0x01 +#define AAT2870_BL_CH2 0x02 +#define AAT2870_BL_CH3 0x04 +#define AAT2870_BL_CH4 0x08 +#define AAT2870_BL_CH5 0x10 +#define AAT2870_BL_CH6 0x20 +#define AAT2870_BL_CH7 0x40 +#define AAT2870_BL_CH8 0x80 +#define AAT2870_BL_CH_ALL 0xFF + +/* Backlight current magnitude (mA) */ +enum aat2870_current { + AAT2870_CURRENT_0_45, + AAT2870_CURRENT_0_90, + AAT2870_CURRENT_1_80, + AAT2870_CURRENT_2_70, + AAT2870_CURRENT_3_60, + AAT2870_CURRENT_4_50, + AAT2870_CURRENT_5_40, + AAT2870_CURRENT_6_30, + AAT2870_CURRENT_7_20, + AAT2870_CURRENT_8_10, + AAT2870_CURRENT_9_00, + AAT2870_CURRENT_9_90, + AAT2870_CURRENT_10_8, + AAT2870_CURRENT_11_7, + AAT2870_CURRENT_12_6, + AAT2870_CURRENT_13_5, + AAT2870_CURRENT_14_4, + AAT2870_CURRENT_15_3, + AAT2870_CURRENT_16_2, + AAT2870_CURRENT_17_1, + AAT2870_CURRENT_18_0, + AAT2870_CURRENT_18_9, + AAT2870_CURRENT_19_8, + AAT2870_CURRENT_20_7, + AAT2870_CURRENT_21_6, + AAT2870_CURRENT_22_5, + AAT2870_CURRENT_23_4, + AAT2870_CURRENT_24_3, + AAT2870_CURRENT_25_2, + AAT2870_CURRENT_26_1, + AAT2870_CURRENT_27_0, + AAT2870_CURRENT_27_9 +}; + +struct aat2870_register { + bool readable; + bool writeable; + u8 value; +}; + +struct aat2870_data { + struct device *dev; + struct i2c_client *client; + + struct mutex io_lock; + struct aat2870_register *reg_cache; /* register cache */ + int en_pin; /* enable GPIO pin (if < 0, ignore this value) */ + bool is_enable; + + /* init and uninit for platform specified */ + int (*init)(struct aat2870_data *aat2870); + void (*uninit)(struct aat2870_data *aat2870); + + /* i2c io funcntions */ + int (*read)(struct aat2870_data *aat2870, u8 addr, u8 *val); + int (*write)(struct aat2870_data *aat2870, u8 addr, u8 val); + int (*update)(struct aat2870_data *aat2870, u8 addr, u8 mask, u8 val); + + /* for debugfs */ + struct dentry *dentry_root; + struct dentry *dentry_reg; +}; + +struct aat2870_subdev_info { + int id; + const char *name; + void *platform_data; +}; + +struct aat2870_platform_data { + int en_pin; /* enable GPIO pin (if < 0, ignore this value) */ + + struct aat2870_subdev_info *subdevs; + int num_subdevs; + + /* init and uninit for platform specified */ + int (*init)(struct aat2870_data *aat2870); + void (*uninit)(struct aat2870_data *aat2870); +}; + +struct aat2870_bl_platform_data { + /* backlight channels, default is AAT2870_BL_CH_ALL */ + int channels; + /* backlight current magnitude, default is AAT2870_CURRENT_27_9 */ + int max_current; + /* maximum brightness, default is 255 */ + int max_brightness; +}; + +#endif /* __LINUX_MFD_AAT2870_H */ -- cgit v1.2.3-70-g09d2 From dc7e412d431db5da7fa252f4c3ed475ef4af3e8a Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Wed, 6 Jul 2011 00:29:07 +0200 Subject: mfd: Don't leak init_data in tps65910_i2c_probe There are a couple of situations where we leak init_data in drivers/mfd/tps65910.c:tps65910_i2c_probe() - this patch should take care of them. Signed-off-by: Jesper Juhl Signed-off-by: Samuel Ortiz --- drivers/mfd/tps65910.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c index 837f0e6fbf0..0226cdea2b4 100644 --- a/drivers/mfd/tps65910.c +++ b/drivers/mfd/tps65910.c @@ -151,8 +151,10 @@ static int tps65910_i2c_probe(struct i2c_client *i2c, init_data->irq_base = pmic_plat_data->irq; tps65910 = kzalloc(sizeof(struct tps65910), GFP_KERNEL); - if (tps65910 == NULL) + if (tps65910 == NULL) { + kfree(init_data); return -ENOMEM; + } i2c_set_clientdata(i2c, tps65910); tps65910->dev = &i2c->dev; @@ -174,11 +176,13 @@ static int tps65910_i2c_probe(struct i2c_client *i2c, if (ret < 0) goto err; + kfree(init_data); return ret; err: mfd_remove_devices(tps65910->dev); kfree(tps65910); + kfree(init_data); return ret; } -- cgit v1.2.3-70-g09d2 From b1224cd113d4441edee4a58a1e2e428141247c0d Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Wed, 13 Jul 2011 23:22:26 +0200 Subject: mfd: Avoid two assignments if failures happen in tps65910_i2c_probe In drivers/mfd/tps65910.c:tps65910_i2c_probe() there's potential for a tiny optimization. We assign to init_data->irq and init_data->irq_base long before we need them, and there are two potential exits from the function before they are needed. Moving the assignments below these two potential exits means we completely avoid doing them in these two (failure) cases. Signed-off-by: Jesper Juhl Acked-by: Graeme Gregory Signed-off-by: Samuel Ortiz --- drivers/mfd/tps65910.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c index 0226cdea2b4..6f5b8cf2f65 100644 --- a/drivers/mfd/tps65910.c +++ b/drivers/mfd/tps65910.c @@ -147,9 +147,6 @@ static int tps65910_i2c_probe(struct i2c_client *i2c, if (init_data == NULL) return -ENOMEM; - init_data->irq = pmic_plat_data->irq; - init_data->irq_base = pmic_plat_data->irq; - tps65910 = kzalloc(sizeof(struct tps65910), GFP_KERNEL); if (tps65910 == NULL) { kfree(init_data); @@ -170,6 +167,9 @@ static int tps65910_i2c_probe(struct i2c_client *i2c, if (ret < 0) goto err; + init_data->irq = pmic_plat_data->irq; + init_data->irq_base = pmic_plat_data->irq; + tps65910_gpio_init(tps65910, pmic_plat_data->gpio_base); ret = tps65910_irq_init(tps65910, init_data->irq, init_data); -- cgit v1.2.3-70-g09d2 From 88c939770db375244b00ba92e901fa92677a7164 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 20 Jul 2011 17:05:13 +0100 Subject: mfd: Acknowlege all WM831x IRQs before we handle them Ensure that we never have a window where we've handled an interrupt (and therefore need to be notified of new events) but haven't yet told the interrupt controller that this is the case (so any new events will be discarded). Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm831x-irq.c | 30 +++++++++++++----------------- 1 file changed, 13 insertions(+), 17 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c index 6c3408ca2c2..ada1835a545 100644 --- a/drivers/mfd/wm831x-irq.c +++ b/drivers/mfd/wm831x-irq.c @@ -449,7 +449,7 @@ static irqreturn_t wm831x_irq_thread(int irq, void *data) { struct wm831x *wm831x = data; unsigned int i; - int primary; + int primary, status_addr; int status_regs[WM831X_NUM_IRQ_REGS] = { 0 }; int read[WM831X_NUM_IRQ_REGS] = { 0 }; int *status; @@ -484,8 +484,9 @@ static irqreturn_t wm831x_irq_thread(int irq, void *data) /* Hopefully there should only be one register to read * each time otherwise we ought to do a block read. */ if (!read[offset]) { - *status = wm831x_reg_read(wm831x, - irq_data_to_status_reg(&wm831x_irqs[i])); + status_addr = irq_data_to_status_reg(&wm831x_irqs[i]); + + *status = wm831x_reg_read(wm831x, status_addr); if (*status < 0) { dev_err(wm831x->dev, "Failed to read IRQ status: %d\n", @@ -494,26 +495,21 @@ static irqreturn_t wm831x_irq_thread(int irq, void *data) } read[offset] = 1; + + /* Ignore any bits that we don't think are masked */ + *status &= ~wm831x->irq_masks_cur[offset]; + + /* Acknowledge now so we don't miss + * notifications while we handle. + */ + wm831x_reg_write(wm831x, status_addr, *status); } - /* Report it if it isn't masked, or forget the status. */ - if ((*status & ~wm831x->irq_masks_cur[offset]) - & wm831x_irqs[i].mask) + if (*status & wm831x_irqs[i].mask) handle_nested_irq(wm831x->irq_base + i); - else - *status &= ~wm831x_irqs[i].mask; } out: - /* Touchscreen interrupts are handled specially in the driver */ - status_regs[0] &= ~(WM831X_TCHDATA_EINT | WM831X_TCHPD_EINT); - - for (i = 0; i < ARRAY_SIZE(status_regs); i++) { - if (status_regs[i]) - wm831x_reg_write(wm831x, WM831X_INTERRUPT_STATUS_1 + i, - status_regs[i]); - } - return IRQ_HANDLED; } -- cgit v1.2.3-70-g09d2 From ccd80c7142ba178f5395fe69244e6c4611100511 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 21 Jul 2011 10:09:24 +0100 Subject: mfd: Acknowledge WM8994 IRQs before reporting This ensures we never have a window where we've handled an interrupt but not told the hardware about it. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8994-irq.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/wm8994-irq.c b/drivers/mfd/wm8994-irq.c index 71c6e8f9aed..d682f7bd112 100644 --- a/drivers/mfd/wm8994-irq.c +++ b/drivers/mfd/wm8994-irq.c @@ -231,12 +231,6 @@ static irqreturn_t wm8994_irq_thread(int irq, void *data) status[i] &= ~wm8994->irq_masks_cur[i]; } - /* Report */ - for (i = 0; i < ARRAY_SIZE(wm8994_irqs); i++) { - if (status[wm8994_irqs[i].reg - 1] & wm8994_irqs[i].mask) - handle_nested_irq(wm8994->irq_base + i); - } - /* Ack any unmasked IRQs */ for (i = 0; i < ARRAY_SIZE(status); i++) { if (status[i]) @@ -244,6 +238,12 @@ static irqreturn_t wm8994_irq_thread(int irq, void *data) status[i]); } + /* Report */ + for (i = 0; i < ARRAY_SIZE(wm8994_irqs); i++) { + if (status[wm8994_irqs[i].reg - 1] & wm8994_irqs[i].mask) + handle_nested_irq(wm8994->irq_base + i); + } + return IRQ_HANDLED; } -- cgit v1.2.3-70-g09d2 From e2e49d57194c1c3cee078a249e854a4c1d57170d Mon Sep 17 00:00:00 2001 From: Keshava Munegowda Date: Fri, 22 Jul 2011 18:39:30 +0530 Subject: mfd: Fix the omap-usb-host clock API usage on usbhs_disable() usbhs_disable function was invoking clk_enable() instead of clk_disable(), thus only increasing the clock usage counter and preventing this particular clock from being ever turned off. Because of this, the power domain of omap4 the USB Host subsystem would never reach lower power states.This patch calls clk_disable() in usbhs_disable function Signed-off-by: Keshava Munegowda Signed-off-by: Samuel Ortiz --- drivers/mfd/omap-usb-host.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 1717144fe7f..29601e7d606 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -998,9 +998,9 @@ static void usbhs_disable(struct device *dev) if (is_omap_usbhs_rev2(omap)) { if (is_ehci_tll_mode(pdata->port_mode[0])) - clk_enable(omap->usbtll_p1_fck); + clk_disable(omap->usbtll_p1_fck); if (is_ehci_tll_mode(pdata->port_mode[1])) - clk_enable(omap->usbtll_p2_fck); + clk_disable(omap->usbtll_p2_fck); clk_disable(omap->utmi_p2_fck); clk_disable(omap->utmi_p1_fck); } -- cgit v1.2.3-70-g09d2 From 2b959e7f87491453f3220bb8ab11da7ccb7f6515 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 22 Jul 2011 17:17:08 -0700 Subject: mfd: twl6030-pwm.c needs MODULE_LICENSE twl6030_pwm: module license 'unspecified' taints kernel. Signed-off-by: Randy Dunlap Acked-by: Hemanth V Acked-by: Felipe Balbi Signed-off-by: Samuel Ortiz --- drivers/mfd/twl6030-pwm.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/mfd') diff --git a/drivers/mfd/twl6030-pwm.c b/drivers/mfd/twl6030-pwm.c index 5d25bdc7842..e8fee147678 100644 --- a/drivers/mfd/twl6030-pwm.c +++ b/drivers/mfd/twl6030-pwm.c @@ -161,3 +161,5 @@ void pwm_free(struct pwm_device *pwm) kfree(pwm); } EXPORT_SYMBOL(pwm_free); + +MODULE_LICENSE("GPL"); -- cgit v1.2.3-70-g09d2 From e178ccb33569da17dc897a08a3865441b813bdfb Mon Sep 17 00:00:00 2001 From: Sanjeev Premi Date: Mon, 11 Jul 2011 20:50:31 +0530 Subject: mfd: Fix mismatch in twl4030 mutex lock-unlock A mutex is locked on entry into twl4030_madc_conversion(). Immediate return on some error conditions leaves the mutex locked. This patch ensures that mutex is always unlocked before leaving the function. Signed-off-by: Sanjeev Premi Cc: Keerthy Signed-off-by: Samuel Ortiz --- drivers/mfd/twl4030-madc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/twl4030-madc.c b/drivers/mfd/twl4030-madc.c index 3941ddcf15f..b5d598c3aa7 100644 --- a/drivers/mfd/twl4030-madc.c +++ b/drivers/mfd/twl4030-madc.c @@ -530,13 +530,13 @@ int twl4030_madc_conversion(struct twl4030_madc_request *req) if (ret) { dev_err(twl4030_madc->dev, "unable to write sel register 0x%X\n", method->sel + 1); - return ret; + goto out; } ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, ch_lsb, method->sel); if (ret) { dev_err(twl4030_madc->dev, "unable to write sel register 0x%X\n", method->sel + 1); - return ret; + goto out; } /* Select averaging for all channels if do_avg is set */ if (req->do_avg) { @@ -546,7 +546,7 @@ int twl4030_madc_conversion(struct twl4030_madc_request *req) dev_err(twl4030_madc->dev, "unable to write avg register 0x%X\n", method->avg + 1); - return ret; + goto out; } ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, ch_lsb, method->avg); @@ -554,7 +554,7 @@ int twl4030_madc_conversion(struct twl4030_madc_request *req) dev_err(twl4030_madc->dev, "unable to write sel reg 0x%X\n", method->sel + 1); - return ret; + goto out; } } if (req->type == TWL4030_MADC_IRQ_ONESHOT && req->func_cb != NULL) { -- cgit v1.2.3-70-g09d2