From 6858d49833b8c2aae74adcb593065797409d376e Mon Sep 17 00:00:00 2001 From: "Arce, Abraham" Date: Thu, 13 May 2010 15:05:47 -0500 Subject: EEPROM: max6875: Header file cleanup Change max6875.c header file to format as in conventions Signed-off-by: Abraham Arce Acked-by: Wolfram Sang Signed-off-by: Jiri Kosina --- drivers/misc/eeprom/max6875.c | 52 +++++++++++++++++++++---------------------- 1 file changed, 26 insertions(+), 26 deletions(-) (limited to 'drivers/misc/eeprom') diff --git a/drivers/misc/eeprom/max6875.c b/drivers/misc/eeprom/max6875.c index 5a6b2bce8ad..fe290927850 100644 --- a/drivers/misc/eeprom/max6875.c +++ b/drivers/misc/eeprom/max6875.c @@ -1,30 +1,30 @@ /* - max6875.c - driver for MAX6874/MAX6875 - - Copyright (C) 2005 Ben Gardner - - Based on eeprom.c - - The MAX6875 has a bank of registers and two banks of EEPROM. - Address ranges are defined as follows: - * 0x0000 - 0x0046 = configuration registers - * 0x8000 - 0x8046 = configuration EEPROM - * 0x8100 - 0x82FF = user EEPROM - - This driver makes the user EEPROM available for read. - - The registers & config EEPROM should be accessed via i2c-dev. - - The MAX6875 ignores the lowest address bit, so each chip responds to - two addresses - 0x50/0x51 and 0x52/0x53. - - Note that the MAX6875 uses i2c_smbus_write_byte_data() to set the read - address, so this driver is destructive if loaded for the wrong EEPROM chip. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; version 2 of the License. -*/ + * max6875.c - driver for MAX6874/MAX6875 + * + * Copyright (C) 2005 Ben Gardner + * + * Based on eeprom.c + * + * The MAX6875 has a bank of registers and two banks of EEPROM. + * Address ranges are defined as follows: + * * 0x0000 - 0x0046 = configuration registers + * * 0x8000 - 0x8046 = configuration EEPROM + * * 0x8100 - 0x82FF = user EEPROM + * + * This driver makes the user EEPROM available for read. + * + * The registers & config EEPROM should be accessed via i2c-dev. + * + * The MAX6875 ignores the lowest address bit, so each chip responds to + * two addresses - 0x50/0x51 and 0x52/0x53. + * + * Note that the MAX6875 uses i2c_smbus_write_byte_data() to set the read + * address, so this driver is destructive if loaded for the wrong EEPROM chip. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ #include #include -- cgit v1.2.3-70-g09d2