From 79f7ae7c45a6ccf04e2908337461dee615f6afb0 Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Fri, 14 Mar 2014 21:11:56 +0900 Subject: mmc: clarify DDR timing mode between SD-UHS and eMMC This change distinguishes DDR timing mode of current mixed usage to clarify device type. Signed-off-by: Seungwon Jeon Acked-by: Jaehoon Chung Signed-off-by: Ulf Hansson Signed-off-by: Chris Ball --- drivers/mmc/core/mmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/mmc/core/mmc.c') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 1ab5f3a0af5..e22d8515ff9 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -1264,7 +1264,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, goto err; } mmc_card_set_ddr_mode(card); - mmc_set_timing(card->host, MMC_TIMING_UHS_DDR50); + mmc_set_timing(card->host, MMC_TIMING_MMC_DDR52); mmc_set_bus_width(card->host, bus_width); } } -- cgit v1.2.3-70-g09d2 From d1e58212caa4fdd95dfb003ba6e90aa0c9c1ac03 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sat, 8 Mar 2014 15:05:27 +0800 Subject: mmc: Convert to use ATTRIBUTE_GROUPS Use new ATTRIBUTE_GROUPS macro to declare attribute groups. Signed-off-by: Axel Lin Signed-off-by: Ulf Hansson Signed-off-by: Chris Ball --- drivers/mmc/core/mmc.c | 12 ++---------- drivers/mmc/core/sd.c | 12 ++---------- 2 files changed, 4 insertions(+), 20 deletions(-) (limited to 'drivers/mmc/core/mmc.c') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index e22d8515ff9..fbcf93d8185 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -694,18 +694,10 @@ static struct attribute *mmc_std_attrs[] = { &dev_attr_rel_sectors.attr, NULL, }; - -static struct attribute_group mmc_std_attr_group = { - .attrs = mmc_std_attrs, -}; - -static const struct attribute_group *mmc_attr_groups[] = { - &mmc_std_attr_group, - NULL, -}; +ATTRIBUTE_GROUPS(mmc_std); static struct device_type mmc_type = { - .groups = mmc_attr_groups, + .groups = mmc_std_groups, }; /* diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 2dd359d2242..aef515755e5 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -707,18 +707,10 @@ static struct attribute *sd_std_attrs[] = { &dev_attr_serial.attr, NULL, }; - -static struct attribute_group sd_std_attr_group = { - .attrs = sd_std_attrs, -}; - -static const struct attribute_group *sd_attr_groups[] = { - &sd_std_attr_group, - NULL, -}; +ATTRIBUTE_GROUPS(sd_std); struct device_type sd_type = { - .groups = sd_attr_groups, + .groups = sd_std_groups, }; /* -- cgit v1.2.3-70-g09d2 From cdc991790c51c693d0c347a5286af017826a5d01 Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Wed, 23 Apr 2014 17:07:35 +0900 Subject: mmc: drop the speed mode of card's state Timing mode identifier has same role and can take the place of speed mode. This change removes all related speed mode. Signed-off-by: Seungwon Jeon Tested-by: Jaehoon Chung Acked-by: Jaehoon Chung Signed-off-by: Ulf Hansson Signed-off-by: Chris Ball --- drivers/mmc/core/bus.c | 8 ++++---- drivers/mmc/core/core.c | 3 +-- drivers/mmc/core/mmc.c | 11 +++-------- drivers/mmc/core/sd.c | 16 +++------------- drivers/mmc/core/sd.h | 1 - drivers/mmc/core/sdio.c | 8 ++------ drivers/net/wireless/rsi/rsi_91x_sdio.c | 4 +--- include/linux/mmc/card.h | 23 ++++++----------------- include/linux/mmc/host.h | 23 +++++++++++++++++++++++ 9 files changed, 43 insertions(+), 54 deletions(-) (limited to 'drivers/mmc/core/mmc.c') diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index 824644875d4..f37e9d6af84 100644 --- a/drivers/mmc/core/bus.c +++ b/drivers/mmc/core/bus.c @@ -341,16 +341,16 @@ int mmc_add_card(struct mmc_card *card) if (mmc_host_is_spi(card->host)) { pr_info("%s: new %s%s%s card on SPI\n", mmc_hostname(card->host), - mmc_card_highspeed(card) ? "high speed " : "", - mmc_card_ddr_mode(card) ? "DDR " : "", + mmc_card_hs(card) ? "high speed " : "", + mmc_card_ddr52(card) ? "DDR " : "", type); } else { pr_info("%s: new %s%s%s%s%s card at address %04x\n", mmc_hostname(card->host), mmc_card_uhs(card) ? "ultra high speed " : - (mmc_card_highspeed(card) ? "high speed " : ""), + (mmc_card_hs(card) ? "high speed " : ""), (mmc_card_hs200(card) ? "HS200 " : ""), - mmc_card_ddr_mode(card) ? "DDR " : "", + mmc_card_ddr52(card) ? "DDR " : "", uhs_bus_speed_mode, type, card->rca); } diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index d97dff5fab6..02baa30653f 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -2192,7 +2192,7 @@ int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen) { struct mmc_command cmd = {0}; - if (mmc_card_blockaddr(card) || mmc_card_ddr_mode(card)) + if (mmc_card_blockaddr(card) || mmc_card_ddr52(card)) return 0; cmd.opcode = MMC_SET_BLOCKLEN; @@ -2272,7 +2272,6 @@ static int mmc_do_hw_reset(struct mmc_host *host, int check) } } - host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_DDR); if (mmc_host_is_spi(host)) { host->ios.chip_select = MMC_CS_HIGH; host->ios.bus_mode = MMC_BUSMODE_PUSHPULL; diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index fbcf93d8185..31220529e17 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -1083,11 +1083,9 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, } else { if (card->ext_csd.hs_max_dtr > 52000000 && host->caps2 & MMC_CAP2_HS200) { - mmc_card_set_hs200(card); mmc_set_timing(card->host, MMC_TIMING_MMC_HS200); } else { - mmc_card_set_highspeed(card); mmc_set_timing(card->host, MMC_TIMING_MMC_HS); } } @@ -1098,10 +1096,10 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, */ max_dtr = (unsigned int)-1; - if (mmc_card_highspeed(card) || mmc_card_hs200(card)) { + if (mmc_card_hs(card) || mmc_card_hs200(card)) { if (max_dtr > card->ext_csd.hs_max_dtr) max_dtr = card->ext_csd.hs_max_dtr; - if (mmc_card_highspeed(card) && (max_dtr > 52000000)) + if (mmc_card_hs(card) && (max_dtr > 52000000)) max_dtr = 52000000; } else if (max_dtr > card->csd.max_dtr) { max_dtr = card->csd.max_dtr; @@ -1112,7 +1110,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, /* * Indicate DDR mode (if supported). */ - if (mmc_card_highspeed(card)) { + if (mmc_card_hs(card)) { if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_8V) && (host->caps & MMC_CAP_1_8V_DDR)) ddr = MMC_1_8V_DDR_MODE; @@ -1255,7 +1253,6 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, if (err) goto err; } - mmc_card_set_ddr_mode(card); mmc_set_timing(card->host, MMC_TIMING_MMC_DDR52); mmc_set_bus_width(card->host, bus_width); } @@ -1499,7 +1496,6 @@ static int _mmc_suspend(struct mmc_host *host, bool is_suspend) err = mmc_sleep(host); else if (!mmc_host_is_spi(host)) err = mmc_deselect_cards(host); - host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200); if (!err) { mmc_power_off(host); @@ -1629,7 +1625,6 @@ static int mmc_power_restore(struct mmc_host *host) { int ret; - host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200); mmc_claim_host(host); ret = mmc_init_card(host, host->card->ocr, host->card); mmc_release_host(host); diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index aef515755e5..0c44510bf71 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -887,7 +887,7 @@ unsigned mmc_sd_get_max_clock(struct mmc_card *card) { unsigned max_dtr = (unsigned int)-1; - if (mmc_card_highspeed(card)) { + if (mmc_card_hs(card)) { if (max_dtr > card->sw_caps.hs_max_dtr) max_dtr = card->sw_caps.hs_max_dtr; } else if (max_dtr > card->csd.max_dtr) { @@ -897,12 +897,6 @@ unsigned mmc_sd_get_max_clock(struct mmc_card *card) return max_dtr; } -void mmc_sd_go_highspeed(struct mmc_card *card) -{ - mmc_card_set_highspeed(card); - mmc_set_timing(card->host, MMC_TIMING_SD_HS); -} - /* * Handle the detection and initialisation of a card. * @@ -977,16 +971,13 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, err = mmc_sd_init_uhs_card(card); if (err) goto free_card; - - /* Card is an ultra-high-speed card */ - mmc_card_set_uhs(card); } else { /* * Attempt to change to high-speed (if supported) */ err = mmc_sd_switch_hs(card); if (err > 0) - mmc_sd_go_highspeed(card); + mmc_set_timing(card->host, MMC_TIMING_SD_HS); else if (err) goto free_card; @@ -1081,7 +1072,7 @@ static int _mmc_sd_suspend(struct mmc_host *host) if (!mmc_host_is_spi(host)) err = mmc_deselect_cards(host); - host->card->state &= ~MMC_STATE_HIGHSPEED; + if (!err) { mmc_power_off(host); mmc_card_set_suspended(host->card); @@ -1190,7 +1181,6 @@ static int mmc_sd_power_restore(struct mmc_host *host) { int ret; - host->card->state &= ~MMC_STATE_HIGHSPEED; mmc_claim_host(host); ret = mmc_sd_init_card(host, host->card->ocr, host->card); mmc_release_host(host); diff --git a/drivers/mmc/core/sd.h b/drivers/mmc/core/sd.h index 4b34b24f3f7..aab824a9a7f 100644 --- a/drivers/mmc/core/sd.h +++ b/drivers/mmc/core/sd.h @@ -12,6 +12,5 @@ int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card, bool reinit); unsigned mmc_sd_get_max_clock(struct mmc_card *card); int mmc_sd_switch_hs(struct mmc_card *card); -void mmc_sd_go_highspeed(struct mmc_card *card); #endif diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 9933e426bc3..e636d9e99e4 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -363,7 +363,7 @@ static unsigned mmc_sdio_get_max_clock(struct mmc_card *card) { unsigned max_dtr; - if (mmc_card_highspeed(card)) { + if (mmc_card_hs(card)) { /* * The SDIO specification doesn't mention how * the CIS transfer speed register relates to @@ -733,7 +733,6 @@ try_again: mmc_set_clock(host, card->cis.max_dtr); if (card->cccr.high_speed) { - mmc_card_set_highspeed(card); mmc_set_timing(card->host, MMC_TIMING_SD_HS); } @@ -792,16 +791,13 @@ try_again: err = mmc_sdio_init_uhs_card(card); if (err) goto remove; - - /* Card is an ultra-high-speed card */ - mmc_card_set_uhs(card); } else { /* * Switch to high-speed (if supported). */ err = sdio_enable_hs(card); if (err > 0) - mmc_sd_go_highspeed(card); + mmc_set_timing(card->host, MMC_TIMING_SD_HS); else if (err) goto remove; diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio.c b/drivers/net/wireless/rsi/rsi_91x_sdio.c index 2e39d38d6a9..46e7af446f0 100644 --- a/drivers/net/wireless/rsi/rsi_91x_sdio.c +++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c @@ -285,7 +285,6 @@ static void rsi_reset_card(struct sdio_func *pfunction) if (err) { rsi_dbg(ERR_ZONE, "%s: CCCR speed reg read failed: %d\n", __func__, err); - card->state &= ~MMC_STATE_HIGHSPEED; } else { err = rsi_cmd52writebyte(card, SDIO_CCCR_SPEED, @@ -296,14 +295,13 @@ static void rsi_reset_card(struct sdio_func *pfunction) __func__, err); return; } - mmc_card_set_highspeed(card); host->ios.timing = MMC_TIMING_SD_HS; host->ops->set_ios(host, &host->ios); } } /* Set clock */ - if (mmc_card_highspeed(card)) + if (mmc_card_hs(card)) clock = 50000000; else clock = card->cis.max_dtr; diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index aa7e57f60fb..aadeaf155d0 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -194,6 +194,7 @@ struct sdio_cis { }; struct mmc_host; +struct mmc_ios; struct sdio_func; struct sdio_func_tuple; @@ -250,15 +251,11 @@ struct mmc_card { unsigned int state; /* (our) card state */ #define MMC_STATE_PRESENT (1<<0) /* present in sysfs */ #define MMC_STATE_READONLY (1<<1) /* card is read-only */ -#define MMC_STATE_HIGHSPEED (1<<2) /* card is in high speed mode */ -#define MMC_STATE_BLOCKADDR (1<<3) /* card uses block-addressing */ -#define MMC_STATE_HIGHSPEED_DDR (1<<4) /* card is in high speed mode */ -#define MMC_STATE_ULTRAHIGHSPEED (1<<5) /* card is in ultra high speed mode */ -#define MMC_CARD_SDXC (1<<6) /* card is SDXC */ -#define MMC_CARD_REMOVED (1<<7) /* card has been removed */ -#define MMC_STATE_HIGHSPEED_200 (1<<8) /* card is in HS200 mode */ -#define MMC_STATE_DOING_BKOPS (1<<10) /* card is doing BKOPS */ -#define MMC_STATE_SUSPENDED (1<<11) /* card is suspended */ +#define MMC_STATE_BLOCKADDR (1<<2) /* card uses block-addressing */ +#define MMC_CARD_SDXC (1<<3) /* card is SDXC */ +#define MMC_CARD_REMOVED (1<<4) /* card has been removed */ +#define MMC_STATE_DOING_BKOPS (1<<5) /* card is doing BKOPS */ +#define MMC_STATE_SUSPENDED (1<<6) /* card is suspended */ unsigned int quirks; /* card quirks */ #define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */ #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */ @@ -418,11 +415,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) #define mmc_card_present(c) ((c)->state & MMC_STATE_PRESENT) #define mmc_card_readonly(c) ((c)->state & MMC_STATE_READONLY) -#define mmc_card_highspeed(c) ((c)->state & MMC_STATE_HIGHSPEED) -#define mmc_card_hs200(c) ((c)->state & MMC_STATE_HIGHSPEED_200) #define mmc_card_blockaddr(c) ((c)->state & MMC_STATE_BLOCKADDR) -#define mmc_card_ddr_mode(c) ((c)->state & MMC_STATE_HIGHSPEED_DDR) -#define mmc_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED) #define mmc_card_ext_capacity(c) ((c)->state & MMC_CARD_SDXC) #define mmc_card_removed(c) ((c) && ((c)->state & MMC_CARD_REMOVED)) #define mmc_card_doing_bkops(c) ((c)->state & MMC_STATE_DOING_BKOPS) @@ -430,11 +423,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) #define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT) #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY) -#define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED) -#define mmc_card_set_hs200(c) ((c)->state |= MMC_STATE_HIGHSPEED_200) #define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR) -#define mmc_card_set_ddr_mode(c) ((c)->state |= MMC_STATE_HIGHSPEED_DDR) -#define mmc_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED) #define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC) #define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED) #define mmc_card_set_doing_bkops(c) ((c)->state |= MMC_STATE_DOING_BKOPS) diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 0cf705c8399..a4385377979 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -17,6 +17,7 @@ #include #include +#include #include struct mmc_ios { @@ -478,4 +479,26 @@ static inline unsigned int mmc_host_clk_rate(struct mmc_host *host) return host->ios.clock; } #endif + +static inline int mmc_card_hs(struct mmc_card *card) +{ + return card->host->ios.timing == MMC_TIMING_SD_HS || + card->host->ios.timing == MMC_TIMING_MMC_HS; +} + +static inline int mmc_card_uhs(struct mmc_card *card) +{ + return card->host->ios.timing >= MMC_TIMING_UHS_SDR12 && + card->host->ios.timing <= MMC_TIMING_UHS_DDR50; +} + +static inline bool mmc_card_hs200(struct mmc_card *card) +{ + return card->host->ios.timing == MMC_TIMING_MMC_HS200; +} + +static inline bool mmc_card_ddr52(struct mmc_card *card) +{ + return card->host->ios.timing == MMC_TIMING_MMC_DDR52; +} #endif /* LINUX_MMC_HOST_H */ -- cgit v1.2.3-70-g09d2 From 2415c0ef618b3cd95581c7f633cbab78b29b7ab0 Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Wed, 23 Apr 2014 17:07:58 +0900 Subject: mmc: identify available device type to select Device types which are supported by both host and device can be identified when EXT_CSD is read. There is no need to check host's capability anymore. Signed-off-by: Seungwon Jeon Tested-by: Jaehoon Chung Acked-by: Jaehoon Chung Signed-off-by: Ulf Hansson Signed-off-by: Chris Ball --- drivers/mmc/core/mmc.c | 72 ++++++++++++++++++++++++++---------------------- include/linux/mmc/card.h | 2 +- include/linux/mmc/host.h | 6 ---- include/linux/mmc/mmc.h | 12 +++++--- 4 files changed, 48 insertions(+), 44 deletions(-) (limited to 'drivers/mmc/core/mmc.c') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 31220529e17..b5691fee962 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -243,28 +243,46 @@ static void mmc_select_card_type(struct mmc_card *card) u8 card_type = card->ext_csd.raw_card_type & EXT_CSD_CARD_TYPE_MASK; u32 caps = host->caps, caps2 = host->caps2; unsigned int hs_max_dtr = 0; + unsigned int avail_type = 0; - if (card_type & EXT_CSD_CARD_TYPE_26) + if (caps & MMC_CAP_MMC_HIGHSPEED && + card_type & EXT_CSD_CARD_TYPE_HS_26) { hs_max_dtr = MMC_HIGH_26_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS_26; + } if (caps & MMC_CAP_MMC_HIGHSPEED && - card_type & EXT_CSD_CARD_TYPE_52) + card_type & EXT_CSD_CARD_TYPE_HS_52) { hs_max_dtr = MMC_HIGH_52_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS_52; + } - if ((caps & MMC_CAP_1_8V_DDR && - card_type & EXT_CSD_CARD_TYPE_DDR_1_8V) || - (caps & MMC_CAP_1_2V_DDR && - card_type & EXT_CSD_CARD_TYPE_DDR_1_2V)) + if (caps & MMC_CAP_1_8V_DDR && + card_type & EXT_CSD_CARD_TYPE_DDR_1_8V) { hs_max_dtr = MMC_HIGH_DDR_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_DDR_1_8V; + } + + if (caps & MMC_CAP_1_2V_DDR && + card_type & EXT_CSD_CARD_TYPE_DDR_1_2V) { + hs_max_dtr = MMC_HIGH_DDR_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_DDR_1_2V; + } - if ((caps2 & MMC_CAP2_HS200_1_8V_SDR && - card_type & EXT_CSD_CARD_TYPE_SDR_1_8V) || - (caps2 & MMC_CAP2_HS200_1_2V_SDR && - card_type & EXT_CSD_CARD_TYPE_SDR_1_2V)) + if (caps2 & MMC_CAP2_HS200_1_8V_SDR && + card_type & EXT_CSD_CARD_TYPE_HS200_1_8V) { hs_max_dtr = MMC_HS200_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS200_1_8V; + } + + if (caps2 & MMC_CAP2_HS200_1_2V_SDR && + card_type & EXT_CSD_CARD_TYPE_HS200_1_2V) { + hs_max_dtr = MMC_HS200_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS200_1_2V; + } card->ext_csd.hs_max_dtr = hs_max_dtr; - card->ext_csd.card_type = card_type; + card->mmc_avail_type = avail_type; } /* @@ -800,12 +818,10 @@ static int mmc_select_hs200(struct mmc_card *card) host = card->host; - if (card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_2V && - host->caps2 & MMC_CAP2_HS200_1_2V_SDR) + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_2V) err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120); - if (err && card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_8V && - host->caps2 & MMC_CAP2_HS200_1_8V_SDR) + if (err && card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_8V) err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180); /* If fails try again during next card power cycle */ @@ -1064,10 +1080,9 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, */ if (card->ext_csd.hs_max_dtr != 0) { err = 0; - if (card->ext_csd.hs_max_dtr > 52000000 && - host->caps2 & MMC_CAP2_HS200) + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200) err = mmc_select_hs200(card); - else if (host->caps & MMC_CAP_MMC_HIGHSPEED) + else if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS) err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING, 1, card->ext_csd.generic_cmd6_time, @@ -1081,13 +1096,11 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, mmc_hostname(card->host)); err = 0; } else { - if (card->ext_csd.hs_max_dtr > 52000000 && - host->caps2 & MMC_CAP2_HS200) { + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200) mmc_set_timing(card->host, MMC_TIMING_MMC_HS200); - } else { + else mmc_set_timing(card->host, MMC_TIMING_MMC_HS); - } } } @@ -1110,14 +1123,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, /* * Indicate DDR mode (if supported). */ - if (mmc_card_hs(card)) { - if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_8V) - && (host->caps & MMC_CAP_1_8V_DDR)) - ddr = MMC_1_8V_DDR_MODE; - else if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_2V) - && (host->caps & MMC_CAP_1_2V_DDR)) - ddr = MMC_1_2V_DDR_MODE; - } + if (mmc_card_hs(card)) + ddr = card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_52; /* * Indicate HS200 SDR mode (if supported). @@ -1137,8 +1144,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, * 3. set the clock to > 52Mhz <=200MHz and * 4. execute tuning for HS200 */ - if ((host->caps2 & MMC_CAP2_HS200) && - card->host->ops->execute_tuning) { + if (card->host->ops->execute_tuning) { mmc_host_clk_hold(card->host); err = card->host->ops->execute_tuning(card->host, MMC_SEND_TUNING_BLOCK_HS200); @@ -1247,7 +1253,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, * * WARNING: eMMC rules are NOT the same as SD DDR */ - if (ddr == MMC_1_2V_DDR_MODE) { + if (ddr & EXT_CSD_CARD_TYPE_DDR_1_2V) { err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120); if (err) diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index aadeaf155d0..fe31f8d89a0 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -68,7 +68,6 @@ struct mmc_ext_csd { #define MMC_HIGH_DDR_MAX_DTR 52000000 #define MMC_HS200_MAX_DTR 200000000 unsigned int sectors; - unsigned int card_type; unsigned int hc_erase_size; /* In sectors */ unsigned int hc_erase_timeout; /* In milliseconds */ unsigned int sec_trim_mult; /* Secure trim multiplier */ @@ -298,6 +297,7 @@ struct mmc_card { struct sdio_func_tuple *tuples; /* unknown common tuples */ unsigned int sd_bus_speed; /* Bus Speed Mode set for the card */ + unsigned int mmc_avail_type; /* supported device type by both host and card */ struct dentry *debugfs_root; struct mmc_part part[MMC_NUM_PHY_PARTITION]; /* physical partitions */ diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index a4385377979..6b1e9ee6ca1 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -62,12 +62,6 @@ struct mmc_ios { #define MMC_TIMING_MMC_DDR52 8 #define MMC_TIMING_MMC_HS200 9 -#define MMC_SDR_MODE 0 -#define MMC_1_2V_DDR_MODE 1 -#define MMC_1_8V_DDR_MODE 2 -#define MMC_1_2V_SDR_MODE 3 -#define MMC_1_8V_SDR_MODE 4 - unsigned char signal_voltage; /* signalling voltage (1.8V or 3.3V) */ #define MMC_SIGNAL_VOLTAGE_330 0 diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 50bcde3677c..f734c0c6457 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -354,18 +354,22 @@ struct _mmc_csd { #define EXT_CSD_CMD_SET_SECURE (1<<1) #define EXT_CSD_CMD_SET_CPSECURE (1<<2) -#define EXT_CSD_CARD_TYPE_26 (1<<0) /* Card can run at 26MHz */ -#define EXT_CSD_CARD_TYPE_52 (1<<1) /* Card can run at 52MHz */ #define EXT_CSD_CARD_TYPE_MASK 0x3F /* Mask out reserved bits */ +#define EXT_CSD_CARD_TYPE_HS_26 (1<<0) /* Card can run at 26MHz */ +#define EXT_CSD_CARD_TYPE_HS_52 (1<<1) /* Card can run at 52MHz */ +#define EXT_CSD_CARD_TYPE_HS (EXT_CSD_CARD_TYPE_HS_26 | \ + EXT_CSD_CARD_TYPE_HS_52) #define EXT_CSD_CARD_TYPE_DDR_1_8V (1<<2) /* Card can run at 52MHz */ /* DDR mode @1.8V or 3V I/O */ #define EXT_CSD_CARD_TYPE_DDR_1_2V (1<<3) /* Card can run at 52MHz */ /* DDR mode @1.2V I/O */ #define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \ | EXT_CSD_CARD_TYPE_DDR_1_2V) -#define EXT_CSD_CARD_TYPE_SDR_1_8V (1<<4) /* Card can run at 200MHz */ -#define EXT_CSD_CARD_TYPE_SDR_1_2V (1<<5) /* Card can run at 200MHz */ +#define EXT_CSD_CARD_TYPE_HS200_1_8V (1<<4) /* Card can run at 200MHz */ +#define EXT_CSD_CARD_TYPE_HS200_1_2V (1<<5) /* Card can run at 200MHz */ /* SDR mode @1.2V I/O */ +#define EXT_CSD_CARD_TYPE_HS200 (EXT_CSD_CARD_TYPE_HS200_1_8V | \ + EXT_CSD_CARD_TYPE_HS200_1_2V) #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ -- cgit v1.2.3-70-g09d2 From 2385049dd52b795f85f2165a6741f370c8493c06 Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Wed, 23 Apr 2014 17:08:05 +0900 Subject: mmc: step power class after final selection of bus mode Power class is changed once only after selection of bus modes including speed and bus-width finishes finally. Signed-off-by: Seungwon Jeon Tested-by: Jaehoon Chung Acked-by: Jaehoon Chung Signed-off-by: Ulf Hansson Signed-off-by: Chris Ball --- drivers/mmc/core/mmc.c | 96 +++++++++++++++++++++++++++++--------------------- 1 file changed, 55 insertions(+), 41 deletions(-) (limited to 'drivers/mmc/core/mmc.c') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index b5691fee962..4538541ac5a 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -724,17 +724,13 @@ static struct device_type mmc_type = { * extended CSD register, select it by executing the * mmc_switch command. */ -static int mmc_select_powerclass(struct mmc_card *card, - unsigned int bus_width) +static int __mmc_select_powerclass(struct mmc_card *card, + unsigned int bus_width) { - int err = 0; + struct mmc_host *host = card->host; + struct mmc_ext_csd *ext_csd = &card->ext_csd; unsigned int pwrclass_val = 0; - struct mmc_host *host; - - BUG_ON(!card); - - host = card->host; - BUG_ON(!host); + int err = 0; /* Power class selection is supported for versions >= 4.0 */ if (card->csd.mmca_vsn < CSD_SPEC_VER_4) @@ -746,14 +742,14 @@ static int mmc_select_powerclass(struct mmc_card *card, switch (1 << host->ios.vdd) { case MMC_VDD_165_195: - if (host->ios.clock <= 26000000) - pwrclass_val = card->ext_csd.raw_pwr_cl_26_195; - else if (host->ios.clock <= 52000000) + if (host->ios.clock <= MMC_HIGH_26_MAX_DTR) + pwrclass_val = ext_csd->raw_pwr_cl_26_195; + else if (host->ios.clock <= MMC_HIGH_52_MAX_DTR) pwrclass_val = (bus_width <= EXT_CSD_BUS_WIDTH_8) ? - card->ext_csd.raw_pwr_cl_52_195 : - card->ext_csd.raw_pwr_cl_ddr_52_195; - else if (host->ios.clock <= 200000000) - pwrclass_val = card->ext_csd.raw_pwr_cl_200_195; + ext_csd->raw_pwr_cl_52_195 : + ext_csd->raw_pwr_cl_ddr_52_195; + else if (host->ios.clock <= MMC_HS200_MAX_DTR) + pwrclass_val = ext_csd->raw_pwr_cl_200_195; break; case MMC_VDD_27_28: case MMC_VDD_28_29: @@ -764,14 +760,14 @@ static int mmc_select_powerclass(struct mmc_card *card, case MMC_VDD_33_34: case MMC_VDD_34_35: case MMC_VDD_35_36: - if (host->ios.clock <= 26000000) - pwrclass_val = card->ext_csd.raw_pwr_cl_26_360; - else if (host->ios.clock <= 52000000) + if (host->ios.clock <= MMC_HIGH_26_MAX_DTR) + pwrclass_val = ext_csd->raw_pwr_cl_26_360; + else if (host->ios.clock <= MMC_HIGH_52_MAX_DTR) pwrclass_val = (bus_width <= EXT_CSD_BUS_WIDTH_8) ? - card->ext_csd.raw_pwr_cl_52_360 : - card->ext_csd.raw_pwr_cl_ddr_52_360; - else if (host->ios.clock <= 200000000) - pwrclass_val = card->ext_csd.raw_pwr_cl_200_360; + ext_csd->raw_pwr_cl_52_360 : + ext_csd->raw_pwr_cl_ddr_52_360; + else if (host->ios.clock <= MMC_HS200_MAX_DTR) + pwrclass_val = ext_csd->raw_pwr_cl_200_360; break; default: pr_warning("%s: Voltage range not supported " @@ -797,6 +793,37 @@ static int mmc_select_powerclass(struct mmc_card *card, return err; } +static int mmc_select_powerclass(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + u32 bus_width, ext_csd_bits; + int err, ddr; + + /* Power class selection is supported for versions >= 4.0 */ + if (card->csd.mmca_vsn < CSD_SPEC_VER_4) + return 0; + + bus_width = host->ios.bus_width; + /* Power class values are defined only for 4/8 bit bus */ + if (bus_width == MMC_BUS_WIDTH_1) + return 0; + + ddr = card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_52; + if (ddr) + ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ? + EXT_CSD_DDR_BUS_WIDTH_8 : EXT_CSD_DDR_BUS_WIDTH_4; + else + ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ? + EXT_CSD_BUS_WIDTH_8 : EXT_CSD_BUS_WIDTH_4; + + err = __mmc_select_powerclass(card, ext_csd_bits); + if (err) + pr_warn("%s: power class selection to bus width %d ddr %d failed\n", + mmc_hostname(host), 1 << bus_width, ddr); + + return err; +} + /* * Selects the desired buswidth and switch to the HS200 mode * if bus width set without error @@ -1158,11 +1185,6 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ? EXT_CSD_BUS_WIDTH_8 : EXT_CSD_BUS_WIDTH_4; - err = mmc_select_powerclass(card, ext_csd_bits); - if (err) - pr_warning("%s: power class selection to bus width %d" - " failed\n", mmc_hostname(card->host), - 1 << bus_width); } /* @@ -1191,12 +1213,6 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, bus_width = bus_widths[idx]; if (bus_width == MMC_BUS_WIDTH_1) ddr = 0; /* no DDR for 1-bit width */ - err = mmc_select_powerclass(card, ext_csd_bits[idx][0]); - if (err) - pr_warning("%s: power class selection to " - "bus width %d failed\n", - mmc_hostname(card->host), - 1 << bus_width); err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH, @@ -1221,13 +1237,6 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, } if (!err && ddr) { - err = mmc_select_powerclass(card, ext_csd_bits[idx][1]); - if (err) - pr_warning("%s: power class selection to " - "bus width %d ddr %d failed\n", - mmc_hostname(card->host), - 1 << bus_width, ddr); - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH, ext_csd_bits[idx][1], @@ -1264,6 +1273,11 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, } } + /* + * Choose the power class with selected bus interface + */ + mmc_select_powerclass(card); + /* * Enable HPI feature (if supported) */ -- cgit v1.2.3-70-g09d2 From 577fb13199b11d8cd75609183649be4b5561243f Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Wed, 23 Apr 2014 17:08:44 +0900 Subject: mmc: rework selection of bus speed mode Current implementation for bus speed mode selection is too complicated. This patch is to simplify the codes and remove some duplicate parts. The following changes are including: * Adds functions for each mode selection(HS, HS-DDR, HS200 and etc) * Rearranged the mode selection sequence with supported device type * Adds maximum speed for HS200 mode(hs200_max_dtr) * Adds field definition for HS_TIMING of EXT_CSD Signed-off-by: Seungwon Jeon Tested-by: Jaehoon Chung Acked-by: Jaehoon Chung Signed-off-by: Ulf Hansson Signed-off-by: Chris Ball --- drivers/mmc/core/debugfs.c | 2 +- drivers/mmc/core/mmc.c | 431 ++++++++++++++++++++++++--------------------- include/linux/mmc/card.h | 1 + include/linux/mmc/mmc.h | 4 + 4 files changed, 238 insertions(+), 200 deletions(-) (limited to 'drivers/mmc/core/mmc.c') diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c index 509229b48b5..1f730dbfaee 100644 --- a/drivers/mmc/core/debugfs.c +++ b/drivers/mmc/core/debugfs.c @@ -139,7 +139,7 @@ static int mmc_ios_show(struct seq_file *s, void *data) str = "mmc DDR52"; break; case MMC_TIMING_MMC_HS200: - str = "mmc high-speed SDR200"; + str = "mmc HS200"; break; default: str = "invalid"; diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 4538541ac5a..bec6786efd1 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -242,7 +242,7 @@ static void mmc_select_card_type(struct mmc_card *card) struct mmc_host *host = card->host; u8 card_type = card->ext_csd.raw_card_type & EXT_CSD_CARD_TYPE_MASK; u32 caps = host->caps, caps2 = host->caps2; - unsigned int hs_max_dtr = 0; + unsigned int hs_max_dtr = 0, hs200_max_dtr = 0; unsigned int avail_type = 0; if (caps & MMC_CAP_MMC_HIGHSPEED && @@ -271,17 +271,18 @@ static void mmc_select_card_type(struct mmc_card *card) if (caps2 & MMC_CAP2_HS200_1_8V_SDR && card_type & EXT_CSD_CARD_TYPE_HS200_1_8V) { - hs_max_dtr = MMC_HS200_MAX_DTR; + hs200_max_dtr = MMC_HS200_MAX_DTR; avail_type |= EXT_CSD_CARD_TYPE_HS200_1_8V; } if (caps2 & MMC_CAP2_HS200_1_2V_SDR && card_type & EXT_CSD_CARD_TYPE_HS200_1_2V) { - hs_max_dtr = MMC_HS200_MAX_DTR; + hs200_max_dtr = MMC_HS200_MAX_DTR; avail_type |= EXT_CSD_CARD_TYPE_HS200_1_2V; } card->ext_csd.hs_max_dtr = hs_max_dtr; + card->ext_csd.hs200_max_dtr = hs200_max_dtr; card->mmc_avail_type = avail_type; } @@ -825,37 +826,46 @@ static int mmc_select_powerclass(struct mmc_card *card) } /* - * Selects the desired buswidth and switch to the HS200 mode - * if bus width set without error + * Set the bus speed for the selected speed mode. */ -static int mmc_select_hs200(struct mmc_card *card) +static void mmc_set_bus_speed(struct mmc_card *card) +{ + unsigned int max_dtr = (unsigned int)-1; + + if (mmc_card_hs200(card) && max_dtr > card->ext_csd.hs200_max_dtr) + max_dtr = card->ext_csd.hs200_max_dtr; + else if (mmc_card_hs(card) && max_dtr > card->ext_csd.hs_max_dtr) + max_dtr = card->ext_csd.hs_max_dtr; + else if (max_dtr > card->csd.max_dtr) + max_dtr = card->csd.max_dtr; + + mmc_set_clock(card->host, max_dtr); +} + +/* + * Select the bus width amoung 4-bit and 8-bit(SDR). + * If the bus width is changed successfully, return the selected width value. + * Zero is returned instead of error value if the wide width is not supported. + */ +static int mmc_select_bus_width(struct mmc_card *card) { - int idx, err = -EINVAL; - struct mmc_host *host; static unsigned ext_csd_bits[] = { - EXT_CSD_BUS_WIDTH_4, EXT_CSD_BUS_WIDTH_8, + EXT_CSD_BUS_WIDTH_4, }; static unsigned bus_widths[] = { - MMC_BUS_WIDTH_4, MMC_BUS_WIDTH_8, + MMC_BUS_WIDTH_4, }; + struct mmc_host *host = card->host; + unsigned idx, bus_width = 0; + int err = 0; - BUG_ON(!card); - - host = card->host; - - if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_2V) - err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120); - - if (err && card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_8V) - err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180); - - /* If fails try again during next card power cycle */ - if (err) - goto err; + if ((card->csd.mmca_vsn < CSD_SPEC_VER_4) && + !(host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) + return 0; - idx = (host->caps & MMC_CAP_8_BIT_DATA) ? 1 : 0; + idx = (host->caps & MMC_CAP_8_BIT_DATA) ? 0 : 1; /* * Unlike SD, MMC cards dont have a configuration register to notify @@ -863,8 +873,7 @@ static int mmc_select_hs200(struct mmc_card *card) * the supported bus width or compare the ext csd values of current * bus width and ext csd values of 1 bit mode read earlier. */ - for (; idx >= 0; idx--) { - + for (; idx < ARRAY_SIZE(bus_widths); idx++) { /* * Host is capable of 8bit transfer, then switch * the device to work in 8bit transfer mode. If the @@ -879,26 +888,201 @@ static int mmc_select_hs200(struct mmc_card *card) if (err) continue; - mmc_set_bus_width(card->host, bus_widths[idx]); + bus_width = bus_widths[idx]; + mmc_set_bus_width(host, bus_width); + /* + * If controller can't handle bus width test, + * compare ext_csd previously read in 1 bit mode + * against ext_csd at new bus width + */ if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST)) - err = mmc_compare_ext_csds(card, bus_widths[idx]); + err = mmc_compare_ext_csds(card, bus_width); else - err = mmc_bus_test(card, bus_widths[idx]); - if (!err) + err = mmc_bus_test(card, bus_width); + + if (!err) { + err = bus_width; break; + } else { + pr_warn("%s: switch to bus width %d failed\n", + mmc_hostname(host), ext_csd_bits[idx]); + } } - /* switch to HS200 mode if bus width set successfully */ + return err; +} + +/* + * Switch to the high-speed mode + */ +static int mmc_select_hs(struct mmc_card *card) +{ + int err; + + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HS_TIMING, EXT_CSD_TIMING_HS, + card->ext_csd.generic_cmd6_time, + true, true, true); if (!err) + mmc_set_timing(card->host, MMC_TIMING_MMC_HS); + + return err; +} + +/* + * Activate wide bus and DDR if supported. + */ +static int mmc_select_hs_ddr(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + u32 bus_width, ext_csd_bits; + int err = 0; + + if (!(card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_52)) + return 0; + + bus_width = host->ios.bus_width; + if (bus_width == MMC_BUS_WIDTH_1) + return 0; + + ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ? + EXT_CSD_DDR_BUS_WIDTH_8 : EXT_CSD_DDR_BUS_WIDTH_4; + + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_BUS_WIDTH, + ext_csd_bits, + card->ext_csd.generic_cmd6_time); + if (err) { + pr_warn("%s: switch to bus width %d ddr failed\n", + mmc_hostname(host), 1 << bus_width); + return err; + } + + /* + * eMMC cards can support 3.3V to 1.2V i/o (vccq) + * signaling. + * + * EXT_CSD_CARD_TYPE_DDR_1_8V means 3.3V or 1.8V vccq. + * + * 1.8V vccq at 3.3V core voltage (vcc) is not required + * in the JEDEC spec for DDR. + * + * Do not force change in vccq since we are obviously + * working and no change to vccq is needed. + * + * WARNING: eMMC rules are NOT the same as SD DDR + */ + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_1_2V) { + err = __mmc_set_signal_voltage(host, + MMC_SIGNAL_VOLTAGE_120); + if (err) + return err; + } + + mmc_set_timing(host, MMC_TIMING_MMC_DDR52); + + return err; +} + +/* + * For device supporting HS200 mode, the following sequence + * should be done before executing the tuning process. + * 1. set the desired bus width(4-bit or 8-bit, 1-bit is not supported) + * 2. switch to HS200 mode + * 3. set the clock to > 52Mhz and <=200MHz + */ +static int mmc_select_hs200(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + int err = -EINVAL; + + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_2V) + err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120); + + if (err && card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_8V) + err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180); + + /* If fails try again during next card power cycle */ + if (err) + goto err; + + /* + * Set the bus width(4 or 8) with host's support and + * switch to HS200 mode if bus width is set successfully. + */ + err = mmc_select_bus_width(card); + if (!IS_ERR_VALUE(err)) { err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_HS_TIMING, 2, - card->ext_csd.generic_cmd6_time, - true, true, true); + EXT_CSD_HS_TIMING, EXT_CSD_TIMING_HS200, + card->ext_csd.generic_cmd6_time, + true, true, true); + if (!err) + mmc_set_timing(host, MMC_TIMING_MMC_HS200); + } err: return err; } +/* + * Activate High Speed or HS200 mode if supported. + */ +static int mmc_select_timing(struct mmc_card *card) +{ + int err = 0; + + if ((card->csd.mmca_vsn < CSD_SPEC_VER_4 && + card->ext_csd.hs_max_dtr == 0)) + goto bus_speed; + + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200) + err = mmc_select_hs200(card); + else if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS) + err = mmc_select_hs(card); + + if (err && err != -EBADMSG) + return err; + + if (err) { + pr_warn("%s: switch to %s failed\n", + mmc_card_hs(card) ? "high-speed" : + (mmc_card_hs200(card) ? "hs200" : ""), + mmc_hostname(card->host)); + err = 0; + } + +bus_speed: + /* + * Set the bus speed to the selected bus timing. + * If timing is not selected, backward compatible is the default. + */ + mmc_set_bus_speed(card); + return err; +} + +/* + * Execute tuning sequence to seek the proper bus operating + * conditions for HS200, which sends CMD21 to the device. + */ +static int mmc_hs200_tuning(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + int err = 0; + + if (host->ops->execute_tuning) { + mmc_host_clk_hold(host); + err = host->ops->execute_tuning(host, + MMC_SEND_TUNING_BLOCK_HS200); + mmc_host_clk_release(host); + + if (err) + pr_warn("%s: tuning execution failed\n", + mmc_hostname(host)); + } + + return err; +} + /* * Handle the detection and initialisation of a card. * @@ -909,9 +1093,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, struct mmc_card *oldcard) { struct mmc_card *card; - int err, ddr = 0; + int err; u32 cid[4]; - unsigned int max_dtr; u32 rocr; u8 *ext_csd = NULL; @@ -1103,173 +1286,23 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, } /* - * Activate high speed (if supported) - */ - if (card->ext_csd.hs_max_dtr != 0) { - err = 0; - if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200) - err = mmc_select_hs200(card); - else if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS) - err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_HS_TIMING, 1, - card->ext_csd.generic_cmd6_time, - true, true, true); - - if (err && err != -EBADMSG) - goto free_card; - - if (err) { - pr_warning("%s: switch to highspeed failed\n", - mmc_hostname(card->host)); - err = 0; - } else { - if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200) - mmc_set_timing(card->host, - MMC_TIMING_MMC_HS200); - else - mmc_set_timing(card->host, MMC_TIMING_MMC_HS); - } - } - - /* - * Compute bus speed. - */ - max_dtr = (unsigned int)-1; - - if (mmc_card_hs(card) || mmc_card_hs200(card)) { - if (max_dtr > card->ext_csd.hs_max_dtr) - max_dtr = card->ext_csd.hs_max_dtr; - if (mmc_card_hs(card) && (max_dtr > 52000000)) - max_dtr = 52000000; - } else if (max_dtr > card->csd.max_dtr) { - max_dtr = card->csd.max_dtr; - } - - mmc_set_clock(host, max_dtr); - - /* - * Indicate DDR mode (if supported). + * Select timing interface */ - if (mmc_card_hs(card)) - ddr = card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_52; + err = mmc_select_timing(card); + if (err) + goto free_card; - /* - * Indicate HS200 SDR mode (if supported). - */ if (mmc_card_hs200(card)) { - u32 ext_csd_bits; - u32 bus_width = card->host->ios.bus_width; - - /* - * For devices supporting HS200 mode, the bus width has - * to be set before executing the tuning function. If - * set before tuning, then device will respond with CRC - * errors for responses on CMD line. So for HS200 the - * sequence will be - * 1. set bus width 4bit / 8 bit (1 bit not supported) - * 2. switch to HS200 mode - * 3. set the clock to > 52Mhz <=200MHz and - * 4. execute tuning for HS200 - */ - if (card->host->ops->execute_tuning) { - mmc_host_clk_hold(card->host); - err = card->host->ops->execute_tuning(card->host, - MMC_SEND_TUNING_BLOCK_HS200); - mmc_host_clk_release(card->host); - } - if (err) { - pr_warning("%s: tuning execution failed\n", - mmc_hostname(card->host)); + err = mmc_hs200_tuning(card); + if (err) goto err; - } - - ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ? - EXT_CSD_BUS_WIDTH_8 : EXT_CSD_BUS_WIDTH_4; - } - - /* - * Activate wide bus and DDR (if supported). - */ - if (!mmc_card_hs200(card) && - (card->csd.mmca_vsn >= CSD_SPEC_VER_4) && - (host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) { - static unsigned ext_csd_bits[][2] = { - { EXT_CSD_BUS_WIDTH_8, EXT_CSD_DDR_BUS_WIDTH_8 }, - { EXT_CSD_BUS_WIDTH_4, EXT_CSD_DDR_BUS_WIDTH_4 }, - { EXT_CSD_BUS_WIDTH_1, EXT_CSD_BUS_WIDTH_1 }, - }; - static unsigned bus_widths[] = { - MMC_BUS_WIDTH_8, - MMC_BUS_WIDTH_4, - MMC_BUS_WIDTH_1 - }; - unsigned idx, bus_width = 0; - - if (host->caps & MMC_CAP_8_BIT_DATA) - idx = 0; - else - idx = 1; - for (; idx < ARRAY_SIZE(bus_widths); idx++) { - bus_width = bus_widths[idx]; - if (bus_width == MMC_BUS_WIDTH_1) - ddr = 0; /* no DDR for 1-bit width */ - - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_BUS_WIDTH, - ext_csd_bits[idx][0], - card->ext_csd.generic_cmd6_time); - if (!err) { - mmc_set_bus_width(card->host, bus_width); - - /* - * If controller can't handle bus width test, - * compare ext_csd previously read in 1 bit mode - * against ext_csd at new bus width - */ - if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST)) - err = mmc_compare_ext_csds(card, - bus_width); - else - err = mmc_bus_test(card, bus_width); - if (!err) - break; - } - } - - if (!err && ddr) { - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_BUS_WIDTH, - ext_csd_bits[idx][1], - card->ext_csd.generic_cmd6_time); - } - if (err) { - pr_warning("%s: switch to bus width %d ddr %d " - "failed\n", mmc_hostname(card->host), - 1 << bus_width, ddr); - goto free_card; - } else if (ddr) { - /* - * eMMC cards can support 3.3V to 1.2V i/o (vccq) - * signaling. - * - * EXT_CSD_CARD_TYPE_DDR_1_8V means 3.3V or 1.8V vccq. - * - * 1.8V vccq at 3.3V core voltage (vcc) is not required - * in the JEDEC spec for DDR. - * - * Do not force change in vccq since we are obviously - * working and no change to vccq is needed. - * - * WARNING: eMMC rules are NOT the same as SD DDR - */ - if (ddr & EXT_CSD_CARD_TYPE_DDR_1_2V) { - err = __mmc_set_signal_voltage(host, - MMC_SIGNAL_VOLTAGE_120); - if (err) - goto err; - } - mmc_set_timing(card->host, MMC_TIMING_MMC_DDR52); - mmc_set_bus_width(card->host, bus_width); + } else if (mmc_card_hs(card)) { + /* Select the desired bus width optionally */ + err = mmc_select_bus_width(card); + if (!IS_ERR_VALUE(err)) { + err = mmc_select_hs_ddr(card); + if (err) + goto err; } } diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index fe31f8d89a0..17607369287 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -63,6 +63,7 @@ struct mmc_ext_csd { unsigned int power_off_longtime; /* Units: ms */ u8 power_off_notification; /* state */ unsigned int hs_max_dtr; + unsigned int hs200_max_dtr; #define MMC_HIGH_26_MAX_DTR 26000000 #define MMC_HIGH_52_MAX_DTR 52000000 #define MMC_HIGH_DDR_MAX_DTR 52000000 diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index f734c0c6457..f429f13be43 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -377,6 +377,10 @@ struct _mmc_csd { #define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */ #define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */ +#define EXT_CSD_TIMING_BC 0 /* Backwards compatility */ +#define EXT_CSD_TIMING_HS 1 /* High speed */ +#define EXT_CSD_TIMING_HS200 2 /* HS200 */ + #define EXT_CSD_SEC_ER_EN BIT(0) #define EXT_CSD_SEC_BD_BLK_EN BIT(2) #define EXT_CSD_SEC_GB_CL_EN BIT(4) -- cgit v1.2.3-70-g09d2 From 0a5b6438ee482696360bb013e67b8488f63d3e9e Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Wed, 23 Apr 2014 17:14:58 +0900 Subject: mmc: add support for HS400 mode of eMMC5.0 This patch adds HS400 mode support for eMMC5.0 device. HS400 mode is high speed DDR interface timing from HS200. Clock frequency is up to 200MHz and only 8-bit bus width is supported. In addition, tuning process of HS200 is required to synchronize the command response on the CMD line because CMD input timing for HS400 mode is the same as HS200 mode. Signed-off-by: Seungwon Jeon Reviewed-by: Jackey Shen Tested-by: Jaehoon Chung Acked-by: Jaehoon Chung Signed-off-by: Ulf Hansson Signed-off-by: Chris Ball --- drivers/mmc/core/bus.c | 1 + drivers/mmc/core/debugfs.c | 3 ++ drivers/mmc/core/mmc.c | 98 +++++++++++++++++++++++++++++++++++++++++++--- include/linux/mmc/card.h | 1 + include/linux/mmc/host.h | 14 +++++++ include/linux/mmc/mmc.h | 7 +++- 6 files changed, 118 insertions(+), 6 deletions(-) (limited to 'drivers/mmc/core/mmc.c') diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index f37e9d6af84..d2dbf02022b 100644 --- a/drivers/mmc/core/bus.c +++ b/drivers/mmc/core/bus.c @@ -349,6 +349,7 @@ int mmc_add_card(struct mmc_card *card) mmc_hostname(card->host), mmc_card_uhs(card) ? "ultra high speed " : (mmc_card_hs(card) ? "high speed " : ""), + mmc_card_hs400(card) ? "HS400 " : (mmc_card_hs200(card) ? "HS200 " : ""), mmc_card_ddr52(card) ? "DDR " : "", uhs_bus_speed_mode, type, card->rca); diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c index 1f730dbfaee..91eb1622324 100644 --- a/drivers/mmc/core/debugfs.c +++ b/drivers/mmc/core/debugfs.c @@ -141,6 +141,9 @@ static int mmc_ios_show(struct seq_file *s, void *data) case MMC_TIMING_MMC_HS200: str = "mmc HS200"; break; + case MMC_TIMING_MMC_HS400: + str = "mmc HS400"; + break; default: str = "invalid"; break; diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index bec6786efd1..793c6f7ddb0 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -240,7 +240,7 @@ static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd) static void mmc_select_card_type(struct mmc_card *card) { struct mmc_host *host = card->host; - u8 card_type = card->ext_csd.raw_card_type & EXT_CSD_CARD_TYPE_MASK; + u8 card_type = card->ext_csd.raw_card_type; u32 caps = host->caps, caps2 = host->caps2; unsigned int hs_max_dtr = 0, hs200_max_dtr = 0; unsigned int avail_type = 0; @@ -281,6 +281,18 @@ static void mmc_select_card_type(struct mmc_card *card) avail_type |= EXT_CSD_CARD_TYPE_HS200_1_2V; } + if (caps2 & MMC_CAP2_HS400_1_8V && + card_type & EXT_CSD_CARD_TYPE_HS400_1_8V) { + hs200_max_dtr = MMC_HS200_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS400_1_8V; + } + + if (caps2 & MMC_CAP2_HS400_1_2V && + card_type & EXT_CSD_CARD_TYPE_HS400_1_2V) { + hs200_max_dtr = MMC_HS200_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS400_1_2V; + } + card->ext_csd.hs_max_dtr = hs_max_dtr; card->ext_csd.hs200_max_dtr = hs200_max_dtr; card->mmc_avail_type = avail_type; @@ -499,6 +511,8 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) ext_csd[EXT_CSD_PWR_CL_DDR_52_195]; card->ext_csd.raw_pwr_cl_ddr_52_360 = ext_csd[EXT_CSD_PWR_CL_DDR_52_360]; + card->ext_csd.raw_pwr_cl_ddr_200_360 = + ext_csd[EXT_CSD_PWR_CL_DDR_200_360]; } if (card->ext_csd.rev >= 5) { @@ -665,7 +679,10 @@ static int mmc_compare_ext_csds(struct mmc_card *card, unsigned bus_width) (card->ext_csd.raw_pwr_cl_ddr_52_195 == bw_ext_csd[EXT_CSD_PWR_CL_DDR_52_195]) && (card->ext_csd.raw_pwr_cl_ddr_52_360 == - bw_ext_csd[EXT_CSD_PWR_CL_DDR_52_360])); + bw_ext_csd[EXT_CSD_PWR_CL_DDR_52_360]) && + (card->ext_csd.raw_pwr_cl_ddr_200_360 == + bw_ext_csd[EXT_CSD_PWR_CL_DDR_200_360])); + if (err) err = -EINVAL; @@ -768,7 +785,9 @@ static int __mmc_select_powerclass(struct mmc_card *card, ext_csd->raw_pwr_cl_52_360 : ext_csd->raw_pwr_cl_ddr_52_360; else if (host->ios.clock <= MMC_HS200_MAX_DTR) - pwrclass_val = ext_csd->raw_pwr_cl_200_360; + pwrclass_val = (bus_width == EXT_CSD_DDR_BUS_WIDTH_8) ? + ext_csd->raw_pwr_cl_ddr_200_360 : + ext_csd->raw_pwr_cl_200_360; break; default: pr_warning("%s: Voltage range not supported " @@ -832,7 +851,8 @@ static void mmc_set_bus_speed(struct mmc_card *card) { unsigned int max_dtr = (unsigned int)-1; - if (mmc_card_hs200(card) && max_dtr > card->ext_csd.hs200_max_dtr) + if ((mmc_card_hs200(card) || mmc_card_hs400(card)) && + max_dtr > card->ext_csd.hs200_max_dtr) max_dtr = card->ext_csd.hs200_max_dtr; else if (mmc_card_hs(card) && max_dtr > card->ext_csd.hs_max_dtr) max_dtr = card->ext_csd.hs_max_dtr; @@ -985,6 +1005,61 @@ static int mmc_select_hs_ddr(struct mmc_card *card) return err; } +static int mmc_select_hs400(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + int err = 0; + + /* + * HS400 mode requires 8-bit bus width + */ + if (!(card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400 && + host->ios.bus_width == MMC_BUS_WIDTH_8)) + return 0; + + /* + * Before switching to dual data rate operation for HS400, + * it is required to convert from HS200 mode to HS mode. + */ + mmc_set_timing(card->host, MMC_TIMING_MMC_HS); + mmc_set_bus_speed(card); + + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HS_TIMING, EXT_CSD_TIMING_HS, + card->ext_csd.generic_cmd6_time, + true, true, true); + if (err) { + pr_warn("%s: switch to high-speed from hs200 failed, err:%d\n", + mmc_hostname(host), err); + return err; + } + + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_BUS_WIDTH, + EXT_CSD_DDR_BUS_WIDTH_8, + card->ext_csd.generic_cmd6_time); + if (err) { + pr_warn("%s: switch to bus width for hs400 failed, err:%d\n", + mmc_hostname(host), err); + return err; + } + + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HS_TIMING, EXT_CSD_TIMING_HS400, + card->ext_csd.generic_cmd6_time, + true, true, true); + if (err) { + pr_warn("%s: switch to hs400 failed, err:%d\n", + mmc_hostname(host), err); + return err; + } + + mmc_set_timing(host, MMC_TIMING_MMC_HS400); + mmc_set_bus_speed(card); + + return 0; +} + /* * For device supporting HS200 mode, the following sequence * should be done before executing the tuning process. @@ -1062,13 +1137,22 @@ bus_speed: /* * Execute tuning sequence to seek the proper bus operating - * conditions for HS200, which sends CMD21 to the device. + * conditions for HS200 and HS400, which sends CMD21 to the device. */ static int mmc_hs200_tuning(struct mmc_card *card) { struct mmc_host *host = card->host; int err = 0; + /* + * Timing should be adjusted to the HS400 target + * operation frequency for tuning process + */ + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400 && + host->ios.bus_width == MMC_BUS_WIDTH_8) + if (host->ops->prepare_hs400_tuning) + host->ops->prepare_hs400_tuning(host, &host->ios); + if (host->ops->execute_tuning) { mmc_host_clk_hold(host); err = host->ops->execute_tuning(host, @@ -1296,6 +1380,10 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, err = mmc_hs200_tuning(card); if (err) goto err; + + err = mmc_select_hs400(card); + if (err) + goto err; } else if (mmc_card_hs(card)) { /* Select the desired bus width optionally */ err = mmc_select_bus_width(card); diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 17607369287..d424b9de3af 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -110,6 +110,7 @@ struct mmc_ext_csd { u8 raw_pwr_cl_200_360; /* 237 */ u8 raw_pwr_cl_ddr_52_195; /* 238 */ u8 raw_pwr_cl_ddr_52_360; /* 239 */ + u8 raw_pwr_cl_ddr_200_360; /* 253 */ u8 raw_bkops_status; /* 246 */ u8 raw_sectors[4]; /* 212 - 4 bytes */ diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 6b1e9ee6ca1..18308737421 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -61,6 +61,7 @@ struct mmc_ios { #define MMC_TIMING_UHS_DDR50 7 #define MMC_TIMING_MMC_DDR52 8 #define MMC_TIMING_MMC_HS200 9 +#define MMC_TIMING_MMC_HS400 10 unsigned char signal_voltage; /* signalling voltage (1.8V or 3.3V) */ @@ -132,6 +133,9 @@ struct mmc_host_ops { /* The tuning command opcode value is different for SD and eMMC cards */ int (*execute_tuning)(struct mmc_host *host, u32 opcode); + + /* Prepare HS400 target operating frequency depending host driver */ + int (*prepare_hs400_tuning)(struct mmc_host *host, struct mmc_ios *ios); int (*select_drive_strength)(unsigned int max_dtr, int host_drv, int card_drv); void (*hw_reset)(struct mmc_host *host); void (*card_event)(struct mmc_host *host); @@ -274,6 +278,10 @@ struct mmc_host { #define MMC_CAP2_PACKED_CMD (MMC_CAP2_PACKED_RD | \ MMC_CAP2_PACKED_WR) #define MMC_CAP2_NO_PRESCAN_POWERUP (1 << 14) /* Don't power up before scan */ +#define MMC_CAP2_HS400_1_8V (1 << 15) /* Can support HS400 1.8V */ +#define MMC_CAP2_HS400_1_2V (1 << 16) /* Can support HS400 1.2V */ +#define MMC_CAP2_HS400 (MMC_CAP2_HS400_1_8V | \ + MMC_CAP2_HS400_1_2V) mmc_pm_flag_t pm_caps; /* supported pm features */ @@ -495,4 +503,10 @@ static inline bool mmc_card_ddr52(struct mmc_card *card) { return card->host->ios.timing == MMC_TIMING_MMC_DDR52; } + +static inline bool mmc_card_hs400(struct mmc_card *card) +{ + return card->host->ios.timing == MMC_TIMING_MMC_HS400; +} + #endif /* LINUX_MMC_HOST_H */ diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index f429f13be43..64ec963ed34 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -325,6 +325,7 @@ struct _mmc_csd { #define EXT_CSD_POWER_OFF_LONG_TIME 247 /* RO */ #define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */ #define EXT_CSD_CACHE_SIZE 249 /* RO, 4 bytes */ +#define EXT_CSD_PWR_CL_DDR_200_360 253 /* RO */ #define EXT_CSD_TAG_UNIT_SIZE 498 /* RO */ #define EXT_CSD_DATA_TAG_SUPPORT 499 /* RO */ #define EXT_CSD_MAX_PACKED_WRITES 500 /* RO */ @@ -354,7 +355,6 @@ struct _mmc_csd { #define EXT_CSD_CMD_SET_SECURE (1<<1) #define EXT_CSD_CMD_SET_CPSECURE (1<<2) -#define EXT_CSD_CARD_TYPE_MASK 0x3F /* Mask out reserved bits */ #define EXT_CSD_CARD_TYPE_HS_26 (1<<0) /* Card can run at 26MHz */ #define EXT_CSD_CARD_TYPE_HS_52 (1<<1) /* Card can run at 52MHz */ #define EXT_CSD_CARD_TYPE_HS (EXT_CSD_CARD_TYPE_HS_26 | \ @@ -370,6 +370,10 @@ struct _mmc_csd { /* SDR mode @1.2V I/O */ #define EXT_CSD_CARD_TYPE_HS200 (EXT_CSD_CARD_TYPE_HS200_1_8V | \ EXT_CSD_CARD_TYPE_HS200_1_2V) +#define EXT_CSD_CARD_TYPE_HS400_1_8V (1<<6) /* Card can run at 200MHz DDR, 1.8V */ +#define EXT_CSD_CARD_TYPE_HS400_1_2V (1<<7) /* Card can run at 200MHz DDR, 1.2V */ +#define EXT_CSD_CARD_TYPE_HS400 (EXT_CSD_CARD_TYPE_HS400_1_8V | \ + EXT_CSD_CARD_TYPE_HS400_1_2V) #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ @@ -380,6 +384,7 @@ struct _mmc_csd { #define EXT_CSD_TIMING_BC 0 /* Backwards compatility */ #define EXT_CSD_TIMING_HS 1 /* High speed */ #define EXT_CSD_TIMING_HS200 2 /* HS200 */ +#define EXT_CSD_TIMING_HS400 3 /* HS400 */ #define EXT_CSD_SEC_ER_EN BIT(0) #define EXT_CSD_SEC_BD_BLK_EN BIT(2) -- cgit v1.2.3-70-g09d2