From 6e996ee8e730a50eef51cdb072b166fe8f80831e Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 4 Feb 2008 18:12:48 +0100 Subject: at91_mci: use generic GPIO calls Update the AT91 MMC driver to use the generic GPIO calls instead of the AT91-specific calls; and to request (and release) those GPIO signals. That required updating the probe() fault cleanup codepaths. Now there is a single sequence for freeing resources, in reverse order of their allocation. Also that code uses use dev_*() for messaging, and has less abuse of KERN_ERR. Likewise with updating remove() cleanup. This had to free the GPIOs, and while adding that code I noticed and fixed two other problems: it was poking at a workqueue owned by the mmc core; and in one (rare) case would try freeing an IRQ that it didn't allocate. Signed-off-by: David Brownell Signed-off-by: Nicolas Ferre Signed-off-by: Pierre Ossman --- drivers/mmc/host/at91_mci.c | 114 +++++++++++++++++++++++++++++++------------- 1 file changed, 80 insertions(+), 34 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c index b1edcefdd4f..21acecc9fe3 100644 --- a/drivers/mmc/host/at91_mci.c +++ b/drivers/mmc/host/at91_mci.c @@ -70,10 +70,11 @@ #include #include +#include + #include #include #include -#include #include #define DRIVER_NAME "at91_mci" @@ -659,11 +660,11 @@ static void at91_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (host->board->vcc_pin) { switch (ios->power_mode) { case MMC_POWER_OFF: - at91_set_gpio_value(host->board->vcc_pin, 0); + gpio_set_value(host->board->vcc_pin, 0); break; case MMC_POWER_UP: case MMC_POWER_ON: - at91_set_gpio_value(host->board->vcc_pin, 1); + gpio_set_value(host->board->vcc_pin, 1); break; } } @@ -768,7 +769,7 @@ static irqreturn_t at91_mci_irq(int irq, void *devid) static irqreturn_t at91_mmc_det_irq(int irq, void *_host) { struct at91mci_host *host = _host; - int present = !at91_get_gpio_value(irq); + int present = !gpio_get_value(irq_to_gpio(irq)); /* * we expect this irq on both insert and remove, @@ -793,7 +794,7 @@ static int at91_mci_get_ro(struct mmc_host *mmc) struct at91mci_host *host = mmc_priv(mmc); if (host->board->wp_pin) { - read_only = at91_get_gpio_value(host->board->wp_pin); + read_only = gpio_get_value(host->board->wp_pin); printk(KERN_WARNING "%s: card is %s\n", mmc_hostname(mmc), (read_only ? "read-only" : "read-write") ); } @@ -820,8 +821,6 @@ static int __init at91_mci_probe(struct platform_device *pdev) struct resource *res; int ret; - pr_debug("Probe MCI devices\n"); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) return -ENXIO; @@ -831,9 +830,9 @@ static int __init at91_mci_probe(struct platform_device *pdev) mmc = mmc_alloc_host(sizeof(struct at91mci_host), &pdev->dev); if (!mmc) { - pr_debug("Failed to allocate mmc host\n"); - release_mem_region(res->start, res->end - res->start + 1); - return -ENOMEM; + ret = -ENOMEM; + dev_dbg(&pdev->dev, "couldn't allocate mmc host\n"); + goto fail6; } mmc->ops = &at91_mci_ops; @@ -853,19 +852,44 @@ static int __init at91_mci_probe(struct platform_device *pdev) if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) mmc->caps |= MMC_CAP_4_BIT_DATA; else - printk("AT91 MMC: 4 wire bus mode not supported" + dev_warn(&pdev->dev, "4 wire bus mode not supported" " - using 1 wire\n"); } + /* + * Reserve GPIOs ... board init code makes sure these pins are set + * up as GPIOs with the right direction (input, except for vcc) + */ + if (host->board->det_pin) { + ret = gpio_request(host->board->det_pin, "mmc_detect"); + if (ret < 0) { + dev_dbg(&pdev->dev, "couldn't claim card detect pin\n"); + goto fail5; + } + } + if (host->board->wp_pin) { + ret = gpio_request(host->board->wp_pin, "mmc_wp"); + if (ret < 0) { + dev_dbg(&pdev->dev, "couldn't claim wp sense pin\n"); + goto fail4; + } + } + if (host->board->vcc_pin) { + ret = gpio_request(host->board->vcc_pin, "mmc_vcc"); + if (ret < 0) { + dev_dbg(&pdev->dev, "couldn't claim vcc switch pin\n"); + goto fail3; + } + } + /* * Get Clock */ host->mci_clk = clk_get(&pdev->dev, "mci_clk"); if (IS_ERR(host->mci_clk)) { - printk(KERN_ERR "AT91 MMC: no clock defined.\n"); - mmc_free_host(mmc); - release_mem_region(res->start, res->end - res->start + 1); - return -ENODEV; + ret = -ENODEV; + dev_dbg(&pdev->dev, "no mci_clk?\n"); + goto fail2; } /* @@ -873,10 +897,8 @@ static int __init at91_mci_probe(struct platform_device *pdev) */ host->baseaddr = ioremap(res->start, res->end - res->start + 1); if (!host->baseaddr) { - clk_put(host->mci_clk); - mmc_free_host(mmc); - release_mem_region(res->start, res->end - res->start + 1); - return -ENOMEM; + ret = -ENOMEM; + goto fail1; } /* @@ -890,15 +912,11 @@ static int __init at91_mci_probe(struct platform_device *pdev) * Allocate the MCI interrupt */ host->irq = platform_get_irq(pdev, 0); - ret = request_irq(host->irq, at91_mci_irq, IRQF_SHARED, DRIVER_NAME, host); + ret = request_irq(host->irq, at91_mci_irq, IRQF_SHARED, + mmc_hostname(mmc), host); if (ret) { - printk(KERN_ERR "AT91 MMC: Failed to request MCI interrupt\n"); - clk_disable(host->mci_clk); - clk_put(host->mci_clk); - mmc_free_host(mmc); - iounmap(host->baseaddr); - release_mem_region(res->start, res->end - res->start + 1); - return ret; + dev_dbg(&pdev->dev, "request MCI interrupt failed\n"); + goto fail0; } platform_set_drvdata(pdev, mmc); @@ -907,8 +925,7 @@ static int __init at91_mci_probe(struct platform_device *pdev) * Add host to MMC layer */ if (host->board->det_pin) { - host->present = !at91_get_gpio_value(host->board->det_pin); - device_init_wakeup(&pdev->dev, 1); + host->present = !gpio_get_value(host->board->det_pin); } else host->present = -1; @@ -919,15 +936,38 @@ static int __init at91_mci_probe(struct platform_device *pdev) * monitor card insertion/removal if we can */ if (host->board->det_pin) { - ret = request_irq(host->board->det_pin, at91_mmc_det_irq, - 0, DRIVER_NAME, host); + ret = request_irq(gpio_to_irq(host->board->det_pin), + at91_mmc_det_irq, 0, mmc_hostname(mmc), host); if (ret) - printk(KERN_ERR "AT91 MMC: Couldn't allocate MMC detect irq\n"); + dev_warn(&pdev->dev, "request MMC detect irq failed\n"); + else + device_init_wakeup(&pdev->dev, 1); } pr_debug("Added MCI driver\n"); return 0; + +fail0: + clk_disable(host->mci_clk); + iounmap(host->baseaddr); +fail1: + clk_put(host->mci_clk); +fail2: + if (host->board->vcc_pin) + gpio_free(host->board->vcc_pin); +fail3: + if (host->board->wp_pin) + gpio_free(host->board->wp_pin); +fail4: + if (host->board->det_pin) + gpio_free(host->board->det_pin); +fail5: + mmc_free_host(mmc); +fail6: + release_mem_region(res->start, res->end - res->start + 1); + dev_err(&pdev->dev, "probe failed, err %d\n", ret); + return ret; } /* @@ -945,9 +985,10 @@ static int __exit at91_mci_remove(struct platform_device *pdev) host = mmc_priv(mmc); if (host->board->det_pin) { + if (device_can_wakeup(&pdev->dev)) + free_irq(gpio_to_irq(host->board->det_pin), host); device_init_wakeup(&pdev->dev, 0); - free_irq(host->board->det_pin, host); - cancel_delayed_work(&host->mmc->detect); + gpio_free(host->board->det_pin); } at91_mci_disable(host); @@ -957,6 +998,11 @@ static int __exit at91_mci_remove(struct platform_device *pdev) clk_disable(host->mci_clk); /* Disable the peripheral clock */ clk_put(host->mci_clk); + if (host->board->vcc_pin) + gpio_free(host->board->vcc_pin); + if (host->board->wp_pin) + gpio_free(host->board->wp_pin); + iounmap(host->baseaddr); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); release_mem_region(res->start, res->end - res->start + 1); -- cgit v1.2.3-70-g09d2