From dcfb81d61da1367e52f7f7e3ceff0d0044c3c7ee Mon Sep 17 00:00:00 2001 From: David Griego Date: Tue, 30 Nov 2010 15:32:05 +0530 Subject: mtd: NOR flash driver for OMAP-L137/AM17x OMAP-L137/AM17x has limited number of dedicated EMIFA address pins, enough to interface directly to an SDRAM. If a device such as an asynchronous flash needs to be attached to the EMIFA, then either GPIO pins or a chip select may be used to control the flash device's upper address lines. This patch adds support for the NOR flash on the OMAP-L137/ AM17x user interface daughter board using the latch-addr-flash MTD mapping driver which allows flashes to be partially physically addressed. The upper address lines are set by a board specific code which is a separate patch. Signed-off-by: David Griego Signed-off-by: Aleksey Makarov Signed-off-by: Sergei Shtylyov Signed-off-by: Savinay Dharmappa Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/maps/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/mtd/maps/Makefile') diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index c7869c7a6b1..08533bd5cba 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -59,3 +59,4 @@ obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o obj-$(CONFIG_MTD_VMU) += vmu-flash.o obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o obj-$(CONFIG_MTD_BCM963XX) += bcm963xx-flash.o +obj-$(CONFIG_MTD_LATCH_ADDR) += latch-addr-flash.o -- cgit v1.2.3-70-g09d2