From 4aa6ae3ecca04d7956817170418c74861ce071de Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Sat, 31 Mar 2012 22:36:57 -0400 Subject: mtd: gpmi: do not include the mxs.h The mxs.h does not exit in the mx6q. So rewrite the __mxs_clrl()/__mxs_setl() and remove the mxs.h. Signed-off-by: Huang Shijie Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers/mtd/nand/gpmi-nand') diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c index e8ea7107932..fa5200b8c89 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c @@ -21,7 +21,6 @@ #include #include #include -#include #include "gpmi-nand.h" #include "gpmi-regs.h" @@ -37,6 +36,8 @@ struct timing_threshod timing_default_threshold = { .max_dll_delay_in_ns = 16, }; +#define MXS_SET_ADDR 0x4 +#define MXS_CLR_ADDR 0x8 /* * Clear the bit and poll it cleared. This is usually called with * a reset address and mask being either SFTRST(bit 31) or CLKGATE @@ -47,7 +48,7 @@ static int clear_poll_bit(void __iomem *addr, u32 mask) int timeout = 0x400; /* clear the bit */ - __mxs_clrl(mask, addr); + writel(mask, addr + MXS_CLR_ADDR); /* * SFTRST needs 3 GPMI clocks to settle, the reference manual @@ -92,11 +93,11 @@ static int gpmi_reset_block(void __iomem *reset_addr, bool just_enable) goto error; /* clear CLKGATE */ - __mxs_clrl(MODULE_CLKGATE, reset_addr); + writel(MODULE_CLKGATE, reset_addr + MXS_CLR_ADDR); if (!just_enable) { /* set SFTRST to reset the block */ - __mxs_setl(MODULE_SFTRST, reset_addr); + writel(MODULE_SFTRST, reset_addr + MXS_SET_ADDR); udelay(1); /* poll CLKGATE becoming set */ -- cgit v1.2.3-70-g09d2