From d37e02d8f3a892b57738f1c1431779d5939214d1 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Thu, 13 Sep 2012 14:57:56 +0800 Subject: mtd: gpmi: add a new field for HW_GPMI_CTRL1 add the WRN_DLY_SEL field for HW_GPMI_CTRL1. This field is used as delay for gpmi write strobe. Signed-off-by: Huang Shijie Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 6 ++++++ drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 2 ++ drivers/mtd/nand/gpmi-nand/gpmi-regs.h | 9 +++++++++ 3 files changed, 17 insertions(+) (limited to 'drivers/mtd/nand/gpmi-nand') diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c index 41e905dfc39..2d1f77c0527 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c @@ -731,6 +731,7 @@ return_results: hw->use_half_periods = dll_use_half_periods; hw->sample_delay_factor = sample_delay_factor; hw->device_busy_timeout = GPMI_DEFAULT_BUSY_TIMEOUT; + hw->wrn_dly_sel = BV_GPMI_CTRL1_WRN_DLY_SEL_4_TO_8NS; /* Return success. */ return 0; @@ -769,6 +770,11 @@ void gpmi_begin(struct gpmi_nand_data *this) /* [3] The following code is to set the HW_GPMI_CTRL1. */ + /* Set the WRN_DLY_SEL */ + writel(BM_GPMI_CTRL1_WRN_DLY_SEL, gpmi_regs + HW_GPMI_CTRL1_CLR); + writel(BF_GPMI_CTRL1_WRN_DLY_SEL(hw.wrn_dly_sel), + gpmi_regs + HW_GPMI_CTRL1_SET); + /* DLL_ENABLE must be set to 0 when setting RDN_DELAY or HALF_PERIOD. */ writel(BM_GPMI_CTRL1_DLL_ENABLE, gpmi_regs + HW_GPMI_CTRL1_CLR); diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h index c814bddaffc..5c11e761a32 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h @@ -195,6 +195,7 @@ struct gpmi_nand_data { * @use_half_periods: Indicates the clock is running slowly, so the * NFC DLL should use half-periods. * @sample_delay_factor: The sample delay factor. + * @wrn_dly_sel: The delay on the GPMI write strobe. */ struct gpmi_nfc_hardware_timing { /* for HW_GPMI_TIMING0 */ @@ -209,6 +210,7 @@ struct gpmi_nfc_hardware_timing { /* for HW_GPMI_CTRL1 */ bool use_half_periods; uint8_t sample_delay_factor; + uint8_t wrn_dly_sel; }; /** diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-regs.h b/drivers/mtd/nand/gpmi-nand/gpmi-regs.h index 8994e201924..53397cc290f 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-regs.h +++ b/drivers/mtd/nand/gpmi-nand/gpmi-regs.h @@ -108,6 +108,15 @@ #define HW_GPMI_CTRL1_CLR 0x00000068 #define HW_GPMI_CTRL1_TOG 0x0000006c +#define BP_GPMI_CTRL1_WRN_DLY_SEL 22 +#define BM_GPMI_CTRL1_WRN_DLY_SEL (0x3 << BP_GPMI_CTRL1_WRN_DLY_SEL) +#define BF_GPMI_CTRL1_WRN_DLY_SEL(v) \ + (((v) << BP_GPMI_CTRL1_WRN_DLY_SEL) & BM_GPMI_CTRL1_WRN_DLY_SEL) +#define BV_GPMI_CTRL1_WRN_DLY_SEL_4_TO_8NS 0x0 +#define BV_GPMI_CTRL1_WRN_DLY_SEL_6_TO_10NS 0x1 +#define BV_GPMI_CTRL1_WRN_DLY_SEL_7_TO_12NS 0x2 +#define BV_GPMI_CTRL1_WRN_DLY_SEL_NO_DELAY 0x3 + #define BM_GPMI_CTRL1_BCH_MODE (1 << 18) #define BP_GPMI_CTRL1_DLL_ENABLE 17 -- cgit v1.2.3-70-g09d2