From 7926b5a325f06745a1bed75bfb4ef814d0ae9d99 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 30 Oct 2008 10:14:35 +0000 Subject: [ARM] S3C: Move nand headers to arch/arm/plat-s3c/include/plat Move nand headers to arch/arm/plat-s3c/include/plat ready to clean out the old include directories. Signed-off-by: Ben Dooks --- drivers/mtd/nand/s3c2410.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index 556139ed1fd..098f5162388 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -45,8 +45,8 @@ #include -#include -#include +#include +#include #ifdef CONFIG_MTD_NAND_S3C2410_HWECC static int hardware_ecc = 1; -- cgit v1.2.3-70-g09d2 From 59f0cb0fddc14ffc6676ae62e911f8115ebc8ccf Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 27 Oct 2008 11:24:09 +0000 Subject: [ARM] remove memzero() As suggested by Andrew Morton, remove memzero() - it's not supported on other architectures so use of it is a potential build breaking bug. Since the compiler optimizes memset(x,0,n) to __memzero() perfectly well, we don't miss out on the underlying benefits of memzero(). Signed-off-by: Russell King --- arch/arm/boot/compressed/misc.c | 2 ++ arch/arm/include/asm/page.h | 2 +- arch/arm/include/asm/processor.h | 2 +- arch/arm/include/asm/string.h | 9 --------- arch/arm/include/asm/uaccess.h | 2 +- arch/arm/lib/memset.S | 2 +- arch/arm/mm/mmu.c | 2 +- arch/arm/mm/pgd.c | 2 +- drivers/mfd/asic3.c | 6 +++--- drivers/mtd/maps/ixp2000.c | 2 +- drivers/mtd/maps/ixp4xx.c | 2 +- drivers/mtd/nand/s3c2410.c | 4 ++-- drivers/video/sa1100fb.c | 2 +- 13 files changed, 16 insertions(+), 23 deletions(-) (limited to 'drivers/mtd') diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index 65ce8fff29d..3fc08413fff 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -86,6 +86,8 @@ static void putstr(const char *ptr) #define __ptr_t void * +#define memzero(s,n) __memzero(s,n) + /* * Optimised C version of memzero for the ARM. */ diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h index bed1c0a0036..5fee45e2303 100644 --- a/arch/arm/include/asm/page.h +++ b/arch/arm/include/asm/page.h @@ -133,7 +133,7 @@ extern void __cpu_copy_user_page(void *to, const void *from, #define clear_user_page(addr,vaddr,pg) __cpu_clear_user_page(addr, vaddr) #define copy_user_page(to,from,vaddr,pg) __cpu_copy_user_page(to, from, vaddr) -#define clear_page(page) memzero((void *)(page), PAGE_SIZE) +#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE) extern void copy_page(void *to, const void *from); #undef STRICT_MM_TYPECHECKS diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index 517a4d6ffc7..2320508443a 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -64,7 +64,7 @@ struct thread_struct { ({ \ unsigned long *stack = (unsigned long *)sp; \ set_fs(USER_DS); \ - memzero(regs->uregs, sizeof(regs->uregs)); \ + memset(regs->uregs, 0, sizeof(regs->uregs)); \ if (current->personality & ADDR_LIMIT_32BIT) \ regs->ARM_cpsr = USR_MODE; \ else \ diff --git a/arch/arm/include/asm/string.h b/arch/arm/include/asm/string.h index e50c4a39b69..cf4f3aad0fc 100644 --- a/arch/arm/include/asm/string.h +++ b/arch/arm/include/asm/string.h @@ -21,7 +21,6 @@ extern void * memmove(void *, const void *, __kernel_size_t); #define __HAVE_ARCH_MEMCHR extern void * memchr(const void *, int, __kernel_size_t); -#define __HAVE_ARCH_MEMZERO #define __HAVE_ARCH_MEMSET extern void * memset(void *, int, __kernel_size_t); @@ -39,12 +38,4 @@ extern void __memzero(void *ptr, __kernel_size_t n); (__p); \ }) -#define memzero(p,n) \ - ({ \ - void *__p = (p); size_t __n = n; \ - if ((__n) != 0) \ - __memzero((__p),(__n)); \ - (__p); \ - }) - #endif diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index e98ec60b340..cbb7a37e297 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -400,7 +400,7 @@ static inline unsigned long __must_check copy_from_user(void *to, const void __u if (access_ok(VERIFY_READ, from, n)) n = __copy_from_user(to, from, n); else /* security hole - plug it */ - memzero(to, n); + memset(to, 0, n); return n; } diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S index 761eefa7624..650d5923ab8 100644 --- a/arch/arm/lib/memset.S +++ b/arch/arm/lib/memset.S @@ -25,7 +25,7 @@ add r2, r2, r3 @ 1 (r2 = r2 - (4 - r3)) /* * The pointer is now aligned and the length is adjusted. Try doing the - * memzero again. + * memset again. */ ENTRY(memset) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 7f36c825718..f24803c1fb0 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -896,7 +896,7 @@ void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc) * allocate the zero page. Note that we count on this going ok. */ zero_page = alloc_bootmem_low_pages(PAGE_SIZE); - memzero(zero_page, PAGE_SIZE); + memset(zero_page, 0, PAGE_SIZE); empty_zero_page = virt_to_page(zero_page); flush_dcache_page(empty_zero_page); } diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c index e0f19ab9116..2690146161b 100644 --- a/arch/arm/mm/pgd.c +++ b/arch/arm/mm/pgd.c @@ -31,7 +31,7 @@ pgd_t *get_pgd_slow(struct mm_struct *mm) if (!new_pgd) goto no_pgd; - memzero(new_pgd, FIRST_KERNEL_PGD_NR * sizeof(pgd_t)); + memset(new_pgd, 0, FIRST_KERNEL_PGD_NR * sizeof(pgd_t)); /* * Copy over the kernel and IO PGD entries diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c index e4c0db4dc7b..9e485459f63 100644 --- a/drivers/mfd/asic3.c +++ b/drivers/mfd/asic3.c @@ -474,9 +474,9 @@ static __init int asic3_gpio_probe(struct platform_device *pdev, u16 dir_reg[ASIC3_NUM_GPIO_BANKS]; int i; - memzero(alt_reg, ASIC3_NUM_GPIO_BANKS * sizeof(u16)); - memzero(out_reg, ASIC3_NUM_GPIO_BANKS * sizeof(u16)); - memzero(dir_reg, ASIC3_NUM_GPIO_BANKS * sizeof(u16)); + memset(alt_reg, 0, ASIC3_NUM_GPIO_BANKS * sizeof(u16)); + memset(out_reg, 0, ASIC3_NUM_GPIO_BANKS * sizeof(u16)); + memset(dir_reg, 0, ASIC3_NUM_GPIO_BANKS * sizeof(u16)); /* Enable all GPIOs */ asic3_write_register(asic, ASIC3_GPIO_OFFSET(A, MASK), 0xffff); diff --git a/drivers/mtd/maps/ixp2000.c b/drivers/mtd/maps/ixp2000.c index dcdb1f17577..3ea1de9be72 100644 --- a/drivers/mtd/maps/ixp2000.c +++ b/drivers/mtd/maps/ixp2000.c @@ -170,7 +170,7 @@ static int ixp2000_flash_probe(struct platform_device *dev) err = -ENOMEM; goto Error; } - memzero(info, sizeof(struct ixp2000_flash_info)); + memset(info, 0, sizeof(struct ixp2000_flash_info)); platform_set_drvdata(dev, info); diff --git a/drivers/mtd/maps/ixp4xx.c b/drivers/mtd/maps/ixp4xx.c index 9c7a5fbd4e5..16555cbeaea 100644 --- a/drivers/mtd/maps/ixp4xx.c +++ b/drivers/mtd/maps/ixp4xx.c @@ -201,7 +201,7 @@ static int ixp4xx_flash_probe(struct platform_device *dev) err = -ENOMEM; goto Error; } - memzero(info, sizeof(struct ixp4xx_flash_info)); + memset(info, 0, sizeof(struct ixp4xx_flash_info)); platform_set_drvdata(dev, info); diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index 556139ed1fd..bc9aa64bf18 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -818,7 +818,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev, goto exit_error; } - memzero(info, sizeof(*info)); + memset(info, 0, sizeof(*info)); platform_set_drvdata(pdev, info); spin_lock_init(&info->controller.lock); @@ -883,7 +883,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev, goto exit_error; } - memzero(info->mtds, size); + memset(info->mtds, 0, size); /* initialise all possible chips */ diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c index c052bd4c0b0..076f946fa0f 100644 --- a/drivers/video/sa1100fb.c +++ b/drivers/video/sa1100fb.c @@ -114,7 +114,7 @@ * - convert dma address types to dma_addr_t * - remove unused 'montype' stuff * - remove redundant zero inits of init_var after the initial - * memzero. + * memset. * - remove allow_modeset (acornfb idea does not belong here) * * 2001/05/28: -- cgit v1.2.3-70-g09d2 From e0d8b13ae1e3ea747620580b6f777992148de182 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 11 Nov 2008 17:52:32 +0000 Subject: [ARM] pxa: don't pass a consumer clock name for devices with unique clocks Where devices only have one consumer, passing a consumer clock ID has no real benefit. Remove it. Signed-off-by: Russell King --- arch/arm/mach-pxa/pwm.c | 2 +- arch/arm/mach-pxa/ssp.c | 2 +- drivers/i2c/busses/i2c-pxa.c | 2 +- drivers/input/keyboard/pxa27x_keypad.c | 2 +- drivers/media/video/pxa_camera.c | 2 +- drivers/mmc/host/pxamci.c | 2 +- drivers/mtd/nand/pxa3xx_nand.c | 2 +- drivers/serial/pxa.c | 2 +- drivers/usb/gadget/pxa25x_udc.c | 2 +- drivers/usb/gadget/pxa27x_udc.c | 2 +- drivers/usb/host/ohci-pxa27x.c | 2 +- drivers/video/pxafb.c | 2 +- 12 files changed, 12 insertions(+), 12 deletions(-) (limited to 'drivers/mtd') diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/mach-pxa/pwm.c index 74e2ead8cee..3ca7ffc6904 100644 --- a/arch/arm/mach-pxa/pwm.c +++ b/arch/arm/mach-pxa/pwm.c @@ -173,7 +173,7 @@ static struct pwm_device *pwm_probe(struct platform_device *pdev, return ERR_PTR(-ENOMEM); } - pwm->clk = clk_get(&pdev->dev, "PWMCLK"); + pwm->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(pwm->clk)) { ret = PTR_ERR(pwm->clk); goto err_free; diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c index 2c31ec72568..6f42004db3e 100644 --- a/arch/arm/mach-pxa/ssp.c +++ b/arch/arm/mach-pxa/ssp.c @@ -356,7 +356,7 @@ static int __devinit ssp_probe(struct platform_device *pdev, int type) } ssp->pdev = pdev; - ssp->clk = clk_get(&pdev->dev, "SSPCLK"); + ssp->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(ssp->clk)) { ret = PTR_ERR(ssp->clk); goto err_free; diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 906f9b9d715..587f5b2380d 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -1016,7 +1016,7 @@ static int i2c_pxa_probe(struct platform_device *dev) snprintf(i2c->adap.name, sizeof(i2c->adap.name), "pxa_i2c-i2c.%u", i2c->adap.nr); - i2c->clk = clk_get(&dev->dev, "I2CCLK"); + i2c->clk = clk_get(&dev->dev, NULL); if (IS_ERR(i2c->clk)) { ret = PTR_ERR(i2c->clk); goto eclk; diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c index 6d30c6d334c..0d2fc64a5e1 100644 --- a/drivers/input/keyboard/pxa27x_keypad.c +++ b/drivers/input/keyboard/pxa27x_keypad.c @@ -475,7 +475,7 @@ static int __devinit pxa27x_keypad_probe(struct platform_device *pdev) goto failed_free_mem; } - keypad->clk = clk_get(&pdev->dev, "KBDCLK"); + keypad->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(keypad->clk)) { dev_err(&pdev->dev, "failed to get keypad clock\n"); error = PTR_ERR(keypad->clk); diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index eb6be580292..6586f0b1336 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -1071,7 +1071,7 @@ static int pxa_camera_probe(struct platform_device *pdev) goto exit; } - pcdev->clk = clk_get(&pdev->dev, "CAMCLK"); + pcdev->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(pcdev->clk)) { err = PTR_ERR(pcdev->clk); goto exit_kfree; diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index ebfaa996093..a1700a80e2f 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -533,7 +533,7 @@ static int pxamci_probe(struct platform_device *pdev) host->pdata = pdev->dev.platform_data; host->clkrt = CLKRT_OFF; - host->clk = clk_get(&pdev->dev, "MMCCLK"); + host->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(host->clk)) { ret = PTR_ERR(host->clk); host->clk = NULL; diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index c0fa9c9edf0..61c922a8356 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -1079,7 +1079,7 @@ static int pxa3xx_nand_probe(struct platform_device *pdev) this = &info->nand_chip; mtd->priv = info; - info->clk = clk_get(&pdev->dev, "NANDCLK"); + info->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(info->clk)) { dev_err(&pdev->dev, "failed to get nand clock\n"); ret = PTR_ERR(info->clk); diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c index abc00be5543..8ea314bc00c 100644 --- a/drivers/serial/pxa.c +++ b/drivers/serial/pxa.c @@ -766,7 +766,7 @@ static int serial_pxa_probe(struct platform_device *dev) if (!sport) return -ENOMEM; - sport->clk = clk_get(&dev->dev, "UARTCLK"); + sport->clk = clk_get(&dev->dev, NULL); if (IS_ERR(sport->clk)) { ret = PTR_ERR(sport->clk); goto err_free; diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index da6e93c201d..a4790f3c7cd 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -2145,7 +2145,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev) if (irq < 0) return -ENODEV; - dev->clk = clk_get(&pdev->dev, "UDCCLK"); + dev->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(dev->clk)) { retval = PTR_ERR(dev->clk); goto err_clk; diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index caa37c95802..944e4ff641d 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -2226,7 +2226,7 @@ static int __init pxa_udc_probe(struct platform_device *pdev) udc->dev = &pdev->dev; udc->mach = pdev->dev.platform_data; - udc->clk = clk_get(&pdev->dev, "UDCCLK"); + udc->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(udc->clk)) { retval = PTR_ERR(udc->clk); goto err_clk; diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index e294d430733..e44dc2cbca2 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -296,7 +296,7 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device return -ENXIO; } - usb_clk = clk_get(&pdev->dev, "USBCLK"); + usb_clk = clk_get(&pdev->dev, NULL); if (IS_ERR(usb_clk)) return PTR_ERR(usb_clk); diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index cc59c52e110..0bc2c5a127b 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -1429,7 +1429,7 @@ static struct pxafb_info * __devinit pxafb_init_fbinfo(struct device *dev) memset(fbi, 0, sizeof(struct pxafb_info)); fbi->dev = dev; - fbi->clk = clk_get(dev, "LCDCLK"); + fbi->clk = clk_get(dev, NULL); if (IS_ERR(fbi->clk)) { kfree(fbi); return NULL; -- cgit v1.2.3-70-g09d2 From afb5b5c9adb66c73b83dc39319efbacb6fb26a7d Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Mon, 1 Dec 2008 11:43:08 +0800 Subject: [ARM] pxa: explicit #include in various drivers Where 'pxa_dma_desc' and 'pxa_{request,free}_dma' are referenced. Signed-off-by: Eric Miao --- drivers/mtd/nand/pxa3xx_nand.c | 2 +- drivers/net/smc911x.h | 3 +++ sound/arm/pxa2xx-pcm.h | 2 +- 3 files changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index c0fa9c9edf0..64b3be1ea0a 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -20,8 +20,8 @@ #include #include #include -#include +#include #include #include diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h index cc7d85bdfb3..870b4c33f10 100644 --- a/drivers/net/smc911x.h +++ b/drivers/net/smc911x.h @@ -200,6 +200,9 @@ static inline void SMC_outsl(struct smc911x_local *lp, int reg, #ifdef SMC_USE_PXA_DMA + +#include + /* * Define the request and free functions * These are unfortunately architecture specific as no generic allocation diff --git a/sound/arm/pxa2xx-pcm.h b/sound/arm/pxa2xx-pcm.h index 5c4a4d38a08..65f86b56ba4 100644 --- a/sound/arm/pxa2xx-pcm.h +++ b/sound/arm/pxa2xx-pcm.h @@ -9,7 +9,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include +#include struct pxa2xx_runtime_data { int dma_ch; -- cgit v1.2.3-70-g09d2 From ed45819f315b5a8844b5bfce881a18e9f3a055e7 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 12 Nov 2008 10:14:10 +0200 Subject: UBI: fix warnings when debugging is enabled The 'ubi_io_read_vid_hdr()' and 'ubi_io_read_ec_hdr()' function have the 'verbose' argument which controls whether they should print a warning if the VID/EC header was not found or was corrupted. Some callers require the headers to be OK, and pass 1. Some allow a corrupted/not present header, and pass 0. if (UBI_IO_DEBUG) verbose = 1; And UBI_IO_DEBUG is 1 if CONFIG_MTD_UBI_DEBUG_MSG_BLD is true. So in this case the warning is printed all the time. This confuses people. Thus, do not print the messages as warnings if UBI_IO_DEBUG is true, but print them as debugging messages instead. Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/io.c | 26 ++++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c index 2fb64be44f1..f60f700256f 100644 --- a/drivers/mtd/ubi/io.c +++ b/drivers/mtd/ubi/io.c @@ -637,8 +637,6 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum, dbg_io("read EC header from PEB %d", pnum); ubi_assert(pnum >= 0 && pnum < ubi->peb_count); - if (UBI_IO_DEBUG) - verbose = 1; err = ubi_io_read(ubi, ec_hdr, pnum, 0, UBI_EC_HDR_SIZE); if (err) { @@ -685,6 +683,9 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum, if (verbose) ubi_warn("no EC header found at PEB %d, " "only 0xFF bytes", pnum); + else if (UBI_IO_DEBUG) + dbg_msg("no EC header found at PEB %d, " + "only 0xFF bytes", pnum); return UBI_IO_PEB_EMPTY; } @@ -696,7 +697,9 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum, ubi_warn("bad magic number at PEB %d: %08x instead of " "%08x", pnum, magic, UBI_EC_HDR_MAGIC); ubi_dbg_dump_ec_hdr(ec_hdr); - } + } else if (UBI_IO_DEBUG) + dbg_msg("bad magic number at PEB %d: %08x instead of " + "%08x", pnum, magic, UBI_EC_HDR_MAGIC); return UBI_IO_BAD_EC_HDR; } @@ -708,7 +711,9 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum, ubi_warn("bad EC header CRC at PEB %d, calculated " "%#08x, read %#08x", pnum, crc, hdr_crc); ubi_dbg_dump_ec_hdr(ec_hdr); - } + } else if (UBI_IO_DEBUG) + dbg_msg("bad EC header CRC at PEB %d, calculated " + "%#08x, read %#08x", pnum, crc, hdr_crc); return UBI_IO_BAD_EC_HDR; } @@ -912,8 +917,6 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum, dbg_io("read VID header from PEB %d", pnum); ubi_assert(pnum >= 0 && pnum < ubi->peb_count); - if (UBI_IO_DEBUG) - verbose = 1; p = (char *)vid_hdr - ubi->vid_hdr_shift; err = ubi_io_read(ubi, p, pnum, ubi->vid_hdr_aloffset, @@ -960,6 +963,9 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum, if (verbose) ubi_warn("no VID header found at PEB %d, " "only 0xFF bytes", pnum); + else if (UBI_IO_DEBUG) + dbg_msg("no VID header found at PEB %d, " + "only 0xFF bytes", pnum); return UBI_IO_PEB_FREE; } @@ -971,7 +977,9 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum, ubi_warn("bad magic number at PEB %d: %08x instead of " "%08x", pnum, magic, UBI_VID_HDR_MAGIC); ubi_dbg_dump_vid_hdr(vid_hdr); - } + } else if (UBI_IO_DEBUG) + dbg_msg("bad magic number at PEB %d: %08x instead of " + "%08x", pnum, magic, UBI_VID_HDR_MAGIC); return UBI_IO_BAD_VID_HDR; } @@ -983,7 +991,9 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum, ubi_warn("bad CRC at PEB %d, calculated %#08x, " "read %#08x", pnum, crc, hdr_crc); ubi_dbg_dump_vid_hdr(vid_hdr); - } + } else if (UBI_IO_DEBUG) + dbg_msg("bad CRC at PEB %d, calculated %#08x, " + "read %#08x", pnum, crc, hdr_crc); return UBI_IO_BAD_VID_HDR; } -- cgit v1.2.3-70-g09d2 From 4df581f3dc6a91a63b9965ac8bdb47d8db294e37 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Thu, 4 Dec 2008 20:52:44 +0200 Subject: UBI: fix deadlock We cannot call 'ubi_wl_get_peb()' with @ubi->buf_mutex locked, because 'ubi_wl_get_peb()' may force erasure, which, in turn, may call 'torture_peb()' which also locks the @ubi->buf_mutex and deadlocks. Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/eba.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c index d8966bae0e0..2e4d6bf9458 100644 --- a/drivers/mtd/ubi/eba.c +++ b/drivers/mtd/ubi/eba.c @@ -504,12 +504,9 @@ static int recover_peb(struct ubi_device *ubi, int pnum, int vol_id, int lnum, if (!vid_hdr) return -ENOMEM; - mutex_lock(&ubi->buf_mutex); - retry: new_pnum = ubi_wl_get_peb(ubi, UBI_UNKNOWN); if (new_pnum < 0) { - mutex_unlock(&ubi->buf_mutex); ubi_free_vid_hdr(ubi, vid_hdr); return new_pnum; } @@ -529,20 +526,23 @@ retry: goto write_error; data_size = offset + len; + mutex_lock(&ubi->buf_mutex); memset(ubi->peb_buf1 + offset, 0xFF, len); /* Read everything before the area where the write failure happened */ if (offset > 0) { err = ubi_io_read_data(ubi, ubi->peb_buf1, pnum, 0, offset); if (err && err != UBI_IO_BITFLIPS) - goto out_put; + goto out_unlock; } memcpy(ubi->peb_buf1 + offset, buf, len); err = ubi_io_write_data(ubi, ubi->peb_buf1, new_pnum, 0, data_size); - if (err) + if (err) { + mutex_unlock(&ubi->buf_mutex); goto write_error; + } mutex_unlock(&ubi->buf_mutex); ubi_free_vid_hdr(ubi, vid_hdr); @@ -553,8 +553,9 @@ retry: ubi_msg("data was successfully recovered"); return 0; -out_put: +out_unlock: mutex_unlock(&ubi->buf_mutex); +out_put: ubi_wl_put_peb(ubi, new_pnum, 1); ubi_free_vid_hdr(ubi, vid_hdr); return err; @@ -567,7 +568,6 @@ write_error: ubi_warn("failed to write to PEB %d", new_pnum); ubi_wl_put_peb(ubi, new_pnum, 1); if (++tries > UBI_IO_RETRIES) { - mutex_unlock(&ubi->buf_mutex); ubi_free_vid_hdr(ubi, vid_hdr); return err; } -- cgit v1.2.3-70-g09d2 From 6a8f483f33a150a0269ad4612621eb6c245eb2cf Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Fri, 5 Dec 2008 12:23:48 +0200 Subject: UBI: some code re-structuring Minor code re-structuring and commentaries fixes to improve readability. Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/wl.c | 39 +++++++++++++++++++++++---------------- 1 file changed, 23 insertions(+), 16 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index dcb6dac1dc5..667f5f451c2 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -359,19 +359,18 @@ static int in_wl_tree(struct ubi_wl_entry *e, struct rb_root *root) * @ubi: UBI device description object * @e: the physical eraseblock to add * @pe: protection entry object to use - * @abs_ec: absolute erase counter value when this physical eraseblock has - * to be removed from the protection trees. + * @ec: for how many erase operations this PEB should be protected * * @wl->lock has to be locked. */ static void prot_tree_add(struct ubi_device *ubi, struct ubi_wl_entry *e, - struct ubi_wl_prot_entry *pe, int abs_ec) + struct ubi_wl_prot_entry *pe, int ec) { struct rb_node **p, *parent = NULL; struct ubi_wl_prot_entry *pe1; pe->e = e; - pe->abs_ec = ubi->abs_ec + abs_ec; + pe->abs_ec = ubi->abs_ec + ec; p = &ubi->prot.pnum.rb_node; while (*p) { @@ -739,7 +738,7 @@ static int schedule_erase(struct ubi_device *ubi, struct ubi_wl_entry *e, static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk, int cancel) { - int err, put = 0, scrubbing = 0, protect = 0; + int err, put = 0, scrubbing = 0; struct ubi_wl_prot_entry *uninitialized_var(pe); struct ubi_wl_entry *e1, *e2; struct ubi_vid_hdr *vid_hdr; @@ -864,17 +863,28 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk, goto out_error; } - protect = 1; + ubi_free_vid_hdr(ubi, vid_hdr); + spin_lock(&ubi->wl_lock); + prot_tree_add(ubi, e1, pe, U_PROTECTION); + ubi_assert(!ubi->move_to_put); + ubi->move_from = ubi->move_to = NULL; + ubi->wl_scheduled = 0; + spin_unlock(&ubi->wl_lock); + + err = schedule_erase(ubi, e2, 0); + if (err) + goto out_error; + mutex_unlock(&ubi->move_mutex); + return 0; } + /* The PEB has been successfully moved */ ubi_free_vid_hdr(ubi, vid_hdr); - if (scrubbing && !protect) + if (scrubbing) ubi_msg("scrubbed PEB %d, data moved to PEB %d", e1->pnum, e2->pnum); spin_lock(&ubi->wl_lock); - if (protect) - prot_tree_add(ubi, e1, pe, protect); if (!ubi->move_to_put) wl_tree_add(e2, &ubi->used); else @@ -883,6 +893,10 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk, ubi->move_to_put = ubi->wl_scheduled = 0; spin_unlock(&ubi->wl_lock); + err = schedule_erase(ubi, e1, 0); + if (err) + goto out_error; + if (put) { /* * Well, the target PEB was put meanwhile, schedule it for @@ -894,13 +908,6 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk, goto out_error; } - if (!protect) { - err = schedule_erase(ubi, e1, 0); - if (err) - goto out_error; - } - - dbg_wl("done"); mutex_unlock(&ubi->move_mutex); return 0; -- cgit v1.2.3-70-g09d2 From 3c98b0a043f25fa44b289c2f35b9d6ad1d859ac9 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Fri, 5 Dec 2008 12:42:45 +0200 Subject: UBI: fix error path Make sure the resources had not already been freed before freeing them in the error path of the WL worker function. Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/wl.c | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index 667f5f451c2..442099d76ec 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -738,13 +738,12 @@ static int schedule_erase(struct ubi_device *ubi, struct ubi_wl_entry *e, static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk, int cancel) { - int err, put = 0, scrubbing = 0; + int err, scrubbing = 0; struct ubi_wl_prot_entry *uninitialized_var(pe); struct ubi_wl_entry *e1, *e2; struct ubi_vid_hdr *vid_hdr; kfree(wrk); - if (cancel) return 0; @@ -864,6 +863,8 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk, } ubi_free_vid_hdr(ubi, vid_hdr); + vid_hdr = NULL; + spin_lock(&ubi->wl_lock); prot_tree_add(ubi, e1, pe, U_PROTECTION); ubi_assert(!ubi->move_to_put); @@ -871,6 +872,7 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk, ubi->wl_scheduled = 0; spin_unlock(&ubi->wl_lock); + e1 = NULL; err = schedule_erase(ubi, e2, 0); if (err) goto out_error; @@ -880,24 +882,27 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk, /* The PEB has been successfully moved */ ubi_free_vid_hdr(ubi, vid_hdr); + vid_hdr = NULL; if (scrubbing) ubi_msg("scrubbed PEB %d, data moved to PEB %d", e1->pnum, e2->pnum); spin_lock(&ubi->wl_lock); - if (!ubi->move_to_put) + if (!ubi->move_to_put) { wl_tree_add(e2, &ubi->used); - else - put = 1; + e2 = NULL; + } ubi->move_from = ubi->move_to = NULL; ubi->move_to_put = ubi->wl_scheduled = 0; spin_unlock(&ubi->wl_lock); err = schedule_erase(ubi, e1, 0); - if (err) + if (err) { + e1 = NULL; goto out_error; + } - if (put) { + if (e2) { /* * Well, the target PEB was put meanwhile, schedule it for * erasure. @@ -919,6 +924,7 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk, */ out_not_moved: ubi_free_vid_hdr(ubi, vid_hdr); + vid_hdr = NULL; spin_lock(&ubi->wl_lock); if (scrubbing) wl_tree_add(e1, &ubi->scrub); @@ -928,6 +934,7 @@ out_not_moved: ubi->move_to_put = ubi->wl_scheduled = 0; spin_unlock(&ubi->wl_lock); + e1 = NULL; err = schedule_erase(ubi, e2, 0); if (err) goto out_error; @@ -945,8 +952,10 @@ out_error: ubi->move_to_put = ubi->wl_scheduled = 0; spin_unlock(&ubi->wl_lock); - kmem_cache_free(ubi_wl_entry_slab, e1); - kmem_cache_free(ubi_wl_entry_slab, e2); + if (e1) + kmem_cache_free(ubi_wl_entry_slab, e1); + if (e2) + kmem_cache_free(ubi_wl_entry_slab, e2); ubi_ro_mode(ubi); mutex_unlock(&ubi->move_mutex); -- cgit v1.2.3-70-g09d2 From 6fa6f5bbc3a2ad833a3d4b798140602004f70f5a Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Fri, 5 Dec 2008 13:37:02 +0200 Subject: UBI: handle write errors in WL worker When a PEB is moved and a write error happens, UBI switches to R/O mode, which is wrong, because we just copy the data and may select a different PEB and re-try this. This patch fixes WL worker's behavior. Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/eba.c | 37 ++++++++++++++++++++++++------------- drivers/mtd/ubi/wl.c | 32 ++++++++++++++++++++------------ 2 files changed, 44 insertions(+), 25 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c index 2e4d6bf9458..048a606cebd 100644 --- a/drivers/mtd/ubi/eba.c +++ b/drivers/mtd/ubi/eba.c @@ -949,10 +949,14 @@ write_error: * This function copies logical eraseblock from physical eraseblock @from to * physical eraseblock @to. The @vid_hdr buffer may be changed by this * function. Returns: - * o %0 in case of success; - * o %1 if the operation was canceled and should be tried later (e.g., - * because a bit-flip was detected at the target PEB); - * o %2 if the volume is being deleted and this LEB should not be moved. + * o %0 in case of success; + * o %1 if the operation was canceled because the volume is being deleted + * or because the PEB was put meanwhile; + * o %2 if the operation was canceled because there was a write error to the + * target PEB; + * o %-EAGAIN if the operation was canceled because a bit-flip was detected + * in the target PEB; + * o a negative error code in case of failure. */ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to, struct ubi_vid_hdr *vid_hdr) @@ -978,7 +982,7 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to, /* * Note, we may race with volume deletion, which means that the volume * this logical eraseblock belongs to might be being deleted. Since the - * volume deletion unmaps all the volume's logical eraseblocks, it will + * volume deletion un-maps all the volume's logical eraseblocks, it will * be locked in 'ubi_wl_put_peb()' and wait for the WL worker to finish. */ vol = ubi->volumes[idx]; @@ -986,7 +990,7 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to, /* No need to do further work, cancel */ dbg_eba("volume %d is being removed, cancel", vol_id); spin_unlock(&ubi->volumes_lock); - return 2; + return 1; } spin_unlock(&ubi->volumes_lock); @@ -1023,7 +1027,7 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to, /* * OK, now the LEB is locked and we can safely start moving it. Since - * this function utilizes thie @ubi->peb1_buf buffer which is shared + * this function utilizes the @ubi->peb1_buf buffer which is shared * with some other functions, so lock the buffer by taking the * @ubi->buf_mutex. */ @@ -1068,8 +1072,11 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to, vid_hdr->sqnum = cpu_to_be64(next_sqnum(ubi)); err = ubi_io_write_vid_hdr(ubi, to, vid_hdr); - if (err) + if (err) { + if (err == -EIO) + err = 2; goto out_unlock_buf; + } cond_resched(); @@ -1079,14 +1086,17 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to, if (err != UBI_IO_BITFLIPS) ubi_warn("cannot read VID header back from PEB %d", to); else - err = 1; + err = -EAGAIN; goto out_unlock_buf; } if (data_size > 0) { err = ubi_io_write_data(ubi, ubi->peb_buf1, to, 0, aldata_size); - if (err) + if (err) { + if (err == -EIO) + err = 2; goto out_unlock_buf; + } cond_resched(); @@ -1101,15 +1111,16 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to, ubi_warn("cannot read data back from PEB %d", to); else - err = 1; + err = -EAGAIN; goto out_unlock_buf; } cond_resched(); if (memcmp(ubi->peb_buf1, ubi->peb_buf2, aldata_size)) { - ubi_warn("read data back from PEB %d - it is different", - to); + ubi_warn("read data back from PEB %d and it is " + "different", to); + err = -EINVAL; goto out_unlock_buf; } } diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index 442099d76ec..abf65ea414e 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -738,7 +738,7 @@ static int schedule_erase(struct ubi_device *ubi, struct ubi_wl_entry *e, static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk, int cancel) { - int err, scrubbing = 0; + int err, scrubbing = 0, torture = 0; struct ubi_wl_prot_entry *uninitialized_var(pe); struct ubi_wl_entry *e1, *e2; struct ubi_vid_hdr *vid_hdr; @@ -842,20 +842,26 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk, err = ubi_eba_copy_leb(ubi, e1->pnum, e2->pnum, vid_hdr); if (err) { - + if (err == -EAGAIN) + goto out_not_moved; if (err < 0) goto out_error; - if (err == 1) + if (err == 2) { + /* Target PEB write error, torture it */ + torture = 1; goto out_not_moved; + } /* - * For some reason the LEB was not moved - it might be because - * the volume is being deleted. We should prevent this PEB from - * being selected for wear-levelling movement for some "time", - * so put it to the protection tree. + * The LEB has not been moved because the volume is being + * deleted or the PEB has been put meanwhile. We should prevent + * this PEB from being selected for wear-leveling movement + * again, so put it to the protection tree. */ - dbg_wl("cancelled moving PEB %d", e1->pnum); + dbg_wl("canceled moving PEB %d", e1->pnum); + ubi_assert(err == 1); + pe = kmalloc(sizeof(struct ubi_wl_prot_entry), GFP_NOFS); if (!pe) { err = -ENOMEM; @@ -920,9 +926,10 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk, /* * For some reasons the LEB was not moved, might be an error, might be * something else. @e1 was not changed, so return it back. @e2 might - * be changed, schedule it for erasure. + * have been changed, schedule it for erasure. */ out_not_moved: + dbg_wl("canceled moving PEB %d", e1->pnum); ubi_free_vid_hdr(ubi, vid_hdr); vid_hdr = NULL; spin_lock(&ubi->wl_lock); @@ -930,12 +937,13 @@ out_not_moved: wl_tree_add(e1, &ubi->scrub); else wl_tree_add(e1, &ubi->used); + ubi_assert(!ubi->move_to_put); ubi->move_from = ubi->move_to = NULL; - ubi->move_to_put = ubi->wl_scheduled = 0; + ubi->wl_scheduled = 0; spin_unlock(&ubi->wl_lock); e1 = NULL; - err = schedule_erase(ubi, e2, 0); + err = schedule_erase(ubi, e2, torture); if (err) goto out_error; @@ -1324,7 +1332,7 @@ int ubi_wl_flush(struct ubi_device *ubi) up_write(&ubi->work_sem); /* - * And in case last was the WL worker and it cancelled the LEB + * And in case last was the WL worker and it canceled the LEB * movement, flush again. */ while (ubi->works_count) { -- cgit v1.2.3-70-g09d2 From ad5942bad6addcf9697a74413b517d9724d803a4 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 10 Dec 2008 10:42:54 +0100 Subject: UBI: return -ENOMEM upon failing vmalloc Return with correct error code (-ENOMEM) from ubi_attach_mtd_dev() upon failing vmalloc(). Signed-off-by: Stefan Roese Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/build.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index c7630a22831..ba0bd3d5775 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -815,19 +815,20 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset) if (err) goto out_free; + err = -ENOMEM; ubi->peb_buf1 = vmalloc(ubi->peb_size); if (!ubi->peb_buf1) goto out_free; ubi->peb_buf2 = vmalloc(ubi->peb_size); if (!ubi->peb_buf2) - goto out_free; + goto out_free; #ifdef CONFIG_MTD_UBI_DEBUG mutex_init(&ubi->dbg_buf_mutex); ubi->dbg_peb_buf = vmalloc(ubi->peb_size); if (!ubi->dbg_peb_buf) - goto out_free; + goto out_free; #endif err = attach_by_scanning(ubi); -- cgit v1.2.3-70-g09d2 From 0b84b5ca43a9c86cfad848c135fdbf7c72af68fa Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 10 Dec 2008 17:35:25 -0800 Subject: ARM: OMAP: switch to standard gpio get/set calls This patch replaces some legacy OMAP GPIO calls with the "new" (not really, any more!) calls that work on most platforms. The calls addressed by this patch are the simple ones to get and set values ... for code that's in mainline, including the implementations of those calls. Except for the declarations and definitions of those calls, all of these changes were performed by a simple SED script. Plus, a few "if() set() else set()" branches were merged by hand. Signed-off-by: David Brownell Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-fsample.c | 2 +- arch/arm/mach-omap1/board-h2.c | 9 +++------ arch/arm/mach-omap1/board-h3.c | 2 +- arch/arm/mach-omap1/board-nokia770.c | 10 +++++----- arch/arm/mach-omap1/board-palmte.c | 6 +++--- arch/arm/mach-omap1/board-palmtt.c | 2 +- arch/arm/mach-omap1/board-palmz71.c | 6 +++--- arch/arm/mach-omap1/board-perseus2.c | 2 +- arch/arm/mach-omap1/board-sx1.c | 6 +++--- arch/arm/mach-omap1/board-voiceblue.c | 20 ++++++++++---------- arch/arm/mach-omap1/leds-h2p2-debug.c | 10 +++++----- arch/arm/mach-omap1/leds-osk.c | 4 ++-- arch/arm/mach-omap2/board-apollon.c | 2 +- arch/arm/plat-omap/debug-leds.c | 10 +++++----- arch/arm/plat-omap/gpio.c | 21 +++------------------ arch/arm/plat-omap/include/mach/gpio.h | 2 -- drivers/mtd/onenand/omap2.c | 2 +- 17 files changed, 48 insertions(+), 68 deletions(-) (limited to 'drivers/mtd') diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index db789461fca..68da3131f8f 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -205,7 +205,7 @@ static struct platform_device *devices[] __initdata = { static int nand_dev_ready(struct omap_nand_platform_data *data) { - return omap_get_gpio_datain(P2_NAND_RB_GPIO_PIN); + return gpio_get_value(P2_NAND_RB_GPIO_PIN); } static struct omap_uart_config fsample_uart_config __initdata = { diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 3b65914b914..a2914ac4a20 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -250,11 +250,8 @@ static struct platform_device h2_kp_device = { #if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE) static int h2_transceiver_mode(struct device *dev, int state) { - if (state & IR_SIRMODE) - omap_set_gpio_dataout(H2_IRDA_FIRSEL_GPIO_PIN, 0); - else /* MIR/FIR */ - omap_set_gpio_dataout(H2_IRDA_FIRSEL_GPIO_PIN, 1); - + /* SIR when low, else MIR/FIR when HIGH */ + gpio_set_value(H2_IRDA_FIRSEL_GPIO_PIN, !(state & IR_SIRMODE)); return 0; } #endif @@ -409,7 +406,7 @@ static struct omap_board_config_kernel h2_config[] __initdata = { static int h2_nand_dev_ready(struct omap_nand_platform_data *data) { - return omap_get_gpio_datain(H2_NAND_RB_GPIO_PIN); + return gpio_get_value(H2_NAND_RB_GPIO_PIN); } static void __init h2_init(void) diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index adfcd7b5139..c524f47cf86 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -498,7 +498,7 @@ static struct omap_gpio_switch h3_gpio_switches[] __initdata = { static int nand_dev_ready(struct omap_nand_platform_data *data) { - return omap_get_gpio_datain(H3_NAND_RB_GPIO_PIN); + return gpio_get_value(H3_NAND_RB_GPIO_PIN); } static void __init h3_init(void) diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 38d9783ac6d..e0576f5bcda 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -102,7 +102,7 @@ static void mipid_shutdown(struct mipid_platform_data *pdata) { if (pdata->nreset_gpio != -1) { printk(KERN_INFO "shutdown LCD\n"); - omap_set_gpio_dataout(pdata->nreset_gpio, 0); + gpio_set_value(pdata->nreset_gpio, 0); msleep(120); } } @@ -130,7 +130,7 @@ static void ads7846_dev_init(void) static int ads7846_get_pendown_state(void) { - return !omap_get_gpio_datain(ADS7846_PENDOWN_GPIO); + return !gpio_get_value(ADS7846_PENDOWN_GPIO); } static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata = { @@ -228,9 +228,9 @@ static void nokia770_audio_pwr_up(void) /* Turn on codec */ aic23_power_up(); - if (omap_get_gpio_datain(HEADPHONE_GPIO)) + if (gpio_get_value(HEADPHONE_GPIO)) /* HP not connected, turn on amplifier */ - omap_set_gpio_dataout(AMPLIFIER_CTRL_GPIO, 1); + gpio_set_value(AMPLIFIER_CTRL_GPIO, 1); else /* HP connected, do not turn on amplifier */ printk("HP connected\n"); @@ -250,7 +250,7 @@ static DECLARE_DELAYED_WORK(codec_power_down_work, codec_delayed_power_down); static void nokia770_audio_pwr_down(void) { /* Turn off amplifier */ - omap_set_gpio_dataout(AMPLIFIER_CTRL_GPIO, 0); + gpio_set_value(AMPLIFIER_CTRL_GPIO, 0); /* Turn off codec: schedule delayed work */ schedule_delayed_work(&codec_power_down_work, HZ / 20); /* 50ms */ diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index b58043644a6..df663ba7ea8 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -255,7 +255,7 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery) { int charging, batt, hi, lo, mid; - charging = !omap_get_gpio_datain(PALMTE_DC_GPIO); + charging = !gpio_get_value(PALMTE_DC_GPIO); batt = battery[0]; if (charging) batt -= 60; @@ -335,11 +335,11 @@ static void palmte_headphones_detect(void *data, int state) { if (state) { /* Headphones connected, disable speaker */ - omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 0); + gpio_set_value(PALMTE_SPEAKER_GPIO, 0); printk(KERN_INFO "PM: speaker off\n"); } else { /* Headphones unplugged, re-enable speaker */ - omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 1); + gpio_set_value(PALMTE_SPEAKER_GPIO, 1); printk(KERN_INFO "PM: speaker on\n"); } } diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 40f9860a09d..5c001afe806 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -268,7 +268,7 @@ static struct platform_device *palmtt_devices[] __initdata = { static int palmtt_get_pendown_state(void) { - return !omap_get_gpio_datain(6); + return !gpio_get_value(6); } static const struct ads7846_platform_data palmtt_ts_info = { diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index e719294250b..c33766c4dd9 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -239,7 +239,7 @@ static struct platform_device *devices[] __initdata = { static int palmz71_get_pendown_state(void) { - return !omap_get_gpio_datain(PALMZ71_PENIRQ_GPIO); + return !gpio_get_value(PALMZ71_PENIRQ_GPIO); } static const struct ads7846_platform_data palmz71_ts_info = { @@ -295,7 +295,7 @@ static struct omap_board_config_kernel palmz71_config[] __initdata = { static irqreturn_t palmz71_powercable(int irq, void *dev_id) { - if (omap_get_gpio_datain(PALMZ71_USBDETECT_GPIO)) { + if (gpio_get_value(PALMZ71_USBDETECT_GPIO)) { printk(KERN_INFO "PM: Power cable connected\n"); set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), IRQ_TYPE_EDGE_FALLING); @@ -323,7 +323,7 @@ palmz71_gpio_setup(int early) { if (early) { /* Only set GPIO1 so we have a working serial */ - omap_set_gpio_dataout(1, 1); + gpio_set_value(1, 1); omap_set_gpio_direction(1, 0); } else { /* Set MMC/SD host WP pin as input */ diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index b715917bfda..b8f0077f9c7 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -205,7 +205,7 @@ static struct platform_device *devices[] __initdata = { static int nand_dev_ready(struct omap_nand_platform_data *data) { - return omap_get_gpio_datain(P2_NAND_RB_GPIO_PIN); + return gpio_get_value(P2_NAND_RB_GPIO_PIN); } static struct omap_uart_config perseus2_uart_config __initdata = { diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 130bcc6fd08..22305270381 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -440,9 +440,9 @@ static void __init omap_sx1_init(void) omap_set_gpio_direction(11, 0);/* gpio11 -> output */ omap_set_gpio_direction(15, 0);/* gpio15 -> output */ /* set GPIO data */ - omap_set_gpio_dataout(1, 1);/*A_IRDA_OFF = 1 */ - omap_set_gpio_dataout(11, 0);/*A_SWITCH = 0 */ - omap_set_gpio_dataout(15, 0);/*A_USB_ON = 0 */ + gpio_set_value(1, 1);/*A_IRDA_OFF = 1 */ + gpio_set_value(11, 0);/*A_SWITCH = 0 */ + gpio_set_value(15, 0);/*A_USB_ON = 0 */ } /*----------------------------------------*/ diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 45a01311669..d7ab11acc7e 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -172,16 +172,16 @@ static void __init voiceblue_init(void) /* smc91x reset */ omap_request_gpio(7); omap_set_gpio_direction(7, 0); - omap_set_gpio_dataout(7, 1); + gpio_set_value(7, 1); udelay(2); /* wait at least 100ns */ - omap_set_gpio_dataout(7, 0); + gpio_set_value(7, 0); mdelay(50); /* 50ms until PHY ready */ /* smc91x interrupt pin */ omap_request_gpio(8); /* 16C554 reset*/ omap_request_gpio(6); omap_set_gpio_direction(6, 0); - omap_set_gpio_dataout(6, 0); + gpio_set_value(6, 0); /* 16C554 interrupt pins */ omap_request_gpio(12); omap_request_gpio(13); @@ -245,17 +245,17 @@ static int wdt_gpio_state; void voiceblue_wdt_enable(void) { omap_set_gpio_direction(0, 0); - omap_set_gpio_dataout(0, 0); - omap_set_gpio_dataout(0, 1); - omap_set_gpio_dataout(0, 0); + gpio_set_value(0, 0); + gpio_set_value(0, 1); + gpio_set_value(0, 0); wdt_gpio_state = 0; } void voiceblue_wdt_disable(void) { - omap_set_gpio_dataout(0, 0); - omap_set_gpio_dataout(0, 1); - omap_set_gpio_dataout(0, 0); + gpio_set_value(0, 0); + gpio_set_value(0, 1); + gpio_set_value(0, 0); omap_set_gpio_direction(0, 1); } @@ -265,7 +265,7 @@ void voiceblue_wdt_ping(void) return; wdt_gpio_state = !wdt_gpio_state; - omap_set_gpio_dataout(0, wdt_gpio_state); + gpio_set_value(0, wdt_gpio_state); } void voiceblue_reset(void) diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c index 71fe2cc7f7c..17c9d0e0421 100644 --- a/arch/arm/mach-omap1/leds-h2p2-debug.c +++ b/arch/arm/mach-omap1/leds-h2p2-debug.c @@ -65,8 +65,8 @@ void h2p2_dbg_leds_event(led_event_t evt) /* all leds off during suspend or shutdown */ if (! machine_is_omap_perseus2()) { - omap_set_gpio_dataout(GPIO_TIMER, 0); - omap_set_gpio_dataout(GPIO_IDLE, 0); + gpio_set_value(GPIO_TIMER, 0); + gpio_set_value(GPIO_IDLE, 0); } __raw_writew(~0, &fpga->leds); @@ -94,7 +94,7 @@ void h2p2_dbg_leds_event(led_event_t evt) if (machine_is_omap_perseus2()) hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER; else { - omap_set_gpio_dataout(GPIO_TIMER, led_state & LED_TIMER_ON); + gpio_set_value(GPIO_TIMER, led_state & LED_TIMER_ON); goto done; } @@ -106,7 +106,7 @@ void h2p2_dbg_leds_event(led_event_t evt) if (machine_is_omap_perseus2()) hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE; else { - omap_set_gpio_dataout(GPIO_IDLE, 1); + gpio_set_value(GPIO_IDLE, 1); goto done; } @@ -116,7 +116,7 @@ void h2p2_dbg_leds_event(led_event_t evt) if (machine_is_omap_perseus2()) hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE; else { - omap_set_gpio_dataout(GPIO_IDLE, 0); + gpio_set_value(GPIO_IDLE, 0); goto done; } diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c index 98e789622df..499d7ad8697 100644 --- a/arch/arm/mach-omap1/leds-osk.c +++ b/arch/arm/mach-omap1/leds-osk.c @@ -44,8 +44,8 @@ static void mistral_setled(void) green = 1; /* else both sides are disabled */ - omap_set_gpio_dataout(GPIO_LED_GREEN, green); - omap_set_gpio_dataout(GPIO_LED_RED, red); + gpio_set_value(GPIO_LED_GREEN, green); + gpio_set_value(GPIO_LED_RED, red); } #endif diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 989ad152d7f..a4ba52c8119 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -361,7 +361,7 @@ static void __init apollon_usb_init(void) omap_cfg_reg(P21_242X_GPIO12); omap_request_gpio(12); omap_set_gpio_direction(12, 0); /* OUT */ - omap_set_gpio_dataout(12, 0); + gpio_set_value(12, 0); } static void __init omap_apollon_init(void) diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c index 2f4c0cabfd3..be4eefda476 100644 --- a/arch/arm/plat-omap/debug-leds.c +++ b/arch/arm/plat-omap/debug-leds.c @@ -83,8 +83,8 @@ static void h2p2_dbg_leds_event(led_event_t evt) /* all leds off during suspend or shutdown */ if (!(machine_is_omap_perseus2() || machine_is_omap_h4())) { - omap_set_gpio_dataout(GPIO_TIMER, 0); - omap_set_gpio_dataout(GPIO_IDLE, 0); + gpio_set_value(GPIO_TIMER, 0); + gpio_set_value(GPIO_IDLE, 0); } __raw_writew(~0, &fpga->leds); @@ -107,7 +107,7 @@ static void h2p2_dbg_leds_event(led_event_t evt) if (machine_is_omap_perseus2() || machine_is_omap_h4()) hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER; else { - omap_set_gpio_dataout(GPIO_TIMER, + gpio_set_value(GPIO_TIMER, led_state & LED_TIMER_ON); goto done; } @@ -121,7 +121,7 @@ static void h2p2_dbg_leds_event(led_event_t evt) if (machine_is_omap_perseus2() || machine_is_omap_h4()) hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE; else { - omap_set_gpio_dataout(GPIO_IDLE, 1); + gpio_set_value(GPIO_IDLE, 1); goto done; } @@ -131,7 +131,7 @@ static void h2p2_dbg_leds_event(led_event_t evt) if (machine_is_omap_perseus2() || machine_is_omap_h4()) hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE; else { - omap_set_gpio_dataout(GPIO_IDLE, 0); + gpio_set_value(GPIO_IDLE, 0); goto done; } diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index e07ab233e78..c0322b56efe 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -407,20 +407,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) __raw_writel(l, reg); } -void omap_set_gpio_dataout(int gpio, int enable) -{ - struct gpio_bank *bank; - unsigned long flags; - - if (check_gpio(gpio) < 0) - return; - bank = get_gpio_bank(gpio); - spin_lock_irqsave(&bank->lock, flags); - _set_gpio_dataout(bank, get_gpio_index(gpio), enable); - spin_unlock_irqrestore(&bank->lock, flags); -} - -int omap_get_gpio_datain(int gpio) +static int __omap_get_gpio_datain(int gpio) { struct gpio_bank *bank; void __iomem *reg; @@ -1258,7 +1245,7 @@ static int gpio_input(struct gpio_chip *chip, unsigned offset) static int gpio_get(struct gpio_chip *chip, unsigned offset) { - return omap_get_gpio_datain(chip->base + offset); + return __omap_get_gpio_datain(chip->base + offset); } static int gpio_output(struct gpio_chip *chip, unsigned offset, int value) @@ -1755,8 +1742,6 @@ static int __init omap_gpio_sysinit(void) EXPORT_SYMBOL(omap_request_gpio); EXPORT_SYMBOL(omap_free_gpio); EXPORT_SYMBOL(omap_set_gpio_direction); -EXPORT_SYMBOL(omap_set_gpio_dataout); -EXPORT_SYMBOL(omap_get_gpio_datain); arch_initcall(omap_gpio_sysinit); @@ -1814,7 +1799,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused) continue; irq = bank->virtual_irq_start + j; - value = omap_get_gpio_datain(gpio); + value = gpio_get_value(gpio); is_in = gpio_is_input(bank, mask); if (bank_is_mpuio(bank)) diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h index 5f996f350c8..d91ba328a30 100644 --- a/arch/arm/plat-omap/include/mach/gpio.h +++ b/arch/arm/plat-omap/include/mach/gpio.h @@ -74,8 +74,6 @@ extern int omap_gpio_init(void); /* Call from board init only */ extern int omap_request_gpio(int gpio); extern void omap_free_gpio(int gpio); extern void omap_set_gpio_direction(int gpio, int is_input); -extern void omap_set_gpio_dataout(int gpio, int enable); -extern int omap_get_gpio_datain(int gpio); extern void omap2_gpio_prepare_for_retention(void); extern void omap2_gpio_resume_after_retention(void); extern void omap_set_gpio_debounce(int gpio, int enable); diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index a7e4d985f5e..cf1501d26a3 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -149,7 +149,7 @@ static int omap2_onenand_wait(struct mtd_info *mtd, int state) INIT_COMPLETION(c->irq_done); if (c->gpio_irq) { - result = omap_get_gpio_datain(c->gpio_irq); + result = gpio_get_value(c->gpio_irq); if (result == -1) { ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS); intr = read_reg(c, ONENAND_REG_INTERRUPT); -- cgit v1.2.3-70-g09d2 From 40e3925ba15b604c9ff87154d77a914221d11cdc Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 10 Dec 2008 17:35:26 -0800 Subject: ARM: OMAP: switch to gpio_direction_input More switchover to the cross-platform GPIO interface: use gpio_direction_input(), not an OMAP-specific call. Signed-off-by: David Brownell Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-palmte.c | 4 ++-- arch/arm/mach-omap1/board-palmz71.c | 4 ++-- arch/arm/mach-omap1/board-voiceblue.c | 2 +- arch/arm/mach-omap1/fpga.c | 2 +- arch/arm/mach-omap1/serial.c | 2 +- arch/arm/mach-omap2/board-2430sdp.c | 2 +- arch/arm/mach-omap2/board-apollon.c | 8 ++++---- arch/arm/mach-omap2/usb-tusb6010.c | 2 +- arch/arm/plat-omap/debug-devices.c | 2 +- drivers/mtd/onenand/omap2.c | 2 +- drivers/usb/host/ohci-omap.c | 2 +- 11 files changed, 16 insertions(+), 16 deletions(-) (limited to 'drivers/mtd') diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index df663ba7ea8..0995a0fc1dd 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -351,14 +351,14 @@ static void __init palmte_misc_gpio_setup(void) printk(KERN_ERR "Could not reserve PINTDAV GPIO!\n"); return; } - omap_set_gpio_direction(PALMTE_PINTDAV_GPIO, 1); + gpio_direction_input(PALMTE_PINTDAV_GPIO); /* Set USB-or-DC-IN pin as input (unused) */ if (omap_request_gpio(PALMTE_USB_OR_DC_GPIO)) { printk(KERN_ERR "Could not reserve cable signal GPIO!\n"); return; } - omap_set_gpio_direction(PALMTE_USB_OR_DC_GPIO, 1); + gpio_direction_input(PALMTE_USB_OR_DC_GPIO); } static void __init omap_palmte_init(void) diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index c33766c4dd9..5a232adaefc 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -331,7 +331,7 @@ palmz71_gpio_setup(int early) printk(KERN_ERR "Could not reserve WP GPIO!\n"); return; } - omap_set_gpio_direction(PALMZ71_MMC_WP_GPIO, 1); + gpio_direction_input(PALMZ71_MMC_WP_GPIO); /* Monitor the Power-cable-connected signal */ if (omap_request_gpio(PALMZ71_USBDETECT_GPIO)) { @@ -339,7 +339,7 @@ palmz71_gpio_setup(int early) "Could not reserve cable signal GPIO!\n"); return; } - omap_set_gpio_direction(PALMZ71_USBDETECT_GPIO, 1); + gpio_direction_input(PALMZ71_USBDETECT_GPIO); if (request_irq(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), palmz71_powercable, IRQF_SAMPLE_RANDOM, "palmz71-cable", 0)) diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index d7ab11acc7e..86e73b7bffa 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -256,7 +256,7 @@ void voiceblue_wdt_disable(void) gpio_set_value(0, 0); gpio_set_value(0, 1); gpio_set_value(0, 0); - omap_set_gpio_direction(0, 1); + gpio_direction_input(0); } void voiceblue_wdt_ping(void) diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index 04995381aa5..40cf504a39f 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -178,7 +178,7 @@ void omap1510_fpga_init_irq(void) * gpio.[ch] */ omap_request_gpio(13); - omap_set_gpio_direction(13, 1); + gpio_direction_input(13); set_irq_type(OMAP_GPIO_IRQ(13), IRQ_TYPE_EDGE_RISING); set_irq_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux); } diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 528691d5cb5..1a0bc47a67c 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -250,7 +250,7 @@ static void __init omap_serial_set_port_wakeup(int gpio_nr) gpio_nr); return; } - omap_set_gpio_direction(gpio_nr, 1); + gpio_direction_input(gpio_nr); ret = request_irq(OMAP_GPIO_IRQ(gpio_nr), &omap_serial_wake_interrupt, IRQF_TRIGGER_RISING, "serial wakeup", NULL); if (ret) { diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 24688efaa44..f844a670f07 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -174,7 +174,7 @@ static inline void __init sdp2430_init_smc91x(void) gpmc_cs_free(eth_cs); goto out; } - omap_set_gpio_direction(OMAP24XX_ETHR_GPIO_IRQ, 1); + gpio_direction_input(OMAP24XX_ETHR_GPIO_IRQ); out: clk_disable(gpmc_fck); diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index a4ba52c8119..abc91672370 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -242,7 +242,7 @@ static inline void __init apollon_init_smc91x(void) gpmc_cs_free(APOLLON_ETH_CS); goto out; } - omap_set_gpio_direction(APOLLON_ETHR_GPIO_IRQ, 1); + gpio_direction_input(APOLLON_ETHR_GPIO_IRQ); out: clk_disable(gpmc_fck); @@ -327,15 +327,15 @@ static void __init apollon_sw_init(void) /* Enter SW - Y11 */ omap_cfg_reg(Y11_242X_GPIO16); omap_request_gpio(SW_ENTER_GPIO16); - omap_set_gpio_direction(SW_ENTER_GPIO16, 1); + gpio_direction_input(SW_ENTER_GPIO16); /* Up SW - AA12 */ omap_cfg_reg(AA12_242X_GPIO17); omap_request_gpio(SW_UP_GPIO17); - omap_set_gpio_direction(SW_UP_GPIO17, 1); + gpio_direction_input(SW_UP_GPIO17); /* Down SW - AA8 */ omap_cfg_reg(AA8_242X_GPIO58); omap_request_gpio(SW_DOWN_GPIO58); - omap_set_gpio_direction(SW_DOWN_GPIO58, 1); + gpio_direction_input(SW_DOWN_GPIO58); set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQ_TYPE_EDGE_RISING); if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt, diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 10ef464d6be..eb2399dc74c 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -297,7 +297,7 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, printk(error, 3, status); return status; } - omap_set_gpio_direction(irq, 1); + gpio_direction_input(irq); tusb_resources[2].start = irq + IH_GPIO_BASE; /* set up memory timings ... can speed them up later */ diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index e31154b15d9..60076a80084 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -77,7 +77,7 @@ int __init debug_card_init(u32 addr, unsigned gpio) printk(KERN_ERR "GPIO%d unavailable for smc91x IRQ\n", gpio); return status; } - omap_set_gpio_direction(gpio, 1); + gpio_direction_input(gpio); led_resources[0].start = addr; led_resources[0].end = addr + SZ_4K - 1; diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index cf1501d26a3..197d8e554cc 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -634,7 +634,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev) "OneNAND\n", c->gpio_irq); goto err_iounmap; } - omap_set_gpio_direction(c->gpio_irq, 1); + gpio_direction_input(c->gpio_irq); if ((r = request_irq(OMAP_GPIO_IRQ(c->gpio_irq), omap2_onenand_interrupt, IRQF_TRIGGER_RISING, diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 91697bdb399..22f6d1900b5 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -255,7 +255,7 @@ static int ohci_omap_init(struct usb_hcd *hcd) /* gpio9 for overcurrent detction */ omap_cfg_reg(W8_1610_GPIO9); omap_request_gpio(9); - omap_set_gpio_direction(9, 1 /* IN */); + gpio_direction_input(9); /* for paranoia's sake: disable USB.PUEN */ omap_cfg_reg(W4_USB_HIGHZ); -- cgit v1.2.3-70-g09d2 From 15f74b0335962e8554c91e52d588dc9f8ee7098d Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 10 Dec 2008 17:35:26 -0800 Subject: ARM: OMAP: use gpio_to_irq Have most uses of OMAP_GPIO_IRQ() use gpio_to_irq() instead. Calls used for table initialization are left alone, at least this time around. (This patch is for code in both the OMAP tree and mainline.) Signed-off-by: David Brownell Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-osk.c | 11 ++++++----- arch/arm/mach-omap1/board-palmz71.c | 8 ++++---- arch/arm/mach-omap1/board-voiceblue.c | 8 ++++---- arch/arm/mach-omap1/fpga.c | 2 +- arch/arm/mach-omap1/serial.c | 4 ++-- arch/arm/plat-omap/debug-devices.c | 4 ++-- drivers/input/keyboard/omap-keypad.c | 8 ++++---- drivers/mtd/onenand/omap2.c | 6 +++--- 8 files changed, 26 insertions(+), 25 deletions(-) (limited to 'drivers/mtd') diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 3e766e49f7c..2f880958b83 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -288,7 +288,7 @@ static void __init osk_init_cf(void) return; } /* the CF I/O IRQ is really active-low */ - set_irq_type(OMAP_GPIO_IRQ(62), IRQ_TYPE_EDGE_FALLING); + set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING); } static void __init osk_init_irq(void) @@ -483,7 +483,7 @@ static void __init osk_mistral_init(void) omap_cfg_reg(P20_1610_GPIO4); /* PENIRQ */ gpio_request(4, "ts_int"); gpio_direction_input(4); - set_irq_type(OMAP_GPIO_IRQ(4), IRQ_TYPE_EDGE_FALLING); + set_irq_type(gpio_to_irq(4), IRQ_TYPE_EDGE_FALLING); spi_register_board_info(mistral_boardinfo, ARRAY_SIZE(mistral_boardinfo)); @@ -492,14 +492,15 @@ static void __init osk_mistral_init(void) omap_cfg_reg(N15_1610_MPUIO2); if (gpio_request(OMAP_MPUIO(2), "wakeup") == 0) { int ret = 0; + int irq = gpio_to_irq(OMAP_MPUIO(2)); gpio_direction_input(OMAP_MPUIO(2)); - set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQ_TYPE_EDGE_RISING); + set_irq_type(irq, IRQ_TYPE_EDGE_RISING); #ifdef CONFIG_PM /* share the IRQ in case someone wants to use the * button for more than wakeup from system sleep. */ - ret = request_irq(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), + ret = request_irq(irq, &osk_mistral_wake_interrupt, IRQF_SHARED, "mistral_wakeup", &osk_mistral_wake_interrupt); @@ -508,7 +509,7 @@ static void __init osk_mistral_init(void) printk(KERN_ERR "OSK+Mistral: no wakeup irq, %d?\n", ret); } else - enable_irq_wake(OMAP_GPIO_IRQ(OMAP_MPUIO(2))); + enable_irq_wake(irq); #endif } else printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n"); diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index dec20104eb5..1b7d3580d14 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -297,11 +297,11 @@ palmz71_powercable(int irq, void *dev_id) { if (gpio_get_value(PALMZ71_USBDETECT_GPIO)) { printk(KERN_INFO "PM: Power cable connected\n"); - set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), + set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO), IRQ_TYPE_EDGE_FALLING); } else { printk(KERN_INFO "PM: Power cable disconnected\n"); - set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), + set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO), IRQ_TYPE_EDGE_RISING); } return IRQ_HANDLED; @@ -339,12 +339,12 @@ palmz71_gpio_setup(int early) return; } gpio_direction_input(PALMZ71_USBDETECT_GPIO); - if (request_irq(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), + if (request_irq(gpio_to_irq(PALMZ71_USBDETECT_GPIO), palmz71_powercable, IRQF_SAMPLE_RANDOM, "palmz71-cable", 0)) printk(KERN_ERR "IRQ request for power cable failed!\n"); - palmz71_powercable(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), 0); + palmz71_powercable(gpio_to_irq(PALMZ71_USBDETECT_GPIO), 0); } } diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 43b008f639f..bb4f4a8aea3 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -185,10 +185,10 @@ static void __init voiceblue_init(void) omap_request_gpio(13); omap_request_gpio(14); omap_request_gpio(15); - set_irq_type(OMAP_GPIO_IRQ(12), IRQ_TYPE_EDGE_RISING); - set_irq_type(OMAP_GPIO_IRQ(13), IRQ_TYPE_EDGE_RISING); - set_irq_type(OMAP_GPIO_IRQ(14), IRQ_TYPE_EDGE_RISING); - set_irq_type(OMAP_GPIO_IRQ(15), IRQ_TYPE_EDGE_RISING); + set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING); + set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING); + set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING); + set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING); platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); omap_board_config = voiceblue_config; diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index 40cf504a39f..55748ec26e1 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -179,7 +179,7 @@ void omap1510_fpga_init_irq(void) */ omap_request_gpio(13); gpio_direction_input(13); - set_irq_type(OMAP_GPIO_IRQ(13), IRQ_TYPE_EDGE_RISING); + set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING); set_irq_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux); } diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 1a0bc47a67c..b63da3f70c3 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -251,7 +251,7 @@ static void __init omap_serial_set_port_wakeup(int gpio_nr) return; } gpio_direction_input(gpio_nr); - ret = request_irq(OMAP_GPIO_IRQ(gpio_nr), &omap_serial_wake_interrupt, + ret = request_irq(gpio_to_irq(gpio_nr), &omap_serial_wake_interrupt, IRQF_TRIGGER_RISING, "serial wakeup", NULL); if (ret) { omap_free_gpio(gpio_nr); @@ -259,7 +259,7 @@ static void __init omap_serial_set_port_wakeup(int gpio_nr) gpio_nr); return; } - enable_irq_wake(OMAP_GPIO_IRQ(gpio_nr)); + enable_irq_wake(gpio_to_irq(gpio_nr)); } static int __init omap_serial_wakeup_init(void) diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index 60076a80084..7d9c87c6574 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -69,8 +69,8 @@ int __init debug_card_init(u32 addr, unsigned gpio) smc91x_resources[0].start = addr + 0x300; smc91x_resources[0].end = addr + 0x30f; - smc91x_resources[1].start = OMAP_GPIO_IRQ(gpio); - smc91x_resources[1].end = OMAP_GPIO_IRQ(gpio); + smc91x_resources[1].start = gpio_to_irq(gpio); + smc91x_resources[1].end = gpio_to_irq(gpio); status = omap_request_gpio(gpio); if (status < 0) { diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c index 69e674ecf19..db22fd9b4cf 100644 --- a/drivers/input/keyboard/omap-keypad.c +++ b/drivers/input/keyboard/omap-keypad.c @@ -101,7 +101,7 @@ static irqreturn_t omap_kp_interrupt(int irq, void *dev_id) if (cpu_is_omap24xx()) { int i; for (i = 0; i < omap_kp->rows; i++) - disable_irq(OMAP_GPIO_IRQ(row_gpios[i])); + disable_irq(gpio_to_irq(row_gpios[i])); } else /* disable keyboard interrupt and schedule for handling */ omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); @@ -224,7 +224,7 @@ static void omap_kp_tasklet(unsigned long data) if (cpu_is_omap24xx()) { int i; for (i = 0; i < omap_kp_data->rows; i++) - enable_irq(OMAP_GPIO_IRQ(row_gpios[i])); + enable_irq(gpio_to_irq(row_gpios[i])); } else { omap_writew(0, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); kp_cur_group = -1; @@ -397,7 +397,7 @@ static int __init omap_kp_probe(struct platform_device *pdev) omap_writew(0, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); } else { for (irq_idx = 0; irq_idx < omap_kp->rows; irq_idx++) { - if (request_irq(OMAP_GPIO_IRQ(row_gpios[irq_idx]), + if (request_irq(gpio_to_irq(row_gpios[irq_idx]), omap_kp_interrupt, IRQF_TRIGGER_FALLING, "omap-keypad", omap_kp) < 0) @@ -438,7 +438,7 @@ static int omap_kp_remove(struct platform_device *pdev) gpio_free(col_gpios[i]); for (i = 0; i < omap_kp->rows; i++) { gpio_free(row_gpios[i]); - free_irq(OMAP_GPIO_IRQ(row_gpios[i]), 0); + free_irq(gpio_to_irq(row_gpios[i]), 0); } } else { omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index 197d8e554cc..d1e0b8e7224 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -636,7 +636,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev) } gpio_direction_input(c->gpio_irq); - if ((r = request_irq(OMAP_GPIO_IRQ(c->gpio_irq), + if ((r = request_irq(gpio_to_irq(c->gpio_irq), omap2_onenand_interrupt, IRQF_TRIGGER_RISING, pdev->dev.driver->name, c)) < 0) goto err_release_gpio; @@ -723,7 +723,7 @@ err_release_dma: if (c->dma_channel != -1) omap_free_dma(c->dma_channel); if (c->gpio_irq) - free_irq(OMAP_GPIO_IRQ(c->gpio_irq), c); + free_irq(gpio_to_irq(c->gpio_irq), c); err_release_gpio: if (c->gpio_irq) omap_free_gpio(c->gpio_irq); @@ -760,7 +760,7 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev) omap2_onenand_shutdown(pdev); platform_set_drvdata(pdev, NULL); if (c->gpio_irq) { - free_irq(OMAP_GPIO_IRQ(c->gpio_irq), c); + free_irq(gpio_to_irq(c->gpio_irq), c); omap_free_gpio(c->gpio_irq); } iounmap(c->onenand.base); -- cgit v1.2.3-70-g09d2 From 70d13e083c8589dd3edc2313777655da39cb3568 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 6 Dec 2008 08:25:16 +0000 Subject: [ARM] netwinder: clean up GPIO naming Netwinder was using gpio_xxx names which could clash with the GPIO layer. Add a 'nw_' prefix to ensure that these remain separate. Signed-off-by: Russell King --- arch/arm/mach-footbridge/cats-hw.c | 1 + arch/arm/mach-footbridge/common.c | 1 + arch/arm/mach-footbridge/dc21285-timer.c | 1 + arch/arm/mach-footbridge/dc21285.c | 1 + arch/arm/mach-footbridge/dma.c | 1 + arch/arm/mach-footbridge/ebsa285.c | 1 + arch/arm/mach-footbridge/include/mach/hardware.h | 9 ++-- arch/arm/mach-footbridge/isa-irq.c | 1 + arch/arm/mach-footbridge/netwinder-hw.c | 54 ++++++++++++------------ arch/arm/mach-footbridge/netwinder-leds.c | 7 ++- arch/arm/mach-footbridge/personal.c | 1 + drivers/char/ds1620.c | 25 ++++++----- drivers/char/nwflash.c | 8 ++-- drivers/mtd/maps/dc21285.c | 7 ++- sound/oss/waveartist.c | 8 ++-- 15 files changed, 64 insertions(+), 62 deletions(-) (limited to 'drivers/mtd') diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c index 6a5b437ab86..1b996b26d2e 100644 --- a/arch/arm/mach-footbridge/cats-hw.c +++ b/arch/arm/mach-footbridge/cats-hw.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c index 818014e09f4..36ff06d4df1 100644 --- a/arch/arm/mach-footbridge/common.c +++ b/arch/arm/mach-footbridge/common.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c index b2a21189dd8..da35bc5c5cc 100644 --- a/arch/arm/mach-footbridge/dc21285-timer.c +++ b/arch/arm/mach-footbridge/dc21285-timer.c @@ -7,6 +7,7 @@ #include #include #include +#include #include diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index d4c1e526f59..133086019e3 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include diff --git a/arch/arm/mach-footbridge/dma.c b/arch/arm/mach-footbridge/dma.c index b653e9cfa3f..4f350634696 100644 --- a/arch/arm/mach-footbridge/dma.c +++ b/arch/arm/mach-footbridge/dma.c @@ -12,6 +12,7 @@ */ #include #include +#include #include #include diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c index b1d3bf20a41..30040fd588c 100644 --- a/arch/arm/mach-footbridge/ebsa285.c +++ b/arch/arm/mach-footbridge/ebsa285.c @@ -4,6 +4,7 @@ * EBSA285 machine fixup */ #include +#include #include #include diff --git a/arch/arm/mach-footbridge/include/mach/hardware.h b/arch/arm/mach-footbridge/include/mach/hardware.h index ff44e0ce2e1..51dd902043a 100644 --- a/arch/arm/mach-footbridge/include/mach/hardware.h +++ b/arch/arm/mach-footbridge/include/mach/hardware.h @@ -86,10 +86,11 @@ #define CPLD_FLASH_WR_ENABLE 1 #ifndef __ASSEMBLY__ -extern void gpio_modify_op(int mask, int set); -extern void gpio_modify_io(int mask, int in); -extern int gpio_read(void); -extern void cpld_modify(int mask, int set); +extern spinlock_t nw_gpio_lock; +extern void nw_gpio_modify_op(unsigned int mask, unsigned int set); +extern void nw_gpio_modify_io(unsigned int mask, unsigned int in); +extern unsigned int nw_gpio_read(void); +extern void nw_cpld_modify(unsigned int mask, unsigned int set); #endif #define pcibios_assign_all_busses() 1 diff --git a/arch/arm/mach-footbridge/isa-irq.c b/arch/arm/mach-footbridge/isa-irq.c index 54fec9ae28b..9ee80a211d3 100644 --- a/arch/arm/mach-footbridge/isa-irq.c +++ b/arch/arm/mach-footbridge/isa-irq.c @@ -19,6 +19,7 @@ #include #include #include +#include #include diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c index 00b0ddcac28..ac7ffa6fc41 100644 --- a/arch/arm/mach-footbridge/netwinder-hw.c +++ b/arch/arm/mach-footbridge/netwinder-hw.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include @@ -67,13 +68,14 @@ static inline void wb977_ww(int reg, int val) /* * This is a lock for accessing ports GP1_IO_BASE and GP2_IO_BASE */ -DEFINE_SPINLOCK(gpio_lock); +DEFINE_SPINLOCK(nw_gpio_lock); +EXPORT_SYMBOL(nw_gpio_lock); static unsigned int current_gpio_op; static unsigned int current_gpio_io; static unsigned int current_cpld; -void gpio_modify_op(int mask, int set) +void nw_gpio_modify_op(unsigned int mask, unsigned int set) { unsigned int new_gpio, changed; @@ -86,6 +88,7 @@ void gpio_modify_op(int mask, int set) if (changed & 0xff00) outb(new_gpio >> 8, GP2_IO_BASE); } +EXPORT_SYMBOL(nw_gpio_modify_op); static inline void __gpio_modify_io(int mask, int in) { @@ -118,7 +121,7 @@ static inline void __gpio_modify_io(int mask, int in) } } -void gpio_modify_io(int mask, int in) +void nw_gpio_modify_io(unsigned int mask, unsigned int in) { /* Open up the SuperIO chip */ wb977_open(); @@ -128,11 +131,13 @@ void gpio_modify_io(int mask, int in) /* Close up the EFER gate */ wb977_close(); } +EXPORT_SYMBOL(nw_gpio_modify_io); -int gpio_read(void) +unsigned int nw_gpio_read(void) { return inb(GP1_IO_BASE) | inb(GP2_IO_BASE) << 8; } +EXPORT_SYMBOL(nw_gpio_read); /* * Initialise the Winbond W83977F global registers @@ -322,9 +327,9 @@ static inline void wb977_init_gpio(void) /* * Set Group1/Group2 outputs */ - spin_lock_irqsave(&gpio_lock, flags); - gpio_modify_op(-1, GPIO_RED_LED | GPIO_FAN); - spin_unlock_irqrestore(&gpio_lock, flags); + spin_lock_irqsave(&nw_gpio_lock, flags); + nw_gpio_modify_op(-1, GPIO_RED_LED | GPIO_FAN); + spin_unlock_irqrestore(&nw_gpio_lock, flags); } /* @@ -359,34 +364,35 @@ static void __init wb977_init(void) wb977_close(); } -void cpld_modify(int mask, int set) +void nw_cpld_modify(unsigned int mask, unsigned int set) { int msk; current_cpld = (current_cpld & ~mask) | set; - gpio_modify_io(GPIO_DATA | GPIO_IOCLK | GPIO_IOLOAD, 0); - gpio_modify_op(GPIO_IOLOAD, 0); + nw_gpio_modify_io(GPIO_DATA | GPIO_IOCLK | GPIO_IOLOAD, 0); + nw_gpio_modify_op(GPIO_IOLOAD, 0); for (msk = 8; msk; msk >>= 1) { int bit = current_cpld & msk; - gpio_modify_op(GPIO_DATA | GPIO_IOCLK, bit ? GPIO_DATA : 0); - gpio_modify_op(GPIO_IOCLK, GPIO_IOCLK); + nw_gpio_modify_op(GPIO_DATA | GPIO_IOCLK, bit ? GPIO_DATA : 0); + nw_gpio_modify_op(GPIO_IOCLK, GPIO_IOCLK); } - gpio_modify_op(GPIO_IOCLK|GPIO_DATA, 0); - gpio_modify_op(GPIO_IOLOAD|GPIO_DSCLK, GPIO_IOLOAD|GPIO_DSCLK); - gpio_modify_op(GPIO_IOLOAD, 0); + nw_gpio_modify_op(GPIO_IOCLK|GPIO_DATA, 0); + nw_gpio_modify_op(GPIO_IOLOAD|GPIO_DSCLK, GPIO_IOLOAD|GPIO_DSCLK); + nw_gpio_modify_op(GPIO_IOLOAD, 0); } +EXPORT_SYMBOL(nw_cpld_modify); static void __init cpld_init(void) { unsigned long flags; - spin_lock_irqsave(&gpio_lock, flags); - cpld_modify(-1, CPLD_UNMUTE | CPLD_7111_DISABLE); - spin_unlock_irqrestore(&gpio_lock, flags); + spin_lock_irqsave(&nw_gpio_lock, flags); + nw_cpld_modify(-1, CPLD_UNMUTE | CPLD_7111_DISABLE); + spin_unlock_irqrestore(&nw_gpio_lock, flags); } static unsigned char rwa_unlock[] __initdata = @@ -596,12 +602,6 @@ static void __init rwa010_init(void) rwa010_soundblaster_reset(); } -EXPORT_SYMBOL(gpio_lock); -EXPORT_SYMBOL(gpio_modify_op); -EXPORT_SYMBOL(gpio_modify_io); -EXPORT_SYMBOL(cpld_modify); -EXPORT_SYMBOL(gpio_read); - /* * Initialise any other hardware after we've got the PCI bus * initialised. We may need the PCI bus to talk to this other @@ -616,9 +616,9 @@ static int __init nw_hw_init(void) cpld_init(); rwa010_init(); - spin_lock_irqsave(&gpio_lock, flags); - gpio_modify_op(GPIO_RED_LED|GPIO_GREEN_LED, DEFAULT_LEDS); - spin_unlock_irqrestore(&gpio_lock, flags); + spin_lock_irqsave(&nw_gpio_lock, flags); + nw_gpio_modify_op(GPIO_RED_LED|GPIO_GREEN_LED, DEFAULT_LEDS); + spin_unlock_irqrestore(&nw_gpio_lock, flags); } return 0; } diff --git a/arch/arm/mach-footbridge/netwinder-leds.c b/arch/arm/mach-footbridge/netwinder-leds.c index d91a4f4a32d..00269fe0be8 100644 --- a/arch/arm/mach-footbridge/netwinder-leds.c +++ b/arch/arm/mach-footbridge/netwinder-leds.c @@ -32,7 +32,6 @@ static char led_state; static char hw_led_state; static DEFINE_SPINLOCK(leds_lock); -extern spinlock_t gpio_lock; static void netwinder_leds_event(led_event_t evt) { @@ -121,9 +120,9 @@ static void netwinder_leds_event(led_event_t evt) spin_unlock_irqrestore(&leds_lock, flags); if (led_state & LED_STATE_ENABLED) { - spin_lock_irqsave(&gpio_lock, flags); - gpio_modify_op(GPIO_RED_LED | GPIO_GREEN_LED, hw_led_state); - spin_unlock_irqrestore(&gpio_lock, flags); + spin_lock_irqsave(&nw_gpio_lock, flags); + nw_gpio_modify_op(GPIO_RED_LED | GPIO_GREEN_LED, hw_led_state); + spin_unlock_irqrestore(&nw_gpio_lock, flags); } } diff --git a/arch/arm/mach-footbridge/personal.c b/arch/arm/mach-footbridge/personal.c index c4f843fc099..e2c9f0690b1 100644 --- a/arch/arm/mach-footbridge/personal.c +++ b/arch/arm/mach-footbridge/personal.c @@ -4,6 +4,7 @@ * Personal server (Skiff) machine fixup */ #include +#include #include #include diff --git a/drivers/char/ds1620.c b/drivers/char/ds1620.c index 74e9cd81b5b..61f0146e215 100644 --- a/drivers/char/ds1620.c +++ b/drivers/char/ds1620.c @@ -43,52 +43,51 @@ static const char *fan_state[] = { "off", "on", "on (hardwired)" }; * chance that the WaveArtist driver could touch these bits to * enable or disable the speaker. */ -extern spinlock_t gpio_lock; extern unsigned int system_rev; static inline void netwinder_ds1620_set_clk(int clk) { - gpio_modify_op(GPIO_DSCLK, clk ? GPIO_DSCLK : 0); + nw_gpio_modify_op(GPIO_DSCLK, clk ? GPIO_DSCLK : 0); } static inline void netwinder_ds1620_set_data(int dat) { - gpio_modify_op(GPIO_DATA, dat ? GPIO_DATA : 0); + nw_gpio_modify_op(GPIO_DATA, dat ? GPIO_DATA : 0); } static inline int netwinder_ds1620_get_data(void) { - return gpio_read() & GPIO_DATA; + return nw_gpio_read() & GPIO_DATA; } static inline void netwinder_ds1620_set_data_dir(int dir) { - gpio_modify_io(GPIO_DATA, dir ? GPIO_DATA : 0); + nw_gpio_modify_io(GPIO_DATA, dir ? GPIO_DATA : 0); } static inline void netwinder_ds1620_reset(void) { - cpld_modify(CPLD_DS_ENABLE, 0); - cpld_modify(CPLD_DS_ENABLE, CPLD_DS_ENABLE); + nw_cpld_modify(CPLD_DS_ENABLE, 0); + nw_cpld_modify(CPLD_DS_ENABLE, CPLD_DS_ENABLE); } static inline void netwinder_lock(unsigned long *flags) { - spin_lock_irqsave(&gpio_lock, *flags); + spin_lock_irqsave(&nw_gpio_lock, *flags); } static inline void netwinder_unlock(unsigned long *flags) { - spin_unlock_irqrestore(&gpio_lock, *flags); + spin_unlock_irqrestore(&nw_gpio_lock, *flags); } static inline void netwinder_set_fan(int i) { unsigned long flags; - spin_lock_irqsave(&gpio_lock, flags); - gpio_modify_op(GPIO_FAN, i ? GPIO_FAN : 0); - spin_unlock_irqrestore(&gpio_lock, flags); + spin_lock_irqsave(&nw_gpio_lock, flags); + nw_gpio_modify_op(GPIO_FAN, i ? GPIO_FAN : 0); + spin_unlock_irqrestore(&nw_gpio_lock, flags); } static inline int netwinder_get_fan(void) @@ -96,7 +95,7 @@ static inline int netwinder_get_fan(void) if ((system_rev & 0xf000) == 0x4000) return FAN_ALWAYS_ON; - return (gpio_read() & GPIO_FAN) ? FAN_ON : FAN_OFF; + return (nw_gpio_read() & GPIO_FAN) ? FAN_ON : FAN_OFF; } /* diff --git a/drivers/char/nwflash.c b/drivers/char/nwflash.c index 006be92ee3f..8c7df5ba088 100644 --- a/drivers/char/nwflash.c +++ b/drivers/char/nwflash.c @@ -58,8 +58,6 @@ static volatile unsigned char *FLASH_BASE; static int gbFlashSize = KFLASH_SIZE; static DEFINE_MUTEX(nwflash_mutex); -extern spinlock_t gpio_lock; - static int get_flash_id(void) { volatile unsigned int c1, c2; @@ -616,9 +614,9 @@ static void kick_open(void) * we want to write a bit pattern XXX1 to Xilinx to enable * the write gate, which will be open for about the next 2ms. */ - spin_lock_irqsave(&gpio_lock, flags); - cpld_modify(1, 1); - spin_unlock_irqrestore(&gpio_lock, flags); + spin_lock_irqsave(&nw_gpio_lock, flags); + nw_cpld_modify(CPLD_FLASH_WR_ENABLE, CPLD_FLASH_WR_ENABLE); + spin_unlock_irqrestore(&nw_gpio_lock, flags); /* * let the ISA bus to catch on... diff --git a/drivers/mtd/maps/dc21285.c b/drivers/mtd/maps/dc21285.c index 3aa018c092f..42969fe051b 100644 --- a/drivers/mtd/maps/dc21285.c +++ b/drivers/mtd/maps/dc21285.c @@ -32,16 +32,15 @@ static struct mtd_info *dc21285_mtd; */ static void nw_en_write(void) { - extern spinlock_t gpio_lock; unsigned long flags; /* * we want to write a bit pattern XXX1 to Xilinx to enable * the write gate, which will be open for about the next 2ms. */ - spin_lock_irqsave(&gpio_lock, flags); - cpld_modify(1, 1); - spin_unlock_irqrestore(&gpio_lock, flags); + spin_lock_irqsave(&nw_gpio_lock, flags); + nw_cpld_modify(CPLD_FLASH_WR_ENABLE, CPLD_FLASH_WR_ENABLE); + spin_unlock_irqrestore(&nw_gpio_lock, flags); /* * let the ISA bus to catch on... diff --git a/sound/oss/waveartist.c b/sound/oss/waveartist.c index c47842fad65..2c63bb9da74 100644 --- a/sound/oss/waveartist.c +++ b/sound/oss/waveartist.c @@ -1483,16 +1483,14 @@ static void __exit unload_waveartist(struct address_info *hw) #define VNC_HANDSET_DETECT 0x40 #define VNC_DISABLE_AUTOSWITCH 0x80 -extern spinlock_t gpio_lock; - static inline void vnc_mute_spkr(wavnc_info *devc) { unsigned long flags; - spin_lock_irqsave(&gpio_lock, flags); - cpld_modify(CPLD_UNMUTE, devc->spkr_mute_state ? 0 : CPLD_UNMUTE); - spin_unlock_irqrestore(&gpio_lock, flags); + spin_lock_irqsave(&nw_gpio_lock, flags); + nw_cpld_modify(CPLD_UNMUTE, devc->spkr_mute_state ? 0 : CPLD_UNMUTE); + spin_unlock_irqrestore(&nw_gpio_lock, flags); } static void -- cgit v1.2.3-70-g09d2 From 23553b2c08c9b6e96be98c44feb9c5e640d3e789 Mon Sep 17 00:00:00 2001 From: Xiaochuan-Xu Date: Tue, 9 Dec 2008 19:44:12 +0800 Subject: UBI: prepare for protection tree improvements This patch modifies @struct ubi_wl_entry and adds union which contains only one element so far. This is just a preparation for further changes which will kill the protection tree and make UBI use a list instead. Signed-off-by: Xiaochuan-Xu Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/ubi.h | 6 ++++-- drivers/mtd/ubi/wl.c | 45 +++++++++++++++++++++++---------------------- 2 files changed, 27 insertions(+), 24 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h index 1c3fa18c26a..46a4763f8e7 100644 --- a/drivers/mtd/ubi/ubi.h +++ b/drivers/mtd/ubi/ubi.h @@ -95,7 +95,7 @@ enum { /** * struct ubi_wl_entry - wear-leveling entry. - * @rb: link in the corresponding RB-tree + * @u.rb: link in the corresponding (free/used) RB-tree * @ec: erase counter * @pnum: physical eraseblock number * @@ -104,7 +104,9 @@ enum { * RB-trees. See WL sub-system for details. */ struct ubi_wl_entry { - struct rb_node rb; + union { + struct rb_node rb; + } u; int ec; int pnum; }; diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index abf65ea414e..0279bf9dc72 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -220,7 +220,7 @@ static void wl_tree_add(struct ubi_wl_entry *e, struct rb_root *root) struct ubi_wl_entry *e1; parent = *p; - e1 = rb_entry(parent, struct ubi_wl_entry, rb); + e1 = rb_entry(parent, struct ubi_wl_entry, u.rb); if (e->ec < e1->ec) p = &(*p)->rb_left; @@ -235,8 +235,8 @@ static void wl_tree_add(struct ubi_wl_entry *e, struct rb_root *root) } } - rb_link_node(&e->rb, parent, p); - rb_insert_color(&e->rb, root); + rb_link_node(&e->u.rb, parent, p); + rb_insert_color(&e->u.rb, root); } /** @@ -331,7 +331,7 @@ static int in_wl_tree(struct ubi_wl_entry *e, struct rb_root *root) while (p) { struct ubi_wl_entry *e1; - e1 = rb_entry(p, struct ubi_wl_entry, rb); + e1 = rb_entry(p, struct ubi_wl_entry, u.rb); if (e->pnum == e1->pnum) { ubi_assert(e == e1); @@ -413,14 +413,14 @@ static struct ubi_wl_entry *find_wl_entry(struct rb_root *root, int max) struct rb_node *p; struct ubi_wl_entry *e; - e = rb_entry(rb_first(root), struct ubi_wl_entry, rb); + e = rb_entry(rb_first(root), struct ubi_wl_entry, u.rb); max += e->ec; p = root->rb_node; while (p) { struct ubi_wl_entry *e1; - e1 = rb_entry(p, struct ubi_wl_entry, rb); + e1 = rb_entry(p, struct ubi_wl_entry, u.rb); if (e1->ec >= max) p = p->rb_left; else { @@ -491,12 +491,13 @@ retry: * eraseblock with erase counter greater or equivalent than the * lowest erase counter plus %WL_FREE_MAX_DIFF. */ - first = rb_entry(rb_first(&ubi->free), struct ubi_wl_entry, rb); - last = rb_entry(rb_last(&ubi->free), struct ubi_wl_entry, rb); + first = rb_entry(rb_first(&ubi->free), struct ubi_wl_entry, + u.rb); + last = rb_entry(rb_last(&ubi->free), struct ubi_wl_entry, u.rb); if (last->ec - first->ec < WL_FREE_MAX_DIFF) e = rb_entry(ubi->free.rb_node, - struct ubi_wl_entry, rb); + struct ubi_wl_entry, u.rb); else { medium_ec = (first->ec + WL_FREE_MAX_DIFF)/2; e = find_wl_entry(&ubi->free, medium_ec); @@ -508,7 +509,7 @@ retry: * For short term data we pick a physical eraseblock with the * lowest erase counter as we expect it will be erased soon. */ - e = rb_entry(rb_first(&ubi->free), struct ubi_wl_entry, rb); + e = rb_entry(rb_first(&ubi->free), struct ubi_wl_entry, u.rb); protect = ST_PROTECTION; break; default: @@ -522,7 +523,7 @@ retry: * be protected from being moved for some time. */ paranoid_check_in_wl_tree(e, &ubi->free); - rb_erase(&e->rb, &ubi->free); + rb_erase(&e->u.rb, &ubi->free); prot_tree_add(ubi, e, pe, protect); dbg_wl("PEB %d EC %d, protection %d", e->pnum, e->ec, protect); @@ -779,7 +780,7 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk, * highly worn-out free physical eraseblock. If the erase * counters differ much enough, start wear-leveling. */ - e1 = rb_entry(rb_first(&ubi->used), struct ubi_wl_entry, rb); + e1 = rb_entry(rb_first(&ubi->used), struct ubi_wl_entry, u.rb); e2 = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF); if (!(e2->ec - e1->ec >= UBI_WL_THRESHOLD)) { @@ -788,21 +789,21 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk, goto out_cancel; } paranoid_check_in_wl_tree(e1, &ubi->used); - rb_erase(&e1->rb, &ubi->used); + rb_erase(&e1->u.rb, &ubi->used); dbg_wl("move PEB %d EC %d to PEB %d EC %d", e1->pnum, e1->ec, e2->pnum, e2->ec); } else { /* Perform scrubbing */ scrubbing = 1; - e1 = rb_entry(rb_first(&ubi->scrub), struct ubi_wl_entry, rb); + e1 = rb_entry(rb_first(&ubi->scrub), struct ubi_wl_entry, u.rb); e2 = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF); paranoid_check_in_wl_tree(e1, &ubi->scrub); - rb_erase(&e1->rb, &ubi->scrub); + rb_erase(&e1->u.rb, &ubi->scrub); dbg_wl("scrub PEB %d to PEB %d", e1->pnum, e2->pnum); } paranoid_check_in_wl_tree(e2, &ubi->free); - rb_erase(&e2->rb, &ubi->free); + rb_erase(&e2->u.rb, &ubi->free); ubi->move_from = e1; ubi->move_to = e2; spin_unlock(&ubi->wl_lock); @@ -1012,7 +1013,7 @@ static int ensure_wear_leveling(struct ubi_device *ubi) * erase counter of free physical eraseblocks is greater then * %UBI_WL_THRESHOLD. */ - e1 = rb_entry(rb_first(&ubi->used), struct ubi_wl_entry, rb); + e1 = rb_entry(rb_first(&ubi->used), struct ubi_wl_entry, u.rb); e2 = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF); if (!(e2->ec - e1->ec >= UBI_WL_THRESHOLD)) @@ -1214,10 +1215,10 @@ retry: } else { if (in_wl_tree(e, &ubi->used)) { paranoid_check_in_wl_tree(e, &ubi->used); - rb_erase(&e->rb, &ubi->used); + rb_erase(&e->u.rb, &ubi->used); } else if (in_wl_tree(e, &ubi->scrub)) { paranoid_check_in_wl_tree(e, &ubi->scrub); - rb_erase(&e->rb, &ubi->scrub); + rb_erase(&e->u.rb, &ubi->scrub); } else { err = prot_tree_del(ubi, e->pnum); if (err) { @@ -1279,7 +1280,7 @@ retry: if (in_wl_tree(e, &ubi->used)) { paranoid_check_in_wl_tree(e, &ubi->used); - rb_erase(&e->rb, &ubi->used); + rb_erase(&e->u.rb, &ubi->used); } else { int err; @@ -1361,11 +1362,11 @@ static void tree_destroy(struct rb_root *root) else if (rb->rb_right) rb = rb->rb_right; else { - e = rb_entry(rb, struct ubi_wl_entry, rb); + e = rb_entry(rb, struct ubi_wl_entry, u.rb); rb = rb_parent(rb); if (rb) { - if (rb->rb_left == &e->rb) + if (rb->rb_left == &e->u.rb) rb->rb_left = NULL; else rb->rb_right = NULL; -- cgit v1.2.3-70-g09d2 From 7b6c32daec3bff380ced6822002bc352bdf2c982 Mon Sep 17 00:00:00 2001 From: Xiaochuan-Xu Date: Mon, 15 Dec 2008 21:07:41 +0800 Subject: UBI: simplify PEB protection code UBI has 2 RB-trees to implement PEB protection, which is too much for simply prevent PEB from being moved for some time. This patch implements this using lists. The benefits: 1. No need to allocate protection entry on each PEB get. 2. No need to maintain balanced trees and walk them. Signed-off-by: Xiaochuan-Xu Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/ubi.h | 39 +++--- drivers/mtd/ubi/wl.c | 364 +++++++++++++++++++------------------------------- 2 files changed, 162 insertions(+), 241 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h index 46a4763f8e7..4a8ec485c91 100644 --- a/drivers/mtd/ubi/ubi.h +++ b/drivers/mtd/ubi/ubi.h @@ -73,6 +73,13 @@ */ #define UBI_IO_RETRIES 3 +/* + * Length of the protection queue. The length is effectively equivalent to the + * number of (global) erase cycles PEBs are protected from the wear-leveling + * worker. + */ +#define UBI_PROT_QUEUE_LEN 10 + /* * Error codes returned by the I/O sub-system. * @@ -96,6 +103,7 @@ enum { /** * struct ubi_wl_entry - wear-leveling entry. * @u.rb: link in the corresponding (free/used) RB-tree + * @u.list: link in the protection queue * @ec: erase counter * @pnum: physical eraseblock number * @@ -106,6 +114,7 @@ enum { struct ubi_wl_entry { union { struct rb_node rb; + struct list_head list; } u; int ec; int pnum; @@ -290,7 +299,7 @@ struct ubi_wl_entry; * @beb_rsvd_level: normal level of PEBs reserved for bad PEB handling * * @autoresize_vol_id: ID of the volume which has to be auto-resized at the end - * of UBI ititializetion + * of UBI initialization * @vtbl_slots: how many slots are available in the volume table * @vtbl_size: size of the volume table in bytes * @vtbl: in-RAM volume table copy @@ -308,18 +317,17 @@ struct ubi_wl_entry; * @used: RB-tree of used physical eraseblocks * @free: RB-tree of free physical eraseblocks * @scrub: RB-tree of physical eraseblocks which need scrubbing - * @prot: protection trees - * @prot.pnum: protection tree indexed by physical eraseblock numbers - * @prot.aec: protection tree indexed by absolute erase counter value - * @wl_lock: protects the @used, @free, @prot, @lookuptbl, @abs_ec, @move_from, - * @move_to, @move_to_put @erase_pending, @wl_scheduled, and @works - * fields + * @pq: protection queue (contain physical eraseblocks which are temporarily + * protected from the wear-leveling worker) + * @pq_head: protection queue head + * @wl_lock: protects the @used, @free, @pq, @pq_head, @lookuptbl, @move_from, + * @move_to, @move_to_put @erase_pending, @wl_scheduled and @works + * fields * @move_mutex: serializes eraseblock moves - * @work_sem: sycnhronizes the WL worker with use tasks + * @work_sem: synchronizes the WL worker with use tasks * @wl_scheduled: non-zero if the wear-leveling was scheduled * @lookuptbl: a table to quickly find a &struct ubi_wl_entry object for any * physical eraseblock - * @abs_ec: absolute erase counter * @move_from: physical eraseblock from where the data is being moved * @move_to: physical eraseblock where the data is being moved to * @move_to_put: if the "to" PEB was put @@ -353,11 +361,11 @@ struct ubi_wl_entry; * * @peb_buf1: a buffer of PEB size used for different purposes * @peb_buf2: another buffer of PEB size used for different purposes - * @buf_mutex: proptects @peb_buf1 and @peb_buf2 + * @buf_mutex: protects @peb_buf1 and @peb_buf2 * @ckvol_mutex: serializes static volume checking when opening - * @mult_mutex: serializes operations on multiple volumes, like re-nameing + * @mult_mutex: serializes operations on multiple volumes, like re-naming * @dbg_peb_buf: buffer of PEB size used for debugging - * @dbg_buf_mutex: proptects @dbg_peb_buf + * @dbg_buf_mutex: protects @dbg_peb_buf */ struct ubi_device { struct cdev cdev; @@ -394,16 +402,13 @@ struct ubi_device { struct rb_root used; struct rb_root free; struct rb_root scrub; - struct { - struct rb_root pnum; - struct rb_root aec; - } prot; + struct list_head pq[UBI_PROT_QUEUE_LEN]; + int pq_head; spinlock_t wl_lock; struct mutex move_mutex; struct rw_semaphore work_sem; int wl_scheduled; struct ubi_wl_entry **lookuptbl; - unsigned long long abs_ec; struct ubi_wl_entry *move_from; struct ubi_wl_entry *move_to; int move_to_put; diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index 0279bf9dc72..14901cb82c1 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -22,7 +22,7 @@ * UBI wear-leveling sub-system. * * This sub-system is responsible for wear-leveling. It works in terms of - * physical* eraseblocks and erase counters and knows nothing about logical + * physical eraseblocks and erase counters and knows nothing about logical * eraseblocks, volumes, etc. From this sub-system's perspective all physical * eraseblocks are of two types - used and free. Used physical eraseblocks are * those that were "get" by the 'ubi_wl_get_peb()' function, and free physical @@ -55,8 +55,39 @@ * * As it was said, for the UBI sub-system all physical eraseblocks are either * "free" or "used". Free eraseblock are kept in the @wl->free RB-tree, while - * used eraseblocks are kept in a set of different RB-trees: @wl->used, - * @wl->prot.pnum, @wl->prot.aec, and @wl->scrub. + * used eraseblocks are kept in @wl->used or @wl->scrub RB-trees, or + * (temporarily) in the @wl->pq queue. + * + * When the WL sub-system returns a physical eraseblock, the physical + * eraseblock is protected from being moved for some "time". For this reason, + * the physical eraseblock is not directly moved from the @wl->free tree to the + * @wl->used tree. There is a protection queue in between where this + * physical eraseblock is temporarily stored (@wl->pq). + * + * All this protection stuff is needed because: + * o we don't want to move physical eraseblocks just after we have given them + * to the user; instead, we first want to let users fill them up with data; + * + * o there is a chance that the user will put the physical eraseblock very + * soon, so it makes sense not to move it for some time, but wait; this is + * especially important in case of "short term" physical eraseblocks. + * + * Physical eraseblocks stay protected only for limited time. But the "time" is + * measured in erase cycles in this case. This is implemented with help of the + * protection queue. Eraseblocks are put to the tail of this queue when they + * are returned by the 'ubi_wl_get_peb()', and eraseblocks are removed from the + * head of the queue on each erase operation (for any eraseblock). So the + * length of the queue defines how may (global) erase cycles PEBs are protected. + * + * To put it differently, each physical eraseblock has 2 main states: free and + * used. The former state corresponds to the @wl->free tree. The latter state + * is split up on several sub-states: + * o the WL movement is allowed (@wl->used tree); + * o the WL movement is temporarily prohibited (@wl->pq queue); + * o scrubbing is needed (@wl->scrub tree). + * + * Depending on the sub-state, wear-leveling entries of the used physical + * eraseblocks may be kept in one of those structures. * * Note, in this implementation, we keep a small in-RAM object for each physical * eraseblock. This is surely not a scalable solution. But it appears to be good @@ -70,9 +101,6 @@ * target PEB, we pick a PEB with the highest EC if our PEB is "old" and we * pick target PEB with an average EC if our PEB is not very "old". This is a * room for future re-works of the WL sub-system. - * - * Note: the stuff with protection trees looks too complex and is difficult to - * understand. Should be fixed. */ #include @@ -84,14 +112,6 @@ /* Number of physical eraseblocks reserved for wear-leveling purposes */ #define WL_RESERVED_PEBS 1 -/* - * How many erase cycles are short term, unknown, and long term physical - * eraseblocks protected. - */ -#define ST_PROTECTION 16 -#define U_PROTECTION 10 -#define LT_PROTECTION 4 - /* * Maximum difference between two erase counters. If this threshold is * exceeded, the WL sub-system starts moving data from used physical @@ -119,65 +139,10 @@ */ #define WL_MAX_FAILURES 32 -/** - * struct ubi_wl_prot_entry - PEB protection entry. - * @rb_pnum: link in the @wl->prot.pnum RB-tree - * @rb_aec: link in the @wl->prot.aec RB-tree - * @abs_ec: the absolute erase counter value when the protection ends - * @e: the wear-leveling entry of the physical eraseblock under protection - * - * When the WL sub-system returns a physical eraseblock, the physical - * eraseblock is protected from being moved for some "time". For this reason, - * the physical eraseblock is not directly moved from the @wl->free tree to the - * @wl->used tree. There is one more tree in between where this physical - * eraseblock is temporarily stored (@wl->prot). - * - * All this protection stuff is needed because: - * o we don't want to move physical eraseblocks just after we have given them - * to the user; instead, we first want to let users fill them up with data; - * - * o there is a chance that the user will put the physical eraseblock very - * soon, so it makes sense not to move it for some time, but wait; this is - * especially important in case of "short term" physical eraseblocks. - * - * Physical eraseblocks stay protected only for limited time. But the "time" is - * measured in erase cycles in this case. This is implemented with help of the - * absolute erase counter (@wl->abs_ec). When it reaches certain value, the - * physical eraseblocks are moved from the protection trees (@wl->prot.*) to - * the @wl->used tree. - * - * Protected physical eraseblocks are searched by physical eraseblock number - * (when they are put) and by the absolute erase counter (to check if it is - * time to move them to the @wl->used tree). So there are actually 2 RB-trees - * storing the protected physical eraseblocks: @wl->prot.pnum and - * @wl->prot.aec. They are referred to as the "protection" trees. The - * first one is indexed by the physical eraseblock number. The second one is - * indexed by the absolute erase counter. Both trees store - * &struct ubi_wl_prot_entry objects. - * - * Each physical eraseblock has 2 main states: free and used. The former state - * corresponds to the @wl->free tree. The latter state is split up on several - * sub-states: - * o the WL movement is allowed (@wl->used tree); - * o the WL movement is temporarily prohibited (@wl->prot.pnum and - * @wl->prot.aec trees); - * o scrubbing is needed (@wl->scrub tree). - * - * Depending on the sub-state, wear-leveling entries of the used physical - * eraseblocks may be kept in one of those trees. - */ -struct ubi_wl_prot_entry { - struct rb_node rb_pnum; - struct rb_node rb_aec; - unsigned long long abs_ec; - struct ubi_wl_entry *e; -}; - /** * struct ubi_work - UBI work description data structure. * @list: a link in the list of pending works * @func: worker function - * @priv: private data of the worker function * @e: physical eraseblock to erase * @torture: if the physical eraseblock has to be tortured * @@ -198,9 +163,11 @@ struct ubi_work { static int paranoid_check_ec(struct ubi_device *ubi, int pnum, int ec); static int paranoid_check_in_wl_tree(struct ubi_wl_entry *e, struct rb_root *root); +static int paranoid_check_in_pq(struct ubi_device *ubi, struct ubi_wl_entry *e); #else #define paranoid_check_ec(ubi, pnum, ec) 0 #define paranoid_check_in_wl_tree(e, root) +#define paranoid_check_in_pq(ubi, e) 0 #endif /** @@ -355,49 +322,24 @@ static int in_wl_tree(struct ubi_wl_entry *e, struct rb_root *root) } /** - * prot_tree_add - add physical eraseblock to protection trees. + * prot_queue_add - add physical eraseblock to the protection queue. * @ubi: UBI device description object * @e: the physical eraseblock to add - * @pe: protection entry object to use - * @ec: for how many erase operations this PEB should be protected * - * @wl->lock has to be locked. + * This function adds @e to the tail of the protection queue @ubi->pq, where + * @e will stay for %UBI_PROT_QUEUE_LEN erase operations and will be + * temporarily protected from the wear-leveling worker. Note, @wl->lock has to + * be locked. */ -static void prot_tree_add(struct ubi_device *ubi, struct ubi_wl_entry *e, - struct ubi_wl_prot_entry *pe, int ec) +static void prot_queue_add(struct ubi_device *ubi, struct ubi_wl_entry *e) { - struct rb_node **p, *parent = NULL; - struct ubi_wl_prot_entry *pe1; + int pq_tail = ubi->pq_head - 1; - pe->e = e; - pe->abs_ec = ubi->abs_ec + ec; - - p = &ubi->prot.pnum.rb_node; - while (*p) { - parent = *p; - pe1 = rb_entry(parent, struct ubi_wl_prot_entry, rb_pnum); - - if (e->pnum < pe1->e->pnum) - p = &(*p)->rb_left; - else - p = &(*p)->rb_right; - } - rb_link_node(&pe->rb_pnum, parent, p); - rb_insert_color(&pe->rb_pnum, &ubi->prot.pnum); - - p = &ubi->prot.aec.rb_node; - parent = NULL; - while (*p) { - parent = *p; - pe1 = rb_entry(parent, struct ubi_wl_prot_entry, rb_aec); - - if (pe->abs_ec < pe1->abs_ec) - p = &(*p)->rb_left; - else - p = &(*p)->rb_right; - } - rb_link_node(&pe->rb_aec, parent, p); - rb_insert_color(&pe->rb_aec, &ubi->prot.aec); + if (pq_tail < 0) + pq_tail = UBI_PROT_QUEUE_LEN - 1; + ubi_assert(pq_tail >= 0 && pq_tail < UBI_PROT_QUEUE_LEN); + list_add_tail(&e->u.list, &ubi->pq[pq_tail]); + dbg_wl("added PEB %d EC %d to the protection queue", e->pnum, e->ec); } /** @@ -442,17 +384,12 @@ static struct ubi_wl_entry *find_wl_entry(struct rb_root *root, int max) */ int ubi_wl_get_peb(struct ubi_device *ubi, int dtype) { - int err, protect, medium_ec; + int err, medium_ec; struct ubi_wl_entry *e, *first, *last; - struct ubi_wl_prot_entry *pe; ubi_assert(dtype == UBI_LONGTERM || dtype == UBI_SHORTTERM || dtype == UBI_UNKNOWN); - pe = kmalloc(sizeof(struct ubi_wl_prot_entry), GFP_NOFS); - if (!pe) - return -ENOMEM; - retry: spin_lock(&ubi->wl_lock); if (!ubi->free.rb_node) { @@ -460,16 +397,13 @@ retry: ubi_assert(list_empty(&ubi->works)); ubi_err("no free eraseblocks"); spin_unlock(&ubi->wl_lock); - kfree(pe); return -ENOSPC; } spin_unlock(&ubi->wl_lock); err = produce_free_peb(ubi); - if (err < 0) { - kfree(pe); + if (err < 0) return err; - } goto retry; } @@ -482,7 +416,6 @@ retry: * %WL_FREE_MAX_DIFF. */ e = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF); - protect = LT_PROTECTION; break; case UBI_UNKNOWN: /* @@ -502,7 +435,6 @@ retry: medium_ec = (first->ec + WL_FREE_MAX_DIFF)/2; e = find_wl_entry(&ubi->free, medium_ec); } - protect = U_PROTECTION; break; case UBI_SHORTTERM: /* @@ -510,63 +442,45 @@ retry: * lowest erase counter as we expect it will be erased soon. */ e = rb_entry(rb_first(&ubi->free), struct ubi_wl_entry, u.rb); - protect = ST_PROTECTION; break; default: - protect = 0; - e = NULL; BUG(); } + paranoid_check_in_wl_tree(e, &ubi->free); + /* - * Move the physical eraseblock to the protection trees where it will + * Move the physical eraseblock to the protection queue where it will * be protected from being moved for some time. */ - paranoid_check_in_wl_tree(e, &ubi->free); rb_erase(&e->u.rb, &ubi->free); - prot_tree_add(ubi, e, pe, protect); - - dbg_wl("PEB %d EC %d, protection %d", e->pnum, e->ec, protect); + dbg_wl("PEB %d EC %d", e->pnum, e->ec); + prot_queue_add(ubi, e); spin_unlock(&ubi->wl_lock); - return e->pnum; } /** - * prot_tree_del - remove a physical eraseblock from the protection trees + * prot_queue_del - remove a physical eraseblock from the protection queue. * @ubi: UBI device description object * @pnum: the physical eraseblock to remove * - * This function returns PEB @pnum from the protection trees and returns zero - * in case of success and %-ENODEV if the PEB was not found in the protection - * trees. + * This function deletes PEB @pnum from the protection queue and returns zero + * in case of success and %-ENODEV if the PEB was not found. */ -static int prot_tree_del(struct ubi_device *ubi, int pnum) +static int prot_queue_del(struct ubi_device *ubi, int pnum) { - struct rb_node *p; - struct ubi_wl_prot_entry *pe = NULL; - - p = ubi->prot.pnum.rb_node; - while (p) { - - pe = rb_entry(p, struct ubi_wl_prot_entry, rb_pnum); - - if (pnum == pe->e->pnum) - goto found; + struct ubi_wl_entry *e; - if (pnum < pe->e->pnum) - p = p->rb_left; - else - p = p->rb_right; - } + e = ubi->lookuptbl[pnum]; + if (!e) + return -ENODEV; - return -ENODEV; + if (paranoid_check_in_pq(ubi, e)) + return -ENODEV; -found: - ubi_assert(pe->e->pnum == pnum); - rb_erase(&pe->rb_aec, &ubi->prot.aec); - rb_erase(&pe->rb_pnum, &ubi->prot.pnum); - kfree(pe); + list_del(&e->u.list); + dbg_wl("deleted PEB %d from the protection queue", e->pnum); return 0; } @@ -632,47 +546,47 @@ out_free: } /** - * check_protection_over - check if it is time to stop protecting some PEBs. + * serve_prot_queue - check if it is time to stop protecting PEBs. * @ubi: UBI device description object * - * This function is called after each erase operation, when the absolute erase - * counter is incremented, to check if some physical eraseblock have not to be - * protected any longer. These physical eraseblocks are moved from the - * protection trees to the used tree. + * This function is called after each erase operation and removes PEBs from the + * tail of the protection queue. These PEBs have been protected for long enough + * and should be moved to the used tree. */ -static void check_protection_over(struct ubi_device *ubi) +static void serve_prot_queue(struct ubi_device *ubi) { - struct ubi_wl_prot_entry *pe; + struct ubi_wl_entry *e, *tmp; + int count; /* * There may be several protected physical eraseblock to remove, * process them all. */ - while (1) { - spin_lock(&ubi->wl_lock); - if (!ubi->prot.aec.rb_node) { - spin_unlock(&ubi->wl_lock); - break; - } - - pe = rb_entry(rb_first(&ubi->prot.aec), - struct ubi_wl_prot_entry, rb_aec); +repeat: + count = 0; + spin_lock(&ubi->wl_lock); + list_for_each_entry_safe(e, tmp, &ubi->pq[ubi->pq_head], u.list) { + dbg_wl("PEB %d EC %d protection over, move to used tree", + e->pnum, e->ec); - if (pe->abs_ec > ubi->abs_ec) { + list_del(&e->u.list); + wl_tree_add(e, &ubi->used); + if (count++ > 32) { + /* + * Let's be nice and avoid holding the spinlock for + * too long. + */ spin_unlock(&ubi->wl_lock); - break; + cond_resched(); + goto repeat; } - - dbg_wl("PEB %d protection over, abs_ec %llu, PEB abs_ec %llu", - pe->e->pnum, ubi->abs_ec, pe->abs_ec); - rb_erase(&pe->rb_aec, &ubi->prot.aec); - rb_erase(&pe->rb_pnum, &ubi->prot.pnum); - wl_tree_add(pe->e, &ubi->used); - spin_unlock(&ubi->wl_lock); - - kfree(pe); - cond_resched(); } + + ubi->pq_head += 1; + if (ubi->pq_head == UBI_PROT_QUEUE_LEN) + ubi->pq_head = 0; + ubi_assert(ubi->pq_head >= 0 && ubi->pq_head < UBI_PROT_QUEUE_LEN); + spin_unlock(&ubi->wl_lock); } /** @@ -680,8 +594,8 @@ static void check_protection_over(struct ubi_device *ubi) * @ubi: UBI device description object * @wrk: the work to schedule * - * This function enqueues a work defined by @wrk to the tail of the pending - * works list. + * This function adds a work defined by @wrk to the tail of the pending works + * list. */ static void schedule_ubi_work(struct ubi_device *ubi, struct ubi_work *wrk) { @@ -740,7 +654,6 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk, int cancel) { int err, scrubbing = 0, torture = 0; - struct ubi_wl_prot_entry *uninitialized_var(pe); struct ubi_wl_entry *e1, *e2; struct ubi_vid_hdr *vid_hdr; @@ -857,23 +770,17 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk, * The LEB has not been moved because the volume is being * deleted or the PEB has been put meanwhile. We should prevent * this PEB from being selected for wear-leveling movement - * again, so put it to the protection tree. + * again, so put it to the protection queue. */ dbg_wl("canceled moving PEB %d", e1->pnum); ubi_assert(err == 1); - pe = kmalloc(sizeof(struct ubi_wl_prot_entry), GFP_NOFS); - if (!pe) { - err = -ENOMEM; - goto out_error; - } - ubi_free_vid_hdr(ubi, vid_hdr); vid_hdr = NULL; spin_lock(&ubi->wl_lock); - prot_tree_add(ubi, e1, pe, U_PROTECTION); + prot_queue_add(ubi, e1); ubi_assert(!ubi->move_to_put); ubi->move_from = ubi->move_to = NULL; ubi->wl_scheduled = 0; @@ -1075,7 +982,6 @@ static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk, kfree(wl_wrk); spin_lock(&ubi->wl_lock); - ubi->abs_ec += 1; wl_tree_add(e, &ubi->free); spin_unlock(&ubi->wl_lock); @@ -1083,7 +989,7 @@ static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk, * One more erase operation has happened, take care about * protected physical eraseblocks. */ - check_protection_over(ubi); + serve_prot_queue(ubi); /* And take care about wear-leveling */ err = ensure_wear_leveling(ubi); @@ -1220,7 +1126,7 @@ retry: paranoid_check_in_wl_tree(e, &ubi->scrub); rb_erase(&e->u.rb, &ubi->scrub); } else { - err = prot_tree_del(ubi, e->pnum); + err = prot_queue_del(ubi, e->pnum); if (err) { ubi_err("PEB %d not found", pnum); ubi_ro_mode(ubi); @@ -1284,7 +1190,7 @@ retry: } else { int err; - err = prot_tree_del(ubi, e->pnum); + err = prot_queue_del(ubi, e->pnum); if (err) { ubi_err("PEB %d not found", pnum); ubi_ro_mode(ubi); @@ -1315,7 +1221,7 @@ int ubi_wl_flush(struct ubi_device *ubi) int err; /* - * Erase while the pending works queue is not empty, but not more then + * Erase while the pending works queue is not empty, but not more than * the number of currently pending works. */ dbg_wl("flush (%d pending works)", ubi->works_count); @@ -1461,15 +1367,13 @@ static void cancel_pending(struct ubi_device *ubi) */ int ubi_wl_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si) { - int err; + int err, i; struct rb_node *rb1, *rb2; struct ubi_scan_volume *sv; struct ubi_scan_leb *seb, *tmp; struct ubi_wl_entry *e; - ubi->used = ubi->free = ubi->scrub = RB_ROOT; - ubi->prot.pnum = ubi->prot.aec = RB_ROOT; spin_lock_init(&ubi->wl_lock); mutex_init(&ubi->move_mutex); init_rwsem(&ubi->work_sem); @@ -1483,6 +1387,10 @@ int ubi_wl_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si) if (!ubi->lookuptbl) return err; + for (i = 0; i < UBI_PROT_QUEUE_LEN; i++) + INIT_LIST_HEAD(&ubi->pq[i]); + ubi->pq_head = 0; + list_for_each_entry_safe(seb, tmp, &si->erase, u.list) { cond_resched(); @@ -1577,33 +1485,18 @@ out_free: } /** - * protection_trees_destroy - destroy the protection RB-trees. + * protection_queue_destroy - destroy the protection queue. * @ubi: UBI device description object */ -static void protection_trees_destroy(struct ubi_device *ubi) +static void protection_queue_destroy(struct ubi_device *ubi) { - struct rb_node *rb; - struct ubi_wl_prot_entry *pe; + int i; + struct ubi_wl_entry *e, *tmp; - rb = ubi->prot.aec.rb_node; - while (rb) { - if (rb->rb_left) - rb = rb->rb_left; - else if (rb->rb_right) - rb = rb->rb_right; - else { - pe = rb_entry(rb, struct ubi_wl_prot_entry, rb_aec); - - rb = rb_parent(rb); - if (rb) { - if (rb->rb_left == &pe->rb_aec) - rb->rb_left = NULL; - else - rb->rb_right = NULL; - } - - kmem_cache_free(ubi_wl_entry_slab, pe->e); - kfree(pe); + for (i = 0; i < UBI_PROT_QUEUE_LEN; ++i) { + list_for_each_entry_safe(e, tmp, &ubi->pq[i], u.list) { + list_del(&e->u.list); + kmem_cache_free(ubi_wl_entry_slab, e); } } } @@ -1616,7 +1509,7 @@ void ubi_wl_close(struct ubi_device *ubi) { dbg_wl("close the WL sub-system"); cancel_pending(ubi); - protection_trees_destroy(ubi); + protection_queue_destroy(ubi); tree_destroy(&ubi->used); tree_destroy(&ubi->free); tree_destroy(&ubi->scrub); @@ -1686,4 +1579,27 @@ static int paranoid_check_in_wl_tree(struct ubi_wl_entry *e, return 1; } +/** + * paranoid_check_in_pq - check if wear-leveling entry is in the protection + * queue. + * @ubi: UBI device description object + * @e: the wear-leveling entry to check + * + * This function returns zero if @e is in @ubi->pq and %1 if it is not. + */ +static int paranoid_check_in_pq(struct ubi_device *ubi, struct ubi_wl_entry *e) +{ + struct ubi_wl_entry *p; + int i; + + for (i = 0; i < UBI_PROT_QUEUE_LEN; ++i) + list_for_each_entry(p, &ubi->pq[i], u.list) + if (p == e) + return 0; + + ubi_err("paranoid check failed for PEB %d, EC %d, Protect queue", + e->pnum, e->ec); + ubi_dbg_dump_stack(); + return 1; +} #endif /* CONFIG_MTD_UBI_DEBUG_PARANOID */ -- cgit v1.2.3-70-g09d2 From cb96cf1ad641334ca605cdf25841ac020d6ae01c Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 11 Nov 2008 15:15:39 +0100 Subject: [ARM] MX3: add NAND support Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/devices.c | 19 +++++++++++++++++++ arch/arm/mach-mx3/devices.h | 1 + drivers/mtd/nand/Kconfig | 2 +- 3 files changed, 21 insertions(+), 1 deletion(-) (limited to 'drivers/mtd') diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index 12b3e3c0046..3e61ff4646f 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -160,3 +160,22 @@ struct platform_device mxc_w1_master_device = { .num_resources = ARRAY_SIZE(mxc_w1_master_resources), .resource = mxc_w1_master_resources, }; + +static struct resource mxc_nand_resources[] = { + { + .start = NFC_BASE_ADDR, + .end = NFC_BASE_ADDR + 0xfff, + .flags = IORESOURCE_MEM + }, { + .start = MXC_INT_NANDFC, + .end = MXC_INT_NANDFC, + .flags = IORESOURCE_IRQ + }, +}; + +struct platform_device mxc_nand_device = { + .name = "mxc_nand", + .id = 0, + .num_resources = ARRAY_SIZE(mxc_nand_resources), + .resource = mxc_nand_resources, +}; diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h index cb1459c7c96..9949ef4e069 100644 --- a/arch/arm/mach-mx3/devices.h +++ b/arch/arm/mach-mx3/devices.h @@ -5,3 +5,4 @@ extern struct platform_device mxc_uart_device2; extern struct platform_device mxc_uart_device3; extern struct platform_device mxc_uart_device4; extern struct platform_device mxc_w1_master_device; +extern struct platform_device mxc_nand_device; diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 1c2e9450d66..f8ae0400c49 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -408,7 +408,7 @@ config MTD_NAND_FSL_UPM config MTD_NAND_MXC tristate "MXC NAND support" - depends on ARCH_MX2 + depends on ARCH_MX2 || ARCH_MX3 help This enables the driver for the NAND flash controller on the MXC processors. -- cgit v1.2.3-70-g09d2 From f2863c54f30cccb50661697a6e4bdcd0ad0b0a6c Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Sun, 28 Dec 2008 12:20:51 +0200 Subject: UBI: fix checkpatch.pl warnings Just minor indentation and "over 80 characters" fixes. Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/cdev.c | 3 ++- drivers/mtd/ubi/debug.h | 10 +++++----- drivers/mtd/ubi/io.c | 2 +- 3 files changed, 8 insertions(+), 7 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index b30a0b83d7f..98cf31ed081 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -721,7 +721,8 @@ static int rename_volumes(struct ubi_device *ubi, * It seems we need to remove volume with name @re->new_name, * if it exists. */ - desc = ubi_open_volume_nm(ubi->ubi_num, re->new_name, UBI_EXCLUSIVE); + desc = ubi_open_volume_nm(ubi->ubi_num, re->new_name, + UBI_EXCLUSIVE); if (IS_ERR(desc)) { err = PTR_ERR(desc); if (err == -ENODEV) diff --git a/drivers/mtd/ubi/debug.h b/drivers/mtd/ubi/debug.h index 78e914d23ec..13777e5beac 100644 --- a/drivers/mtd/ubi/debug.h +++ b/drivers/mtd/ubi/debug.h @@ -27,11 +27,11 @@ #define dbg_err(fmt, ...) ubi_err(fmt, ##__VA_ARGS__) #define ubi_assert(expr) do { \ - if (unlikely(!(expr))) { \ - printk(KERN_CRIT "UBI assert failed in %s at %u (pid %d)\n", \ - __func__, __LINE__, current->pid); \ - ubi_dbg_dump_stack(); \ - } \ + if (unlikely(!(expr))) { \ + printk(KERN_CRIT "UBI assert failed in %s at %u (pid %d)\n", \ + __func__, __LINE__, current->pid); \ + ubi_dbg_dump_stack(); \ + } \ } while (0) #define dbg_msg(fmt, ...) \ diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c index f60f700256f..a74118c0574 100644 --- a/drivers/mtd/ubi/io.c +++ b/drivers/mtd/ubi/io.c @@ -1034,7 +1034,7 @@ int ubi_io_write_vid_hdr(struct ubi_device *ubi, int pnum, err = paranoid_check_peb_ec_hdr(ubi, pnum); if (err) - return err > 0 ? -EINVAL: err; + return err > 0 ? -EINVAL : err; vid_hdr->magic = cpu_to_be32(UBI_VID_HDR_MAGIC); vid_hdr->version = UBI_VERSION; -- cgit v1.2.3-70-g09d2