From 646cdb32831eebe8c2f742c293d0d266326854d9 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Tue, 26 May 2009 12:35:25 +0000 Subject: 3c50x: convert printk() to pr_() Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller --- drivers/net/3c505.c | 215 +++++++++++++++++++++++++++------------------------- 1 file changed, 111 insertions(+), 104 deletions(-) (limited to 'drivers/net/3c505.c') diff --git a/drivers/net/3c505.c b/drivers/net/3c505.c index 2de1c9cd7bd..b28499459cd 100644 --- a/drivers/net/3c505.c +++ b/drivers/net/3c505.c @@ -126,26 +126,25 @@ * *********************************************************/ -static const char filename[] = __FILE__; +#define filename __FILE__ -static const char timeout_msg[] = "*** timeout at %s:%s (line %d) ***\n"; +#define timeout_msg "*** timeout at %s:%s (line %d) ***\n" #define TIMEOUT_MSG(lineno) \ - printk(timeout_msg, filename,__func__,(lineno)) + pr_notice(timeout_msg, filename, __func__, (lineno)) -static const char invalid_pcb_msg[] = -"*** invalid pcb length %d at %s:%s (line %d) ***\n"; +#define invalid_pcb_msg "*** invalid pcb length %d at %s:%s (line %d) ***\n" #define INVALID_PCB_MSG(len) \ - printk(invalid_pcb_msg, (len),filename,__func__,__LINE__) + pr_notice(invalid_pcb_msg, (len), filename, __func__, __LINE__) -static char search_msg[] __initdata = KERN_INFO "%s: Looking for 3c505 adapter at address %#x..."; +#define search_msg "%s: Looking for 3c505 adapter at address %#x..." -static char stilllooking_msg[] __initdata = "still looking..."; +#define stilllooking_msg "still looking..." -static char found_msg[] __initdata = "found.\n"; +#define found_msg "found.\n" -static char notfound_msg[] __initdata = "not found (reason = %d)\n"; +#define notfound_msg "not found (reason = %d)\n" -static char couldnot_msg[] __initdata = KERN_INFO "%s: 3c505 not found\n"; +#define couldnot_msg "%s: 3c505 not found\n" /********************************************************* * @@ -284,7 +283,7 @@ static inline void adapter_reset(struct net_device *dev) outb_control(orig_hcr, dev); if (!start_receive(dev, &adapter->tx_pcb)) - printk(KERN_ERR "%s: start receive command failed \n", dev->name); + pr_err("%s: start receive command failed\n", dev->name); } /* Check to make sure that a DMA transfer hasn't timed out. This should @@ -296,7 +295,9 @@ static inline void check_3c505_dma(struct net_device *dev) elp_device *adapter = netdev_priv(dev); if (adapter->dmaing && time_after(jiffies, adapter->current_dma.start_time + 10)) { unsigned long flags, f; - printk(KERN_ERR "%s: DMA %s timed out, %d bytes left\n", dev->name, adapter->current_dma.direction ? "download" : "upload", get_dma_residue(dev->dma)); + pr_err("%s: DMA %s timed out, %d bytes left\n", dev->name, + adapter->current_dma.direction ? "download" : "upload", + get_dma_residue(dev->dma)); spin_lock_irqsave(&adapter->lock, flags); adapter->dmaing = 0; adapter->busy = 0; @@ -321,7 +322,7 @@ static inline bool send_pcb_slow(unsigned int base_addr, unsigned char byte) if (inb_status(base_addr) & HCRE) return false; } - printk(KERN_WARNING "3c505: send_pcb_slow timed out\n"); + pr_warning("3c505: send_pcb_slow timed out\n"); return true; } @@ -333,7 +334,7 @@ static inline bool send_pcb_fast(unsigned int base_addr, unsigned char byte) if (inb_status(base_addr) & HCRE) return false; } - printk(KERN_WARNING "3c505: send_pcb_fast timed out\n"); + pr_warning("3c505: send_pcb_fast timed out\n"); return true; } @@ -386,7 +387,7 @@ static bool send_pcb(struct net_device *dev, pcb_struct * pcb) /* Avoid contention */ if (test_and_set_bit(1, &adapter->send_pcb_semaphore)) { if (elp_debug >= 3) { - printk(KERN_DEBUG "%s: send_pcb entered while threaded\n", dev->name); + pr_debug("%s: send_pcb entered while threaded\n", dev->name); } return false; } @@ -424,14 +425,15 @@ static bool send_pcb(struct net_device *dev, pcb_struct * pcb) case ASF_PCB_NAK: #ifdef ELP_DEBUG - printk(KERN_DEBUG "%s: send_pcb got NAK\n", dev->name); + pr_debug("%s: send_pcb got NAK\n", dev->name); #endif goto abort; } } if (elp_debug >= 1) - printk(KERN_DEBUG "%s: timeout waiting for PCB acknowledge (status %02x)\n", dev->name, inb_status(dev->base_addr)); + pr_debug("%s: timeout waiting for PCB acknowledge (status %02x)\n", + dev->name, inb_status(dev->base_addr)); goto abort; sti_abort: @@ -481,7 +483,7 @@ static bool receive_pcb(struct net_device *dev, pcb_struct * pcb) while (((stat = get_status(dev->base_addr)) & ACRF) == 0 && time_before(jiffies, timeout)); if (time_after_eq(jiffies, timeout)) { TIMEOUT_MSG(__LINE__); - printk(KERN_INFO "%s: status %02x\n", dev->name, stat); + pr_info("%s: status %02x\n", dev->name, stat); return false; } pcb->length = inb_command(dev->base_addr); @@ -518,7 +520,7 @@ static bool receive_pcb(struct net_device *dev, pcb_struct * pcb) /* safety check total length vs data length */ if (total_length != (pcb->length + 2)) { if (elp_debug >= 2) - printk(KERN_WARNING "%s: mangled PCB received\n", dev->name); + pr_warning("%s: mangled PCB received\n", dev->name); set_hsf(dev, HSF_PCB_NAK); return false; } @@ -527,7 +529,7 @@ static bool receive_pcb(struct net_device *dev, pcb_struct * pcb) if (test_and_set_bit(0, (void *) &adapter->busy)) { if (backlog_next(adapter->rx_backlog.in) == adapter->rx_backlog.out) { set_hsf(dev, HSF_PCB_NAK); - printk(KERN_WARNING "%s: PCB rejected, transfer in progress and backlog full\n", dev->name); + pr_warning("%s: PCB rejected, transfer in progress and backlog full\n", dev->name); pcb->command = 0; return true; } else { @@ -552,7 +554,7 @@ static bool start_receive(struct net_device *dev, pcb_struct * tx_pcb) elp_device *adapter = netdev_priv(dev); if (elp_debug >= 3) - printk(KERN_DEBUG "%s: restarting receiver\n", dev->name); + pr_debug("%s: restarting receiver\n", dev->name); tx_pcb->command = CMD_RECEIVE_PACKET; tx_pcb->length = sizeof(struct Rcv_pkt); tx_pcb->data.rcv_pkt.buf_seg @@ -586,7 +588,7 @@ static void receive_packet(struct net_device *dev, int len) skb = dev_alloc_skb(rlen + 2); if (!skb) { - printk(KERN_WARNING "%s: memory squeeze, dropping packet\n", dev->name); + pr_warning("%s: memory squeeze, dropping packet\n", dev->name); target = adapter->dma_buffer; adapter->current_dma.target = NULL; /* FIXME: stats */ @@ -604,7 +606,8 @@ static void receive_packet(struct net_device *dev, int len) /* if this happens, we die */ if (test_and_set_bit(0, (void *) &adapter->dmaing)) - printk(KERN_ERR "%s: rx blocked, DMA in progress, dir %d\n", dev->name, adapter->current_dma.direction); + pr_err("%s: rx blocked, DMA in progress, dir %d\n", + dev->name, adapter->current_dma.direction); adapter->current_dma.direction = 0; adapter->current_dma.length = rlen; @@ -623,14 +626,14 @@ static void receive_packet(struct net_device *dev, int len) release_dma_lock(flags); if (elp_debug >= 3) { - printk(KERN_DEBUG "%s: rx DMA transfer started\n", dev->name); + pr_debug("%s: rx DMA transfer started\n", dev->name); } if (adapter->rx_active) adapter->rx_active--; if (!adapter->busy) - printk(KERN_WARNING "%s: receive_packet called, busy not set.\n", dev->name); + pr_warning("%s: receive_packet called, busy not set.\n", dev->name); } /****************************************************** @@ -655,12 +658,13 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id) * has a DMA transfer finished? */ if (inb_status(dev->base_addr) & DONE) { - if (!adapter->dmaing) { - printk(KERN_WARNING "%s: phantom DMA completed\n", dev->name); - } - if (elp_debug >= 3) { - printk(KERN_DEBUG "%s: %s DMA complete, status %02x\n", dev->name, adapter->current_dma.direction ? "tx" : "rx", inb_status(dev->base_addr)); - } + if (!adapter->dmaing) + pr_warning("%s: phantom DMA completed\n", dev->name); + + if (elp_debug >= 3) + pr_debug("%s: %s DMA complete, status %02x\n", dev->name, + adapter->current_dma.direction ? "tx" : "rx", + inb_status(dev->base_addr)); outb_control(adapter->hcr_val & ~(DMAE | TCEN | DIR), dev); if (adapter->current_dma.direction) { @@ -682,7 +686,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id) int t = adapter->rx_backlog.length[adapter->rx_backlog.out]; adapter->rx_backlog.out = backlog_next(adapter->rx_backlog.out); if (elp_debug >= 2) - printk(KERN_DEBUG "%s: receiving backlogged packet (%d)\n", dev->name, t); + pr_debug("%s: receiving backlogged packet (%d)\n", dev->name, t); receive_packet(dev, t); } else { adapter->busy = 0; @@ -713,21 +717,23 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id) len = adapter->irx_pcb.data.rcv_resp.pkt_len; dlen = adapter->irx_pcb.data.rcv_resp.buf_len; if (adapter->irx_pcb.data.rcv_resp.timeout != 0) { - printk(KERN_ERR "%s: interrupt - packet not received correctly\n", dev->name); + pr_err("%s: interrupt - packet not received correctly\n", dev->name); } else { if (elp_debug >= 3) { - printk(KERN_DEBUG "%s: interrupt - packet received of length %i (%i)\n", dev->name, len, dlen); + pr_debug("%s: interrupt - packet received of length %i (%i)\n", + dev->name, len, dlen); } if (adapter->irx_pcb.command == 0xff) { if (elp_debug >= 2) - printk(KERN_DEBUG "%s: adding packet to backlog (len = %d)\n", dev->name, dlen); + pr_debug("%s: adding packet to backlog (len = %d)\n", + dev->name, dlen); adapter->rx_backlog.length[adapter->rx_backlog.in] = dlen; adapter->rx_backlog.in = backlog_next(adapter->rx_backlog.in); } else { receive_packet(dev, dlen); } if (elp_debug >= 3) - printk(KERN_DEBUG "%s: packet received\n", dev->name); + pr_debug("%s: packet received\n", dev->name); } break; @@ -737,7 +743,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id) case CMD_CONFIGURE_82586_RESPONSE: adapter->got[CMD_CONFIGURE_82586] = 1; if (elp_debug >= 3) - printk(KERN_DEBUG "%s: interrupt - configure response received\n", dev->name); + pr_debug("%s: interrupt - configure response received\n", dev->name); break; /* @@ -746,7 +752,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id) case CMD_CONFIGURE_ADAPTER_RESPONSE: adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] = 1; if (elp_debug >= 3) - printk(KERN_DEBUG "%s: Adapter memory configuration %s.\n", dev->name, + pr_debug("%s: Adapter memory configuration %s.\n", dev->name, adapter->irx_pcb.data.failed ? "failed" : "succeeded"); break; @@ -756,7 +762,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id) case CMD_LOAD_MULTICAST_RESPONSE: adapter->got[CMD_LOAD_MULTICAST_LIST] = 1; if (elp_debug >= 3) - printk(KERN_DEBUG "%s: Multicast address list loading %s.\n", dev->name, + pr_debug("%s: Multicast address list loading %s.\n", dev->name, adapter->irx_pcb.data.failed ? "failed" : "succeeded"); break; @@ -766,7 +772,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id) case CMD_SET_ADDRESS_RESPONSE: adapter->got[CMD_SET_STATION_ADDRESS] = 1; if (elp_debug >= 3) - printk(KERN_DEBUG "%s: Ethernet address setting %s.\n", dev->name, + pr_debug("%s: Ethernet address setting %s.\n", dev->name, adapter->irx_pcb.data.failed ? "failed" : "succeeded"); break; @@ -783,7 +789,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id) dev->stats.rx_over_errors += adapter->irx_pcb.data.netstat.err_res; adapter->got[CMD_NETWORK_STATISTICS] = 1; if (elp_debug >= 3) - printk(KERN_DEBUG "%s: interrupt - statistics response received\n", dev->name); + pr_debug("%s: interrupt - statistics response received\n", dev->name); break; /* @@ -791,17 +797,17 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id) */ case CMD_TRANSMIT_PACKET_COMPLETE: if (elp_debug >= 3) - printk(KERN_DEBUG "%s: interrupt - packet sent\n", dev->name); + pr_debug("%s: interrupt - packet sent\n", dev->name); if (!netif_running(dev)) break; switch (adapter->irx_pcb.data.xmit_resp.c_stat) { case 0xffff: dev->stats.tx_aborted_errors++; - printk(KERN_INFO "%s: transmit timed out, network cable problem?\n", dev->name); + pr_info("%s: transmit timed out, network cable problem?\n", dev->name); break; case 0xfffe: dev->stats.tx_fifo_errors++; - printk(KERN_INFO "%s: transmit timed out, FIFO underrun\n", dev->name); + pr_info("%s: transmit timed out, FIFO underrun\n", dev->name); break; } netif_wake_queue(dev); @@ -811,11 +817,12 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id) * some unknown PCB */ default: - printk(KERN_DEBUG "%s: unknown PCB received - %2.2x\n", dev->name, adapter->irx_pcb.command); + pr_debug("%s: unknown PCB received - %2.2x\n", + dev->name, adapter->irx_pcb.command); break; } } else { - printk(KERN_WARNING "%s: failed to read PCB on interrupt\n", dev->name); + pr_warning("%s: failed to read PCB on interrupt\n", dev->name); adapter_reset(dev); } } @@ -844,13 +851,13 @@ static int elp_open(struct net_device *dev) int retval; if (elp_debug >= 3) - printk(KERN_DEBUG "%s: request to open device\n", dev->name); + pr_debug("%s: request to open device\n", dev->name); /* * make sure we actually found the device */ if (adapter == NULL) { - printk(KERN_ERR "%s: Opening a non-existent physical device\n", dev->name); + pr_err("%s: Opening a non-existent physical device\n", dev->name); return -EAGAIN; } /* @@ -880,17 +887,17 @@ static int elp_open(struct net_device *dev) * install our interrupt service routine */ if ((retval = request_irq(dev->irq, &elp_interrupt, 0, dev->name, dev))) { - printk(KERN_ERR "%s: could not allocate IRQ%d\n", dev->name, dev->irq); + pr_err("%s: could not allocate IRQ%d\n", dev->name, dev->irq); return retval; } if ((retval = request_dma(dev->dma, dev->name))) { free_irq(dev->irq, dev); - printk(KERN_ERR "%s: could not allocate DMA%d channel\n", dev->name, dev->dma); + pr_err("%s: could not allocate DMA%d channel\n", dev->name, dev->dma); return retval; } adapter->dma_buffer = (void *) dma_mem_alloc(DMA_BUFFER_SIZE); if (!adapter->dma_buffer) { - printk(KERN_ERR "%s: could not allocate DMA buffer\n", dev->name); + pr_err("%s: could not allocate DMA buffer\n", dev->name); free_dma(dev->dma); free_irq(dev->irq, dev); return -ENOMEM; @@ -906,7 +913,7 @@ static int elp_open(struct net_device *dev) * configure adapter memory: we need 10 multicast addresses, default==0 */ if (elp_debug >= 3) - printk(KERN_DEBUG "%s: sending 3c505 memory configuration command\n", dev->name); + pr_debug("%s: sending 3c505 memory configuration command\n", dev->name); adapter->tx_pcb.command = CMD_CONFIGURE_ADAPTER_MEMORY; adapter->tx_pcb.data.memconf.cmd_q = 10; adapter->tx_pcb.data.memconf.rcv_q = 20; @@ -917,7 +924,7 @@ static int elp_open(struct net_device *dev) adapter->tx_pcb.length = sizeof(struct Memconf); adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] = 0; if (!send_pcb(dev, &adapter->tx_pcb)) - printk(KERN_ERR "%s: couldn't send memory configuration command\n", dev->name); + pr_err("%s: couldn't send memory configuration command\n", dev->name); else { unsigned long timeout = jiffies + TIMEOUT; while (adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] == 0 && time_before(jiffies, timeout)); @@ -930,13 +937,13 @@ static int elp_open(struct net_device *dev) * configure adapter to receive broadcast messages and wait for response */ if (elp_debug >= 3) - printk(KERN_DEBUG "%s: sending 82586 configure command\n", dev->name); + pr_debug("%s: sending 82586 configure command\n", dev->name); adapter->tx_pcb.command = CMD_CONFIGURE_82586; adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_BROAD; adapter->tx_pcb.length = 2; adapter->got[CMD_CONFIGURE_82586] = 0; if (!send_pcb(dev, &adapter->tx_pcb)) - printk(KERN_ERR "%s: couldn't send 82586 configure command\n", dev->name); + pr_err("%s: couldn't send 82586 configure command\n", dev->name); else { unsigned long timeout = jiffies + TIMEOUT; while (adapter->got[CMD_CONFIGURE_82586] == 0 && time_before(jiffies, timeout)); @@ -952,7 +959,7 @@ static int elp_open(struct net_device *dev) */ prime_rx(dev); if (elp_debug >= 3) - printk(KERN_DEBUG "%s: %d receive PCBs active\n", dev->name, adapter->rx_active); + pr_debug("%s: %d receive PCBs active\n", dev->name, adapter->rx_active); /* * device is now officially open! @@ -982,7 +989,7 @@ static bool send_packet(struct net_device *dev, struct sk_buff *skb) if (test_and_set_bit(0, (void *) &adapter->busy)) { if (elp_debug >= 2) - printk(KERN_DEBUG "%s: transmit blocked\n", dev->name); + pr_debug("%s: transmit blocked\n", dev->name); return false; } @@ -1004,7 +1011,7 @@ static bool send_packet(struct net_device *dev, struct sk_buff *skb) } /* if this happens, we die */ if (test_and_set_bit(0, (void *) &adapter->dmaing)) - printk(KERN_DEBUG "%s: tx: DMA %d in progress\n", dev->name, adapter->current_dma.direction); + pr_debug("%s: tx: DMA %d in progress\n", dev->name, adapter->current_dma.direction); adapter->current_dma.direction = 1; adapter->current_dma.start_time = jiffies; @@ -1030,7 +1037,7 @@ static bool send_packet(struct net_device *dev, struct sk_buff *skb) release_dma_lock(flags); if (elp_debug >= 3) - printk(KERN_DEBUG "%s: DMA transfer started\n", dev->name); + pr_debug("%s: DMA transfer started\n", dev->name); return true; } @@ -1044,9 +1051,10 @@ static void elp_timeout(struct net_device *dev) int stat; stat = inb_status(dev->base_addr); - printk(KERN_WARNING "%s: transmit timed out, lost %s?\n", dev->name, (stat & ACRF) ? "interrupt" : "command"); + pr_warning("%s: transmit timed out, lost %s?\n", dev->name, + (stat & ACRF) ? "interrupt" : "command"); if (elp_debug >= 1) - printk(KERN_DEBUG "%s: status %#02x\n", dev->name, stat); + pr_debug("%s: status %#02x\n", dev->name, stat); dev->trans_start = jiffies; dev->stats.tx_dropped++; netif_wake_queue(dev); @@ -1068,7 +1076,7 @@ static int elp_start_xmit(struct sk_buff *skb, struct net_device *dev) check_3c505_dma(dev); if (elp_debug >= 3) - printk(KERN_DEBUG "%s: request to send packet of length %d\n", dev->name, (int) skb->len); + pr_debug("%s: request to send packet of length %d\n", dev->name, (int) skb->len); netif_stop_queue(dev); @@ -1077,13 +1085,13 @@ static int elp_start_xmit(struct sk_buff *skb, struct net_device *dev) */ if (!send_packet(dev, skb)) { if (elp_debug >= 2) { - printk(KERN_DEBUG "%s: failed to transmit packet\n", dev->name); + pr_debug("%s: failed to transmit packet\n", dev->name); } spin_unlock_irqrestore(&adapter->lock, flags); return 1; } if (elp_debug >= 3) - printk(KERN_DEBUG "%s: packet of length %d sent\n", dev->name, (int) skb->len); + pr_debug("%s: packet of length %d sent\n", dev->name, (int) skb->len); /* * start the transmit timeout @@ -1107,7 +1115,7 @@ static struct net_device_stats *elp_get_stats(struct net_device *dev) elp_device *adapter = netdev_priv(dev); if (elp_debug >= 3) - printk(KERN_DEBUG "%s: request for stats\n", dev->name); + pr_debug("%s: request for stats\n", dev->name); /* If the device is closed, just return the latest stats we have, - we cannot ask from the adapter without interrupts */ @@ -1119,7 +1127,7 @@ static struct net_device_stats *elp_get_stats(struct net_device *dev) adapter->tx_pcb.length = 0; adapter->got[CMD_NETWORK_STATISTICS] = 0; if (!send_pcb(dev, &adapter->tx_pcb)) - printk(KERN_ERR "%s: couldn't send get statistics command\n", dev->name); + pr_err("%s: couldn't send get statistics command\n", dev->name); else { unsigned long timeout = jiffies + TIMEOUT; while (adapter->got[CMD_NETWORK_STATISTICS] == 0 && time_before(jiffies, timeout)); @@ -1169,7 +1177,7 @@ static int elp_close(struct net_device *dev) elp_device *adapter = netdev_priv(dev); if (elp_debug >= 3) - printk(KERN_DEBUG "%s: request to close device\n", dev->name); + pr_debug("%s: request to close device\n", dev->name); netif_stop_queue(dev); @@ -1213,7 +1221,7 @@ static void elp_set_mc_list(struct net_device *dev) unsigned long flags; if (elp_debug >= 3) - printk(KERN_DEBUG "%s: request to set multicast list\n", dev->name); + pr_debug("%s: request to set multicast list\n", dev->name); spin_lock_irqsave(&adapter->lock, flags); @@ -1228,7 +1236,7 @@ static void elp_set_mc_list(struct net_device *dev) } adapter->got[CMD_LOAD_MULTICAST_LIST] = 0; if (!send_pcb(dev, &adapter->tx_pcb)) - printk(KERN_ERR "%s: couldn't send set_multicast command\n", dev->name); + pr_err("%s: couldn't send set_multicast command\n", dev->name); else { unsigned long timeout = jiffies + TIMEOUT; while (adapter->got[CMD_LOAD_MULTICAST_LIST] == 0 && time_before(jiffies, timeout)); @@ -1247,14 +1255,14 @@ static void elp_set_mc_list(struct net_device *dev) * and wait for response */ if (elp_debug >= 3) - printk(KERN_DEBUG "%s: sending 82586 configure command\n", dev->name); + pr_debug("%s: sending 82586 configure command\n", dev->name); adapter->tx_pcb.command = CMD_CONFIGURE_82586; adapter->tx_pcb.length = 2; adapter->got[CMD_CONFIGURE_82586] = 0; if (!send_pcb(dev, &adapter->tx_pcb)) { spin_unlock_irqrestore(&adapter->lock, flags); - printk(KERN_ERR "%s: couldn't send 82586 configure command\n", dev->name); + pr_err("%s: couldn't send 82586 configure command\n", dev->name); } else { unsigned long timeout = jiffies + TIMEOUT; @@ -1283,17 +1291,17 @@ static int __init elp_sense(struct net_device *dev) orig_HSR = inb_status(addr); if (elp_debug > 0) - printk(search_msg, name, addr); + pr_debug(search_msg, name, addr); if (orig_HSR == 0xff) { if (elp_debug > 0) - printk(notfound_msg, 1); + pr_cont(notfound_msg, 1); goto out; } /* Wait for a while; the adapter may still be booting up */ if (elp_debug > 0) - printk(stilllooking_msg); + pr_cont(stilllooking_msg); if (orig_HSR & DIR) { /* If HCR.DIR is up, we pull it down. HSR.DIR should follow. */ @@ -1301,7 +1309,7 @@ static int __init elp_sense(struct net_device *dev) msleep(300); if (inb_status(addr) & DIR) { if (elp_debug > 0) - printk(notfound_msg, 2); + pr_cont(notfound_msg, 2); goto out; } } else { @@ -1310,7 +1318,7 @@ static int __init elp_sense(struct net_device *dev) msleep(300); if (!(inb_status(addr) & DIR)) { if (elp_debug > 0) - printk(notfound_msg, 3); + pr_cont(notfound_msg, 3); goto out; } } @@ -1318,7 +1326,7 @@ static int __init elp_sense(struct net_device *dev) * It certainly looks like a 3c505. */ if (elp_debug > 0) - printk(found_msg); + pr_cont(found_msg); return 0; out: @@ -1349,7 +1357,7 @@ static int __init elp_autodetect(struct net_device *dev) /* could not find an adapter */ if (elp_debug > 0) - printk(couldnot_msg, dev->name); + pr_debug(couldnot_msg, dev->name); return 0; /* Because of this, the layer above will return -ENODEV */ } @@ -1424,16 +1432,16 @@ static int __init elplus_setup(struct net_device *dev) /* Nope, it's ignoring the command register. This means that * either it's still booting up, or it's died. */ - printk(KERN_ERR "%s: command register wouldn't drain, ", dev->name); + pr_err("%s: command register wouldn't drain, ", dev->name); if ((inb_status(dev->base_addr) & 7) == 3) { /* If the adapter status is 3, it *could* still be booting. * Give it the benefit of the doubt for 10 seconds. */ - printk("assuming 3c505 still starting\n"); + pr_cont("assuming 3c505 still starting\n"); timeout = jiffies + 10*HZ; while (time_before(jiffies, timeout) && (inb_status(dev->base_addr) & 7)); if (inb_status(dev->base_addr) & 7) { - printk(KERN_ERR "%s: 3c505 failed to start\n", dev->name); + pr_err("%s: 3c505 failed to start\n", dev->name); } else { okay = 1; /* It started */ } @@ -1441,7 +1449,7 @@ static int __init elplus_setup(struct net_device *dev) /* Otherwise, it must just be in a strange * state. We probably need to kick it. */ - printk("3c505 is sulking\n"); + pr_cont("3c505 is sulking\n"); } } for (tries = 0; tries < 5 && okay; tries++) { @@ -1454,18 +1462,19 @@ static int __init elplus_setup(struct net_device *dev) adapter->tx_pcb.length = 0; cookie = probe_irq_on(); if (!send_pcb(dev, &adapter->tx_pcb)) { - printk(KERN_ERR "%s: could not send first PCB\n", dev->name); + pr_err("%s: could not send first PCB\n", dev->name); probe_irq_off(cookie); continue; } if (!receive_pcb(dev, &adapter->rx_pcb)) { - printk(KERN_ERR "%s: could not read first PCB\n", dev->name); + pr_err("%s: could not read first PCB\n", dev->name); probe_irq_off(cookie); continue; } if ((adapter->rx_pcb.command != CMD_ADDRESS_RESPONSE) || (adapter->rx_pcb.length != 6)) { - printk(KERN_ERR "%s: first PCB wrong (%d, %d)\n", dev->name, adapter->rx_pcb.command, adapter->rx_pcb.length); + pr_err("%s: first PCB wrong (%d, %d)\n", dev->name, + adapter->rx_pcb.command, adapter->rx_pcb.length); probe_irq_off(cookie); continue; } @@ -1474,32 +1483,32 @@ static int __init elplus_setup(struct net_device *dev) /* It's broken. Do a hard reset to re-initialise the board, * and try again. */ - printk(KERN_INFO "%s: resetting adapter\n", dev->name); + pr_info("%s: resetting adapter\n", dev->name); outb_control(adapter->hcr_val | FLSH | ATTN, dev); outb_control(adapter->hcr_val & ~(FLSH | ATTN), dev); } - printk(KERN_ERR "%s: failed to initialise 3c505\n", dev->name); + pr_err("%s: failed to initialise 3c505\n", dev->name); goto out; okay: if (dev->irq) { /* Is there a preset IRQ? */ int rpt = probe_irq_off(cookie); if (dev->irq != rpt) { - printk(KERN_WARNING "%s: warning, irq %d configured but %d detected\n", dev->name, dev->irq, rpt); + pr_warning("%s: warning, irq %d configured but %d detected\n", dev->name, dev->irq, rpt); } /* if dev->irq == probe_irq_off(cookie), all is well */ } else /* No preset IRQ; just use what we can detect */ dev->irq = probe_irq_off(cookie); switch (dev->irq) { /* Legal, sane? */ case 0: - printk(KERN_ERR "%s: IRQ probe failed: check 3c505 jumpers.\n", + pr_err("%s: IRQ probe failed: check 3c505 jumpers.\n", dev->name); goto out; case 1: case 6: case 8: case 13: - printk(KERN_ERR "%s: Impossible IRQ %d reported by probe_irq_off().\n", + pr_err("%s: Impossible IRQ %d reported by probe_irq_off().\n", dev->name, dev->irq); goto out; } @@ -1521,7 +1530,7 @@ static int __init elplus_setup(struct net_device *dev) dev->dma = dev->mem_start & 7; } else { - printk(KERN_WARNING "%s: warning, DMA channel not specified, using default\n", dev->name); + pr_warning("%s: warning, DMA channel not specified, using default\n", dev->name); dev->dma = ELP_DMA; } } @@ -1529,11 +1538,8 @@ static int __init elplus_setup(struct net_device *dev) /* * print remainder of startup message */ - printk(KERN_INFO "%s: 3c505 at %#lx, irq %d, dma %d, " - "addr %pM, ", - dev->name, dev->base_addr, dev->irq, dev->dma, - dev->dev_addr); - + pr_info("%s: 3c505 at %#lx, irq %d, dma %d, addr %pM, ", + dev->name, dev->base_addr, dev->irq, dev->dma, dev->dev_addr); /* * read more information from the adapter */ @@ -1544,9 +1550,10 @@ static int __init elplus_setup(struct net_device *dev) !receive_pcb(dev, &adapter->rx_pcb) || (adapter->rx_pcb.command != CMD_ADAPTER_INFO_RESPONSE) || (adapter->rx_pcb.length != 10)) { - printk("not responding to second PCB\n"); + pr_cont("not responding to second PCB\n"); } - printk("rev %d.%d, %dk\n", adapter->rx_pcb.data.info.major_vers, adapter->rx_pcb.data.info.minor_vers, adapter->rx_pcb.data.info.RAM_sz); + pr_cont("rev %d.%d, %dk\n", adapter->rx_pcb.data.info.major_vers, + adapter->rx_pcb.data.info.minor_vers, adapter->rx_pcb.data.info.RAM_sz); /* * reconfigure the adapter memory to better suit our purposes @@ -1563,10 +1570,10 @@ static int __init elplus_setup(struct net_device *dev) !receive_pcb(dev, &adapter->rx_pcb) || (adapter->rx_pcb.command != CMD_CONFIGURE_ADAPTER_RESPONSE) || (adapter->rx_pcb.length != 2)) { - printk(KERN_ERR "%s: could not configure adapter memory\n", dev->name); + pr_err("%s: could not configure adapter memory\n", dev->name); } if (adapter->rx_pcb.data.configure) { - printk(KERN_ERR "%s: adapter configuration failed\n", dev->name); + pr_err("%s: adapter configuration failed\n", dev->name); } dev->netdev_ops = &elp_netdev_ops; @@ -1631,17 +1638,17 @@ int __init init_module(void) dev->dma = dma[this_dev]; } else { dev->dma = ELP_DMA; - printk(KERN_WARNING "3c505.c: warning, using default DMA channel,\n"); + pr_warning("3c505.c: warning, using default DMA channel,\n"); } if (io[this_dev] == 0) { if (this_dev) { free_netdev(dev); break; } - printk(KERN_NOTICE "3c505.c: module autoprobe not recommended, give io=xx.\n"); + pr_notice("3c505.c: module autoprobe not recommended, give io=xx.\n"); } if (elplus_setup(dev) != 0) { - printk(KERN_WARNING "3c505.c: Failed to register card at 0x%x.\n", io[this_dev]); + pr_warning("3c505.c: Failed to register card at 0x%x.\n", io[this_dev]); free_netdev(dev); break; } -- cgit v1.2.3-70-g09d2