From 1d3bb996481e116f5f2b127cbd29b83365d2cf62 Mon Sep 17 00:00:00 2001 From: David Gibson Date: Thu, 23 Aug 2007 13:56:01 +1000 Subject: Device tree aware EMAC driver Based on BenH's earlier work, this is a new version of the EMAC driver for the built-in ethernet found on PowerPC 4xx embedded CPUs. The same ASIC is also found in the Axon bridge chip. This new version is designed to work in the arch/powerpc tree, using the device tree to probe the device, rather than the old and ugly arch/ppc OCP layer. This driver is designed to sit alongside the old driver (that lies in drivers/net/ibm_emac and this one in drivers/net/ibm_newemac). The old driver is left in place to support arch/ppc until arch/ppc itself reaches its final demise (not too long now, with luck). This driver still has a number of things that could do with cleaning up, but I think they can be fixed up after merging. Specifically: - Should be adjusted to properly use the dma mapping API. Axon needs this. - Probe logic needs reworking, in conjuction with the general probing code for of_platform devices. The dependencies here between EMAC, MAL, ZMII etc. make this complicated. At present, it usually works, because we initialize and register the sub-drivers before the EMAC driver itself, and (being in driver code) runs after the devices themselves have been instantiated from the device tree. Signed-off-by: David Gibson Signed-off-by: Jeff Garzik --- drivers/net/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/Makefile') diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 2ab33e8b915..9cbef582987 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_E1000) += e1000/ obj-$(CONFIG_E1000E) += e1000e/ obj-$(CONFIG_IBM_EMAC) += ibm_emac/ +obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac/ obj-$(CONFIG_IXGBE) += ixgbe/ obj-$(CONFIG_IXGB) += ixgb/ obj-$(CONFIG_IP1000) += ipg.o -- cgit v1.2.3-70-g09d2