From 25db0338813a8915457636b1f6abe6a28fa73f8d Mon Sep 17 00:00:00 2001 From: David Decotigny Date: Wed, 27 Apr 2011 18:32:39 +0000 Subject: ethtool: Use full 32 bit speed range in ethtool's set_settings This makes sure the ethtool's set_settings() callback of network drivers don't ignore the 16 most significant bits when ethtool calls their set_settings(). All drivers compiled with make allyesconfig on x86_64 have been updated. Signed-off-by: David Decotigny Signed-off-by: David S. Miller --- drivers/net/atl1c/atl1c_ethtool.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/net/atl1c/atl1c_ethtool.c') diff --git a/drivers/net/atl1c/atl1c_ethtool.c b/drivers/net/atl1c/atl1c_ethtool.c index 3af5a336a5a..b1eceee424a 100644 --- a/drivers/net/atl1c/atl1c_ethtool.c +++ b/drivers/net/atl1c/atl1c_ethtool.c @@ -77,7 +77,8 @@ static int atl1c_set_settings(struct net_device *netdev, if (ecmd->autoneg == AUTONEG_ENABLE) { autoneg_advertised = ADVERTISED_Autoneg; } else { - if (ecmd->speed == SPEED_1000) { + u32 speed = ethtool_cmd_speed(ecmd); + if (speed == SPEED_1000) { if (ecmd->duplex != DUPLEX_FULL) { if (netif_msg_link(adapter)) dev_warn(&adapter->pdev->dev, @@ -86,7 +87,7 @@ static int atl1c_set_settings(struct net_device *netdev, return -EINVAL; } autoneg_advertised = ADVERTISED_1000baseT_Full; - } else if (ecmd->speed == SPEED_100) { + } else if (speed == SPEED_100) { if (ecmd->duplex == DUPLEX_FULL) autoneg_advertised = ADVERTISED_100baseT_Full; else -- cgit v1.2.3-70-g09d2