From 81a3516c4c127a75cc69f03d2a858f55a56eda1e Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Sun, 30 Jan 2011 04:14:48 +0000 Subject: bnx2x: Remove setting XAUI low-power for BCM8073 A rare link issue with the BCM8073 PHY may occur due to setting XAUI low power mode, while the PHY microcode already does that. The fix is not to set set XAUI low power mode for this PHY. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_link.c | 44 ------------------------------------------ 1 file changed, 44 deletions(-) (limited to 'drivers/net/bnx2x') diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index 7160ec51093..53a95a2c5e0 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -3948,48 +3948,6 @@ static u8 bnx2x_8073_8727_external_rom_boot(struct bnx2x *bp, return rc; } -static void bnx2x_8073_set_xaui_low_power_mode(struct bnx2x *bp, - struct bnx2x_phy *phy) -{ - u16 val; - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_8073_CHIP_REV, &val); - - if (val == 0) { - /* Mustn't set low power mode in 8073 A0 */ - return; - } - - /* Disable PLL sequencer (use read-modify-write to clear bit 13) */ - bnx2x_cl45_read(bp, phy, - MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, &val); - val &= ~(1<<13); - bnx2x_cl45_write(bp, phy, - MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, val); - - /* PLL controls */ - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x805E, 0x1077); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x805D, 0x0000); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x805C, 0x030B); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x805B, 0x1240); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x805A, 0x2490); - - /* Tx Controls */ - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80A7, 0x0C74); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80A6, 0x9041); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80A5, 0x4640); - - /* Rx Controls */ - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80FE, 0x01C4); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80FD, 0x9249); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80FC, 0x2015); - - /* Enable PLL sequencer (use read-modify-write to set bit 13) */ - bnx2x_cl45_read(bp, phy, MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, &val); - val |= (1<<13); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, val); -} - /******************************************************************/ /* BCM8073 PHY SECTION */ /******************************************************************/ @@ -4148,8 +4106,6 @@ static u8 bnx2x_8073_config_init(struct bnx2x_phy *phy, bnx2x_8073_set_pause_cl37(params, phy, vars); - bnx2x_8073_set_xaui_low_power_mode(bp, phy); - bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &tmp1); -- cgit v1.2.3-70-g09d2 From 53eda06def26862c0a3c57348c71a240429fbaac Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Sun, 30 Jan 2011 04:14:55 +0000 Subject: bnx2x: Fix LED blink rate on BCM84823 Fix blink rate of activity LED of the BCM84823 on 10G link Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_link.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers/net/bnx2x') diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index 53a95a2c5e0..b1c667a0031 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -6475,6 +6475,18 @@ static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LED1_MASK, 0x80); + + /* Tell LED3 to blink on source */ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LINK_SIGNAL, + &val); + val &= ~(7<<6); + val |= (1<<6); /* A83B[8:6]= 1 */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LINK_SIGNAL, + val); } break; } -- cgit v1.2.3-70-g09d2 From c8e64df48a814be1e7066f07b4f709ff63727abf Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Sun, 30 Jan 2011 04:15:00 +0000 Subject: bnx2x: Fix port swap for BCM8073 Fix link on BCM57712 + BCM8073 when port swap is enabled. Common PHY reset was done on the wrong port. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_link.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/net/bnx2x') diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index b1c667a0031..dd1210fddff 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -7688,10 +7688,13 @@ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, struct bnx2x_phy phy[PORT_MAX]; struct bnx2x_phy *phy_blk[PORT_MAX]; u16 val; - s8 port; + s8 port = 0; s8 port_of_path = 0; - - bnx2x_ext_phy_hw_reset(bp, 0); + u32 swap_val, swap_override; + swap_val = REG_RD(bp, NIG_REG_PORT_SWAP); + swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE); + port ^= (swap_val && swap_override); + bnx2x_ext_phy_hw_reset(bp, port); /* PART1 - Reset both phys */ for (port = PORT_MAX - 1; port >= PORT_0; port--) { u32 shmem_base, shmem2_base; -- cgit v1.2.3-70-g09d2 From 5866df6d07cf22749557a0804253c8fee9e87f06 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Sun, 30 Jan 2011 04:15:07 +0000 Subject: bnx2x: Fix potential link loss in multi-function mode All functions on a port should be set to take the MDC/MDIO lock to avoid contention on the bus Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_main.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'drivers/net/bnx2x') diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c index 8cdcf5b39d1..404d93e6df2 100644 --- a/drivers/net/bnx2x/bnx2x_main.c +++ b/drivers/net/bnx2x/bnx2x_main.c @@ -5296,10 +5296,6 @@ static int bnx2x_init_hw_common(struct bnx2x *bp, u32 load_code) } } - bp->port.need_hw_lock = bnx2x_hw_lock_required(bp, - bp->common.shmem_base, - bp->common.shmem2_base); - bnx2x_setup_fan_failure_detection(bp); /* clear PXP2 attentions */ @@ -5503,9 +5499,6 @@ static int bnx2x_init_hw_port(struct bnx2x *bp) bnx2x_init_block(bp, MCP_BLOCK, init_stage); bnx2x_init_block(bp, DMAE_BLOCK, init_stage); - bp->port.need_hw_lock = bnx2x_hw_lock_required(bp, - bp->common.shmem_base, - bp->common.shmem2_base); if (bnx2x_fan_failure_det_req(bp, bp->common.shmem_base, bp->common.shmem2_base, port)) { u32 reg_addr = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 : @@ -8379,6 +8372,17 @@ static void __devinit bnx2x_get_port_hwinfo(struct bnx2x *bp) (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN)) bp->mdio.prtad = XGXS_EXT_PHY_ADDR(ext_phy_config); + + /* + * Check if hw lock is required to access MDC/MDIO bus to the PHY(s) + * In MF mode, it is set to cover self test cases + */ + if (IS_MF(bp)) + bp->port.need_hw_lock = 1; + else + bp->port.need_hw_lock = bnx2x_hw_lock_required(bp, + bp->common.shmem_base, + bp->common.shmem2_base); } static void __devinit bnx2x_get_mac_hwinfo(struct bnx2x *bp) -- cgit v1.2.3-70-g09d2 From c4c93106741bbf61ecd05a2a835af8e3bf31c1bd Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Sun, 30 Jan 2011 04:15:13 +0000 Subject: bnx2x: Update bnx2x version to 1.62.00-5 Update bnx2x version to 1.62.00-5 Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net/bnx2x') diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h index 8e4183717d9..653c62475cb 100644 --- a/drivers/net/bnx2x/bnx2x.h +++ b/drivers/net/bnx2x/bnx2x.h @@ -22,8 +22,8 @@ * (you will need to reboot afterwards) */ /* #define BNX2X_STOP_ON_ERROR */ -#define DRV_MODULE_VERSION "1.62.00-4" -#define DRV_MODULE_RELDATE "2011/01/18" +#define DRV_MODULE_VERSION "1.62.00-5" +#define DRV_MODULE_RELDATE "2011/01/30" #define BNX2X_BC_VER 0x040200 #define BNX2X_MULTI_QUEUE -- cgit v1.2.3-70-g09d2 From d9c8f498c3b41e686d3306dcf01d95941fcc6b48 Mon Sep 17 00:00:00 2001 From: Vladislav Zolotarov Date: Tue, 1 Feb 2011 14:05:30 -0800 Subject: bnx2x: multicasts in NPAR mode The chip was erroneously configured to accept all multicast frames in a normal (none-promisc) rx mode both on the RSS and on the FCoE L2 rings when in an NPAR mode. This caused packet duplication for every received multicast frame in this mode. Signed-off-by: Vladislav Zolotarov Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_main.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) (limited to 'drivers/net/bnx2x') diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c index 404d93e6df2..f40740e68ea 100644 --- a/drivers/net/bnx2x/bnx2x_main.c +++ b/drivers/net/bnx2x/bnx2x_main.c @@ -2301,15 +2301,10 @@ static void bnx2x_rxq_set_mac_filters(struct bnx2x *bp, u16 cl_id, u32 filters) /* accept matched ucast */ drop_all_ucast = 0; } - if (filters & BNX2X_ACCEPT_MULTICAST) { + if (filters & BNX2X_ACCEPT_MULTICAST) /* accept matched mcast */ drop_all_mcast = 0; - if (IS_MF_SI(bp)) - /* since mcast addresses won't arrive with ovlan, - * fw needs to accept all of them in - * switch-independent mode */ - accp_all_mcast = 1; - } + if (filters & BNX2X_ACCEPT_ALL_UNICAST) { /* accept all mcast */ drop_all_ucast = 0; -- cgit v1.2.3-70-g09d2 From 711c914688163dbe757c174788e20695088478e5 Mon Sep 17 00:00:00 2001 From: Vladislav Zolotarov Date: Sun, 6 Feb 2011 11:21:49 -0800 Subject: bnx2x: Duplication in promisc mode Prevent packets duplication for frames targeting FCoE L2 ring: packets were arriving to stack from both L2 RSS and from FCoE L2 in a promiscuous mode. Configure FCoE L2 ring to DROP_ALL rx mode, when interface is configured to PROMISC, and to accept only unicast frames, when interface is configured to ALL_MULTI. Signed-off-by: Vladislav Zolotarov Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_main.c | 32 +++++++++++++++++++++++--------- 1 file changed, 23 insertions(+), 9 deletions(-) (limited to 'drivers/net/bnx2x') diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c index f40740e68ea..d584d32c747 100644 --- a/drivers/net/bnx2x/bnx2x_main.c +++ b/drivers/net/bnx2x/bnx2x_main.c @@ -4276,9 +4276,12 @@ void bnx2x_set_storm_rx_mode(struct bnx2x *bp) def_q_filters |= BNX2X_ACCEPT_UNICAST | BNX2X_ACCEPT_BROADCAST | BNX2X_ACCEPT_MULTICAST; #ifdef BCM_CNIC - cl_id = bnx2x_fcoe(bp, cl_id); - bnx2x_rxq_set_mac_filters(bp, cl_id, BNX2X_ACCEPT_UNICAST | - BNX2X_ACCEPT_MULTICAST); + if (!NO_FCOE(bp)) { + cl_id = bnx2x_fcoe(bp, cl_id); + bnx2x_rxq_set_mac_filters(bp, cl_id, + BNX2X_ACCEPT_UNICAST | + BNX2X_ACCEPT_MULTICAST); + } #endif break; @@ -4286,18 +4289,29 @@ void bnx2x_set_storm_rx_mode(struct bnx2x *bp) def_q_filters |= BNX2X_ACCEPT_UNICAST | BNX2X_ACCEPT_BROADCAST | BNX2X_ACCEPT_ALL_MULTICAST; #ifdef BCM_CNIC - cl_id = bnx2x_fcoe(bp, cl_id); - bnx2x_rxq_set_mac_filters(bp, cl_id, BNX2X_ACCEPT_UNICAST | - BNX2X_ACCEPT_MULTICAST); + /* + * Prevent duplication of multicast packets by configuring FCoE + * L2 Client to receive only matched unicast frames. + */ + if (!NO_FCOE(bp)) { + cl_id = bnx2x_fcoe(bp, cl_id); + bnx2x_rxq_set_mac_filters(bp, cl_id, + BNX2X_ACCEPT_UNICAST); + } #endif break; case BNX2X_RX_MODE_PROMISC: def_q_filters |= BNX2X_PROMISCUOUS_MODE; #ifdef BCM_CNIC - cl_id = bnx2x_fcoe(bp, cl_id); - bnx2x_rxq_set_mac_filters(bp, cl_id, BNX2X_ACCEPT_UNICAST | - BNX2X_ACCEPT_MULTICAST); + /* + * Prevent packets duplication by configuring DROP_ALL for FCoE + * L2 Client. + */ + if (!NO_FCOE(bp)) { + cl_id = bnx2x_fcoe(bp, cl_id); + bnx2x_rxq_set_mac_filters(bp, cl_id, BNX2X_ACCEPT_NONE); + } #endif /* pass management unicast packets as well */ llh_mask |= NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_UNCST; -- cgit v1.2.3-70-g09d2