From 589abe3a0f594a7707a15674ca9e80370c972832 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Thu, 12 Feb 2009 08:36:55 +0000 Subject: bnx2x: Supporting BCM8726 PHY Also adding the ability to recognize the optic module and disable it if it is not authorized for safety reasons - since this feature might upset some users which are willing to take the risk, it is optional and can be disabled by setting an nvram bit (or a trivial driver patch to set this bit). This dual port PHY requires special handling if the ports are swapped. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_hsi.h | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'drivers/net/bnx2x_hsi.h') diff --git a/drivers/net/bnx2x_hsi.h b/drivers/net/bnx2x_hsi.h index 85e4df68b5d..7b9acb3667e 100644 --- a/drivers/net/bnx2x_hsi.h +++ b/drivers/net/bnx2x_hsi.h @@ -245,7 +245,7 @@ struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */ #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073 0x00000300 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705 0x00000400 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706 0x00000500 -#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8276 0x00000600 +#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726 0x00000600 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481 0x00000700 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101 0x00000800 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE 0x0000fd00 @@ -299,6 +299,12 @@ struct shared_feat_cfg { /* NVRAM Offset */ u32 config; /* 0x450 */ #define SHARED_FEATURE_BMC_ECHO_MODE_EN 0x00000001 + + /* Use the values from options 47 and 48 instead of the HW default + values */ +#define SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_DISABLED 0x00000000 +#define SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_ENABLED 0x00000002 + #define SHARED_FEATURE_MF_MODE_DISABLED 0x00000100 }; @@ -352,6 +358,11 @@ struct port_feat_cfg { /* port 0: 0x454 port 1: 0x4c8 */ #define PORT_FEATURE_MBA_ENABLED 0x02000000 #define PORT_FEATURE_MFW_ENABLED 0x04000000 + /* Check the optic vendor via i2c before allowing it to be used by + SW */ +#define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLED 0x00000000 +#define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_ENABLED 0x08000000 + u32 wol_config; /* Default is used when driver sets to "auto" mode */ #define PORT_FEATURE_WOL_DEFAULT_MASK 0x00000003 -- cgit v1.2.3-70-g09d2