From 3347162995d23bc13f6f99c02ae89814babcaec2 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Wed, 13 Aug 2008 15:59:08 -0700 Subject: bnx2x: Spelling mistakes Spelling mistakes Spelling has to L's in it... Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'drivers/net/bnx2x_main.c') diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index d3c4c1ed07e..1bbcdb22d96 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -1151,8 +1151,8 @@ static inline void bnx2x_init_sge_ring_bit_mask(struct bnx2x_fastpath *fp) memset(fp->sge_mask, 0xff, (NUM_RX_SGE >> RX_SGE_MASK_ELEM_SHIFT)*sizeof(u64)); - /* Clear the two last indeces in the page to 1: - these are the indeces that correspond to the "next" element, + /* Clear the two last indices in the page to 1: + these are the indices that correspond to the "next" element, hence will never be indicated and should be removed from the calculations. */ bnx2x_clear_sge_mask_next_elems(fp); @@ -2011,7 +2011,7 @@ static u8 bnx2x_link_test(struct bnx2x *bp) sum of vn_min_rates or 0 - if all the min_rates are 0. - In the later case fainess algorithm should be deactivated. + In the later case fairness algorithm should be deactivated. If not all min_rates are zero then those that are zeroes will be set to 1. */ @@ -2134,7 +2134,7 @@ static void bnx2x_init_vn_minmax(struct bnx2x *bp, int func, FUNC_MF_CFG_MIN_BW_SHIFT) * 100; /* If FAIRNESS is enabled (not all min rates are zeroes) and if current min rate is zero - set it to 1. - This is a requirment of the algorithm. */ + This is a requirement of the algorithm. */ if ((vn_min_rate == 0) && wsum) vn_min_rate = DEF_MIN_RATE; vn_max_rate = ((vn_cfg & FUNC_MF_CFG_MAX_BW_MASK) >> @@ -6562,7 +6562,7 @@ static void bnx2x_reset_port(struct bnx2x *bp) val = REG_RD(bp, BRB1_REG_PORT_NUM_OCC_BLOCKS_0 + port*4); if (val) DP(NETIF_MSG_IFDOWN, - "BRB1 is not empty %d blooks are occupied\n", val); + "BRB1 is not empty %d blocks are occupied\n", val); /* TODO: Close Doorbell port? */ } @@ -6602,7 +6602,7 @@ static void bnx2x_reset_chip(struct bnx2x *bp, u32 reset_code) } } -/* msut be called with rtnl_lock */ +/* must be called with rtnl_lock */ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode) { int port = BP_PORT(bp); @@ -7455,7 +7455,7 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp) if (BP_NOMCP(bp)) { /* only supposed to happen on emulation/FPGA */ - BNX2X_ERR("warning rendom MAC workaround active\n"); + BNX2X_ERR("warning random MAC workaround active\n"); random_ether_addr(bp->dev->dev_addr); memcpy(bp->dev->perm_addr, bp->dev->dev_addr, ETH_ALEN); } @@ -8907,7 +8907,7 @@ static void bnx2x_self_test(struct net_device *dev, if (!netif_running(dev)) return; - /* offline tests are not suppoerted in MF mode */ + /* offline tests are not supported in MF mode */ if (IS_E1HMF(bp)) etest->flags &= ~ETH_TEST_FL_OFFLINE; @@ -9216,7 +9216,7 @@ static int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state) PCI_PM_CTRL_PME_STATUS)); if (pmcsr & PCI_PM_CTRL_STATE_MASK) - /* delay required during transition out of D3hot */ + /* delay required during transition out of D3hot */ msleep(20); break; @@ -9289,7 +9289,7 @@ poll_panic: /* we split the first BD into headers and data BDs - * to ease the pain of our fellow micocode engineers + * to ease the pain of our fellow microcode engineers * we use one mapping for both BDs * So far this has only been observed to happen * in Other Operating Systems(TM) @@ -9396,7 +9396,7 @@ static int bnx2x_pkt_req_lin(struct bnx2x *bp, struct sk_buff *skb, /* Check if LSO packet needs to be copied: 3 = 1 (for headers BD) + 2 (for PBD and last BD) */ int wnd_size = MAX_FETCH_BD - 3; - /* Number of widnows to check */ + /* Number of windows to check */ int num_wnds = skb_shinfo(skb)->nr_frags - wnd_size; int wnd_idx = 0; int frag_idx = 0; @@ -9498,7 +9498,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) skb->ip_summed, skb->protocol, ipv6_hdr(skb)->nexthdr, ip_hdr(skb)->protocol, skb_shinfo(skb)->gso_type, xmit_type); - /* First, check if we need to linearaize the skb + /* First, check if we need to linearize the skb (due to FW restrictions) */ if (bnx2x_pkt_req_lin(bp, skb, xmit_type)) { /* Statistics of linearization */ -- cgit v1.2.3-70-g09d2