From 9b27105b4a44c54bf91ecd7d0315034ae75684f7 Mon Sep 17 00:00:00 2001 From: Sjur Braendeland Date: Tue, 30 Mar 2010 13:56:30 +0000 Subject: net-caif-driver: add CAIF serial driver (ldisc) Add CAIF Serial driver. This driver is implemented as a line discipline. caif_serial uses the following module parameters: ser_use_stx - specifies if STart of frame eXtension is in use. ser_loop - sets the interface in loopback mode. Signed-off-by: Sjur Braendeland Signed-off-by: David S. Miller --- drivers/net/caif/Kconfig | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 drivers/net/caif/Kconfig (limited to 'drivers/net/caif/Kconfig') diff --git a/drivers/net/caif/Kconfig b/drivers/net/caif/Kconfig new file mode 100644 index 00000000000..0b28e010769 --- /dev/null +++ b/drivers/net/caif/Kconfig @@ -0,0 +1,17 @@ +# +# CAIF physical drivers +# + +if CAIF + +comment "CAIF transport drivers" + +config CAIF_TTY + tristate "CAIF TTY transport driver" + default n + ---help--- + The CAIF TTY transport driver is a Line Discipline (ldisc) + identified as N_CAIF. When this ldisc is opened from user space + it will redirect the TTY's traffic into the CAIF stack. + +endif # CAIF -- cgit v1.2.3-70-g09d2 From 01eebb53a65996dfbfb892bf5eb21ae831fbe3a6 Mon Sep 17 00:00:00 2001 From: Sjur Braendeland Date: Sat, 26 Jun 2010 11:31:28 +0000 Subject: caif: Kconfig and Makefile fixes Use "depends on" instead of "if" in Kconfig files. Fixed CAIF debug flag, and removed unnecessary clean-* options. Signed-off-by: Sjur Braendeland Signed-off-by: David S. Miller --- drivers/net/caif/Kconfig | 5 +---- drivers/net/caif/Makefile | 10 ++-------- net/caif/Kconfig | 7 ++----- net/caif/Makefile | 14 ++------------ 4 files changed, 7 insertions(+), 29 deletions(-) (limited to 'drivers/net/caif/Kconfig') diff --git a/drivers/net/caif/Kconfig b/drivers/net/caif/Kconfig index 0b28e010769..6f33ee453f4 100644 --- a/drivers/net/caif/Kconfig +++ b/drivers/net/caif/Kconfig @@ -2,16 +2,13 @@ # CAIF physical drivers # -if CAIF - comment "CAIF transport drivers" config CAIF_TTY tristate "CAIF TTY transport driver" + depends on CAIF default n ---help--- The CAIF TTY transport driver is a Line Discipline (ldisc) identified as N_CAIF. When this ldisc is opened from user space it will redirect the TTY's traffic into the CAIF stack. - -endif # CAIF diff --git a/drivers/net/caif/Makefile b/drivers/net/caif/Makefile index 52b6d1f826f..e6d3ca06ecf 100644 --- a/drivers/net/caif/Makefile +++ b/drivers/net/caif/Makefile @@ -1,12 +1,6 @@ -ifeq ($(CONFIG_CAIF_DEBUG),1) -CAIF_DBG_FLAGS := -DDEBUG +ifeq ($(CONFIG_CAIF_DEBUG),y) +EXTRA_CFLAGS += -DDEBUG endif -KBUILD_EXTRA_SYMBOLS=net/caif/Module.symvers - -ccflags-y := $(CAIF_FLAGS) $(CAIF_DBG_FLAGS) -clean-dirs:= .tmp_versions -clean-files:= Module.symvers modules.order *.cmd *~ \ - # Serial interface obj-$(CONFIG_CAIF_TTY) += caif_serial.o diff --git a/net/caif/Kconfig b/net/caif/Kconfig index ed651786f16..529750da962 100644 --- a/net/caif/Kconfig +++ b/net/caif/Kconfig @@ -21,19 +21,18 @@ menuconfig CAIF See Documentation/networking/caif for a further explanation on how to use and configure CAIF. -if CAIF - config CAIF_DEBUG bool "Enable Debug" + depends on CAIF default n --- help --- Enable the inclusion of debug code in the CAIF stack. Be aware that doing this will impact performance. If unsure say N. - config CAIF_NETDEV tristate "CAIF GPRS Network device" + depends on CAIF default CAIF ---help--- Say Y if you will be using a CAIF based GPRS network device. @@ -41,5 +40,3 @@ config CAIF_NETDEV If you select to build it as a built-in then the main CAIF device must also be a built-in. If unsure say Y. - -endif diff --git a/net/caif/Makefile b/net/caif/Makefile index 34852af2595..f87481fb0e6 100644 --- a/net/caif/Makefile +++ b/net/caif/Makefile @@ -1,23 +1,13 @@ -ifeq ($(CONFIG_CAIF_DEBUG),1) -CAIF_DBG_FLAGS := -DDEBUG +ifeq ($(CONFIG_CAIF_DEBUG),y) +EXTRA_CFLAGS += -DDEBUG endif -ccflags-y := $(CAIF_FLAGS) $(CAIF_DBG_FLAGS) - caif-objs := caif_dev.o \ cfcnfg.o cfmuxl.o cfctrl.o \ cffrml.o cfveil.o cfdbgl.o\ cfserl.o cfdgml.o \ cfrfml.o cfvidl.o cfutill.o \ cfsrvl.o cfpkt_skbuff.o caif_config_util.o -clean-dirs:= .tmp_versions - -clean-files:= \ - Module.symvers \ - modules.order \ - *.cmd \ - *.o \ - *~ obj-$(CONFIG_CAIF) += caif.o obj-$(CONFIG_CAIF_NETDEV) += chnl_net.o -- cgit v1.2.3-70-g09d2 From 529d6dad5bc69de14cdd24831e2a14264e93daa4 Mon Sep 17 00:00:00 2001 From: Sjur Braendeland Date: Tue, 29 Jun 2010 00:08:21 -0700 Subject: caif-driver: Add CAIF-SPI Protocol driver. This patch introduces the CAIF SPI Protocol Driver for CAIF Link Layer. This driver implements a platform driver to accommodate for a platform specific SPI device. A general platform driver is not possible as there are no SPI Slave side Kernel API defined. A sample CAIF SPI Platform device can be found in .../Documentation/networking/caif/spi_porting.txt Signed-off-by: Sjur Braendeland Signed-off-by: David S. Miller --- Documentation/networking/caif/spi_porting.txt | 208 +++++++ drivers/net/caif/Kconfig | 19 + drivers/net/caif/Makefile | 4 + drivers/net/caif/caif_spi.c | 847 ++++++++++++++++++++++++++ drivers/net/caif/caif_spi_slave.c | 252 ++++++++ include/net/caif/caif_spi.h | 153 +++++ 6 files changed, 1483 insertions(+) create mode 100644 Documentation/networking/caif/spi_porting.txt create mode 100644 drivers/net/caif/caif_spi.c create mode 100644 drivers/net/caif/caif_spi_slave.c create mode 100644 include/net/caif/caif_spi.h (limited to 'drivers/net/caif/Kconfig') diff --git a/Documentation/networking/caif/spi_porting.txt b/Documentation/networking/caif/spi_porting.txt new file mode 100644 index 00000000000..61d7c924745 --- /dev/null +++ b/Documentation/networking/caif/spi_porting.txt @@ -0,0 +1,208 @@ +- CAIF SPI porting - + +- CAIF SPI basics: + +Running CAIF over SPI needs some extra setup, owing to the nature of SPI. +Two extra GPIOs have been added in order to negotiate the transfers + between the master and the slave. The minimum requirement for running +CAIF over SPI is a SPI slave chip and two GPIOs (more details below). +Please note that running as a slave implies that you need to keep up +with the master clock. An overrun or underrun event is fatal. + +- CAIF SPI framework: + +To make porting as easy as possible, the CAIF SPI has been divided in +two parts. The first part (called the interface part) deals with all +generic functionality such as length framing, SPI frame negotiation +and SPI frame delivery and transmission. The other part is the CAIF +SPI slave device part, which is the module that you have to write if +you want to run SPI CAIF on a new hardware. This part takes care of +the physical hardware, both with regard to SPI and to GPIOs. + +- Implementing a CAIF SPI device: + + - Functionality provided by the CAIF SPI slave device: + + In order to implement a SPI device you will, as a minimum, + need to implement the following + functions: + + int (*init_xfer) (struct cfspi_xfer * xfer, struct cfspi_dev *dev): + + This function is called by the CAIF SPI interface to give + you a chance to set up your hardware to be ready to receive + a stream of data from the master. The xfer structure contains + both physical and logical adresses, as well as the total length + of the transfer in both directions.The dev parameter can be used + to map to different CAIF SPI slave devices. + + void (*sig_xfer) (bool xfer, struct cfspi_dev *dev): + + This function is called by the CAIF SPI interface when the output + (SPI_INT) GPIO needs to change state. The boolean value of the xfer + variable indicates whether the GPIO should be asserted (HIGH) or + deasserted (LOW). The dev parameter can be used to map to different CAIF + SPI slave devices. + + - Functionality provided by the CAIF SPI interface: + + void (*ss_cb) (bool assert, struct cfspi_ifc *ifc); + + This function is called by the CAIF SPI slave device in order to + signal a change of state of the input GPIO (SS) to the interface. + Only active edges are mandatory to be reported. + This function can be called from IRQ context (recommended in order + not to introduce latency). The ifc parameter should be the pointer + returned from the platform probe function in the SPI device structure. + + void (*xfer_done_cb) (struct cfspi_ifc *ifc); + + This function is called by the CAIF SPI slave device in order to + report that a transfer is completed. This function should only be + called once both the transmission and the reception are completed. + This function can be called from IRQ context (recommended in order + not to introduce latency). The ifc parameter should be the pointer + returned from the platform probe function in the SPI device structure. + + - Connecting the bits and pieces: + + - Filling in the SPI slave device structure: + + Connect the necessary callback functions. + Indicate clock speed (used to calculate toggle delays). + Chose a suitable name (helps debugging if you use several CAIF + SPI slave devices). + Assign your private data (can be used to map to your structure). + + - Filling in the SPI slave platform device structure: + Add name of driver to connect to ("cfspi_sspi"). + Assign the SPI slave device structure as platform data. + +- Padding: + +In order to optimize throughput, a number of SPI padding options are provided. +Padding can be enabled independently for uplink and downlink transfers. +Padding can be enabled for the head, the tail and for the total frame size. +The padding needs to be correctly configured on both sides of the link. +The padding can be changed via module parameters in cfspi_sspi.c or via +the sysfs directory of the cfspi_sspi driver (before device registration). + +- CAIF SPI device template: + +/* + * Copyright (C) ST-Ericsson AB 2010 + * Author: Daniel Martensson / Daniel.Martensson@stericsson.com + * License terms: GNU General Public License (GPL), version 2. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +MODULE_LICENSE("GPL"); + +struct sspi_struct { + struct cfspi_dev sdev; + struct cfspi_xfer *xfer; +}; + +static struct sspi_struct slave; +static struct platform_device slave_device; + +static irqreturn_t sspi_irq(int irq, void *arg) +{ + /* You only need to trigger on an edge to the active state of the + * SS signal. Once a edge is detected, the ss_cb() function should be + * called with the parameter assert set to true. It is OK + * (and even advised) to call the ss_cb() function in IRQ context in + * order not to add any delay. */ + + return IRQ_HANDLED; +} + +static void sspi_complete(void *context) +{ + /* Normally the DMA or the SPI framework will call you back + * in something similar to this. The only thing you need to + * do is to call the xfer_done_cb() function, providing the pointer + * to the CAIF SPI interface. It is OK to call this function + * from IRQ context. */ +} + +static int sspi_init_xfer(struct cfspi_xfer *xfer, struct cfspi_dev *dev) +{ + /* Store transfer info. For a normal implementation you should + * set up your DMA here and make sure that you are ready to + * receive the data from the master SPI. */ + + struct sspi_struct *sspi = (struct sspi_struct *)dev->priv; + + sspi->xfer = xfer; + + return 0; +} + +void sspi_sig_xfer(bool xfer, struct cfspi_dev *dev) +{ + /* If xfer is true then you should assert the SPI_INT to indicate to + * the master that you are ready to recieve the data from the master + * SPI. If xfer is false then you should de-assert SPI_INT to indicate + * that the transfer is done. + */ + + struct sspi_struct *sspi = (struct sspi_struct *)dev->priv; +} + +static void sspi_release(struct device *dev) +{ + /* + * Here you should release your SPI device resources. + */ +} + +static int __init sspi_init(void) +{ + /* Here you should initialize your SPI device by providing the + * necessary functions, clock speed, name and private data. Once + * done, you can register your device with the + * platform_device_register() function. This function will return + * with the CAIF SPI interface initialized. This is probably also + * the place where you should set up your GPIOs, interrupts and SPI + * resources. */ + + int res = 0; + + /* Initialize slave device. */ + slave.sdev.init_xfer = sspi_init_xfer; + slave.sdev.sig_xfer = sspi_sig_xfer; + slave.sdev.clk_mhz = 13; + slave.sdev.priv = &slave; + slave.sdev.name = "spi_sspi"; + slave_device.dev.release = sspi_release; + + /* Initialize platform device. */ + slave_device.name = "cfspi_sspi"; + slave_device.dev.platform_data = &slave.sdev; + + /* Register platform device. */ + res = platform_device_register(&slave_device); + if (res) { + printk(KERN_WARNING "sspi_init: failed to register dev.\n"); + return -ENODEV; + } + + return res; +} + +static void __exit sspi_exit(void) +{ + platform_device_del(&slave_device); +} + +module_init(sspi_init); +module_exit(sspi_exit); diff --git a/drivers/net/caif/Kconfig b/drivers/net/caif/Kconfig index 6f33ee453f4..631a6242b01 100644 --- a/drivers/net/caif/Kconfig +++ b/drivers/net/caif/Kconfig @@ -12,3 +12,22 @@ config CAIF_TTY The CAIF TTY transport driver is a Line Discipline (ldisc) identified as N_CAIF. When this ldisc is opened from user space it will redirect the TTY's traffic into the CAIF stack. + +config CAIF_SPI_SLAVE + tristate "CAIF SPI transport driver for slave interface" + depends on CAIF + default n + ---help--- + The CAIF Link layer SPI Protocol driver for Slave SPI interface. + This driver implements a platform driver to accommodate for a + platform specific SPI device. A sample CAIF SPI Platform device is + provided in Documentation/networking/caif/spi_porting.txt + +config CAIF_SPI_SYNC + bool "Next command and length in start of frame" + depends on CAIF_SPI_SLAVE + default n + ---help--- + Putting the next command and length in the start of the frame can + help to synchronize to the next transfer in case of over or under-runs. + This option also needs to be enabled on the modem. diff --git a/drivers/net/caif/Makefile b/drivers/net/caif/Makefile index e6d3ca06ecf..3a11d619452 100644 --- a/drivers/net/caif/Makefile +++ b/drivers/net/caif/Makefile @@ -4,3 +4,7 @@ endif # Serial interface obj-$(CONFIG_CAIF_TTY) += caif_serial.o + +# SPI slave physical interfaces module +cfspi_slave-objs := caif_spi.o caif_spi_slave.o +obj-$(CONFIG_CAIF_SPI_SLAVE) += cfspi_slave.o diff --git a/drivers/net/caif/caif_spi.c b/drivers/net/caif/caif_spi.c new file mode 100644 index 00000000000..03049e86e8a --- /dev/null +++ b/drivers/net/caif/caif_spi.c @@ -0,0 +1,847 @@ +/* + * Copyright (C) ST-Ericsson AB 2010 + * Contact: Sjur Brendeland / sjur.brandeland@stericsson.com + * Author: Daniel Martensson / Daniel.Martensson@stericsson.com + * License terms: GNU General Public License (GPL) version 2. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifndef CONFIG_CAIF_SPI_SYNC +#define FLAVOR "Flavour: Vanilla.\n" +#else +#define FLAVOR "Flavour: Master CMD&LEN at start.\n" +#endif /* CONFIG_CAIF_SPI_SYNC */ + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Daniel Martensson"); +MODULE_DESCRIPTION("CAIF SPI driver"); + +static int spi_loop; +module_param(spi_loop, bool, S_IRUGO); +MODULE_PARM_DESC(spi_loop, "SPI running in loopback mode."); + +/* SPI frame alignment. */ +module_param(spi_frm_align, int, S_IRUGO); +MODULE_PARM_DESC(spi_frm_align, "SPI frame alignment."); + +/* SPI padding options. */ +module_param(spi_up_head_align, int, S_IRUGO); +MODULE_PARM_DESC(spi_up_head_align, "SPI uplink head alignment."); + +module_param(spi_up_tail_align, int, S_IRUGO); +MODULE_PARM_DESC(spi_up_tail_align, "SPI uplink tail alignment."); + +module_param(spi_down_head_align, int, S_IRUGO); +MODULE_PARM_DESC(spi_down_head_align, "SPI downlink head alignment."); + +module_param(spi_down_tail_align, int, S_IRUGO); +MODULE_PARM_DESC(spi_down_tail_align, "SPI downlink tail alignment."); + +#ifdef CONFIG_ARM +#define BYTE_HEX_FMT "%02X" +#else +#define BYTE_HEX_FMT "%02hhX" +#endif + +#define SPI_MAX_PAYLOAD_SIZE 4096 +/* + * Threshold values for the SPI packet queue. Flowcontrol will be asserted + * when the number of packets exceeds HIGH_WATER_MARK. It will not be + * deasserted before the number of packets drops below LOW_WATER_MARK. + */ +#define LOW_WATER_MARK 100 +#define HIGH_WATER_MARK (LOW_WATER_MARK*5) + +#ifdef CONFIG_UML + +/* + * We sometimes use UML for debugging, but it cannot handle + * dma_alloc_coherent so we have to wrap it. + */ +static inline void *dma_alloc(dma_addr_t *daddr) +{ + return kmalloc(SPI_DMA_BUF_LEN, GFP_KERNEL); +} + +static inline void dma_free(void *cpu_addr, dma_addr_t handle) +{ + kfree(cpu_addr); +} + +#else + +static inline void *dma_alloc(dma_addr_t *daddr) +{ + return dma_alloc_coherent(NULL, SPI_DMA_BUF_LEN, daddr, + GFP_KERNEL); +} + +static inline void dma_free(void *cpu_addr, dma_addr_t handle) +{ + dma_free_coherent(NULL, SPI_DMA_BUF_LEN, cpu_addr, handle); +} +#endif /* CONFIG_UML */ + +#ifdef CONFIG_DEBUG_FS + +#define DEBUGFS_BUF_SIZE 4096 + +static struct dentry *dbgfs_root; + +static inline void driver_debugfs_create(void) +{ + dbgfs_root = debugfs_create_dir(cfspi_spi_driver.driver.name, NULL); +} + +static inline void driver_debugfs_remove(void) +{ + debugfs_remove(dbgfs_root); +} + +static inline void dev_debugfs_rem(struct cfspi *cfspi) +{ + debugfs_remove(cfspi->dbgfs_frame); + debugfs_remove(cfspi->dbgfs_state); + debugfs_remove(cfspi->dbgfs_dir); +} + +static int dbgfs_open(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + return 0; +} + +static ssize_t dbgfs_state(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + char *buf; + int len = 0; + ssize_t size; + struct cfspi *cfspi = (struct cfspi *)file->private_data; + + buf = kzalloc(DEBUGFS_BUF_SIZE, GFP_KERNEL); + if (!buf) + return 0; + + /* Print out debug information. */ + len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), + "CAIF SPI debug information:\n"); + + len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), FLAVOR); + + len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), + "STATE: %d\n", cfspi->dbg_state); + len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), + "Previous CMD: 0x%x\n", cfspi->pcmd); + len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), + "Current CMD: 0x%x\n", cfspi->cmd); + len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), + "Previous TX len: %d\n", cfspi->tx_ppck_len); + len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), + "Previous RX len: %d\n", cfspi->rx_ppck_len); + len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), + "Current TX len: %d\n", cfspi->tx_cpck_len); + len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), + "Current RX len: %d\n", cfspi->rx_cpck_len); + len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), + "Next TX len: %d\n", cfspi->tx_npck_len); + len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), + "Next RX len: %d\n", cfspi->rx_npck_len); + + size = simple_read_from_buffer(user_buf, count, ppos, buf, len); + kfree(buf); + + return size; +} + +static ssize_t print_frame(char *buf, size_t size, char *frm, + size_t count, size_t cut) +{ + int len = 0; + int i; + for (i = 0; i < count; i++) { + len += snprintf((buf + len), (size - len), + "[0x" BYTE_HEX_FMT "]", + frm[i]); + if ((i == cut) && (count > (cut * 2))) { + /* Fast forward. */ + i = count - cut; + len += snprintf((buf + len), (size - len), + "--- %u bytes skipped ---\n", + (int)(count - (cut * 2))); + } + + if ((!(i % 10)) && i) { + len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), + "\n"); + } + } + len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), "\n"); + return len; +} + +static ssize_t dbgfs_frame(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + char *buf; + int len = 0; + ssize_t size; + struct cfspi *cfspi; + + cfspi = (struct cfspi *)file->private_data; + buf = kzalloc(DEBUGFS_BUF_SIZE, GFP_KERNEL); + if (!buf) + return 0; + + /* Print out debug information. */ + len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), + "Current frame:\n"); + + len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), + "Tx data (Len: %d):\n", cfspi->tx_cpck_len); + + len += print_frame((buf + len), (DEBUGFS_BUF_SIZE - len), + cfspi->xfer.va_tx, + (cfspi->tx_cpck_len + SPI_CMD_SZ), 100); + + len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), + "Rx data (Len: %d):\n", cfspi->rx_cpck_len); + + len += print_frame((buf + len), (DEBUGFS_BUF_SIZE - len), + cfspi->xfer.va_rx, + (cfspi->rx_cpck_len + SPI_CMD_SZ), 100); + + size = simple_read_from_buffer(user_buf, count, ppos, buf, len); + kfree(buf); + + return size; +} + +static const struct file_operations dbgfs_state_fops = { + .open = dbgfs_open, + .read = dbgfs_state, + .owner = THIS_MODULE +}; + +static const struct file_operations dbgfs_frame_fops = { + .open = dbgfs_open, + .read = dbgfs_frame, + .owner = THIS_MODULE +}; + +static inline void dev_debugfs_add(struct cfspi *cfspi) +{ + cfspi->dbgfs_dir = debugfs_create_dir(cfspi->pdev->name, dbgfs_root); + cfspi->dbgfs_state = debugfs_create_file("state", S_IRUGO, + cfspi->dbgfs_dir, cfspi, + &dbgfs_state_fops); + cfspi->dbgfs_frame = debugfs_create_file("frame", S_IRUGO, + cfspi->dbgfs_dir, cfspi, + &dbgfs_frame_fops); +} + +inline void cfspi_dbg_state(struct cfspi *cfspi, int state) +{ + cfspi->dbg_state = state; +}; +#else + +static inline void driver_debugfs_create(void) +{ +} + +static inline void driver_debugfs_remove(void) +{ +} + +static inline void dev_debugfs_add(struct cfspi *cfspi) +{ +} + +static inline void dev_debugfs_rem(struct cfspi *cfspi) +{ +} + +inline void cfspi_dbg_state(struct cfspi *cfspi, int state) +{ +} +#endif /* CONFIG_DEBUG_FS */ + +static LIST_HEAD(cfspi_list); +static spinlock_t cfspi_list_lock; + +/* SPI uplink head alignment. */ +static ssize_t show_up_head_align(struct device_driver *driver, char *buf) +{ + return sprintf(buf, "%d\n", spi_up_head_align); +} + +static DRIVER_ATTR(up_head_align, S_IRUSR, show_up_head_align, NULL); + +/* SPI uplink tail alignment. */ +static ssize_t show_up_tail_align(struct device_driver *driver, char *buf) +{ + return sprintf(buf, "%d\n", spi_up_tail_align); +} + +static DRIVER_ATTR(up_tail_align, S_IRUSR, show_up_tail_align, NULL); + +/* SPI downlink head alignment. */ +static ssize_t show_down_head_align(struct device_driver *driver, char *buf) +{ + return sprintf(buf, "%d\n", spi_down_head_align); +} + +static DRIVER_ATTR(down_head_align, S_IRUSR, show_down_head_align, NULL); + +/* SPI downlink tail alignment. */ +static ssize_t show_down_tail_align(struct device_driver *driver, char *buf) +{ + return sprintf(buf, "%d\n", spi_down_tail_align); +} + +static DRIVER_ATTR(down_tail_align, S_IRUSR, show_down_tail_align, NULL); + +/* SPI frame alignment. */ +static ssize_t show_frame_align(struct device_driver *driver, char *buf) +{ + return sprintf(buf, "%d\n", spi_frm_align); +} + +static DRIVER_ATTR(frame_align, S_IRUSR, show_frame_align, NULL); + +int cfspi_xmitfrm(struct cfspi *cfspi, u8 *buf, size_t len) +{ + u8 *dst = buf; + caif_assert(buf); + + do { + struct sk_buff *skb; + struct caif_payload_info *info; + int spad = 0; + int epad; + + skb = skb_dequeue(&cfspi->chead); + if (!skb) + break; + + /* + * Calculate length of frame including SPI padding. + * The payload position is found in the control buffer. + */ + info = (struct caif_payload_info *)&skb->cb; + + /* + * Compute head offset i.e. number of bytes to add to + * get the start of the payload aligned. + */ + if (spi_up_head_align) { + spad = 1 + ((info->hdr_len + 1) & spi_up_head_align); + *dst = (u8)(spad - 1); + dst += spad; + } + + /* Copy in CAIF frame. */ + skb_copy_bits(skb, 0, dst, skb->len); + dst += skb->len; + cfspi->ndev->stats.tx_packets++; + cfspi->ndev->stats.tx_bytes += skb->len; + + /* + * Compute tail offset i.e. number of bytes to add to + * get the complete CAIF frame aligned. + */ + epad = (skb->len + spad) & spi_up_tail_align; + dst += epad; + + dev_kfree_skb(skb); + + } while ((dst - buf) < len); + + return dst - buf; +} + +int cfspi_xmitlen(struct cfspi *cfspi) +{ + struct sk_buff *skb = NULL; + int frm_len = 0; + int pkts = 0; + + /* + * Decommit previously commited frames. + * skb_queue_splice_tail(&cfspi->chead,&cfspi->qhead) + */ + while (skb_peek(&cfspi->chead)) { + skb = skb_dequeue_tail(&cfspi->chead); + skb_queue_head(&cfspi->qhead, skb); + } + + do { + struct caif_payload_info *info = NULL; + int spad = 0; + int epad = 0; + + skb = skb_dequeue(&cfspi->qhead); + if (!skb) + break; + + /* + * Calculate length of frame including SPI padding. + * The payload position is found in the control buffer. + */ + info = (struct caif_payload_info *)&skb->cb; + + /* + * Compute head offset i.e. number of bytes to add to + * get the start of the payload aligned. + */ + if (spi_up_head_align) + spad = 1 + ((info->hdr_len + 1) & spi_up_head_align); + + /* + * Compute tail offset i.e. number of bytes to add to + * get the complete CAIF frame aligned. + */ + epad = (skb->len + spad) & spi_up_tail_align; + + if ((skb->len + spad + epad + frm_len) <= CAIF_MAX_SPI_FRAME) { + skb_queue_tail(&cfspi->chead, skb); + pkts++; + frm_len += skb->len + spad + epad; + } else { + /* Put back packet. */ + skb_queue_head(&cfspi->qhead, skb); + } + } while (pkts <= CAIF_MAX_SPI_PKTS); + + /* + * Send flow on if previously sent flow off + * and now go below the low water mark + */ + if (cfspi->flow_off_sent && cfspi->qhead.qlen < cfspi->qd_low_mark && + cfspi->cfdev.flowctrl) { + cfspi->flow_off_sent = 0; + cfspi->cfdev.flowctrl(cfspi->ndev, 1); + } + + return frm_len; +} + +static void cfspi_ss_cb(bool assert, struct cfspi_ifc *ifc) +{ + struct cfspi *cfspi = (struct cfspi *)ifc->priv; + + if (!in_interrupt()) + spin_lock(&cfspi->lock); + if (assert) { + set_bit(SPI_SS_ON, &cfspi->state); + set_bit(SPI_XFER, &cfspi->state); + } else { + set_bit(SPI_SS_OFF, &cfspi->state); + } + if (!in_interrupt()) + spin_unlock(&cfspi->lock); + + /* Wake up the xfer thread. */ + wake_up_interruptible(&cfspi->wait); +} + +static void cfspi_xfer_done_cb(struct cfspi_ifc *ifc) +{ + struct cfspi *cfspi = (struct cfspi *)ifc->priv; + + /* Transfer done, complete work queue */ + complete(&cfspi->comp); +} + +static int cfspi_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct cfspi *cfspi = NULL; + unsigned long flags; + if (!dev) + return -EINVAL; + + cfspi = netdev_priv(dev); + + skb_queue_tail(&cfspi->qhead, skb); + + spin_lock_irqsave(&cfspi->lock, flags); + if (!test_and_set_bit(SPI_XFER, &cfspi->state)) { + /* Wake up xfer thread. */ + wake_up_interruptible(&cfspi->wait); + } + spin_unlock_irqrestore(&cfspi->lock, flags); + + /* Send flow off if number of bytes is above high water mark */ + if (!cfspi->flow_off_sent && + cfspi->qhead.qlen > cfspi->qd_high_mark && + cfspi->cfdev.flowctrl) { + cfspi->flow_off_sent = 1; + cfspi->cfdev.flowctrl(cfspi->ndev, 0); + } + + return 0; +} + +int cfspi_rxfrm(struct cfspi *cfspi, u8 *buf, size_t len) +{ + u8 *src = buf; + + caif_assert(buf != NULL); + + do { + int res; + struct sk_buff *skb = NULL; + int spad = 0; + int epad = 0; + u8 *dst = NULL; + int pkt_len = 0; + + /* + * Compute head offset i.e. number of bytes added to + * get the start of the payload aligned. + */ + if (spi_down_head_align) { + spad = 1 + *src; + src += spad; + } + + /* Read length of CAIF frame (little endian). */ + pkt_len = *src; + pkt_len |= ((*(src+1)) << 8) & 0xFF00; + pkt_len += 2; /* Add FCS fields. */ + + /* Get a suitable caif packet and copy in data. */ + + skb = netdev_alloc_skb(cfspi->ndev, pkt_len + 1); + caif_assert(skb != NULL); + + dst = skb_put(skb, pkt_len); + memcpy(dst, src, pkt_len); + src += pkt_len; + + skb->protocol = htons(ETH_P_CAIF); + skb_reset_mac_header(skb); + skb->dev = cfspi->ndev; + + /* + * Push received packet up the stack. + */ + if (!spi_loop) + res = netif_rx_ni(skb); + else + res = cfspi_xmit(skb, cfspi->ndev); + + if (!res) { + cfspi->ndev->stats.rx_packets++; + cfspi->ndev->stats.rx_bytes += pkt_len; + } else + cfspi->ndev->stats.rx_dropped++; + + /* + * Compute tail offset i.e. number of bytes added to + * get the complete CAIF frame aligned. + */ + epad = (pkt_len + spad) & spi_down_tail_align; + src += epad; + } while ((src - buf) < len); + + return src - buf; +} + +static int cfspi_open(struct net_device *dev) +{ + netif_wake_queue(dev); + return 0; +} + +static int cfspi_close(struct net_device *dev) +{ + netif_stop_queue(dev); + return 0; +} +static const struct net_device_ops cfspi_ops = { + .ndo_open = cfspi_open, + .ndo_stop = cfspi_close, + .ndo_start_xmit = cfspi_xmit +}; + +static void cfspi_setup(struct net_device *dev) +{ + struct cfspi *cfspi = netdev_priv(dev); + dev->features = 0; + dev->netdev_ops = &cfspi_ops; + dev->type = ARPHRD_CAIF; + dev->flags = IFF_NOARP | IFF_POINTOPOINT; + dev->tx_queue_len = 0; + dev->mtu = SPI_MAX_PAYLOAD_SIZE; + dev->destructor = free_netdev; + skb_queue_head_init(&cfspi->qhead); + skb_queue_head_init(&cfspi->chead); + cfspi->cfdev.link_select = CAIF_LINK_HIGH_BANDW; + cfspi->cfdev.use_frag = false; + cfspi->cfdev.use_stx = false; + cfspi->cfdev.use_fcs = false; + cfspi->ndev = dev; +} + +int cfspi_spi_probe(struct platform_device *pdev) +{ + struct cfspi *cfspi = NULL; + struct net_device *ndev; + struct cfspi_dev *dev; + int res; + dev = (struct cfspi_dev *)pdev->dev.platform_data; + + ndev = alloc_netdev(sizeof(struct cfspi), + "cfspi%d", cfspi_setup); + if (!dev) + return -ENODEV; + + cfspi = netdev_priv(ndev); + netif_stop_queue(ndev); + cfspi->ndev = ndev; + cfspi->pdev = pdev; + + /* Set flow info */ + cfspi->flow_off_sent = 0; + cfspi->qd_low_mark = LOW_WATER_MARK; + cfspi->qd_high_mark = HIGH_WATER_MARK; + + /* Assign the SPI device. */ + cfspi->dev = dev; + /* Assign the device ifc to this SPI interface. */ + dev->ifc = &cfspi->ifc; + + /* Allocate DMA buffers. */ + cfspi->xfer.va_tx = dma_alloc(&cfspi->xfer.pa_tx); + if (!cfspi->xfer.va_tx) { + printk(KERN_WARNING + "CFSPI: failed to allocate dma TX buffer.\n"); + res = -ENODEV; + goto err_dma_alloc_tx; + } + + cfspi->xfer.va_rx = dma_alloc(&cfspi->xfer.pa_rx); + + if (!cfspi->xfer.va_rx) { + printk(KERN_WARNING + "CFSPI: failed to allocate dma TX buffer.\n"); + res = -ENODEV; + goto err_dma_alloc_rx; + } + + /* Initialize the work queue. */ + INIT_WORK(&cfspi->work, cfspi_xfer); + + /* Initialize spin locks. */ + spin_lock_init(&cfspi->lock); + + /* Initialize flow control state. */ + cfspi->flow_stop = false; + + /* Initialize wait queue. */ + init_waitqueue_head(&cfspi->wait); + + /* Create work thread. */ + cfspi->wq = create_singlethread_workqueue(dev->name); + if (!cfspi->wq) { + printk(KERN_WARNING "CFSPI: failed to create work queue.\n"); + res = -ENODEV; + goto err_create_wq; + } + + /* Initialize work queue. */ + init_completion(&cfspi->comp); + + /* Create debugfs entries. */ + dev_debugfs_add(cfspi); + + /* Set up the ifc. */ + cfspi->ifc.ss_cb = cfspi_ss_cb; + cfspi->ifc.xfer_done_cb = cfspi_xfer_done_cb; + cfspi->ifc.priv = cfspi; + + /* Add CAIF SPI device to list. */ + spin_lock(&cfspi_list_lock); + list_add_tail(&cfspi->list, &cfspi_list); + spin_unlock(&cfspi_list_lock); + + /* Schedule the work queue. */ + queue_work(cfspi->wq, &cfspi->work); + + /* Register network device. */ + res = register_netdev(ndev); + if (res) { + printk(KERN_ERR "CFSPI: Reg. error: %d.\n", res); + goto err_net_reg; + } + return res; + + err_net_reg: + dev_debugfs_rem(cfspi); + set_bit(SPI_TERMINATE, &cfspi->state); + wake_up_interruptible(&cfspi->wait); + destroy_workqueue(cfspi->wq); + err_create_wq: + dma_free(cfspi->xfer.va_rx, cfspi->xfer.pa_rx); + err_dma_alloc_rx: + dma_free(cfspi->xfer.va_tx, cfspi->xfer.pa_tx); + err_dma_alloc_tx: + free_netdev(ndev); + + return res; +} + +int cfspi_spi_remove(struct platform_device *pdev) +{ + struct list_head *list_node; + struct list_head *n; + struct cfspi *cfspi = NULL; + struct cfspi_dev *dev; + + dev = (struct cfspi_dev *)pdev->dev.platform_data; + spin_lock(&cfspi_list_lock); + list_for_each_safe(list_node, n, &cfspi_list) { + cfspi = list_entry(list_node, struct cfspi, list); + /* Find the corresponding device. */ + if (cfspi->dev == dev) { + /* Remove from list. */ + list_del(list_node); + /* Free DMA buffers. */ + dma_free(cfspi->xfer.va_rx, cfspi->xfer.pa_rx); + dma_free(cfspi->xfer.va_tx, cfspi->xfer.pa_tx); + set_bit(SPI_TERMINATE, &cfspi->state); + wake_up_interruptible(&cfspi->wait); + destroy_workqueue(cfspi->wq); + /* Destroy debugfs directory and files. */ + dev_debugfs_rem(cfspi); + unregister_netdev(cfspi->ndev); + spin_unlock(&cfspi_list_lock); + return 0; + } + } + spin_unlock(&cfspi_list_lock); + return -ENODEV; +} + +static void __exit cfspi_exit_module(void) +{ + struct list_head *list_node; + struct list_head *n; + struct cfspi *cfspi = NULL; + + list_for_each_safe(list_node, n, &cfspi_list) { + cfspi = list_entry(list_node, struct cfspi, list); + platform_device_unregister(cfspi->pdev); + } + + /* Destroy sysfs files. */ + driver_remove_file(&cfspi_spi_driver.driver, + &driver_attr_up_head_align); + driver_remove_file(&cfspi_spi_driver.driver, + &driver_attr_up_tail_align); + driver_remove_file(&cfspi_spi_driver.driver, + &driver_attr_down_head_align); + driver_remove_file(&cfspi_spi_driver.driver, + &driver_attr_down_tail_align); + driver_remove_file(&cfspi_spi_driver.driver, &driver_attr_frame_align); + /* Unregister platform driver. */ + platform_driver_unregister(&cfspi_spi_driver); + /* Destroy debugfs root directory. */ + driver_debugfs_remove(); +} + +static int __init cfspi_init_module(void) +{ + int result; + + /* Initialize spin lock. */ + spin_lock_init(&cfspi_list_lock); + + /* Register platform driver. */ + result = platform_driver_register(&cfspi_spi_driver); + if (result) { + printk(KERN_ERR "Could not register platform SPI driver.\n"); + goto err_dev_register; + } + + /* Create sysfs files. */ + result = + driver_create_file(&cfspi_spi_driver.driver, + &driver_attr_up_head_align); + if (result) { + printk(KERN_ERR "Sysfs creation failed 1.\n"); + goto err_create_up_head_align; + } + + result = + driver_create_file(&cfspi_spi_driver.driver, + &driver_attr_up_tail_align); + if (result) { + printk(KERN_ERR "Sysfs creation failed 2.\n"); + goto err_create_up_tail_align; + } + + result = + driver_create_file(&cfspi_spi_driver.driver, + &driver_attr_down_head_align); + if (result) { + printk(KERN_ERR "Sysfs creation failed 3.\n"); + goto err_create_down_head_align; + } + + result = + driver_create_file(&cfspi_spi_driver.driver, + &driver_attr_down_tail_align); + if (result) { + printk(KERN_ERR "Sysfs creation failed 4.\n"); + goto err_create_down_tail_align; + } + + result = + driver_create_file(&cfspi_spi_driver.driver, + &driver_attr_frame_align); + if (result) { + printk(KERN_ERR "Sysfs creation failed 5.\n"); + goto err_create_frame_align; + } + driver_debugfs_create(); + return result; + + err_create_frame_align: + driver_remove_file(&cfspi_spi_driver.driver, + &driver_attr_down_tail_align); + err_create_down_tail_align: + driver_remove_file(&cfspi_spi_driver.driver, + &driver_attr_down_head_align); + err_create_down_head_align: + driver_remove_file(&cfspi_spi_driver.driver, + &driver_attr_up_tail_align); + err_create_up_tail_align: + driver_remove_file(&cfspi_spi_driver.driver, + &driver_attr_up_head_align); + err_create_up_head_align: + err_dev_register: + return result; +} + +module_init(cfspi_init_module); +module_exit(cfspi_exit_module); diff --git a/drivers/net/caif/caif_spi_slave.c b/drivers/net/caif/caif_spi_slave.c new file mode 100644 index 00000000000..077ccf840ed --- /dev/null +++ b/drivers/net/caif/caif_spi_slave.c @@ -0,0 +1,252 @@ +/* + * Copyright (C) ST-Ericsson AB 2010 + * Contact: Sjur Brendeland / sjur.brandeland@stericsson.com + * Author: Daniel Martensson / Daniel.Martensson@stericsson.com + * License terms: GNU General Public License (GPL) version 2. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifndef CONFIG_CAIF_SPI_SYNC +#define SPI_DATA_POS SPI_CMD_SZ +static inline int forward_to_spi_cmd(struct cfspi *cfspi) +{ + return cfspi->rx_cpck_len; +} +#else +#define SPI_DATA_POS 0 +static inline int forward_to_spi_cmd(struct cfspi *cfspi) +{ + return 0; +} +#endif + +int spi_frm_align = 2; +int spi_up_head_align = 1; +int spi_up_tail_align; +int spi_down_head_align = 3; +int spi_down_tail_align = 1; + +#ifdef CONFIG_DEBUG_FS +static inline void debugfs_store_prev(struct cfspi *cfspi) +{ + /* Store previous command for debugging reasons.*/ + cfspi->pcmd = cfspi->cmd; + /* Store previous transfer. */ + cfspi->tx_ppck_len = cfspi->tx_cpck_len; + cfspi->rx_ppck_len = cfspi->rx_cpck_len; +} +#else +static inline void debugfs_store_prev(struct cfspi *cfspi) +{ +} +#endif + +void cfspi_xfer(struct work_struct *work) +{ + struct cfspi *cfspi; + u8 *ptr = NULL; + unsigned long flags; + int ret; + cfspi = container_of(work, struct cfspi, work); + + /* Initialize state. */ + cfspi->cmd = SPI_CMD_EOT; + + for (;;) { + + cfspi_dbg_state(cfspi, CFSPI_STATE_WAITING); + + /* Wait for master talk or transmit event. */ + wait_event_interruptible(cfspi->wait, + test_bit(SPI_XFER, &cfspi->state) || + test_bit(SPI_TERMINATE, &cfspi->state)); + + if (test_bit(SPI_TERMINATE, &cfspi->state)) + return; + +#if CFSPI_DBG_PREFILL + /* Prefill buffers for easier debugging. */ + memset(cfspi->xfer.va_tx, 0xFF, SPI_DMA_BUF_LEN); + memset(cfspi->xfer.va_rx, 0xFF, SPI_DMA_BUF_LEN); +#endif /* CFSPI_DBG_PREFILL */ + + cfspi_dbg_state(cfspi, CFSPI_STATE_AWAKE); + + /* Check whether we have a committed frame. */ + if (cfspi->tx_cpck_len) { + int len; + + cfspi_dbg_state(cfspi, CFSPI_STATE_FETCH_PKT); + + /* Copy commited SPI frames after the SPI indication. */ + ptr = (u8 *) cfspi->xfer.va_tx; + ptr += SPI_IND_SZ; + len = cfspi_xmitfrm(cfspi, ptr, cfspi->tx_cpck_len); + WARN_ON(len != cfspi->tx_cpck_len); + } + + cfspi_dbg_state(cfspi, CFSPI_STATE_GET_NEXT); + + /* Get length of next frame to commit. */ + cfspi->tx_npck_len = cfspi_xmitlen(cfspi); + + WARN_ON(cfspi->tx_npck_len > SPI_DMA_BUF_LEN); + + /* + * Add indication and length at the beginning of the frame, + * using little endian. + */ + ptr = (u8 *) cfspi->xfer.va_tx; + *ptr++ = SPI_CMD_IND; + *ptr++ = (SPI_CMD_IND & 0xFF00) >> 8; + *ptr++ = cfspi->tx_npck_len & 0x00FF; + *ptr++ = (cfspi->tx_npck_len & 0xFF00) >> 8; + + /* Calculate length of DMAs. */ + cfspi->xfer.tx_dma_len = cfspi->tx_cpck_len + SPI_IND_SZ; + cfspi->xfer.rx_dma_len = cfspi->rx_cpck_len + SPI_CMD_SZ; + + /* Add SPI TX frame alignment padding, if necessary. */ + if (cfspi->tx_cpck_len && + (cfspi->xfer.tx_dma_len % spi_frm_align)) { + + cfspi->xfer.tx_dma_len += spi_frm_align - + (cfspi->xfer.tx_dma_len % spi_frm_align); + } + + /* Add SPI RX frame alignment padding, if necessary. */ + if (cfspi->rx_cpck_len && + (cfspi->xfer.rx_dma_len % spi_frm_align)) { + + cfspi->xfer.rx_dma_len += spi_frm_align - + (cfspi->xfer.rx_dma_len % spi_frm_align); + } + + cfspi_dbg_state(cfspi, CFSPI_STATE_INIT_XFER); + + /* Start transfer. */ + ret = cfspi->dev->init_xfer(&cfspi->xfer, cfspi->dev); + WARN_ON(ret); + + cfspi_dbg_state(cfspi, CFSPI_STATE_WAIT_ACTIVE); + + /* + * TODO: We might be able to make an assumption if this is the + * first loop. Make sure that minimum toggle time is respected. + */ + udelay(MIN_TRANSITION_TIME_USEC); + + cfspi_dbg_state(cfspi, CFSPI_STATE_SIG_ACTIVE); + + /* Signal that we are ready to recieve data. */ + cfspi->dev->sig_xfer(true, cfspi->dev); + + cfspi_dbg_state(cfspi, CFSPI_STATE_WAIT_XFER_DONE); + + /* Wait for transfer completion. */ + wait_for_completion(&cfspi->comp); + + cfspi_dbg_state(cfspi, CFSPI_STATE_XFER_DONE); + + if (cfspi->cmd == SPI_CMD_EOT) { + /* + * Clear the master talk bit. A xfer is always at + * least two bursts. + */ + clear_bit(SPI_SS_ON, &cfspi->state); + } + + cfspi_dbg_state(cfspi, CFSPI_STATE_WAIT_INACTIVE); + + /* Make sure that the minimum toggle time is respected. */ + if (SPI_XFER_TIME_USEC(cfspi->xfer.tx_dma_len, + cfspi->dev->clk_mhz) < + MIN_TRANSITION_TIME_USEC) { + + udelay(MIN_TRANSITION_TIME_USEC - + SPI_XFER_TIME_USEC + (cfspi->xfer.tx_dma_len, cfspi->dev->clk_mhz)); + } + + cfspi_dbg_state(cfspi, CFSPI_STATE_SIG_INACTIVE); + + /* De-assert transfer signal. */ + cfspi->dev->sig_xfer(false, cfspi->dev); + + /* Check whether we received a CAIF packet. */ + if (cfspi->rx_cpck_len) { + int len; + + cfspi_dbg_state(cfspi, CFSPI_STATE_DELIVER_PKT); + + /* Parse SPI frame. */ + ptr = ((u8 *)(cfspi->xfer.va_rx + SPI_DATA_POS)); + + len = cfspi_rxfrm(cfspi, ptr, cfspi->rx_cpck_len); + WARN_ON(len != cfspi->rx_cpck_len); + } + + /* Check the next SPI command and length. */ + ptr = (u8 *) cfspi->xfer.va_rx; + + ptr += forward_to_spi_cmd(cfspi); + + cfspi->cmd = *ptr++; + cfspi->cmd |= ((*ptr++) << 8) & 0xFF00; + cfspi->rx_npck_len = *ptr++; + cfspi->rx_npck_len |= ((*ptr++) << 8) & 0xFF00; + + WARN_ON(cfspi->rx_npck_len > SPI_DMA_BUF_LEN); + WARN_ON(cfspi->cmd > SPI_CMD_EOT); + + debugfs_store_prev(cfspi); + + /* Check whether the master issued an EOT command. */ + if (cfspi->cmd == SPI_CMD_EOT) { + /* Reset state. */ + cfspi->tx_cpck_len = 0; + cfspi->rx_cpck_len = 0; + } else { + /* Update state. */ + cfspi->tx_cpck_len = cfspi->tx_npck_len; + cfspi->rx_cpck_len = cfspi->rx_npck_len; + } + + /* + * Check whether we need to clear the xfer bit. + * Spin lock needed for packet insertion. + * Test and clear of different bits + * are not supported. + */ + spin_lock_irqsave(&cfspi->lock, flags); + if (cfspi->cmd == SPI_CMD_EOT && !cfspi_xmitlen(cfspi) + && !test_bit(SPI_SS_ON, &cfspi->state)) + clear_bit(SPI_XFER, &cfspi->state); + + spin_unlock_irqrestore(&cfspi->lock, flags); + } +} + +struct platform_driver cfspi_spi_driver = { + .probe = cfspi_spi_probe, + .remove = cfspi_spi_remove, + .driver = { + .name = "cfspi_sspi", + .owner = THIS_MODULE, + }, +}; diff --git a/include/net/caif/caif_spi.h b/include/net/caif/caif_spi.h new file mode 100644 index 00000000000..ce4570dff02 --- /dev/null +++ b/include/net/caif/caif_spi.h @@ -0,0 +1,153 @@ +/* + * Copyright (C) ST-Ericsson AB 2010 + * Author: Daniel Martensson / Daniel.Martensson@stericsson.com + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef CAIF_SPI_H_ +#define CAIF_SPI_H_ + +#include + +#define SPI_CMD_WR 0x00 +#define SPI_CMD_RD 0x01 +#define SPI_CMD_EOT 0x02 +#define SPI_CMD_IND 0x04 + +#define SPI_DMA_BUF_LEN 8192 + +#define WL_SZ 2 /* 16 bits. */ +#define SPI_CMD_SZ 4 /* 32 bits. */ +#define SPI_IND_SZ 4 /* 32 bits. */ + +#define SPI_XFER 0 +#define SPI_SS_ON 1 +#define SPI_SS_OFF 2 +#define SPI_TERMINATE 3 + +/* Minimum time between different levels is 50 microseconds. */ +#define MIN_TRANSITION_TIME_USEC 50 + +/* Defines for calculating duration of SPI transfers for a particular + * number of bytes. + */ +#define SPI_MASTER_CLK_MHZ 13 +#define SPI_XFER_TIME_USEC(bytes, clk) (((bytes) * 8) / clk) + +/* Normally this should be aligned on the modem in order to benefit from full + * duplex transfers. However a size of 8188 provokes errors when running with + * the modem. These errors occur when packet sizes approaches 4 kB of data. + */ +#define CAIF_MAX_SPI_FRAME 4092 + +/* Maximum number of uplink CAIF frames that can reside in the same SPI frame. + * This number should correspond with the modem setting. The application side + * CAIF accepts any number of embedded downlink CAIF frames. + */ +#define CAIF_MAX_SPI_PKTS 9 + +/* Decides if SPI buffers should be prefilled with 0xFF pattern for easier + * debugging. Both TX and RX buffers will be filled before the transfer. + */ +#define CFSPI_DBG_PREFILL 0 + +/* Structure describing a SPI transfer. */ +struct cfspi_xfer { + u16 tx_dma_len; + u16 rx_dma_len; + void *va_tx; + dma_addr_t pa_tx; + void *va_rx; + dma_addr_t pa_rx; +}; + +/* Structure implemented by the SPI interface. */ +struct cfspi_ifc { + void (*ss_cb) (bool assert, struct cfspi_ifc *ifc); + void (*xfer_done_cb) (struct cfspi_ifc *ifc); + void *priv; +}; + +/* Structure implemented by SPI clients. */ +struct cfspi_dev { + int (*init_xfer) (struct cfspi_xfer *xfer, struct cfspi_dev *dev); + void (*sig_xfer) (bool xfer, struct cfspi_dev *dev); + struct cfspi_ifc *ifc; + char *name; + u32 clk_mhz; + void *priv; +}; + +/* Enumeration describing the CAIF SPI state. */ +enum cfspi_state { + CFSPI_STATE_WAITING = 0, + CFSPI_STATE_AWAKE, + CFSPI_STATE_FETCH_PKT, + CFSPI_STATE_GET_NEXT, + CFSPI_STATE_INIT_XFER, + CFSPI_STATE_WAIT_ACTIVE, + CFSPI_STATE_SIG_ACTIVE, + CFSPI_STATE_WAIT_XFER_DONE, + CFSPI_STATE_XFER_DONE, + CFSPI_STATE_WAIT_INACTIVE, + CFSPI_STATE_SIG_INACTIVE, + CFSPI_STATE_DELIVER_PKT, + CFSPI_STATE_MAX, +}; + +/* Structure implemented by SPI physical interfaces. */ +struct cfspi { + struct caif_dev_common cfdev; + struct net_device *ndev; + struct platform_device *pdev; + struct sk_buff_head qhead; + struct sk_buff_head chead; + u16 cmd; + u16 tx_cpck_len; + u16 tx_npck_len; + u16 rx_cpck_len; + u16 rx_npck_len; + struct cfspi_ifc ifc; + struct cfspi_xfer xfer; + struct cfspi_dev *dev; + unsigned long state; + struct work_struct work; + struct workqueue_struct *wq; + struct list_head list; + int flow_off_sent; + u32 qd_low_mark; + u32 qd_high_mark; + struct completion comp; + wait_queue_head_t wait; + spinlock_t lock; + bool flow_stop; +#ifdef CONFIG_DEBUG_FS + enum cfspi_state dbg_state; + u16 pcmd; + u16 tx_ppck_len; + u16 rx_ppck_len; + struct dentry *dbgfs_dir; + struct dentry *dbgfs_state; + struct dentry *dbgfs_frame; +#endif /* CONFIG_DEBUG_FS */ +}; + +extern int spi_frm_align; +extern int spi_up_head_align; +extern int spi_up_tail_align; +extern int spi_down_head_align; +extern int spi_down_tail_align; +extern struct platform_driver cfspi_spi_driver; + +void cfspi_dbg_state(struct cfspi *cfspi, int state); +int cfspi_xmitfrm(struct cfspi *cfspi, u8 *buf, size_t len); +int cfspi_xmitlen(struct cfspi *cfspi); +int cfspi_rxfrm(struct cfspi *cfspi, u8 *buf, size_t len); +int cfspi_spi_remove(struct platform_device *pdev); +int cfspi_spi_probe(struct platform_device *pdev); +int cfspi_xmitfrm(struct cfspi *cfspi, u8 *buf, size_t len); +int cfspi_xmitlen(struct cfspi *cfspi); +int cfspi_rxfrm(struct cfspi *cfspi, u8 *buf, size_t len); +void cfspi_xfer(struct work_struct *work); + +#endif /* CAIF_SPI_H_ */ -- cgit v1.2.3-70-g09d2