From ff06d611a31c4b687c7859e3c7516a38194d4d25 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Fri, 28 Mar 2014 14:14:45 +0400 Subject: can: mcp251x: Improve mcp251x_hw_reset() The MCP251x utilizes an oscillator startup timer (OST), which holds the chip in reset, to insure that the oscillator has stabilized before the internal state machine begins to operate. The OST maintains reset for the first 128 OSC clock cycles after power up or reset. So, this patch removes unnecessary loops and reduce delay for power on and reset to the safe value. Signed-off-by: Alexander Shiyan Tested-by: Alexander Shiyan Signed-off-by: Marc Kleine-Budde --- drivers/net/can/mcp251x.c | 35 ++++++++++++++++------------------- 1 file changed, 16 insertions(+), 19 deletions(-) (limited to 'drivers/net/can') diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c index 356d3da0c5e..9a8fd945697 100644 --- a/drivers/net/can/mcp251x.c +++ b/drivers/net/can/mcp251x.c @@ -214,6 +214,8 @@ #define TX_ECHO_SKB_MAX 1 +#define MCP251X_OST_DELAY_MS (5) + #define DEVICE_NAME "mcp251x" static int mcp251x_enable_dma; /* Enable SPI DMA. Default: 0 (Off) */ @@ -624,28 +626,24 @@ static int mcp251x_setup(struct net_device *net, struct mcp251x_priv *priv, static int mcp251x_hw_reset(struct spi_device *spi) { struct mcp251x_priv *priv = spi_get_drvdata(spi); + u8 reg; int ret; - unsigned long timeout; + + /* Wait for oscillator startup timer after power up */ + mdelay(MCP251X_OST_DELAY_MS); priv->spi_tx_buf[0] = INSTRUCTION_RESET; - ret = spi_write(spi, priv->spi_tx_buf, 1); - if (ret) { - dev_err(&spi->dev, "reset failed: ret = %d\n", ret); - return -EIO; - } + ret = mcp251x_spi_trans(spi, 1); + if (ret) + return ret; + + /* Wait for oscillator startup timer after reset */ + mdelay(MCP251X_OST_DELAY_MS); + + reg = mcp251x_read_reg(spi, CANSTAT); + if ((reg & CANCTRL_REQOP_MASK) != CANCTRL_REQOP_CONF) + return -ENODEV; - /* Wait for reset to finish */ - timeout = jiffies + HZ; - mdelay(10); - while ((mcp251x_read_reg(spi, CANSTAT) & CANCTRL_REQOP_MASK) - != CANCTRL_REQOP_CONF) { - schedule(); - if (time_after(jiffies, timeout)) { - dev_err(&spi->dev, "MCP251x didn't" - " enter in conf mode after reset\n"); - return -EBUSY; - } - } return 0; } @@ -776,7 +774,6 @@ static void mcp251x_restart_work_handler(struct work_struct *ws) mutex_lock(&priv->mcp_lock); if (priv->after_suspend) { - mdelay(10); mcp251x_hw_reset(spi); mcp251x_setup(net, priv, spi); if (priv->after_suspend & AFTER_SUSPEND_RESTART) { -- cgit v1.2.3-70-g09d2