From 120cd57644f85b280b538ee403423641167913a9 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Thu, 31 Aug 2006 14:27:46 -0700 Subject: e1000: unify WoL capability detection code WoL is constantly giving problems and needed a rewrite. Consolidates all WoL capabilities into a single function, and disables WoL for all other ports on the device except for port A. Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok --- drivers/net/e1000/e1000.h | 3 +- drivers/net/e1000/e1000_ethtool.c | 166 +++++++++++++++++++++----------------- drivers/net/e1000/e1000_main.c | 47 ++++++++--- 3 files changed, 127 insertions(+), 89 deletions(-) (limited to 'drivers/net/e1000') diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index 70ba3783ad8..98afa9c2057 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -246,7 +246,6 @@ struct e1000_adapter { uint32_t bd_number; uint32_t rx_buffer_len; uint32_t wol; - uint32_t ksp3_port_a; uint32_t smartspeed; uint32_t en_mng_pt; uint16_t link_speed; @@ -341,7 +340,9 @@ struct e1000_adapter { boolean_t tso_force; #endif boolean_t smart_power_down; /* phy smart power down */ + boolean_t quad_port_a; unsigned long flags; + uint32_t eeprom_wol; }; enum e1000_state_t { diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index ab2f153d573..04030729882 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -1675,14 +1675,12 @@ e1000_diag_test(struct net_device *netdev, msleep_interruptible(4 * 1000); } -static void -e1000_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) +static int e1000_wol_exclusion(struct e1000_adapter *adapter, struct ethtool_wolinfo *wol) { - struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; + int retval = 1; /* fail by default */ - switch (adapter->hw.device_id) { - case E1000_DEV_ID_82542: + switch (hw->device_id) { case E1000_DEV_ID_82543GC_FIBER: case E1000_DEV_ID_82543GC_COPPER: case E1000_DEV_ID_82544EI_FIBER: @@ -1690,52 +1688,86 @@ e1000_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) case E1000_DEV_ID_82545EM_FIBER: case E1000_DEV_ID_82545EM_COPPER: case E1000_DEV_ID_82546GB_QUAD_COPPER: + case E1000_DEV_ID_82546GB_PCIE: + /* these don't support WoL at all */ wol->supported = 0; - wol->wolopts = 0; - return; - - case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: - /* device id 10B5 port-A supports wol */ - if (!adapter->ksp3_port_a) { - wol->supported = 0; - return; - } - /* KSP3 does not suppport UCAST wake-ups for any interface */ - wol->supported = WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC; - - if (adapter->wol & E1000_WUFC_EX) - DPRINTK(DRV, ERR, "Interface does not support " - "directed (unicast) frame wake-up packets\n"); - wol->wolopts = 0; - goto do_defaults; - + break; case E1000_DEV_ID_82546EB_FIBER: case E1000_DEV_ID_82546GB_FIBER: case E1000_DEV_ID_82571EB_FIBER: - /* Wake events only supported on port A for dual fiber */ + case E1000_DEV_ID_82571EB_SERDES: + case E1000_DEV_ID_82571EB_COPPER: + /* Wake events not supported on port B */ if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1) { wol->supported = 0; - wol->wolopts = 0; - return; + break; } - /* Fall Through */ - + /* return success for non excluded adapter ports */ + retval = 0; + break; + case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: + /* quad port adapters only support WoL on port A */ + if (!adapter->quad_port_a) { + wol->supported = 0; + break; + } + /* return success for non excluded adapter ports */ + retval = 0; + break; default: - wol->supported = WAKE_UCAST | WAKE_MCAST | - WAKE_BCAST | WAKE_MAGIC; - wol->wolopts = 0; + /* dual port cards only support WoL on port A from now on + * unless it was enabled in the eeprom for port B + * so exclude FUNC_1 ports from having WoL enabled */ + if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1 && + !adapter->eeprom_wol) { + wol->supported = 0; + break; + } -do_defaults: - if (adapter->wol & E1000_WUFC_EX) - wol->wolopts |= WAKE_UCAST; - if (adapter->wol & E1000_WUFC_MC) - wol->wolopts |= WAKE_MCAST; - if (adapter->wol & E1000_WUFC_BC) - wol->wolopts |= WAKE_BCAST; - if (adapter->wol & E1000_WUFC_MAG) - wol->wolopts |= WAKE_MAGIC; + retval = 0; + } + + return retval; +} + +static void +e1000_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + + wol->supported = WAKE_UCAST | WAKE_MCAST | + WAKE_BCAST | WAKE_MAGIC; + wol->wolopts = 0; + + /* this function will set ->supported = 0 and return 1 if wol is not + * supported by this hardware */ + if (e1000_wol_exclusion(adapter, wol)) return; + + /* apply any specific unsupported masks here */ + switch (adapter->hw.device_id) { + case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: + /* KSP3 does not suppport UCAST wake-ups */ + wol->supported &= ~WAKE_UCAST; + + if (adapter->wol & E1000_WUFC_EX) + DPRINTK(DRV, ERR, "Interface does not support " + "directed (unicast) frame wake-up packets\n"); + break; + default: + break; } + + if (adapter->wol & E1000_WUFC_EX) + wol->wolopts |= WAKE_UCAST; + if (adapter->wol & E1000_WUFC_MC) + wol->wolopts |= WAKE_MCAST; + if (adapter->wol & E1000_WUFC_BC) + wol->wolopts |= WAKE_BCAST; + if (adapter->wol & E1000_WUFC_MAG) + wol->wolopts |= WAKE_MAGIC; + + return; } static int @@ -1744,52 +1776,36 @@ e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - switch (adapter->hw.device_id) { - case E1000_DEV_ID_82542: - case E1000_DEV_ID_82543GC_FIBER: - case E1000_DEV_ID_82543GC_COPPER: - case E1000_DEV_ID_82544EI_FIBER: - case E1000_DEV_ID_82546EB_QUAD_COPPER: - case E1000_DEV_ID_82546GB_QUAD_COPPER: - case E1000_DEV_ID_82545EM_FIBER: - case E1000_DEV_ID_82545EM_COPPER: + if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) + return -EOPNOTSUPP; + + if (e1000_wol_exclusion(adapter, wol)) return wol->wolopts ? -EOPNOTSUPP : 0; + switch (hw->device_id) { case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: - /* device id 10B5 port-A supports wol */ - if (!adapter->ksp3_port_a) - return wol->wolopts ? -EOPNOTSUPP : 0; - if (wol->wolopts & WAKE_UCAST) { DPRINTK(DRV, ERR, "Interface does not support " "directed (unicast) frame wake-up packets\n"); return -EOPNOTSUPP; } - - case E1000_DEV_ID_82546EB_FIBER: - case E1000_DEV_ID_82546GB_FIBER: - case E1000_DEV_ID_82571EB_FIBER: - /* Wake events only supported on port A for dual fiber */ - if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1) - return wol->wolopts ? -EOPNOTSUPP : 0; - /* Fall Through */ - + break; default: - if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) - return -EOPNOTSUPP; - - adapter->wol = 0; - - if (wol->wolopts & WAKE_UCAST) - adapter->wol |= E1000_WUFC_EX; - if (wol->wolopts & WAKE_MCAST) - adapter->wol |= E1000_WUFC_MC; - if (wol->wolopts & WAKE_BCAST) - adapter->wol |= E1000_WUFC_BC; - if (wol->wolopts & WAKE_MAGIC) - adapter->wol |= E1000_WUFC_MAG; + break; } + /* these settings will always override what we currently have */ + adapter->wol = 0; + + if (wol->wolopts & WAKE_UCAST) + adapter->wol |= E1000_WUFC_EX; + if (wol->wolopts & WAKE_MCAST) + adapter->wol |= E1000_WUFC_MC; + if (wol->wolopts & WAKE_BCAST) + adapter->wol |= E1000_WUFC_BC; + if (wol->wolopts & WAKE_MAGIC) + adapter->wol |= E1000_WUFC_MAG; + return 0; } diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index c128f62fa45..9071b78c77f 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -681,9 +681,9 @@ e1000_probe(struct pci_dev *pdev, unsigned long flash_start, flash_len; static int cards_found = 0; - static int e1000_ksp3_port_a = 0; /* global ksp3 port a indication */ + static int global_quad_port_a = 0; /* global ksp3 port a indication */ int i, err, pci_using_dac; - uint16_t eeprom_data; + uint16_t eeprom_data = 0; uint16_t eeprom_apme_mask = E1000_EEPROM_APME; if ((err = pci_enable_device(pdev))) return err; @@ -786,15 +786,6 @@ e1000_probe(struct pci_dev *pdev, if (e1000_check_phy_reset_block(&adapter->hw)) DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n"); - /* if ksp3, indicate if it's port a being setup */ - if (pdev->device == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 && - e1000_ksp3_port_a == 0) - adapter->ksp3_port_a = 1; - e1000_ksp3_port_a++; - /* Reset for multiple KP3 adapters */ - if (e1000_ksp3_port_a == 4) - e1000_ksp3_port_a = 0; - if (adapter->hw.mac_type >= e1000_82543) { netdev->features = NETIF_F_SG | NETIF_F_HW_CSUM | @@ -913,7 +904,37 @@ e1000_probe(struct pci_dev *pdev, break; } if (eeprom_data & eeprom_apme_mask) - adapter->wol |= E1000_WUFC_MAG; + adapter->eeprom_wol |= E1000_WUFC_MAG; + + /* now that we have the eeprom settings, apply the special cases + * where the eeprom may be wrong or the board simply won't support + * wake on lan on a particular port */ + switch (pdev->device) { + case E1000_DEV_ID_82546GB_PCIE: + adapter->eeprom_wol = 0; + break; + case E1000_DEV_ID_82546EB_FIBER: + case E1000_DEV_ID_82546GB_FIBER: + case E1000_DEV_ID_82571EB_FIBER: + /* Wake events only supported on port A for dual fiber + * regardless of eeprom setting */ + if (E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1) + adapter->eeprom_wol = 0; + break; + case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: + /* if quad port adapter, disable WoL on all but port A */ + if (global_quad_port_a != 0) + adapter->eeprom_wol = 0; + else + adapter->quad_port_a = 1; + /* Reset for multiple quad port adapters */ + if (++global_quad_port_a == 4) + global_quad_port_a = 0; + break; + } + + /* initialize the wol settings based on the eeprom settings */ + adapter->wol = adapter->eeprom_wol; /* print bus type/speed/width info */ { @@ -4635,7 +4656,7 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state) e1000_set_multi(netdev); /* turn on all-multi mode if wake on multicast is enabled */ - if (adapter->wol & E1000_WUFC_MC) { + if (wufc & E1000_WUFC_MC) { rctl = E1000_READ_REG(&adapter->hw, RCTL); rctl |= E1000_RCTL_MPE; E1000_WRITE_REG(&adapter->hw, RCTL, rctl); -- cgit v1.2.3-70-g09d2