From 842ec8b64ac34e9b245da31b4a5a49c3e744a714 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 19 Nov 2009 12:34:40 +0000 Subject: e1000e: read of PHY register may access wrong page on 82578 Remove unnecessary workaround that mistakenly does not perform a page select operation for PHY registers 29 and 30 (assuming these are the PHY debug port address and data registers) on 82578 which can cause reads of the Transmit with No Carrier Sense statistics register on page 778 to be read from an incorrect page. Also error out if the page select operation fails. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/phy.c | 46 ++++++++++++++++++++++------------------------ 1 file changed, 22 insertions(+), 24 deletions(-) (limited to 'drivers/net/e1000e/phy.c') diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 03175b3a2c9..8189d00bfef 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -2658,19 +2658,18 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data, page = 0; if (reg > MAX_PHY_MULTI_PAGE_REG) { - if ((hw->phy.type != e1000_phy_82578) || - ((reg != I82578_ADDR_REG) && - (reg != I82578_ADDR_REG + 1))) { - u32 phy_addr = hw->phy.addr; + u32 phy_addr = hw->phy.addr; - hw->phy.addr = 1; + hw->phy.addr = 1; - /* Page is shifted left, PHY expects (page x 32) */ - ret_val = e1000e_write_phy_reg_mdic(hw, - IGP01E1000_PHY_PAGE_SELECT, - (page << IGP_PAGE_SHIFT)); - hw->phy.addr = phy_addr; - } + /* Page is shifted left, PHY expects (page x 32) */ + ret_val = e1000e_write_phy_reg_mdic(hw, + IGP01E1000_PHY_PAGE_SELECT, + (page << IGP_PAGE_SHIFT)); + hw->phy.addr = phy_addr; + + if (ret_val) + goto out; } ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg, @@ -2678,7 +2677,7 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data, out: /* Revert to MDIO fast mode, if applicable */ if ((hw->phy.type == e1000_phy_82577) && in_slow_mode) - ret_val = e1000_set_mdio_slow_mode_hv(hw, false); + ret_val |= e1000_set_mdio_slow_mode_hv(hw, false); if (!locked) hw->phy.ops.release_phy(hw); @@ -2784,19 +2783,18 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data, } if (reg > MAX_PHY_MULTI_PAGE_REG) { - if ((hw->phy.type != e1000_phy_82578) || - ((reg != I82578_ADDR_REG) && - (reg != I82578_ADDR_REG + 1))) { - u32 phy_addr = hw->phy.addr; + u32 phy_addr = hw->phy.addr; - hw->phy.addr = 1; + hw->phy.addr = 1; - /* Page is shifted left, PHY expects (page x 32) */ - ret_val = e1000e_write_phy_reg_mdic(hw, - IGP01E1000_PHY_PAGE_SELECT, - (page << IGP_PAGE_SHIFT)); - hw->phy.addr = phy_addr; - } + /* Page is shifted left, PHY expects (page x 32) */ + ret_val = e1000e_write_phy_reg_mdic(hw, + IGP01E1000_PHY_PAGE_SELECT, + (page << IGP_PAGE_SHIFT)); + hw->phy.addr = phy_addr; + + if (ret_val) + goto out; } ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg, @@ -2805,7 +2803,7 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data, out: /* Revert to MDIO fast mode, if applicable */ if ((hw->phy.type == e1000_phy_82577) && in_slow_mode) - ret_val = e1000_set_mdio_slow_mode_hv(hw, false); + ret_val |= e1000_set_mdio_slow_mode_hv(hw, false); if (!locked) hw->phy.ops.release_phy(hw); -- cgit v1.2.3-70-g09d2 From 189983d469c6d98e64ddfb9f9ce76725cb082ee5 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 19 Nov 2009 12:36:04 +0000 Subject: e1000e: remove unnecessary 82577 workaround causing link issues A workaround for pre-release versions of 82577 is causing link issues on some switches. The workaround is no longer needed on production parts so remove it. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/phy.c | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'drivers/net/e1000e/phy.c') diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 8189d00bfef..85f955f7041 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -71,7 +71,6 @@ static const u16 e1000_igp_2_cable_length_table[] = #define I82577_CFG_ASSERT_CRS_ON_TX (1 << 15) #define I82577_CFG_ENABLE_DOWNSHIFT (3 << 10) /* auto downshift 100/10 */ #define I82577_CTRL_REG 23 -#define I82577_CTRL_DOWNSHIFT_MASK (7 << 10) /* 82577 specific PHY registers */ #define I82577_PHY_CTRL_2 18 @@ -660,15 +659,6 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw) phy_data |= I82577_CFG_ENABLE_DOWNSHIFT; ret_val = phy->ops.write_phy_reg(hw, I82577_CFG_REG, phy_data); - if (ret_val) - goto out; - - /* Set number of link attempts before downshift */ - ret_val = phy->ops.read_phy_reg(hw, I82577_CTRL_REG, &phy_data); - if (ret_val) - goto out; - phy_data &= ~I82577_CTRL_DOWNSHIFT_MASK; - ret_val = phy->ops.write_phy_reg(hw, I82577_CTRL_REG, phy_data); out: return ret_val; -- cgit v1.2.3-70-g09d2 From 98086a954a75152f8b09c131fa443205bae5fde1 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Fri, 20 Nov 2009 23:23:53 +0000 Subject: e1000e: improper return code signage The e1000_get_cable_length_82577() should return a negative value upon error. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/e1000e/phy.c') diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 03175b3a2c9..95a8196cf44 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -3137,7 +3137,7 @@ s32 e1000_get_cable_length_82577(struct e1000_hw *hw) I82577_DSTATUS_CABLE_LENGTH_SHIFT; if (length == E1000_CABLE_LENGTH_UNDEFINED) - ret_val = E1000_ERR_PHY; + ret_val = -E1000_ERR_PHY; phy->cable_length = length; -- cgit v1.2.3-70-g09d2 From 3bb99fe226ead584a4db674dab546689f705201f Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Fri, 20 Nov 2009 23:25:07 +0000 Subject: e1000e: consolidate two dbug macros into one simpler one This patch depends on a previous one that cleans up redundant #includes. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/82571.c | 40 +++++++------- drivers/net/e1000e/e1000.h | 4 +- drivers/net/e1000e/es2lan.c | 23 ++++---- drivers/net/e1000e/hw.h | 11 ---- drivers/net/e1000e/ich8lan.c | 69 ++++++++++++------------ drivers/net/e1000e/lib.c | 122 +++++++++++++++++++++---------------------- drivers/net/e1000e/netdev.c | 28 ++++------ drivers/net/e1000e/phy.c | 92 ++++++++++++++++---------------- 8 files changed, 183 insertions(+), 206 deletions(-) (limited to 'drivers/net/e1000e/phy.c') diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index 407637f6c33..680b7c70306 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -309,7 +309,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter) * indicates that the bootagent or EFI code has * improperly left this bit enabled */ - hw_dbg(hw, "Please update your 82571 Bootagent\n"); + e_dbg("Please update your 82571 Bootagent\n"); } ew32(SWSM, swsm & ~E1000_SWSM_SMBI); } @@ -483,7 +483,7 @@ static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw) } if (i == sw_timeout) { - hw_dbg(hw, "Driver can't access device - SMBI bit is set.\n"); + e_dbg("Driver can't access device - SMBI bit is set.\n"); hw->dev_spec.e82571.smb_counter++; } /* Get the FW semaphore. */ @@ -501,7 +501,7 @@ static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw) if (i == fw_timeout) { /* Release semaphores */ e1000_put_hw_semaphore_82571(hw); - hw_dbg(hw, "Driver can't access the NVM\n"); + e_dbg("Driver can't access the NVM\n"); return -E1000_ERR_NVM; } @@ -708,7 +708,7 @@ static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset, */ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || (words == 0)) { - hw_dbg(hw, "nvm parameter(s) out of bounds\n"); + e_dbg("nvm parameter(s) out of bounds\n"); return -E1000_ERR_NVM; } @@ -749,7 +749,7 @@ static s32 e1000_get_cfg_done_82571(struct e1000_hw *hw) timeout--; } if (!timeout) { - hw_dbg(hw, "MNG configuration cycle has not completed.\n"); + e_dbg("MNG configuration cycle has not completed.\n"); return -E1000_ERR_RESET; } @@ -848,9 +848,9 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) */ ret_val = e1000e_disable_pcie_master(hw); if (ret_val) - hw_dbg(hw, "PCI-E Master disable polling has failed.\n"); + e_dbg("PCI-E Master disable polling has failed.\n"); - hw_dbg(hw, "Masking off all interrupts\n"); + e_dbg("Masking off all interrupts\n"); ew32(IMC, 0xffffffff); ew32(RCTL, 0); @@ -889,7 +889,7 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) ctrl = er32(CTRL); - hw_dbg(hw, "Issuing a global reset to MAC\n"); + e_dbg("Issuing a global reset to MAC\n"); ew32(CTRL, ctrl | E1000_CTRL_RST); if (hw->nvm.type == e1000_nvm_flash_hw) { @@ -955,12 +955,12 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw) /* Initialize identification LED */ ret_val = e1000e_id_led_init(hw); if (ret_val) { - hw_dbg(hw, "Error initializing identification LED\n"); + e_dbg("Error initializing identification LED\n"); return ret_val; } /* Disabling VLAN filtering */ - hw_dbg(hw, "Initializing the IEEE VLAN\n"); + e_dbg("Initializing the IEEE VLAN\n"); e1000e_clear_vfta(hw); /* Setup the receive address. */ @@ -974,7 +974,7 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw) e1000e_init_rx_addrs(hw, rar_count); /* Zero out the Multicast HASH table */ - hw_dbg(hw, "Zeroing the MTA\n"); + e_dbg("Zeroing the MTA\n"); for (i = 0; i < mac->mta_reg_count; i++) E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0); @@ -1383,7 +1383,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) */ mac->serdes_link_state = e1000_serdes_link_autoneg_progress; - hw_dbg(hw, "AN_UP -> AN_PROG\n"); + e_dbg("AN_UP -> AN_PROG\n"); } break; @@ -1401,7 +1401,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) (ctrl & ~E1000_CTRL_SLU)); mac->serdes_link_state = e1000_serdes_link_autoneg_progress; - hw_dbg(hw, "FORCED_UP -> AN_PROG\n"); + e_dbg("FORCED_UP -> AN_PROG\n"); } break; @@ -1415,7 +1415,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) if (status & E1000_STATUS_LU) { mac->serdes_link_state = e1000_serdes_link_autoneg_complete; - hw_dbg(hw, "AN_PROG -> AN_UP\n"); + e_dbg("AN_PROG -> AN_UP\n"); } else { /* * Disable autoneg, force link up and @@ -1430,12 +1430,12 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) ret_val = e1000e_config_fc_after_link_up(hw); if (ret_val) { - hw_dbg(hw, "Error config flow control\n"); + e_dbg("Error config flow control\n"); break; } mac->serdes_link_state = e1000_serdes_link_forced_up; - hw_dbg(hw, "AN_PROG -> FORCED_UP\n"); + e_dbg("AN_PROG -> FORCED_UP\n"); } mac->serdes_has_link = true; break; @@ -1450,14 +1450,14 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) (ctrl & ~E1000_CTRL_SLU)); mac->serdes_link_state = e1000_serdes_link_autoneg_progress; - hw_dbg(hw, "DOWN -> AN_PROG\n"); + e_dbg("DOWN -> AN_PROG\n"); break; } } else { if (!(rxcw & E1000_RXCW_SYNCH)) { mac->serdes_has_link = false; mac->serdes_link_state = e1000_serdes_link_down; - hw_dbg(hw, "ANYSTATE -> DOWN\n"); + e_dbg("ANYSTATE -> DOWN\n"); } else { /* * We have sync, and can tolerate one @@ -1469,7 +1469,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) if (rxcw & E1000_RXCW_IV) { mac->serdes_link_state = e1000_serdes_link_down; mac->serdes_has_link = false; - hw_dbg(hw, "ANYSTATE -> DOWN\n"); + e_dbg("ANYSTATE -> DOWN\n"); } } } @@ -1491,7 +1491,7 @@ static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data) ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + e_dbg("NVM Read Error\n"); return ret_val; } diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index ac5d8552747..dac00a02383 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -48,9 +48,9 @@ struct e1000_info; #ifdef DEBUG #define e_dbg(format, arg...) \ - e_printk(KERN_DEBUG , adapter, format, ## arg) + e_printk(KERN_DEBUG , hw->adapter, format, ## arg) #else -#define e_dbg(format, arg...) do { (void)(adapter); } while (0) +#define e_dbg(format, arg...) do { (void)(hw); } while (0) #endif #define e_err(format, arg...) \ diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c index 6fd46f5f8a3..f5601c5ff7a 100644 --- a/drivers/net/e1000e/es2lan.c +++ b/drivers/net/e1000e/es2lan.c @@ -394,8 +394,7 @@ static s32 e1000_acquire_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask) } if (i == timeout) { - hw_dbg(hw, - "Driver can't access resource, SW_FW_SYNC timeout.\n"); + e_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n"); return -E1000_ERR_SWFW_SYNC; } @@ -597,7 +596,7 @@ static s32 e1000_get_cfg_done_80003es2lan(struct e1000_hw *hw) timeout--; } if (!timeout) { - hw_dbg(hw, "MNG configuration cycle has not completed.\n"); + e_dbg("MNG configuration cycle has not completed.\n"); return -E1000_ERR_RESET; } @@ -630,7 +629,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw) if (ret_val) return ret_val; - hw_dbg(hw, "GG82563 PSCR: %X\n", phy_data); + e_dbg("GG82563 PSCR: %X\n", phy_data); ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data); if (ret_val) @@ -648,7 +647,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw) udelay(1); if (hw->phy.autoneg_wait_to_complete) { - hw_dbg(hw, "Waiting for forced speed/duplex link " + e_dbg("Waiting for forced speed/duplex link " "on GG82563 phy.\n"); ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT, @@ -771,9 +770,9 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw) */ ret_val = e1000e_disable_pcie_master(hw); if (ret_val) - hw_dbg(hw, "PCI-E Master disable polling has failed.\n"); + e_dbg("PCI-E Master disable polling has failed.\n"); - hw_dbg(hw, "Masking off all interrupts\n"); + e_dbg("Masking off all interrupts\n"); ew32(IMC, 0xffffffff); ew32(RCTL, 0); @@ -785,7 +784,7 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw) ctrl = er32(CTRL); ret_val = e1000_acquire_phy_80003es2lan(hw); - hw_dbg(hw, "Issuing a global reset to MAC\n"); + e_dbg("Issuing a global reset to MAC\n"); ew32(CTRL, ctrl | E1000_CTRL_RST); e1000_release_phy_80003es2lan(hw); @@ -820,19 +819,19 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw) /* Initialize identification LED */ ret_val = e1000e_id_led_init(hw); if (ret_val) { - hw_dbg(hw, "Error initializing identification LED\n"); + e_dbg("Error initializing identification LED\n"); return ret_val; } /* Disabling VLAN filtering */ - hw_dbg(hw, "Initializing the IEEE VLAN\n"); + e_dbg("Initializing the IEEE VLAN\n"); e1000e_clear_vfta(hw); /* Setup the receive address. */ e1000e_init_rx_addrs(hw, mac->rar_entry_count); /* Zero out the Multicast HASH table */ - hw_dbg(hw, "Zeroing the MTA\n"); + e_dbg("Zeroing the MTA\n"); for (i = 0; i < mac->mta_reg_count; i++) E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0); @@ -989,7 +988,7 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw) /* SW Reset the PHY so all changes take effect */ ret_val = e1000e_commit_phy(hw); if (ret_val) { - hw_dbg(hw, "Error Resetting the PHY\n"); + e_dbg("Error Resetting the PHY\n"); return ret_val; } diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index aaea41ef794..44808b053fc 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -925,15 +925,4 @@ struct e1000_hw { } dev_spec; }; -#ifdef DEBUG -#define hw_dbg(hw, format, arg...) \ - printk(KERN_DEBUG "%s: " format, e1000e_get_hw_dev_name(hw), ##arg) -#else -static inline int __attribute__ ((format (printf, 2, 3))) -hw_dbg(struct e1000_hw *hw, const char *format, ...) -{ - return 0; -} -#endif - #endif diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index bef5e3333f2..101a2714467 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -368,7 +368,7 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw) /* Can't read flash registers if the register set isn't mapped. */ if (!hw->flash_address) { - hw_dbg(hw, "ERROR: Flash registers not mapped\n"); + e_dbg("ERROR: Flash registers not mapped\n"); return -E1000_ERR_CONFIG; } @@ -550,7 +550,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) */ ret_val = e1000e_config_fc_after_link_up(hw); if (ret_val) - hw_dbg(hw, "Error configuring flow control\n"); + e_dbg("Error configuring flow control\n"); out: return ret_val; @@ -644,7 +644,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) } if (!timeout) { - hw_dbg(hw, "SW/FW/HW has locked the resource for too long.\n"); + e_dbg("SW/FW/HW has locked the resource for too long.\n"); ret_val = -E1000_ERR_CONFIG; goto out; } @@ -664,7 +664,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) } if (!timeout) { - hw_dbg(hw, "Failed to acquire the semaphore.\n"); + e_dbg("Failed to acquire the semaphore.\n"); extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG; ew32(EXTCNF_CTRL, extcnf_ctrl); ret_val = -E1000_ERR_CONFIG; @@ -773,12 +773,12 @@ static s32 e1000_phy_force_speed_duplex_ich8lan(struct e1000_hw *hw) if (ret_val) return ret_val; - hw_dbg(hw, "IFE PMC: %X\n", data); + e_dbg("IFE PMC: %X\n", data); udelay(1); if (phy->autoneg_wait_to_complete) { - hw_dbg(hw, "Waiting for forced speed/duplex link on IFE phy.\n"); + e_dbg("Waiting for forced speed/duplex link on IFE phy.\n"); ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT, @@ -788,7 +788,7 @@ static s32 e1000_phy_force_speed_duplex_ich8lan(struct e1000_hw *hw) return ret_val; if (!link) - hw_dbg(hw, "Link taking longer than expected.\n"); + e_dbg("Link taking longer than expected.\n"); /* Try once more */ ret_val = e1000e_phy_has_link_generic(hw, @@ -1203,7 +1203,7 @@ static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw) * leave the PHY in a bad state possibly resulting in no link. */ if (loop == 0) - hw_dbg(hw, "LAN_INIT_DONE not set, increase timeout\n"); + e_dbg("LAN_INIT_DONE not set, increase timeout\n"); /* Clear the Init Done bit for the next init event */ data = er32(STATUS); @@ -1274,7 +1274,7 @@ static s32 e1000_get_phy_info_ife_ich8lan(struct e1000_hw *hw) return ret_val; if (!link) { - hw_dbg(hw, "Phy info is only valid if link is up\n"); + e_dbg("Phy info is only valid if link is up\n"); return -E1000_ERR_CONFIG; } @@ -1604,7 +1604,7 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank) return 0; } - hw_dbg(hw, "Unable to determine valid NVM bank via EEC - " + e_dbg("Unable to determine valid NVM bank via EEC - " "reading flash signature\n"); /* fall-thru */ default: @@ -1634,7 +1634,7 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank) return 0; } - hw_dbg(hw, "ERROR: No valid NVM bank present\n"); + e_dbg("ERROR: No valid NVM bank present\n"); return -E1000_ERR_NVM; } @@ -1662,7 +1662,7 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) || (words == 0)) { - hw_dbg(hw, "nvm parameter(s) out of bounds\n"); + e_dbg("nvm parameter(s) out of bounds\n"); ret_val = -E1000_ERR_NVM; goto out; } @@ -1671,7 +1671,7 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank); if (ret_val) { - hw_dbg(hw, "Could not detect valid bank, assuming bank 0\n"); + e_dbg("Could not detect valid bank, assuming bank 0\n"); bank = 0; } @@ -1697,7 +1697,7 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, out: if (ret_val) - hw_dbg(hw, "NVM read error: %d\n", ret_val); + e_dbg("NVM read error: %d\n", ret_val); return ret_val; } @@ -1719,7 +1719,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) /* Check if the flash descriptor is valid */ if (hsfsts.hsf_status.fldesvalid == 0) { - hw_dbg(hw, "Flash descriptor invalid. " + e_dbg("Flash descriptor invalid. " "SW Sequencing must be used."); return -E1000_ERR_NVM; } @@ -1769,7 +1769,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) hsfsts.hsf_status.flcdone = 1; ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval); } else { - hw_dbg(hw, "Flash controller busy, cannot get access"); + e_dbg("Flash controller busy, cannot get access"); } } @@ -1919,7 +1919,7 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, /* Repeat for some time before giving up. */ continue; } else if (hsfsts.hsf_status.flcdone == 0) { - hw_dbg(hw, "Timeout error - flash cycle " + e_dbg("Timeout error - flash cycle " "did not complete."); break; } @@ -1947,7 +1947,7 @@ static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) || (words == 0)) { - hw_dbg(hw, "nvm parameter(s) out of bounds\n"); + e_dbg("nvm parameter(s) out of bounds\n"); return -E1000_ERR_NVM; } @@ -1998,7 +1998,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) */ ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank); if (ret_val) { - hw_dbg(hw, "Could not detect valid bank, assuming bank 0\n"); + e_dbg("Could not detect valid bank, assuming bank 0\n"); bank = 0; } @@ -2072,7 +2072,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) */ if (ret_val) { /* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */ - hw_dbg(hw, "Flash commit failed.\n"); + e_dbg("Flash commit failed.\n"); nvm->ops.release_nvm(hw); goto out; } @@ -2128,7 +2128,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) out: if (ret_val) - hw_dbg(hw, "NVM update error: %d\n", ret_val); + e_dbg("NVM update error: %d\n", ret_val); return ret_val; } @@ -2278,7 +2278,7 @@ static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, /* Repeat for some time before giving up. */ continue; if (hsfsts.hsf_status.flcdone == 0) { - hw_dbg(hw, "Timeout error - flash cycle " + e_dbg("Timeout error - flash cycle " "did not complete."); break; } @@ -2323,7 +2323,7 @@ static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw, return ret_val; for (program_retries = 0; program_retries < 100; program_retries++) { - hw_dbg(hw, "Retrying Byte %2.2X at offset %u\n", byte, offset); + e_dbg("Retrying Byte %2.2X at offset %u\n", byte, offset); udelay(100); ret_val = e1000_write_flash_byte_ich8lan(hw, offset, byte); if (!ret_val) @@ -2458,7 +2458,7 @@ static s32 e1000_valid_led_default_ich8lan(struct e1000_hw *hw, u16 *data) ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + e_dbg("NVM Read Error\n"); return ret_val; } @@ -2588,10 +2588,10 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) */ ret_val = e1000e_disable_pcie_master(hw); if (ret_val) { - hw_dbg(hw, "PCI-E Master disable polling has failed.\n"); + e_dbg("PCI-E Master disable polling has failed.\n"); } - hw_dbg(hw, "Masking off all interrupts\n"); + e_dbg("Masking off all interrupts\n"); ew32(IMC, 0xffffffff); /* @@ -2643,7 +2643,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) } ret_val = e1000_acquire_swflag_ich8lan(hw); /* Whether or not the swflag was acquired, we need to reset the part */ - hw_dbg(hw, "Issuing a global reset to ich8lan\n"); + e_dbg("Issuing a global reset to ich8lan\n"); ew32(CTRL, (ctrl | E1000_CTRL_RST)); msleep(20); @@ -2663,7 +2663,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) * return with an error. This can happen in situations * where there is no eeprom and prevents getting link. */ - hw_dbg(hw, "Auto Read Done did not complete\n"); + e_dbg("Auto Read Done did not complete\n"); } } /* Dummy read to clear the phy wakeup bit after lcd reset */ @@ -2725,7 +2725,7 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) /* Initialize identification LED */ ret_val = mac->ops.id_led_init(hw); if (ret_val) { - hw_dbg(hw, "Error initializing identification LED\n"); + e_dbg("Error initializing identification LED\n"); return ret_val; } @@ -2733,7 +2733,7 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) e1000e_init_rx_addrs(hw, mac->rar_entry_count); /* Zero out the Multicast HASH table */ - hw_dbg(hw, "Zeroing the MTA\n"); + e_dbg("Zeroing the MTA\n"); for (i = 0; i < mac->mta_reg_count; i++) E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0); @@ -2879,7 +2879,7 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw) */ hw->fc.current_mode = hw->fc.requested_mode; - hw_dbg(hw, "After fix-ups FlowControl is now = %x\n", + e_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.current_mode); /* Continue to configure the copper link. */ @@ -3094,7 +3094,7 @@ void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw, struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; if (hw->mac.type != e1000_ich8lan) { - hw_dbg(hw, "Workaround applies to ICH8 only.\n"); + e_dbg("Workaround applies to ICH8 only.\n"); return; } @@ -3372,8 +3372,7 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw) if (status & E1000_STATUS_PHYRA) ew32(STATUS, status & ~E1000_STATUS_PHYRA); else - hw_dbg(hw, - "PHY Reset Asserted not set - needs delay\n"); + e_dbg("PHY Reset Asserted not set - needs delay\n"); } e1000e_get_cfg_done(hw); @@ -3388,7 +3387,7 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw) } else { if (e1000_valid_nvm_bank_detect_ich8lan(hw, &bank)) { /* Maybe we should do a basic PHY config */ - hw_dbg(hw, "EEPROM not present\n"); + e_dbg("EEPROM not present\n"); return -E1000_ERR_CONFIG; } } diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index 5a670a2230e..fa31c51e564 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -110,12 +110,12 @@ void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count) u32 i; /* Setup the receive address */ - hw_dbg(hw, "Programming MAC Address into RAR[0]\n"); + e_dbg("Programming MAC Address into RAR[0]\n"); e1000e_rar_set(hw, hw->mac.addr, 0); /* Zero out the other (rar_entry_count - 1) receive addresses */ - hw_dbg(hw, "Clearing RAR[1-%u]\n", rar_count-1); + e_dbg("Clearing RAR[1-%u]\n", rar_count-1); for (i = 1; i < rar_count; i++) { E1000_WRITE_REG_ARRAY(hw, E1000_RA, (i << 1), 0); e1e_flush(); @@ -271,7 +271,7 @@ void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw, for (; mc_addr_count > 0; mc_addr_count--) { u32 hash_value, hash_reg, hash_bit, mta; hash_value = e1000_hash_mc_addr(hw, mc_addr_list); - hw_dbg(hw, "Hash value = 0x%03X\n", hash_value); + e_dbg("Hash value = 0x%03X\n", hash_value); hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1); hash_bit = hash_value & 0x1F; mta = (1 << hash_bit); @@ -403,7 +403,7 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw) */ ret_val = e1000e_config_fc_after_link_up(hw); if (ret_val) { - hw_dbg(hw, "Error configuring flow control\n"); + e_dbg("Error configuring flow control\n"); } return ret_val; @@ -443,7 +443,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw) mac->autoneg_failed = 1; return 0; } - hw_dbg(hw, "NOT RXing /C/, disable AutoNeg and force link.\n"); + e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n"); /* Disable auto-negotiation in the TXCW register */ ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE)); @@ -456,7 +456,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw) /* Configure Flow Control after forcing link up. */ ret_val = e1000e_config_fc_after_link_up(hw); if (ret_val) { - hw_dbg(hw, "Error configuring flow control\n"); + e_dbg("Error configuring flow control\n"); return ret_val; } } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { @@ -466,7 +466,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw) * and disable forced link in the Device Control register * in an attempt to auto-negotiate with our link partner. */ - hw_dbg(hw, "RXing /C/, enable AutoNeg and stop forcing link.\n"); + e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n"); ew32(TXCW, mac->txcw); ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); @@ -508,7 +508,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) mac->autoneg_failed = 1; return 0; } - hw_dbg(hw, "NOT RXing /C/, disable AutoNeg and force link.\n"); + e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n"); /* Disable auto-negotiation in the TXCW register */ ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE)); @@ -521,7 +521,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) /* Configure Flow Control after forcing link up. */ ret_val = e1000e_config_fc_after_link_up(hw); if (ret_val) { - hw_dbg(hw, "Error configuring flow control\n"); + e_dbg("Error configuring flow control\n"); return ret_val; } } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { @@ -531,7 +531,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) * and disable forced link in the Device Control register * in an attempt to auto-negotiate with our link partner. */ - hw_dbg(hw, "RXing /C/, enable AutoNeg and stop forcing link.\n"); + e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n"); ew32(TXCW, mac->txcw); ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); @@ -548,11 +548,11 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) if (rxcw & E1000_RXCW_SYNCH) { if (!(rxcw & E1000_RXCW_IV)) { mac->serdes_has_link = true; - hw_dbg(hw, "SERDES: Link up - forced.\n"); + e_dbg("SERDES: Link up - forced.\n"); } } else { mac->serdes_has_link = false; - hw_dbg(hw, "SERDES: Link down - force failed.\n"); + e_dbg("SERDES: Link down - force failed.\n"); } } @@ -565,20 +565,20 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) if (rxcw & E1000_RXCW_SYNCH) { if (!(rxcw & E1000_RXCW_IV)) { mac->serdes_has_link = true; - hw_dbg(hw, "SERDES: Link up - autoneg " + e_dbg("SERDES: Link up - autoneg " "completed sucessfully.\n"); } else { mac->serdes_has_link = false; - hw_dbg(hw, "SERDES: Link down - invalid" + e_dbg("SERDES: Link down - invalid" "codewords detected in autoneg.\n"); } } else { mac->serdes_has_link = false; - hw_dbg(hw, "SERDES: Link down - no sync.\n"); + e_dbg("SERDES: Link down - no sync.\n"); } } else { mac->serdes_has_link = false; - hw_dbg(hw, "SERDES: Link down - autoneg failed\n"); + e_dbg("SERDES: Link down - autoneg failed\n"); } } @@ -609,7 +609,7 @@ static s32 e1000_set_default_fc_generic(struct e1000_hw *hw) ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + e_dbg("NVM Read Error\n"); return ret_val; } @@ -662,7 +662,7 @@ s32 e1000e_setup_link(struct e1000_hw *hw) */ hw->fc.current_mode = hw->fc.requested_mode; - hw_dbg(hw, "After fix-ups FlowControl is now = %x\n", + e_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.current_mode); /* Call the necessary media_type subroutine to configure the link. */ @@ -676,7 +676,7 @@ s32 e1000e_setup_link(struct e1000_hw *hw) * control is disabled, because it does not hurt anything to * initialize these registers. */ - hw_dbg(hw, "Initializing the Flow Control address, type and timer regs\n"); + e_dbg("Initializing the Flow Control address, type and timer regs\n"); ew32(FCT, FLOW_CONTROL_TYPE); ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH); ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW); @@ -746,7 +746,7 @@ static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw) txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); break; default: - hw_dbg(hw, "Flow control param set incorrectly\n"); + e_dbg("Flow control param set incorrectly\n"); return -E1000_ERR_CONFIG; break; } @@ -784,7 +784,7 @@ static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw) break; } if (i == FIBER_LINK_UP_LIMIT) { - hw_dbg(hw, "Never got a valid link from auto-neg!!!\n"); + e_dbg("Never got a valid link from auto-neg!!!\n"); mac->autoneg_failed = 1; /* * AutoNeg failed to achieve a link, so we'll call @@ -794,13 +794,13 @@ static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw) */ ret_val = mac->ops.check_for_link(hw); if (ret_val) { - hw_dbg(hw, "Error while checking for link\n"); + e_dbg("Error while checking for link\n"); return ret_val; } mac->autoneg_failed = 0; } else { mac->autoneg_failed = 0; - hw_dbg(hw, "Valid Link Found\n"); + e_dbg("Valid Link Found\n"); } return 0; @@ -836,7 +836,7 @@ s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw) * then the link-up status bit will be set and the flow control enable * bits (RFCE and TFCE) will be set according to their negotiated value. */ - hw_dbg(hw, "Auto-negotiation enabled\n"); + e_dbg("Auto-negotiation enabled\n"); ew32(CTRL, ctrl); e1e_flush(); @@ -851,7 +851,7 @@ s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw) (er32(CTRL) & E1000_CTRL_SWDPIN1)) { ret_val = e1000_poll_fiber_serdes_link_generic(hw); } else { - hw_dbg(hw, "No signal detected\n"); + e_dbg("No signal detected\n"); } return 0; @@ -947,7 +947,7 @@ s32 e1000e_force_mac_fc(struct e1000_hw *hw) * 3: Both Rx and Tx flow control (symmetric) is enabled. * other: No other values should be possible at this point. */ - hw_dbg(hw, "hw->fc.current_mode = %u\n", hw->fc.current_mode); + e_dbg("hw->fc.current_mode = %u\n", hw->fc.current_mode); switch (hw->fc.current_mode) { case e1000_fc_none: @@ -965,7 +965,7 @@ s32 e1000e_force_mac_fc(struct e1000_hw *hw) ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE); break; default: - hw_dbg(hw, "Flow control param set incorrectly\n"); + e_dbg("Flow control param set incorrectly\n"); return -E1000_ERR_CONFIG; } @@ -1006,7 +1006,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) } if (ret_val) { - hw_dbg(hw, "Error forcing flow control settings\n"); + e_dbg("Error forcing flow control settings\n"); return ret_val; } @@ -1030,7 +1030,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) return ret_val; if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) { - hw_dbg(hw, "Copper PHY and Auto Neg " + e_dbg("Copper PHY and Auto Neg " "has not completed.\n"); return ret_val; } @@ -1095,10 +1095,10 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) */ if (hw->fc.requested_mode == e1000_fc_full) { hw->fc.current_mode = e1000_fc_full; - hw_dbg(hw, "Flow Control = FULL.\r\n"); + e_dbg("Flow Control = FULL.\r\n"); } else { hw->fc.current_mode = e1000_fc_rx_pause; - hw_dbg(hw, "Flow Control = " + e_dbg("Flow Control = " "RX PAUSE frames only.\r\n"); } } @@ -1116,7 +1116,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { hw->fc.current_mode = e1000_fc_tx_pause; - hw_dbg(hw, "Flow Control = Tx PAUSE frames only.\r\n"); + e_dbg("Flow Control = Tx PAUSE frames only.\r\n"); } /* * For transmitting PAUSE frames ONLY. @@ -1132,14 +1132,14 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { hw->fc.current_mode = e1000_fc_rx_pause; - hw_dbg(hw, "Flow Control = Rx PAUSE frames only.\r\n"); + e_dbg("Flow Control = Rx PAUSE frames only.\r\n"); } else { /* * Per the IEEE spec, at this point flow control * should be disabled. */ hw->fc.current_mode = e1000_fc_none; - hw_dbg(hw, "Flow Control = NONE.\r\n"); + e_dbg("Flow Control = NONE.\r\n"); } /* @@ -1149,7 +1149,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) */ ret_val = mac->ops.get_link_up_info(hw, &speed, &duplex); if (ret_val) { - hw_dbg(hw, "Error getting link speed and duplex\n"); + e_dbg("Error getting link speed and duplex\n"); return ret_val; } @@ -1162,7 +1162,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) */ ret_val = e1000e_force_mac_fc(hw); if (ret_val) { - hw_dbg(hw, "Error forcing flow control settings\n"); + e_dbg("Error forcing flow control settings\n"); return ret_val; } } @@ -1186,21 +1186,21 @@ s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *dup status = er32(STATUS); if (status & E1000_STATUS_SPEED_1000) { *speed = SPEED_1000; - hw_dbg(hw, "1000 Mbs, "); + e_dbg("1000 Mbs, "); } else if (status & E1000_STATUS_SPEED_100) { *speed = SPEED_100; - hw_dbg(hw, "100 Mbs, "); + e_dbg("100 Mbs, "); } else { *speed = SPEED_10; - hw_dbg(hw, "10 Mbs, "); + e_dbg("10 Mbs, "); } if (status & E1000_STATUS_FD) { *duplex = FULL_DUPLEX; - hw_dbg(hw, "Full Duplex\n"); + e_dbg("Full Duplex\n"); } else { *duplex = HALF_DUPLEX; - hw_dbg(hw, "Half Duplex\n"); + e_dbg("Half Duplex\n"); } return 0; @@ -1246,7 +1246,7 @@ s32 e1000e_get_hw_semaphore(struct e1000_hw *hw) } if (i == timeout) { - hw_dbg(hw, "Driver can't access device - SMBI bit is set.\n"); + e_dbg("Driver can't access device - SMBI bit is set.\n"); return -E1000_ERR_NVM; } @@ -1265,7 +1265,7 @@ s32 e1000e_get_hw_semaphore(struct e1000_hw *hw) if (i == timeout) { /* Release semaphores */ e1000e_put_hw_semaphore(hw); - hw_dbg(hw, "Driver can't access the NVM\n"); + e_dbg("Driver can't access the NVM\n"); return -E1000_ERR_NVM; } @@ -1305,7 +1305,7 @@ s32 e1000e_get_auto_rd_done(struct e1000_hw *hw) } if (i == AUTO_READ_DONE_TIMEOUT) { - hw_dbg(hw, "Auto read by HW from NVM has not completed.\n"); + e_dbg("Auto read by HW from NVM has not completed.\n"); return -E1000_ERR_RESET; } @@ -1326,7 +1326,7 @@ s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data) ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + e_dbg("NVM Read Error\n"); return ret_val; } @@ -1580,7 +1580,7 @@ s32 e1000e_disable_pcie_master(struct e1000_hw *hw) } if (!timeout) { - hw_dbg(hw, "Master requests are pending.\n"); + e_dbg("Master requests are pending.\n"); return -E1000_ERR_MASTER_REQUESTS_PENDING; } @@ -1804,7 +1804,7 @@ s32 e1000e_acquire_nvm(struct e1000_hw *hw) if (!timeout) { eecd &= ~E1000_EECD_REQ; ew32(EECD, eecd); - hw_dbg(hw, "Could not acquire NVM grant\n"); + e_dbg("Could not acquire NVM grant\n"); return -E1000_ERR_NVM; } @@ -1909,7 +1909,7 @@ static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw) } if (!timeout) { - hw_dbg(hw, "SPI NVM Status error\n"); + e_dbg("SPI NVM Status error\n"); return -E1000_ERR_NVM; } } @@ -1938,7 +1938,7 @@ s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) */ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || (words == 0)) { - hw_dbg(hw, "nvm parameter(s) out of bounds\n"); + e_dbg("nvm parameter(s) out of bounds\n"); return -E1000_ERR_NVM; } @@ -1981,7 +1981,7 @@ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) */ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || (words == 0)) { - hw_dbg(hw, "nvm parameter(s) out of bounds\n"); + e_dbg("nvm parameter(s) out of bounds\n"); return -E1000_ERR_NVM; } @@ -2061,7 +2061,7 @@ s32 e1000e_read_mac_addr(struct e1000_hw *hw) ret_val = e1000_read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1, &mac_addr_offset); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + e_dbg("NVM Read Error\n"); return ret_val; } if (mac_addr_offset == 0xFFFF) @@ -2076,7 +2076,7 @@ s32 e1000e_read_mac_addr(struct e1000_hw *hw) ret_val = e1000_read_nvm(hw, mac_addr_offset, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + e_dbg("NVM Read Error\n"); return ret_val; } if (nvm_data & 0x0001) @@ -2091,7 +2091,7 @@ s32 e1000e_read_mac_addr(struct e1000_hw *hw) offset = mac_addr_offset + (i >> 1); ret_val = e1000_read_nvm(hw, offset, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + e_dbg("NVM Read Error\n"); return ret_val; } hw->mac.perm_addr[i] = (u8)(nvm_data & 0xFF); @@ -2124,14 +2124,14 @@ s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw) for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) { ret_val = e1000_read_nvm(hw, i, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + e_dbg("NVM Read Error\n"); return ret_val; } checksum += nvm_data; } if (checksum != (u16) NVM_SUM) { - hw_dbg(hw, "NVM Checksum Invalid\n"); + e_dbg("NVM Checksum Invalid\n"); return -E1000_ERR_NVM; } @@ -2155,7 +2155,7 @@ s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw) for (i = 0; i < NVM_CHECKSUM_REG; i++) { ret_val = e1000_read_nvm(hw, i, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error while updating checksum.\n"); + e_dbg("NVM Read Error while updating checksum.\n"); return ret_val; } checksum += nvm_data; @@ -2163,7 +2163,7 @@ s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw) checksum = (u16) NVM_SUM - checksum; ret_val = e1000_write_nvm(hw, NVM_CHECKSUM_REG, 1, &checksum); if (ret_val) - hw_dbg(hw, "NVM Write Error while updating checksum.\n"); + e_dbg("NVM Write Error while updating checksum.\n"); return ret_val; } @@ -2226,7 +2226,7 @@ static s32 e1000_mng_enable_host_if(struct e1000_hw *hw) /* Check that the host interface is enabled. */ hicr = er32(HICR); if ((hicr & E1000_HICR_EN) == 0) { - hw_dbg(hw, "E1000_HOST_EN bit disabled.\n"); + e_dbg("E1000_HOST_EN bit disabled.\n"); return -E1000_ERR_HOST_INTERFACE_COMMAND; } /* check the previous command is completed */ @@ -2238,7 +2238,7 @@ static s32 e1000_mng_enable_host_if(struct e1000_hw *hw) } if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) { - hw_dbg(hw, "Previous command timeout failed .\n"); + e_dbg("Previous command timeout failed .\n"); return -E1000_ERR_HOST_INTERFACE_COMMAND; } @@ -2509,14 +2509,14 @@ s32 e1000e_read_pba_num(struct e1000_hw *hw, u32 *pba_num) ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_0, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + e_dbg("NVM Read Error\n"); return ret_val; } *pba_num = (u32)(nvm_data << 16); ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_1, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + e_dbg("NVM Read Error\n"); return ret_val; } *pba_num |= nvm_data; diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index ff9f9f1725e..0b5352307f1 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -65,17 +65,6 @@ static const struct e1000_info *e1000_info_tbl[] = { [board_pchlan] = &e1000_pch_info, }; -#ifdef DEBUG -/** - * e1000_get_hw_dev_name - return device name string - * used by hardware layer to print debugging information - **/ -char *e1000e_get_hw_dev_name(struct e1000_hw *hw) -{ - return hw->adapter->netdev->name; -} -#endif - /** * e1000_desc_unused - calculate if we have unused descriptors **/ @@ -415,6 +404,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, { struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; + struct e1000_hw *hw = &adapter->hw; struct e1000_ring *rx_ring = adapter->rx_ring; struct e1000_rx_desc *rx_desc, *next_rxd; struct e1000_buffer *buffer_info, *next_buffer; @@ -464,8 +454,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, * packet, also make sure the frame isn't just CRC only */ if (!(status & E1000_RXD_STAT_EOP) || (length <= 4)) { /* All receives must fit into a single buffer */ - e_dbg("%s: Receive packet consumed multiple buffers\n", - netdev->name); + e_dbg("Receive packet consumed multiple buffers\n"); /* recycle */ buffer_info->skb = skb; goto next_desc; @@ -682,6 +671,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter) static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, int *work_done, int work_to_do) { + struct e1000_hw *hw = &adapter->hw; union e1000_rx_desc_packet_split *rx_desc, *next_rxd; struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; @@ -725,8 +715,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, buffer_info->dma = 0; if (!(staterr & E1000_RXD_STAT_EOP)) { - e_dbg("%s: Packet Split buffers didn't pick up the " - "full packet\n", netdev->name); + e_dbg("Packet Split buffers didn't pick up the full " + "packet\n"); dev_kfree_skb_irq(skb); goto next_desc; } @@ -739,8 +729,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, length = le16_to_cpu(rx_desc->wb.middle.length0); if (!length) { - e_dbg("%s: Last part of the packet spanning multiple " - "descriptors\n", netdev->name); + e_dbg("Last part of the packet spanning multiple " + "descriptors\n"); dev_kfree_skb_irq(skb); goto next_desc; } @@ -2931,7 +2921,7 @@ static irqreturn_t e1000_intr_msi_test(int irq, void *data) struct e1000_hw *hw = &adapter->hw; u32 icr = er32(ICR); - e_dbg("%s: icr is %08X\n", netdev->name, icr); + e_dbg("icr is %08X\n", icr); if (icr & E1000_ICR_RXSEQ) { adapter->flags &= ~FLAG_MSI_TEST_FAILED; wmb(); @@ -3001,7 +2991,7 @@ static int e1000_test_msi_interrupt(struct e1000_adapter *adapter) goto msi_test_failed; /* okay so the test worked, restore settings */ - e_dbg("%s: MSI interrupt test succeeded!\n", netdev->name); + e_dbg("MSI interrupt test succeeded!\n"); msi_test_failed: e1000e_set_interrupt_capability(adapter); e1000_request_irq(adapter); diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 95a8196cf44..cff1df20403 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -212,7 +212,7 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) u32 i, mdic = 0; if (offset > MAX_PHY_REG_ADDRESS) { - hw_dbg(hw, "PHY Address %d is out of range\n", offset); + e_dbg("PHY Address %d is out of range\n", offset); return -E1000_ERR_PARAM; } @@ -239,11 +239,11 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) break; } if (!(mdic & E1000_MDIC_READY)) { - hw_dbg(hw, "MDI Read did not complete\n"); + e_dbg("MDI Read did not complete\n"); return -E1000_ERR_PHY; } if (mdic & E1000_MDIC_ERROR) { - hw_dbg(hw, "MDI Error\n"); + e_dbg("MDI Error\n"); return -E1000_ERR_PHY; } *data = (u16) mdic; @@ -265,7 +265,7 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) u32 i, mdic = 0; if (offset > MAX_PHY_REG_ADDRESS) { - hw_dbg(hw, "PHY Address %d is out of range\n", offset); + e_dbg("PHY Address %d is out of range\n", offset); return -E1000_ERR_PARAM; } @@ -293,11 +293,11 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) break; } if (!(mdic & E1000_MDIC_READY)) { - hw_dbg(hw, "MDI Write did not complete\n"); + e_dbg("MDI Write did not complete\n"); return -E1000_ERR_PHY; } if (mdic & E1000_MDIC_ERROR) { - hw_dbg(hw, "MDI Error\n"); + e_dbg("MDI Error\n"); return -E1000_ERR_PHY; } @@ -786,7 +786,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw) /* Commit the changes. */ ret_val = e1000e_commit_phy(hw); if (ret_val) { - hw_dbg(hw, "Error committing the PHY changes\n"); + e_dbg("Error committing the PHY changes\n"); return ret_val; } @@ -823,7 +823,7 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw) ret_val = e1000_phy_hw_reset(hw); if (ret_val) { - hw_dbg(hw, "Error resetting the PHY.\n"); + e_dbg("Error resetting the PHY.\n"); return ret_val; } @@ -836,7 +836,7 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw) /* disable lplu d0 during driver init */ ret_val = e1000_set_d0_lplu_state(hw, 0); if (ret_val) { - hw_dbg(hw, "Error Disabling LPLU D0\n"); + e_dbg("Error Disabling LPLU D0\n"); return ret_val; } /* Configure mdi-mdix settings */ @@ -972,39 +972,39 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) NWAY_AR_10T_HD_CAPS); mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS); - hw_dbg(hw, "autoneg_advertised %x\n", phy->autoneg_advertised); + e_dbg("autoneg_advertised %x\n", phy->autoneg_advertised); /* Do we want to advertise 10 Mb Half Duplex? */ if (phy->autoneg_advertised & ADVERTISE_10_HALF) { - hw_dbg(hw, "Advertise 10mb Half duplex\n"); + e_dbg("Advertise 10mb Half duplex\n"); mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS; } /* Do we want to advertise 10 Mb Full Duplex? */ if (phy->autoneg_advertised & ADVERTISE_10_FULL) { - hw_dbg(hw, "Advertise 10mb Full duplex\n"); + e_dbg("Advertise 10mb Full duplex\n"); mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS; } /* Do we want to advertise 100 Mb Half Duplex? */ if (phy->autoneg_advertised & ADVERTISE_100_HALF) { - hw_dbg(hw, "Advertise 100mb Half duplex\n"); + e_dbg("Advertise 100mb Half duplex\n"); mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS; } /* Do we want to advertise 100 Mb Full Duplex? */ if (phy->autoneg_advertised & ADVERTISE_100_FULL) { - hw_dbg(hw, "Advertise 100mb Full duplex\n"); + e_dbg("Advertise 100mb Full duplex\n"); mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS; } /* We do not allow the Phy to advertise 1000 Mb Half Duplex */ if (phy->autoneg_advertised & ADVERTISE_1000_HALF) - hw_dbg(hw, "Advertise 1000mb Half duplex request denied!\n"); + e_dbg("Advertise 1000mb Half duplex request denied!\n"); /* Do we want to advertise 1000 Mb Full Duplex? */ if (phy->autoneg_advertised & ADVERTISE_1000_FULL) { - hw_dbg(hw, "Advertise 1000mb Full duplex\n"); + e_dbg("Advertise 1000mb Full duplex\n"); mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS; } @@ -1063,7 +1063,7 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); break; default: - hw_dbg(hw, "Flow control param set incorrectly\n"); + e_dbg("Flow control param set incorrectly\n"); ret_val = -E1000_ERR_CONFIG; return ret_val; } @@ -1072,7 +1072,7 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) if (ret_val) return ret_val; - hw_dbg(hw, "Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); + e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); if (phy->autoneg_mask & ADVERTISE_1000_FULL) { ret_val = e1e_wphy(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg); @@ -1109,13 +1109,13 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) if (phy->autoneg_advertised == 0) phy->autoneg_advertised = phy->autoneg_mask; - hw_dbg(hw, "Reconfiguring auto-neg advertisement params\n"); + e_dbg("Reconfiguring auto-neg advertisement params\n"); ret_val = e1000_phy_setup_autoneg(hw); if (ret_val) { - hw_dbg(hw, "Error Setting up Auto-Negotiation\n"); + e_dbg("Error Setting up Auto-Negotiation\n"); return ret_val; } - hw_dbg(hw, "Restarting Auto-Neg\n"); + e_dbg("Restarting Auto-Neg\n"); /* * Restart auto-negotiation by setting the Auto Neg Enable bit and @@ -1137,7 +1137,7 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) if (phy->autoneg_wait_to_complete) { ret_val = e1000_wait_autoneg(hw); if (ret_val) { - hw_dbg(hw, "Error while waiting for " + e_dbg("Error while waiting for " "autoneg to complete\n"); return ret_val; } @@ -1175,10 +1175,10 @@ s32 e1000e_setup_copper_link(struct e1000_hw *hw) * PHY will be set to 10H, 10F, 100H or 100F * depending on user settings. */ - hw_dbg(hw, "Forcing Speed and Duplex\n"); + e_dbg("Forcing Speed and Duplex\n"); ret_val = e1000_phy_force_speed_duplex(hw); if (ret_val) { - hw_dbg(hw, "Error Forcing Speed and Duplex\n"); + e_dbg("Error Forcing Speed and Duplex\n"); return ret_val; } } @@ -1195,11 +1195,11 @@ s32 e1000e_setup_copper_link(struct e1000_hw *hw) return ret_val; if (link) { - hw_dbg(hw, "Valid link established!!!\n"); + e_dbg("Valid link established!!!\n"); e1000e_config_collision_dist(hw); ret_val = e1000e_config_fc_after_link_up(hw); } else { - hw_dbg(hw, "Unable to establish link!!!\n"); + e_dbg("Unable to establish link!!!\n"); } return ret_val; @@ -1245,12 +1245,12 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw) if (ret_val) return ret_val; - hw_dbg(hw, "IGP PSCR: %X\n", phy_data); + e_dbg("IGP PSCR: %X\n", phy_data); udelay(1); if (phy->autoneg_wait_to_complete) { - hw_dbg(hw, "Waiting for forced speed/duplex link on IGP phy.\n"); + e_dbg("Waiting for forced speed/duplex link on IGP phy.\n"); ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT, @@ -1260,7 +1260,7 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw) return ret_val; if (!link) - hw_dbg(hw, "Link taking longer than expected.\n"); + e_dbg("Link taking longer than expected.\n"); /* Try once more */ ret_val = e1000e_phy_has_link_generic(hw, @@ -1304,7 +1304,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw) if (ret_val) return ret_val; - hw_dbg(hw, "M88E1000 PSCR: %X\n", phy_data); + e_dbg("M88E1000 PSCR: %X\n", phy_data); ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data); if (ret_val) @@ -1322,7 +1322,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw) return ret_val; if (phy->autoneg_wait_to_complete) { - hw_dbg(hw, "Waiting for forced speed/duplex link on M88 phy.\n"); + e_dbg("Waiting for forced speed/duplex link on M88 phy.\n"); ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT, 100000, &link); @@ -1413,11 +1413,11 @@ void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl) if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) { ctrl &= ~E1000_CTRL_FD; *phy_ctrl &= ~MII_CR_FULL_DUPLEX; - hw_dbg(hw, "Half Duplex\n"); + e_dbg("Half Duplex\n"); } else { ctrl |= E1000_CTRL_FD; *phy_ctrl |= MII_CR_FULL_DUPLEX; - hw_dbg(hw, "Full Duplex\n"); + e_dbg("Full Duplex\n"); } /* Forcing 10mb or 100mb? */ @@ -1425,12 +1425,12 @@ void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl) ctrl |= E1000_CTRL_SPD_100; *phy_ctrl |= MII_CR_SPEED_100; *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10); - hw_dbg(hw, "Forcing 100mb\n"); + e_dbg("Forcing 100mb\n"); } else { ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100); *phy_ctrl |= MII_CR_SPEED_10; *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100); - hw_dbg(hw, "Forcing 10mb\n"); + e_dbg("Forcing 10mb\n"); } e1000e_config_collision_dist(hw); @@ -1826,7 +1826,7 @@ s32 e1000e_get_phy_info_m88(struct e1000_hw *hw) bool link; if (hw->phy.media_type != e1000_media_type_copper) { - hw_dbg(hw, "Phy info is only valid for copper media\n"); + e_dbg("Phy info is only valid for copper media\n"); return -E1000_ERR_CONFIG; } @@ -1835,7 +1835,7 @@ s32 e1000e_get_phy_info_m88(struct e1000_hw *hw) return ret_val; if (!link) { - hw_dbg(hw, "Phy info is only valid if link is up\n"); + e_dbg("Phy info is only valid if link is up\n"); return -E1000_ERR_CONFIG; } @@ -1903,7 +1903,7 @@ s32 e1000e_get_phy_info_igp(struct e1000_hw *hw) return ret_val; if (!link) { - hw_dbg(hw, "Phy info is only valid if link is up\n"); + e_dbg("Phy info is only valid if link is up\n"); return -E1000_ERR_CONFIG; } @@ -2031,7 +2031,7 @@ s32 e1000e_get_cfg_done(struct e1000_hw *hw) **/ s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw) { - hw_dbg(hw, "Running IGP 3 PHY init script\n"); + e_dbg("Running IGP 3 PHY init script\n"); /* PHY init IGP 3 */ /* Enable rise/fall, 10-mode work in class-A */ @@ -2474,7 +2474,7 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, /* Gig must be disabled for MDIO accesses to page 800 */ if ((hw->mac.type == e1000_pchlan) && (!(er32(PHY_CTRL) & E1000_PHY_CTRL_GBE_DISABLE))) - hw_dbg(hw, "Attempting to access page 800 while gig enabled\n"); + e_dbg("Attempting to access page 800 while gig enabled\n"); /* All operations in this function are phy address 1 */ hw->phy.addr = 1; @@ -2884,7 +2884,7 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset, /* masking with 0x3F to remove the page from offset */ ret_val = e1000e_write_phy_reg_mdic(hw, addr_reg, (u16)offset & 0x3F); if (ret_val) { - hw_dbg(hw, "Could not write PHY the HV address register\n"); + e_dbg("Could not write PHY the HV address register\n"); goto out; } @@ -2895,7 +2895,7 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset, ret_val = e1000e_write_phy_reg_mdic(hw, data_reg, *data); if (ret_val) { - hw_dbg(hw, "Could not read data value from HV data register\n"); + e_dbg("Could not read data value from HV data register\n"); goto out; } @@ -3021,12 +3021,12 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw) if (ret_val) goto out; - hw_dbg(hw, "I82577_PHY_CTRL_2: %X\n", phy_data); + e_dbg("I82577_PHY_CTRL_2: %X\n", phy_data); udelay(1); if (phy->autoneg_wait_to_complete) { - hw_dbg(hw, "Waiting for forced speed/duplex link on 82577 phy\n"); + e_dbg("Waiting for forced speed/duplex link on 82577 phy\n"); ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT, @@ -3036,7 +3036,7 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw) goto out; if (!link) - hw_dbg(hw, "Link taking longer than expected.\n"); + e_dbg("Link taking longer than expected.\n"); /* Try once more */ ret_val = e1000e_phy_has_link_generic(hw, @@ -3072,7 +3072,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw) goto out; if (!link) { - hw_dbg(hw, "Phy info is only valid if link is up\n"); + e_dbg("Phy info is only valid if link is up\n"); ret_val = -E1000_ERR_CONFIG; goto out; } -- cgit v1.2.3-70-g09d2 From 94d8186a693284344ee5cb9734086c7a2370241a Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Fri, 20 Nov 2009 23:25:26 +0000 Subject: e1000e: cleanup ops function pointers The phy and nvm operations structures have function pointers that contain "phy" and "nvm" in the pointer names which are redundant since the structures are already obviously in phy and nvm structures. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/82571.c | 54 +++++++-------- drivers/net/e1000e/e1000.h | 16 ++--- drivers/net/e1000e/es2lan.c | 26 ++++---- drivers/net/e1000e/hw.h | 32 ++++----- drivers/net/e1000e/ich8lan.c | 156 +++++++++++++++++++++---------------------- drivers/net/e1000e/lib.c | 6 +- drivers/net/e1000e/netdev.c | 4 +- drivers/net/e1000e/phy.c | 110 +++++++++++++++--------------- 8 files changed, 201 insertions(+), 203 deletions(-) (limited to 'drivers/net/e1000e/phy.c') diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index 680b7c70306..6fe1b3c73c1 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -1671,64 +1671,64 @@ static struct e1000_mac_operations e82571_mac_ops = { }; static struct e1000_phy_operations e82_phy_ops_igp = { - .acquire_phy = e1000_get_hw_semaphore_82571, + .acquire = e1000_get_hw_semaphore_82571, .check_reset_block = e1000e_check_reset_block_generic, - .commit_phy = NULL, + .commit = NULL, .force_speed_duplex = e1000e_phy_force_speed_duplex_igp, .get_cfg_done = e1000_get_cfg_done_82571, .get_cable_length = e1000e_get_cable_length_igp_2, - .get_phy_info = e1000e_get_phy_info_igp, - .read_phy_reg = e1000e_read_phy_reg_igp, - .release_phy = e1000_put_hw_semaphore_82571, - .reset_phy = e1000e_phy_hw_reset_generic, + .get_info = e1000e_get_phy_info_igp, + .read_reg = e1000e_read_phy_reg_igp, + .release = e1000_put_hw_semaphore_82571, + .reset = e1000e_phy_hw_reset_generic, .set_d0_lplu_state = e1000_set_d0_lplu_state_82571, .set_d3_lplu_state = e1000e_set_d3_lplu_state, - .write_phy_reg = e1000e_write_phy_reg_igp, + .write_reg = e1000e_write_phy_reg_igp, .cfg_on_link_up = NULL, }; static struct e1000_phy_operations e82_phy_ops_m88 = { - .acquire_phy = e1000_get_hw_semaphore_82571, + .acquire = e1000_get_hw_semaphore_82571, .check_reset_block = e1000e_check_reset_block_generic, - .commit_phy = e1000e_phy_sw_reset, + .commit = e1000e_phy_sw_reset, .force_speed_duplex = e1000e_phy_force_speed_duplex_m88, .get_cfg_done = e1000e_get_cfg_done, .get_cable_length = e1000e_get_cable_length_m88, - .get_phy_info = e1000e_get_phy_info_m88, - .read_phy_reg = e1000e_read_phy_reg_m88, - .release_phy = e1000_put_hw_semaphore_82571, - .reset_phy = e1000e_phy_hw_reset_generic, + .get_info = e1000e_get_phy_info_m88, + .read_reg = e1000e_read_phy_reg_m88, + .release = e1000_put_hw_semaphore_82571, + .reset = e1000e_phy_hw_reset_generic, .set_d0_lplu_state = e1000_set_d0_lplu_state_82571, .set_d3_lplu_state = e1000e_set_d3_lplu_state, - .write_phy_reg = e1000e_write_phy_reg_m88, + .write_reg = e1000e_write_phy_reg_m88, .cfg_on_link_up = NULL, }; static struct e1000_phy_operations e82_phy_ops_bm = { - .acquire_phy = e1000_get_hw_semaphore_82571, + .acquire = e1000_get_hw_semaphore_82571, .check_reset_block = e1000e_check_reset_block_generic, - .commit_phy = e1000e_phy_sw_reset, + .commit = e1000e_phy_sw_reset, .force_speed_duplex = e1000e_phy_force_speed_duplex_m88, .get_cfg_done = e1000e_get_cfg_done, .get_cable_length = e1000e_get_cable_length_m88, - .get_phy_info = e1000e_get_phy_info_m88, - .read_phy_reg = e1000e_read_phy_reg_bm2, - .release_phy = e1000_put_hw_semaphore_82571, - .reset_phy = e1000e_phy_hw_reset_generic, + .get_info = e1000e_get_phy_info_m88, + .read_reg = e1000e_read_phy_reg_bm2, + .release = e1000_put_hw_semaphore_82571, + .reset = e1000e_phy_hw_reset_generic, .set_d0_lplu_state = e1000_set_d0_lplu_state_82571, .set_d3_lplu_state = e1000e_set_d3_lplu_state, - .write_phy_reg = e1000e_write_phy_reg_bm2, + .write_reg = e1000e_write_phy_reg_bm2, .cfg_on_link_up = NULL, }; static struct e1000_nvm_operations e82571_nvm_ops = { - .acquire_nvm = e1000_acquire_nvm_82571, - .read_nvm = e1000e_read_nvm_eerd, - .release_nvm = e1000_release_nvm_82571, - .update_nvm = e1000_update_nvm_checksum_82571, + .acquire = e1000_acquire_nvm_82571, + .read = e1000e_read_nvm_eerd, + .release = e1000_release_nvm_82571, + .update = e1000_update_nvm_checksum_82571, .valid_led_default = e1000_valid_led_default_82571, - .validate_nvm = e1000_validate_nvm_checksum_82571, - .write_nvm = e1000_write_nvm_82571, + .validate = e1000_validate_nvm_checksum_82571, + .write = e1000_write_nvm_82571, }; struct e1000_info e1000_82571_info = { diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index dac00a02383..602598c8c18 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -584,7 +584,7 @@ extern s32 e1000_get_cable_length_82577(struct e1000_hw *hw); static inline s32 e1000_phy_hw_reset(struct e1000_hw *hw) { - return hw->phy.ops.reset_phy(hw); + return hw->phy.ops.reset(hw); } static inline s32 e1000_check_reset_block(struct e1000_hw *hw) @@ -594,12 +594,12 @@ static inline s32 e1000_check_reset_block(struct e1000_hw *hw) static inline s32 e1e_rphy(struct e1000_hw *hw, u32 offset, u16 *data) { - return hw->phy.ops.read_phy_reg(hw, offset, data); + return hw->phy.ops.read_reg(hw, offset, data); } static inline s32 e1e_wphy(struct e1000_hw *hw, u32 offset, u16 data) { - return hw->phy.ops.write_phy_reg(hw, offset, data); + return hw->phy.ops.write_reg(hw, offset, data); } static inline s32 e1000_get_cable_length(struct e1000_hw *hw) @@ -619,27 +619,27 @@ extern s32 e1000e_read_mac_addr(struct e1000_hw *hw); static inline s32 e1000_validate_nvm_checksum(struct e1000_hw *hw) { - return hw->nvm.ops.validate_nvm(hw); + return hw->nvm.ops.validate(hw); } static inline s32 e1000e_update_nvm_checksum(struct e1000_hw *hw) { - return hw->nvm.ops.update_nvm(hw); + return hw->nvm.ops.update(hw); } static inline s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) { - return hw->nvm.ops.read_nvm(hw, offset, words, data); + return hw->nvm.ops.read(hw, offset, words, data); } static inline s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) { - return hw->nvm.ops.write_nvm(hw, offset, words, data); + return hw->nvm.ops.write(hw, offset, words, data); } static inline s32 e1000_get_phy_info(struct e1000_hw *hw) { - return hw->phy.ops.get_phy_info(hw); + return hw->phy.ops.get_info(hw); } static inline s32 e1000e_check_mng_mode(struct e1000_hw *hw) diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c index f5601c5ff7a..d024e20bc6a 100644 --- a/drivers/net/e1000e/es2lan.c +++ b/drivers/net/e1000e/es2lan.c @@ -1378,30 +1378,30 @@ static struct e1000_mac_operations es2_mac_ops = { }; static struct e1000_phy_operations es2_phy_ops = { - .acquire_phy = e1000_acquire_phy_80003es2lan, + .acquire = e1000_acquire_phy_80003es2lan, .check_reset_block = e1000e_check_reset_block_generic, - .commit_phy = e1000e_phy_sw_reset, + .commit = e1000e_phy_sw_reset, .force_speed_duplex = e1000_phy_force_speed_duplex_80003es2lan, .get_cfg_done = e1000_get_cfg_done_80003es2lan, .get_cable_length = e1000_get_cable_length_80003es2lan, - .get_phy_info = e1000e_get_phy_info_m88, - .read_phy_reg = e1000_read_phy_reg_gg82563_80003es2lan, - .release_phy = e1000_release_phy_80003es2lan, - .reset_phy = e1000e_phy_hw_reset_generic, + .get_info = e1000e_get_phy_info_m88, + .read_reg = e1000_read_phy_reg_gg82563_80003es2lan, + .release = e1000_release_phy_80003es2lan, + .reset = e1000e_phy_hw_reset_generic, .set_d0_lplu_state = NULL, .set_d3_lplu_state = e1000e_set_d3_lplu_state, - .write_phy_reg = e1000_write_phy_reg_gg82563_80003es2lan, + .write_reg = e1000_write_phy_reg_gg82563_80003es2lan, .cfg_on_link_up = e1000_cfg_on_link_up_80003es2lan, }; static struct e1000_nvm_operations es2_nvm_ops = { - .acquire_nvm = e1000_acquire_nvm_80003es2lan, - .read_nvm = e1000e_read_nvm_eerd, - .release_nvm = e1000_release_nvm_80003es2lan, - .update_nvm = e1000e_update_nvm_checksum_generic, + .acquire = e1000_acquire_nvm_80003es2lan, + .read = e1000e_read_nvm_eerd, + .release = e1000_release_nvm_80003es2lan, + .update = e1000e_update_nvm_checksum_generic, .valid_led_default = e1000e_valid_led_default, - .validate_nvm = e1000e_validate_nvm_checksum_generic, - .write_nvm = e1000_write_nvm_80003es2lan, + .validate = e1000e_validate_nvm_checksum_generic, + .write = e1000_write_nvm_80003es2lan, }; struct e1000_info e1000_es2_info = { diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index 44808b053fc..842d8e7e9c2 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -755,34 +755,34 @@ struct e1000_mac_operations { /* Function pointers for the PHY. */ struct e1000_phy_operations { - s32 (*acquire_phy)(struct e1000_hw *); + s32 (*acquire)(struct e1000_hw *); + s32 (*cfg_on_link_up)(struct e1000_hw *); s32 (*check_polarity)(struct e1000_hw *); s32 (*check_reset_block)(struct e1000_hw *); - s32 (*commit_phy)(struct e1000_hw *); + s32 (*commit)(struct e1000_hw *); s32 (*force_speed_duplex)(struct e1000_hw *); s32 (*get_cfg_done)(struct e1000_hw *hw); s32 (*get_cable_length)(struct e1000_hw *); - s32 (*get_phy_info)(struct e1000_hw *); - s32 (*read_phy_reg)(struct e1000_hw *, u32, u16 *); - s32 (*read_phy_reg_locked)(struct e1000_hw *, u32, u16 *); - void (*release_phy)(struct e1000_hw *); - s32 (*reset_phy)(struct e1000_hw *); + s32 (*get_info)(struct e1000_hw *); + s32 (*read_reg)(struct e1000_hw *, u32, u16 *); + s32 (*read_reg_locked)(struct e1000_hw *, u32, u16 *); + void (*release)(struct e1000_hw *); + s32 (*reset)(struct e1000_hw *); s32 (*set_d0_lplu_state)(struct e1000_hw *, bool); s32 (*set_d3_lplu_state)(struct e1000_hw *, bool); - s32 (*write_phy_reg)(struct e1000_hw *, u32, u16); - s32 (*write_phy_reg_locked)(struct e1000_hw *, u32, u16); - s32 (*cfg_on_link_up)(struct e1000_hw *); + s32 (*write_reg)(struct e1000_hw *, u32, u16); + s32 (*write_reg_locked)(struct e1000_hw *, u32, u16); }; /* Function pointers for the NVM. */ struct e1000_nvm_operations { - s32 (*acquire_nvm)(struct e1000_hw *); - s32 (*read_nvm)(struct e1000_hw *, u16, u16, u16 *); - void (*release_nvm)(struct e1000_hw *); - s32 (*update_nvm)(struct e1000_hw *); + s32 (*acquire)(struct e1000_hw *); + s32 (*read)(struct e1000_hw *, u16, u16, u16 *); + void (*release)(struct e1000_hw *); + s32 (*update)(struct e1000_hw *); s32 (*valid_led_default)(struct e1000_hw *, u16 *); - s32 (*validate_nvm)(struct e1000_hw *); - s32 (*write_nvm)(struct e1000_hw *, u16, u16, u16 *); + s32 (*validate)(struct e1000_hw *); + s32 (*write)(struct e1000_hw *, u16, u16, u16 *); }; struct e1000_mac_info { diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 101a2714467..dd94fc2e4b8 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -260,12 +260,12 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) phy->reset_delay_us = 100; phy->ops.check_polarity = e1000_check_polarity_ife_ich8lan; - phy->ops.read_phy_reg = e1000_read_phy_reg_hv; - phy->ops.read_phy_reg_locked = e1000_read_phy_reg_hv_locked; + phy->ops.read_reg = e1000_read_phy_reg_hv; + phy->ops.read_reg_locked = e1000_read_phy_reg_hv_locked; phy->ops.set_d0_lplu_state = e1000_set_lplu_state_pchlan; phy->ops.set_d3_lplu_state = e1000_set_lplu_state_pchlan; - phy->ops.write_phy_reg = e1000_write_phy_reg_hv; - phy->ops.write_phy_reg_locked = e1000_write_phy_reg_hv_locked; + phy->ops.write_reg = e1000_write_phy_reg_hv; + phy->ops.write_reg_locked = e1000_write_phy_reg_hv_locked; phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; phy->id = e1000_phy_unknown; @@ -277,8 +277,8 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_82577; phy->ops.get_cable_length = e1000_get_cable_length_82577; - phy->ops.get_phy_info = e1000_get_phy_info_82577; - phy->ops.commit_phy = e1000e_phy_sw_reset; + phy->ops.get_info = e1000_get_phy_info_82577; + phy->ops.commit = e1000e_phy_sw_reset; } return ret_val; @@ -305,8 +305,8 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw) */ ret_val = e1000e_determine_phy_address(hw); if (ret_val) { - hw->phy.ops.write_phy_reg = e1000e_write_phy_reg_bm; - hw->phy.ops.read_phy_reg = e1000e_read_phy_reg_bm; + phy->ops.write_reg = e1000e_write_phy_reg_bm; + phy->ops.read_reg = e1000e_read_phy_reg_bm; ret_val = e1000e_determine_phy_address(hw); if (ret_val) return ret_val; @@ -326,8 +326,8 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw) case IGP03E1000_E_PHY_ID: phy->type = e1000_phy_igp_3; phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; - phy->ops.read_phy_reg_locked = e1000e_read_phy_reg_igp_locked; - phy->ops.write_phy_reg_locked = e1000e_write_phy_reg_igp_locked; + phy->ops.read_reg_locked = e1000e_read_phy_reg_igp_locked; + phy->ops.write_reg_locked = e1000e_write_phy_reg_igp_locked; break; case IFE_E_PHY_ID: case IFE_PLUS_E_PHY_ID: @@ -338,9 +338,9 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw) case BME1000_E_PHY_ID: phy->type = e1000_phy_bm; phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; - hw->phy.ops.read_phy_reg = e1000e_read_phy_reg_bm; - hw->phy.ops.write_phy_reg = e1000e_write_phy_reg_bm; - hw->phy.ops.commit_phy = e1000e_phy_sw_reset; + phy->ops.read_reg = e1000e_read_phy_reg_bm; + phy->ops.write_reg = e1000e_write_phy_reg_bm; + phy->ops.commit = e1000e_phy_sw_reset; break; default: return -E1000_ERR_PHY; @@ -816,7 +816,7 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) s32 ret_val; u16 word_addr, reg_data, reg_addr, phy_page = 0; - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; @@ -912,7 +912,7 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) reg_addr &= PHY_REG_MASK; reg_addr |= phy_page; - ret_val = phy->ops.write_phy_reg_locked(hw, + ret_val = phy->ops.write_reg_locked(hw, (u32)reg_addr, reg_data); if (ret_val) @@ -921,7 +921,7 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) } out: - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); return ret_val; } @@ -945,15 +945,14 @@ static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link) goto out; /* Wrap the whole flow with the sw flag */ - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) goto out; /* Disable K1 when link is 1Gbps, otherwise use the NVM setting */ if (link) { if (hw->phy.type == e1000_phy_82578) { - ret_val = hw->phy.ops.read_phy_reg_locked(hw, - BM_CS_STATUS, + ret_val = hw->phy.ops.read_reg_locked(hw, BM_CS_STATUS, &status_reg); if (ret_val) goto release; @@ -969,8 +968,7 @@ static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link) } if (hw->phy.type == e1000_phy_82577) { - ret_val = hw->phy.ops.read_phy_reg_locked(hw, - HV_M_STATUS, + ret_val = hw->phy.ops.read_reg_locked(hw, HV_M_STATUS, &status_reg); if (ret_val) goto release; @@ -986,14 +984,14 @@ static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link) } /* Link stall fix for link up */ - ret_val = hw->phy.ops.write_phy_reg_locked(hw, PHY_REG(770, 19), + ret_val = hw->phy.ops.write_reg_locked(hw, PHY_REG(770, 19), 0x0100); if (ret_val) goto release; } else { /* Link stall fix for link down */ - ret_val = hw->phy.ops.write_phy_reg_locked(hw, PHY_REG(770, 19), + ret_val = hw->phy.ops.write_reg_locked(hw, PHY_REG(770, 19), 0x4100); if (ret_val) goto release; @@ -1002,7 +1000,7 @@ static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link) ret_val = e1000_configure_k1_ich8lan(hw, k1_enable); release: - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); out: return ret_val; } @@ -1078,7 +1076,7 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state) if (hw->mac.type != e1000_pchlan) return ret_val; - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; @@ -1092,7 +1090,7 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state) mac_reg = er32(PHY_CTRL); - ret_val = hw->phy.ops.read_phy_reg_locked(hw, HV_OEM_BITS, &oem_reg); + ret_val = hw->phy.ops.read_reg_locked(hw, HV_OEM_BITS, &oem_reg); if (ret_val) goto out; @@ -1113,10 +1111,10 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state) } /* Restart auto-neg to activate the bits */ oem_reg |= HV_OEM_BITS_RESTART_AN; - ret_val = hw->phy.ops.write_phy_reg_locked(hw, HV_OEM_BITS, oem_reg); + ret_val = hw->phy.ops.write_reg_locked(hw, HV_OEM_BITS, oem_reg); out: - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); return ret_val; } @@ -1159,7 +1157,7 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) } /* Select page 0 */ - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; @@ -1167,7 +1165,7 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0); if (ret_val) goto out; - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); /* * Configure the K1 Si workaround during phy reset assuming there is @@ -1667,7 +1665,7 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, goto out; } - nvm->ops.acquire_nvm(hw); + nvm->ops.acquire(hw); ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank); if (ret_val) { @@ -1693,7 +1691,7 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, } } - nvm->ops.release_nvm(hw); + nvm->ops.release(hw); out: if (ret_val) @@ -1951,14 +1949,14 @@ static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, return -E1000_ERR_NVM; } - nvm->ops.acquire_nvm(hw); + nvm->ops.acquire(hw); for (i = 0; i < words; i++) { dev_spec->shadow_ram[offset+i].modified = 1; dev_spec->shadow_ram[offset+i].value = data[i]; } - nvm->ops.release_nvm(hw); + nvm->ops.release(hw); return 0; } @@ -1989,7 +1987,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) if (nvm->type != e1000_nvm_flash_sw) goto out; - nvm->ops.acquire_nvm(hw); + nvm->ops.acquire(hw); /* * We're writing to the opposite bank so if we're on bank 1, @@ -2007,7 +2005,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) old_bank_offset = 0; ret_val = e1000_erase_flash_bank_ich8lan(hw, 1); if (ret_val) { - nvm->ops.release_nvm(hw); + nvm->ops.release(hw); goto out; } } else { @@ -2015,7 +2013,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) new_bank_offset = 0; ret_val = e1000_erase_flash_bank_ich8lan(hw, 0); if (ret_val) { - nvm->ops.release_nvm(hw); + nvm->ops.release(hw); goto out; } } @@ -2073,7 +2071,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) if (ret_val) { /* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */ e_dbg("Flash commit failed.\n"); - nvm->ops.release_nvm(hw); + nvm->ops.release(hw); goto out; } @@ -2086,7 +2084,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) act_offset = new_bank_offset + E1000_ICH_NVM_SIG_WORD; ret_val = e1000_read_flash_word_ich8lan(hw, act_offset, &data); if (ret_val) { - nvm->ops.release_nvm(hw); + nvm->ops.release(hw); goto out; } data &= 0xBFFF; @@ -2094,7 +2092,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) act_offset * 2 + 1, (u8)(data >> 8)); if (ret_val) { - nvm->ops.release_nvm(hw); + nvm->ops.release(hw); goto out; } @@ -2107,7 +2105,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) act_offset = (old_bank_offset + E1000_ICH_NVM_SIG_WORD) * 2 + 1; ret_val = e1000_retry_write_flash_byte_ich8lan(hw, act_offset, 0); if (ret_val) { - nvm->ops.release_nvm(hw); + nvm->ops.release(hw); goto out; } @@ -2117,7 +2115,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) dev_spec->shadow_ram[i].value = 0xFFFF; } - nvm->ops.release_nvm(hw); + nvm->ops.release(hw); /* * Reload the EEPROM, or else modifications will not appear @@ -2186,7 +2184,7 @@ void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw) union ich8_hws_flash_status hsfsts; u32 gfpreg; - nvm->ops.acquire_nvm(hw); + nvm->ops.acquire(hw); gfpreg = er32flash(ICH_FLASH_GFPREG); @@ -2207,7 +2205,7 @@ void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw) hsfsts.hsf_status.flockdn = true; ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval); - nvm->ops.release_nvm(hw); + nvm->ops.release(hw); } /** @@ -2743,7 +2741,7 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) * Reset the phy after disabling host wakeup to reset the Rx buffer. */ if (hw->phy.type == e1000_phy_82578) { - hw->phy.ops.read_phy_reg(hw, BM_WUC, &i); + hw->phy.ops.read_reg(hw, BM_WUC, &i); ret_val = e1000_phy_hw_reset_ich8lan(hw); if (ret_val) return ret_val; @@ -2890,7 +2888,7 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw) ew32(FCTTV, hw->fc.pause_time); if ((hw->phy.type == e1000_phy_82578) || (hw->phy.type == e1000_phy_82577)) { - ret_val = hw->phy.ops.write_phy_reg(hw, + ret_val = hw->phy.ops.write_reg(hw, PHY_REG(BM_PORT_CTRL_PAGE, 27), hw->fc.pause_time); if (ret_val) @@ -2953,7 +2951,7 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw) return ret_val; break; case e1000_phy_ife: - ret_val = hw->phy.ops.read_phy_reg(hw, IFE_PHY_MDIX_CONTROL, + ret_val = hw->phy.ops.read_reg(hw, IFE_PHY_MDIX_CONTROL, ®_data); if (ret_val) return ret_val; @@ -2972,7 +2970,7 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw) reg_data |= IFE_PMC_AUTO_MDIX; break; } - ret_val = hw->phy.ops.write_phy_reg(hw, IFE_PHY_MDIX_CONTROL, + ret_val = hw->phy.ops.write_reg(hw, IFE_PHY_MDIX_CONTROL, reg_data); if (ret_val) return ret_val; @@ -3274,7 +3272,7 @@ static s32 e1000_led_off_ich8lan(struct e1000_hw *hw) **/ static s32 e1000_setup_led_pchlan(struct e1000_hw *hw) { - return hw->phy.ops.write_phy_reg(hw, HV_LED_CONFIG, + return hw->phy.ops.write_reg(hw, HV_LED_CONFIG, (u16)hw->mac.ledctl_mode1); } @@ -3286,7 +3284,7 @@ static s32 e1000_setup_led_pchlan(struct e1000_hw *hw) **/ static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw) { - return hw->phy.ops.write_phy_reg(hw, HV_LED_CONFIG, + return hw->phy.ops.write_reg(hw, HV_LED_CONFIG, (u16)hw->mac.ledctl_default); } @@ -3318,7 +3316,7 @@ static s32 e1000_led_on_pchlan(struct e1000_hw *hw) } } - return hw->phy.ops.write_phy_reg(hw, HV_LED_CONFIG, data); + return hw->phy.ops.write_reg(hw, HV_LED_CONFIG, data); } /** @@ -3349,7 +3347,7 @@ static s32 e1000_led_off_pchlan(struct e1000_hw *hw) } } - return hw->phy.ops.write_phy_reg(hw, HV_LED_CONFIG, data); + return hw->phy.ops.write_reg(hw, HV_LED_CONFIG, data); } /** @@ -3426,20 +3424,20 @@ static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw) /* Clear PHY statistics registers */ if ((hw->phy.type == e1000_phy_82578) || (hw->phy.type == e1000_phy_82577)) { - hw->phy.ops.read_phy_reg(hw, HV_SCC_UPPER, &phy_data); - hw->phy.ops.read_phy_reg(hw, HV_SCC_LOWER, &phy_data); - hw->phy.ops.read_phy_reg(hw, HV_ECOL_UPPER, &phy_data); - hw->phy.ops.read_phy_reg(hw, HV_ECOL_LOWER, &phy_data); - hw->phy.ops.read_phy_reg(hw, HV_MCC_UPPER, &phy_data); - hw->phy.ops.read_phy_reg(hw, HV_MCC_LOWER, &phy_data); - hw->phy.ops.read_phy_reg(hw, HV_LATECOL_UPPER, &phy_data); - hw->phy.ops.read_phy_reg(hw, HV_LATECOL_LOWER, &phy_data); - hw->phy.ops.read_phy_reg(hw, HV_COLC_UPPER, &phy_data); - hw->phy.ops.read_phy_reg(hw, HV_COLC_LOWER, &phy_data); - hw->phy.ops.read_phy_reg(hw, HV_DC_UPPER, &phy_data); - hw->phy.ops.read_phy_reg(hw, HV_DC_LOWER, &phy_data); - hw->phy.ops.read_phy_reg(hw, HV_TNCRS_UPPER, &phy_data); - hw->phy.ops.read_phy_reg(hw, HV_TNCRS_LOWER, &phy_data); + hw->phy.ops.read_reg(hw, HV_SCC_UPPER, &phy_data); + hw->phy.ops.read_reg(hw, HV_SCC_LOWER, &phy_data); + hw->phy.ops.read_reg(hw, HV_ECOL_UPPER, &phy_data); + hw->phy.ops.read_reg(hw, HV_ECOL_LOWER, &phy_data); + hw->phy.ops.read_reg(hw, HV_MCC_UPPER, &phy_data); + hw->phy.ops.read_reg(hw, HV_MCC_LOWER, &phy_data); + hw->phy.ops.read_reg(hw, HV_LATECOL_UPPER, &phy_data); + hw->phy.ops.read_reg(hw, HV_LATECOL_LOWER, &phy_data); + hw->phy.ops.read_reg(hw, HV_COLC_UPPER, &phy_data); + hw->phy.ops.read_reg(hw, HV_COLC_LOWER, &phy_data); + hw->phy.ops.read_reg(hw, HV_DC_UPPER, &phy_data); + hw->phy.ops.read_reg(hw, HV_DC_LOWER, &phy_data); + hw->phy.ops.read_reg(hw, HV_TNCRS_UPPER, &phy_data); + hw->phy.ops.read_reg(hw, HV_TNCRS_LOWER, &phy_data); } } @@ -3462,29 +3460,29 @@ static struct e1000_mac_operations ich8_mac_ops = { }; static struct e1000_phy_operations ich8_phy_ops = { - .acquire_phy = e1000_acquire_swflag_ich8lan, + .acquire = e1000_acquire_swflag_ich8lan, .check_reset_block = e1000_check_reset_block_ich8lan, - .commit_phy = NULL, + .commit = NULL, .force_speed_duplex = e1000_phy_force_speed_duplex_ich8lan, .get_cfg_done = e1000_get_cfg_done_ich8lan, .get_cable_length = e1000e_get_cable_length_igp_2, - .get_phy_info = e1000_get_phy_info_ich8lan, - .read_phy_reg = e1000e_read_phy_reg_igp, - .release_phy = e1000_release_swflag_ich8lan, - .reset_phy = e1000_phy_hw_reset_ich8lan, + .get_info = e1000_get_phy_info_ich8lan, + .read_reg = e1000e_read_phy_reg_igp, + .release = e1000_release_swflag_ich8lan, + .reset = e1000_phy_hw_reset_ich8lan, .set_d0_lplu_state = e1000_set_d0_lplu_state_ich8lan, .set_d3_lplu_state = e1000_set_d3_lplu_state_ich8lan, - .write_phy_reg = e1000e_write_phy_reg_igp, + .write_reg = e1000e_write_phy_reg_igp, }; static struct e1000_nvm_operations ich8_nvm_ops = { - .acquire_nvm = e1000_acquire_nvm_ich8lan, - .read_nvm = e1000_read_nvm_ich8lan, - .release_nvm = e1000_release_nvm_ich8lan, - .update_nvm = e1000_update_nvm_checksum_ich8lan, + .acquire = e1000_acquire_nvm_ich8lan, + .read = e1000_read_nvm_ich8lan, + .release = e1000_release_nvm_ich8lan, + .update = e1000_update_nvm_checksum_ich8lan, .valid_led_default = e1000_valid_led_default_ich8lan, - .validate_nvm = e1000_validate_nvm_checksum_ich8lan, - .write_nvm = e1000_write_nvm_ich8lan, + .validate = e1000_validate_nvm_checksum_ich8lan, + .write = e1000_write_nvm_ich8lan, }; struct e1000_info e1000_ich8_info = { diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index fa31c51e564..f664fc03aa2 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -1985,7 +1985,7 @@ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) return -E1000_ERR_NVM; } - ret_val = nvm->ops.acquire_nvm(hw); + ret_val = nvm->ops.acquire(hw); if (ret_val) return ret_val; @@ -1996,7 +1996,7 @@ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) ret_val = e1000_ready_nvm_eeprom(hw); if (ret_val) { - nvm->ops.release_nvm(hw); + nvm->ops.release(hw); return ret_val; } @@ -2035,7 +2035,7 @@ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) } msleep(10); - nvm->ops.release_nvm(hw); + nvm->ops.release(hw); return 0; } diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 0b5352307f1..6eb96935f8a 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -4419,7 +4419,7 @@ static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc) e1e_wphy(&adapter->hw, BM_WUC, E1000_WUC_PME_EN); /* activate PHY wakeup */ - retval = hw->phy.ops.acquire_phy(hw); + retval = hw->phy.ops.acquire(hw); if (retval) { e_err("Could not acquire PHY\n"); return retval; @@ -4436,7 +4436,7 @@ static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc) if (retval) e_err("Could not set PHY Host Wakeup bit\n"); out: - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); return retval; } diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index cff1df20403..765dc389561 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -131,7 +131,7 @@ s32 e1000e_get_phy_id(struct e1000_hw *hw) u16 phy_id; u16 retry_count = 0; - if (!(phy->ops.read_phy_reg)) + if (!(phy->ops.read_reg)) goto out; while (retry_count < 2) { @@ -157,24 +157,24 @@ s32 e1000e_get_phy_id(struct e1000_hw *hw) * MDIC mode. No harm in trying again in this case since * the PHY ID is unknown at this point anyway */ - ret_val = phy->ops.acquire_phy(hw); + ret_val = phy->ops.acquire(hw); if (ret_val) goto out; ret_val = e1000_set_mdio_slow_mode_hv(hw, true); if (ret_val) goto out; - phy->ops.release_phy(hw); + phy->ops.release(hw); retry_count++; } out: /* Revert to MDIO fast mode, if applicable */ if (retry_count) { - ret_val = phy->ops.acquire_phy(hw); + ret_val = phy->ops.acquire(hw); if (ret_val) return ret_val; ret_val = e1000_set_mdio_slow_mode_hv(hw, false); - phy->ops.release_phy(hw); + phy->ops.release(hw); } return ret_val; @@ -318,14 +318,14 @@ s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data) { s32 ret_val; - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, data); - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); return ret_val; } @@ -343,14 +343,14 @@ s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data) { s32 ret_val; - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, data); - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); return ret_val; } @@ -372,10 +372,10 @@ static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data, s32 ret_val = 0; if (!locked) { - if (!(hw->phy.ops.acquire_phy)) + if (!(hw->phy.ops.acquire)) goto out; - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) goto out; } @@ -393,7 +393,7 @@ static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data, release: if (!locked) - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); out: return ret_val; } @@ -443,10 +443,10 @@ static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data, s32 ret_val = 0; if (!locked) { - if (!(hw->phy.ops.acquire_phy)) + if (!(hw->phy.ops.acquire)) goto out; - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) goto out; } @@ -464,7 +464,7 @@ static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data, release: if (!locked) - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); out: return ret_val; @@ -516,10 +516,10 @@ static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data, s32 ret_val = 0; if (!locked) { - if (!(hw->phy.ops.acquire_phy)) + if (!(hw->phy.ops.acquire)) goto out; - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) goto out; } @@ -534,7 +534,7 @@ static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data, *data = (u16)kmrnctrlsta; if (!locked) - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); out: return ret_val; @@ -588,10 +588,10 @@ static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data, s32 ret_val = 0; if (!locked) { - if (!(hw->phy.ops.acquire_phy)) + if (!(hw->phy.ops.acquire)) goto out; - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) goto out; } @@ -603,7 +603,7 @@ static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data, udelay(2); if (!locked) - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); out: return ret_val; @@ -650,7 +650,7 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw) u16 phy_data; /* Enable CRS on TX. This must be set for half-duplex operation. */ - ret_val = phy->ops.read_phy_reg(hw, I82577_CFG_REG, &phy_data); + ret_val = phy->ops.read_reg(hw, I82577_CFG_REG, &phy_data); if (ret_val) goto out; @@ -659,16 +659,16 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw) /* Enable downshift */ phy_data |= I82577_CFG_ENABLE_DOWNSHIFT; - ret_val = phy->ops.write_phy_reg(hw, I82577_CFG_REG, phy_data); + ret_val = phy->ops.write_reg(hw, I82577_CFG_REG, phy_data); if (ret_val) goto out; /* Set number of link attempts before downshift */ - ret_val = phy->ops.read_phy_reg(hw, I82577_CTRL_REG, &phy_data); + ret_val = phy->ops.read_reg(hw, I82577_CTRL_REG, &phy_data); if (ret_val) goto out; phy_data &= ~I82577_CTRL_DOWNSHIFT_MASK; - ret_val = phy->ops.write_phy_reg(hw, I82577_CTRL_REG, phy_data); + ret_val = phy->ops.write_reg(hw, I82577_CTRL_REG, phy_data); out: return ret_val; @@ -791,7 +791,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw) } if (phy->type == e1000_phy_82578) { - ret_val = phy->ops.read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, + ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data); if (ret_val) return ret_val; @@ -799,7 +799,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw) /* 82578 PHY - set the downshift count to 1x. */ phy_data |= I82578_EPSCR_DOWNSHIFT_ENABLE; phy_data &= ~I82578_EPSCR_DOWNSHIFT_COUNTER_MASK; - ret_val = phy->ops.write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, + ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data); if (ret_val) return ret_val; @@ -1990,7 +1990,7 @@ s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw) if (ret_val) return 0; - ret_val = phy->ops.acquire_phy(hw); + ret_val = phy->ops.acquire(hw); if (ret_val) return ret_val; @@ -2005,7 +2005,7 @@ s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw) udelay(150); - phy->ops.release_phy(hw); + phy->ops.release(hw); return e1000_get_phy_cfg_done(hw); } @@ -2256,7 +2256,7 @@ s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data) u32 page = offset >> IGP_PAGE_SHIFT; u32 page_shift = 0; - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; @@ -2294,7 +2294,7 @@ s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data) data); out: - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); return ret_val; } @@ -2315,7 +2315,7 @@ s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data) u32 page = offset >> IGP_PAGE_SHIFT; u32 page_shift = 0; - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; @@ -2352,7 +2352,7 @@ s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data) ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, data); out: - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); return ret_val; } @@ -2371,7 +2371,7 @@ s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data) s32 ret_val; u16 page = (u16)(offset >> IGP_PAGE_SHIFT); - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; @@ -2397,7 +2397,7 @@ s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data) ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, data); out: - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); return ret_val; } @@ -2415,7 +2415,7 @@ s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data) s32 ret_val; u16 page = (u16)(offset >> IGP_PAGE_SHIFT); - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; @@ -2441,7 +2441,7 @@ s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data) data); out: - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); return ret_val; } @@ -2544,8 +2544,8 @@ out: **/ s32 e1000e_commit_phy(struct e1000_hw *hw) { - if (hw->phy.ops.commit_phy) - return hw->phy.ops.commit_phy(hw); + if (hw->phy.ops.commit) + return hw->phy.ops.commit(hw); return 0; } @@ -2624,7 +2624,7 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data, bool in_slow_mode = false; if (!locked) { - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; } @@ -2681,7 +2681,7 @@ out: ret_val = e1000_set_mdio_slow_mode_hv(hw, false); if (!locked) - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); return ret_val; } @@ -2734,7 +2734,7 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data, bool in_slow_mode = false; if (!locked) { - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; } @@ -2808,7 +2808,7 @@ out: ret_val = e1000_set_mdio_slow_mode_hv(hw, false); if (!locked) - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); return ret_val; } @@ -2923,12 +2923,12 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw) goto out; /* Do not apply workaround if in PHY loopback bit 14 set */ - hw->phy.ops.read_phy_reg(hw, PHY_CONTROL, &data); + hw->phy.ops.read_reg(hw, PHY_CONTROL, &data); if (data & PHY_CONTROL_LB) goto out; /* check if link is up and at 1Gbps */ - ret_val = hw->phy.ops.read_phy_reg(hw, BM_CS_STATUS, &data); + ret_val = hw->phy.ops.read_reg(hw, BM_CS_STATUS, &data); if (ret_val) goto out; @@ -2944,13 +2944,13 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw) mdelay(200); /* flush the packets in the fifo buffer */ - ret_val = hw->phy.ops.write_phy_reg(hw, HV_MUX_DATA_CTRL, + ret_val = hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL, HV_MUX_DATA_CTRL_GEN_TO_MAC | HV_MUX_DATA_CTRL_FORCE_SPEED); if (ret_val) goto out; - ret_val = hw->phy.ops.write_phy_reg(hw, HV_MUX_DATA_CTRL, + ret_val = hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL, HV_MUX_DATA_CTRL_GEN_TO_MAC); out: @@ -2971,7 +2971,7 @@ s32 e1000_check_polarity_82577(struct e1000_hw *hw) s32 ret_val; u16 data; - ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_STATUS_2, &data); + ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data); if (!ret_val) phy->cable_polarity = (data & I82577_PHY_STATUS2_REV_POLARITY) @@ -2996,13 +2996,13 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw) u16 phy_data; bool link; - ret_val = phy->ops.read_phy_reg(hw, PHY_CONTROL, &phy_data); + ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data); if (ret_val) goto out; e1000e_phy_force_speed_duplex_setup(hw, &phy_data); - ret_val = phy->ops.write_phy_reg(hw, PHY_CONTROL, phy_data); + ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data); if (ret_val) goto out; @@ -3010,14 +3010,14 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw) * Clear Auto-Crossover to force MDI manually. 82577 requires MDI * forced whenever speed and duplex are forced. */ - ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_CTRL_2, &phy_data); + ret_val = phy->ops.read_reg(hw, I82577_PHY_CTRL_2, &phy_data); if (ret_val) goto out; phy_data &= ~I82577_PHY_CTRL2_AUTO_MDIX; phy_data &= ~I82577_PHY_CTRL2_FORCE_MDI_MDIX; - ret_val = phy->ops.write_phy_reg(hw, I82577_PHY_CTRL_2, phy_data); + ret_val = phy->ops.write_reg(hw, I82577_PHY_CTRL_2, phy_data); if (ret_val) goto out; @@ -3083,7 +3083,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw) if (ret_val) goto out; - ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_STATUS_2, &data); + ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data); if (ret_val) goto out; @@ -3095,7 +3095,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw) if (ret_val) goto out; - ret_val = phy->ops.read_phy_reg(hw, PHY_1000T_STATUS, &data); + ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data); if (ret_val) goto out; @@ -3129,7 +3129,7 @@ s32 e1000_get_cable_length_82577(struct e1000_hw *hw) s32 ret_val; u16 phy_data, length; - ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_DIAG_STATUS, &phy_data); + ret_val = phy->ops.read_reg(hw, I82577_PHY_DIAG_STATUS, &phy_data); if (ret_val) goto out; -- cgit v1.2.3-70-g09d2 From c7e54b1bf90480ca4bdfd1491ac6c4b7bfe07c03 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Fri, 20 Nov 2009 23:25:45 +0000 Subject: e1000e: update copyright information Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/82571.c | 2 +- drivers/net/e1000e/defines.h | 2 +- drivers/net/e1000e/e1000.h | 2 +- drivers/net/e1000e/es2lan.c | 2 +- drivers/net/e1000e/ethtool.c | 2 +- drivers/net/e1000e/hw.h | 2 +- drivers/net/e1000e/ich8lan.c | 2 +- drivers/net/e1000e/lib.c | 2 +- drivers/net/e1000e/netdev.c | 4 ++-- drivers/net/e1000e/param.c | 2 +- drivers/net/e1000e/phy.c | 2 +- 11 files changed, 12 insertions(+), 12 deletions(-) (limited to 'drivers/net/e1000e/phy.c') diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index 6fe1b3c73c1..a984bc33fd0 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h index 1190167a8b3..86d2809763c 100644 --- a/drivers/net/e1000e/defines.h +++ b/drivers/net/e1000e/defines.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 602598c8c18..5ac8675b0c5 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c index d024e20bc6a..103dc64742c 100644 --- a/drivers/net/e1000e/es2lan.c +++ b/drivers/net/e1000e/es2lan.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index fd7921482d2..b6243cad310 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index 842d8e7e9c2..426155c15ce 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index dd94fc2e4b8..191a4e39d28 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index f664fc03aa2..0c6ad0e6717 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 6eb96935f8a..a5716760c0e 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -5364,7 +5364,7 @@ static int __init e1000_init_module(void) int ret; printk(KERN_INFO "%s: Intel(R) PRO/1000 Network Driver - %s\n", e1000e_driver_name, e1000e_driver_version); - printk(KERN_INFO "%s: Copyright (c) 1999-2008 Intel Corporation.\n", + printk(KERN_INFO "%s: Copyright (c) 1999 - 2009 Intel Corporation.\n", e1000e_driver_name); ret = pci_register_driver(&e1000_driver); pm_qos_add_requirement(PM_QOS_CPU_DMA_LATENCY, e1000e_driver_name, diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c index 1342e0b1815..2e399778cae 100644 --- a/drivers/net/e1000e/param.c +++ b/drivers/net/e1000e/param.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 765dc389561..440f366b73f 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, -- cgit v1.2.3-70-g09d2 From 564ea9bba1a1380d5474504bcd943ee84075534f Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Fri, 20 Nov 2009 23:26:44 +0000 Subject: e1000e: set bools to true/false instead of 1/0 Set booleans to 'true' or 'false' to make it clear it is a boolean. Also change instances of TRUE/FALSE in comments to lowercase true/false. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/82571.c | 7 ++++--- drivers/net/e1000e/es2lan.c | 3 ++- drivers/net/e1000e/ich8lan.c | 18 +++++++++--------- drivers/net/e1000e/lib.c | 24 ++++++++++++------------ drivers/net/e1000e/phy.c | 6 +++--- 5 files changed, 30 insertions(+), 28 deletions(-) (limited to 'drivers/net/e1000e/phy.c') diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index 0e8aa3441b9..468dd7d4fca 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -230,7 +230,8 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter) /* Set rar entry count */ mac->rar_entry_count = E1000_RAR_ENTRIES; /* Set if manageability features are enabled. */ - mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK) ? 1 : 0; + mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK) + ? true : false; /* check for link */ switch (hw->phy.media_type) { @@ -753,7 +754,7 @@ static s32 e1000_get_cfg_done_82571(struct e1000_hw *hw) /** * e1000_set_d0_lplu_state_82571 - Set Low Power Linkup D0 state * @hw: pointer to the HW structure - * @active: TRUE to enable LPLU, FALSE to disable + * @active: true to enable LPLU, false to disable * * Sets the LPLU D0 state according to the active flag. When activating LPLU * this function also disables smart speed and vice versa. LPLU will not be @@ -1521,7 +1522,7 @@ static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data) bool e1000e_get_laa_state_82571(struct e1000_hw *hw) { if (hw->mac.type != e1000_82571) - return 0; + return false; return hw->dev_spec.e82571.laa_is_present; } diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c index 2d1415610d7..795d433e656 100644 --- a/drivers/net/e1000e/es2lan.c +++ b/drivers/net/e1000e/es2lan.c @@ -213,7 +213,8 @@ static s32 e1000_init_mac_params_80003es2lan(struct e1000_adapter *adapter) /* Set rar entry count */ mac->rar_entry_count = E1000_RAR_ENTRIES; /* Set if manageability features are enabled. */ - mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK) ? 1 : 0; + mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK) + ? true : false; /* check for link */ switch (hw->phy.media_type) { diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 191a4e39d28..f8ee0f29d23 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -401,7 +401,7 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw) /* Clear shadow ram */ for (i = 0; i < nvm->word_size; i++) { - dev_spec->shadow_ram[i].modified = 0; + dev_spec->shadow_ram[i].modified = false; dev_spec->shadow_ram[i].value = 0xFFFF; } @@ -430,7 +430,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter) if (mac->type == e1000_ich8lan) mac->rar_entry_count--; /* Set if manageability features are enabled. */ - mac->arc_subsystem_valid = 1; + mac->arc_subsystem_valid = true; /* LED operations */ switch (mac->type) { @@ -464,7 +464,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter) /* Enable PCS Lock-loss workaround for ICH8 */ if (mac->type == e1000_ich8lan) - e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, 1); + e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, true); return 0; } @@ -1403,7 +1403,7 @@ out: /** * e1000_set_d0_lplu_state_ich8lan - Set Low Power Linkup D0 state * @hw: pointer to the HW structure - * @active: TRUE to enable LPLU, FALSE to disable + * @active: true to enable LPLU, false to disable * * Sets the LPLU D0 state according to the active flag. When * activating LPLU this function also disables smart speed @@ -1489,7 +1489,7 @@ static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active) /** * e1000_set_d3_lplu_state_ich8lan - Set Low Power Linkup D3 state * @hw: pointer to the HW structure - * @active: TRUE to enable LPLU, FALSE to disable + * @active: true to enable LPLU, false to disable * * Sets the LPLU D3 state according to the active flag. When * activating LPLU this function also disables smart speed @@ -1952,7 +1952,7 @@ static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, nvm->ops.acquire(hw); for (i = 0; i < words; i++) { - dev_spec->shadow_ram[offset+i].modified = 1; + dev_spec->shadow_ram[offset+i].modified = true; dev_spec->shadow_ram[offset+i].value = data[i]; } @@ -2111,7 +2111,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) /* Great! Everything worked, we can now clear the cached entries. */ for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) { - dev_spec->shadow_ram[i].modified = 0; + dev_spec->shadow_ram[i].modified = false; dev_spec->shadow_ram[i].value = 0xFFFF; } @@ -3083,8 +3083,8 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw) * @hw: pointer to the HW structure * @state: boolean value used to set the current Kumeran workaround state * - * If ICH8, set the current Kumeran workaround state (enabled - TRUE - * /disabled - FALSE). + * If ICH8, set the current Kumeran workaround state (enabled - true + * /disabled - false). **/ void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw, bool state) diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index 0c6ad0e6717..d173bf88cc9 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -371,7 +371,7 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw) if (!link) return ret_val; /* No link detected */ - mac->get_link_status = 0; + mac->get_link_status = false; /* * Check if there was DownShift, must be checked @@ -1603,7 +1603,7 @@ void e1000e_reset_adaptive(struct e1000_hw *hw) mac->ifs_step_size = IFS_STEP; mac->ifs_ratio = IFS_RATIO; - mac->in_ifs_mode = 0; + mac->in_ifs_mode = false; ew32(AIT, 0); } @@ -1620,7 +1620,7 @@ void e1000e_update_adaptive(struct e1000_hw *hw) if ((mac->collision_delta * mac->ifs_ratio) > mac->tx_packet_delta) { if (mac->tx_packet_delta > MIN_NUM_XMITS) { - mac->in_ifs_mode = 1; + mac->in_ifs_mode = true; if (mac->current_ifs_val < mac->ifs_max_val) { if (!mac->current_ifs_val) mac->current_ifs_val = mac->ifs_min_val; @@ -1634,7 +1634,7 @@ void e1000e_update_adaptive(struct e1000_hw *hw) if (mac->in_ifs_mode && (mac->tx_packet_delta <= MIN_NUM_XMITS)) { mac->current_ifs_val = 0; - mac->in_ifs_mode = 0; + mac->in_ifs_mode = false; ew32(AIT, 0); } } @@ -2277,7 +2277,7 @@ bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw) /* No manageability, no filtering */ if (!e1000e_check_mng_mode(hw)) { - hw->mac.tx_pkt_filtering = 0; + hw->mac.tx_pkt_filtering = false; return 0; } @@ -2287,7 +2287,7 @@ bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw) */ ret_val = e1000_mng_enable_host_if(hw); if (ret_val != 0) { - hw->mac.tx_pkt_filtering = 0; + hw->mac.tx_pkt_filtering = false; return ret_val; } @@ -2306,17 +2306,17 @@ bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw) * take the safe route of assuming Tx filtering is enabled. */ if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) { - hw->mac.tx_pkt_filtering = 1; + hw->mac.tx_pkt_filtering = true; return 1; } /* Cookie area is valid, make the final check for filtering. */ if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING)) { - hw->mac.tx_pkt_filtering = 0; + hw->mac.tx_pkt_filtering = false; return 0; } - hw->mac.tx_pkt_filtering = 1; + hw->mac.tx_pkt_filtering = true; return 1; } @@ -2473,7 +2473,7 @@ bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw) { u32 manc; u32 fwsm, factps; - bool ret_val = 0; + bool ret_val = false; manc = er32(MANC); @@ -2488,13 +2488,13 @@ bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw) if (!(factps & E1000_FACTPS_MNGCG) && ((fwsm & E1000_FWSM_MODE_MASK) == (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT))) { - ret_val = 1; + ret_val = true; return ret_val; } } else { if ((manc & E1000_MANC_SMBUS_EN) && !(manc & E1000_MANC_ASF_EN)) { - ret_val = 1; + ret_val = true; return ret_val; } } diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 440f366b73f..99d53fae430 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -834,7 +834,7 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw) msleep(100); /* disable lplu d0 during driver init */ - ret_val = e1000_set_d0_lplu_state(hw, 0); + ret_val = e1000_set_d0_lplu_state(hw, false); if (ret_val) { e_dbg("Error Disabling LPLU D0\n"); return ret_val; @@ -1545,7 +1545,7 @@ s32 e1000e_check_downshift(struct e1000_hw *hw) break; default: /* speed downshift not supported */ - phy->speed_downgraded = 0; + phy->speed_downgraded = false; return 0; } @@ -1907,7 +1907,7 @@ s32 e1000e_get_phy_info_igp(struct e1000_hw *hw) return -E1000_ERR_CONFIG; } - phy->polarity_correction = 1; + phy->polarity_correction = true; ret_val = e1000_check_polarity_igp(hw); if (ret_val) -- cgit v1.2.3-70-g09d2 From eb656d4552a6c9de5fdcee4a376b171f57b8a4a2 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Tue, 1 Dec 2009 15:47:02 +0000 Subject: e1000e: guard against buffer overflow in cable length tables Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/es2lan.c | 17 +++++++++++++---- drivers/net/e1000e/phy.c | 14 +++++++++++--- 2 files changed, 24 insertions(+), 7 deletions(-) (limited to 'drivers/net/e1000e/phy.c') diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c index 3ff932f02f2..3f435c16608 100644 --- a/drivers/net/e1000e/es2lan.c +++ b/drivers/net/e1000e/es2lan.c @@ -99,6 +99,8 @@ */ static const u16 e1000_gg82563_cable_length_table[] = { 0, 60, 115, 150, 150, 60, 115, 150, 180, 180, 0xFF }; +#define GG82563_CABLE_LENGTH_TABLE_SIZE \ + ARRAY_SIZE(e1000_gg82563_cable_length_table) static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw); static s32 e1000_acquire_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask); @@ -694,20 +696,27 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw) static s32 e1000_get_cable_length_80003es2lan(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; + s32 ret_val = 0; u16 phy_data, index; ret_val = e1e_rphy(hw, GG82563_PHY_DSP_DISTANCE, &phy_data); if (ret_val) - return ret_val; + goto out; index = phy_data & GG82563_DSPD_CABLE_LENGTH; + + if (index >= GG82563_CABLE_LENGTH_TABLE_SIZE - 5) { + ret_val = -E1000_ERR_PHY; + goto out; + } + phy->min_cable_length = e1000_gg82563_cable_length_table[index]; - phy->max_cable_length = e1000_gg82563_cable_length_table[index+5]; + phy->max_cable_length = e1000_gg82563_cable_length_table[index + 5]; phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2; - return 0; +out: + return ret_val; } /** diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 5cd01c691c5..9ce499734dc 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -44,6 +44,8 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset, /* Cable length tables */ static const u16 e1000_m88_cable_length_table[] = { 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED }; +#define M88E1000_CABLE_LENGTH_TABLE_SIZE \ + ARRAY_SIZE(e1000_m88_cable_length_table) static const u16 e1000_igp_2_cable_length_table[] = { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3, @@ -1717,15 +1719,21 @@ s32 e1000e_get_cable_length_m88(struct e1000_hw *hw) ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); if (ret_val) - return ret_val; + goto out; index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >> - M88E1000_PSSR_CABLE_LENGTH_SHIFT; + M88E1000_PSSR_CABLE_LENGTH_SHIFT; + if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) { + ret_val = -E1000_ERR_PHY; + goto out; + } + phy->min_cable_length = e1000_m88_cable_length_table[index]; - phy->max_cable_length = e1000_m88_cable_length_table[index+1]; + phy->max_cable_length = e1000_m88_cable_length_table[index + 1]; phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2; +out: return ret_val; } -- cgit v1.2.3-70-g09d2 From 17f208deb9bf88315aa72c08c866a235c399fb9a Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Tue, 1 Dec 2009 15:47:22 +0000 Subject: e1000e: provide family-specific PHY power up/down operations The different families (80003es2lan, 8257x, ICHx/PCH) supported by the driver each have their own conditions when the PHY can be powered down. This patch rewrites the PHY power up/down code to fit with the family- specific style used in the driver. All pre-existing calls to power up or down the PHY remain untouched. A new call to power down the PHY when removing the driver when the interface is down replaces the current call to reset the PHY in order to reduce power consumption. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/82571.c | 26 +++++++++++++++++++++++ drivers/net/e1000e/e1000.h | 2 ++ drivers/net/e1000e/es2lan.c | 21 +++++++++++++++++++ drivers/net/e1000e/hw.h | 2 ++ drivers/net/e1000e/ich8lan.c | 23 ++++++++++++++++++++ drivers/net/e1000e/netdev.c | 50 ++++++++++---------------------------------- drivers/net/e1000e/phy.c | 37 ++++++++++++++++++++++++++++++++ 7 files changed, 122 insertions(+), 39 deletions(-) (limited to 'drivers/net/e1000e/phy.c') diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index 8ea3ed7e536..26ea5d57a35 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -69,6 +69,7 @@ static void e1000_clear_vfta_82571(struct e1000_hw *hw); static bool e1000_check_mng_mode_82574(struct e1000_hw *hw); static s32 e1000_led_on_82574(struct e1000_hw *hw); static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw); +static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw); /** * e1000_init_phy_params_82571 - Init PHY func ptrs. @@ -88,6 +89,9 @@ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw) phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; phy->reset_delay_us = 100; + phy->ops.power_up = e1000_power_up_phy_copper; + phy->ops.power_down = e1000_power_down_phy_copper_82571; + switch (hw->mac.type) { case e1000_82571: case e1000_82572: @@ -1600,6 +1604,28 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw) return 0; } +/** + * e1000_power_down_phy_copper_82571 - Remove link during PHY power down + * @hw: pointer to the HW structure + * + * In the case of a PHY power down to save power, or to turn off link during a + * driver unload, or wake on lan is not enabled, remove the link. + **/ +static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + struct e1000_mac_info *mac = &hw->mac; + + if (!(phy->ops.check_reset_block)) + return; + + /* If the management interface is not enabled, then power down */ + if (!(mac->ops.check_mng_mode(hw) || phy->ops.check_reset_block(hw))) + e1000_power_down_phy_copper(hw); + + return; +} + /** * e1000_clear_hw_cntrs_82571 - Clear device specific hardware counters * @hw: pointer to the HW structure diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 4c08752b824..c4e861fb386 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -568,6 +568,8 @@ extern s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, extern s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, u32 usec_interval, bool *success); extern s32 e1000e_phy_reset_dsp(struct e1000_hw *hw); +extern void e1000_power_up_phy_copper(struct e1000_hw *hw); +extern void e1000_power_down_phy_copper(struct e1000_hw *hw); extern s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data); extern s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data); extern s32 e1000e_check_downshift(struct e1000_hw *hw); diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c index 3f435c16608..c7bc657b5da 100644 --- a/drivers/net/e1000e/es2lan.c +++ b/drivers/net/e1000e/es2lan.c @@ -114,6 +114,7 @@ static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, u16 *data); static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, u16 data); +static void e1000_power_down_phy_copper_80003es2lan(struct e1000_hw *hw); /** * e1000_init_phy_params_80003es2lan - Init ESB2 PHY func ptrs. @@ -127,6 +128,9 @@ static s32 e1000_init_phy_params_80003es2lan(struct e1000_hw *hw) if (hw->phy.media_type != e1000_media_type_copper) { phy->type = e1000_phy_none; return 0; + } else { + phy->ops.power_up = e1000_power_up_phy_copper; + phy->ops.power_down = e1000_power_down_phy_copper_80003es2lan; } phy->addr = 1; @@ -1302,6 +1306,23 @@ static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, return ret_val; } +/** + * e1000_power_down_phy_copper_80003es2lan - Remove link during PHY power down + * @hw: pointer to the HW structure + * + * In the case of a PHY power down to save power, or to turn off link during a + * driver unload, or wake on lan is not enabled, remove the link. + **/ +static void e1000_power_down_phy_copper_80003es2lan(struct e1000_hw *hw) +{ + /* If the management interface is not enabled, then power down */ + if (!(hw->mac.ops.check_mng_mode(hw) || + hw->phy.ops.check_reset_block(hw))) + e1000_power_down_phy_copper(hw); + + return; +} + /** * e1000_clear_hw_cntrs_80003es2lan - Clear device specific hardware counters * @hw: pointer to the HW structure diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index 6c3d55fc775..e0addf3eea8 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -774,6 +774,8 @@ struct e1000_phy_operations { s32 (*set_d3_lplu_state)(struct e1000_hw *, bool); s32 (*write_reg)(struct e1000_hw *, u32, u16); s32 (*write_reg_locked)(struct e1000_hw *, u32, u16); + void (*power_up)(struct e1000_hw *); + void (*power_down)(struct e1000_hw *); }; /* Function pointers for the NVM. */ diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 7530fc5d81c..9c389559892 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -217,6 +217,7 @@ static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw); static s32 e1000_led_on_pchlan(struct e1000_hw *hw); static s32 e1000_led_off_pchlan(struct e1000_hw *hw); static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active); +static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw); static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw); static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link); @@ -266,6 +267,8 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) phy->ops.set_d3_lplu_state = e1000_set_lplu_state_pchlan; phy->ops.write_reg = e1000_write_phy_reg_hv; phy->ops.write_reg_locked = e1000_write_phy_reg_hv_locked; + phy->ops.power_up = e1000_power_up_phy_copper; + phy->ops.power_down = e1000_power_down_phy_copper_ich8lan; phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; phy->id = e1000_phy_unknown; @@ -299,6 +302,9 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw) phy->addr = 1; phy->reset_delay_us = 100; + phy->ops.power_up = e1000_power_up_phy_copper; + phy->ops.power_down = e1000_power_down_phy_copper_ich8lan; + /* * We may need to do this twice - once for IGP and if that fails, * we'll set BM func pointers and try again @@ -3391,6 +3397,23 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw) return 0; } +/** + * e1000_power_down_phy_copper_ich8lan - Remove link during PHY power down + * @hw: pointer to the HW structure + * + * In the case of a PHY power down to save power, or to turn off link during a + * driver unload, or wake on lan is not enabled, remove the link. + **/ +static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw) +{ + /* If the management interface is not enabled, then power down */ + if (!(hw->mac.ops.check_mng_mode(hw) || + hw->phy.ops.check_reset_block(hw))) + e1000_power_down_phy_copper(hw); + + return; +} + /** * e1000_clear_hw_cntrs_ich8lan - Clear statistical counters * @hw: pointer to the HW structure diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 2381cb76f17..ab4db5266f1 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -2641,18 +2641,8 @@ static void e1000_configure(struct e1000_adapter *adapter) **/ void e1000e_power_up_phy(struct e1000_adapter *adapter) { - u16 mii_reg = 0; - - /* Just clear the power down bit to wake the phy back up */ - if (adapter->hw.phy.media_type == e1000_media_type_copper) { - /* - * According to the manual, the phy will retain its - * settings across a power-down/up cycle - */ - e1e_rphy(&adapter->hw, PHY_CONTROL, &mii_reg); - mii_reg &= ~MII_CR_POWER_DOWN; - e1e_wphy(&adapter->hw, PHY_CONTROL, mii_reg); - } + if (adapter->hw.phy.ops.power_up) + adapter->hw.phy.ops.power_up(&adapter->hw); adapter->hw.mac.ops.setup_link(&adapter->hw); } @@ -2660,35 +2650,17 @@ void e1000e_power_up_phy(struct e1000_adapter *adapter) /** * e1000_power_down_phy - Power down the PHY * - * Power down the PHY so no link is implied when interface is down - * The PHY cannot be powered down is management or WoL is active + * Power down the PHY so no link is implied when interface is down. + * The PHY cannot be powered down if management or WoL is active. */ static void e1000_power_down_phy(struct e1000_adapter *adapter) { - struct e1000_hw *hw = &adapter->hw; - u16 mii_reg; - /* WoL is enabled */ if (adapter->wol) return; - /* non-copper PHY? */ - if (adapter->hw.phy.media_type != e1000_media_type_copper) - return; - - /* reset is blocked because of a SoL/IDER session */ - if (e1000e_check_mng_mode(hw) || e1000_check_reset_block(hw)) - return; - - /* manageability (AMT) is enabled */ - if (er32(MANC) & E1000_MANC_SMBUS_EN) - return; - - /* power down the PHY */ - e1e_rphy(hw, PHY_CONTROL, &mii_reg); - mii_reg |= MII_CR_POWER_DOWN; - e1e_wphy(hw, PHY_CONTROL, mii_reg); - mdelay(1); + if (adapter->hw.phy.ops.power_down) + adapter->hw.phy.ops.power_down(&adapter->hw); } /** @@ -5294,17 +5266,17 @@ static void __devexit e1000_remove(struct pci_dev *pdev) cancel_work_sync(&adapter->print_hang_task); flush_scheduled_work(); + if (!(netdev->flags & IFF_UP)) + e1000_power_down_phy(adapter); + + unregister_netdev(netdev); + /* * Release control of h/w to f/w. If f/w is AMT enabled, this * would have already happened in close and is redundant. */ e1000_release_hw_control(adapter); - unregister_netdev(netdev); - - if (!e1000_check_reset_block(&adapter->hw)) - e1000_phy_hw_reset(&adapter->hw); - e1000e_reset_interrupt_capability(adapter); kfree(adapter->tx_ring); kfree(adapter->rx_ring); diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 9ce499734dc..140b23b320f 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -2533,6 +2533,43 @@ out: return ret_val; } +/** + * e1000_power_up_phy_copper - Restore copper link in case of PHY power down + * @hw: pointer to the HW structure + * + * In the case of a PHY power down to save power, or to turn off link during a + * driver unload, or wake on lan is not enabled, restore the link to previous + * settings. + **/ +void e1000_power_up_phy_copper(struct e1000_hw *hw) +{ + u16 mii_reg = 0; + + /* The PHY will retain its settings across a power down/up cycle */ + e1e_rphy(hw, PHY_CONTROL, &mii_reg); + mii_reg &= ~MII_CR_POWER_DOWN; + e1e_wphy(hw, PHY_CONTROL, mii_reg); +} + +/** + * e1000_power_down_phy_copper - Restore copper link in case of PHY power down + * @hw: pointer to the HW structure + * + * In the case of a PHY power down to save power, or to turn off link during a + * driver unload, or wake on lan is not enabled, restore the link to previous + * settings. + **/ +void e1000_power_down_phy_copper(struct e1000_hw *hw) +{ + u16 mii_reg = 0; + + /* The PHY will retain its settings across a power down/up cycle */ + e1e_rphy(hw, PHY_CONTROL, &mii_reg); + mii_reg |= MII_CR_POWER_DOWN; + e1e_wphy(hw, PHY_CONTROL, mii_reg); + msleep(1); +} + /** * e1000e_commit_phy - Soft PHY reset * @hw: pointer to the HW structure -- cgit v1.2.3-70-g09d2 From 5ff5b664351a94754031c1e5783f0cea6b3000ed Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Tue, 1 Dec 2009 15:51:11 +0000 Subject: e1000e: comment corrections Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/82571.c | 2 +- drivers/net/e1000e/ich8lan.c | 5 ++--- drivers/net/e1000e/lib.c | 5 +---- drivers/net/e1000e/phy.c | 14 +++++++------- 4 files changed, 11 insertions(+), 15 deletions(-) (limited to 'drivers/net/e1000e/phy.c') diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index 227f3d03ba2..f6f3a2289e0 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -1551,7 +1551,7 @@ bool e1000e_get_laa_state_82571(struct e1000_hw *hw) * @hw: pointer to the HW structure * @state: enable/disable locally administered address * - * Enable/Disable the current locally administers address state. + * Enable/Disable the current locally administered address state. **/ void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state) { diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index fbbc6ddfde8..1ce2bf97fa3 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -1747,7 +1747,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) if (hsfsts.hsf_status.flcinprog == 0) { /* * There is no cycle running at present, - * so we can start a cycle + * so we can start a cycle. * Begin by setting Flash Cycle Done. */ hsfsts.hsf_status.flcdone = 1; @@ -1755,7 +1755,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) ret_val = 0; } else { /* - * otherwise poll for sometime so the current + * Otherwise poll for sometime so the current * cycle has a chance to end before giving up. */ for (i = 0; i < ICH_FLASH_READ_COMMAND_TIMEOUT; i++) { @@ -2645,7 +2645,6 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) ctrl |= E1000_CTRL_PHY_RST; } ret_val = e1000_acquire_swflag_ich8lan(hw); - /* Whether or not the swflag was acquired, we need to reset the part */ e_dbg("Issuing a global reset to ich8lan\n"); ew32(CTRL, (ctrl | E1000_CTRL_RST)); msleep(20); diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index e3976ea668d..a86c17548c1 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -1086,7 +1086,6 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) * 1 | 1 | 0 | 0 | e1000_fc_none * 1 | 1 | 0 | 1 | e1000_fc_rx_pause * - * * Are both PAUSE bits set to 1? If so, this implies * Symmetric Flow Control is enabled at both ends. The * ASM_DIR bits are irrelevant per the spec. @@ -1124,7 +1123,6 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result *-------|---------|-------|---------|-------------------- * 0 | 1 | 1 | 1 | e1000_fc_tx_pause - * */ else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) && (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && @@ -1140,7 +1138,6 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result *-------|---------|-------|---------|-------------------- * 1 | 1 | 0 | 1 | e1000_fc_rx_pause - * */ else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && @@ -2363,7 +2360,7 @@ static s32 e1000_mng_write_cmd_header(struct e1000_hw *hw, } /** - * e1000_mng_host_if_write - Writes to the manageability host interface + * e1000_mng_host_if_write - Write to the manageability host interface * @hw: pointer to the HW structure * @buffer: pointer to the host interface buffer * @length: size of the buffer diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 140b23b320f..1bc09b240e6 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -153,10 +153,10 @@ s32 e1000e_get_phy_id(struct e1000_hw *hw) goto out; /* - * If the PHY ID is still unknown, we may have an 82577i - * without link. We will try again after setting Slow - * MDIC mode. No harm in trying again in this case since - * the PHY ID is unknown at this point anyway + * If the PHY ID is still unknown, we may have an 82577 + * without link. We will try again after setting Slow MDIC + * mode. No harm in trying again in this case since the PHY + * ID is unknown at this point anyway. */ ret_val = phy->ops.acquire(hw); if (ret_val) @@ -1744,7 +1744,7 @@ out: * The automatic gain control (agc) normalizes the amplitude of the * received signal, adjusting for the attenuation produced by the * cable. By reading the AGC registers, which represent the - * combination of course and fine gain value, the value can be put + * combination of coarse and fine gain value, the value can be put * into a lookup table to obtain the approximate cable length * for each channel. **/ @@ -1769,7 +1769,7 @@ s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw) /* * Getting bits 15:9, which represent the combination of - * course and fine gain values. The result is a number + * coarse and fine gain values. The result is a number * that can be put into the lookup table to obtain the * approximate cable length. */ @@ -2511,7 +2511,7 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE, data); } else { - /* Read the page 800 value using opcode 0x12 */ + /* Write the page 800 value using opcode 0x12 */ ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE, *data); } -- cgit v1.2.3-70-g09d2 From 9b71b419a60d200f553658a97c9f49a46f58e8bb Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Tue, 1 Dec 2009 15:53:07 +0000 Subject: e1000e: add debug messages Add some helpful debug messages. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ich8lan.c | 4 +++- drivers/net/e1000e/phy.c | 26 ++++++++++++++++++++------ 2 files changed, 23 insertions(+), 7 deletions(-) (limited to 'drivers/net/e1000e/phy.c') diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 1ce2bf97fa3..6efb77fbbd7 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -314,8 +314,10 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw) phy->ops.write_reg = e1000e_write_phy_reg_bm; phy->ops.read_reg = e1000e_read_phy_reg_bm; ret_val = e1000e_determine_phy_address(hw); - if (ret_val) + if (ret_val) { + e_dbg("Cannot determine PHY addr. Erroring out\n"); return ret_val; + } } phy->id = 0; diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 1bc09b240e6..3e5940afe36 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -2472,7 +2472,7 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, /* Gig must be disabled for MDIO accesses to page 800 */ if ((hw->mac.type == e1000_pchlan) && (!(er32(PHY_CTRL) & E1000_PHY_CTRL_GBE_DISABLE))) - e_dbg("Attempting to access page 800 while gig enabled\n"); + e_dbg("Attempting to access page 800 while gig enabled.\n"); /* All operations in this function are phy address 1 */ hw->phy.addr = 1; @@ -2482,20 +2482,26 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT)); ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, &phy_reg); - if (ret_val) + if (ret_val) { + e_dbg("Could not read PHY page 769\n"); goto out; + } /* First clear bit 4 to avoid a power state change */ phy_reg &= ~(BM_WUC_HOST_WU_BIT); ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg); - if (ret_val) + if (ret_val) { + e_dbg("Could not clear PHY page 769 bit 4\n"); goto out; + } /* Write bit 2 = 1, and clear bit 4 to 769_17 */ ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg | BM_WUC_ENABLE_BIT); - if (ret_val) + if (ret_val) { + e_dbg("Could not write PHY page 769 bit 2\n"); goto out; + } /* Select page 800 */ ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, @@ -2503,8 +2509,10 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, /* Write the page 800 offset value using opcode 0x11 */ ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ADDRESS_OPCODE, reg); - if (ret_val) + if (ret_val) { + e_dbg("Could not write address opcode to page 800\n"); goto out; + } if (read) { /* Read the page 800 value using opcode 0x12 */ @@ -2516,8 +2524,10 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, *data); } - if (ret_val) + if (ret_val) { + e_dbg("Could not access data value from page 800\n"); goto out; + } /* * Restore 769_17.2 to its original value @@ -2528,6 +2538,10 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, /* Clear 769_17.2 */ ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg); + if (ret_val) { + e_dbg("Could not clear PHY page 769 bit 2\n"); + goto out; + } out: return ret_val; -- cgit v1.2.3-70-g09d2 From 07f025e6bad7292af3904b8f49cd33e7b5fe3467 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Tue, 1 Dec 2009 15:53:48 +0000 Subject: e1000e: PHY type cleanups in e1000e_check_downshift() Remove the case for 82577 because it does not support the ability to check for downshift. Add case for e1000_phy_bm which can do this. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/e1000e/phy.c') diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 3e5940afe36..0c69649af06 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -1525,8 +1525,8 @@ s32 e1000e_check_downshift(struct e1000_hw *hw) switch (phy->type) { case e1000_phy_m88: case e1000_phy_gg82563: + case e1000_phy_bm: case e1000_phy_82578: - case e1000_phy_82577: offset = M88E1000_PHY_SPEC_STATUS; mask = M88E1000_PSSR_DOWNSHIFT; break; -- cgit v1.2.3-70-g09d2 From 5eb6f3c70fcc0fb19b9087863e6e29f96a76f3bd Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 2 Dec 2009 17:02:43 +0000 Subject: e1000e: refactor PHY ID detection workaround The workaround that detects the correct PHY ID when an initial read of the PHY ID registers returns an invalid one should retry up to ten times with a small delay between attempts using a single PHY address and then repeat using the remaining possible PHY addresses. Do this instead of trying each possible PHY address repeating that up to 100 times. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/hw.h | 2 +- drivers/net/e1000e/phy.c | 26 ++++++++++++++++---------- 2 files changed, 17 insertions(+), 11 deletions(-) (limited to 'drivers/net/e1000e/phy.c') diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index 41609d5561b..a7d08dae79c 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -219,7 +219,7 @@ enum e1e_registers { E1000_HICR = 0x08F00, /* Host Interface Control */ }; -/* RSS registers */ +#define E1000_MAX_PHY_ADDR 4 /* IGP01E1000 Specific Registers */ #define IGP01E1000_PHY_PORT_CONFIG 0x10 /* Port Config */ diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 0c69649af06..67a718862e7 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -2197,28 +2197,34 @@ enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id) s32 e1000e_determine_phy_address(struct e1000_hw *hw) { s32 ret_val = -E1000_ERR_PHY_TYPE; - u32 phy_addr= 0; - u32 i = 0; + u32 phy_addr = 0; + u32 i; enum e1000_phy_type phy_type = e1000_phy_unknown; - do { - for (phy_addr = 0; phy_addr < 4; phy_addr++) { - hw->phy.addr = phy_addr; + hw->phy.id = phy_type; + + for (phy_addr = 0; phy_addr < E1000_MAX_PHY_ADDR; phy_addr++) { + hw->phy.addr = phy_addr; + i = 0; + + do { e1000e_get_phy_id(hw); phy_type = e1000e_get_phy_type_from_id(hw->phy.id); - /* + /* * If phy_type is valid, break - we found our * PHY address */ if (phy_type != e1000_phy_unknown) { ret_val = 0; - break; + goto out; } - } - i++; - } while ((ret_val != 0) && (i < 100)); + msleep(1); + i++; + } while (i < 10); + } +out: return ret_val; } -- cgit v1.2.3-70-g09d2 From 0be8401051c716be4533272e983b7eed3d83946d Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 2 Dec 2009 17:03:18 +0000 Subject: e1000e: correct ICH/PCH PHY operations function pointers Some function pointers for a few PHY operations (for 82578 and 82567) and were set incorrectly causing functions to be executed that were accessing incorrect PHY register offsets for that particular device. This patch also moves a few PHY-specific functions from ich8lan.c to the more appropriate phy.c. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/e1000.h | 6 ++ drivers/net/e1000e/ich8lan.c | 216 +++++-------------------------------------- drivers/net/e1000e/phy.c | 191 +++++++++++++++++++++++++++++++++++--- 3 files changed, 204 insertions(+), 209 deletions(-) (limited to 'drivers/net/e1000e/phy.c') diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index b9f9e7836fa..cebbd9079d5 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -590,6 +590,12 @@ extern s32 e1000_get_phy_info_82577(struct e1000_hw *hw); extern s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw); extern s32 e1000_get_cable_length_82577(struct e1000_hw *hw); +extern s32 e1000_check_polarity_m88(struct e1000_hw *hw); +extern s32 e1000_get_phy_info_ife(struct e1000_hw *hw); +extern s32 e1000_check_polarity_ife(struct e1000_hw *hw); +extern s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw); +extern s32 e1000_check_polarity_igp(struct e1000_hw *hw); + static inline s32 e1000_phy_hw_reset(struct e1000_hw *hw) { return hw->phy.ops.reset(hw); diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 6efb77fbbd7..7b33be98a2c 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -195,7 +195,6 @@ union ich8_flash_protected_range { static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw); static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw); static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw); -static s32 e1000_check_polarity_ife_ich8lan(struct e1000_hw *hw); static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank); static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset, u8 byte); @@ -260,7 +259,6 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) phy->addr = 1; phy->reset_delay_us = 100; - phy->ops.check_polarity = e1000_check_polarity_ife_ich8lan; phy->ops.read_reg = e1000_read_phy_reg_hv; phy->ops.read_reg_locked = e1000_read_phy_reg_hv_locked; phy->ops.set_d0_lplu_state = e1000_set_lplu_state_pchlan; @@ -275,13 +273,23 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) e1000e_get_phy_id(hw); phy->type = e1000e_get_phy_type_from_id(phy->id); - if (phy->type == e1000_phy_82577) { + switch (phy->type) { + case e1000_phy_82577: phy->ops.check_polarity = e1000_check_polarity_82577; phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_82577; - phy->ops.get_cable_length = e1000_get_cable_length_82577; + phy->ops.get_cable_length = e1000_get_cable_length_82577; phy->ops.get_info = e1000_get_phy_info_82577; phy->ops.commit = e1000e_phy_sw_reset; + case e1000_phy_82578: + phy->ops.check_polarity = e1000_check_polarity_m88; + phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_m88; + phy->ops.get_cable_length = e1000e_get_cable_length_m88; + phy->ops.get_info = e1000e_get_phy_info_m88; + break; + default: + ret_val = -E1000_ERR_PHY; + break; } return ret_val; @@ -336,12 +344,18 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw) phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; phy->ops.read_reg_locked = e1000e_read_phy_reg_igp_locked; phy->ops.write_reg_locked = e1000e_write_phy_reg_igp_locked; + phy->ops.get_info = e1000e_get_phy_info_igp; + phy->ops.check_polarity = e1000_check_polarity_igp; + phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_igp; break; case IFE_E_PHY_ID: case IFE_PLUS_E_PHY_ID: case IFE_C_E_PHY_ID: phy->type = e1000_phy_ife; phy->autoneg_mask = E1000_ALL_NOT_GIG; + phy->ops.get_info = e1000_get_phy_info_ife; + phy->ops.check_polarity = e1000_check_polarity_ife; + phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_ife; break; case BME1000_E_PHY_ID: phy->type = e1000_phy_bm; @@ -349,14 +363,15 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw) phy->ops.read_reg = e1000e_read_phy_reg_bm; phy->ops.write_reg = e1000e_write_phy_reg_bm; phy->ops.commit = e1000e_phy_sw_reset; + phy->ops.get_info = e1000e_get_phy_info_m88; + phy->ops.check_polarity = e1000_check_polarity_m88; + phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_m88; break; default: return -E1000_ERR_PHY; break; } - phy->ops.check_polarity = e1000_check_polarity_ife_ich8lan; - return 0; } @@ -739,77 +754,6 @@ static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw) return (fwsm & E1000_ICH_FWSM_RSPCIPHY) ? 0 : E1000_BLK_PHY_RESET; } -/** - * e1000_phy_force_speed_duplex_ich8lan - Force PHY speed & duplex - * @hw: pointer to the HW structure - * - * Forces the speed and duplex settings of the PHY. - * This is a function pointer entry point only called by - * PHY setup routines. - **/ -static s32 e1000_phy_force_speed_duplex_ich8lan(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 data; - bool link; - - if (phy->type != e1000_phy_ife) { - ret_val = e1000e_phy_force_speed_duplex_igp(hw); - return ret_val; - } - - ret_val = e1e_rphy(hw, PHY_CONTROL, &data); - if (ret_val) - return ret_val; - - e1000e_phy_force_speed_duplex_setup(hw, &data); - - ret_val = e1e_wphy(hw, PHY_CONTROL, data); - if (ret_val) - return ret_val; - - /* Disable MDI-X support for 10/100 */ - ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data); - if (ret_val) - return ret_val; - - data &= ~IFE_PMC_AUTO_MDIX; - data &= ~IFE_PMC_FORCE_MDIX; - - ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, data); - if (ret_val) - return ret_val; - - e_dbg("IFE PMC: %X\n", data); - - udelay(1); - - if (phy->autoneg_wait_to_complete) { - e_dbg("Waiting for forced speed/duplex link on IFE phy.\n"); - - ret_val = e1000e_phy_has_link_generic(hw, - PHY_FORCE_LIMIT, - 100000, - &link); - if (ret_val) - return ret_val; - - if (!link) - e_dbg("Link taking longer than expected.\n"); - - /* Try once more */ - ret_val = e1000e_phy_has_link_generic(hw, - PHY_FORCE_LIMIT, - 100000, - &link); - if (ret_val) - return ret_val; - } - - return 0; -} - /** * e1000_sw_lcd_config_ich8lan - SW-based LCD Configuration * @hw: pointer to the HW structure @@ -1261,122 +1205,6 @@ out: return 0; } -/** - * e1000_get_phy_info_ife_ich8lan - Retrieves various IFE PHY states - * @hw: pointer to the HW structure - * - * Populates "phy" structure with various feature states. - * This function is only called by other family-specific - * routines. - **/ -static s32 e1000_get_phy_info_ife_ich8lan(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 data; - bool link; - - ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link); - if (ret_val) - return ret_val; - - if (!link) { - e_dbg("Phy info is only valid if link is up\n"); - return -E1000_ERR_CONFIG; - } - - ret_val = e1e_rphy(hw, IFE_PHY_SPECIAL_CONTROL, &data); - if (ret_val) - return ret_val; - phy->polarity_correction = (!(data & IFE_PSC_AUTO_POLARITY_DISABLE)); - - if (phy->polarity_correction) { - ret_val = phy->ops.check_polarity(hw); - if (ret_val) - return ret_val; - } else { - /* Polarity is forced */ - phy->cable_polarity = (data & IFE_PSC_FORCE_POLARITY) - ? e1000_rev_polarity_reversed - : e1000_rev_polarity_normal; - } - - ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data); - if (ret_val) - return ret_val; - - phy->is_mdix = (data & IFE_PMC_MDIX_STATUS); - - /* The following parameters are undefined for 10/100 operation. */ - phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; - phy->local_rx = e1000_1000t_rx_status_undefined; - phy->remote_rx = e1000_1000t_rx_status_undefined; - - return 0; -} - -/** - * e1000_get_phy_info_ich8lan - Calls appropriate PHY type get_phy_info - * @hw: pointer to the HW structure - * - * Wrapper for calling the get_phy_info routines for the appropriate phy type. - * This is a function pointer entry point called by drivers - * or other shared routines. - **/ -static s32 e1000_get_phy_info_ich8lan(struct e1000_hw *hw) -{ - switch (hw->phy.type) { - case e1000_phy_ife: - return e1000_get_phy_info_ife_ich8lan(hw); - break; - case e1000_phy_igp_3: - case e1000_phy_bm: - case e1000_phy_82578: - case e1000_phy_82577: - return e1000e_get_phy_info_igp(hw); - break; - default: - break; - } - - return -E1000_ERR_PHY_TYPE; -} - -/** - * e1000_check_polarity_ife_ich8lan - Check cable polarity for IFE PHY - * @hw: pointer to the HW structure - * - * Polarity is determined on the polarity reversal feature being enabled. - * This function is only called by other family-specific - * routines. - **/ -static s32 e1000_check_polarity_ife_ich8lan(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 phy_data, offset, mask; - - /* - * Polarity is determined based on the reversal feature being enabled. - */ - if (phy->polarity_correction) { - offset = IFE_PHY_EXTENDED_STATUS_CONTROL; - mask = IFE_PESC_POLARITY_REVERSED; - } else { - offset = IFE_PHY_SPECIAL_CONTROL; - mask = IFE_PSC_FORCE_POLARITY; - } - - ret_val = e1e_rphy(hw, offset, &phy_data); - - if (!ret_val) - phy->cable_polarity = (phy_data & mask) - ? e1000_rev_polarity_reversed - : e1000_rev_polarity_normal; - - return ret_val; -} - /** * e1000_set_lplu_state_pchlan - Set Low Power Link Up state * @hw: pointer to the HW structure @@ -3485,10 +3313,8 @@ static struct e1000_phy_operations ich8_phy_ops = { .acquire = e1000_acquire_swflag_ich8lan, .check_reset_block = e1000_check_reset_block_ich8lan, .commit = NULL, - .force_speed_duplex = e1000_phy_force_speed_duplex_ich8lan, .get_cfg_done = e1000_get_cfg_done_ich8lan, .get_cable_length = e1000e_get_cable_length_igp_2, - .get_info = e1000_get_phy_info_ich8lan, .read_reg = e1000e_read_phy_reg_igp, .release = e1000_release_swflag_ich8lan, .reset = e1000_phy_hw_reset_ich8lan, diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 67a718862e7..55a2c0acfee 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -1322,17 +1322,22 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw) return ret_val; if (!link) { - /* - * We didn't get link. - * Reset the DSP and cross our fingers. - */ - ret_val = e1e_wphy(hw, M88E1000_PHY_PAGE_SELECT, - 0x001d); - if (ret_val) - return ret_val; - ret_val = e1000e_phy_reset_dsp(hw); - if (ret_val) - return ret_val; + if (hw->phy.type != e1000_phy_m88) { + e_dbg("Link taking longer than expected.\n"); + } else { + /* + * We didn't get link. + * Reset the DSP and cross our fingers. + */ + ret_val = e1e_wphy(hw, + M88E1000_PHY_PAGE_SELECT, + 0x001d); + if (ret_val) + return ret_val; + ret_val = e1000e_phy_reset_dsp(hw); + if (ret_val) + return ret_val; + } } /* Try once more */ @@ -1342,6 +1347,9 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw) return ret_val; } + if (hw->phy.type != e1000_phy_m88) + return 0; + ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data); if (ret_val) return ret_val; @@ -1370,6 +1378,73 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw) return ret_val; } +/** + * e1000_phy_force_speed_duplex_ife - Force PHY speed & duplex + * @hw: pointer to the HW structure + * + * Forces the speed and duplex settings of the PHY. + * This is a function pointer entry point only called by + * PHY setup routines. + **/ +s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + bool link; + + ret_val = e1e_rphy(hw, PHY_CONTROL, &data); + if (ret_val) + goto out; + + e1000e_phy_force_speed_duplex_setup(hw, &data); + + ret_val = e1e_wphy(hw, PHY_CONTROL, data); + if (ret_val) + goto out; + + /* Disable MDI-X support for 10/100 */ + ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data); + if (ret_val) + goto out; + + data &= ~IFE_PMC_AUTO_MDIX; + data &= ~IFE_PMC_FORCE_MDIX; + + ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, data); + if (ret_val) + goto out; + + e_dbg("IFE PMC: %X\n", data); + + udelay(1); + + if (phy->autoneg_wait_to_complete) { + e_dbg("Waiting for forced speed/duplex link on IFE phy.\n"); + + ret_val = e1000e_phy_has_link_generic(hw, + PHY_FORCE_LIMIT, + 100000, + &link); + if (ret_val) + goto out; + + if (!link) + e_dbg("Link taking longer than expected.\n"); + + /* Try once more */ + ret_val = e1000e_phy_has_link_generic(hw, + PHY_FORCE_LIMIT, + 100000, + &link); + if (ret_val) + goto out; + } + +out: + return ret_val; +} + /** * e1000e_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex * @hw: pointer to the HW structure @@ -1557,7 +1632,7 @@ s32 e1000e_check_downshift(struct e1000_hw *hw) * * Polarity is determined based on the PHY specific status register. **/ -static s32 e1000_check_polarity_m88(struct e1000_hw *hw) +s32 e1000_check_polarity_m88(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; s32 ret_val; @@ -1582,7 +1657,7 @@ static s32 e1000_check_polarity_m88(struct e1000_hw *hw) * Polarity is determined based on the PHY port status register, and the * current speed (since there is no polarity at 100Mbps). **/ -static s32 e1000_check_polarity_igp(struct e1000_hw *hw) +s32 e1000_check_polarity_igp(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; s32 ret_val; @@ -1619,6 +1694,39 @@ static s32 e1000_check_polarity_igp(struct e1000_hw *hw) return ret_val; } +/** + * e1000_check_polarity_ife - Check cable polarity for IFE PHY + * @hw: pointer to the HW structure + * + * Polarity is determined on the polarity reversal feature being enabled. + **/ +s32 e1000_check_polarity_ife(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data, offset, mask; + + /* + * Polarity is determined based on the reversal feature being enabled. + */ + if (phy->polarity_correction) { + offset = IFE_PHY_EXTENDED_STATUS_CONTROL; + mask = IFE_PESC_POLARITY_REVERSED; + } else { + offset = IFE_PHY_SPECIAL_CONTROL; + mask = IFE_PSC_FORCE_POLARITY; + } + + ret_val = e1e_rphy(hw, offset, &phy_data); + + if (!ret_val) + phy->cable_polarity = (phy_data & mask) + ? e1000_rev_polarity_reversed + : e1000_rev_polarity_normal; + + return ret_val; +} + /** * e1000_wait_autoneg - Wait for auto-neg completion * @hw: pointer to the HW structure @@ -1823,7 +1931,7 @@ s32 e1000e_get_phy_info_m88(struct e1000_hw *hw) u16 phy_data; bool link; - if (hw->phy.media_type != e1000_media_type_copper) { + if (phy->media_type != e1000_media_type_copper) { e_dbg("Phy info is only valid for copper media\n"); return -E1000_ERR_CONFIG; } @@ -1943,6 +2051,61 @@ s32 e1000e_get_phy_info_igp(struct e1000_hw *hw) return ret_val; } +/** + * e1000_get_phy_info_ife - Retrieves various IFE PHY states + * @hw: pointer to the HW structure + * + * Populates "phy" structure with various feature states. + **/ +s32 e1000_get_phy_info_ife(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + bool link; + + ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link); + if (ret_val) + goto out; + + if (!link) { + e_dbg("Phy info is only valid if link is up\n"); + ret_val = -E1000_ERR_CONFIG; + goto out; + } + + ret_val = e1e_rphy(hw, IFE_PHY_SPECIAL_CONTROL, &data); + if (ret_val) + goto out; + phy->polarity_correction = (data & IFE_PSC_AUTO_POLARITY_DISABLE) + ? false : true; + + if (phy->polarity_correction) { + ret_val = e1000_check_polarity_ife(hw); + if (ret_val) + goto out; + } else { + /* Polarity is forced */ + phy->cable_polarity = (data & IFE_PSC_FORCE_POLARITY) + ? e1000_rev_polarity_reversed + : e1000_rev_polarity_normal; + } + + ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data); + if (ret_val) + goto out; + + phy->is_mdix = (data & IFE_PMC_MDIX_STATUS) ? true : false; + + /* The following parameters are undefined for 10/100 operation. */ + phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; + phy->local_rx = e1000_1000t_rx_status_undefined; + phy->remote_rx = e1000_1000t_rx_status_undefined; + +out: + return ret_val; +} + /** * e1000e_phy_sw_reset - PHY software reset * @hw: pointer to the HW structure -- cgit v1.2.3-70-g09d2