From 75eb0fad56da8494b43865097f362633debdc958 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Fri, 21 Nov 2008 16:53:51 -0800 Subject: e1000e: ESB2 config after link up On ESB2, the MAC-to-PHY (Kumeran) interface must be configured after link is up before any traffic is sent; a new PHY operations function pointer is provided for this. To facilitate read/write of the Kumeran registers without blocking PHY register writes, the driver/firmware synchronization method which previously used a hardware semaphore for both PHY and Kumeran register accesses is now split. New Kumeran register read/write functions utilize this new synchronization method. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/82571.c | 3 + drivers/net/e1000e/es2lan.c | 192 +++++++++++++++++++++++++++++++++++--------- drivers/net/e1000e/hw.h | 1 + drivers/net/e1000e/netdev.c | 8 ++ 4 files changed, 167 insertions(+), 37 deletions(-) (limited to 'drivers/net/e1000e') diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index cbb1707cc0d..11e72b64e87 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -1394,6 +1394,7 @@ static struct e1000_phy_operations e82_phy_ops_igp = { .set_d0_lplu_state = e1000_set_d0_lplu_state_82571, .set_d3_lplu_state = e1000e_set_d3_lplu_state, .write_phy_reg = e1000e_write_phy_reg_igp, + .cfg_on_link_up = NULL, }; static struct e1000_phy_operations e82_phy_ops_m88 = { @@ -1410,6 +1411,7 @@ static struct e1000_phy_operations e82_phy_ops_m88 = { .set_d0_lplu_state = e1000_set_d0_lplu_state_82571, .set_d3_lplu_state = e1000e_set_d3_lplu_state, .write_phy_reg = e1000e_write_phy_reg_m88, + .cfg_on_link_up = NULL, }; static struct e1000_phy_operations e82_phy_ops_bm = { @@ -1426,6 +1428,7 @@ static struct e1000_phy_operations e82_phy_ops_bm = { .set_d0_lplu_state = e1000_set_d0_lplu_state_82571, .set_d3_lplu_state = e1000e_set_d3_lplu_state, .write_phy_reg = e1000e_write_phy_reg_bm2, + .cfg_on_link_up = NULL, }; static struct e1000_nvm_operations e82571_nvm_ops = { diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c index da9c09c248e..db51114ebfd 100644 --- a/drivers/net/e1000e/es2lan.c +++ b/drivers/net/e1000e/es2lan.c @@ -112,6 +112,11 @@ static void e1000_initialize_hw_bits_80003es2lan(struct e1000_hw *hw); static void e1000_clear_hw_cntrs_80003es2lan(struct e1000_hw *hw); static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw); static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex); +static s32 e1000_cfg_on_link_up_80003es2lan(struct e1000_hw *hw); +static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, + u16 *data); +static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, + u16 data); /** * e1000_init_phy_params_80003es2lan - Init ESB2 PHY func ptrs. @@ -275,8 +280,6 @@ static s32 e1000_acquire_phy_80003es2lan(struct e1000_hw *hw) u16 mask; mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM; - mask |= E1000_SWFW_CSR_SM; - return e1000_acquire_swfw_sync_80003es2lan(hw, mask); } @@ -292,7 +295,36 @@ static void e1000_release_phy_80003es2lan(struct e1000_hw *hw) u16 mask; mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM; - mask |= E1000_SWFW_CSR_SM; + e1000_release_swfw_sync_80003es2lan(hw, mask); +} + +/** + * e1000_acquire_mac_csr_80003es2lan - Acquire rights to access Kumeran register + * @hw: pointer to the HW structure + * + * Acquire the semaphore to access the Kumeran interface. + * + **/ +static s32 e1000_acquire_mac_csr_80003es2lan(struct e1000_hw *hw) +{ + u16 mask; + + mask = E1000_SWFW_CSR_SM; + + return e1000_acquire_swfw_sync_80003es2lan(hw, mask); +} + +/** + * e1000_release_mac_csr_80003es2lan - Release rights to access Kumeran Register + * @hw: pointer to the HW structure + * + * Release the semaphore used to access the Kumeran interface + **/ +static void e1000_release_mac_csr_80003es2lan(struct e1000_hw *hw) +{ + u16 mask; + + mask = E1000_SWFW_CSR_SM; e1000_release_swfw_sync_80003es2lan(hw, mask); } @@ -347,7 +379,7 @@ static s32 e1000_acquire_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask) u32 swmask = mask; u32 fwmask = mask << 16; s32 i = 0; - s32 timeout = 200; + s32 timeout = 50; while (i < timeout) { if (e1000e_get_hw_semaphore(hw)) @@ -715,13 +747,7 @@ static s32 e1000_get_link_up_info_80003es2lan(struct e1000_hw *hw, u16 *speed, ret_val = e1000e_get_speed_and_duplex_copper(hw, speed, duplex); - if (ret_val) - return ret_val; - if (*speed == SPEED_1000) - ret_val = e1000_cfg_kmrn_1000_80003es2lan(hw); - else - ret_val = e1000_cfg_kmrn_10_100_80003es2lan(hw, - *duplex); + hw->phy.ops.cfg_on_link_up(hw); } else { ret_val = e1000e_get_speed_and_duplex_fiber_serdes(hw, speed, @@ -763,8 +789,10 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw) ctrl = er32(CTRL); + ret_val = e1000_acquire_phy_80003es2lan(hw); hw_dbg(hw, "Issuing a global reset to MAC\n"); ew32(CTRL, ctrl | E1000_CTRL_RST); + e1000_release_phy_80003es2lan(hw); ret_val = e1000e_get_auto_rd_done(hw); if (ret_val) @@ -907,8 +935,7 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw) struct e1000_phy_info *phy = &hw->phy; s32 ret_val; u32 ctrl_ext; - u32 i = 0; - u16 data, data2; + u16 data; ret_val = e1e_rphy(hw, GG82563_PHY_MAC_SPEC_CTRL, &data); if (ret_val) @@ -972,19 +999,20 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw) } /* Bypass Rx and Tx FIFO's */ - ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL, + ret_val = e1000_write_kmrn_reg_80003es2lan(hw, + E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL, E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS | E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS); if (ret_val) return ret_val; - ret_val = e1000e_read_kmrn_reg(hw, + ret_val = e1000_read_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE, &data); if (ret_val) return ret_val; data |= E1000_KMRNCTRLSTA_OPMODE_E_IDLE; - ret_val = e1000e_write_kmrn_reg(hw, + ret_val = e1000_write_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE, data); if (ret_val) @@ -1019,18 +1047,9 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw) if (ret_val) return ret_val; - do { - ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, - &data); - if (ret_val) - return ret_val; - - ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, - &data2); - if (ret_val) - return ret_val; - i++; - } while ((data != data2) && (i < GG82563_MAX_KMRN_RETRY)); + ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, &data); + if (ret_val) + return ret_val; data &= ~GG82563_KMCR_PASS_FALSE_CARRIER; ret_val = e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, data); @@ -1077,23 +1096,27 @@ static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw) * iteration and increase the max iterations when * polling the phy; this fixes erroneous timeouts at 10Mbps. */ - ret_val = e1000e_write_kmrn_reg(hw, GG82563_REG(0x34, 4), 0xFFFF); + ret_val = e1000_write_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 4), + 0xFFFF); if (ret_val) return ret_val; - ret_val = e1000e_read_kmrn_reg(hw, GG82563_REG(0x34, 9), ®_data); + ret_val = e1000_read_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 9), + ®_data); if (ret_val) return ret_val; reg_data |= 0x3F; - ret_val = e1000e_write_kmrn_reg(hw, GG82563_REG(0x34, 9), reg_data); + ret_val = e1000_write_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 9), + reg_data); if (ret_val) return ret_val; - ret_val = e1000e_read_kmrn_reg(hw, + ret_val = e1000_read_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_OFFSET_INB_CTRL, ®_data); if (ret_val) return ret_val; reg_data |= E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING; - ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_OFFSET_INB_CTRL, + ret_val = e1000_write_kmrn_reg_80003es2lan(hw, + E1000_KMRNCTRLSTA_OFFSET_INB_CTRL, reg_data); if (ret_val) return ret_val; @@ -1107,6 +1130,35 @@ static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw) return 0; } +/** + * e1000_cfg_on_link_up_80003es2lan - es2 link configuration after link-up + * @hw: pointer to the HW structure + * @duplex: current duplex setting + * + * Configure the KMRN interface by applying last minute quirks for + * 10/100 operation. + **/ +static s32 e1000_cfg_on_link_up_80003es2lan(struct e1000_hw *hw) +{ + s32 ret_val = 0; + u16 speed; + u16 duplex; + + if (hw->phy.media_type == e1000_media_type_copper) { + ret_val = e1000e_get_speed_and_duplex_copper(hw, &speed, + &duplex); + if (ret_val) + return ret_val; + + if (speed == SPEED_1000) + ret_val = e1000_cfg_kmrn_1000_80003es2lan(hw); + else + ret_val = e1000_cfg_kmrn_10_100_80003es2lan(hw, duplex); + } + + return ret_val; +} + /** * e1000_cfg_kmrn_10_100_80003es2lan - Apply "quirks" for 10/100 operation * @hw: pointer to the HW structure @@ -1123,8 +1175,9 @@ static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex) u16 reg_data, reg_data2; reg_data = E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT; - ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_OFFSET_HD_CTRL, - reg_data); + ret_val = e1000_write_kmrn_reg_80003es2lan(hw, + E1000_KMRNCTRLSTA_OFFSET_HD_CTRL, + reg_data); if (ret_val) return ret_val; @@ -1170,8 +1223,9 @@ static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw) u32 i = 0; reg_data = E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT; - ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_OFFSET_HD_CTRL, - reg_data); + ret_val = e1000_write_kmrn_reg_80003es2lan(hw, + E1000_KMRNCTRLSTA_OFFSET_HD_CTRL, + reg_data); if (ret_val) return ret_val; @@ -1198,6 +1252,69 @@ static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw) return ret_val; } +/** + * e1000_read_kmrn_reg_80003es2lan - Read kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Acquire semaphore, then read the PHY register at offset + * using the kumeran interface. The information retrieved is stored in data. + * Release the semaphore before exiting. + **/ +s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, u16 *data) +{ + u32 kmrnctrlsta; + s32 ret_val = 0; + + ret_val = e1000_acquire_mac_csr_80003es2lan(hw); + if (ret_val) + return ret_val; + + kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & + E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN; + ew32(KMRNCTRLSTA, kmrnctrlsta); + + udelay(2); + + kmrnctrlsta = er32(KMRNCTRLSTA); + *data = (u16)kmrnctrlsta; + + e1000_release_mac_csr_80003es2lan(hw); + + return ret_val; +} + +/** + * e1000_write_kmrn_reg_80003es2lan - Write kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Acquire semaphore, then write the data to PHY register + * at the offset using the kumeran interface. Release semaphore + * before exiting. + **/ +s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, u16 data) +{ + u32 kmrnctrlsta; + s32 ret_val = 0; + + ret_val = e1000_acquire_mac_csr_80003es2lan(hw); + if (ret_val) + return ret_val; + + kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & + E1000_KMRNCTRLSTA_OFFSET) | data; + ew32(KMRNCTRLSTA, kmrnctrlsta); + + udelay(2); + + e1000_release_mac_csr_80003es2lan(hw); + + return ret_val; +} + /** * e1000_clear_hw_cntrs_80003es2lan - Clear device specific hardware counters * @hw: pointer to the HW structure @@ -1276,6 +1393,7 @@ static struct e1000_phy_operations es2_phy_ops = { .set_d0_lplu_state = NULL, .set_d3_lplu_state = e1000e_set_d3_lplu_state, .write_phy_reg = e1000_write_phy_reg_gg82563_80003es2lan, + .cfg_on_link_up = e1000_cfg_on_link_up_80003es2lan, }; static struct e1000_nvm_operations es2_nvm_ops = { diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index c4ffd4b7051..ac1efb9ac58 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -739,6 +739,7 @@ struct e1000_phy_operations { s32 (*set_d0_lplu_state)(struct e1000_hw *, bool); s32 (*set_d3_lplu_state)(struct e1000_hw *, bool); s32 (*write_phy_reg)(struct e1000_hw *, u32, u16); + s32 (*cfg_on_link_up)(struct e1000_hw *); }; /* Function pointers for the NVM. */ diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index ae6dce584d8..7eb1a3603db 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -3493,6 +3493,7 @@ static void e1000_watchdog_task(struct work_struct *work) struct e1000_adapter, watchdog_task); struct net_device *netdev = adapter->netdev; struct e1000_mac_info *mac = &adapter->hw.mac; + struct e1000_phy_info *phy = &adapter->hw.phy; struct e1000_ring *tx_ring = adapter->tx_ring; struct e1000_hw *hw = &adapter->hw; u32 link, tctl; @@ -3599,6 +3600,13 @@ static void e1000_watchdog_task(struct work_struct *work) tctl |= E1000_TCTL_EN; ew32(TCTL, tctl); + /* + * Perform any post-link-up configuration before + * reporting link up. + */ + if (phy->ops.cfg_on_link_up) + phy->ops.cfg_on_link_up(hw); + netif_carrier_on(netdev); netif_tx_wake_all_queues(netdev); -- cgit v1.2.3-70-g09d2