From d4360d6fb61af7aa8e027bf5983598d5437737cc Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Fri, 22 Nov 2013 12:51:09 -0600 Subject: be2net: Disabling and enabling interrupts in suspend and resume Interrupts need to be enabled in be_resume, when adapter boots back up from D3cold. disabling interrupts in be_suspend() just to be symmetric to be_resume(). Signed-off-by: Ravikumar Nelavelli Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net/ethernet/emulex') diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index abde9747163..9b148cf0470 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -4599,6 +4599,7 @@ static int be_suspend(struct pci_dev *pdev, pm_message_t state) if (adapter->wol) be_setup_wol(adapter, true); + be_intr_set(adapter, false); cancel_delayed_work_sync(&adapter->func_recovery_work); netif_device_detach(netdev); @@ -4634,6 +4635,7 @@ static int be_resume(struct pci_dev *pdev) if (status) return status; + be_intr_set(adapter, true); /* tell fw we're ready to fire cmds */ status = be_cmd_fw_init(adapter); if (status) -- cgit v1.2.3-70-g09d2 From 09e83a9d449c1af533321f5bda62b6a59a4098c6 Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Fri, 22 Nov 2013 12:51:20 -0600 Subject: be2net: set coalesce-wm in CQ_CREATE_V2 cmd It is not being set currently. (This field is not applicable for Lancer) Signed-off-by: Vasundhara Volam Signed-off-by: Sathya Perla Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_cmds.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers/net/ethernet/emulex') diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index dbcd5262c01..e0e8bc1ef14 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -1032,6 +1032,13 @@ int be_cmd_cq_create(struct be_adapter *adapter, struct be_queue_info *cq, } else { req->hdr.version = 2; req->page_size = 1; /* 1 for 4K */ + + /* coalesce-wm field in this cmd is not relevant to Lancer. + * Lancer uses COMMON_MODIFY_CQ to set this field + */ + if (!lancer_chip(adapter)) + AMAP_SET_BITS(struct amap_cq_context_v2, coalescwm, + ctxt, coalesce_wm); AMAP_SET_BITS(struct amap_cq_context_v2, nodelay, ctxt, no_delay); AMAP_SET_BITS(struct amap_cq_context_v2, count, ctxt, -- cgit v1.2.3-70-g09d2 From 2c7a9dc1641664173211c4ebc5db510a08684c46 Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Fri, 22 Nov 2013 12:51:28 -0600 Subject: be2net: Avoid programming permenant MAC by BE3-R VFs On BE3-R, the PF programs the initial MAC address for its VFs. Doing it again in VF probe, causes a FW error which although harmless generates an unnecessary error log message. Signed-off-by: Vasundhara Volam Signed-off-by: Sathya Perla Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be.h | 1 + drivers/net/ethernet/emulex/benet/be_main.c | 10 ++++------ 2 files changed, 5 insertions(+), 6 deletions(-) (limited to 'drivers/net/ethernet/emulex') diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h index f4825db5d17..5878df619b5 100644 --- a/drivers/net/ethernet/emulex/benet/be.h +++ b/drivers/net/ethernet/emulex/benet/be.h @@ -503,6 +503,7 @@ struct be_adapter { }; #define be_physfn(adapter) (!adapter->virtfn) +#define be_virtfn(adapter) (adapter->virtfn) #define sriov_enabled(adapter) (adapter->num_vfs > 0) #define sriov_want(adapter) (be_physfn(adapter) && \ (num_vfs || pci_num_vf(adapter->pdev))) diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 9b148cf0470..78a0e859760 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -3253,12 +3253,10 @@ static int be_mac_setup(struct be_adapter *adapter) memcpy(mac, adapter->netdev->dev_addr, ETH_ALEN); } - /* On BE3 VFs this cmd may fail due to lack of privilege. - * Ignore the failure as in this case pmac_id is fetched - * in the IFACE_CREATE cmd. - */ - be_cmd_pmac_add(adapter, mac, adapter->if_handle, - &adapter->pmac_id[0], 0); + /* For BE3-R VFs, the PF programs the initial MAC address */ + if (!(BEx_chip(adapter) && be_virtfn(adapter))) + be_cmd_pmac_add(adapter, mac, adapter->if_handle, + &adapter->pmac_id[0], 0); return 0; } -- cgit v1.2.3-70-g09d2 From 55485e7b417b640870b14eceec4cfbcb2b3e7a92 Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Tue, 26 Nov 2013 17:54:41 +0100 Subject: be2net: call napi_disable() for all event queues The recent be2net commit 6384a4d (adds a support for busy polling) introduces a regression that results in kernel crash. It incorrectly modified be_close() so napi_disable() is called only for the first queue. This breaks a correct pairing of napi_enable/_disable for the rest of event queues and causes a crash in subsequent be_open() call. Cc: Sathya Perla Cc: Subbu Seetharaman Cc: Ajit Khaparde Signed-off-by: Ivan Vecera Acked-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet/emulex') diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 78a0e859760..0aec4d23eb5 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -2663,8 +2663,8 @@ static int be_close(struct net_device *netdev) napi_disable(&eqo->napi); be_disable_busy_poll(eqo); } - adapter->flags &= ~BE_FLAGS_NAPI_ENABLED; } + adapter->flags &= ~BE_FLAGS_NAPI_ENABLED; be_async_mcc_disable(adapter); -- cgit v1.2.3-70-g09d2 From 71237b6feb8361a00a1cb481a0c901fbee8f82a5 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 28 Nov 2013 18:53:36 -0500 Subject: Revert "be2net: call napi_disable() for all event queues" This reverts commit 55485e7b417b640870b14eceec4cfbcb2b3e7a92. I applied the wrong version of this patch, the right one is coming up next. Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet/emulex') diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 0aec4d23eb5..78a0e859760 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -2663,8 +2663,8 @@ static int be_close(struct net_device *netdev) napi_disable(&eqo->napi); be_disable_busy_poll(eqo); } + adapter->flags &= ~BE_FLAGS_NAPI_ENABLED; } - adapter->flags &= ~BE_FLAGS_NAPI_ENABLED; be_async_mcc_disable(adapter); -- cgit v1.2.3-70-g09d2 From dff345c5c85df3c5853491b007f6b1b578dc28a4 Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Wed, 27 Nov 2013 08:59:32 +0100 Subject: be2net: call napi_disable() for all event queues The recent be2net commit 6384a4d (adds a support for busy polling) introduces a regression that results in kernel crash. It incorrectly modified be_close() so napi_disable() is called only for the first queue. This breaks a correct pairing of napi_enable/_disable for the rest of event queues and causes a crash in subsequent be_open() call. v2: Applied suggestions from Sathya Fixes: 6384a4d ("be2net: add support for ndo_busy_poll") Cc: Sathya Perla Cc: Subbu Seetharaman Cc: Ajit Khaparde Signed-off-by: Ivan Vecera Acked-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet/emulex') diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 78a0e859760..fee64bf1044 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -2658,8 +2658,8 @@ static int be_close(struct net_device *netdev) be_roce_dev_close(adapter); - for_all_evt_queues(adapter, eqo, i) { - if (adapter->flags & BE_FLAGS_NAPI_ENABLED) { + if (adapter->flags & BE_FLAGS_NAPI_ENABLED) { + for_all_evt_queues(adapter, eqo, i) { napi_disable(&eqo->napi); be_disable_busy_poll(eqo); } -- cgit v1.2.3-70-g09d2 From 4bebb56a6d50ca50a34048194877dca34f572f8f Mon Sep 17 00:00:00 2001 From: Somnath Kotur Date: Thu, 5 Dec 2013 12:07:55 +0530 Subject: be2net: Fix Lancer error recovery to distinguish FW download The Firmware update would be detected by looking at the sliport_error1/ sliport_error2 register values(0x02/0x00). If its not a FW reset the current messaging would take place. If the error is due to FW reset, log a message to user that "Firmware update in progress" and also do not log sliport_status and sliport_error register values. Signed-off-by: Kalesh AP Signed-off-by: Somnath Kotur Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_hw.h | 3 +++ drivers/net/ethernet/emulex/benet/be_main.c | 18 ++++++++++++++---- 2 files changed, 17 insertions(+), 4 deletions(-) (limited to 'drivers/net/ethernet/emulex') diff --git a/drivers/net/ethernet/emulex/benet/be_hw.h b/drivers/net/ethernet/emulex/benet/be_hw.h index 3e216212160..dc88782185f 100644 --- a/drivers/net/ethernet/emulex/benet/be_hw.h +++ b/drivers/net/ethernet/emulex/benet/be_hw.h @@ -64,6 +64,9 @@ #define SLIPORT_ERROR_NO_RESOURCE1 0x2 #define SLIPORT_ERROR_NO_RESOURCE2 0x9 +#define SLIPORT_ERROR_FW_RESET1 0x2 +#define SLIPORT_ERROR_FW_RESET2 0x0 + /********* Memory BAR register ************/ #define PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET 0xfc /* Host Interrupt Enable, if set interrupts are enabled although "PCI Interrupt diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index fee64bf1044..a2302dc061f 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -2464,8 +2464,16 @@ void be_detect_error(struct be_adapter *adapter) */ if (sliport_status & SLIPORT_STATUS_ERR_MASK) { adapter->hw_error = true; - dev_err(&adapter->pdev->dev, - "Error detected in the card\n"); + /* Do not log error messages if its a FW reset */ + if (sliport_err1 == SLIPORT_ERROR_FW_RESET1 && + sliport_err2 == SLIPORT_ERROR_FW_RESET2) { + dev_info(&adapter->pdev->dev, + "Firmware update in progress\n"); + return; + } else { + dev_err(&adapter->pdev->dev, + "Error detected in the card\n"); + } } if (sliport_status & SLIPORT_STATUS_ERR_MASK) { @@ -3812,6 +3820,8 @@ static int lancer_fw_download(struct be_adapter *adapter, } if (change_status == LANCER_FW_RESET_NEEDED) { + dev_info(&adapter->pdev->dev, + "Resetting adapter to activate new FW\n"); status = lancer_physdev_ctrl(adapter, PHYSDEV_CONTROL_FW_RESET_MASK); if (status) { @@ -4363,13 +4373,13 @@ static int lancer_recover_func(struct be_adapter *adapter) goto err; } - dev_err(dev, "Error recovery successful\n"); + dev_err(dev, "Adapter recovery successful\n"); return 0; err: if (status == -EAGAIN) dev_err(dev, "Waiting for resource provisioning\n"); else - dev_err(dev, "Error recovery failed\n"); + dev_err(dev, "Adapter recovery failed\n"); return status; } -- cgit v1.2.3-70-g09d2 From b05004adf9d34e7fb8e96fe6a7cdeb0843f5ab35 Mon Sep 17 00:00:00 2001 From: Somnath Kotur Date: Thu, 5 Dec 2013 12:08:16 +0530 Subject: be2net: Free/delete pmacs (in be_clear()) only if they exist During suspend-resume and lancer error recovery we will cleanup and re-initialize the resources through be_clear() and be_setup() respectively. During re-initialisation in be_setup(), if be_get_config() fails, we'll again call be_clear() which will cause a NULL pointer dereference as adapter->pmac_id is already freed. Signed-off-by: Kalesh AP Signed-off-by: Somnath Kotur Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) (limited to 'drivers/net/ethernet/emulex') diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index a2302dc061f..0fde69d5cb6 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -2940,28 +2940,35 @@ static void be_cancel_worker(struct be_adapter *adapter) } } -static int be_clear(struct be_adapter *adapter) +static void be_mac_clear(struct be_adapter *adapter) { int i; + if (adapter->pmac_id) { + for (i = 0; i < (adapter->uc_macs + 1); i++) + be_cmd_pmac_del(adapter, adapter->if_handle, + adapter->pmac_id[i], 0); + adapter->uc_macs = 0; + + kfree(adapter->pmac_id); + adapter->pmac_id = NULL; + } +} + +static int be_clear(struct be_adapter *adapter) +{ be_cancel_worker(adapter); if (sriov_enabled(adapter)) be_vf_clear(adapter); /* delete the primary mac along with the uc-mac list */ - for (i = 0; i < (adapter->uc_macs + 1); i++) - be_cmd_pmac_del(adapter, adapter->if_handle, - adapter->pmac_id[i], 0); - adapter->uc_macs = 0; + be_mac_clear(adapter); be_cmd_if_destroy(adapter, adapter->if_handle, 0); be_clear_queues(adapter); - kfree(adapter->pmac_id); - adapter->pmac_id = NULL; - be_msix_disable(adapter); return 0; } -- cgit v1.2.3-70-g09d2