From 7a399e3a2e05bc580a78ea72371b3896827f72e1 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 24 Dec 2013 12:16:01 -0200 Subject: fec: Do not assume that PHY reset is active low We should not assume that the PHY reset is always active low. Retrieve this information from the device tree instead, so that the PHY reset can work on both cases. Reported-by: Philipp Zabel Signed-off-by: Fabio Estevam Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_main.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) (limited to 'drivers/net/ethernet/freescale') diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 50bb71c663e..45b8b22b998 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -2049,6 +2049,8 @@ static void fec_reset_phy(struct platform_device *pdev) int err, phy_reset; int msec = 1; struct device_node *np = pdev->dev.of_node; + enum of_gpio_flags flags; + bool port; if (!np) return; @@ -2058,18 +2060,22 @@ static void fec_reset_phy(struct platform_device *pdev) if (msec > 1000) msec = 1; - phy_reset = of_get_named_gpio(np, "phy-reset-gpios", 0); + phy_reset = of_get_named_gpio_flags(np, "phy-reset-gpios", 0, &flags); if (!gpio_is_valid(phy_reset)) return; - err = devm_gpio_request_one(&pdev->dev, phy_reset, - GPIOF_OUT_INIT_LOW, "phy-reset"); + if (flags & OF_GPIO_ACTIVE_LOW) + port = GPIOF_OUT_INIT_LOW; + else + port = GPIOF_OUT_INIT_HIGH; + + err = devm_gpio_request_one(&pdev->dev, phy_reset, port, "phy-reset"); if (err) { dev_err(&pdev->dev, "failed to get phy-reset-gpios: %d\n", err); return; } msleep(msec); - gpio_set_value(phy_reset, 1); + gpio_set_value(phy_reset, !port); } #else /* CONFIG_OF */ static void fec_reset_phy(struct platform_device *pdev) -- cgit v1.2.3-70-g09d2