From ed616689a3d95eb6c9bdbb1ef74b0f50cbdf276a Mon Sep 17 00:00:00 2001 From: Sucheta Chakraborty Date: Thu, 22 May 2014 09:59:05 -0400 Subject: net-next:v4: Add support to configure SR-IOV VF minimum and maximum Tx rate through ip tool. o min_tx_rate puts lower limit on the VF bandwidth. VF is guaranteed to have a bandwidth of at least this value. max_tx_rate puts cap on the VF bandwidth. VF can have a bandwidth of up to this value. o A new handler set_vf_rate for attr IFLA_VF_RATE has been introduced which takes 4 arguments: netdev, VF number, min_tx_rate, max_tx_rate o ndo_set_vf_rate replaces ndo_set_vf_tx_rate handler. o Drivers that currently implement ndo_set_vf_tx_rate should now call ndo_set_vf_rate instead and reject attempt to set a minimum bandwidth greater than 0 for IFLA_VF_TX_RATE when IFLA_VF_RATE is not yet implemented by driver. o If user enters only one of either min_tx_rate or max_tx_rate, then, userland should read back the other value from driver and set both for IFLA_VF_RATE. Drivers that have not yet implemented IFLA_VF_RATE should always return min_tx_rate as 0 when read from ip tool. o If both IFLA_VF_TX_RATE and IFLA_VF_RATE options are specified, then IFLA_VF_RATE should override. o Idea is to have consistent display of rate values to user. o Usage example: - ./ip link set p4p1 vf 0 rate 900 ./ip link show p4p1 32: p4p1: mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 900 (Mbps), max_tx_rate 900Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a ./ip link set p4p1 vf 0 max_tx_rate 300 min_tx_rate 200 ./ip link show p4p1 32: p4p1: mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 300 (Mbps), max_tx_rate 300Mbps, min_tx_rate 200Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a ./ip link set p4p1 vf 0 max_tx_rate 600 rate 300 ./ip link show p4p1 32: p4p1: mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5, tx rate 600 (Mbps), max_tx_rate 600Mbps, min_tx_rate 200Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a Signed-off-by: Sucheta Chakraborty Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic.h | 1 + drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 2 +- drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov.h | 2 +- .../ethernet/qlogic/qlcnic/qlcnic_sriov_common.c | 1 + .../net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c | 52 +++++++++++++++------- 5 files changed, 41 insertions(+), 17 deletions(-) (limited to 'drivers/net/ethernet/qlogic') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 6e7527e2b59..41abe607046 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -1319,6 +1319,7 @@ struct qlcnic_eswitch { #define QL_STATUS_INVALID_PARAM -1 #define MAX_BW 100 /* % of link speed */ +#define MIN_BW 1 /* % of link speed */ #define MAX_VLAN_ID 4095 #define MIN_VLAN_ID 2 #define DEFAULT_MAC_LEARN 1 diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index f0a285359e6..f06ba90b428 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -525,7 +525,7 @@ static const struct net_device_ops qlcnic_netdev_ops = { #endif #ifdef CONFIG_QLCNIC_SRIOV .ndo_set_vf_mac = qlcnic_sriov_set_vf_mac, - .ndo_set_vf_tx_rate = qlcnic_sriov_set_vf_tx_rate, + .ndo_set_vf_rate = qlcnic_sriov_set_vf_tx_rate, .ndo_get_vf_config = qlcnic_sriov_get_vf_config, .ndo_set_vf_vlan = qlcnic_sriov_set_vf_vlan, .ndo_set_vf_spoofchk = qlcnic_sriov_set_vf_spoofchk, diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov.h index 335b50f7bd3..4677b2edccc 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov.h @@ -233,7 +233,7 @@ bool qlcnic_sriov_soft_flr_check(struct qlcnic_adapter *, void qlcnic_sriov_pf_reset(struct qlcnic_adapter *); int qlcnic_sriov_pf_reinit(struct qlcnic_adapter *); int qlcnic_sriov_set_vf_mac(struct net_device *, int, u8 *); -int qlcnic_sriov_set_vf_tx_rate(struct net_device *, int, int); +int qlcnic_sriov_set_vf_tx_rate(struct net_device *, int, int, int); int qlcnic_sriov_get_vf_config(struct net_device *, int , struct ifla_vf_info *); int qlcnic_sriov_set_vf_vlan(struct net_device *, int, u16, u8); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c index 498fa6350c8..2bdd9deffb3 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c @@ -201,6 +201,7 @@ int qlcnic_sriov_init(struct qlcnic_adapter *adapter, int num_vfs) sriov->vf_info[i].vp = vp; vp->vlan_mode = QLC_GUEST_VLAN_MODE; vp->max_tx_bw = MAX_BW; + vp->min_tx_bw = MIN_BW; vp->spoofchk = false; random_ether_addr(vp->mac); dev_info(&adapter->pdev->dev, diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c index 6d2f72f114f..a29538b86ed 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c @@ -1848,7 +1848,8 @@ int qlcnic_sriov_set_vf_mac(struct net_device *netdev, int vf, u8 *mac) return 0; } -int qlcnic_sriov_set_vf_tx_rate(struct net_device *netdev, int vf, int tx_rate) +int qlcnic_sriov_set_vf_tx_rate(struct net_device *netdev, int vf, + int min_tx_rate, int max_tx_rate) { struct qlcnic_adapter *adapter = netdev_priv(netdev); struct qlcnic_sriov *sriov = adapter->ahw->sriov; @@ -1863,35 +1864,52 @@ int qlcnic_sriov_set_vf_tx_rate(struct net_device *netdev, int vf, int tx_rate) if (vf >= sriov->num_vfs) return -EINVAL; - if (tx_rate >= 10000 || tx_rate < 100) { + vf_info = &sriov->vf_info[vf]; + vp = vf_info->vp; + vpid = vp->handle; + + if (!min_tx_rate) + min_tx_rate = QLC_VF_MIN_TX_RATE; + + if (max_tx_rate && + (max_tx_rate >= 10000 || max_tx_rate < min_tx_rate)) { netdev_err(netdev, - "Invalid Tx rate, allowed range is [%d - %d]", - QLC_VF_MIN_TX_RATE, QLC_VF_MAX_TX_RATE); + "Invalid max Tx rate, allowed range is [%d - %d]", + min_tx_rate, QLC_VF_MAX_TX_RATE); return -EINVAL; } - if (tx_rate == 0) - tx_rate = 10000; + if (!max_tx_rate) + max_tx_rate = 10000; - vf_info = &sriov->vf_info[vf]; - vp = vf_info->vp; - vpid = vp->handle; + if (min_tx_rate && + (min_tx_rate > max_tx_rate || min_tx_rate < QLC_VF_MIN_TX_RATE)) { + netdev_err(netdev, + "Invalid min Tx rate, allowed range is [%d - %d]", + QLC_VF_MIN_TX_RATE, max_tx_rate); + return -EINVAL; + } if (test_bit(QLC_BC_VF_STATE, &vf_info->state)) { if (qlcnic_sriov_get_vf_vport_info(adapter, &nic_info, vpid)) return -EIO; - nic_info.max_tx_bw = tx_rate / 100; + nic_info.max_tx_bw = max_tx_rate / 100; + nic_info.min_tx_bw = min_tx_rate / 100; nic_info.bit_offsets = BIT_0; if (qlcnic_sriov_pf_set_vport_info(adapter, &nic_info, vpid)) return -EIO; } - vp->max_tx_bw = tx_rate / 100; + vp->max_tx_bw = max_tx_rate / 100; + netdev_info(netdev, + "Setting Max Tx rate %d (Mbps), %d %% of PF bandwidth, for VF %d\n", + max_tx_rate, vp->max_tx_bw, vf); + vp->min_tx_bw = min_tx_rate / 100; netdev_info(netdev, - "Setting Tx rate %d (Mbps), %d %% of PF bandwidth, for VF %d\n", - tx_rate, vp->max_tx_bw, vf); + "Setting Min Tx rate %d (Mbps), %d %% of PF bandwidth, for VF %d\n", + min_tx_rate, vp->min_tx_bw, vf); return 0; } @@ -1990,9 +2008,13 @@ int qlcnic_sriov_get_vf_config(struct net_device *netdev, ivi->qos = vp->qos; ivi->spoofchk = vp->spoofchk; if (vp->max_tx_bw == MAX_BW) - ivi->tx_rate = 0; + ivi->max_tx_rate = 0; + else + ivi->max_tx_rate = vp->max_tx_bw * 100; + if (vp->min_tx_bw == MIN_BW) + ivi->min_tx_rate = 0; else - ivi->tx_rate = vp->max_tx_bw * 100; + ivi->min_tx_rate = vp->min_tx_bw * 100; ivi->vf = vf; return 0; -- cgit v1.2.3-70-g09d2