From 0aa1538f4e4bab366023f4c414555e4ed25994e6 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Fri, 11 Jul 2008 00:33:52 +0200 Subject: gianfar: delete non NAPI code from the driver. Compile-tested only. Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/gianfar.c | 76 ++++----------------------------------------------- 1 file changed, 6 insertions(+), 70 deletions(-) (limited to 'drivers/net/gianfar.c') diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 393a0f17530..fa78d687012 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -44,8 +44,7 @@ * happen immediately, but will wait until either a set number * of frames or amount of time have passed). In NAPI, the * interrupt handler will signal there is work to be done, and - * exit. Without NAPI, the packet(s) will be handled - * immediately. Both methods will start at the last known empty + * exit. This method will start at the last known empty * descriptor, and process every subsequent descriptor until there * are none left with data (NAPI will stop after a set number of * packets to give time to other tasks, but will eventually @@ -101,12 +100,6 @@ #undef BRIEF_GFAR_ERRORS #undef VERBOSE_GFAR_ERRORS -#ifdef CONFIG_GFAR_NAPI -#define RECEIVE(x) netif_receive_skb(x) -#else -#define RECEIVE(x) netif_rx(x) -#endif - const char gfar_driver_name[] = "Gianfar Ethernet"; const char gfar_driver_version[] = "1.3"; @@ -131,9 +124,7 @@ static void free_skb_resources(struct gfar_private *priv); static void gfar_set_multi(struct net_device *dev); static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr); static void gfar_configure_serdes(struct net_device *dev); -#ifdef CONFIG_GFAR_NAPI static int gfar_poll(struct napi_struct *napi, int budget); -#endif #ifdef CONFIG_NET_POLL_CONTROLLER static void gfar_netpoll(struct net_device *dev); #endif @@ -260,9 +251,7 @@ static int gfar_probe(struct platform_device *pdev) dev->hard_start_xmit = gfar_start_xmit; dev->tx_timeout = gfar_timeout; dev->watchdog_timeo = TX_TIMEOUT; -#ifdef CONFIG_GFAR_NAPI netif_napi_add(dev, &priv->napi, gfar_poll, GFAR_DEV_WEIGHT); -#endif #ifdef CONFIG_NET_POLL_CONTROLLER dev->poll_controller = gfar_netpoll; #endif @@ -363,11 +352,7 @@ static int gfar_probe(struct platform_device *pdev) /* Even more device info helps when determining which kernel */ /* provided which set of benchmarks. */ -#ifdef CONFIG_GFAR_NAPI printk(KERN_INFO "%s: Running with NAPI enabled\n", dev->name); -#else - printk(KERN_INFO "%s: Running with NAPI disabled\n", dev->name); -#endif printk(KERN_INFO "%s: %d/%d RX/TX BD ring size\n", dev->name, priv->rx_ring_size, priv->tx_ring_size); @@ -945,14 +930,10 @@ tx_skb_fail: /* Returns 0 for success. */ static int gfar_enet_open(struct net_device *dev) { -#ifdef CONFIG_GFAR_NAPI struct gfar_private *priv = netdev_priv(dev); -#endif int err; -#ifdef CONFIG_GFAR_NAPI napi_enable(&priv->napi); -#endif /* Initialize a bunch of registers */ init_registers(dev); @@ -962,17 +943,13 @@ static int gfar_enet_open(struct net_device *dev) err = init_phy(dev); if(err) { -#ifdef CONFIG_GFAR_NAPI napi_disable(&priv->napi); -#endif return err; } err = startup_gfar(dev); if (err) { -#ifdef CONFIG_GFAR_NAPI napi_disable(&priv->napi); -#endif return err; } @@ -1128,9 +1105,7 @@ static int gfar_close(struct net_device *dev) { struct gfar_private *priv = netdev_priv(dev); -#ifdef CONFIG_GFAR_NAPI napi_disable(&priv->napi); -#endif stop_gfar(dev); @@ -1427,14 +1402,9 @@ irqreturn_t gfar_receive(int irq, void *dev_id) { struct net_device *dev = (struct net_device *) dev_id; struct gfar_private *priv = netdev_priv(dev); -#ifdef CONFIG_GFAR_NAPI u32 tempval; -#else - unsigned long flags; -#endif /* support NAPI */ -#ifdef CONFIG_GFAR_NAPI /* Clear IEVENT, so interrupts aren't called again * because of the packets that have already arrived */ gfar_write(&priv->regs->ievent, IEVENT_RTX_MASK); @@ -1451,38 +1421,10 @@ irqreturn_t gfar_receive(int irq, void *dev_id) dev->name, gfar_read(&priv->regs->ievent), gfar_read(&priv->regs->imask)); } -#else - /* Clear IEVENT, so rx interrupt isn't called again - * because of this interrupt */ - gfar_write(&priv->regs->ievent, IEVENT_RX_MASK); - - spin_lock_irqsave(&priv->rxlock, flags); - gfar_clean_rx_ring(dev, priv->rx_ring_size); - - /* If we are coalescing interrupts, update the timer */ - /* Otherwise, clear it */ - if (likely(priv->rxcoalescing)) { - gfar_write(&priv->regs->rxic, 0); - gfar_write(&priv->regs->rxic, - mk_ic_value(priv->rxcount, priv->rxtime)); - } - - spin_unlock_irqrestore(&priv->rxlock, flags); -#endif return IRQ_HANDLED; } -static inline int gfar_rx_vlan(struct sk_buff *skb, - struct vlan_group *vlgrp, unsigned short vlctl) -{ -#ifdef CONFIG_GFAR_NAPI - return vlan_hwaccel_receive_skb(skb, vlgrp, vlctl); -#else - return vlan_hwaccel_rx(skb, vlgrp, vlctl); -#endif -} - static inline void gfar_rx_checksum(struct sk_buff *skb, struct rxfcb *fcb) { /* If valid headers were found, and valid sums @@ -1539,10 +1481,11 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, skb->protocol = eth_type_trans(skb, dev); /* Send the packet up the stack */ - if (unlikely(priv->vlgrp && (fcb->flags & RXFCB_VLN))) - ret = gfar_rx_vlan(skb, priv->vlgrp, fcb->vlctl); - else - ret = RECEIVE(skb); + if (unlikely(priv->vlgrp && (fcb->flags & RXFCB_VLN))) { + ret = vlan_hwaccel_receive_skb(skb, priv->vlgrp, + fcb->vlctl); + } else + ret = netif_receive_skb(skb); if (NET_RX_DROP == ret) priv->extra_stats.kernel_dropped++; @@ -1629,7 +1572,6 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit) return howmany; } -#ifdef CONFIG_GFAR_NAPI static int gfar_poll(struct napi_struct *napi, int budget) { struct gfar_private *priv = container_of(napi, struct gfar_private, napi); @@ -1664,7 +1606,6 @@ static int gfar_poll(struct napi_struct *napi, int budget) return howmany; } -#endif #ifdef CONFIG_NET_POLL_CONTROLLER /* @@ -2003,11 +1944,6 @@ static irqreturn_t gfar_error(int irq, void *dev_id) gfar_receive(irq, dev_id); -#ifndef CONFIG_GFAR_NAPI - /* Clear the halt bit in RSTAT */ - gfar_write(&priv->regs->rstat, RSTAT_CLEAR_RHALT); -#endif - if (netif_msg_rx_err(priv)) printk(KERN_DEBUG "%s: busy error (rstat: %x)\n", dev->name, gfar_read(&priv->regs->rstat)); -- cgit v1.2.3-70-g09d2