From 1d3bb996481e116f5f2b127cbd29b83365d2cf62 Mon Sep 17 00:00:00 2001 From: David Gibson Date: Thu, 23 Aug 2007 13:56:01 +1000 Subject: Device tree aware EMAC driver Based on BenH's earlier work, this is a new version of the EMAC driver for the built-in ethernet found on PowerPC 4xx embedded CPUs. The same ASIC is also found in the Axon bridge chip. This new version is designed to work in the arch/powerpc tree, using the device tree to probe the device, rather than the old and ugly arch/ppc OCP layer. This driver is designed to sit alongside the old driver (that lies in drivers/net/ibm_emac and this one in drivers/net/ibm_newemac). The old driver is left in place to support arch/ppc until arch/ppc itself reaches its final demise (not too long now, with luck). This driver still has a number of things that could do with cleaning up, but I think they can be fixed up after merging. Specifically: - Should be adjusted to properly use the dma mapping API. Axon needs this. - Probe logic needs reworking, in conjuction with the general probing code for of_platform devices. The dependencies here between EMAC, MAL, ZMII etc. make this complicated. At present, it usually works, because we initialize and register the sub-drivers before the EMAC driver itself, and (being in driver code) runs after the devices themselves have been instantiated from the device tree. Signed-off-by: David Gibson Signed-off-by: Jeff Garzik --- drivers/net/ibm_newemac/rgmii.c | 323 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 323 insertions(+) create mode 100644 drivers/net/ibm_newemac/rgmii.c (limited to 'drivers/net/ibm_newemac/rgmii.c') diff --git a/drivers/net/ibm_newemac/rgmii.c b/drivers/net/ibm_newemac/rgmii.c new file mode 100644 index 00000000000..bcd7fc639c4 --- /dev/null +++ b/drivers/net/ibm_newemac/rgmii.c @@ -0,0 +1,323 @@ +/* + * drivers/net/ibm_newemac/rgmii.c + * + * Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support. + * + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin or + * + * Based on original work by + * Matt Porter + * Copyright 2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include +#include +#include + +#include "emac.h" +#include "debug.h" + +// XXX FIXME: Axon seems to support a subset of the RGMII, we +// thus need to take that into account and possibly change some +// of the bit settings below that don't seem to quite match the +// AXON spec + +/* RGMIIx_FER */ +#define RGMII_FER_MASK(idx) (0x7 << ((idx) * 4)) +#define RGMII_FER_RTBI(idx) (0x4 << ((idx) * 4)) +#define RGMII_FER_RGMII(idx) (0x5 << ((idx) * 4)) +#define RGMII_FER_TBI(idx) (0x6 << ((idx) * 4)) +#define RGMII_FER_GMII(idx) (0x7 << ((idx) * 4)) + +/* RGMIIx_SSR */ +#define RGMII_SSR_MASK(idx) (0x7 << ((idx) * 8)) +#define RGMII_SSR_100(idx) (0x2 << ((idx) * 8)) +#define RGMII_SSR_1000(idx) (0x4 << ((idx) * 8)) + +/* RGMII bridge supports only GMII/TBI and RGMII/RTBI PHYs */ +static inline int rgmii_valid_mode(int phy_mode) +{ + return phy_mode == PHY_MODE_GMII || + phy_mode == PHY_MODE_RGMII || + phy_mode == PHY_MODE_TBI || + phy_mode == PHY_MODE_RTBI; +} + +static inline const char *rgmii_mode_name(int mode) +{ + switch (mode) { + case PHY_MODE_RGMII: + return "RGMII"; + case PHY_MODE_TBI: + return "TBI"; + case PHY_MODE_GMII: + return "GMII"; + case PHY_MODE_RTBI: + return "RTBI"; + default: + BUG(); + } +} + +static inline u32 rgmii_mode_mask(int mode, int input) +{ + switch (mode) { + case PHY_MODE_RGMII: + return RGMII_FER_RGMII(input); + case PHY_MODE_TBI: + return RGMII_FER_TBI(input); + case PHY_MODE_GMII: + return RGMII_FER_GMII(input); + case PHY_MODE_RTBI: + return RGMII_FER_RTBI(input); + default: + BUG(); + } +} + +int __devinit rgmii_attach(struct of_device *ofdev, int input, int mode) +{ + struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev); + struct rgmii_regs *p = dev->base; + + RGMII_DBG(dev, "attach(%d)" NL, input); + + /* Check if we need to attach to a RGMII */ + if (input < 0 || !rgmii_valid_mode(mode)) { + printk(KERN_ERR "%s: unsupported settings !\n", + ofdev->node->full_name); + return -ENODEV; + } + + mutex_lock(&dev->lock); + + /* Enable this input */ + out_be32(&p->fer, in_be32(&p->fer) | rgmii_mode_mask(mode, input)); + + printk(KERN_NOTICE "%s: input %d in %s mode\n", + ofdev->node->full_name, input, rgmii_mode_name(mode)); + + ++dev->users; + + mutex_unlock(&dev->lock); + + return 0; +} + +void rgmii_set_speed(struct of_device *ofdev, int input, int speed) +{ + struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev); + struct rgmii_regs *p = dev->base; + u32 ssr; + + mutex_lock(&dev->lock); + + ssr = in_be32(&p->ssr) & ~RGMII_SSR_MASK(input); + + RGMII_DBG(dev, "speed(%d, %d)" NL, input, speed); + + if (speed == SPEED_1000) + ssr |= RGMII_SSR_1000(input); + else if (speed == SPEED_100) + ssr |= RGMII_SSR_100(input); + + out_be32(&p->ssr, ssr); + + mutex_unlock(&dev->lock); +} + +void rgmii_get_mdio(struct of_device *ofdev, int input) +{ + struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev); + struct rgmii_regs *p = dev->base; + u32 fer; + + RGMII_DBG2(dev, "get_mdio(%d)" NL, input); + + if (dev->type != RGMII_AXON) + return; + + mutex_lock(&dev->lock); + + fer = in_be32(&p->fer); + fer |= 0x00080000u >> input; + out_be32(&p->fer, fer); + (void)in_be32(&p->fer); + + DBG2(dev, " fer = 0x%08x\n", fer); +} + +void rgmii_put_mdio(struct of_device *ofdev, int input) +{ + struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev); + struct rgmii_regs *p = dev->base; + u32 fer; + + RGMII_DBG2(dev, "put_mdio(%d)" NL, input); + + if (dev->type != RGMII_AXON) + return; + + fer = in_be32(&p->fer); + fer &= ~(0x00080000u >> input); + out_be32(&p->fer, fer); + (void)in_be32(&p->fer); + + DBG2(dev, " fer = 0x%08x\n", fer); + + mutex_unlock(&dev->lock); +} + +void __devexit rgmii_detach(struct of_device *ofdev, int input) +{ + struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev); + struct rgmii_regs *p = dev->base; + + mutex_lock(&dev->lock); + + BUG_ON(!dev || dev->users == 0); + + RGMII_DBG(dev, "detach(%d)" NL, input); + + /* Disable this input */ + out_be32(&p->fer, in_be32(&p->fer) & ~RGMII_FER_MASK(input)); + + --dev->users; + + mutex_unlock(&dev->lock); +} + +int rgmii_get_regs_len(struct of_device *ofdev) +{ + return sizeof(struct emac_ethtool_regs_subhdr) + + sizeof(struct rgmii_regs); +} + +void *rgmii_dump_regs(struct of_device *ofdev, void *buf) +{ + struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev); + struct emac_ethtool_regs_subhdr *hdr = buf; + struct rgmii_regs *regs = (struct rgmii_regs *)(hdr + 1); + + hdr->version = 0; + hdr->index = 0; /* for now, are there chips with more than one + * rgmii ? if yes, then we'll add a cell_index + * like we do for emac + */ + memcpy_fromio(regs, dev->base, sizeof(struct rgmii_regs)); + return regs + 1; +} + + +static int __devinit rgmii_probe(struct of_device *ofdev, + const struct of_device_id *match) +{ + struct device_node *np = ofdev->node; + struct rgmii_instance *dev; + struct resource regs; + int rc; + + rc = -ENOMEM; + dev = kzalloc(sizeof(struct rgmii_instance), GFP_KERNEL); + if (dev == NULL) { + printk(KERN_ERR "%s: could not allocate RGMII device!\n", + np->full_name); + goto err_gone; + } + + mutex_init(&dev->lock); + dev->ofdev = ofdev; + + rc = -ENXIO; + if (of_address_to_resource(np, 0, ®s)) { + printk(KERN_ERR "%s: Can't get registers address\n", + np->full_name); + goto err_free; + } + + rc = -ENOMEM; + dev->base = (struct rgmii_regs *)ioremap(regs.start, + sizeof(struct rgmii_regs)); + if (dev->base == NULL) { + printk(KERN_ERR "%s: Can't map device registers!\n", + np->full_name); + goto err_free; + } + + /* Check for RGMII type */ + if (device_is_compatible(ofdev->node, "ibm,rgmii-axon")) + dev->type = RGMII_AXON; + else + dev->type = RGMII_STANDARD; + + DBG2(dev, " Boot FER = 0x%08x, SSR = 0x%08x\n", + in_be32(&dev->base->fer), in_be32(&dev->base->ssr)); + + /* Disable all inputs by default */ + out_be32(&dev->base->fer, 0); + + printk(KERN_INFO + "RGMII %s %s initialized\n", + dev->type == RGMII_STANDARD ? "standard" : "axon", + ofdev->node->full_name); + + wmb(); + dev_set_drvdata(&ofdev->dev, dev); + + return 0; + + err_free: + kfree(dev); + err_gone: + return rc; +} + +static int __devexit rgmii_remove(struct of_device *ofdev) +{ + struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev); + + dev_set_drvdata(&ofdev->dev, NULL); + + WARN_ON(dev->users != 0); + + iounmap(dev->base); + kfree(dev); + + return 0; +} + +static struct of_device_id rgmii_match[] = +{ + { + .type = "rgmii-interface", + .compatible = "ibm,rgmii", + }, + { + .type = "emac-rgmii", + }, + {}, +}; + +static struct of_platform_driver rgmii_driver = { + .name = "emac-rgmii", + .match_table = rgmii_match, + + .probe = rgmii_probe, + .remove = rgmii_remove, +}; + +int __init rgmii_init(void) +{ + return of_register_platform_driver(&rgmii_driver); +} + +void rgmii_exit(void) +{ + of_unregister_platform_driver(&rgmii_driver); +} -- cgit v1.2.3-70-g09d2