From a8d2a0c27f84bdbf54b7e1c1a52ef7b8b7196dbc Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Fri, 6 Feb 2009 23:17:26 +0000 Subject: igb: rename phy ops This patch renames write_phy_reg to write_reg and read_phy_reg to read_reg. It seems redundant to call out phy in an operation that is part of the phy_ops struct. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igb/e1000_82575.c | 38 +++++++++++++++++++------------------- 1 file changed, 19 insertions(+), 19 deletions(-) (limited to 'drivers/net/igb/e1000_82575.c') diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index ed9e8c0333a..9a66e345729 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -179,13 +179,13 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) /* PHY function pointers */ if (igb_sgmii_active_82575(hw)) { - phy->ops.reset_phy = igb_phy_hw_reset_sgmii_82575; - phy->ops.read_phy_reg = igb_read_phy_reg_sgmii_82575; - phy->ops.write_phy_reg = igb_write_phy_reg_sgmii_82575; + phy->ops.reset = igb_phy_hw_reset_sgmii_82575; + phy->ops.read_reg = igb_read_phy_reg_sgmii_82575; + phy->ops.write_reg = igb_write_phy_reg_sgmii_82575; } else { - phy->ops.reset_phy = igb_phy_hw_reset; - phy->ops.read_phy_reg = igb_read_phy_reg_igp; - phy->ops.write_phy_reg = igb_write_phy_reg_igp; + phy->ops.reset = igb_phy_hw_reset; + phy->ops.read_reg = igb_read_phy_reg_igp; + phy->ops.write_reg = igb_write_phy_reg_igp; } /* Set phy->phy_addr and phy->id. */ @@ -435,7 +435,7 @@ static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *hw) * SFP documentation requires the following to configure the SPF module * to work on SGMII. No further documentation is given. */ - ret_val = hw->phy.ops.write_phy_reg(hw, 0x1B, 0x8084); + ret_val = hw->phy.ops.write_reg(hw, 0x1B, 0x8084); if (ret_val) goto out; @@ -464,28 +464,28 @@ static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *hw, bool active) s32 ret_val; u16 data; - ret_val = phy->ops.read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data); + ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data); if (ret_val) goto out; if (active) { data |= IGP02E1000_PM_D0_LPLU; - ret_val = phy->ops.write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, + ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT, data); if (ret_val) goto out; /* When LPLU is enabled, we should disable SmartSpeed */ - ret_val = phy->ops.read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &data); data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = phy->ops.write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG, data); if (ret_val) goto out; } else { data &= ~IGP02E1000_PM_D0_LPLU; - ret_val = phy->ops.write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, + ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT, data); /* * LPLU and SmartSpeed are mutually exclusive. LPLU is used @@ -494,24 +494,24 @@ static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *hw, bool active) * SmartSpeed, so performance is maintained. */ if (phy->smart_speed == e1000_smart_speed_on) { - ret_val = phy->ops.read_phy_reg(hw, + ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &data); if (ret_val) goto out; data |= IGP01E1000_PSCFR_SMART_SPEED; - ret_val = phy->ops.write_phy_reg(hw, + ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG, data); if (ret_val) goto out; } else if (phy->smart_speed == e1000_smart_speed_off) { - ret_val = phy->ops.read_phy_reg(hw, + ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &data); if (ret_val) goto out; data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = phy->ops.write_phy_reg(hw, + ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG, data); if (ret_val) goto out; @@ -1035,7 +1035,7 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw) * depending on user settings. */ hw_dbg("Forcing Speed and Duplex\n"); - ret_val = igb_phy_force_speed_duplex(hw); + ret_val = hw->phy.ops.force_speed_duplex(hw); if (ret_val) { hw_dbg("Error Forcing Speed and Duplex\n"); goto out; @@ -1423,9 +1423,9 @@ static struct e1000_mac_operations e1000_mac_ops_82575 = { }; static struct e1000_phy_operations e1000_phy_ops_82575 = { - .acquire_phy = igb_acquire_phy_82575, + .acquire = igb_acquire_phy_82575, .get_cfg_done = igb_get_cfg_done_82575, - .release_phy = igb_release_phy_82575, + .release = igb_release_phy_82575, }; static struct e1000_nvm_operations e1000_nvm_ops_82575 = { -- cgit v1.2.3-70-g09d2