From 1ea739a5f9f469a57d804ebcf70514b8a5efe9da Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 15 May 2006 12:25:29 -0700 Subject: The ixp2000 driver for the enp2611 was developed on a board with three gigabit ports, but some enp2611 models only have two ports (and only one onboard PM3386.) The current driver assumes there are always three ports and so it doesn't work on the two-port version of the board at all. This patch adds a bit of logic to the enp2611 driver to limit the number of ports to 2 if the second PM3386 isn't detected. Signed-off-by: Lennert Buytenhek Signed-off-by: Stephen Hemminger --- drivers/net/ixp2000/enp2611.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers/net/ixp2000/enp2611.c') diff --git a/drivers/net/ixp2000/enp2611.c b/drivers/net/ixp2000/enp2611.c index 6f7dce8eba5..b67f586d739 100644 --- a/drivers/net/ixp2000/enp2611.c +++ b/drivers/net/ixp2000/enp2611.c @@ -149,6 +149,8 @@ static void enp2611_check_link_status(unsigned long __dummy) int status; dev = nds[i]; + if (dev == NULL) + continue; status = pm3386_is_link_up(i); if (status && !netif_carrier_ok(dev)) { @@ -191,6 +193,7 @@ static void enp2611_set_port_admin_status(int port, int up) static int __init enp2611_init_module(void) { + int ports; int i; if (!machine_is_enp2611()) @@ -199,7 +202,8 @@ static int __init enp2611_init_module(void) caleb_reset(); pm3386_reset(); - for (i = 0; i < 3; i++) { + ports = pm3386_port_count(); + for (i = 0; i < ports; i++) { nds[i] = ixpdev_alloc(i, sizeof(struct enp2611_ixpdev_priv)); if (nds[i] == NULL) { while (--i >= 0) @@ -215,9 +219,10 @@ static int __init enp2611_init_module(void) ixp2400_msf_init(&enp2611_msf_parameters); - if (ixpdev_init(3, nds, enp2611_set_port_admin_status)) { - for (i = 0; i < 3; i++) - free_netdev(nds[i]); + if (ixpdev_init(ports, nds, enp2611_set_port_admin_status)) { + for (i = 0; i < ports; i++) + if (nds[i]) + free_netdev(nds[i]); return -EINVAL; } -- cgit v1.2.3-70-g09d2