From 2d6a7b7559b47f81c50a1df91910edefff79b9b4 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Mon, 29 Dec 2008 18:38:54 -0800 Subject: mlx4_en: Always allocate RX ring for each interrupt vector Removed module parameter specifying number of RX rings Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/mlx4/en_params.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers/net/mlx4/en_params.c') diff --git a/drivers/net/mlx4/en_params.c b/drivers/net/mlx4/en_params.c index 047b37f5a74..6483ae9d45b 100644 --- a/drivers/net/mlx4/en_params.c +++ b/drivers/net/mlx4/en_params.c @@ -65,9 +65,6 @@ MLX4_EN_PARM_INT(pfctx, 0, "Priority based Flow Control policy on TX[7:0]." MLX4_EN_PARM_INT(pfcrx, 0, "Priority based Flow Control policy on RX[7:0]." " Per priority bit mask"); -MLX4_EN_PARM_INT(rx_ring_num1, 0, "Number or Rx rings for port 1 (0 = #cores)"); -MLX4_EN_PARM_INT(rx_ring_num2, 0, "Number or Rx rings for port 2 (0 = #cores)"); - MLX4_EN_PARM_INT(tx_ring_size1, MLX4_EN_AUTO_CONF, "Tx ring size for port 1"); MLX4_EN_PARM_INT(tx_ring_size2, MLX4_EN_AUTO_CONF, "Tx ring size for port 2"); MLX4_EN_PARM_INT(rx_ring_size1, MLX4_EN_AUTO_CONF, "Rx ring size for port 1"); @@ -95,8 +92,6 @@ int mlx4_en_get_profile(struct mlx4_en_dev *mdev) params->prof[1].tx_ring_num = 1; params->prof[2].tx_ring_num = 1; } - params->prof[1].rx_ring_num = min_t(int, rx_ring_num1, MAX_RX_RINGS); - params->prof[2].rx_ring_num = min_t(int, rx_ring_num2, MAX_RX_RINGS); if (tx_ring_size1 == MLX4_EN_AUTO_CONF) tx_ring_size1 = MLX4_EN_DEF_TX_RING_SIZE; -- cgit v1.2.3-70-g09d2